The amount of oxygen released can be calculated using Henry's law, while the solubility of oxygen can be determined by multiplying the Henry's law constant by the partial pressure of oxygen in air.
How can the amount of oxygen released from water and the solubility of oxygen in water be determined?When the atmospheric pressure changes from 1.00 atm to 0.895 atm at 298 K, the amount of oxygen released from 3.20 L of water can be calculated using Henry's law. The solubility of oxygen in water can be determined using the Henry's law constant and the partial pressure of oxygen in the air.
To calculate the amount of oxygen released, we need to know the initial concentration of dissolved oxygen in water. Without this information, we cannot determine the exact amount of oxygen released.
The solubility of oxygen in water exposed to air at 1.00 atm can be calculated by multiplying the Henry's law constant (0.00130 M/atm) by the partial pressure of oxygen in air (0.21 atm, considering 21% oxygen in air).
Similarly, the solubility of oxygen in water exposed to air at 0.895 atm can be calculated using the same Henry's law constant and the corresponding partial pressure of oxygen in air.
Without the specific values for the initial concentration of dissolved oxygen and the partial pressure of oxygen in air, we cannot provide the exact solubility values or the amount of oxygen released.
Learn more about oxygen
brainly.com/question/13905823
#SPJ11
Determine the charge on each ion in the following compounds, and name the compound. Spelling counts! (a.) Li20 (b.) CaS
The charge on each ion in Li2O is +1 and -2
The charge on each ion in CaS is +2 and -2
a.
The formula for lithium oxide is Li2O.
Oxygen, with an electron configuration of 1s²2s²2p⁴, has six valence electrons.
Lithium has a total of three electrons in its outermost shell.
Therefore, one electron must be lost by each Li to achieve the stable octet arrangement of the nearest noble gas (neon) configuration 1s²2s²2p⁶.
The cation Li+ has a charge of +1, and the anion O2- has a charge of -2.
Therefore, Li2O has a total charge of zero.
Each Li+ has a charge of +1, while each O2- has a charge of -2.
As a result, the charge on each ion in Li2O is +1 and -2, respectively.
The name of the compound is lithium oxide.
b.
Calcium sulfide's chemical formula is CaS.
The Ca2+ cation has two valence electrons, while the sulfur anion has six valence electrons.
In order to achieve stable octet configuration, the calcium atom must lose both valence electrons, resulting in the Ca2+ cation.
The electron configuration of S is 1s²2s²2p⁶3s²3p⁴, and it requires two electrons to achieve a noble gas (argon) configuration.
It is therefore gaining two electrons to form the sulfide anion, S2-.
The overall charge of the compound CaS is zero.
Each Ca2+ has a charge of +2, while each S2- has a charge of -2.
Therefore, the charge on each ion in CaS is +2 and -2, respectively.
The name of the compound is calcium sulfide.
Learn more about the valence electrons:
brainly.com/question/371590
#SPJ11
Hydrogen gas can be synthesized by reacting zinc metal with aqueous HCl: Zn(s) + 2HCl(aq) ?H2(g) + ZnCl2(aq) What volume of hydrogen would be formed at if 25.5 g of zinc were reacted with an excess of acid at 742 mmHg and 15.0°C? a) 4.72 L b) 9.44 L c) 12.3 L d) 15.7 L e) 22.4 L
Stoichiometry of chemical reactions: 2 moles of HCl reacts with 1 mole of Zn to form 1 mole of H2 gas1 mole of any gas occupies 22.4 L at STP(Standard Temperature and Pressure), where STP = 0°C or 273 K and 1 atm pressure STP is not given in the problem.
Given data: mass of zinc, m = 25.5 g
Pressure, P = 742 mmHg
Temperature, T = 15°C = 15 + 273 = 288 K
To find: Volume of hydrogen gas produced Concepts used: Ideal gas law equation, Stoichiometry of chemical reactions Ideal gas law equation:
PV = nRT
Where,P = Pressure, V = Volume of gas, n = Number of moles of gas, R = Universal gas constant, T = Temperature of gas.
Stoichiometry of chemical reactions: 2 moles of HCl reacts with 1 mole of Zn to form 1 mole of H2 gas1 mole of any gas occupies 22.4 L at STP(Standard Temperature and Pressure), where STP = 0°C or 273 K and 1 atm pressure STP is not given in the problem. So, we use the ideal gas law equation to find the volume of hydrogen gas produced.
Steps involved: Find the number of moles of Zn from its mass using its molar mass. Use the stoichiometry of chemical reaction to find the number of moles of H2 gas produced using the number of moles of Zn gas found in step 1. Use the ideal gas law equation to find the volume of H2 gas produced.1. Find the number of moles of Zn. Molar mass of Zn, M(Zn) = 65.38 g/mol,
Number of moles of Zn = mass of Zn / M(Zn)= 25.5 g / 65.38 g/mol≈ 0.3908 mol2.
Find the number of moles of H2 produced using stoichiometry of the chemical reaction. 2 moles of HCl reacts with 1 mole of Zn to form 1 mole of H2 gas 0.3908 mole of Zn produces = 0.5 × 0.3908 = 0.1954 mole of H2 gas3. Use the ideal gas law equation to find the volume of H2 gas produced. Pressure, P = 742 mmHg, Volume, V = ?, Number of moles, n = 0.1954 mol, Temperature, T = 288 K, Universal gas constant, R = 0.0821 L atm K^-1 mol^-1
PV = nRTV = nRT / P= 0.1954 × 0.0821 × 288 / 742= 0.0067 L≈ 6.7 mL = 6.7 × 10^-3 L
Answer: The volume of hydrogen gas produced is 6.7 mL. The correct option is none of the above as none of the given options match with the calculated answer. Note: The answer is obtained in milliliters, which is converted to liters by dividing it by 1000.
To know more about Stoichiometry visit: https://brainly.com/question/28780091
#SPJ11
the following equation describes properly the solubility product of kno3:
The equation that describes the solubility product of KNO3 is KNO3 (s) ↔ K+ (aq) + NO3- (aq).
Solubility is a measure of the maximum amount of solute that can dissolve in a solvent at a given temperature. The solubility product constant (Ksp) is the product of the molar concentrations of the ions in a saturated solution, and it represents the maximum product of the concentrations of the ions at which a solution is still saturated.KNO3 dissolves in water to produce the K+ and NO3- ions, and the solubility product of KNO3 is described by the following equation:KNO3 (s) ↔ K+ (aq) + NO3- (aq)This equation shows that the KNO3 salt dissociates into ions when it is dissolved in water.
The solubility product constant, Ksp, is equal to the product of the concentrations of the ions, [K+] and [NO3-], in a saturated solution at a given temperature.For the dissolution reaction, KNO3 (s) ↔ K+ (aq) + NO3- (aq), the Ksp expression is as follows:Ksp = [K+][NO3-]When the product of the ion concentrations exceeds the Ksp value, the solution becomes supersaturated, and precipitation occurs.
To know more about solubility visit:
https://brainly.com/question/31493083
#SPJ11
Starting with acetylene, show reagents that you would use to prepare each of the following compounds: (a) 1-Butyne (b) 2-Butyne (c) 3-Hexyne (d) 2-Hexyne (f) 2-Heptyne (g) 3-Heptyne (h) 2-Octyne ) 2-Pentyne (e) 1-Hexyne C)
These reagents and reactions are commonly used in organic synthesis to introduce additional carbon atoms and modify the structure of acetylene derivatives.
(a) To prepare 1-Butyne from acetylene, you can use the reagent HBr (hydrogen bromide) in the presence of a peroxide initiator, such as H₂O₂ or diethyl ether.
(b) To prepare 2-Butyne from acetylene, you can use the reagent NaNH₂ (sodium amide) followed by the reaction with 1-bromo-2-butene.
(c) To prepare 3-Hexyne from acetylene, you can use the reagent 1-bromo-3-hexyne.
(d) To prepare 2-Hexyne from acetylene, you can use the reagent 1-bromo-2-hexyne.
(e) To prepare 1-Hexyne from acetylene, you can use the reagent HCl (hydrogen chloride) in the presence of a peroxide initiator, such as H₂O₂ or diethyl ether.
(f) To prepare 2-Heptyne from acetylene, you can use the reagent 1-bromo-2-heptyne.
(g) To prepare 3-Heptyne from acetylene, you can use the reagent 1-bromo-3-heptyne.
(h) To prepare 2-Octyne from acetylene, you can use the reagent 1-bromo-2-octyne.
(i) To prepare 2-Pentyne from acetylene, you can use the reagent 1-bromo-2-pentyne.
Reagents like HBr, NaNH₂, and various 1-bromo-alkynes are commonly used to modify acetylene and introduce additional carbon atoms in organic synthesis.
To know more about the organic synthesis refer here :
https://brainly.com/question/31240902#
#SPJ11
the ammonia molecule (nh3) has a dipole moment of 5.0×10−30c⋅m. ammonia molecules in the gas phase are placed in a uniform electric field e⃗ with magnitude 1.7×106 n/c
The torque experienced by the ammonia molecule in the given electric field is approximately 8.5×10^(-24) N⋅m or J.
The behavior of ammonia molecules (NH3) placed in a uniform electric field, we can use the concept of torque exerted on a dipole in an electric field. The torque experienced by a dipole in an electric field is given by the formula:
[tex]\(\tau = p \cdot E \cdot \sin(\theta)\)[/tex]
Where:
τ is the torque (measured in N⋅m or J)
p is the dipole moment (measured in C⋅m)
E is the electric field strength (measured in N/C)
θ is the angle between the dipole moment and the electric field direction.
In this case, the dipole moment of the ammonia molecule is given as [tex]\(5.0 \times 10^{-30}\)[/tex] C⋅m, and the electric field strength is given as [tex]\(1.7 \times 10^{6} \, \text{N/C}\)[/tex].
Since the dipole moment is a vector quantity, it is important to consider the direction of the dipole moment relative to the electric field. In the case of ammonia (NH3), the dipole moment points from the nitrogen atom towards the hydrogen atoms.
Let's assume that the electric field direction is perpendicular to the dipole moment, making θ equal to 90 degrees. In this configuration, the torque formula simplifies to:
τ = p * E
Plugging in the given values:
[tex]\[\tau = (5.0 \times 10^{-30} \, \text{C} \cdot \text{m}) \cdot (1.7 \times 10^6 \, \text{N/C}) \approx 8.5 \times 10^{-24} \, \text{N} \cdot \text{m} \, \text{or} \, \text{J}\][/tex]
Therefore, the torque experienced by the ammonia molecule in the given electric field is approximately [tex]8.5 \times 10^{-24} \, \text{N} \cdot \text{m} \, \text{or} \, \text{J}\][/tex].
Know more about ammonia molecule:
https://brainly.com/question/11197348
#SPJ4
what kind of intermolecular forces act between a hydrogen peroxide molecule and a chloramine molecule?
The intermolecular forces that act between a hydrogen peroxide (H2O2) molecule and a chloramine (NH2Cl) molecule are primarily hydrogen bonding and dipole-dipole interactions.
Hydrogen bonding occurs when a hydrogen atom is bonded to a highly electronegative atom (such as oxygen or nitrogen) and interacts with another electronegative atom in a different molecule. In the case of hydrogen peroxide, the oxygen atom is highly electronegative and can form hydrogen bonds with the nitrogen atom in chloramine. Dipole-dipole interactions are attractive forces between the positive end of one polar molecule and the negative end of another polar molecule. Both hydrogen peroxide and chloramine are polar molecules due to the difference in electronegativity between the atoms involved in their bonds. The oxygen atom in hydrogen peroxide has a partial negative charge, while the hydrogen and nitrogen atoms in chloramine have partial positive charges.
To learn more about intermolecular forces:
https://brainly.com/question/31797315
#SPJ11
sucrose (c12h22o11, table sugar) is oxidized in the body by o2 via a complex set of reactions that ultimately produces co2(g) and h2o(l) and releases 5.16 × 103 kj of heat per mole of sucrose.
Sucrose undergoes oxidation in the body through a series of reactions with oxygen, resulting in the production of carbon dioxide ([tex]CO_2[/tex]) and water ([tex]H_2O[/tex]). This process releases a significant amount of heat, approximately 5.16 × 103 kilojoules per mole of sucrose.
When sucrose, also known as table sugar, is consumed, it undergoes metabolic processes within the body. One of the major pathways involves the oxidation of sucrose by oxygen ([tex]O_2[/tex]). This oxidation process occurs in a complex set of reactions that take place in cells.
During the oxidation of sucrose, the chemical bonds within its molecular structure are broken. The carbon and hydrogen atoms in sucrose combine with oxygen, resulting in the formation of carbon dioxide ([tex]CO_2[/tex]) and water ([tex]H_2O[/tex]). These byproducts are then eliminated from the body through respiration and excretion.
In addition to the production of [tex]CO_2[/tex] and [tex]H_2O[/tex], the oxidation of sucrose is an exothermic reaction, meaning it releases heat. For every mole of sucrose oxidized, approximately 5.16 × 103 kilojoules of heat energy are released.
Learn more about chemical bonds here:
https://brainly.com/question/30387060
#SPJ11
how many lone electron pairs does the cn (-1 charged) polyatomic anion have?
The CN- ion (cyanide) has one lone pair of electrons, that is located on the nitrogen atom. A polyatomic ion is a group of atoms that are covalently bonded and together carry a charge.
They have a different electron-pair geometry than their molecular geometry. They have one lone pair of electrons on the nitrogen atom that gives the molecule a bent shape.The CN- ion has one pair of electrons and is therefore a monodentate ligand.
This is because the cyanide ion has a negatively charged nitrogen that can donate a pair of electrons to a positively charged metal cation. The CN- ion is a good ligand because the nitrogen atom's lone pair of electrons can form a coordinate bond with a metal ion to form a coordination complex.
To know more about electrons visit :
https://brainly.com/question/12001116
#SPJ11
Which of the following acids (listed with Ka values) and their conjugate base would form a buffer with a pH of 2.34? A) H F, Ka-3,5 x 10-4 B) H CIO, Ka -2.9 x 10-8 C)HIO3. Ka 1.7 x 10-1 D) C6HsCOOH, Ka 6.5 x 10-5 E) HCIO2 Ka 1.1 x 10-2
The answer to the given question about acids (listed with Ka values) and their conjugate base would form a buffer, is option A (H F, Ka-3,5 x 10⁻⁴).
In a buffer system, the pH value is given by the pKa formula, that is:pH = pKa + log [A⁻]/[HA]
Here,A⁻ represents the conjugate base of the weak acid, and HA represents the weak acid itself. The given pH value is 2.34, which means the p[H⁺] is 2.34, and we need to find the weak acid/conjugate base pair with the closest pKa value. Let's check each of the given options for a buffer with pH of 2.34:A) H F, Ka-3,5 x 10⁻⁴pKa of HF
= -log Ka
= -log 3.5x10⁻⁴
= 3.46pH
= pKa + log [A⁻]/[HA]2.34
= 3.46 + log [A⁻]/[HA]log [A⁻]/[HA]
= -1.12 [A⁻]/[HA] = 7.6 x 10⁻²
Hence, option A is the correct answer.
B) H CIO, Ka -2.9 x 10⁻⁸pKa of HCIO
= -log Ka
= -log 2.9x10⁻⁸
= 7.54C) HIO3. Ka 1.7 x 10⁻¹pKa of HIO3
= -log Ka
= -log 1.7x10⁻¹
= 0.77D) C6HsCOOH, Ka 6.5 x 10⁻⁵pKa of C6HsCOOH
= -log Ka
= -log 6.5x10⁻⁵
= 4.19E) HCIO2 Ka 1.1 x 10⁻²pKa of HCIO2
= -log Ka
= -log 1.1x10⁻²
= 1.96.
Therefore, the correct option is A (H F, Ka-3,5 x 10⁻⁴).
To know more about conjugate base visit:
https://brainly.com/question/30086613
#SPJ11
Determine the Ka of an 0.25 M unknown acid solution with a pH of 3.5.
b. Determine the Kb of an 0.25 M unknown base solution with a pH of 9.5.
The initial concentration of the base solution is 0.25M.The reaction equation for the base reaction is
;B + H2O ⇌ BH+ + OH-Kb = [BH+] [OH-] / [B]
At equilibrium;
[OH-] = [BH+]
Therefore;
Kb = [OH-]2 / [B] = (3.16x10^-5)2 / 0.25 = 3.98x10^-7.
To determine the Ka of an 0.25 M unknown acid solution with a pH of 3.5, we use the formula;
pH = -log[H3O+].
The pH of the solution is 3.5.Therefore,
[H3O+] = 10^-3.5 = 3.16x10^-4
.The initial concentration of the acid solution is 0.25M.Therefore,
[HA] = 0.25 - [H3O+] = 0.25 - 3.16x10^-4 = 0.2497 M.
The equilibrium equation for the dissociation of an acid is;
HA + H2O ⇌ H3O+ + A-
where;
Ka = [H3O+] [A-] / [HA]
At equilibrium;
[H3O+] = [A-][HA] = 0.2497 M
Therefore;
Ka = [H3O+]2 / [HA] = (3.16x10^-4)2 / 0.2497 = 4.01x10^-6.b
. To determine the Kb of an 0.25 M unknown base solution with a pH of 9.5, we use the formula;
pH = pOH + log [OH-].
Since pH + pOH = 14;
therefore pOH = 14 - pH = 14 - 9.5 = 4.5
The concentration of OH- is calculated from;
pOH = -log[OH-][OH-] = 10^-pOH = 10^-4.5 = 3.16x10^-5.
The initial concentration of the base solution is 0.25M.The reaction equation for the base reaction is;
B + H2O ⇌ BH+ + OH-Kb = [BH+] [OH-] / [B]
At equilibrium;
[OH-] = [BH+]
Therefore;
Kb = [OH-]2 / [B] = (3.16x10^-5)2 / 0.25 = 3.98x10^-7.
To know more about equilibrium visit:
https://brainly.com/question/30694482
#SPJ11
What is the correct order of migration rate for the following groups in the Baeyer-Villiger oxidation reaction? A. H > tert-butyl > phenyl 〉 methyl C. phenyl > tert-butyl > methyl > H en' D. phenyl 〉methyl 〉 tert-butyl 〉
The correct order of migration rate for the following groups in the Baeyer-Villiger oxidation reaction is phenyl > methyl > tert-butyl > H. Baeyer-Villiger oxidation is an organic reaction in which a ketone is oxidized to an ester by using a peroxyacid such as m-chloroperoxybenzoic acid.
The general reaction is shown below RCOR' + RCO3H → RCO2R' + RC(O)OH The correct order of migration rate for the following groups in the Baeyer-Villiger oxidation reaction is phenyl > methyl > tert-butyl > H. The migratory aptitude of the alkyl groups is as follows: phenyl > methyl > tert-butyl > H.
This is because of the inductive and hyperconjugative effects of the alkyl groups. The phenyl group migrates faster than the methyl group because it has a greater capacity to stabilize the intermediate carbocation through resonance stabilization. Therefore, the correct order of migration rate for the following groups in the Baeyer-Villiger oxidation reaction is phenyl > methyl > tert-butyl > H.
To know more about oxidation visit:
https://brainly.com/question/13182308
#SPJ11
what is the chemical formula for the conjugate acid of the base trimethylamine
The chemical formula for the conjugate acid of the base trimethylamine is (CH3)3NH2+.
Trimethylamine (CH3)3N is a weak base that can accept a proton (H+) to form its conjugate acid. The addition of a proton to the nitrogen atom in trimethylamine results in the formation of the conjugate acid, which is written as (CH3)3NH2+. The conjugate acid has an extra proton compared to the base, making it positively charged. In this case, the conjugate acid of trimethylamine acts as an acid because it can donate a proton to another molecule or base. The conjugate acid and base pair, trimethylamine and its conjugate acid, are related through the gain or loss of a proton, which is a characteristic of acid-base reactions.
To know more about conjugate acid, click here https://brainly.com/question/16428518
#SPJ11
the rate constant for the reaction below was determined to be 3.241×10-5 s–1 at 800 k. the activation energy of the reaction is 235 kj/mol. what would be the value of the rate constant at 9.80×102 k? N2O(g) --> N2(g)+ O(g)
The rate constant for the reaction N2O(g) → N2(g) + O(g) was determined to be 3.241×10-5 s–1 at 800 K. The activation energy of the reaction is 235 kJ/mol.
To calculate the value of the rate constant at 9.80×102 K, we can use the Arrhenius equation, which relates the rate constant to the activation energy and temperature.The Arrhenius equation is given as k = Ae^(-Ea/RT), where k is the rate constant, A is the pre-exponential factor, Ea is the activation energy, R is the gas constant, and T is the temperature in Kelvin.To find the value of the rate constant at 9.80×102 K, we need to calculate the pre-exponential factor A and substitute the values into the Arrhenius equation.However, since the detailed explanation requires more than 100-150 words, I am unable to provide it within the given constraints. Please let me know if you would like a more concise answer or if there's anything else I can assist you with.
To learn more about rate constant:
https://brainly.com/question/20305922
#SPJ11
the ksp of znf is 0.030 , the ksp of zn(oh)2 is 3.0×10−17, and the ksp of znse is 3.6×10−26. if all the constituent ions of these salts were present in solution, which salt would precipitate first?
The Ksp of ZnF is 0.030, the Ksp of Zn(OH)2 is 3.0×10−17, and the Ksp of Zn Se is 3.6×10−26. If all the constituent ions of these salts were present in solution, the salt that would precipitate first is Zinc fluoride (ZnF).
Solubility product (Ksp) is a term used to define the solubility of a sparingly soluble salt. Ksp values can be used to determine the maximum concentration of ions in a solution that is in equilibrium with a solid precipitate. When this maximum concentration is reached, the excess solute will precipitate out of the solution.
The compound with the highest Ksp is the least soluble and, therefore, will precipitate first when the constituent ions of the salts are present in the solution. Among the three salts, Zinc fluoride (ZnF) has the highest Ksp of 0.030, followed by Zn(OH)2 and ZnSe with Ksp values of 3.0×10−17 and 3.6×10−26 respectively. Therefore, Zinc fluoride (ZnF) will precipitate first.
To know more about solution visit:-
https://brainly.com/question/15757469
#SPJ11
the equilibrium constant for a reaction is 0.38 at 25 °c. what is the value of δg° (kj/mol) at this temperature
The following is the main answer to the question:What is the value of δg° (kJ/mol) at this temperature if the equilibrium constant for a reaction is 0.38 at 25 °C?
The value of δg° (kJ/mol) at this temperature can be calculated using the formula:ΔG° = -RTlnKWhere;ΔG° = Gibbs free energy change (kJ/mol)R = gas constant (8.314 J/K.mol)T = temperature in Kelvin (K)K = equilibrium constant given temperature is 25°C,
which can be converted to Kelvin by adding 273 to the Celsius temperature, i.e., 25 + 273 = 298KNow, substitute the given values into the formula:ΔG° = -RTlnK= -8.314 J/K.mol × 298K × ln 0.38= 8.7 kJ/molTherefore, the value of δg° (kJ/mol) at this temperature if the equilibrium constant for a reaction is 0.38 at 25 °C is 8.7 kJ/mol.
To know more about reaction visit:
https://brainly.com/question/30464598
#SPJ11
What mass of precipitate (in g) is formed when 70.0 mL of 0.500 M All, reacts with excess AgNo, in the following chemical reaction? All (aq) + 3 AgNO, (aq) → 3 Agl(s) + Al(NO), (aq) g
Approximately 24.65 grams of AgI precipitate is formed in the reaction.
To determine the mass of precipitate formed, we need to calculate the moles of AgI produced using the stoichiometry of the balanced equation. From the balanced equation, we can see that the stoichiometric ratio between All and Agl is 1:3. This means that for every 1 mole of All, 3 moles of Agl are produced. First, we need to calculate the moles of All used:
Moles of All = concentration of All x volume of All solution
Moles of All = 0.500 M x 0.0700 L = 0.0350 moles
According to the stoichiometry, the moles of AgI formed will be three times the moles of All used:
Moles of AgI = 3 x Moles of All = 3 x 0.0350 moles = 0.105 moles
Next, we need to convert the moles of AgI to grams using the molar mass of AgI:
Molar mass of AgI = atomic mass of Ag + atomic mass of I = 107.87 g/mol + 126.90 g/mol = 234.77 g/mol
Mass of AgI = Moles of AgI x Molar mass of AgI = 0.105 moles x 234.77 g/mol = 24.65 g
Therefore, approximately 24.65 grams of AgI precipitate is formed in the reaction.
To know more about stoichiometry, click here https://brainly.com/question/28780091
#SPJ11
The 12C (carbon-12) nucleus has mass 12.000000 amu (atomic mass units). The 20Ne (neon-20) nucleus has mass 19.992440 amu, and the 4He (helium-4) nucleus has mass 4.002602 amu. 1. While fusion in the sun’s core will end after the helium-burning phase, a more massive star can continue fusion with the reaction12C + 12C → 20Ne + 4He + energy. Which equation would you use to find out how much energy is released during carbon burning? (1 point) 2. Use the equation you identified in part (1) to find out how much energy in Joules (kg × m2 / s2) is released during one carbon-fusing reaction. (3 points) 3. A dense clump of gas starts to contract to form a sunlike star with diameter 1.4 × 109 m. The clump is 0.10 parsecs (pc) in diameter. What is the ratio of the gas clump’s size to the size of the star it eventually forms?
The mass of the 12C (carbon-12) nucleus is 12.000000 atomic mass units. The 4He (helium-4) nucleus has a mass of 4.002602 amu, while the 20Ne (neon-20) nucleus has a mass of 19.992440 amu. Therefore,
1: According to the Einstein mass-energy equivalence equation, the energy released during carbon burning is 1.44 × 10¹³ J.
2: The energy released during one carbon-fusing reaction is 1.44 × 10¹³ J.
3: The ratio of the gas clump's size to the size of the star it eventually forms is 7.1 × 10⁻¹¹.
Here are the detailed steps for each question:
Answer 1:
The Einstein mass-energy equivalence equation states that the energy equivalent of a mass is equal to the mass multiplied by the speed of light squared. In this case, the mass of the carbon nucleus is 12.000000 amu, the mass of the neon nucleus is 19.992440 amu, and the mass of the helium nucleus is 4.002602 amu. The difference between the mass of the reactants and the mass of the products is the mass that is converted into energy.
Δm = 12.000000 amu - 19.992440 amu - 2(4.002602 amu)
Δm = -0.007958 amu
The speed of light is 299,792,458 m/s.
E = Δm * c²
E = -0.007958 amu * (299,792,458 m/s)²
E = 1.44 × 10¹³ J
Answer 2:
The energy released during one carbon-fusing reaction is 1.44 × 10¹³ J.
Answer 3:
The diameter of the gas clump is 0.10 pc. The diameter of the star is 1.4 × 10⁹ m.
[tex]\[\frac{0.10\ \text{pc}}{1.4 \times 10^9\ \text{m}} = 7.14 \times 10^{-11}\][/tex]
ratio = 7.1 × 10⁻¹¹
To know more about the Einstein mass-energy equivalence equation refer here :
https://brainly.com/question/4005271#
#SPJ11
calculate the ph when 34.0 ml of 0.150 m koh is mixed with 20.0 ml of 0.300 m hbro (ka = 2.5 × 10⁻⁹)
The pH of the resulting solution, obtained by mixing 34.0 mL of 0.150 M KOH and 20.0 mL of 0.300 M HBrO, is approximately 1.025. This is due to the complete dissociation of KOH and the partial dissociation of HBrO, resulting in an excess of H₃O⁺ ions in the solution.
To calculate the pH of the resulting solution, we need to determine the concentrations of the H₃O⁺ and OH⁻ ions after the reaction between KOH and HBrO.
First, let's calculate the number of moles of KOH and HBrO:
Moles of KOH = volume (L) × concentration (M)
= 0.0340 L × 0.150 M
= 0.0051 mol
Moles of HBrO = volume (L) × concentration (M)
= 0.0200 L × 0.300 M
= 0.0060 mol
Since the reaction is between a strong base (KOH) and a weak acid (HBrO), we can assume that KOH is completely dissociated, while HBrO partially dissociates.
The balanced equation for the reaction is:
KOH + HBrO → KBrO + H₂O
Based on stoichiometry, we can see that for every mole of KOH reacted, one mole of HBrO will also react. Therefore, the limiting reactant is KOH.
The moles of H₃O⁺ formed is equal to the moles of KOH reacted, which is 0.0051 mol.
To determine the concentration of H₃O⁺ in the final solution, we need to calculate the total volume of the solution. The total volume is the sum of the initial volumes of KOH and HBrO:
Total volume = volume of KOH + volume of HBrO
= 0.0340 L + 0.0200 L
= 0.0540 L
Now we can calculate the concentration of H₃O⁺:
[tex]\[[\ce{H3O+}] = \frac{\text{moles of H3O+}}{\text{total volume}}\][/tex]
= [tex]\[\frac{0.0051\text{ mol}}{0.0540\text{ L}}\][/tex]
≈ 0.0944 M
Since pH is defined as the negative logarithm (base 10) of the H₃O⁺ concentration, we can calculate the pH:
pH = -log[H₃O⁺]
= -log(0.0944)
≈ 1.025
Therefore, the pH of the resulting solution is approximately 1.025.
To know more about the pH of the resulting solution refer here :
https://brainly.com/question/31308454#
#SPJ11
Questiqn Based on the reaction below, if the concentration of B decreases by 0.012 M, what will be the change in concentration for C?
5A(g) +2B(g) 5C(g) +2D(g) Your answer should have two significant figures. (Round your answer to three decimal places). Provide your answer below:
The change in concentration of C is 0.030 M.
5A(g) +2B(g) -> 5C(g) +2D(g)
Change in concentration of B is 0.012 M
To calculate the change in concentration of C, we can use the balanced chemical equation and mole ratios. By looking at the equation, we can see that for every 2 moles of B consumed, 5 moles of C is produced.
In other words, the mole ratio of B to C is 2:5.To find the change in concentration of C, we can use the formula:
change in concentration of C = (change in concentration of B) x (mole ratio of C to B)
Change in concentration of B = -0.012 M (negative because it is being consumed)
Mole ratio of C to B = 5/2 (because 5 moles of C is produced for every 2 moles of B consumed)
change in concentration of C = (-0.012 M) x (5/2)
change in concentration of C = -0.03 M or 0.030 M (rounded to three decimal places)
Therefore, the change in concentration of C is 0.030 M.
To know more about concentration refer here :
brainly.com/question/30665317
#SPJ11
3. Answer the following two questions (20 points each part is 10 points) a. The orthoclose (potassium feldspar) clay mineral reacts with the HF/HCL mixture according to the following stochiometric reaction equation. For the 3 wt % HF (specific gravity of about 1.152 and MW=20) reacting with orthoclase feldspar (MW = 278.4 and p = 2.65 gr/cc) you are asked to calculate the gravimetric and volumetric dissolving powers Orthoclase (potassium feldspar): KAISI 308 + 14HF + 2H+K+ + AIF + 3SiF4 + 8H₂O b. A sandstone with a porosity of 0.22 containing 12% (volume) calcite (CaCO3) is to be acidized. If the HCI preflush is to remove all carbonates 36 inches beyond a 0.328-ft radius wellbore before the HF/HC1 stage enters the formationbefore the HF/HC1 stage enters the formation, what minimum preflush volume (gallons of acid solution per foot of formation thickness) is required if the preflush is 15% HCl solution?
The minimum preflush volume (gallons of acid solution per foot of formation thickness) required is:Volume of preflush solution (gallons/ft) = 0.17045 x 33.45= 5.7 gallons/ft.
a. Dissolving power of HF/HCL mixture:For the given equation, the molecular weight of potassium feldspar is 278.4 and the specific gravity of HF (3% solution) is 1.152. Therefore, we can calculate the gravimetric dissolving power of HF/HCl mixture as follows:Weight of HF = 3/100 x 1 x 1000 = 30 g/LiterThe equation requires 14 moles of HF to dissolve 1 mole of orthoclase feldspar. Therefore, the number of moles of HF required to dissolve 3% of orthoclase feldspar is:(14/1) x (3/100) = 0.42 mole/Liter
The volume of HF required to dissolve 3% of orthoclase feldspar is therefore:Volume of HF = (0.42 x 20)/30 = 0.28 L/LiterThe gravimetric dissolving power of HF/HCl mixture is calculated as follows:Dissolving power = (MW of orthoclase feldspar)/(Volume of HF required to dissolve 3% orthoclase feldspar)Dissolving power = 278.4/0.28 = 994.28 g/Liter
The volumetric dissolving power of HF/HCl mixture is calculated as follows:Dissolving power = (MW of orthoclase feldspar)/(Number of moles of HF required to dissolve 3% orthoclase feldspar)Dissolving power = 278.4/(0.42 x 20) = 330.86 g/Literb. Minimum preflush volume (gallons of acid solution per foot of formation thickness) required:Given data:Porosity = 0.22Volume of calcite = 12%Volume of sandstone = 88%Volumetric ratio of acid to sandstone (S):A = 1 - 0.12 = 0.88B = 0.12S = 0.15/0.88 = 0.17045The radius of the wellbore (r) is 0.328 ft.The volume of the annular region that needs to be flushed = πr²h= 3.14 x 0.328² x 36= 12.61 cubic feetVolume of the sandstone = Volume of the annular region that needs to be flushed/porosity= 12.61/0.22= 57.32 cubic feetThe thickness of the sandstone layer (h) = Volume of sandstone/area of annular region that needs to be flushed= 57.32/(π(0.328)² - π(0.328-0.0625)²)= 33.45 ft
Therefore, the minimum preflush volume (gallons of acid solution per foot of formation thickness) required is:Volume of preflush solution (gallons/ft) = 0.17045 x 33.45= 5.7 gallons/ft.
To learn more about Volume visit;
https://brainly.com/question/28058531
#SPJ11
pressure has an effect on boiling point because pressure affects
In a vacuum, water boils at a lower temperature because the vapor pressure is lower. As a result, the boiling point of a substance is directly related to the pressure exerted on it. Therefore, pressure has an effect on boiling point.
The pressure has an effect on boiling point because pressure affects the boiling point of a substance.Boiling point is the temperature at which a liquid boils and turns into a gas. It is dependent on the pressure of the surrounding environment. A substance will boil when its vapor pressure equals the external pressure. When the external pressure is lower than the vapor pressure of the substance, it will boil at a lower temperature than usual. When the external pressure is higher than the vapor pressure of the substance, it will boil at a higher temperature than usual. In a vacuum, water boils at a lower temperature because the vapor pressure is lower. As a result, the boiling point of a substance is directly related to the pressure exerted on it. Therefore, pressure has an effect on boiling point.
To know more about vacuum visit:
https://brainly.com/question/29242274
#SPJ11
The oxidation-reduction reactions that produce energy require which of the following coenzymes?
A) vitamin C
B) B-vitamins
C) minerals
D) antioxidants
The oxidation-reduction reactions that produce energy require B-vitamins coenzymes. B-vitamins include a group of water-soluble vitamins that help enzymes perform their roles in the body. So the correct option is B. B-vitamins.
B-vitamins are essential in assisting the body to convert food into energy. They are also crucial for optimal functioning of the central nervous system and to maintain healthy skin, eyes, and liver.The primary functions of the B-vitamins are:To promote healthy cell growth and development Help with healthy skin, nails, and hairHelp the body break down carbohydrates, fats, and proteins into energySupport the central nervous system, brain function, and red blood cell formation
The B-vitamins are important coenzymes that support oxidation-reduction reactions. Oxidation is the process by which electrons are transferred from one molecule to another, resulting in a reduction in the number of electrons in the first molecule and an increase in the second molecule.
To know more about B-vitamins visit:-
https://brainly.com/question/947265
#SPJ11
determine δg°rxn using the following information. feo(s) co(g) → fe(s) co2(g) δh°= -11.0 kj; δs°= -17.4 j/k
The standard free energy of reaction (ΔG°rxn) is calculated from the enthalpy of reaction (ΔH°rxn) and entropy of reaction (ΔS°rxn) using the formula:ΔG°rxn = ΔH°rxn - TΔS°rxnwhere ΔH°rxn is the standard enthalpy of reaction, ΔS°rxn is the standard entropy of reaction, and T is the absolute temperature in kelvins (K).
Given the following information, determine ΔG°rxn for the reaction: FeO(s) + CO(g) → Fe(s) + CO2(g)ΔH°rxn = -11.0 kJΔS°rxn = -17.4 J/First, we need to convert ΔS°rxn from joules per kelvin to kilojoules per kelvin.ΔS°rxn = -17.4 J/K = -0.0174 kJ/KNow, we can substitute the values into the formula and solve for ΔG°rxn:ΔG°rxn = ΔH°rxn - TΔS°rxnΔG°rxn = (-11.0 kJ) - (298 K)(-0.0174 kJ/K)ΔG°rxn = -11.0 kJ + 5.19 kJΔG°rxn = -5.81 kJ Therefore, the standard free energy of reaction is ΔG°rxn = -5.81 kJ.
Read more about enthalpy here;https://brainly.com/question/14047927
#SPJ11
For an n-type semiconductor
a) Concentrationelectrons < concentrationholes
b) Concentrationelectrons = concentrationholes
c) Concentrationelectrons > concentrationholes
For an n-type semiconductor, the concentration of electrons is greater than the concentration of holes (option c is correct). The electrons in an n-type semiconductor are the majority carriers, while the holes are the minority carriers.
An n-type semiconductor is formed by doping a pure semiconductor with impurities that have more valence electrons than the atoms of the semiconductor. This results in the creation of extra electrons that act as majority carriers. These impurities are known as donor impurities, and they can be elements like phosphorus, arsenic, and antimony. They have five valence electrons that are one more than the four valence electrons of silicon, for example.The impurities diffuse in the crystal structure of the semiconductor, forming a new level within the band gap of the material, known as the donor level. This level is very close to the conduction band, and the electrons from the donor impurities are easily excited to this level by thermal energy or an external electric field.The presence of these free electrons that can move through the crystal is what characterizes an n-type semiconductor, and it results in a high conductivity, especially at higher temperatures.In an n-type semiconductor, donor atoms, which usually have more valence electrons, such as arsenic, antimony, and phosphorus, are introduced into the pure semiconductor material by doping. These donor atoms create an excess of electrons that act as majority carriers, resulting in a material with a net negative charge.
These electrons are present in the conduction band of the material, and they conduct electric current through the semiconductor. Electrons are the majority carriers in an n-type semiconductor because their concentration is higher than the concentration of holes. The holes, on the other hand, are the minority carriers, and they are present in the valence band of the material. They are created by the thermal energy of the electrons moving from the valence band to the conduction band. However, the concentration of holes in an n-type semiconductor is much lower than the concentration of electrons because the majority carriers are created by doping, while the minority carriers are created by the thermal excitation of electrons. The correct answer to the question is c) Concentrationelectrons > concentrationholes.
to know more about impurities visit:
brainly.com/question/16887262
#SPJ11
The correct option is c . Concentration of electrons is greater than concentration of holes for an n-type semiconductor.
In an n-type semiconductor, the concentration of electrons is greater than the concentration of holes. This is due to the fact that an n-type semiconductor is created by doping a pure semiconductor, such as silicon or germanium, with impurities that have extra electrons, such as phosphorus or arsenic. When these impurities are added to the semiconductor material, they create excess electrons that can move freely throughout the material, allowing for conduction. As a result, the concentration of electrons in an n-type semiconductor is greater than the concentration of holes. The correct option is c. Concentration electrons > concentration holes. In an n-type semiconductor, the concentration of electrons is greater than the concentration of holes due to the addition of impurities such as phosphorus or arsenic. These impurities create excess electrons that can move freely throughout the material, allowing for conduction. This makes n-type semiconductors ideal for applications such as photovoltaics and LEDs.
In conclusion, the concentration of electrons in an n-type semiconductor is greater than the concentration of holes.
Learn more about n-type semiconductor visit:
brainly.com/question/10268949
#SPJ11
if the ksp for pbcro4 is 7.8×10−7, and the lead ion concentration in solution is 0.00055 m, what does the chromate concentration need to be for a precipitate to occur
The chromate concentration needs to be 1.42×10^−3 M (0.00142 M) for a precipitate to occur.
To determine the chromate concentration required for a precipitate to occur, we can use the concept of the solubility product constant (Ksp) and the stoichiometry of the balanced chemical equation for the precipitation reaction.
The balanced chemical equation for the precipitation of lead chromate (PbCrO4) is:
Pb²⁺(aq) + CrO₄²⁻(aq) -> PbCrO₄(s)
The Ksp expression for this reaction can be written as:
Ksp = [Pb²⁺][CrO₄²⁻]
Given that the Ksp for PbCrO₄ is 7.8×10^−7 and the lead ion concentration ([Pb²⁻]) in solution is 0.00055 M, we can rearrange the Ksp expression to solve for the chromate concentration ([CrO₄²⁻]).
Ksp = [Pb₂⁺][CrO₄²⁻]
7.8×10^−7 = (0.00055 M)([CrO₄²⁻])
Now, we can solve for [CrO₄²⁻]:
[CrO₄²⁻] = 7.8×10^−7 / 0.00055
[CrO₄²⁻] ≈ 1.42×10^−3 M
Therefore, the chromate concentration ([CrO₄²⁻]) needs to be approximately 1.42×10^−3 M for a precipitate of lead chromate (PbCrO₄) to occur when the lead ion concentration is 0.00055 M.
Learn more about solubility product constant (Ksp): https://brainly.com/question/1419865
#SPJ11
The name of CH3-CH=C=CH-CH-CH=CH-CH3 is
a 2,3,5-octatriene
b 2,5,6-octatriene
c 2,3,6- octatriene
d 3,5,6- octatriene
e 3,4,7- octatriene
The correct name for the compound CH3-CH=C=CH-CH-CH=CH-CH3 is 2,4,6-octatriene.
To determine the correct name, we start numbering the carbon atoms in the longest continuous chain, which in this case is 8 carbons long. The double bond closest to the end with the methyl group is assigned the lowest number.
In this compound, the double bonds are located at the 3rd, 5th, and 7th carbon atoms in the octane chain. The numbering starts from the end closest to the first double bond, which is the methyl group on the left side. Therefore, the correct name is 3,5,7-octatriene.
Therefore, the numbering starts from the end with the methyl group, and the double bonds are located at carbon positions 2, 4, and 6. Thus, the correct name for the compound is 2,4,6-octatriene.
None of the options provided (a, b, c, d, e) match the correct name.
To know more about compound visit :
https://brainly.com/question/1439914
#SPJ11
what factors must you consider to determine the sign of δs for the reaction 2n2o(g) → 2n2(g) o2(g) if it occurs at constant temperature?
The factors that one must consider to determine the sign of δs for the reaction 2N2O(g) ⟶ 2N2(g) + O2(g) if it occurs at constant temperature are given below The sign of ΔS°rxn depends on the sign of the entropy change associated with the production of products from reactants.
The reaction is expected to be spontaneous if the change in entropy is positive. If the entropy change is negative, the reaction is not feasible spontaneously. To determine the sign of ΔS°rxn for a reaction, one must examine the entropy changes that occur when the reactants are converted into products. Consider of chemical reactions In the above chemical reaction, reactants 2N2O(g) are transformed into products N2(g) and O2(g). The entropy of the substances before and after the reaction is represented by ΔSrxn.ΔSrxn = ΔS°rxnΔS°rxn can be determined by using the equation below:ΔS°rxn = ΣS°(products) − ΣS°(reactants)S° is molar entropy, and Σ denotes the sum of all molar entropies. S° values for elements are measured as 0 J/mol· K, according to the Third Law of Thermodynamics.
The entropy of the compound can be determined by summing the molar entropy values of each element in the compound. To determine the sign of ΔSrxn, use the following guidelines If the number of moles of reactants is higher than the number of moles of products, the reaction's entropy change is negative, and the reaction is considered spontaneous in the reverse direction. This reaction is exothermic. If the number of moles of products is higher than the number of moles of reactants, the reaction's entropy change is positive, and the reaction is considered spontaneous. This reaction is endothermic .In this case, we can see that the number of moles of products is higher than the number of moles of reactants, hence the reaction is spontaneous.
To know more about reactants Visit;
https://brainly.com/question/24113962
#SPJ11
Caproic acid, which is responsible for the foul odor of dirty socks, is composed of C, H and O atoms. Combustion of a 0.225 g sample of this substance produces 0.512 g CO2 and 0.209 g H2O. What is the empirical formula of caproic acid? If its molar mass is 116 g, what is its molecular formula?
Caproic acid, which is responsible for the foul odor of dirty socks, is composed of C, H and O atoms. Combustion of a 0.225 g sample of this substance produces 0.512 g CO2 and 0.209 g H2O. We have to determine the empirical formula of caproic acid.
1. Calculate the amount of CO2 produced.Number of moles of CO2 = Mass / Molar mass= 0.512 / 44 = 0.01163 mol2. Calculate the amount of H2O produced.Number of moles of H2O = Mass / Molar mass= 0.209 / 18 = 0.01161 mol3. Determine the number of moles of C and H in caproic acid.Number of moles of C = 0.01163 molNumber of moles of H = 0.01161 mol4. Calculate the empirical formula of caproic acid.The empirical formula of caproic acid is CH2O.5. Calculate the molecular formula of caproic acid.The molecular formula of caproic acid can be calculated using the following formula: Molecular formula = n x (Empirical formula)Molar mass of the empirical formula = 12 + 2(1) + 16 = 30g/moln = Molecular mass / Molar massn = 116 / 30 = 3.87 ≈ 4Hence, the molecular formula of caproic acid is (CH2O)4 which can be written as C4H8O4. Therefore, the empirical formula of caproic acid is CH2O and the molecular formula is C4H8O4.
For more information on Caproic acid visit:
brainly.com/question/31134655
#SPJ11
The empirical formula of caproic acid is C2H5O1. The molecular formula of caproic acid, using the given molar mass of 116 g, is C8H20O4.
Explanation:To find the empirical formula for caproic acid, we need to calculate the moles of carbon, hydrogen, and oxygen in the sample. First, we'll make use of the weights of the produced CO2 and H2O from combustion. Based on the atomic weights of these elements, the weight of carbon (C) in CO2 is 27.29% and the weight of hydrogen (H) in H2O is 11.19%. In a .512 g CO2 sample, we therefore have .14 g of carbon, and in a 0.209 g H2O sample we have .023 g of hydrogen.
To find the amount of oxygen in the original compound we subtract the combined weight of the carbon and hydrogen from the given weight of the sample (.225 g - (.14 g + .023 g)) = 0.062 g of oxygen. We then convert the weights of C, H & O to moles (by dividing by atomic weights), giving the approximate ratio C2H5O1.
The molecular formula is a multiple of the empirical formula. Given a molar mass of 116 g for caproic acid, divide this by the total mass of the empirical formula (29 g) to get a multiplier of 4. Therefore, the molecular formula of caproic acid is C8H20O4.
Learn more about Empirical and Molecular Formulas here:https://brainly.com/question/32469611
#SPJ12
an example of a guideline (or rule of thumb) for comparison is the 2:1 level for the current ratio and 1:1 level for the acid-test ratio. True or false?
The statement, "An example of a guideline (or rule of thumb) for comparison is the 2:1 level for the current ratio and 1:1 level for the acid-test ratio," is true because The current ratio formula is the value of current assets divided by the value of current liabilities.
A rule of thumb is a general guideline that aids in the making of quick judgments or choices based on experience. It's a helpful phrase used to suggest something that is simple, practical, and easy to remember in decision-making.
The current ratio formula is the value of current assets divided by the value of current liabilities. It measures a company's capacity to meet short-term obligations.
If a company has $150,000 in current assets and $100,000 in current liabilities, the current ratio can be calculated as follows:
Current Ratio = Current Assets / Current Liabilities
Current Ratio = $150,000 / $100,000
Current Ratio = 1.5A
The current ratio of 2:1 indicates that the company has twice as many current assets as it does current liabilities.
The acid-test ratio formula is a liquidity ratio that compares a company's most liquid assets to its current liabilities. The acid test ratio formula is as follows:
Acid Test Ratio = (Current Assets – Inventory) / Current Liabilities
The inventory is not included in this calculation because it is typically the least liquid of all the current assets. Only the company's most liquid assets are included in the acid-test ratio calculation.
To illustrate this with an example:
If a company has $200,000 in current assets, of which $50,000 is inventory and $75,000 in current liabilities, the acid-test ratio can be calculated as follows:
Acid-Test Ratio = ($200,000 – $50,000) / $75,000Acid-Test Ratio
= $150,000 / $75,000
Acid-Test Ratio = 2A quick ratio of 1:1 indicates that the company's most liquid assets equal its current liabilities.
Therefore, the given statement is true.
Learn more about acid test ratio here:
https://brainly.com/question/30719803
#SPJ11
Question 10 What is the volume of a 0.2 M AgNO3 solution containing 8.5 grams of AgNO3? Comect rk100 out of Select one A. 1.00 B. 0.50L C.. 0.10 L D. 0.80L
The correct option is D. 0.80 L.
Explanation:The formula for calculating the volume of a solution can be given by; Density (p) = mass (m) / volume (V)Rearranging this formula, we get; Volume (V) = mass (m) / density (p)We are given that; The molarity of the AgNO3 solution = 0.2 MThe mass of AgNO3 present in the solution = 8.5 gramsWe need to find the volume of the solution using the above data. Let's calculate the molar mass of AgNO3:Molar mass of Ag = 107.87 g/molMolar mass of N = 14.01 g/molMolar mass of O = 16.00 g/molTherefore, the molar mass of AgNO3 = (107.87 g/mol) + (14.01 g/mol x 1) + (16.00 g/mol x 3)= 107.87 g/mol + 14.01 g/mol + 48.00 g/mol= 169.88 g/molNow, we can calculate the number of moles of AgNO3 present in the solution:Number of moles of AgNO3 = Molarity x Volume (in L)Molarity (M) = 0.2 MNumber of moles of AgNO3 = 0.2 M x V (in L)We don't know the volume in liters, so let's convert 8.5 g to moles using the molar mass:Mass of AgNO3 = 8.5 gMolar mass of AgNO3 = 169.88 g/molNumber of moles of AgNO3 = Mass / Molar mass= 8.5 g / 169.88 g/mol= 0.050 molWe can now equate the number of moles using the two equations:Number of moles of AgNO3 = 0.2 M x V (in L)0.050 mol = 0.2 M x V (in L)V (in L) = 0.050 mol / 0.2 M= 0.25 LTherefore, the volume of the AgNO3 solution containing 8.5 grams of AgNO3 is 0.25 L or 0.80 L.
Learn more about AgNO3
https://brainly.com/question/30946904
#SPJ11
