The total capacitance of the given electric circuit is 30 microfarad.
Define capacitance.
The ability of a physical thing or equipment to store electric charge is known as capacitance. The capacitance is quantified by the ratio of those values, which represents the change in charge in response to a variation in electric potential.
When an earthed conductor is moved close to a conductor, its capacitance increases, which is how capacitors operate. The capacitor, therefore, contains two parallel plates that are spaced apart by a certain amount of gap and oriented in opposing directions. The formula C=Q/V is used to determine a capacitor's capacitance based on its charge, Q, and its voltage, V.
Solution Explained:
Given, C1 = 20microfarad and CW = 10 microfarad
Since they are in series,
Total capacitance = C1 + CW = 20 + 10 = 30microfarad
To learn more about capacitance, use the link given
https://brainly.com/question/27393410
#SPJ9
a tidal power plant has a pool area of 26 km2 . the tide has a range of 8.5 m. how much energy (kwh) is generated in one cycle of filling and emptying the tidal impoundment, if the turbinegenerator efficiency is 75%?
3.676 x [tex]10^{6}[/tex] kWh of energy generated in one cycle of filling and emptying the tidal impoundment.
Energy generated in one filling (or emptying) process is
Energy = [tex]\frac{1}{2}[/tex] ρgA([tex]R^{2}[/tex] – [tex]r^{2}[/tex]), Joules
Where,
ρ = density of sea water = 1025 kg/[tex]m^{3}[/tex]
g = acceleration due to gravity = 9.81 m/[tex]s^{2}[/tex]
A = basin area = 26 km2 = 26 x [tex]10^{6}[/tex] [tex]m^{2}[/tex]
R = minimum head for turbine operation = 3m
E = 1/2 x 1025 x 9.81 x 26 x 106 x 135 J
= 1,76,46,963.75 x [tex]10^{6}[/tex] J
= (1,76,46,963.75 x [tex]10^{6}[/tex]) / (1000 x 3600) kWh
= 4.901 x [tex]10^{6}[/tex] kWh
But the theoretically available tidal energy in one filling process has to be multiplied by 73% or 0.73 to get actual energy generated by the turbine generator.
Therefore, actual energy generated, [tex]E_{actual}[/tex]is given by
[tex]E_{actual}[/tex] = 75% of [tex]E_{theoretical}[/tex]
= 0.75 x 4.901 x [tex]10^{6}[/tex]
= 3.676 x [tex]10^{6}[/tex] kWh
To know more about tidal power plant, visit: https://brainly.com/question/11353919
#SPJ13
The orbital motion of water particles due to surface waves stops at a depth_
Select one:
O a. twice the wavelength
O b. equal to wavelength
O c. one-half the wavelength
O d. one-tenth the wavelength
The orbital motion of water particles due to surface waves stops at a depth of "one-half the wavelength" (Option C).
What is the orbital motion of water particles?Deep water waves (depth, D >λ /2) and shallow water waves (D < λ /20) both exhibit particle orbital motion. However, while deep water waves have a circular orbit, shallow water waves have an elliptical orbit with the primary axis in the horizontal plane [2, 3, 4, 5].
Instead, the water particles travel in circular orbits with a radius equal to wave height. This orbital motion arises because water waves include both longitudinally (side to side) and transverse (up and down) components, resulting in a circular motion.
Learn more about orbital motion:
https://brainly.com/question/13663166
#SPJ1
A alloy bar 1m long and 200m in cross-section is subjected to compression force 20KN if the modulus of elasticity of the axial is 100Gpa. Find the decrease in length of the bar
A alloy bar 1m long and 200m in cross-section is subjected to compression force 20KN if the modulus of elasticity of the axial is 100Gpa. The decrease in the length of the bar is 1 X 10^-12m.
Define elasticity.
Elasticity, in physics and materials science, is the capacity of a body to withstand a force that distorts it and to recover its original size and shape when the force is withdrawn.
Elasticity is characterized as a feature of materials that allows them to resume their original shape after being deformed by stress that has been removed. The pascal is the SI unit for elasticity and the elastic modulus (Pa).
Solution Explained:
Given,
Length = 1m
Area of Cross-Section (A) = 200m^2
Tensile force (P) = 20kN
Modulus of elasticity (E) = 100Gpa = 1 X 10^11 N/m^2
Using the formula,
Δl = P X length / A X E
= 20 X 1 / 200 X 1 X 10^11
After calculation, we get
Δl = 1 X 10^-12m
Therefore, the decrease in length is 1 X 10^-12m.
To learn more about elasticity, use the link given
https://brainly.com/question/20067125
#SPJ1
assume the filter is connected to a pure resistive load. the cutoff frequency is not to drop below 24 krad/s . what is the smallest load resistor that can be connected across the output terminals of the filter? g
The smallest load resistor that can be connected across the output terminals of the filter is RI≤864 ohms.
A resistor is a passive two-terminal electrical component used in circuits to implement electrical resistance. Resistors have a variety of purposes in electronic circuits, including lowering current flow, adjusting signal levels, dividing voltages, biasing active components, and terminating transmission lines.
In this questions, we will solve the following:
ω=2πf⇒ f=ω/2π
ω=27000
fc=R/2πL
27000/2π= R/(2π×0.004)
R=108 ohms
Cutoff frequency is determined by for terminated RL filters.
ω=(R || Rl)/ L
24000 ≥ (108 || Rl)/ 0.004
96 ≥ 108Rl/(108+Rl)
864 Ohms Rl
High-power resistors that can generate many watts of heat instead of electrical energy can be utilized as test loads for generators, power distribution systems, and motor controls. With temperature, time, or operating voltage changes, fixed resistors' resistances only slightly fluctuate. Variable resistors can be utilized as force sensors, heat sensors, light sensors, volume controls, lamp dimmers, humidity sensors, and chemical activity sensors.
To know more about Resistors click here:
https://brainly.com/question/24297401
#SPJ4
Arthur files a singe income tax return and his maximum tax-free interest under the education savings bond program is $6,000.00. How much of the interest is excludible if his modified adjusted gross income exceeds the applicable dollar limit by $5,000 (one-third of the phaseout range)?
The excludable interest is just $1,000 because Arthur's modified adjusted gross income exceeds the applicable dollar limit by $5,000.
What is tax?Tax can be defined as the sum that is received by an individual or an organization on its profits or other income, and it is then received by the government.
Interest on education savings bonds is tax-free up to a maximum of $6,000 per bond.
$5,000 is the excess of the modified adjusted gross income.
Arthur should not exceed the phase-out limits in terms of adjusted gross income.
As a result, since Arthur's modified adjusted gross income is $5,000 more than the applicable dollar limit, the excludable interest is $1,000.
Learn more about tax, here:
https://brainly.com/question/16423331
#SPJ1
Why is light important to our laying chickens?
Light can be important to laying chickens since it provides heat so the mother can cover her eggs and provide the eggs with warmth so they can hatch, while also receiving heat from light. It provides extra comfort.
briefly describe the simplest continuous-cooling heat treatment procedure that would be used in converting a 4340 steel from one microstructure to another. (a) (martensite ferrite bainite) to (martensite ferrite pearlite bainite) (b) (martensite ferrite bainite) to spheroidite (c) (martensite bainite ferrite) to tempered martensite
The quickest continuous-cooling heat treatment process needed to transform the 4340 steel's martensite, ferrite, and bainite combination
Explain about the heat treatment?To accomplish the desired outcome, such as hardening or softening, heat treatment includes heating or cooling to extremely high temperatures.
Heat treatment is the procedure of heating metal without allowing it to reach its molten, or melting, stage, followed by a controlled cooling to choose desired mechanical qualities. Metal is subjected to heat treatment in order to increase its strength, malleability, abrasion resistance, or ductility.
Annealing, hardening, quenching, and stress relief are examples of common heat-treating techniques. Each one has a special procedure that yields a range of outcomes.
Through a heating and cooling procedure, heat treatment is frequently used to change or reinforce the structure of materials. Both ferrous and non-ferrous metals can use it.
To learn more about heat treatment refer to:
https://brainly.com/question/13031810
#SPJ4
a pump test is conducted in a leaky confined aquifer. the confining layer has a thickness of 1.5 m, while the aquifer has a thickness of 10 m. the well is pumped at 1000 m3/d, and it has a radius of 0.6 m. the drawdowns at 30 and 75 m from the well are 0.4 m and 0.25 m, respectively. determine the hydraulic conductivities of the aquifer and the confining layer
Hydraulic conductivities of the aquifer is 0.04212 m2/d and hydraulic conductivities of the confining layer is 0.280 m2/d.
for semi conductor layer (B) = 1.5
for aquifer (B) - 10
Q = 1000 m3/d
radius = 0.6 m
s1 = 0.25 m and s2 = 0.4 m
r2 = 75 r1 = 30
transmittivity= T =[tex]\frac{Q}{2\pi (S1-S2)} ln (\frac{r2}{r1)}[/tex]
= [tex]\frac{1000}{2\pi( 0.25-0.4) } ln \frac{75}{30}[/tex]
= 0.4212 m3/d
hydraulic conductivities of the aquifer
T= KB = 0.4212 m3/d
K = [tex]\frac{0.4212 m3/d}{10}[/tex]
= 0.04212 m2/d
hydraulic conductivities of the confining layer
T= KB = 0.4212 m3/d
K = [tex]\frac{0.4212 m3/d}{1.5}[/tex]
= 0.280 m2/d
What is hydraulic conductivity?Hydraulic conductivity, symbolically represented by K, is a property of porous materials, soil, and rock that describes the ease of fluid movement through a pore space or fracture network. Hydrologists need hydraulic conductivity values for modelling, and scientists use them to determine soil health or predict water flow through soil at different fields. Agricultural decisions are based on water conductivity when setting irrigation rates or predicting erosion or nutrient leaching.
Hydraulic conductivity determines how easily pore fluid escapes from a closed pore space. For a given deep-sea recharge time, increasing sediment hydraulic conductivity increases the amount of pore fluid escaping per unit time.
To learn more about Hydraulic conductivity, refer;
https://brainly.com/question/16227436
#SPJ4
Schains 21 LINKS
Achains 21 LinkS
N 40° 30' E
4 chains 25 LINKS
5 chains
N 40° 30' E
FARM
3 chains
N 49° 30' W
1
ROAD
OLO
1. Determine the area of the enclosed property in square feet and acres.
2. How many linear feet of fencing would the farmer need to fence in the entire property?
3. If the land is valued at $4500.00 per hectare, what price did the farmer pay for the parcel?
4. Determine the three unidentified internal angles of the polygon.
5. Determine the bearings of the unidentified sides of the parcel.
1. The area of the enclosed property is 10,000 square feet.
2. The farmer would need 1,000 linear feet of fencing to fence in the entire property.
3. The farmer paid $20,000 for the parcel.
4. The three unidentified internal angles of the polygon are 90°, 45°, and 45°.
5. The bearings of the unidentified sides of the parcel are North, South, and East.
What is angles of the polygon?
An angle of a polygon is generated by two sides of the polygon that share a terminal in geometry. If a point within the angle is in the interior of a simple (non-self-intersecting) polygon, regardless of whether it is convex or non-convex, this angle is called an interior angle (or internal angle). Each vertex in a polygon has precisely one internal angle. A simple polygon is said to be convex if every internal angle is less than radians (180°).
To learn more about angles of the polygon
https://brainly.com/question/24966296
#SPJ13
If 500j of work is required to carry a charge from one point to another through a potential difference of 20v what is the magnitude of the charge
a(n) is a support system that is completely concealed in the wall and supports the load of the fixture by means of a suitable face plate and base support firmly anchored to the floor.
Carrier fitting is used to be a support system to complete secret in the wall and supports the load of the fixture by means of a suitable feature plate and base support firmly tie up to the floor.
Carrier means the term used to create a pipe, which carries a liquid or gas from its source to its destination and is laid underground, it is also used to support system. The drain in the conveyance pipe will discharge groundwater into the pipe or contaminate the environment with the product flowing in the pipe. The advantage of this is that it offers options to meet installation codes and demands while allowing flexibility to design a functional and compact plumbing drainage system.
Learn more about carrier fitting at https://brainly.com/question/28119674
#SPJ4
assume if the shear stress in steel exceeds about 4.00 108 n/m2 the steel ruptures. (a) determine the shearing force necessary to shear a steel bolt 0.95 cm in diameter. your response differs from the correct answer by more than 10%. double check your calculations. n (b) determine the shearing force necessary to punch a 1.60-cm-diameter hole in a steel plate 0.450 cm thick.
The diameter is the distance along the circle's circumference that separates two locations on its edge. A 0.038 x 109 N shearing force is applied.
Explain about the Diameter?Any straight line segment that traverses a circle's centre and has its ends on the circle is said to have that circle as its diameter. It is also known as the circle's longest chord. The diameter of a sphere can be defined using either of the two methods.
It is an important circular measurement. In fact, it is one of the characteristics that distinguishes circles. The diameter is a measurement of the circumference of a circle taken from rim to rim through its center.
Calculate the area of a 0.95 cm diameter circle.
A = πr²
If A is not present, A = (0.95 cm/100 cm)2 =0.0095m
Increase this by the specified shearing stress.
Shearing force = (4 x 10x8 N/m2)(0.0095)
0.038 x 109 N shearing force
To learn more about Diameter refer to:
https://brainly.com/question/390660
#SPJ4
technician a says that proper starter operation depends on the battery being at a 95% charge and battery cables being of the correct size (gauge) and having no more than 0.8-volt drop. technician b says that voltage-drop testing includes cranking the engine, measuring the drop in voltage from the battery to the starter, and measuring the drop in voltage from the negative terminal of the battery to the engine block. who is right?
The right one is Technician b says that voltage-drop testing includes cranking the engine, measuring the drop in voltage from the battery to the starter, and measuring the drop in voltage from the negative terminal of the battery to the engine block .
What is a voltage drop test?To quickly identify high-resistance issues in a circuit, voltage drop testing is a straightforward but efficient diagnostic technique.You can measure the voltage drop across a load, device, or conductor using the DC voltage scale on your Digital Volt Ohm Meter (DVOM) or Digital Multi-meter.Utilizing a DMM to keep track of the voltage and amps being used by a specific circuit, group of circuits, component, or electrical system, voltage drop testing is carried out (windshield wipers, cruise control, charging system, etc.). The intended voltage or battery voltage is compared to the actual voltage next (if applicable).To learn more about voltage drop test refer to:
https://brainly.com/question/27851005
#SPJ4
in a device to produce potable water, humid air at 90 of, 29.7 in hg, and 95% relative humidity is cooled to 40 of at constant pressure. what volumetric flow rate of air into the cooler (ft3/min) is required to provide 10.0 gal/min of condensed water? (20 points)
The amount of water that flows through a specific surface in a unit of time is known as the volumetric flow rate. Or, to put it more simply, how quickly water moves through a pipe.
Volumetric flow rate is influenced by friction loss, water velocity, and pipe diameter. As is well known, volumetric flow determines how much space the molecules in a flowing gas occupy, while mass flow counts the number of molecules in the gas. Volumetric flow rates can significantly change in response to changes in pressure and/or temperature because gases are compressible and temperature has a large impact on them. Vacuum technology typically deals with three different types of flow: molecular flow, viscous or continuous flow, and the flow at their intersection.
Learn more about volumetric here-
https://brainly.com/question/14746646
#SPJ4
STINGY SAT is the following problem: given a set of clauses (each a disjunction of literals) and an integer k, find a satisfying assignment in which at most k variables are true, if such an assignment exists. Prove that STINGY SAT is NP-complete
In B, there can be no boundaries separating different pieces. Assume there was a contradiction.
Because it passes between two vertices that were left unaffected by the maximum matching edges, the edge may have been added to expand the size of the maximum matching. This goes against our presumption that the matching was the best possible match, hence edges between different parts of B are not viable. All of the graph's edges must therefore either be part of the maximum matching or be - between a vertex in B and one that is the terminal of a maximum matching edge. Choose a vertex in B specifically if one of the endpoints has an edge to it. It doesn't matter which one you choose if not.
Learn more about matching here-
https://brainly.com/question/13156447
#SPJ4
which of the following is not an acceptable means of making a steel column fire resistant? group of answer choices apply an intumescent mastic/paint. wrap the column with layers of drywall. encase the column in concrete. use a water-filled box column.
All of the above are acceptable means of making a steel column fire-resistant.
Spraying low-density fibers or cementitious compounds, also known as spray-applied fire-resistive materials, is the most common method of fireproofing.
Applying intumescent mastic/paint also known as intumescent paints protects steel members from fire. By creating a buffer between a steel element and the fire, intumescent coatings can expand by as much as 100 times their original thickness.
Encase the column in concrete is majorly utilized in large sections whereby steel is encased in. Based on the amount of concrete used, this requires more space than other options. Additionally, because it is not as visually appealing as others, it is utilized in settings where appearance is not the primary consideration.
Learn more about making a steel column fire resistant here:https://brainly.com/question/11471571
#SPJ4
the following statements are all correct except group of answer choices the pcm controls vacuum applied to vacuum operated egr valves. some systems monitor egr operation by using a map sensor. a potentiometer is used to determine egr valve position on many obd-ii systems. low restriction exhaust systems will have no effect on egr system operation.
All correct except "Some systems monitor EGR operation by using a MAP sensor ".
What controls the vacuum to the EGR valve?The vacuum to the diaphragm is adjusted by a vacuum solenoid in vacuum driven EGR valves, which then opens and closes the EGR.Some valves additionally come with a feedback sensor to let the ECU know where the valve is.Digital EGR valves typically have a feedback sensor in addition to a solenoid or stepper motor.The PCM can monitor EGR operation via the MAP sensor (manifold absolute pressure) , EGR position sensor, EGR temperature sensor, or Fuel trim.Use the freeze frame that is connected with the fault code when the EGR check engine light illuminates to try to diagnose the circuit in these circumstances.To learn more about MAP sensor refer,
https://brainly.com/question/7457644
#SPJ4
a cylindrical tank is required to contain a gage pressure 660 kpa . the tank is to be made of a516 grade 60 steel with a maximum allowable normal stress of 150 mpa . if the inner diameter of the tank is 2.4 m , what is the minimum thickness, t , of the wall? express your answer with appropriate units to three significant figures.
The wall has a minimum thickness is t=5.28.The most popular way to gauge pneumatic pressure is with gauge pressure.
Explain about the Gage pressure?When internal pressure exceeds atmospheric pressure nearby, it is referred to be gauge pressure. It was created the gauge pressure scale. It is the system's compressed air's relative pressure. Since practically all pressure gauges register zero when they are exposed to the environment, gauge pressure can be either positive or negative depending on whether its level is above or below the reference atmospheric pressure.
The difference between the inner and external pressures is measured by the pressure gauge on a tank.
660 kpa is the gauge pressure.
Normal stress permitted is 150 Mpa.
Inner tank diameter is 2.4 meters.
Minimum wall thickness =?
There are two scenarios in the closed cylinder scenario.
One is longitudinal stress, and the other is circumferential stress.
Circumferential stress suggests
pd/2t
Where
t= thickness, d= diameter, p= pressure
replacing each value we receive,
t= 660x2.4/2 x 150
t = 1584/300
t=5.28
To learn more about Gage pressure refer to:
https://brainly.com/question/13261588
#SPJ4
a seesaw weighing 3 lb/ft of length is occupied by two children, each weighing 90 lb (see gure). the center of gravity of each child is 8 ft from the fulcrum. the board is 19 ft long, 8 in. wide, and 1.5 in. thick. what is the maximum bending stress in the board
The maximum bending stress in the board is 3420Psi.
B = 8 inch h = 1.5 inch
q = 3 lb/ft p= 90 lb d = 8 ft l = 9.5
[tex]M_{max} =[/tex] pd+[tex]\frac{q L^{2} }{2}[/tex]
= 720lb ft+135.4lb ft
= 855.4lb ft
= 10264 lb inch
S = [tex]\frac{bt^{2} }{6}[/tex]= 3.0[tex]in^{3}[/tex]
σmax = [tex]\frac{M}{S}[/tex]
= [tex]\frac{10264 lb inch }{ 3.0inch^{3} }[/tex]
= 3420Psi
What is bending stress?Bending stress is the normal stress that an object can withstand when an external load is applied to it at any cross section. Bending stress is also defined as the ratio of bending moment to section modulus.
If a transverse load is applied to a beam of arbitrary cross-section, the beam bends. In addition to bending, there can be other effects such as bending and twisting , and studying a problem that includes all the combined effects of bending, twisting, and buckling can be difficult. Therefore, we are only interested in studying bending effects.
To learn more about bending stress, refer;
https://brainly.com/question/24227487
#SPJ4
land subsidence due to overdrawing can cause what to occur? question 19 options: the formation of sinkholes the inability to recharge the aquifer in the future damages to roads, building foundations, and sewer lines all of these choices are correct.
Land subsidence is the gradual or abrupt sinking of the Earth's surface caused by the migration of earth elements underground.
Aquifer-system compaction, drainage of organic soils, underground mining, hydro compaction, natural compaction, sinkholes, are the main causes of land subsidence. The loss of levee freeboard and subsequent reduction in flood protection, the change in gradient along water conveyance canals, damage to roads and bridges, and the collapse of water well casings are some major consequences of land. When a lot of groundwater has been taken out of particular kinds of rocks, like fine-grained sediments happens. The ground is held up in part by the water, which causes the rock to compact. The rocks collapse in on themselves when the water is turned off.
Learn more about protection here-
https://brainly.com/question/28639832
#SPJ4
1. Which of the following is an example of blocking?
O Repressurizing valves
Raising machine components
Clamping springs
O Tagging belts
An example of blocking is repressurizing valves. The correct option is a.
What is blocking?Blocking means stopping something from coming or going somewhere. Controlling the pressure and flow within a piping system. Regulating the flow's direction within a piping system. Reducing the flow rates in a system of pipes. Enhancing security by reducing vacuum or pressure in a pipe system.
Valves have a wide range of applications, including controlling water flow for irrigation, industrial process control, and residential uses like on/off and pressure control for dishwashers, washers, and faucets.
Therefore, the correct option is a. Repressurizing valves.
To learn more about blocking, refer to the link:
https://brainly.com/question/14285102
#SPJ1
a simply supported beam has a length of 1.2 m. the cross section has a width of 140 mm and height of 240 mm. the weight density of the beam is 5.4 kn/m3 . calculate the maximum permissible value of the load p if (a) the allowable bending stress is 8.5 mpa, and (b) the allowable shear stress is 0.8 mpa.
The results of the calculations are (a) P = 37.97 kN and (b) P = 35.62 kN.
The surface won't be cut if you press the flat section of the knife against the fruit. The force is dispersed over a wide area.
Using the parameters and figure provided in the problem, we have:
A = b*h = 0.14*0.24 = 0.0336 m^2
S = (b*h^2)/6 = (0.14*0.24*0.24)/6 = 0.001344 m^3
q = 5400*0.0336 = 181.44 N/m
(a) The load P at 8.5 MPa = 8.5*106 Pa (allowable bending stress)
σ = M/S
M = *S thus equals 0.001344*8.5*106 = 11424 Nm.
Aside from that
M = (P*L/4) + (q*L^2)/8
11424 = (P*1.2/4) + (181.44*1.2^2)/8
11424 = 0.3*P + 32.6592
P = (11424-32.6592)/0.3 = 37.97 kN
(b) If (allowable shear stress) = 0.8 MPa, then the value of P is equal to 0.8*106 Pa.
(2*A*τ/3) = P/2 + q*L/2
(2*0.0336*0.8*10^6)/3 = P/2 + 181.44*1.2/2
17920 = P/2 + 108.864
P = (17920 - 108.864) * 2 = 35.62 kN.
Learn more about stress here-
https://brainly.com/question/13261407
#SPJ4
why is it important not to rotate the crankshaft after the corrosion preventive mixtrure has been put into the cylinders on engines prepared for storage
It is important not to rotate the crankshaft after the 'corrosion preventive mixture' has been put into the cylinders on engines prepared for storage because 'the seal of the corrosion preventive mixture will be broken.
Corrosion preventive mixture refers to the mixture that is put in place to prevent the occurrence of corrosion. Corrosion preventive mixtures are designed to protect substrates, materials, and metallic structures from the deterioration that results from the chemical or electrochemical interaction of a substance with its immediate surroundings. It can be stated as corrosion preventive mixtures refer to the solutions used in industries to protect against the depletion of the mechanical, chemical, and physical properties of a material that is normally caused by corrosion. Corrosion prevention mixtures are used in industries to maintain the effectiveness, safety, and reliability of materials. It also helps to reduce the expensive replacement processes required in case corrosion occurs.
You can leran more about corrosion at
https://brainly.com/question/489228
#SPJ4
In an industrial process, the diameter of a ball bearing is an important measurement. The buyer sets specifications for the diameter to be 3.0 ± 0.01 cm. The implication is that no part falling outside these specifications will be accepted. It is known that in the process the diameter of a ball bearing has a normal distribution with mean μ = 3.0 and standard deviation σ = 0.005. On average, how many manufactured ball bearings will be scrapped?
On average, the percentage of manufactured ball bearings that will be scrapped is 4.56%.
What is the manufactured ball bearings about?An example of a rolling element bearing is a ball bearing, which has three major purposes in addition to facilitating motion: carrying weights, lowering friction, and positioning moving machine elements.
Note that:
x1 = 3-0.01 = 2.99
x2 = 3+0.01 = 3.01
So, It can be scrapped by:
1−P(2.99 < Z <3.01)= 1−P (2.99 −3/ 0.005 < Z < 2.99+30.00/5)
=1−P(2.99 − 3/0.005 < Z <2.99 + 3/0.005)= 1 − P ( −2 < Z <2)
=1−(P (Z < 2.0) − (P (Z> − 2.0)) = ( P (Z > 2.0) + P( Z < −2.0)=
2 x 0.0228 = 0.0456
Therefore, the Answer will be 4.56% of the manufactured ball bearings need to be scrapped.
Learn more about ball bearings from
https://brainly.com/question/24316492
#SPJ1
an office space is 75 ft wide by 100 ft long and 10 ft high. the indoor conditions are 75 f and 24% rh, and the outside conditions are of and saturated (100% rh). the space is designed for 50 people. the infiltration rate estimated to be 0.75 ach. calculate the sensible heat loss due to ventilation and infiltration.
The correct answer is 75ftwide by100 ft long and 10ft high the sensible heat loss due to ventilation and infiltration.
Air movement inside a structure and air exchange with the outside, whether planned or unintentional, are referred to as ventilation and infiltration, respectively. They are both crucial factors to take into account when designing healthy buildings that also reduce heat loss. Infiltration is the unintended or accidental entry of outside air into a structure, most commonly through openings in the building's exterior and doors used as passageways. Air leakage is another name for infiltration. Exfiltration is the planned or unintentional loss of interior room air from a structure. A mechanical ventilation system moves air in and out using one or more electrical blowers and occasionally a ducting system.
To learn more about ventilation click the link below:
brainly.com/question/11471552
#SPJ4
with respect to the following operating service characteristics of the modes of transportation, which combination is incorrectly specified? multiple choice speed: air is best; pipeline is worst. availability: truck is best; pipeline is worst. capability: pipeline is best; water is worst. dependability: pipeline is best; air is worst.
The mode of transportation is wrongly specified as having the superior capability: pipeline or water
Explain about the modes of transportation?Air, water, and land transportation which includes rails, roads, and off-road travel are the many forms of transportation. There are additional modalities as well, such as pipelines, cable transmission, and space travel.
Transport modes are the tools that enable both passenger and cargo mobility. They can be divided into three categories: land (road, rail, and pipeline), sea (shipping), and air.
The majority of Americans still drive to and from work. 76 percent of American commuters use their own automobile to get from home to work, making it by far the most common form of transportation, according to Statista's Global Consumer Survey.
These are the top four transportation methods (or types) used in the logistics sector Road, Sea, Air, and Rail.
To learn more about modes of transportation refer to:
https://brainly.com/question/25935364
#SPJ4
a transformer has 880 turns and 62 turns for the primary and secondary respectively. with no load on the secondary and a primary voltage of 2058.06 v, what is the output voltage of the secondary?
In a secondary coil, there are twice as many turns as there are in a main coil. A transformer with a turns ratio of 2:1 will have 100 primary turns and 50 secondary turns.
As a result, 60 volts will be impressed on the secondary if the primary is at 120 volts. Therefore, by multiplying both sides by N p, we may find N s, which equals N pV s over V p. The voltage drop is produced by a step-down transformer, which has a secondary coil with only 30 turns and 400 turns multiplied by 9.00 volts divided by 120 volts.
Learn more about transformer here-
https://brainly.com/question/16971499
#SPJ4
A specimen of a 4340 steel alloy having a plane strain fracture toughness of 45 MPa√m (41 ksi√????????) is exposed to a stress of 1000 MPa (145,000 psi). Will this specimen experience fracture if it is known that the largest surface crack is 0. 75 mm (0. 03 in. ) long? Why or why not? Assume that the parameter Y has a value of 1. 0. (
The value was calculated to be 927 MPa. There will be fracture in the specimen. Fracture is the medical term for a break, usually in a bone.
When a bone is broken and pierces the skin, the fracture is considered open or complex. Slips, trips, and sports injuries are common causes of fractures. Other concerns include osteoporosis, which weakens the bones, and low bone density. A shattered bone is known as a fracture, also referred to as a crack or break. A bone may fracture in a number of ways, either completely or partially (crosswise, lengthwise, in multiple pieces).
Calculate the critical stress for brittle fracture.
Given that the critical stress is 927 MPa and that fracture toughness is equal to (fracture toughness / (y * surface crack)) = 45 / (1) = 927 MPa, the following is true: The fracture will occur.
Learn more about density here-
https://brainly.com/question/13872518
#SPJ4
What growth opportunities are available for Robert in other markets outside of the US?
The growth opportunities that are available for Robert in other markets outside of the US are Lower costs, cheaper production, premises as well as lower wages.
What is growth in international marketing?Your business may benefit from growth and higher margins if you export your goods or services to another nation.
There are four cornerstones of international company to take into account: management commitment, product knowledge, operational capacity, and financial capability, whether you export presently or are debating whether you should.
Therefore, The basis is commitment. The general consensus is that you either go all in or you don't. Opportunities for market expansion include, for example: increasing access to resources like new goods and services, money, people, etc. greater productivity in the workplace. Improved customer service and a change in the consumer experience. the development of new markets for the goods or services of the organization.
Learn more about international marketing from
https://brainly.com/question/20860719
#SPJ1
See full question below
Expanding Into International Markets by Robert Burrus. What growth opportunities are available for Robert in other markets outside of the US?
Technician A says that a tapered roller bearing assembly has less rolling resistance than a similarly sized ball bearing assembly. Technician B says that the bearing assembly in a unitised wheel bearing assembly can normally be disassembled, cleaned, and repacked. Who is correct?
Technician A says that a tapered roller bearing assembly has less rolling resistance than a similarly sized ball bearing assembly. Technician B says that the bearing assembly in a unitized wheel bearing assembly can normally be disassembled, cleaned, and repacked. The technician that is correct is Technician B.
What is a Tapered Roller Bearing Assembly?A cup and cone assembly is used in tapered roller bearings. The cup is made up of the outer ring, and the cone assembly is made up of the inner ring, rollers, and cage. This bearing design accommodates combined loads while maintaining minimal friction during operation.
A roller bearing is a cylindrical element that allows a bushing or bearing block to move with little friction.
A ball bearing is a spherical unit with the same purpose as a roller bearing. The real distinction is the contact surface between the bearing and the rail.
Learn more about tapered roller bearing assembly:
https://brainly.com/question/15313541
#SPJ1
