if the mercury in a barometer rises 13.2 centimeters due to a change in ambient pressure, what is the corresponding change in pressure in atm?

It takes 34.1 minutes to evaporate 3 kg of water at 100°C using the element.

The heating element's current draw is I=15 A.

V=220 V is the supply voltage.

The water's mass, m=3 kg

The water's temperature is T=100 °C.

Water's latent heat of vaporization, L v, is 2.25 106 J/kg.

The heating element's power is provided by,

P = IV =Wt

where W is the amount of labor the heating element does to evaporate the water, and t is the amount of time it takes.

Regarding arranging,

t=W/IV

The work carried out on the water and by the heater is identical. Additionally, the effort expended to evaporate the specified amount of water is equivalent to that effort.

i.e.,

W = mL/IV

Therefore,

t = mL/IV

The time will be in seconds because all the values are in SI units.

Thus, the amount of time in minutes it takes for the water to evaporate is given by,

t = mL/IV x 60

Using the known values as a substitute

t = (3 x 2.25 x 10⁶) / (15 x 220 x 60)

Therefore, it takes 34.1 minutes to evaporate the specified volume of water.

Learn more about heat at https://brainly.com/question/24172485

#SPJ4

Adding or removing thermal energy can cause a substance to change from one state to another, and chemical reactions can cause thermal energy to increase or decrease.

Thermal energy is internal energy that exists in a system due to its temperature.

Thermal energy is energy related to the random motion of atoms and molecules, named thermal because this energy can be measured through temperature (thermal).

The atoms will collide randomly and the temperature will increase. This is the benchmark for thermal energy. The volume and pressure on the atoms also have an effect because volume and pressure are directly proportional to temperature in accordance with the formula for the ideal gas equation PV = nRT.

Learn more about thermal energy at https://brainly.com/question/18989562.

#SPJ4

Answer:

- The molecular formula of the compound is N1O1

- The empirical formula of the compound is therefore N1O1.01.

- Molar mass = 60.02 g/mol.

- "n" = 0.97/1 (rounded up)

Explanation:

To determine how many moles of oxygen and nitrogen, we first need to calculate the number of moles of each element in the liquid using the percentage composition and the molar mass.

Nitrogen: 46.68 g of Nitrogen / (28.02 g/mol) = 1.66 moles of Nitrogen

Oxygen: 53.32 g of Oxygen / (32.00 g/mol) = 1.67 moles of Oxygen

To determine the compound empirical formula, we need to divide the number of moles of each element by the smallest number of moles among them. In this case, the smallest number of moles is 1.66 moles of Nitrogen. So, the empirical formula would be N:O = 1.66 : 1.67 = 1 : 1.01. The empirical formula of the compound is therefore N1O1.01.

The molar mass of the empirical formula is calculated by adding up the atomic masses of all the atoms in the formula: 28.02 g/mol (for nitrogen) + 32.00 g/mol (for oxygen) = 60.02 g/mol.

The "n" value in the molecular formula is a whole number that represents the multiple of the empirical formula. It can be calculated by dividing the molar mass of the compound (58.12 g/mol) by the molar mass of the empirical formula (60.02 g/mol): 58.12 g/mol / 60.02 g/mol = 0.97. Round up the result to the nearest whole number, which is 1.

The molecular formula of the compound is the empirical formula multiplied by the "n" value: N1O1.01 * 1 = N1O1.

So, the molecular formula of the compound is N1O1, meaning it contains one nitrogen atom and one oxygen atom.

The volume of the lagoon for complete mixing must be larger than 86580 m³ or 8.658 ×10⁷ L.

A lagoon is a small body of water that is shielded from a larger one (often the ocean) by coral reefs, islands, or sandbars. Many more names for lagoons include estuaries, sounds, bays, and even lakes.

Non-conservative Pollutants are substances that are thought to be partially or completely destroyed, biodegraded, chemically altered, or volatilized within the POTW. Cadmium and lead are examples of heavy metal pollution.

Effluent is treated sewage from a sewage treatment plant or septic tank. Additionally, it is known as "trade effluent."

The untreated or contaminated water that enters the WWTP ready for processing is referred to as "influence flow." Effluent flow, on the other hand, occurs when wastewater leaves a plant and enters a body of water.

To learn about effluent

https://brainly.com/question/29439696

#SPJ4

A fume hood is a safety device designed to protect laboratory workers from hazardous D. fumes and vapors.

A fume hood is a safety device used in laboratory settings to protect the user from hazardous fumes and vapors generated during chemical reactions.

Fume hoods are designed to enclose and contain fumes and vapors generated during laboratory procedures. They use a combination of air flow and exhaust systems to capture and remove potentially dangerous substances from the laboratory environment, thereby protecting the user.

The types of hazards that a fume hood can help protect against include fumes, vapors, and gases, which may be harmful if inhaled or come into contact with the skin. Some fume hoods are also equipped with features to protect against fire and explosions. However, fume hoods do not typically protect against hazards such as UV light or radioactivity.

To learn more about Fumes visit here:

https://brainly.com/question/14410789

#SPJ11

Question 1, acid mine drainage (AMD) is caused by coal mining because mining can expose minerals that are sulfide-rich.

Question 2, common characteristics of acidic solutions include a sour taste, the ability to react with metals to produce hydrogen gas, and the ability to change the color of pH indicators. Common characteristics of basic solutions include a bitter taste, a slippery feel, and the ability to change the color of pH indicators.

Question 3, solutions with low pHs contain a high concentration of hydrogen ions, which can cause the formation of many small, invisible ions or molecules in solution. This makes it difficult to see any visible solids in solution.

Question 4, pH is commonly described as having a range of 0-14 because it is a logarithmic scale.

The explanation for each answer are as follows:

Learn more about alkaline here: brainly.com/question/27006881

#SPJ4

Biodiversity is the number & variety of species that are present in an area.

The definition of diversity of flora and fauna (biodiversity) is the variability among living things from all sources, including the interactions of terrestrial, coastal and marine ecosystems and other aquatic ecosystems and the ecological complexes in which living things live as a part. This includes species diversity, between species and ecosystems.

In another sense, diversity of flora and fauna is the availability of diversity of biological resources in the form of types and richness of germplasm (genetic diversity within species), diversity between species and diversity of ecosystems.

Biodiversity is all life on this earth including plants, animals, fungi and microorganisms as well as the various genetic materials they contain and the diversity of the ecological systems in which they live. This includes the relative abundance and genetic diversity of organisms from all habitats, whether on land, sea or other aquatic systems.

Learn more about biodiversity at

https://brainly.com/question/26110061

#SPJ1

The reaction takes place when the 1.6 mol Al is added to 2.7 mol O₂. The one present at the end of the reaction is 1.5 mole of O₂.

The balance reaction is as :

4Al  +  3O₂   ---->   2Al₂O₃

The moles of Al = 1.6 mol

The moles of O₂ = 2.7 mol

4 mole of Al react with 3 mole of O₂

Moles of Al = (4/3 ) 2.7

                  = 3.6 mol

Therefore, the Al is the limiting reagent.

The moles of O₂ = (3/4) 1.6

                            = 1.2 mol

The moles in excess = 2.7 - 1.2

The moles in excess = 1.5 mole of O₂ .

To learn more about moles here

https://brainly.com/question/26416088

#SPJ4

Answer:

These traps hold oil and gas because the earth has been bent and deformed in some way.  The trap may be a simple dome (or big bump), just a “crease” in the rocks, or it may be a more complex fault

 All pore spaces in the rocks are filled with fluid, either water, gas, or oil.  Gas, being the lightest, moves to the top.  Oil locates right beneath the gas, and water stays lower.

Once the oil and gas reach an impenetrable layer, a layer that is very dense or non-permeable, the movement stops.  The impenetrable layer is called a “cap rock.”

There are 6 expected signals in 13C NMR spectrum.

The resonances are caused due to 13C nuclei that are split by neighboring  H atoms. These splitting would make the appearance complicate of the spectra making them harder to interpret. Therefore, in a "normal" 13C spectra, these couplings are thereby "removed" by applying a continuous second radio frequency signal of a broad frequency range that excites all the H nuclei and H nuclei cancels out the coupling patterns due to the interaction of the H with the 13C. Which implies that each C is seen as a single line.

During off-resonance decoupling, the one bond C-H couplings are retained so the signal for a particular C is given by the number of attached H in accordance with n+1 rule.

Learn more about NMR spectrum from the link given below.

https://brainly.com/question/14486064

#SPJ4

The rate at which water molecules gain kinetic energy and escape the liquid phase into a gaseous phase increases as the temperature increases.

In detail, when water is heated, the molecules absorb the energy and start to vibrate more and more vigorously. If the water is heated to its boiling point, 100°C, the molecules have gained enough kinetic energy to escape the liquid phase and transition into a gaseous phase (steam).

This process of a substance changing from a liquid to a gas is called boiling or evaporation. As the temperature of water continues to increase, the rate at which molecules escape the liquid phase also increases, leading to an increase in the rate of boiling or evaporation.

To learn more about water, visit:

https://brainly.com/question/28465561#

#SPJ11

Lazzaro Spallanzani concluded that boiling the broth killed any potential living organisms and that air was not necessary for life, based on the results of his experiments boiling broths and sealing the flasks.

Lazzaro Spallanzani was an Italian scientist who lived in the late 18th century. In his experiments, he boiled broths for extended periods of time and then sealed the flasks by melting their glass necks closed. By doing this, he aimed to determine the conditions necessary for life to exist.

The results of his experiments showed that boiling the broth killed any potential living organisms and that the broth did not contain any new microorganisms after being sealed and boiled. This led Spallanzani to conclude that air was not necessary for life and that life could not arise spontaneously from non-living matter.

These findings were crucial in disproving the then-prevailing idea of spontaneous generation, which was the belief that life could arise spontaneously from non-living matter. Spallanzani's experiments paved the way for further advancements in microbiology and the understanding of the origins of life.

Learn more about Spallanzani's experiments here:

https://brainly.com/question/17385986

#SPJ4

Cyclohexane and sulfuric acid do not react because cyclohexane is a non-polar, hydrophobic molecule and does not form hydrogen bonds with polar, hydrophilic molecules like sulfuric acid.

In addition, cyclohexane is a saturated hydrocarbon, which means it contains only single bonds between the carbon atoms. Sulfuric acid is a strong protonic acid that readily reacts with compounds that contain reactive functional groups, such as alcohols and carboxylic acids. However, it does not react with saturated hydrocarbons like cyclohexane, which lack these reactive functional groups.

It is also worth noting that cyclohexane is a relatively unreactive molecule in general, due to its stability and the absence of any reactive functional groups. This makes it useful as a solvent for many organic reactions, as it does not react with other compounds in the reaction mixture.

To know more about Cyclohexane click here:

https://brainly.com/question/17019157#

#SPJ11

A neutral hydrogen atom's time-averaged scalar potential is given by Φ(r) = -q / 4πε0r where q is the proton charge and 0 is the permittivity of the vacuum. We may use the relation.

to calculate the charge density associated with this potential. (r) = (r') / 404 |r - r'| dV' where (r) is the charge density and the integral represents the charge density across all space. We discover by equating the two formulas for (r) and solving for (r) that ρ(r) = qδ(r) (r) where (r) is the Dirac delta function representing a point charge at the origin. In other words, the charge density associated with a neutral hydrogen atom's time-averaged scalar potential is a point charge placed at the proton's location.  neutral hydrogen atom's time-averaged scalar potential is given by Φ(r) = -q / 4πε0r where q is the proton charge and 0 is the permittivity of the vacuum. We may use the relation.

learn more about proton  here:

https://brainly.com/question/1252435

#SPJ4

Ion's equilibrium potential is defined as the state in which the tendency of ions (electrically charged particles) to flow across a cell membrane from regions of high concentration is exactly balanced by the opposing potential difference (electric charge) present across the membrane.

In other words it is also defined as the electrical potential difference across the cell membrane that exactly balances the concentration gradient for an ion.

The other widely used name of equilibrium potential is  called the Nernst potential, after Walther Nernst, a German physical chemist who, in the late 19th century, developed equations for calculating the electrical potential at which there is no longer a net flux of a specific ion across a membrane.

Learn more about ion's equilibrium potential from the link given below.

https://brainly.com/question/12971132

#SPJ4

The classification of examples into potential energy and kinetic energy are given below.

1. standing at the top of a

slide- potential energy.

2. wind up for the pitch- potential energy.

3. juice in an orange- potential energy.

4. move downhill in a roller

coaster- kinetic energy.

5. roll down a grassy hill- Kinetic energy.

6. an unburned lump of

coal- potential energy.

7. throw a curve ball- kinetic energy.

8. a battery- potential energy.

9. frog leaping into the

water- kinetic energy.

10. book falls from a high

shelf- potential energy.

11. a parked car- potential energy.

12. frog sitting on a lily pad- potential energy energy.

For more information on kinetic and potential energy kindly visit to

https://brainly.com/question/28990888

#SPJ1

To calculate the percent methyl yield, we need to divide the amount of product obtained by the amount of theoretical yield, then multiply by 100.

Theoretical yield = 102 mg

Actual yield = 87 mg

Percent yield = (Actual yield / Theoretical yield) * 100

Percent yield = (87 / 102) * 100 = 85.3

So the Methyl is : 85.3

Methyl is a hydrophobic alkyl functional group. Its name is derived from methane, a simple alkane compound. Methyl is methane which has lost a hydrogen atom, making it unstable and reactive. Its chemical formula is -CH₃. This group occurs frequently in many organic compounds.

Learn More About Methyl at https://brainly.com/question/9578561

#SPJ4

The motion of the car creates an unbalanced backward force on the balloon. Because, the force of inertia drag the car backwards.

According to Newton's first law of motion, an objects tends to continue in its state of motion or rest until an external force acting on it. This tendency of the objects is called inertia.

The impacts of inertia can be well explained based on on real life examples. If we might had the experience of moving to front in a vehicle which suddenly breakes. It is the tendency of the vehicle to stay in motion.

Similarly the car when started from rest initially tends to stay at rest and that's why we feel it moves back ward. Similarly the car will move forward when it is suddenly stops. Therefore, the balloon that floats on the car will experience a backwards force.

Find more on more inertia:

brainly.com/question/3268780

#SPJ1

Latent heat under normal conditions occurs when a substance is changing state, and the loss or gain of energy occurs when the temperature of an object is decreasing/increasing.

Latent heat is the quantity of heat which is absorbed or released by a substance under a change of state, such as ice changes into water or water into steam, at constant temperature and pressure. There are three types or phases of the substance, those are: solid, liquid and gaseous.

When heat is exchanged between a hot and cold object, the temperature of the cold object goes on raising because of gaining the energy and the temperature of the hot object goes on reducing because of losing the energy.

This change in temperature continues until the temperature of both the objects reach the same value. In this process, the cold object produces heat energy and the hot object loses heat energy.

Learn more about heat energy at: https://brainly.com/question/20038450

#SPJ4

A perfume manufacturer may choose methyl butanoate for its fruity, sweet, and tropical aroma, its versatility as a fragrance ingredient, and its relatively low cost compared to other fragrance ingredients.

Methyl butanoate is a common fragrance ingredient used by perfume manufacturers because of its fruity, sweet, and tropical aroma. It has a characteristic ester odor similar to that of pineapple, and is therefore often used to impart a fruity note to perfumes and flavorings.

Methyl butanoate is also a versatile fragrance ingredient that can be blended with other aroma compounds to produce a wide range of fragrances. For example, it can be used in combination with floral, citrus, or woody notes to create unique and complex fragrances.

Additionally, methyl butanoate is a relatively low-cost fragrance ingredient, which is another reason why perfume manufacturers might choose to use it. Its low cost and versatility make it a popular choice for use in both high-end perfumes and mass-market fragrances.

In summary, perfume manufacturers may choose methyl butanoate for its fruity, sweet, and tropical aroma, its versatility as a fragrance ingredient, and its relatively low cost compared to other fragrance ingredients.

Learn more about methyl butanoate here:

https://brainly.com/question/24303563

#SPJ4

The mass percent of an element says how much gram of it is present in 100 g of the compound. Hence, the total percent is 100. Therefore, if the mass percent of Zn is 35.7, then the mass percent of oxygen is 64.3%.

The percentage composition of an element in a compound is the ratio of its mass to the total mass of the compound multiplied by 100. It is  common term to expresses the concentration and composition of constituent elements in a compound.

35.7 % of Zn in a compound of zinc and oxygen means, 35.7 g of zinc is present in 100 g of the compound. It is said that only Zn and oxygen is present in the compound.

Thus, mass percent of oxygen = 100 -35.7 = 64.3%.

Therefore, the percentage composition of oxygen in the compound is 64.3%.

Find more on percentage composition:

https://brainly.com/question/11952337

#SPJ1

As a result, the solution's molality is 13.88M. The mole fraction of water in the aqueous solution of glucose is 0.043.

The ratio of molecules of one component in a mixture is known as a mole fraction. For instance, if the methane mole fraction in a gas is 0.90, then this implies that 90% of the molecules are methane. The combination contains 90% methane since the amount fractions resemble mole fractions. Aqueous solutions are ones in which water serves as the solvent.

given that there are 2.5 molal of glucose in the aqueous solution.

As a result, 1 kg (1000 g) of water contains 2.5 moles of glucose. Given that this is an aqueous solution, the solvent in this case is water.

Number of water moles = 1000 / 18 (molar mass of water)

= 55.5 moles

Molefraction is equal to the number of moles divided by the total number of moles.

glucose moles are equal to total moles divided by glucose moles.

= 2.5 / (2.5+55.5)

= 0.043

Learn more about aqueous here-

https://brainly.com/question/30215562

#SPJ4

At the end of mitosis, the cells are genetically identical to each other. Therefore, option B is correct.

Mitosis is the process by which a cell replicates and then segregates its chromosomes, producing two identical nuclei in preparation for cell division.

Meiosis produces four haploid (n) gametes that are genetically distinct from each other and the original parent (germ) cell, whereas mitosis produces two diploid (2n) somatic cells.

Mitosis results in the formation of two identical daughter cells, each with the same number of chromosomes as the parent cell.

Thus, option B is correct.

To learn more about the mitosis, follow the link;

https://brainly.com/question/29776367

#SPJ1

Answer:

genetically identical to each other

Explanation:

Answer:

In order to calculate the pressure of the compressed air cylinder, we can use the Ideal Gas Law, which states that PV = nRT, where P is the pressure, V is the volume, n is the number of moles, R is the ideal gas constant, and T is the temperature.

In this case, we know that the initial volume of the living quarters is 20,000 liters and the pressure is 12.0 lbs/in2, and we want to find the pressure when the air is compressed into a 50.0 liter space. We can assume that the temperature is constant, and that the number of moles of air does not change. So we can rearrange the equation to P = (nRT)/V.

Now, we can substitute the given values:

P = (nRT)/V

P = (n*(0.08206)*(273))/(50.0)

Now we know that the pressure inside the compressed air cylinder is around 11,922.8 Pa (Pascals)

The number of moles alone does not determine the difference in chemical energy between reactants and products in a reaction. The difference in chemical energy, also known as the change in enthalpy (ΔH), depends on various factors such as the chemical properties of the reactants and products, the temperature and pressure conditions, and the reaction mechanism.

To calculate ΔH, we need to know the standard enthalpy of formation (ΔHf°) for each species involved in the reaction. ΔHf° is the change in enthalpy when one mole of a substance is formed from its constituent elements in their standard states. By using the equation ΔH = ΣΔHf° (products) - ΣΔHf° (reactants), we can determine the ΔH for the reaction.

It is important to note that ΔH can have different values for exothermic and endothermic reactions. An exothermic reaction releases heat and has a negative ΔH, while an endothermic reaction absorbs heat and has a positive ΔH. The magnitude of ΔH can provide information about the energy required or released in a reaction and can be used to predict the feasibility and rate of a reaction.

To know more about chemical energy: https://brainly.com/question/30288262

#SPJ4

After one hour, the concentration of the chemical in the tank will be 4 g/L.

This is calculated by taking the initial concentration of 1500 g/L, subtracting the amount of chemical that flows into the tank (90 g/L), and subtracting the amount of chemical that flows out of the tank (60 g/L).

This results in a concentration of 1440 g/L, which is then divided by the volume of the tank (600 L) to get a final concentration of 4 g/L.

This can be calculated as follows:

1500 g/L - 90 g/L - 60 g/L = 1440 g/L

Learn more about the concentration:

https://brainly.com/question/26255204

#SPJ4

HF, sometimes known as hydrofluoric acid, is a weak acid. However, as it is really a covalent molecule made of two nonmetals, it can alternatively be called hydrogen monofluoride.

Both hydrogen fluoride (HF) and hydrofluoric acid (HF) are extremely toxic, intensely irritating, and corrosive substances. If consumed, breathed, or in touch with the skin, hydrogen fluoride (HF), also known as hydrofluoric acid, is lethal. It damages the eyes and produces serious skin burns. After exposure, the effects might be postponed.

Any inorganic base, such sodium hydroxide or lime, can be used to neutralize the pH of hydrofluoric acid. Since hydrofluoric acid is indeed a single normal solution, each mole of HF releases one molecule of H+ or acid, which needs to be neutralized by one molecule of hydroxide (OH-).

To know more about hydrofluoric acid visit:

https://brainly.com/question/24194581

#SPJ4

The rate of the reaction increased when the concentration was increased.

When concentration increases, more reactant molecules collide.

According to the collision theory, the increased rate of collision will increase the rate of reaction.

The rate of a reaction is the rate at which product molecules are formed or the rate at which reactant molecules are converted.

The factors affecting the rate of a reaction are as follows:

Learn more about the rate of reaction at: https://brainly.com/question/23637409

#SPJ1

The term "pigment volume concentration" (PVC) simply refers to the volume fraction (or percentage) of the pigment in the overall volume of solids in the dried paint layer. PVC is calculated as Vp=Pigment Volume + Vb=Binder Volume.

The following equation makes it simple to calculate PVC: PVC is calculated as follows: V pigment = V pigment + V binder x 100, where V pigment and V binder are the volumes of the pigment and binder, respectively. Density and concealing also rise with an increase in PVC. PVC, or pigment volume concentration, is the ratio of the volume of non-volatile components in paint to the volume of pigment (not weight) in a paint film. Paint pigment and paint binder are examples of these non-volatile ingredients.

Learn more about volume fraction here:

https://brainly.com/question/30357796

#SPJ4