Answer:
I need the things after "which of the following would occur".
Explanation:
If you were to maintain a constant volume while decreasing pressure, the temperature would also have to decrease. This is Boyle's law.
How could you determine if a car door is made of a material, such as plastic?
Answer:Most cars have the visible outer panel, and supporting structure, made from steel. Some use aluminium, at least one series-produced model had magnesium doors, and there are also doors where the visible parts are plastic or fiberglass, with some sort of metal inside for strength.
Explanation:
Answer:
Most cars have the visible outer panel, and supporting structure, made from steel. Some use aluminium, at least one series-produced model had magnesium doors, and there are also doors where the visible parts are plastic or fiberglass, with some sort of metal inside for strength.
PLEASE HELP!
how can nuclear fission be made to happen?
a. atoms are hit with neutrons
b. atoms are hit with x rays
c. atoms are hit with light
d. atoms are hit with gases
Need help with these three pls!!!!!
bases have a pH of
a. more than 7
b. less than 7
c. 7
Answer:
Bases are more then 7
acids are less then 7 neutral is 7 and bases are more than
Answer:
A. More than 7
Explanation:
ph scale, bases are to the right
Which is usually associated with a faster reaction rate?
A. diluting a solution of the reactants
B. adding modeling clay to the reactants
C. removing heat energy from the reactants
D. using a solid with a high surface area in the reactants
Answer:
D. using a solid with a high surface area in the reactants, is your correct answer.
Explanation:
Using a solid with a high surface area in the reactants is usually associated with a higher reaction rate.
When a substance changes from a liquid to a solid, it has reached its _____ point
Answer:
The temperature at which a substance changes from the liq- uid state to the solid state is called the freezing point. The freez- ing point of the liquid state of a substance is the same temperature as the melting point of the solid state. For example, solid water melts at 0°C and liquid water freezes at 0°C.
Explanation:
which spheres are part of the earth system
Answer:
Everything in Earth's system can be placed into one of four major subsystems: land, water, living things, or air. These four subsystems are called "spheres." Specifically, they are the "lithosphere" (land), "hydrosphere" (water), "biosphere" (living things), and "atmosphere" (air).
Explanation:
The mole concept will most likely be used in
calculating the average height of a mountain range.
measuring how many liters of gasoline are poured into a tank.
determining how many ozone molecules are lost in the atmosphere.
finding the mass of a piece of steak in a butcher shop.
Answer:
determining how many ozone molecules are lost in the atmosphere
Pls Mark as Brainliest!!! if this helps...
The mole concept The mole concept can be used to determine the number of ozone molecules are lost in the atmosphere.
The mole concept was introduced by Avogadro. The mole is the SI unit of amount of substance. According to Avogadro, one mole of a substance contains 6.02 × 10^23 atoms, ions, molecules etc.
The mole concept is important in many chemical calculations. The mole concept can be used to determine the number of ozone molecules are lost in the atmosphere. (option C)
Learn more: https://brainly.com/question/7287712
Boiling water is an example of what type of what type of thermal energy transfer?
convection
conduction
insulation
radiation
Answer:
Conduction
Hot water is conducting heat because it is moving
Boiling water is an example of conduction heat transfer (option B).
What is heat transfer?Heat is one of the various forms in which energy can exist. Heat transfers with or without medium from one place to another.
There are three ways in which heat is transferred in the environment;
ConductionConvectionRadiationConduction is the conveying of heat or electricity through a solid material such as the material used to boil water in this case. Therefore, option B is correct.
Learn more about conduction at: https://brainly.com/question/31201773
#SPJ6
A weather forecast shows 35 m/h on the weather map. Which weather component does this number represent?
A.Humidity
B. Precipitation
C.Wind direction
D.Wind speed
Answer:
D. Wind Speed
Explanation:
When the question brings up 35 m/h, the m/h stands for Miles per Hour. What option can you measure the miles per hour. Here's a hint, it applies to cars as well when cops give your parents speeding tickets. Miles per Hour = Speed. So, you are measuring the wind speed.
Which resulted from the study of chemistry?
A) Alchemy to turn base metals into noble metals
B) the understanding of earth, air, fire, and water as the basic components of matter.
C) discovering the role of oxygen in combustion
D) a supernatural, mystical view of the world
How are electrons similar and different to the planet Earth?
Answer:
The planets themselves are composed of several trillions or quadrillions or more atoms. As far as hard science is concerned, it would be really hard to picture them as electrons. Conclusion: It can be said with a great accuracy that our planets are NOT huge electrons.
Rutherford's experiments showed that the mass of atoms was mostly concentrated in a very small region, with charge equal to the atomic number- the nucleus. He absolutely did not show, nor is it true, that electrons orbit the nucleus as if they were planets. That was a guess people made in trying to figure out how to picture the atom.
(Hope this helps) Sky
How many oxygen atoms and are present in this water molecule 2H2O?
(note* the number 2 after H is a subscript)
Answer: 4 hydrogen atoms and 2 oxygen atoms.
Explanation:
For example, two water molecules (2H2O) contain 2 • 2 = 4 hydrogen atoms and 2 • 1 = 2 oxygen atoms.
Why is wind named from where the wind is blowing from?
Winds are always named from the direction it blows from
Uneven heating of Earth's surface,in turn,causes differences in air pressure at various locations. Heated air rises,creating an area of low pressure beneath. Cooler air descends, creating an area of high pressure
what is the compound of p2o5
Answer:
Phosphorus pentoxide is a chemical compound with molecular formula P4O5 (with its common name derived from its empirical formula, P4O5). This white crystalline solid is the anhydride of phosphoric acid. It is a powerful dessicant and dehydrating agent.
Explanation:
it would be phosphoric acid.
Name some uses of Chlorine and bromine compounds
Answer:
kii
Explanation:
Help on science question please! (Small drawing) will mark brainliest
A solution with a H+ concentration of 1.00 x 10-7 M is said to be neutral. Why?
Answer:
Because when you find the pH it comes out to be 7; 7 is neutral.
Explanation:
pH=-log(H3O+)
- Hope this helped! Please let me know if you need further explanation.
A solution with a H+ concentration of 1.00 x 10-7 M is said to be neutral as on calculating pH, it comes out to be 7.
What is pH?pH, often known as acidity in chemistry, has historically stood for "potential of hydrogen" (as well as "power of hydrogen"). It refers to a scale used to describe how basic or how acidic an aqueous solution is. When compared to basic or alkaline solutions, acidic solutions—those with higher hydrogen (H+) ion concentrations—are measured with lower pH values.
Where [H+] represents the solution's equilibrium molar concentration of H+ (mol/L). Acidic solutions are those with a pH below 7, and basic solutions are those with a pH above 7, at a temperature of 25 °C (77 °F). At 25 °C, fluids with a pH value of 7 are neutral. A solution with a H+ concentration of 1.00 x 10-7 M is said to be neutral as on calculating pH, it comes out to be 7.
pH = -log[H⁺]
= -log[1.00 x 10⁻⁷]
= 7
Therefore, a solution with a H+ concentration of 1.00 x 10-7 M is said to be neutral as on calculating pH, it comes out to be 7.
To know more about pH, here:
https://brainly.com/question/15289741
#SPJ2
How many total atoms from Carbon are present on the reactant side?
20 points
2CH2+202
O2+HC4
5
2
1
3
Answer:
2 carbon atoms/molecules are present on the reactant side.
hope it helps!
Consider this reaction:
N2 (g) + 3H2 (9) = 2 NH3 (9). If Q ea, which statement is true?
O A.
The reaction will move forward.
B.
The reaction will move in reverse.
C.
The concentration of the product should decrease.
D.
The concentrations of the reactants should increase.
E.
The reaction is in equilibrium.
Answer:
Explanation:
its E
trust me i got a 100
Answer:
E. The Reaction Is In Equilibrium.
Explanation:
Plato Answer
CAN SOMEONE HELP PLS!!!
Answer:
Matals tend to LOSE electrons to become POSITIVE ions
0.450 moles of K2SO4 are dissolved in 195.0 mL of water. Calculate the molarity of the solution.
Answer:
2.31M
Explanation:
The following data were obtained from the question:
Mole of K2SO4 = 0.450 mole
Volume of water = 195.0 mL = 195/1000 = 0.195L
Molarity =...?
Molarity is defined as the mole of solute per unit litre of the solution. This can be expressed as:
Molarity = mole /Volume
With the above formula we can calculate the molarity of the K2SO4 solution as follow:
Molarity = mole /Volume
Molarity = 0.450/0.195
Molarity = 2.31M
please help, thank you:))
Explanation:
15 8 O ---> 15 7 N + 0 1 e
Element: Oxygen
Mass Number: 16 u
Decay: Beta
238 92 U ----> 234 90 Th + -4 -2 e
Element: Uranium
Mass Number: 238.051 u
Decay: Alpha
Over the past century, the percent of squirrels in the vicinity of Washington, DC, that are black instead of the more common gray has been continually increasing. Which of the following statements best explains why this is happening?
A.
Black squirrels are more visible against tree trunks than gray squirrels.
B.
Black squirrels are more popular with tourists than gray squirrels.
C.
Gray squirrels are more comfortable with humans than black squirrels.
D.
Black squirrels have a survival advantage over gray squirrels.
how does the Doppler effect related to the universal expanding?
The oxidation number of bromine in bromine gas is _____. A. 0 B. +1 C. –1 D. –2
Answer:
the answer is 0
The answer to the question is
A. 0
Which is a property of every heterogeneous mixture?
The mixture is made up of at least two different states.
The mixture is made up of something dissolved in a liquid.
The composition of the mixture is the same throughout.
The characteristics of the mixture change within a sample.
Answer:
D.) The characteristics of the mixture change within a sample
Explanation:
Because the guy above me is wrong
Answer:
D.) The characteristics of the mixture change within a sample.
Explanation:
HTH!! Have a good day!!! Don't forget to smile!!!!
Which of these would be an appropriate way to describe the concentration of orange candies? Check all that apply
the number of orange candies divided by total number of candies
the mass of orange candies divided by total mass of candies
the volume of brown candies divided by volume of orange candies
the actual number of orange candies
the number of orange candies divided by number of brown candies
the number of orange candies plus number of brown candies
Answer:
the number of orange candies divided by total number of candies
the mass of orange candies divided by total mass of candies
Explanation:
The two correct options that are appropriate to describe the concentration of orange candies would be the number of orange candies divided by total number of candies and the mass of orange candies divided by total mass of candies.
The concentration of a substance can be described as the fraction of that substance in a particular mix of substances.
In term of number, the concentration of a substance in a mix of substances can be expressed as the number of that substance divided by the total number of substances in the mix.
In term of mass, the concentration of a substance in a mix of substances can be expressed as the mass of that substance divided by the total mass of the mix.
Answer:
A, B, E
Explanation:
edge
To measure the volume of a washing machine, use:
liters
kiloliters
kilograms
tons
Answer:
kg
Explanation:
Answer:
You should use tons or kilograms because a washing machine is very heavy.
(Hope this helps)
The new-moon phase occurs when the Moon is positioned between the Earth and the Sun. However, these positions do not always cause an eclipse of the Sun because the *
a. Moon's orbit is tilted relative to the Earth's orbit
b. New-moon phase is visible only at night
c. Night side of the Moon faces toward the Earth
d. Apparent diameter of the Moon is greatest during the new-moon phase
Answer:
D
Explanation:
The new-moon phase occurs when the Moon is positioned between the Earth and the Sun. However, these positions do not always cause an eclipse blocking of the Sun because the Moon's orbit is tilted relative to the Earth's orbit new-moon phase is visible only at night side of the Moon faces toward the Earth apparent
These positions do not always cause an eclipse of the Sun as:
d. Apparent diameter of the Moon is greatest during the new-moon phase
New-moon phase:At the new Moon phase, the Moon is so close to the Sun in the sky that none of the side facing Earth is illuminated. The new-moon phase occurs when the Moon is positioned between the Earth and the Sun. However, these positions do not always cause an eclipse blocking of the Sun because the Moon's orbit is tilted relative to the Earth's orbit. New-moon phase is visible only at night side of the Moon faces toward the Earth apparent.
Thus, correct option is d.
Find more information about New-moon phase here: https://brainly.com/question/12676209
