Knowing the initial temperature and specific heat is necessary to calculate the value of Work = (kW) = (m * c * (500 - T_initial)) / 1000
The First Law of Thermodynamics, which states that the heat introduced to a system plus the work performed by the system equals the change in internal energy of a system, can be used to calculate the work performed by a system. in a system that is adiabatic.
ΔU = m * c * ΔT
where T is the change in temperature, c is the specific heat capacity, and m is the mass flow rate (in kg/s) (in K). The system's work can be encapsulated as:
W = ΔU
We can write: Given that the temperature at the compressor's outlet rose from the starting temperature to 500 K:
Knowing the initial temperature and specific heat is necessary to calculate the value of W.
W = m * c * (500 - T_initial)
W (kW) = (m * c * (500 - T_initial)) / 1000
Learn more about work Visit: brainly.com/question/25573309
#SPJ4
What differential manufacturer was used
in the Banks Power System Testing
Project?
Note that the differential manufacturer that was used in the Banks Power System Testing Project is AMSOIL Incorporated.
Who is AMSOIL?AMSOIL Inc. is a Wisconsin-based American firm that primarily formulates and produces synthetic lubricants, gasoline additives, and filters. Throughout the mid-to-late 1960s, company founder Albert J. Amatuzio created numerous synthetic motor oil formulas.
It is to be noted that a differential manufacturer is a company that produces and sells differentials, which are mechanical devices that allow the wheels of a vehicle to rotate at different speeds. Examples of differential manufacturers include Eaton, Dana, and GKN Automotive.
Learn more about power systems:
https://brainly.com/question/24500125
#SPJ1
the gage pressure at a depth of5 m in an open tant offiqjuid is 75 kpa. what are the specific weight and the specific grav.ity of. the liquid?
A 5 m depth in an open s'ils offiqjuid has a gage pressure of 75 kpa. which weights are specific P1/P2 = H1/H2 and P2 = H2*P1 P2=48*9/3=144kpa as a result.
We feel pressure, but why?When you fret about meeting your self or other people's expectations, you feel pressure. Additionally, you could experience it when circumstances are beyond your control and when you lack the time or resources to fulfill obligations.
Briefing
pressure density =p
The Gage pressure (P1)=48kpa
The height (h1)=3m
The Gage pressure (P2)=?
The height (h2)=9m
P=p * g * h
P1/P2=p * g * h1/p * g * h2
Cancelling out similar terms:
Therefore, P1/P2=h1/h2
P2=P1*h2/h1
Hence, P2=48*9/3=144kpa.
To know more about pressure visit:
https://brainly.com/question/14561908
#SPJ4
Essential component of social security are
Graph G is defined by the arrow diagram below. Select the pair of vertices such that there is no walk of length 4 in G from the first vertex to the second vertex. 4 0 4,3 O 2,1 0 1,3 O 1,4
A parabola is an equation of a curve with a point on it that is equally separated from a fixed point and a fixed line.
The equation represents a parabola with a vertex at (1,3) and an opening downward. A parabola is a mirror-symmetrical, roughly U-shaped planar curve in mathematics. Many seemingly unrelated mathematical descriptions that all correlate to the same curves can be used to define it. A parabola can be represented by a point and a line. The provided equation is 3x2 - 6x + 4y - 9 = 0. Plotting the graph of the given equation reveals that the parabola that results is opened downward and has a vertex at the point ( 1,3). Attached are the graph and the answer that follows. Option C is the right answer since it represents a parabola with a vertex at (1,3) opening downward.
Learn more about A parabola here:
https://brainly.com/question/21083314
#SPJ4
A worker was attempting
to correct an electrical problem involving two non-
operational lamps. He proceeded to the area where he thought the problem
was. He had not shut off the power at the circuit breaker panel nor had he
tested the wires to see if they were live. He was electrocuted when he
grabbed the two live wires and then fell from the ladder. What could have
been done to prevent this accident from occurring?
There are several things that could have been done to prevent this accident from occurring, including turning off the power, testing the wires, using appropriate personal protective equipment, etc.
What is safety procedure?A safety procedure is a series of directions or rules created to guarantee the security of employees in a specific working environment or while performing a specific task.
Several actions may have been taken to stop this catastrophe from happening, including:
Prior to attempting to work on the electrical system, turning off the power at the circuit breaker panel.Using a multimeter or a non-contact voltage tester, check to see if the wires are live.Protecting against electric shock by using the proper personal protection equipment (PPE), such as rubber gloves.Rather than attempting to do the electrical work yourself, have a certified electrician do it.Thus, the worker may have avoided the mishap and ensured a safe working environment by adhering to these safety procedures.
For more details regarding safety procedures, visit:
https://brainly.com/question/14480799
#SPJ9
When an emergency vehicle sounds its sirens or uses a flashing light, you: _________
The right thing to do is to let an emergency vehicle pass when it is being followed by another vehicle and its sirens and flashlights are audible or visible.
One must assume that any approaching vehicles with sirens or flashlights are either an ambulance, a fire department van, a police van, an army truck, or a VIP car. Given that the vehicle is an emergency vehicle and is operating on the road to address an emergency, a regular citizen is required to give it the side. So, one must allow an emergency vehicle to pass when it approaches using its sirens and flashlights in order to assist it in getting to its objective. Pass cautiously and with caution. On a road with two or more lanes, you must leave a lane of space between you and the emergency vehicle if it is safe to do so.
Learn more about Flashlights here:
https://brainly.com/question/11553031
#SPJ4
You can build coherence in your writing by includingtransitional expressions such as the following:for example, additionally,and consequently.a. Trueb. False.
Indeed, it demonstrates devotion when someone choose to prepare for an exam rather to go to a performance.
When a person complies with the rules despite hardships, for as by showing up to work when ill, that individual has demonstrated commitment. The completion of a subject's commitments, such as those related to his studies or job, is referred to as commitment. Maintaining commitments demonstrates leadership, accountability, and responsibility. An argument needs supporting data in order to be persuasive. If there were no laws or other supporting documentation for an argument, it would simply be pointless. I wanted to make the case, for instance, that the rule of conservation of energy is untrue. If I cannot provide concrete proof that energy is produced, my case will be weak and almost certainly unpersuasive.
Learn more about Commitment here:
https://brainly.com/question/30175166
#SPJ4
A moist rock mass is characterized by the following parameters: joint water pressure is nill; point load index is 3MPa; Joint spacing is 0.5m; and RQD is 55%; Joint condition is open joints filled with 5mm gouge. Classify the rock mass according to RMR method.
The RMR value is 413.15, which indicates that the rock mass is of excellent quality.
What is RMR method?The most important geologic criteria are combined by RMR, which depicts them as a single, comprehensive indicator of rock mass quality.
Based on the given parameters, we can use the Rock Mass Rating (RMR) method to classify the rock mass.
The RMR value is given by the formula:
RMR = 70Q + 10G + 5F + 8L + 7S - 3W
Using the given parameters, we can calculate the RMR value as follows:
Q = 10 x [tex](RQD/10)^{1/2[/tex] x (Jn + Ja + Jw + Jr + Jsr)
Where Jn, Ja, Jw, Jr, and Jsr are the joint sets orientations, number, water pressure, roughness, and spacing rating, respectively.
Since we do not have information about the joint orientations and roughness, we can assume that they have a neutral effect on the RMR value, which means that Jn=Ja=Jr=1 and Jw=Jsr=0.5.
Therefore,
Q = 10 x[tex](55/10)^{1/2[/tex] x (1 + 1 + 0.5 + 1 + 0.5) = 57.45
G = 0 (since joint water pressure is nil)
F = 5 (since the joint condition is open joints filled with gouge)
L = 8 - 2.6 x log10(0.5) = 5.44
S = 7 (since the joint condition is filled with 5mm gouge)
W = 0 (since joint water pressure is nil)
Thus, RMR = 7057.45 + 100 + 55 + 85.44 + 77 - 30 = 413.15
For more details regarding RMR method, visit:
https://brainly.com/question/30039261
#SPJ9
In the case below, the original source material is given along with a sample of student work. Determine whether the student is guilty of plagiarism.Original Source Material:There is a design methodology called rapid prototyping, which has been used successfully in software engineering. Given similarities between software design and instructional design, we argue that rapid prototyping is a viable method for instructional design, especially for computer-based instruction. References:Tripp, S. D., & Bichelmeyer, B. A. (1990). Rapid prototyping: An alternative instructional design strategy. Educational Technology Research and Development, 38(1), 31-44. Student Version:Rapid prototyping could be an advantageous methodology for developing innovative computer-based instruction (Tripp & Bichelmeyer, 1990). References:Tripp, S. D., & Bichelmeyer, B. A. (1990). Rapid prototyping: An alternative instructional design strategy. Educational Technology Research and Development, 38(1), 31-44. Which of the following is true for the Student Version above?
The act of presenting someone else's words or ideas as your own is known as plagiarism. By paraphrasing, you can put another person's ideas into your own words.
Is plagiarism possible when paraphrasing?Paraphrasing without crediting the original author is plagiarism because you are presenting someone else's ideas as if they were your own. However, paraphrasing is not plagiarism if the source is properly cited.
Is it illegal to copy someone else's work by paraphrasing?You might want to rephrase or paraphrase a book's paragraph or section for your paper if you like its content. Even though it is not against the law, paraphrasing must be cited inacademic papers as a professional courtesy.
To know more about paraphrasing visit :-
https://brainly.com/question/29890160
#SPJ4
2.8 For Fig.
2−30
a-d, find all equivalent resistances (Req): (a) (b) (c) Fig. 2-30 (d) (e) 2.9 For Fig. 2-31 a-d, find all equivalent resistances (Req): Fig. 2-31 (a) (c) (d)
2.10
Attach a
10 V
load to the terminals and find the voltage and current across each resistor in the above circuits of Fig.
2−31
. This work is licensed under a Creative Commons Attribution
4.0
International License.
The right response is to Consider Figure 1, which shows the electric field lines of a solitary positive point charge. An electric field line that is produced by a positive charge.
Radiation from RF (radio frequency) waves is produced by all computers. There is no proof that they are harmful unless the intensity is high enough to warm tissue (like a microwave oven). You are not putting yourself in danger if you use your computer for more than four hours each day (from radiation). Computers emit electromagnetic radiation into the environment. In particular, electromagnetic radiation that is visible light is produced. It is also possible for computers to produce other forms of electromagnetic radiation, such as radio waves, ultraviolet light, and infrared light, depending on the components of the device. Avoid using them an hour before going to bed. Even though it may be in your bedroom, you are under no obligation to use it.
Learn more about Electromagnetic radiation here:
https://brainly.com/question/30694959
#SPJ4
When an emergency vehicle sounds its sirens or uses a flashing light you must ________.
Answer:
О Turn on the flashing lights, slow down and give way to the emergency vehicle.
Explanation:
When an emergency vehicle sounds its sirens or using a flashing light you must:
Turn on the flashing lights.Slow down.Give way to the emergency vehicle.a brinell hardness measurement, using a 10-mm-diameter indenter and a 500 kg load, produces an indentation of 4.5 mm on an aluminum plate. determine the brinell hardness number (hb) of the metal.
The Brinell hardness test method involves pressing a 10 mm diameter hardened steel or carbide ball against the test material while applying a 3000 kg load.
Brinell hardness can be used to determine tensile strength?A and B together make up the equation y = Ax B. In this instance, y represents the maximum tensile strength, while x is the Brinell hardness value. These formulas were created by the statistical examination of data on Brinell hardness and the corresponding ultimate tensile strength using linear regression analysis.
Indentation hardness: How is it determined?The ratio of the applied load L to the projected area A p of the indent, where d is the length of the longest diagonal, is known as the Knoop hardness number (in mm).
To know more about Brinell hardness visit :-
https://brainly.com/question/29026244
#SPJ4
A rectangle has a width of 8 m and a length of 7 m. How does the area change when each dimension is multiplied by 5? responses the area is increased by a factor of 5. The area is increased by a factor of 5. The area is increased by a factor of 10. The area is increased by a factor of 10. The area is increased by a factor of 25. The area is increased by a factor of 25. The area is increased by a factor of 50.
Answer:
The area is increased by a factor of 5.
Answer:
25
Explanation:
when an emergency vehicle sounds its sirens or uses a flashing light, you
Answer:
must yield the right of way
Explanation:
3. The National Fire Protection Association (NFIPA) 704 Diamond Label system helps firefighters and employees
easily recognize the hazardous substances stored on the site.
A) © True
B) O False
The National Fire Protection Association (NFIPA) 704 Diamond Label system helps firefighters and employees easily recognize the hazardous substances stored on the site is A) True.
What is the statement about?The NFPA 704 Diamond Label is a standardized system used to identify the level of hazard posed by various substances. The label consists of a diamond-shaped sign with four sections, each color-coded to indicate the degree of hazard posed by the substance.
The system helps firefighters and other first responders quickly identify the potential risks posed by hazardous materials, which can help them make informed decisions and take appropriate safety measures.
Therefore, By providing clear and easily recognizable information about the hazards posed by various substances, the NFPA 704 Diamond Label system helps to promote safety and reduce the risk of accidents and incidents involving hazardous materials.
Learn more about firefighters from
https://brainly.com/question/25483991
#SPJ1
The given statement is true about the fact that the Diamond Label system helps firefighters and employees easily recognize the hazardous substances stored on the site.
What is NFIPA?The Standard System for the Identification of the Hazards of Materials for Emergency Response is a safety standard that describes how hazardous materials are identified for emergency responders.
The National Fire Protection Association (NFIPA) 704 makes it simple for employees and firemen to identify the many types of hazardous materials housed on the property.
The National Fire Protection Association publishes it to complement the labeling system for emergency responders and to be useful to those operating under regular circumstances.
Read more about fire protection here:
https://brainly.com/question/29634607
#SPJ1
Liquid/vapor saturation pressure P^sat is often represented as a function of temperature by an equation of the form: log10P^sat/( torr ) = a − t/∘C+cb Here, parameters a,b, and c are substance-specific constants. Suppose this equation is to be rewritten in the equivalent form:ln P^sat/kPa = A−T/K+CB Show how the parameters in the two equations are related. The parameters in the two equations are related as follows:A = ___ a - In (___)B = ___ bC = c - ____
when planning a greenfield sda design, what traditional lan design points should be included?
When planning a greenfield SDA design, some traditional LAN design points that should be included are:
Lear more about Traditional LANs
https://brainly.com/question/14424549
#SPJ11
bconvert the decimal number into it's binary equivalent 25.625
it's quite simple
Explanation:
25.62510 in binary
11001.1012
Dante uses ______ DSCP tags for QoS.
Dante employs layer 3 QoS tagging called DSCP (Diffserv).
What does DSCP mean?In contemporary Layer 3 IP networks, Differentiated Services Code Point (DSCP) is a technique for categorizing and controlling network traffic as well as for delivering quality of service (QoS). Differentiated services, also known as DiffServ, is an IP-based computer networking architecture that defines a method for categorizing, controlling, and delivering quality of service to network traffic on contemporary IP networks. DSCP Score. Using the 6 bits, DiffServ Code Point (DSCP) produces 26 = 64 distinct values (0 to 63). describes the values of the DSCP standards. The remaining DSCP values can be altered to meet the QoS specifications.
How does DSCP QoS work?Network data traffic classification is determined by Quality of Service (QoS) DSCP Marking. This can be used to identify the network traffic that uses more bandwidth, is more important, and has a higher chance of dropping packets.
To know more about DSCP visit:
https://brainly.com/question/29590727
#SPJ1
if humidity sensors are not used to control humidity, ? can control humidity by taking advantage of the relationships between temperature and humidity.
Temperature sensors can use the relationships between temperature and humidity to control humidity if humidity sensors are not utilized.
What benefits do temperature and humidity sensors provide?These instruments are used to measure the actual humidity of the air at any given location or point. When air conditions need to be controlled for a variety of reasons or when they may be extreme, such devices are frequently used.
Why is it crucial to keep an eye on the relative humidity?Controlling moisture around a finished product is by far and away the most important reason to monitor relative humidity. This typically entails ensuring that the RH does not rise too high.
To know more about Temperature sensor visit :-
https://brainly.com/question/14258631
#SPJ4
these usually result from wind and can travel hundreds of miles before they reach the shore. What is that?
Characteristic of a natural phenomenon called a "wind-driven ocean current" or a "wind-driven surface current", usually result from wind and can travel hundreds of miles before they reach the shore.
Wind-Driven Ocean Currents: A Natural Phenomenon with Far-Reaching ImpactsWind-driven surface currents are created by wind blowing over the surface of the ocean, causing the water to move in the direction of the wind. These currents can travel great distances, often for hundreds of miles, before eventually making landfall on a coastline or dissipating.
One example of a wind-driven surface current is the Gulf Stream, which is a powerful, warm ocean current that flows from the Gulf of Mexico up the eastern coast of North America and across the Atlantic Ocean. The Gulf Stream is driven by the prevailing winds and helps to regulate the climate of the eastern United States and Western Europe.
Wind-driven surface currents can have a significant impact on marine ecosystems and coastal communities. They can transport nutrients and plankton, which provide food for marine life, and they can also carry pollutants and debris, which can have negative impacts on coastal environments. Additionally, wind-driven surface currents can affect the movement of ships and boats, as well as the safety of swimmers and other ocean users.
To know more about wind-driven currents, visit:https://brainly.com/question/14054125
#SPJ4
Question 2 Generate four sinusoids with the following amplitudes and phases. Xi(t) = 5 cos (211 (15)t + 0. 51) X2 (t) = 5 cos (2n (15) t - 0. 25) x3 (t) = 5 cos (21 (15) t + 0. 411) X4 (t) = 5 cos (21 (15)t - 0. 9n) (a) Make a plot of all four signals over a range of t that will exhibit approximately 3 cycles. Make sure the plot includes negative time so that the phase at t = 0 can be measured. In order to get a smooth plot make sure that your have at least 20 samples per period of the wave. (b) Verify that the phase of all four signals is correct at t = 0 and also verify that each one has the correct maximum amplitude. Use subplot(3,2,i) to make a six-panel subplot that puts all of these plots on the same page. (c) Create the sum sinusoid via x5 (t) = x1(t) + x2(t) + x3 (t) + x4 (t). Make a plot of x5 (t) over the same range of time as used in the last plot. Include this as the lower panel in the plot by using subplot (3,1,3). (d) Measure the magnitude and phase of x5 (t) directly from the plot. In your lab report, include this plot with sufficient annotation to show how the magnitude and phase were measured. (e) Now do some complex arithmetic, create the complex amplitudes corresponding to the sinusoids x (t). Recall that x(t) = Acos(21864 +6)= Re{de'* ,254 Give the numerical values of 2, in polar and Cartesian form, where z = 4,21", i = 1,2,3,4,5 (t) Verify that x5 (t) = x1(t) + x2(t) + x3 (t) + x4(t). Show a plot of these five complex numbers as vectors. Relate the magnitude and phase of 3 to the plot of x (t) and explain
The cosine components to get the triangle's aspect are as follows: c = [a2 + b2 - 2ab cos C].
Where the triangle's edges are a, b, and c. The L is a remodel-pair that couples a DT sign with its continuous-frequency remodel and is primarily utilized in the assessment and design of DT systems. Lifestyles are essentially a way to ensure that the amount that constitutes a does not explode. It is easy to demonstrate this for sequences that can be summarized. The sum for n that ranges from minus infinity to plus infinity of x[n] instances e to the- j omega n in value is the same as the value of the at any factor omega if you take its value. Hence, F[cos0t] =[(0)+(+0)] is the Fourier transform of the cosine wave characteristic.
Learn more about Cosine here:
https://brainly.com/question/29891250
#SPJ4
an amplifier with 40 db of small-signal, open-circuit voltage gain, an input resistance of 1 m, and an output resistance of 100 , drives a load of 500 . what voltage and power gains (expressed in db) would you expect with the load connected? if the amplifier has a peak output-current limitation of 20 ma, what is the rms value of the largest sine-wave input for which an undistorted output is possible? what is the corresponding output power available?
14.14 V is the RMS value of the largest sine-wave input for which an undistorted output is possible. 100 mW is the corresponding output power available.
Voltage gain with load: Using the equation
[tex]A_{v} = A_{voc} \times \frac{R_l}{(R_i + R_l)}[/tex]
where
[tex]A_{voc}[/tex] is the open-circuit voltage gain,
Ri is the input resistance, and
Rl is the load resistance, one may determine the voltage gain when a load of 500 ohms is connected.
The formula for calculating the maximum undistorted rms input voltage is: Calculating the highest undistorted output power is as follows:
Imax = 20 mA
= 20 × 10⁻³ A
In this case,
[tex]A_{voc} = 10^{\frac{40}{20}}[/tex]
= 100, Ri
= 1 M Ohm,
and Rl = 500 Ohms,
so,
[tex]A_{v} = 100 \times \frac{500}{(1 + 500)}[/tex]
= 100 × (500/1.5)
= 33.33
The voltage gain in dB can be calculated as
20 × log(Av)
= 20 × log (33.33)
= 32.2 dB.
Ap = (33.33)² / 500
= 11.1
The power gain in dB can be calculated as
10 × log(Ap)
= 10 × log(11.1)
= 9.54 dB.
Vmax = Imax × Ri
= 20 × 10⁻³ × 1 × 10⁶
= 20 V
[tex]V_{rms} = \frac{V_{max}}{\sqrt{2}}[/tex]
[tex]= \frac{20}{\sqrt 2}[/tex]
= 14.14 V
Pmax = (Vrms)² / Rl
= (14.14)² / 500
= 0.1 W
= 100 mW
Learn more about power Visit: brainly.com/question/1634438
#SPJ4
The fracture strength of glass may be increased by etching away a thin surface layer. It is believed that the etching may alter the surface crack geometry (i. E. Reduce crack length and increase tip radius). Calculate the ratio of the etched and original crack tip radii if the fracture strength is increased by a factor of 4 when 63. 0% of the crack length is removed
Therefore, the difference between the original crack tip radius and the etched crack tip radius is 0.37.
The stress intensity factor (K), a measurement of the stress at a crack's tip, and a material's fracture strength are connected. Reducing the crack length and increasing the crack tip radius can increase a material's fracture strength, according to the stress intensity factor theory.
A reduction in the crack length of 1 - 0.63 = 0.37 is indicated by the removal of 63.0% of the crack length. Given that the fracture tip radius has presumably widened correspondingly, we can write:
Y1 * σ * √π * R1 = 4 * Y2 * σ * √π * R2
Dividing by Y2 * σ * √π, we get:
R1 / R2 = 4 * Y2 / Y1
R2 = R1 * (1 - 0.63) = R1 * 0.37
R1 / (R1 * 0.37) = 4 * Y2 / Y1
Dividing both sides by R1, we get:
1 / 0.37 = 4 * Y2 / Y1
R2 / R1 = 0.37 / 1 = 0.37
Learn more about fracture Visit: brainly.com/question/5404553
#SPJ4
Determine the length of welds required to transmit a load 54.5 KN between 12.7mm. thick plates, when the plates are to be joined by 1) Two parallel fillet welds. 2) Two transverse fillet welds.
For the parallel fillet weld, the length required is 24.52mm and for transverse fillet welds, the longer fillet weld required is 24.39 mm and the length of the shorter fillet weld required is 6.13 mm.
What is the length to transmit the loadThe length of weld required to transmit a load between two plates depends on the type of weld used and the strength of the material being welded. For the given scenario:
Two parallel fillet welds:
The length of each fillet weld required can be calculated using the following formula:
L = (2 x F x P) / (0.7 x T)
where L is the length of each fillet weld, F is the applied force (54.5 KN), P is the perimeter of the weld (2 x length of the joint), T is the thickness of the plate (12.7 mm), and 0.7 is a constant. Substituting the values, we get:
L = (2 x 54.5 x 2) / (0.7 x 12.7) = 24.52 mm
Therefore, the length of each fillet weld required is 24.52 mm.
Two transverse fillet welds:
The length of each fillet weld required in this case can be calculated using the same formula as above, but with the perimeter of the weld being the sum of the lengths of the two sides being welded. Since the two fillet welds are transverse, their lengths will be different. Assuming one fillet weld is longer than the other, we can calculate their lengths as follows:
L1 = (F x P1) / (0.7 x T)
L2 = (F x P2) / (0.7 x T)
where L1 and L2 are the lengths of the two fillet welds, P1 and P2 are the perimeters of the two sides being welded, and all other variables are the same as before. We can assume that the longer fillet weld is on the side with the higher applied force, so we have:
P1 = 2 x length of joint
P2 = length of joint
Substituting the values, we get:
L1 = (54.5 x 2 x 2) / (0.7 x 12.7) = 24.39 mm
L2 = (54.5 x 1) / (0.7 x 12.7) = 6.13 mm
Therefore, the length of the longer fillet weld required is 24.39 mm and the length of the shorter fillet weld required is 6.13 mm.
Learn more on applied force here;
https://brainly.com/question/25732012
#SPJ1
A 2.4-in diameter soap bubble is to be enlarged by blowing air into it. Taking the surface tension of solution to be 0.0027 ⁄, determine the work input (in ∙ ) required to inflate the bubble to a diameter of 2.7- in.
The work input required to inflate the bubble to a diameter of 2.7- in is 9.12 x 10⁻⁷.
What is work done?When an object is moved over a specific distance by an external force, the quantity of energy delivered to it is known as work.
Change in surface area
4π [2.7² - 2.4]
4π [7.29 -5.76]
19.22 m² = 19.22 x 0.083 = 0.132
Work done = surface tension x change into area
T x 2A
0.0027 x 2 x 0.132 lbf
0.00071 lbt. H
0.0007 x 0.00128 Bt
9.12 x 10⁻⁷
Therefore, the work input required to inflate the bubble to a diameter of 2.7- in is 9.12 x 10⁻⁷.
To learn more about the work done, refer to the link:
https://brainly.com/question/24146709
#SPJ9
Find the surface area of a square pyramid with a base length of 24cm and a height of 16cm.
The area of a square pyramid with a height of 16 cm and a base length of 24 cm is 1536 cm2.
What does the square pyramid's surface area represent?A square pyramid's surface area is the sum of the square's base area and the areas of its four triangular side faces. The square pyramid's surface area is equal to a2+2al (or) a2+2a a24+h2 a 2 4 + h 2 if a, h, and l are the base length, pyramid height, and slant height, respectively.
How is the pyramid's formula found?The formula V = (1/3) Bh, where B is the base area and h is the height of the pyramid, can be used to calculate the volume of a pyramid. Since any polygon can serve as a pyramid's base, we can use formulas for the area of polygons to locate "B."
To know more about base length visit :-
https://brainly.com/question/12180117
#SPJ4
the code does not cover installations under the exclusive control of an electrical utility such as ____.
The correct answer is The Code does not apply to installations in boats other than those used for floating structures, rail vehicles, aeroplanes, and automobiles other than those used for mobile homes and leisure vehicles.
One of the most important avionics systems of a contemporary aeroplane is the flight management system (FMS). A sophisticated computer system called an FMS automates a wide range of in-flight activities, lightening the strain on the flight crew to the point where flight engineers and navigators are no longer carried on modern commercial aircraft. A modern Airbus A320 short-haul airliner has roughly 2,000 computers running. They oversee the engines, inspect the restrooms, and manage the air conditioning system, but they also assist the pilot in flying the aircraft. The time when a pilot completely comprehended his aircraft is long past. The Air Data Inertial Reference Unit, which is used in Airbus aircraft, combines the air data computer with sources for altitude, direction, and navigation into a single device (ADIRU).
To learn more about aeroplanes click on the link below:
brainly.com/question/820182
#SPJ4
If this code is from the first page of this application, what do the three tags display the second time this page is executed?
The if statement will execute some code if a condition is true. If a condition is true, the if...else statement executes one piece of code; if it is false, another piece of code is executed.
In a SQL statement, the WHERE clause specifies conditions that field values must satisfy in order for the records containing the values to be returned in the query results. The "=" assignment operator is the default one in PHP. What it actually implies is that the left operand is set to the value of the assignment expression on the right. A web page, which is also referred to as a website, is just a written piece of information that can be seen in an Internet browser and is typically created in HTML. You can go to this by entering a URL in your browser's address bar.
Learn more about If statement here:
https://brainly.com/question/30580931
#SPJ4
a)Develop an expression relating Vo to Vi for the case when the integrator is driven by a sinusoidal input signal.
b)Derive the transfer function Vo/Vi for the integerator wth a resistor added in parallel with the capacitor. Why does the addition of this resistor help eliminate effects of dc offset and drift?
The output of the system is theoretically simulated for each probable input by a mathematical function known as a system function or network function of a system, sub-system, or component.
In electronics and control systems, they are commonly employed. This function sometimes referred to as a transfer curve or characteristic curve, is a two-dimensional graph of an independent scalar input vs a dependent scalar output. In electronics and control theory, transfer functions for components are used to construct and assess systems made up of components, particularly when utilizing the block diagram technique. The transfer function's parameters and units replicate the device's output response to a variety of potential inputs. If L = 1H, Vo (s) is equal to Vi(s) * sL 1 / 1 + sL 1 = Vi (s) * s1 / 1+ s1. The formula for Vo (s) is Vi (s) * s*1/s+1/s*1/s+1 + 1.G(s) = s/2s + 1 G(s) = Vo(s)/Vi(s) = s/s + 1+
Learn more about A transfer curve here:
https://brainly.com/question/29751748
#SPJ4
