A ball is dropped from the top of a window 28 m from the ground. Every time the ball bounces, it loses 16% of its height. Calculate the total vertical distance the ball travelled by the time the ball touches the ground at the 10th bounce. (Round final solution to 2 decimals.)
The total vertical distance traveled by the ball is approximately 14.22 meters.
To calculate the total vertical distance the ball traveled by the time it touches the ground at the 10th bounce, we need to consider the height of each bounce.
The initial height of the ball is 28 meters.
After the first bounce, the ball reaches a height of (100% - 16%) of the initial height, which is 84% of 28 meters.
After the second bounce, the ball reaches a height of (100% - 16%) of the previous height, which is 84% of 84% of 28 meters.
We can observe that the height after each bounce forms a geometric sequence with a common ratio of 0.84 (100% - 16%).
To calculate the height after the 10th bounce, we can use the formula for the nth term of a geometric sequence:
hn = a * r^(n-1)
where:
- hn is the height after the nth bounce
- a is the initial height
- r is the common ratio
- n is the number of bounces
Using the given values:
a = 28 meters
r = 0.84
n = 10
We can calculate the height after the 10th bounce:
h10 = 28 * 0.84^(10-1)
h10 ≈ 28 * 0.84^9 ≈ 28 * 0.254 ≈ 7.11 meters
The total vertical distance traveled by the ball by the time it touches the ground at the 10th bounce is twice the height of the 10th bounce:
Total distance = 2 * h10 ≈ 2 * 7.11 ≈ 14.22 meters
Therefore, the total vertical distance traveled by the ball is approximately 14.22 meters.
Learn more about geometric sequence here:
https://brainly.com/question/27852674
#SPJ11
Consider for a given economy, the production function is: Y = Ka(AN)¹-a where Y is the total output with a = 1/3, K represents the capital used in the production process and AN represents the number of effective worker used in the production process. Also, saving rate (s) = 5%, depreciation rate (8) = 2%, rate of population growth (9N) = 1%, rate of technological progress (gA) = 2%. Calculate the steady state values of the following for this economy: 1. The growth rate of output and the growth rate of output per effective worker (5 points) 2. The growth rate of capital stock per effective worker (5 points)
the growth rate of the capital stock per effective worker is -2.74% per year.
Steady state refers to the point at which an economy has reached an equilibrium point and can no longer expand or contract. The growth rates of output and output per effective worker, as well as the growth rate of the capital stock per effective worker, can be determined using the following equations for the given economy:
Y = Ka(AN)¹-a
where Y is total output, K is capital, A is effective workers, N is the population, a = 1/3 is the share of output allocated to labor, and s = 0.05 is the saving rate.1.
Growth rate of output
The growth rate of output, g, can be determined using the equation:
g = sK - (g + δ)K + (1 + gA)A¹-a
This equation gives us the steady-state value of g, which is:
g = 0.05K - (0.02 + 0.01)K + (1 + 0.02)A¹-a
Simplifying:g = 0.03K + 1.03A¹-aThe steady-state value of g can now be calculated as follows:0 = 0.03K + 1.03A¹-agg = -1.03/0.03A¹-a/K= 34.33
Therefore, the growth rate of output is 34.33% per year.
2. Growth rate of capital stock per effective worker
The growth rate of the capital stock per effective worker, gk, can be determined using the equation:
gk = sY/A - (δ + g)k
This equation gives us the steady-state value of gk, which is:
gk = 0.05Y/A - (0.02 + 0.01)k
Simplifying:
gk = 0.03k + 0.05Ka¹-a/A
The steady-state value of gk can now be calculated as follows:0 = 0.03k + 0.05Ka¹-a/Ag
k = -0.05Ka¹-a/0.03Aa/K= - 1.67a = 1/3gk = -0.05A^(-2/3)K^(1/3)
Therefore, the growth rate of the capital stock per effective worker is -2.74% per year.
learn more about growth rate here
https://brainly.com/question/25849702
#SPJ11
A Population Of Bacteria Is Growing According To The Equation P(T)=1850e^0.21t. Estimate When The Population Will Exceed 6386. T=
A population of bacteria is growing according to the equation P(t)=1850e^0.21t. Estimate when the population will exceed 6386.
t=
To estimate when the population will exceed 6386, we can set up the following inequality:
P(t) > 6386
Substituting the given equation for P(t), we have:
1850e^0.21t > 6386
Dividing both sides by 1850, we get:
[tex]e^0.21t > 6386/1850[/tex]
Taking the natural logarithm (ln) of both sides to isolate the exponent:
[tex]ln(e^0.21t) > ln(6386/1850)[/tex]
Using the logarithmic property, [tex]ln(e^x)[/tex] = x, we simplify further:
0.21t > ln(6386/1850)
Dividing both sides by 0.21:
t > ln(6386/1850) / 0.21
Now, we can use a calculator to find the numerical value:
t > 7.043
Therefore, the population will exceed 6386 at approximately t = 7.043 (rounded to three decimal places).
Learn more about inequality here:
https://brainly.com/question/24372553
#SPJ11
Determine where the function f(x) is continuous. f(x)=√x-1 The function is continuous on the interval (Type your answer in interval notation.) ...
The function f(x) = √(x - 1) is continuous on the interval [1, ∞).
To determine the interval where the function f(x) = √(x - 1) is continuous, we need to consider the domain of the function.
In this case, the function is defined for x ≥ 1 since the square root of a negative number is undefined. Therefore, the domain of f(x) is the interval [1, ∞).
Since the domain includes all its limit points, the function f(x) is continuous on the interval [1, ∞).
Thus, the correct answer is [1, ∞).
In interval notation, we use the square bracket [ ] to indicate that the endpoints are included, and the round bracket ( ) to indicate that the endpoints are not included.
Therefore, the function f(x) = √(x - 1) is continuous on the interval [1, ∞).
learn more about function
https://brainly.com/question/30721594
#SPJ11
Consider the full and reduced singular value decompositions (SVD) of a square matrix A = UΣVH, for both SVDs, which of the flowing statements is correct: [1] U, V must be the same orthogonal matrices; [2] U-¹ = UH, VH = V-¹; [3] Σ must be different from each other; [4] U, V may have the same rank. (a) [1], [2], [3], [4] (b) Only [2] (c) Only [4] (d) None of [1], [2], [3], [4]
For the given problem, the correct statement is option (c) Only [4].
Let's analyze each statement:
[1] U, V must be the same orthogonal matrices:
This statement is incorrect. The orthogonal matrices U and V are not necessarily the same. The columns of U form an orthonormal basis for the domain of A, while the columns of V form an orthonormal basis for the range of A.
In general, the dimensions of the domain and range can be different, so U and V may have different sizes and therefore cannot be the same orthogonal matrices.
[2] U⁻¹ = Uᴴ, VH = V⁻¹:
This statement is incorrect. The correct relationship is U⁻¹ = Uᴴ, and VH = Vᴴ. The inverse of an orthogonal matrix is equal to its conjugate transpose. The conjugate transpose of U is denoted by Uᴴ, not U⁻¹.
[3] Σ must be different from each other:
This statement is incorrect. The singular values in Σ may be different, but the number of singular values is the same. For a square matrix A, the number of singular values is equal to the dimension of A. The singular values represent the magnitudes of the singular vectors in U and V that correspond to each column in Σ.
However, the order of the singular values in Σ may be different, but they correspond to the same columns in U and V.
[4] U, V may have the same rank:
This statement is correct. The rank of a matrix A is equal to the number of non-zero singular values in Σ. The ranks of U and V can be different, but they may also have the same rank if A is a square matrix.
The rank of U corresponds to the number of non-zero singular values in the diagonal matrix Σ, and the rank of V corresponds to the number of non-zero singular values in the diagonal matrix Σᴴ.
Therefore, the correct statement is (c) Only [4].
To learn more about orthogonal matrices visit:
brainly.com/question/31770385
#SPJ11
Determine where the function is concave upward and where it is concave downward. (Enter your answer using interval notation. If an answer does not exist, enter ONE.) g(x)=3x²³-7x concave upward concave downward Need Help? Read
The function g(x) = 3x^2 - 7x is concave upward in the interval (-∞, ∞) and concave downward in the interval (0, ∞).
To determine the concavity of a function, we need to find the second derivative and analyze its sign. The second derivative of g(x) is given by g''(x) = 6. Since the second derivative is a constant value of 6, it is always positive. This means that the function g(x) is concave upward for all values of x, including the entire real number line (-∞, ∞).
Note that if the second derivative had been negative, the function would be concave downward. However, in this case, since the second derivative is positive, the function remains concave upward for all values of x.
Therefore, the function g(x) = 3x^2 - 7x is concave upward for all values of x in the interval (-∞, ∞) and does not have any concave downward regions.
learn more about concavity here:
https://brainly.com/question/30340320?
#SPJ11
The rate in which the balance of an account that is increasing is given by A'(t)=375e^(0.025t). (the 0.025t is the exponent on the number e) If there was $18,784.84 dollars in the account after it has been left there for 9 years, what was the original investment? Round your answer to the nearest whole dollar. Select the correct answer below: O $14,000 O $14,500 O $15,000 O $15,500 O $16,000 O $16,500 O $17,000
The original investment was $33,784.84. Rounding it to the nearest whole dollar, the answer is $33,785.
To calculate the original investment, we start with the given rate of change of the account balance: [tex]$A'(t) = 375e^{0.025t}$[/tex]. We need to integrate [tex]$A'(t)$[/tex] to find the original investment, denoted as [tex]$A(t)$[/tex]. Integrating both sides, we have:
[tex]\[\int \frac{dA}{dt} dt = \int 375e^{0.025t} dt\][/tex]
Integrating the right side, we get:
[tex]\[A(t) = 15,000e^{0.025t} + C\][/tex]
Now we need to determine the value of the constant [tex]$C$[/tex] using the information provided. We know that after 9 years, the balance in the account is 18,784.84. So, we can set up the equation:
[tex]\[A(9) = 15,000e^{0.025(9)} + C\][/tex]
Simplifying further:
[tex]\[18,784.84 = 15,000e^{0.225} + C\][/tex]
Thus, [tex]$C = 18,784.84 - 15,000e^{0.225}$[/tex].
Substituting the value of C back into our equation, we have:
[tex]\[A(t) = 15,000e^{0.025t} + (18,784.84 - 15,000e^{0.225})\][/tex]
To find the original investment, we set $t = 0$:
[tex]\[A(0) = 15,000e^{0} + (18,784.84 - 15,000e^{0.225})\][/tex]
Simplifying further:
[tex]\[A(0) = 15,000 + (18,784.84 - 15,000e^{0.225})\][/tex]
[tex]\[A(0) = 33,784.84\][/tex]
Therefore, the original investment was $33,784.84. Rounding it to the nearest whole dollar, the answer is $33,785.
Learn more about original investment
https://brainly.com/question/32791749
#SPJ11
Use limits to find the derivative function f' for the function f. b. Evaluate f'(a) for the given values of a. 2 f(x) = 4 2x+1;a= a. f'(x) = I - 3'
the derivative function of f(x) is f'(x) = 8.To find f'(a) when a = 2, simply substitute 2 for x in the derivative function:
f'(2) = 8So the value of f'(a) for a = 2 is f'(2) = 8.
The question is asking for the derivative function, f'(x), of the function f(x) = 4(2x + 1) using limits, as well as the value of f'(a) when a = 2.
To find the derivative function, f'(x), using limits, follow these steps:
Step 1:
Write out the formula for the derivative of f(x):f'(x) = lim h → 0 [f(x + h) - f(x)] / h
Step 2:
Substitute the function f(x) into the formula:
f'(x) = lim h → 0 [f(x + h) - f(x)] / h = lim h → 0 [4(2(x + h) + 1) - 4(2x + 1)] / h
Step 3:
Simplify the expression inside the limit:
f'(x) = lim h → 0 [8x + 8h + 4 - 8x - 4] / h = lim h → 0 (8h / h) + (0 / h) = 8
Step 4:
Write the final answer: f'(x) = 8
Therefore, the derivative function of f(x) is f'(x) = 8.To find f'(a) when a = 2, simply substitute 2 for x in the derivative function:
f'(2) = 8So the value of f'(a) for a = 2 is f'(2) = 8.
learn more about derivative function here
https://brainly.com/question/12047216
#SPJ11
The input-output diagram represents F(x)=x+2.
What is the missing output value?
A. 5
B. 8
C. 6
D. 7
Input
5
6
7
8
9
Output
?
8
9
10
11
The missing output value is given as follows:
D. 7.
How to find the numeric value of a function at a point?To obtain the numeric value of a function or even of an expression, we must substitute each instance of the variable of interest on the function by the value at which we want to find the numeric value of the function or of the expression presented in the context of a problem.
The function for this problem is given as follows:
F(x) = x + 2.
The output when x = 5 is then given as follows:
F(5) = 5 + 2
F(5) = 7.
A similar problem, also featuring numeric values of a function, is given at brainly.com/question/28367050
#SPJ1
Select the basic integration formula you can use to find the indefinite integral. 1 dt 이 36 du U- du of ar du 1. du 22 +42 Identify u and a. u= 2 = Need Help? Submit Answer 이 Read It Watch It
The basic integration formula that can be used to find the indefinite integral is 1 dt.
The basic integration formula for the indefinite integral of 1 dt states that the integral of a constant function (in this case, the constant function 1) with respect to the variable t is equal to the antiderivative of the function.
In simpler terms, when integrating a constant function, we can think of it as finding the function whose derivative would be equal to that constant. In this case, integrating 1 with respect to t gives us the function t + C, where C is the constant of integration.
The indefinite integral of 1 dt is t + C.
The indefinite integral of 36 du is 36u + C.
The integral of ar du does not fit the basic integration formula provided.
The indefinite integral of 1 du is u + C.
The indefinite integral of 22 + 42 is 64u + C.
To know more about indefinite integral,
https://brainly.com/question/27548304
#SPJ11
Find the composite functions (f o g) and (g o f). What is the domain of each composite function? (Enter your answer using interval notation.) 4 f(x) = X g(x) = x² - 9 (fog)(x) = domain (gof)(x) = = domain Are the two composite functions equal? O Yes O No
To find the composite functions (f o g) and (g o f), we substitute the expression for g(x) into f(x) and vice versa.
First, we find (f o g)(x):
(f o g)(x) = f(g(x)) = f(x² - 9)
Next, we find (g o f)(x):
(g o f)(x) = g(f(x)) = g(x)
Now, let's determine the domain of each composite function.
For (f o g)(x), the domain is determined by the domain of g(x), which is all real numbers since there are no restrictions on x² - 9. Therefore, the domain of (f o g)(x) is (-∞, ∞). For (g o f)(x), the domain is determined by the domain of f(x), which is all real numbers since there are no restrictions on x. Therefore, the domain of (g o f)(x) is also (-∞, ∞). Lastly, to determine if the two composite functions are equal, we compare their expressions:
(f o g)(x) = f(x² - 9)
(g o f)(x) = g(x)
Since f(x) and g(x) are different functions, in general, (f o g)(x) is not equal to (g o f)(x).
learn more about functions here:
https://brainly.com/question/17247795
#SPJ11
Suppose f:(0,1)→ (0,1) is the Dirichlet's function, defined by if x=- Pin lowest terms with p, q € N f(x) = q 9 0, if x is irrational. See Example 3.2.10 and Exercise 8 of Section 6.2. Show that f is not differentiable at any point in (0,1).
Σ* is the Kleene Closure of a given alphabet Σ. It is an underlying set of strings obtained by repeated concatenation of the elements of the alphabet.
For the given cases, the alphabets Σ are as follows:
Case 1: {0}
Case 2: {0, 1}
Case 3: {0, 1, 2}
In each of the cases above, the corresponding Σ* can be represented as:
Case 1: Σ* = {Empty String, 0, 00, 000, 0000, ……}
Case 2: Σ* = {Empty String, 0, 1, 00, 01, 10, 11, 000, 001, 010, 011, 100, 101, 110, 111, ……}
Case 3: Σ* = {Empty String, 0, 1, 2, 00, 01, 02, 10, 11, 12, 20, 21, 22, 000, 001, 002, 010, 011, 012, 020, 021, 022, 100, 101, 102, 110, 111, 112, 120, 121, 122, 200, 201, 202, 210, 211, 212, 220, 221, 222, ……}
Thus, 15 elements from each of the Σ* sets are as follows:
Case 1: Empty String, 0, 00, 000, 0000, 00000, 000000, 0000000, 00000000, 000000000, 0000000000, 00000000000, 000000000000, 0000000000000, 00000000000000
Case 2: Empty String, 0, 1, 00, 01, 10, 11, 000, 001, 010, 011, 100, 101, 110, 111
Case 3: Empty String, 0, 1, 2, 00, 01, 02, 10, 11, 12, 20, 21, 22, 000, 001
From the above analysis, it can be concluded that the Kleene Closure of a given alphabet consists of all possible combinations of concatenated elements from the given alphabet including the empty set. It is a powerful tool that can be applied to both regular expressions and finite state automata to simplify their representation.
To know more about expression click-
http://brainly.com/question/1859113
#SPJ11
Given the following functions, find and simplify (f⋅g)(5.5). f(x)g(x)=−x+6=−12x−6
To find and simplify [tex]\((f \cdot g)(5.5)\)[/tex] for the functions [tex]\(f(x) = -x + 6\)[/tex] and [tex]\(g(x) = -12x - 6\)[/tex], we need to multiply the two functions together and evaluate the result at [tex]\(x = 5.5\).[/tex]
Let's calculate the product [tex]\(f \cdot g\):[/tex]
[tex]\[(f \cdot g)(x) = (-x + 6) \cdot (-12x - 6)\][/tex]
Expanding the expression:
[tex]\[(f \cdot g)(x) = (-x) \cdot (-12x) + (-x) \cdot (-6) + 6 \cdot (-12x) + 6 \cdot (-6)\][/tex]
Simplifying:
[tex]\[(f \cdot g)(x) = 12x^2 + 6x - 72x - 36\][/tex]
Combining like terms:
[tex]\[(f \cdot g)(x) = 12x^2 - 66x - 36\][/tex]
Now, let's evaluate [tex]\((f \cdot g)(5.5)\)[/tex] by substituting [tex]\(x = 5.5\)[/tex] into the expression:
[tex]\[(f \cdot g)(5.5) = 12(5.5)^2 - 66(5.5) - 36\][/tex]
Simplifying the expression:
[tex]\[(f \cdot g)(5.5) = 12(30.25) - 66(5.5) - 36\][/tex]
[tex]\[(f \cdot g)(5.5) = 363 - 363 - 36\][/tex]
[tex]\[(f \cdot g)(5.5) = -36\][/tex]
Therefore, [tex]\((f \cdot g)(5.5)\)[/tex] simplifies to [tex]\(-36\).[/tex]
To know more about expression visit-
brainly.com/question/18882901
#SPJ11
Use a software program or a graphing utility with metrix capabilities to write vas a linear combination of u, u u us and us. Then verty your solution. (Enter your answer in terms of 1.₂.3, and us) v (4,-1,-10, 8, 11) u₁ = (1, 2, -3,4,-1). u₂ (1, 2, 0, 2, 1) calePad Operation Functions u₁ (0, 1, 1, 1,-4) (2.1.-1.2.1) us (0, 2, 2,-1,-1). Ratons Sets x Need Help? Rood Victors Tog + I LED The zero vector 0 (0, 0, 0) can be written as a linear combination of the vectors v₁, v₂ and v, because 0-0, 400v. This is called the frivial solution. Can you find a montrivial way of writing o as a linear combination of the three vectors? (Enter your answer in terms of v₁, V₂, and vs. If not possible, enter IMPOSSIBLE.) V₁ (1, 0, 1), ₂(-1, 1, 2), (0, 1, 2) 0=
It is impossible to write the zero vector as a linear combination of the vectors v₁, v₂, and v₃.
To find a linear combination of vectors that equals the zero vector, we need to solve a system of linear equations. Let's consider the vectors v₁ = (1, 0, 1), v₂ = (-1, 1, 2), and v₃ = (0, 1, 2).
We want to find constants c₁, c₂, and c₃ such that c₁v₁ + c₂v₂ + c₃v₃ = (0, 0, 0). Setting up the system of equations, we have:
c₁ - c₂ + 0c₃ = 0
0c₁ + c₂ + c₃ = 0
c₁ + 2c₂ + 2c₃ = 0
Solving this system, we find that c₁ = 0, c₂ = 0, and c₃ = 0. This means that the only way to express the zero vector as a linear combination of v₁, v₂, and v₃ is by taking all coefficients to be zero. This is called the trivial solution.
Therefore, the nontrivial solution to expressing the zero vector as a linear combination of the given vectors v₁, v₂, and v₃ does not exist. In other words, it is impossible to write the zero vector as a linear combination of v₁, v₂, and v₃.
Learn more about vectors here:
https://brainly.com/question/31265178
#SPJ11
I will introduce a new way of calculating combination For example, we want to calculate = 1) Write it as a fraction: 2) On the denominator, we count up from 1 four times: 3) On the numerator, we count down from 7 four times: 7-6-5-4 7-6-5 = = 1.2.3.4 1.2.3 4) Simplify and get the final answer: Now, use this method to calculate the followings: a) b) a) a) (2) without a calculator. We will do the followings: 1.2.3.4 3 5 = 7.6.5.4 1.2.3.4 = 7.5 = 35
The new method you presented for calculating combinations is a variation of the factorial notation. It involves expressing the combination as a fraction and simplifying it by canceling out common factors in the numerator and denominator. This approach can be used to calculate combinations without using a calculator.
In the first example, you provided the combination . Using the method, we can write it as a fraction:
On the denominator, we count up from 1 four times:
On the numerator, we count down from 7 four times:
Simplifying the fraction, we get:
This gives us the final answer, 35.
For the second example, you mentioned calculating . Using the same method, we can write it as:
Simplifying the numerator and denominator, we have:
Which simplifies further to:
Therefore, the value of the combination is 35.
This method provides an alternative approach to calculate combinations, especially when a calculator is not available or preferred. It relies on canceling out common factors between the numerator and denominator to simplify the expression and obtain the final answer.
To learn more about Denominator - brainly.com/question/32621096
#SPJ11
For the given matrix A= 0 -3 0 -4 7 2 (a) Find all eigenvalues and present them in the ascending order. [25 marks] (b) Which of two given vectors V₁ and v2 is the eigenvector of the matrix A, where v₁¹ = (1, 0, 4) and v₂¹ = (1, 0, -4)? What is the corresponding eigenvalue? [20 marks]
(a) The eigenvalues of matrix A in ascending order are λ₁ = -7 - √37 and λ₂ = -7 + √37. (b) The vector v₁ = (1, 0, 4) is the eigenvector of matrix A with the corresponding eigenvalue λ₁ = -7 - √37.
(a) To find the eigenvalues of the matrix A, we need to solve the characteristic equation det(A - λI) = 0, where λ is the eigenvalue and I is the identity matrix.
The matrix A is:
A = [0 -3 0]
[-4 7 2]
The characteristic equation is:
det(A - λI) = 0
Substituting the values into the characteristic equation, we have:
|0-λ -3 0 |
|-4 7-λ 2 | = 0
| 0 0 -4-λ|
Expanding the determinant, we get:
(-λ)(7-λ)(-4-λ) + (-3)(-4)(2) = 0
-λ(λ-7)(λ+4) + 24 = 0
-λ(λ²+4λ-7λ-28) + 24 = 0
-λ(λ²-3λ-28) + 24 = 0
-λ²+3λ²+28λ + 24 = 0
2λ² + 28λ + 24 = 0
λ² + 14λ + 12 = 0
Using the quadratic formula, we can solve for the eigenvalues:
λ = (-b ± √(b² - 4ac)) / (2a)
In this case, a = 1, b = 14, and c = 12. Plugging these values into the quadratic formula, we get:
λ = (-14 ± √(14² - 4(1)(12))) / (2(1))
λ = (-14 ± √(196 - 48)) / 2
λ = (-14 ± √148) / 2
λ = (-14 ± 2√37) / 2
λ = -7 ± √37
Therefore, the eigenvalues of matrix A in ascending order are:
λ₁ = -7 - √37
λ₂ = -7 + √37
(b) To determine which of the given vectors, v₁ and v₂, is the eigenvector of matrix A, we need to check if they satisfy the equation Av = λv, where v is the eigenvector and λ is the corresponding eigenvalue.
For v₁ = (1, 0, 4), we have:
A * v₁ = [-7 - √37, -3, 8]
= (-7 - √37) * v₁
So, v₁ is an eigenvector of matrix A with the corresponding eigenvalue λ₁ = -7 - √37.
For v₂ = (1, 0, -4), we have:
A * v₂ = [-7 + √37, -3, -8]
≠ (-7 + √37) * v₂
Therefore, v₂ is not an eigenvector of matrix A.
Hence, the vector v₁ = (1, 0, 4) is the eigenvector of matrix A with the corresponding eigenvalue λ₁ = -7 - √37.
To know more about eigenvalue,
https://brainly.com/question/32587694
#SPJ11
Given the matrix 8 A -6 = 9 12 -5 (a) Two eigenvalues of A are λ = -3, -2. Use the properties of eigenvalues to find the X third eigenvalue of A. (b) Determine all eigenvectors, give the answer in the vector form. (c) Decide if A can be diagonalized. Give reasons. 4 -3
(A) The third eigenvalue (λ₃) can be calculated by subtracting the sum of the given eigenvalues from the trace: λ₃ = 2 - (-5) = 7. (B) By setting x₂ = t (a parameter), we can express the eigenvector as x = [t, (5t)/3]. By setting x₂ = t (a parameter), we can express the eigenvector as x = [t, (11t)/6].
(C) However, since we only have two eigenvectors, we cannot form a basis for the entire vector space, and thus A cannot be diagonalized.
To find the third eigenvalue of matrix A, we can use the property that the sum of eigenvalues is equal to the trace of the matrix. By finding the sum of the given eigenvalues and subtracting it from the trace of A, we can determine the third eigenvalue. Additionally, the eigenvectors of A can be found by solving the system of equations (A - λI)x = 0, where λ is each eigenvalue. Finally, A can be diagonalized if it has a complete set of linearly independent eigenvectors.
(a) The sum of eigenvalues of a matrix is equal to the trace of the matrix. The trace of a matrix is the sum of its diagonal elements. In this case, the trace of matrix A is 8 - 6 = 2. We are given two eigenvalues, λ₁ = -3 and λ₂ = -2. To find the third eigenvalue, we can use the property that the sum of eigenvalues is equal to the trace. So, the sum of the eigenvalues is -3 + (-2) = -5. Therefore, the third eigenvalue (λ₃) can be calculated by subtracting the sum of the given eigenvalues from the trace: λ₃ = 2 - (-5) = 7.
(b) To determine the eigenvectors of matrix A, we need to solve the system of equations (A - λI)x = 0, where λ is each eigenvalue. In this case, we have two eigenvalues, λ₁ = -3 and λ₂ = -2. For each eigenvalue, we substitute it into the equation (A - λI)x = 0 and solve for x. The resulting vectors x will be the corresponding eigenvectors. For λ = -3, we have:
(A - (-3)I)x = 0
(8 - (-3))(x₁) + (-6)(x₂) = 0
11x₁ - 6x₂ = 0
By setting x₂ = t (a parameter), we can express the eigenvector as x = [t, (11t)/6]. Similarly, for λ = -2, we have:
(A - (-2)I)x = 0
(8 - (-2))(x₁) + (-6)(x₂) = 0
10x₁ - 6x₂ = 0
By setting x₂ = t (a parameter), we can express the eigenvector as x = [t, (5t)/3].
(c) A matrix A can be diagonalized if it has a complete set of linearly independent eigenvectors. In this case, if we have three linearly independent eigenvectors corresponding to the eigenvalues -3, -2, and 7, then A can be diagonalized. However, since we only have two eigenvectors, we cannot form a basis for the entire vector space, and thus A cannot be diagonalized.
Learn more about eigenvalue:
https://brainly.com/question/31650198
#SPJ11
Convert; 1/2 i) 5210 to binary number (4mks) ii) 10010002 to a denary number (4mks) 2. Given that A= B = and C = . J Determine a single matrix i. Ax B ii. BX A (4mks) iii. The matrix D such that 3D +C = (4mks) K/ D 5 09:25:43 Undo Save
i. 5210 to binary numberConversion of 5210 to binary numberThe steps for conversion are as follows:Take the decimal number (5210) and divide it by 2.The quotient is 26 and the remainder is 0. Record the remainder. 2 goes into 52, 26 times.Take the quotient from step 1 (26) and divide it by 2.The quotient is 13 and the remainder is 0. Record the remainder. 2 goes into 26, 13 times.Take the quotient from step 2 (13) and divide it by 2.The quotient is 6 and the remainder is 1. Record the remainder. 2 goes into 13, 6 times.Take the quotient from step 3 (6) and divide it by 2.The quotient is 3 and the remainder is 0. Record the remainder. 2 goes into 6, 3 times.Take the quotient from step 4 (3) and divide it by 2.The quotient is 1 and the remainder is 1. Record the remainder. 2 goes into 3, 1 time.Take the quotient from step 5 (1) and divide it by 2.The quotient is 0 and the remainder is 1. Record the remainder. 2 goes into 1, 0 times.Write the remainders from the bottom to the top. The binary number is 1100112. Therefore, 5210 in binary is 1100112.ii. 10010002 to a denary numberConversion of 10010002 to denary numberThe steps for conversion are as follows:Write the binary number with the place value as in the binary number system: 10010002 = 1 × 26 + 0 × 25 + 0 × 24 + 1 × 23 + 0 × 22 + 0 × 21 + 0 × 20.Simplify the above expression: 10010002 = 1 × 64 + 0 × 32 + 0 × 16 + 1 × 8 + 0 × 4 + 0 × 2 + 0 × 1 = 68.Thus, the decimal equivalent of 10010002 is 68.iii. Matrix calculationsGiven that A = B = and C = .To determine the single matrix Ax B we can multiply the matrix A and B. A = B = =C = The matrix D such that 3D +C =K/ D =
Score on last try: 0.75 of 1 pts. See Details for more. > Next question Get a similar question You can retry this question below [infinity] x²+4 Determine whether the integral de is divergent or convergent. x¹ + 7x² + 27 x²+4 fdx Use a comparison of da to for a positive integer p. x47x² + 27 XP 2² +4 2² Hint: For large x the integrand is close to 24+7x² +27 Smallest p= dr b S x² +4 x¹ + 7x² + 27 o Odiverges converges 2² +4 de diverges converges ______ ТР da XP 8 So √₂ 24+ 72²2 2 OF 27 da x1
The task is to determine whether the integral ∫(x²+4)/(x¹ + 7x² + 27) dx is divergent or convergent. We need to compare it to a known convergent or divergent integral using a positive integer p.
To determine the convergence or divergence of the given integral, we can compare it to a known convergent or divergent integral. The suggested comparison is to compare the given integral to ∫(24+7x²+27)/(x²+4) dx.
By analyzing the behavior of the integrand for large values of x, we can observe that the integrand is close to 24+7x²+27. This allows us to make a comparison using the integral ∫(24+7x²+27)/(x²+4) dx.
To evaluate the convergence or divergence of the original integral, we need to find the smallest positive integer p such that the integral ∫(24+7x²+27)/(x²+4) dx converges.
Further details or specific calculations are required to determine the value of p and conclude whether the original integral diverges or converges.
Learn more about divergent here: brainly.com/question/31778047
#SPJ11
Put the matrix 1 1 4 5 2 15 5 0132 B = -1 1 2 2 into reduced row echelon form. (a) The homogeneous system of equations Ba = 0 represents how many equations in how many unknowns? Is there a non-trivial solution? If so, find the general solution of Ba = 0. = (b) Is there a vector bE R4 for which Ba b is inconsistent? Write down such a vector b if one exists and verify that Ba = b is incon- sistent. (c) Write down a vector d E R¹ for which Bad is consistent. Then write down the general solution of Ba = d.
The matrix B given is reduced to its row echelon form by applying elementary row operations. The homogeneous system of equations Ba = 0 represents a system of 2 equations in 4 unknowns.
There exists a non-trivial solution, and the general solution for Ba = 0 is determined. A vector b in R4 is found such that Ba b is inconsistent, demonstrating that no solution exists for this equation.
Additionally, a vector d in R¹ is provided for which Bad is consistent, and the general solution of Ba = d is derived.
To put matrix B = [[1, 1, 4, 5], [2, 15, 5, 132], [-1, 1, 2, 2]] into reduced row echelon form, we will perform row operations to simplify the matrix.
Here are the steps:
Step 1: Swap rows R1 and R2
[[2, 15, 5, 132], [1, 1, 4, 5], [-1, 1, 2, 2]]
Step 2: Multiply R1 by -1/2
[[-1, -7.5, -2.5, -66], [1, 1, 4, 5], [-1, 1, 2, 2]]
Step 3: Add R1 to R2 and R3
[[-1, -7.5, -2.5, -66], [0, -6.5, 1.5, -61], [0, -6.5, 0.5, -64]]
Step 4: Multiply R2 by -1/6.5
[[-1, -7.5, -2.5, -66], [0, 1, -0.2308, 9.3846], [0, -6.5, 0.5, -64]]
Step 5: Add 6.5 times R2 to R3
[[-1, -7.5, -2.5, -66], [0, 1, -0.2308, 9.3846], [0, 0, 0, 0]]
The matrix is now in reduced row echelon form. Let's analyze the results:
(a) The homogeneous system of equations Ba = 0 represents 1 equation in 4 unknowns. Since the last row of the reduced matrix consists of all zeros, the system has a non-trivial solution.
To find the general solution, we express the unknowns in terms of free variables:
x3 = s, x4 = t (where s and t are free variables)
x2 = -0.2308s + 9.3846t
x1 = -7.5s - 2.5t
The general solution is a linear combination of the form:
a = [-7.5s - 2.5t, -0.2308s + 9.3846t, s, t], where s and t can take any real values.
(b) To check if there is a vector bE R^4 for which Ba = b is inconsistent, we need to verify if the augmented matrix [B | b] has a solution other than the trivial solution (all variables equal to zero).
If the last row of the reduced matrix consists of all zeros except for the last column, then the system is inconsistent. In this case, we have:
[[1, 1, 4, 5, b1], [2, 15, 5, 132, b2], [-1, 1, 2, 2, b3]]
Since there is no row of the form [0 0 0 0 | nonzero], it means that for any vector bE R^4, the system Ba = b is consistent.
(c) To find a vector dE R^1 for which Bad is consistent, we can choose a vector that lies in the column space of B. One such vector could be d = [1], which is a 1x1 vector.
The general solution of Ba = d is obtained by adding the particular solution to the homogeneous solution:
Particular solution (Pa):
x3 = 1, x4 = 0
x2 = -0.2308(1) + 9.3846(0) = -0.2308
x1 = -7.5(1) - 2.5(0) = -7.5
Homogeneous solution (Ha):
x3 = s, x4 = t
x2 = -0.2308s + 9.3846t
x1 = -7.5s - 2.5t
General solution (Ga):
[-7.5s - 2.5t - 7.5, -0.2308s + 9.3846t - 0.2308, s + 1, t]
The values in the particular solution are obtained by substituting d = 1 into the general solution.
To learn more about row echelon form visit:
brainly.com/question/30403280
#SPJ11
2x² The curve of has a local maximum and x² - 1 minimum occurring at the following points. Fill in a point in the form (x,y) or n/a if there is no such point. Local Max: type your answer... Local Min: type your answer...
The curve of the function 2x² has a local maximum at (0, 0) and no local minimum.
To find the local maximum and minimum of the function 2x², we need to analyze its first derivative. Let's differentiate 2x² with respect to x:
f'(x) = 4x
The critical points occur when the derivative is equal to zero or undefined. In this case, there are no critical points because the derivative, 4x, is defined for all values of x.
Since there are no critical points, there are no local minimum points either. The curve of the function 2x² only has a local maximum at (0, 0). At x = 0, the function reaches its highest point before decreasing on either side.
In summary, the curve of the function 2x² has a local maximum at (0, 0) and no local minimum. The absence of critical points indicates that the function continuously increases or decreases without any local minimum points.
Learn more about function here:
https://brainly.com/question/18958913
#SPJ11
We wish to sketch the curve 2x² . The x x² - 1 and y intercepts occur at (a, b). Fill in the values of a and b below. a= type your answer... and b= type your answer...
The curve 2x² intersects the x-axis at (a, 0) and the y-axis at (0, b), where a = 0 and b = 0.
To find the x-intercept, we set y = 0 in the equation 2x² and solve for x:
2x² = 0
x² = 0
x = 0
Therefore, the curve intersects the x-axis at (0, 0).
To find the y-intercept, we set x = 0 in the equation 2x² and solve for y:
y = 2(0)²
y = 0
Hence, the curve intersects the y-axis at (0, 0).
In summary, for the curve 2x², the x-intercept occurs at (a, 0) with a value of a = 0, and the y-intercept occurs at (0, b) with a value of b = 0. Both intercepts coincide at the origin (0, 0).
Learn more about equation here:
https://brainly.com/question/20067450
#SPJ11
Draw a direction field for the differential equation y' = −y(7 — y). Based on the direction field, determine the behavior of y as t → [infinity]. If this behavior depends on the initial value of y at t = 0, describe this dependency. The two equilibrium solutions are y(t): and y(t) = Solutions with initial values greater than 7
The behavior of y as t → ∞ depends on the initial value of y at t = 0. The two equilibrium solutions are y(t) = 0 and y(t) = 7.
The differential equation is y' = -y(7 - y). The following is the direction field for the differential equation y' = -y(7 - y)
As seen in the direction field above, we can see that the solutions approach the equilibrium solutions y=0 and y=7
as t → ∞.
Also, the solutions do not intersect with each other. These facts indicate that the solution curves are unique, and we can draw an accurate direction field. So, the behavior of y as t → ∞ depends on the initial value of y at t = 0.
The two equilibrium solutions are y(t) = 0 and y(t) = 7. Solutions with initial values greater than 7 have the property that y(t) → 7 as t → ∞, whereas solutions with initial values less than 7 have the property that y(t) → 0 as t → ∞.
Thus, the behavior of the solution as t → ∞ depends on the initial value of y at t = 0. From the direction field of the differential equation y' = −y(7 — y), it can be concluded that the solutions approach the equilibrium solutions y=0 and y=7 as t → ∞.
The behavior of y as t → ∞ depends on the initial value of y at t = 0. The two equilibrium solutions are y(t) = 0 and y(t) = 7. Solutions with initial values greater than 7 have the property that y(t) → 7 as t → ∞, whereas solutions with initial values less than 7 have the property that y(t) → 0 as t → ∞. The solution curves are unique, and we can draw an accurate direction field.
To know more about the equilibrium solutions, visit:
brainly.com/question/32806628
#SPJ11
5 The amount of milk a baby monkey needs each week increases in a pattern.
The table below shows the first 4 weeks.
Milk (ml)
160.0
Weeks
Week 1
Week 2
Week 3
Week 4
172.5
185.0
197.5
(a) How much does the amount of milk needed increase by each week?
Answer: It increases by 12.5 mL per week
Step-by-step explanation:
Let S = A1 U A2 U ... U Am, where events A1, A2, ..., Am are mutually exclusive and exhaustive. (a) If P(A1) = P(A2) = ... = P(Am), show that P(Aj) = 1/m, i = 1, 2, ...,m. (b) If A = ALUA2U... U An, where h
Since We have A1, A2, ..., Am are mutually exclusive and exhaustive, we get P(A) = (|A1| + |A2| + ... + |An| - |A1 n A2| - |A1 n A3| - ... - |A(n-1) n An| + |A1 n A2 n A3| + ... + (-1)^(n+1) |A1 n A2 n ... n An|) / |S|.
If P(A1) = P(A2) = ... = P(Am), then it implies that
P(A1) = P(A2) = ... = P(Am) = 1/m
To show that
P(Aj) = 1/m, i = 1, 2, ...,m;
we will have to use the following formula:
Probability of an event (P(A)) = number of outcomes in A / number of outcomes in S.
So, P(Aj) = number of outcomes in Aj / number of outcomes in S.
Here, since events A1, A2, ..., Am are mutually exclusive and exhaustive, we can say that all their outcomes are unique and all the outcomes together form the whole sample space.
So, the number of outcomes in S = number of outcomes in A1 + number of outcomes in A2 + ... + number of outcomes in Am= |A1| + |A2| + ... + |Am|
So, we can use P(Aj) = number of outcomes in Aj / number of outcomes in
S= |Aj| / (|A1| + |A2| + ... + |Am|)
And since P(A1) = P(A2) = ... = P(Am) = 1/m,
we have P(Aj) = 1/m.
If A = A1 U A2 U ... U An, where A1, A2, ..., An are not necessarily mutually exclusive, then we can use the following formula:
Probability of an event (P(A)) = number of outcomes in A / number of outcomes in S.
So, P(A) = number of outcomes in A / number of outcomes in S.
Here, since A1, A2, ..., An are not necessarily mutually exclusive, some of their outcomes can be common. But we can still count them only once in the numerator of the formula above.
This is because they are only one outcome of the event A.
So, the number of outcomes in A = |A1| + |A2| + ... + |An| - |A1 n A2| - |A1 n A3| - ... - |A(n-1) n An| + |A1 n A2 n A3| + ... + (-1)^(n+1) |A1 n A2 n ... n An|.
And since the outcomes in A1 n A2, A1 n A3, ..., A(n-1) n An, A1 n A2 n A3, ..., A1 n A2 n ... n An are counted multiple times in the sum above, we subtract them to avoid double-counting.
We add back the ones that are counted multiple times in the subtraction, and so on, until we reach the last one, which is alternately added and subtracted.
To know more about mutually visit :
brainly.com/question/32545393
#SPJ11
A manager receives a forecast for next year. Demand is projected to be 750 units for the first half of the year and 1200 units for the second half. The monthly holding cost is $1 per unit, and it costs an estimated $50 to process an order. (a) Assuming that monthly demand will be level during each of the six-month periods covered by the forecast (e.g., 100 per month for each of the first six months), determine an order size that will minimize the sum of ordering and carrying costs for each of the six-month periods. (1 point) (b) If the vendor is willing to offer a discount of $5 per order for ordering in multiple of 50 units (e.g., 50, 100, 150), would you advise the manager to take advantage of the offer in either period? If so, what order size would you recommend?
For the first six-month period, the order size remains at 273 units, while for the second six-month period, it is recommended to increase the order size to 350 units to take advantage of the discount offer.
(a) To determine the order size that will minimize the sum of ordering and carrying costs for each of the six-month periods, we need to calculate the Economic Order Quantity (EOQ) for each period.
The EOQ formula is given by:
EOQ = √[(2DS) / H]
Where:
D = Demand per period
S = Ordering cost per order
H = Holding cost per unit per period
For the first six-month period with a demand of 750 units, the EOQ is calculated as follows:
EOQ1 = √[(2 * 750 * $50) / $1] = √[75000] ≈ 273 units
For the second six-month period with a demand of 1200 units, the EOQ is calculated as follows:
EOQ2 = √[(2 * 1200 * $50) / $1] = √[120000] ≈ 346 units
Therefore, the recommended order size for the first six-month period is 273 units, and for the second six-month period is 346 units.
(b) If the vendor offers a discount of $5 per order for ordering in multiples of 50 units, we need to evaluate whether taking advantage of this offer would be beneficial.
For the first six-month period, the order size of 273 units is not a multiple of 50 units, so the discount does not apply. Therefore, there is no advantage in ordering in multiples of 50 units in this period.
For the second six-month period, the order size of 346 units is a multiple of 50 units (346 = 6 * 50 + 46). Since the discount is $5 per order, it would be beneficial to take advantage of the offer. The recommended order size in this period would be 350 units (7 * 50) to maximize the discount.
Learn more about Economic Order Quantity here:
https://brainly.com/question/28347878
#SPJ11
In 2009, one of the U.S. government's bailout packages was $700 billion when gold was worth $800 per ounce ($28.20 per gram).
a. Calculate the mass in grams of $700 billion worth of gold.
b. It this amount of gold were in the shape of a cube, how long would each of its
A)the mass of $700 billion worth of gold is approximately 24,822,695,035.5 grams. B)The actual length will depend on the exact density of gold and the accuracy of the provided values.
A) In order to calculate the mass of $700 billion worth of gold, we need to convert the dollar value into grams.
To do this, we first need to determine the price of gold per gram. Given that gold was worth $800 per ounce ($28.20 per gram), we can use this conversion factor to calculate the mass.
$800 per ounce is equivalent to $28.20 per gram. Therefore, 1 gram of gold is worth $28.20.
Next, we can divide the total dollar value ($700 billion) by the value of 1 gram of gold ($28.20) to find the mass in grams.
$700 billion / $28.20 per gram = 24,822,695,035.5 grams
So, the mass of $700 billion worth of gold is approximately 24,822,695,035.5 grams.
B)Moving on to the second part of the question, if this amount of gold were in the shape of a cube, we need to calculate the length of each side of the cube.
To find the length, we can use the formula for the volume of a cube, which is side length cubed. Since we know the mass of the gold (24,822,695,035.5 grams), we need to calculate the side length.
Let's assume the density of gold is 19.32 grams per cubic centimeter (g/cm³). By dividing the mass of the gold (24,822,695,035.5 grams) by the density (19.32 g/cm³), we can find the volume of the gold in cubic centimeters.
Volume = Mass / Density = 24,822,695,035.5 g / 19.32 g/cm³
By solving this equation, we can find the volume of the gold.
Finally, we can use the volume of the gold to calculate the length of each side of the cube by taking the cube root of the volume.
This will give us the length of each side of the cube formed by the given amount of gold.
The actual length will depend on the exact density of gold and the accuracy of the provided values. The above calculation is an example based on the given information.
Know more about density here,
https://brainly.com/question/29775886
#SPJ11
Show that the equation f(x)=x-si sin(x)-=0 has a root in the Fixed-point method to find the root wit three iterations and four digits accuracy where P HI 2 2- Fined the error bound if we approximate the root Pby Po 3- Determine the number of iterations needed to achieve an approximation to the solution with accuracy 10-3 Question 3. [3 Marks] 1- Find the numerical solution to the following system using Jacobi methods for two iterations and five digits (0) accuracy with choosing X=(0,0,0) as the initial approximation. 20x₁+x₂-2x, = 17 3x +20x₂-x₂=-18 2x-3x₂ + 20x, = 25 (1) - 2- Estimate the error using the formula where X=(1,-1,1) is the exact solution. X 3
The first part of the question involves finding a root of the equation using the fixed-point iteration method. With three iterations and four digits accuracy, we can approximate the root.
In the first part, the fixed-point iteration method is applied to find a root of the equation f(x) = x - sin(sin(x)) = 0. With three iterations and four digits accuracy, the iterative process is performed to approximate the root. The error bound can be determined by choosing an initial approximation, Po, and calculating the difference between the actual root, P, and the approximation.
In the second part, the Jacobi method is used to solve a system of equations. The system is given as three equations with three variables. With two iterations and five digits accuracy, the Jacobi method is applied with an initial approximation of X = (0, 0, 0). The iterative process is performed to approximate the numerical solution to the system. The error can be estimated by comparing the obtained approximation with the exact solution, X = (1, -1, 1), using a formula for error estimation.
Overall, the question involves applying numerical methods such as fixed-point iteration and Jacobi method to approximate roots and solutions to equations and systems of equations. Error estimation is also an important aspect to assess the accuracy of the approximations.
Learn more about iterations here:
https://brainly.com/question/30941646
#SPJ11
If y varies inversely as the square of x, and y=7/4 when x=1 find y when x=3
When x = 3, the value of y is 7/36.
To find the value of y when x = 3, we can use the inverse variation formula. Given that y varies inversely as the square of x, we can express this relationship as y = k/[tex]x^2[/tex], where k is the constant of variation.
We are given that when x = 1, y = 7/4. Plugging these values into the equation, we have 7/4 = k/([tex]1^2[/tex]), which simplifies to 7/4 = k.
Now we can use this value of k to find y when x = 3. Substituting x = 3 and k = 7/4 into the inverse variation formula, we get y = (7/4)/([tex]3^2[/tex]), which simplifies to y = (7/4)/9.
To further simplify, we can multiply the numerator and denominator of (7/4) by 1/9, which gives y = 7/36.
Therefore, when x = 3, the value of y is 7/36.
For more such answers on Constant of variation
https://brainly.com/question/25215474
#SPJ8
Əf of Find and dx dy 3x f(x, y) = 10y Əf || 12 for the following function. 9y 2x
Given function is f(x, y) = [tex]10y/(9y^2 + 4x^2)[/tex] for the element.
Given, ||f|| ≤ 12 for the given function
A function in mathematics is a relation that links every element from one set, known as the domain, to a single element from another set, known as the codomain. It is represented by a rule or formula that specifies how the inputs and outputs relate to one another.
A function takes an input, transforms or performs an action on it, and then outputs the result. In equations, functions are commonly written as f(x) or g(x), where x is the input variable. In mathematical analysis, modelling real-world phenomena, equation solving, and investigating the behaviour of numbers and systems, functions play a key role. They are essential to the study of algebra, calculus, and other areas of mathematics.
To find: [tex]Əf/Əx and Əf/Əy[/tex]
Using quotient rule: [tex]Əf/Əx = [10y * (-8x)]/[(9y² + 4x²)²]Əf/Əy = [(10 * 9y²) - (20xy)]/[(9y² + 4x²)²]Əf/Əx = (-80xy)/[(9y² + 4x²)²]Əf/Əy = [(90y² - 20x²y)]/[(9y² + 4x²)²][/tex]
Learn more about function here:
https://brainly.com/question/30721594
#SPJ11
