Imagine that you’re observing a collision. which action would allow you to determine whether the collision is inelastic?

the answer is the mantle.

A hydrogen atom in the n=7 state decays to the n=4 state. The wavelength of the photon that the hydrogen atom emits is 4592.59nm.

The Energy of photon is the energy possessed by a photon when it moves from a high energy level to a low energy level. It emits a photon of a certain wavelength. The following relation can be used to find out the relation between the energy levels and the energy possessed:

E = 13.6 × Z² (1/n₂² - 1/n₁²) eV

where, n₁ is the initial energy level i.e. n₁ =7

            n₂ is the higher energy level i.e. n₂ = 4

            E is the energy possessed

            Z is the atomic number, Z = 1 for H-atom

Subsituting in above equation,

E = 13.6 (1/16 - 1/49) eV

E = 0.27 eV

We know that,

E = hc / λ  

where, h is Planck constant

           c is speed of light

            λ is wavelength

On subsituting,

0.27 eV = 1240/ λ

⇒ λ = 4592.59 nm

Hence, the wavelength of photon emitted by Hydrogen atom is 4592.59nm.

Learn more about Energy of Photon here, https://brainly.com/question/2393994

#SPJ4

Explanation:

answers to 1 and 2 above/below respectively but can't do 3 because I don't know what graph you're talking about

Out of a 1. 0-μf capacitor rated at 250 v or a 470-pf capacitor rated at 3 kV , a 1. 0-μf capacitor rated at 250 v will have more capacitance than the other one .

A capacitor is a two-terminal electrical device that possesses the ability to store energy in the form of an electric charge. It consists of two electrical conductors that are separated by a distance. The space between the conductors may be filled by vacuum or with an insulating material known as a dielectric.

Work has to be done to transfer charges onto a conductor, against the force of repulsion from the already existing charges on it. This work is stored as a potential energy of the electric field of the conductor.

Energy stored in a capacitor1 = 1/2 * C1 * [tex]V1^{2}[/tex]

                                                 = 1/2 * ( 1 * [tex]10^{-6}[/tex]) * 250

                                                 = 31250 * [tex]10^{-6}[/tex] J

Energy stored in a capacitor2 = 1/2 * C2 * [tex]V2^{2}[/tex]

                                                   = 1/2 * ( 470 * [tex]10^{-12}[/tex] ) * [tex](3000)^{2}[/tex]

                                                   = 2115 * [tex]10^{-6}[/tex] J

capacitor 1 can store more energy  

To learn more about capacitor here        

https://brainly.com/question/17176550?referrer=searchResults

#SPJ4                                

Extrasolar planet mass can be ten times as that of earth and it's size can be twice as that of earth.

GJ 504b is the planet having lowest mass detected around sun.

HAT-O-67b is the planet having the highest mass with diameter twice as that of Jupiter.

Results show that there are more small planets than the large ones which indicates that small planets are dominant in the galaxy.

Earth-sized planets are common in the galaxy.

Learn more about Solar system here, https://brainly.com/question/23169135

#SPJ4

Dr. Berenson's study showed that when obese children reach adulthood they are 8 times more likely to develop high blood pressure than healthy weight children.

Dr. Berenson (September 19, 1922 – November 22, 2018) was an American cardiologist, heart researcher, and public health expert who specialised in determining the root causes of cardiac conditions. According to Dr. Berenson's foundational research, childhood routines and habits are the root cause of adult heart disease. He also found that compared to people with no cardiovascular risk factors, those with three or four cardiovascular risk factors had atherosclerosis that was noticeably more evident. Dr. Berenson began teaching at Tulane University after being released from the U.S. Navy in 1948. He started a two-year research fellowship at the University of Chicago in 1952, where Dr. Berenson worked on rheumatic fever investigations with Albert Dorfman, the department's chief.

According to dr. berenson's study, when obese children reach adulthood, how many times more likely are they have high-blood pressure?

Learn more about dr. Berenson here:

https://brainly.com/question/21824136

#SPJ4

Answer:

oxygen expanding unjhfyysue hjdbdhdjjhd

Answer:

32 psi to 35 psi.

Explanation:

Normal tire pressure is usually between 32~40 psi(pounds per square inch) when they are cold. So make sure you check your tire pressure after a long stay and usually, you can do it in the early morning.

Answer:

[tex] \boxed{\sf54 \: kobo}[/tex]

Explanation:

Energy = Power × Time

Energy = 900× 4 ×5 = 18000 wh

Energy = 18000 wh = 18 kwh

Cost of 1 unit electricity = 3 kobo

cost of 18 unit electricity= 18 × 3 = 54 kobo

Answer:

54 Kobo

Explanation:

Units of electricity are measured in kilowatt hours (kWh).

Given information:

Convert the wattage of the electric iron from watts to kilowatts.

1000 watts (W) = 1 kilowatt (kW)

⇒ 900 watts = 1 ÷ 1000 = 0.9 kilowatts

This means that the power consumption of the electric iron is 0.9 kW per hour of use.

Total hours spent pressing clothes:

= 4 hours per week for 5 weeks

= 4 × 5

= 20 hours

Total power consumption:

= number of kW × number of hours

= 0.9 × 20

= 18 kWh

To find the total cost, multiply the total kWh by the cost per kWh:

⇒ Cost = 18 × 3 = 54 Kobo

A cardiac pacemaker can be affected by a static magnetic field as small as 1. 7 mt. pacemaker wearer comes to a long, straight wire carrying 28 amperes.

A pacemaker is a device that regulates an unsteady heartbeat. A pacemaker is inserted into one or more cardiac chambers using flexible, insulated wires called leads. The electrical pulses needed to change the heart rate are delivered by these lines. Some of the most recent pacemakers don't need leads.

The risk of problems is often quite low while having a pacemaker put. The primary worry is that the pacemaker will no longer be able to regulate the heartbeat due to a malfunction or a wire that has moved out of place. The average patient lived 101.9 months (or 8.5 years) after having a pacemaker implanted; at 5, 10, 15, and 20 years later, 65.6%, 44.8%, 30.8%, and 21.4% of patients were still living, respectively.

To learn more about pacemakers please visit -
https://brainly.com/question/3063545
#SPJ4

The closest distance peacemaker come to is r=3mm.

Given data:-

B=1.7mt.

I=28A.

by using the equation B=(μ₀I)/2πr

                                     r=μ₀I/2πB

                                     r=[tex]\frac{4\pi *10^{-7} Tm/A *28A}{2\pi (0.0017T)}[/tex]

                                     r=32*[tex]10^{-4}[/tex]m

                                     r=3.2mm.

 thus from the above conclusion we can say that when magnetic field is    1.7mt and current =28A then pacemaker can come close r=3.2mm.

Learn more about the magnetic field and current here:-https://brainly.com/question/1594186

#SPJ4

Answer:

Explanation:

Formula

Electric Force formula

F = k * q1 * q2 / r^2

Gravitation Force Formula

F  = G * m1 * m2 / r^2

Givens

k = 8.99 * 10^9 N m^2/C^2

G = 6.67 * 10^-11  N m^2 /kg^2

Solutions

Fe = 8.99 * 10^9 * 1.6 * 10^-19 ^2/ 8.4 * 10^-11

The force = the electric force constant * the charge of the proton*charge  electron/ distance apart in meters. It looks small but actually it is quite large in comparison to the Gravitational Force

Fe = 3.2 * 10^-8 (Answer First Box)

Fg = 6.67 * 10^- 11 * 9.11*10^-31 * 1.67*10^-27 / 8.4 * 10^-11

The gravitational Force is very small. Just look at the powers which come to 10^-68 - -22 = - 46 which is about 6 times smaller than the electric force.

Fg = 1.44 * 10^-47 (Answer Second Box)

Answer:

See below

Explanation:

X component = 120 * cos 35° =  98.298 m/s

Y component = 120 * sin 35° = 68.829 m/s

Any object launched into space with only gravity acting on it is referred to as a projectile. Gravity is the main force affecting a projectile. The x and y components of the velocity vector are 98.298 m/s and 68.829 m/s.

When a particle is thrown obliquely close to the Earth's surface, it travels along a curving route while experiencing constant acceleration. Always pointing in the direction of the Earth's center is this curving path. Such a particle's motion is referred to as projectile motion, and its trajectory is known as the projectile's trajectory.

The components of the projectile are:

X component = 120 × cos 35° =  98.298 m/s

Y component = 120 × sin 35° = 68.829 m/s

To know more about projectile, visit;

https://brainly.com/question/29545516

#SPJ7

The answer is 12,500 cm³.

First, let's find the volume in m³.

Volume = Mass ÷ Density

Now, to convert from m³ to cm³ :

m³ × 10⁶ = cm³

Answer:

The answer is (d) is totally reflected

Explanation:

Using the total internal reflection concept.

This concept state that:

"If the angle of incidence is greater than the critical angle then the light will not refract but it will reflect back totally"

Using the above statement, as incident angle is 42 degree and critical angle is 41 degree it means incident angle is greater than the critical angle. Therefore, light will not refract but it will totally reflected.

To learn more about current and voltage visit:

https://brainly.com/question/10254698

#SPJ4

The answer is heat radiates at a rate of 160w.

What is emissivity?

A substance's emissivity is a measure of how well it reflects heat radiation from its surface. Infrared radiation, which cannot be seen by human eyes, as well as visible radiation (light) are both examples of thermal radiation, which is electromagnetic radiation. The Stefan-Boltzmann law defines emissivity as the quantitative ratio of a surface's thermal radiation to that of an ideal black surface at the same temperature. The ratio is in the range between 0 and 1.

what is energy radiation?

The ability of a substance to reflect heat radiation from its surface is measured by its emissivity. The material's surface emissivity and the temperature difference between the chip surface and the surrounding air are two factors that affect power dissipation in the form of radiation.

To learn more about emissivity :

https://brainly.com/question/10283285

#SPJ4

17.90 KJ of energy must be added to 69. 0 grams of water to change the temperature from 33°C to 95°C

Specific heat, the quantity of heat required to raise the temperature of one gram of a substance by one Celsius degree. The units of specific heat are usually calories or joules per gram per Celsius degree.

Heat added = H = mc(ΔT )

where,

H = heat

m = mass of water = 69 g

c = specific heat of water = 4.184 J/g/°C

ΔT = change in temperature

H = 69 * 4.184 * ( 95 - 33 )

H   = 17899.152 J

     = 17.90 KJ

To learn more about specific heat here

https://brainly.com/question/21041726

#SPJ4

If the electric potential at a point in space is zero, then the electric field at that point must be zero.

To find the answer, we have to know about the electric field.

                       [tex]E=\frac{V}{L}[/tex]

Thus, we can conclude that, If the electric potential at a point in space is zero, then the electric field at that point must be zero.

Learn more about the electric field here:

https://brainly.com/question/27752270

#SPJ4

117 m/sec is the speed of a transverse wave in a rope of length 3. 1 m and mass 86 g under a tension of 380 n.

The wave speed v is given by

v= √τ/μ

​where τ is the tension in the rope and μ is the linear mass density of the rope.

The linear mass density is the mass per unit length of rope :

μ= m / L = (0.086 kg)/(3.1 m)=0.0277 kg/m.

v= [tex]\sqrt{ \frac{380 N}{0.0277 kg/m}}[/tex]  = 117.125 m/sec (approx. 117 m/sec

In physics, a transverse wave is a wave whose oscillations are perpendicular to the direction of the wave's advance. This is in contrast to a longitudinal wave which travels in the direction of its oscillations. Water waves are an example of transverse wave.

Transverse waves commonly occur in elastic solids due to the shear stress generated; the oscillations in this case are the displacement of the solid particles away from their relaxed position, in directions perpendicular to the propagation of the wave. These displacements correspond to a local shear deformation of the material. Hence a transverse wave of this nature is called a shear wave. Since fluids cannot resist shear forces while at rest, propagation of transverse waves inside the bulk of fluids is not possible.

Learn more about Transverse waves here : https://brainly.com/question/13761336

#SPJ4

A film of soapy water (n = 1. 33) on top of a plastic cutting board (n > 1. 33) has a thickness of 147 nm. The color that is most strongly reflected if it is illuminated perpendicular to its surface is 294nm.

When the light is reflected it experiences a half of phase change. Then, the ray will be refracted by travelling through the soapy water down due to the refractive index. It will hit the second boundary which is plastic but light does not pass through the plastic. This will again reflect with again half of a phase change.

So, the formula used is:

2t = λ / 2 +  λ / 2

Given,

refractive index of soap = 1.33

refractive index of air = 1

The relation between the thickness of the board and the wavelength used is as follows:

2t = λ / 2 +  λ / 2

where, t is the thickness

           λ is wavelength

On solving,

2t =  λ

On substituting in above equation,

2(147) =  λ

λ = 294nm

The color that is most strongly reflected if it is illuminated perpendicular to its surface is 294nm.

Learn more about refractive index here, https://brainly.com/question/23750645

#SPJ4

Answer:

ig d. transmits only green light.....

The Sun's apparent yearly path across planet Earth's sky against the background stars wouldn't be described as the celestial equator.

A solar system can be defined as a collection of the outer and inner planetary (astronomical) bodies alongside the Moon that are in orbit around the Sun, in slightly elliptical orbits.  

Basically, there are nine (9) planets in the solar system and these include;

Based on astronomical records and information, we can infer and logically deduce that the Sun's apparent yearly path across planet Earth's sky against the background stars wouldn't be described as the celestial equator.

Read more on the solar system here: brainly.com/question/1286910

#SPJ1

There will be no heat transmission, and the system's work is 25.27 Kj.

The calculation for total heat transfer and work production:

Provided,

The mass of r-134a = 0.7 kg

Initial pressure of the system, P₁ = 800 kpa

Initial temperature of r-134a, T₁ = 50°C = 273+ 50 = 323 K

Final pressure of the system, P₂ = 140 kpa

From the superheated refrigerant r-134a

P₁ = 800 kpa & T₁ = 50°C

the internal energy, u₁ = 263.87 Kj/kg &

the entropy, s₁ = 0.9803 Kj/kg .K

There won't be any heat transmission because the process is isentropic.

So, Q = 0 KJ

Due to the isentropic nature of the operation, the ultimate entropy is determined by

s₂ = s₁ = 0.9803 Kj/kg .K

From the r-134a superheated refrigerant

at P₂ = 140 kpa & entropy s₂ = 0.9803 Kj/kg .K

the internal energy,u₂ = 227.77 K/kg

The work on the system is provided by

W = m x (u₂-u₁)

W = 0.7 x(227.77 - 263.87)

W = 0.7 x (-36.1)

W = -25.27 KJ

A negative number means the system is doing the task.

As a result, there won't be any heat transfer, and the system will only have used 25.27 KJ of energy.

Learn more about the work here:

https://brainly.com/question/20309171

#SPJ4

Answer:

Odd and even

Explanation:

Odd and even numbers have no common elements

The voltage drop across an inductor in a circuit with a dc voltage source at time>> 5*time-constant is more than as compared to first case because the voltage across the inductor is proportional to the rate of change of current which is a maximum at the start when the current and the voltage across the resistor are zero.

As time progresses the current increases at a slower rate as does the voltage across the resistor but the voltage across the inductor decreases.

The voltage drop is proportional to the current, which is the rate-change of the charge. Inductors: V = L (DI/Dt). The voltage drop across the inductor is proportional to the rate-change of the current.

The formula which calculates the inductor voltage is

V= Ldi/dt,

where,

V is the voltage across the inductor,

L is the inductance of the inductor,

di/dt is the derivative of the current flowing across the inductor.

Thus from the above conclusion we can say that The voltage drop across an inductor in a circuit with a dc voltage source at time>> 5*time-constant is more than as compared to first case because the voltage across the inductor is proportional to the rate of change of current which is a maximum at the start when the current and the voltage across the resistor are zero.

Learn more about Voltage drop from here: https://brainly.com/question/1176850

#SPJ4

Potential and kinetic energy are at play when we talk about Newton's second law of motion through the various positions in relation to the bodies involved.

This law states that force is equal to the rate of change of momentum and is denoted as F = mv where m is mass and v is velocity.

Potential energy is the energy is possessed by a body by virtue of its position while kinetic energy is possessed by a body by virtue of its motion. Both forms of energy are influenced by forces and are equal to the total momentum.

Read more about Newton's second law of motion here https://brainly.com/question/2009830

#SPJ1

At high density of the molecules tends to be greater pressure that of molecules and at low density of the molecules tends to be less pressure that of molecules.

It is given that the molecules are in the ideal gas.

It is required to find the greatest effect of the finite size of molecules on the ideal gas law.

According to ideal gas law, at high density of the molecules tends to be greater pressure that of molecules and at low density of the molecules tends to be less pressure that of molecules.

From ideal gas equation,

PV = nRT

Where,

P - Pressure of the molecules

V - Volume of the molecules

n - Total amount of substance

R - Gas constant

T - Temperature of the molecules

As shown from above equation, both the quantities are directly proportional to each other and also ideal gas law follows the kinetic molecular theory  where it suggests that the volume of the molecules have negligible point.

Thus, at high density of the molecules tends to be greater pressure that of molecules and at low density of the molecules tends to be less pressure that of molecules.

Learn more about the ideal gas here:

https://brainly.com/question/8711877

#SPJ4

The answer is B.

We use the spring constant in Hooke's Law, which is : F = -kx

It can be rearranged so it is equal to the constant :

k = F ÷ x

Common units of Force (F) : N, kg m/s²

Common units of displacement (x) : cm, m, km

The dimensionally correct unit from the given options is :

⇒ N/km

Answer:

Explanation:

MLT^-2

.....

The electron in a ground-state H atom absorbs a photon of wavelength 97. 25 nm.  Energy level till where the electron move is 4

Rydberg's equation is formula which signifies relation of wavelength of incident photon and the energy level.

Rydberg's equation is used to find out the relation between the wavelength and the Energy Levels:

1/λ = RZ² (1/n₁² - 1/n₂²)

where, λ is wavelength = 97.25 nm

           R is the Rydberg constant = 1.0967 × 10⁷ m

           n₁ is the initial energy level i.e. the Ground state, n₁  = 1

           n₂ is the higher energy level

On substitution of the above value:

1/97.25 × 10⁻⁹ = 1.0967 × 10⁷ ( 1 -  1/n₂²)

On solving,

⇒ n₂ = 4

Hence, the higher energy level is 4

Learn more about Energy Level here, https://brainly.com/question/17396431

#SPJ4