in the lab a substance is studied and the following observaetions are made, it reacts with bromine to give a brittle white soli

The amount of heat energy released when 1.52 mole of hydrogen peroxide, H₂O₂ decomposes is -297.92 KJ

First, we shall obtain the write the equation for the decomposition of hydrogen peroxide, H₂O₂. Details below:

2H₂O₂ -> 2H₂O + O₂  ΔH = -196 KJ

Finally, we shall determine the heat energy released when 11.52 moles of hydrogen peroxide, H₂O₂ decomposes. Details below:

H₂O₂ -> 2H₂O + O₂  ΔH = -196 KJ

From the balanced equation above,

When 1 mole of H₂O₂ decomposed, -196 KJ of heat energy were released.

Therefore,

When 1.52 mole of H₂O₂ will decompose to release = 1.52 × -196 = -297.92 KJ

Thus, we can conclude that the heat energy released from the decomposition reaction is -297.92 KJ

Learn more about heat energy:

https://brainly.com/question/31429264

#SPJ4

According to the mentioned experimental procedure, an enzyme solution of alkaline phosphatase in 50 mM Tris-HCl buffer at a particular pH is used to measure the organophosphate content in the horn sample.

The pH of the buffer is altered to maximize enzyme activity. The enzyme solution is incubated with the horn sample, and then enzyme activity is determined using the appropriate technique. The concentration of organophosphates in the horn sample can be determined using a calibration curve or a standard reference based on the detected enzyme activity. The lack of precise information regarding pH, incubation duration, and measurement technique makes it challenging to fully understand and mimic the experimental process.

Learn more about pH, here:

https://brainly.com/question/2288405

#SPJ4

The following is how the ion product (Q) is calculated:

For CaSO4:

For MgSO4, Q = [Ca2+][SO42-]: Q = [Mg2+][SO42-] At 25°C, CaSO4 has a solubility product (Ksp) of 2.4 x 10-5, while MgSO4 has a Ksp of 2.50.

We are given the disintegration conditions for CaSO4 and MgSO4:

CaSO4(s) → Ca2+(aq) + SO42-(aq)

MgSO4(s) → Mg2+(aq) + SO42-(aq)

We can utilize these conditions to ascertain the particle convergences of Ca2+ and Mg2+ in the water test.

To ascertain the particle groupings of Ca2+ and SO42-, we really want to know the worth of Keq for every disintegration response. The formula for Keq is as follows:

For CaSO4: For MgSO4, Keq is equal to [Ca2+]SO42-/[CaSO4]. Keq = [Mg2+][SO42-]/[MgSO4] Since the Keq value for either reaction is unknown, we are unable to determine the ion concentrations of Ca2+ and Mg2+. As a result, we are unable to ascertain whether CaSO4 or MgSO4 will precipitate in this water sample.

The limit at which a substance—the solute—can respond to another substance—the dissolvable—is referred to as its dissolvability in science.The opposite property is insolubility, or the solute's inability to form a solution. The concentration of a solute in a saturated solution—one in which no more solute can be dissolved—is typically used to measure a substance's solubility in a particular solvent.

As of now, the two substances are supposed to be at the dissolvability balance. There may not be such a limit for some solvents and solutes; in this case, they are referred to as "miscible in all proportions" or simply "miscible." The solute can be a strong, a fluid, or a gas, while the dissolvable is typically strong or fluid.

Learn more about solubility here:

brainly.com/question/31493083

#SPJ4

The molecular geometry expected around the indicated carbon atom in cyclohexene is trigonal planar.

The carbon atom represented in cyclohexene refers to the sp2 hybridized carbon atom in the double bond. This carbon atom's molecular shape is trigonal planar.

The three sigma bonds generated by the sp2 hybridized carbon atom in cyclohexene are in the same plane and have bond angles of about 120 degrees.

The double bond is formed when the carbon atom's remaining p orbital creates a pi bond with another carbon atom.

Thus in cyclohexene, the molecular shape is trigonal planar around the specified carbon atom.

For more details regarding cyclohexene, visit:

https://brainly.com/question/32998336

#SPJ4

Amount of heat released from 30 g of steam at 100.0 °C as it cools to 37 °C is 24.4 kJ (7.29 kJ for water and 2.06 kJ for water vapor).

Steam can cause more severe burns than water, even if both are at the same temperature. Calculate the amount of heat released from 30 g of steam at 100.0 °C as it cools to 37 °C (body temperature), and the amount of heat released from 30 g of cc −1.

The heat content of 30 g of water at 100 °C cooling to 37 °C is 7.29 kJ.

The heat released when 30 g of water vapor at 100 °C cools to 37 °C is 2.06 kJ.

The amount of heat released from 30 g of steam at 100 °C as it cools to 37 °C is 24.4 kJ.

Steam can cause more severe burns than water because steam has a high latent heat of vaporization.

The amount of heat released from 30 g of steam at 100.0 °C as it cools to 37 °C (body temperature) can be calculated as follows:

The specific heat of steam at 100 °C is 2.080 J/(g K).

Heat content of steam at 100 °C = 30 g × 2.080 J/(g K) × (100 - 0) K

= 6240 J or 6.24 kJ.

Heat content of steam at 37 °C = 30 g × 2.080 J/(g K) × (100 - 37) K

= 4428 J or 4.43 kJ.

Heat released = 6.24 - 4.43

= 1.81 kJ or 1810 J.

Amount of heat released from 30 g of steam at 100.0 °C as it cools to 37 °C is 24.4 kJ (7.29 kJ for water and 2.06 kJ for water vapor).

To know more about heat visit:

https://brainly.com/question/13860901

#SPJ11

The mode of the laser cavity is approximately 108.70.

To determine the mode of a laser cavity, we can use the formula:

Mode = L / (2 × d)

Where:

L is the length of the cavity

d is the wavelength of the emitted light

Given:

Length of the cavity (L) = 15 cm

Length of the cavity (L)  = 0.15 m

Wavelength (d) = 693 nm

Wavelength (d) = 693 × 10⁻⁹ m

Plugging the values into the formula:

Mode = 0.15 m / (2 × 693 × 10⁻⁹ m)

Mode = 108.70

The mode of the laser cavity is approximately 108.70.

Learn more about laser here:

https://brainly.com/question/27853311

#SPJ 4

Answer:

The safe way to put out flames is to slide the pan's lid

Explanation:

To put out the flames, get the pan's lid and'slide' it over the highest point of the pan. Alternately, use a sheet of parchment paper and'slide' it on top of the flaming pan. For the hob to cease offering heat, turn it off. Wait until the pan has totally cooled before lifting it or taking off the cover.

Read more about gease fire:

https://brainly.in/question/31250028

Therefore, the final concentration of salt (NaCl) is 25 mM.

The goal in the given scenario is to remove as much NaCl from the protein sample as possible.

It can be achieved by dialysis. Dialysis is a process of separating molecules in solution by the difference in their rates of diffusion through a semipermeable membrane, such as dialysis tubing.

This tubing allows the exchange of small molecules but not larger ones like proteins.

To calculate the final concentration of salt, we need to apply the formula for dilution: C1V1 = C2V2Here, C1 is the initial concentration of NaCl in the sample, which is 0.5M.

V1 is the volume of the sample, which is 5.0 ml.

V2 is the final volume of the sample,

which is the sum of the volume inside the tubing and the volume of distilled water outside the tubing.

Since the tubing is semipermeable, we assume that water will move into the tubing to equalize the concentration.

So, the final volume will be greater than 5.0 ml.

Let's say the final volume is 100 ml.

Then, we can calculate the final concentration of salt (C2) as follows:C1V1 = C2V2 ⇒ (0.5 M) (5.0 ml) = C2 (100 ml)⇒ C2 = 0.025 M or 25 mM

To know more about semipermeable membrane visit;

https://brainly.com/question/12802799

#SPJ11

1.82 10-9 M of Ni (H2O)62+ ions are present in the solution at equilibrium.

Using the Kd expression, we get:

Kd = [Ni2+] H2O/6 and Ni(H2O)6/2+ When we enter the values, we obtain:

1/ (5.5 × 10^8) = (0.00166 - x) (1)^6 / x

The result of solving for x is:

x = 1.82 10-9 M

The process is considered to be in equilibrium when the observable properties, such as color, temperature, pressure, concentration, etc. do not change.

As "balance" is the definition of the word "equilibrium," it follows that a chemical reaction represents a balance between the reactants and products involved in the reaction. In some physical processes, such as the melting of ice at 0°C, when both ice and water are present at equilibrium, the equilibrium state may also be observed.

Physical equilibrium refers to the equilibrium that results from physical processes like the melting of solids, the dissolving of salt in water, etc., whereas chemical equilibrium refers to the equilibrium that results from chemical reactions.

Learn more about equilibrium here:

brainly.com/question/30694482

#SPJ4

correct question is:

1. Write the expression for the dissociation constant needed to determine the concentration of Ni(H2O)62+ ions at equilibrium in the solution formed in Part 1.

kd=

Calculate the concentration of Ni(H2O)62+ ions at equilibrium in the solution formed?

The second law of thermodynamics is responsible for fatty acids segregating into droplets when they are mixed with water. This law states that the universe will become more disordered over time.

It means that energy will tend to disperse or dissipate in a way that is less organized.In the case of fatty acids, the second law of thermodynamics means that the system will try to minimize the energy required to maintain a given configuration. Fatty acids are amphiphilic, which means they have both hydrophilic (water-loving) and hydrophobic (water-fearing) parts. The hydrophilic heads are attracted to water, while the hydrophobic tails avoid water. When mixed with water, the hydrophilic heads of the fatty acids interact with the water molecules, and the hydrophobic tails segregate together to avoid contact with water.This segregation is due to the hydrophobic effect, which is the tendency of nonpolar molecules to minimize contact with polar molecules like water. The hydrophobic effect drives the aggregation of the fatty acids into droplets in the water.

To know more about thermodynamics visit:

https://brainly.com/question/33422249

#SPJ11

In a 1h nmr spеctrum of thе following molеculе, thе protons on carbon a will bе farthеr upfiеld than thе protons on carbon b.

According to convеntion, thе "high fiеld" or "upfiеld," which is plottеd on thе x axis in NMR towards thе right but corrеsponds to lowеr numbеrs, dеnotеs grеatеr shiеlding, whilе thе "low fiеld" or "downfiеld," which is on thе lеft sidе of thе x axis but corrеsponds to highеr numbеrs, dеnotеs lеss protеctеd nuclеi.

Thе lеvеl of еlеctron dеnsity surrounding thе atom dеtеrminеs thе magnеtic fiеld fеlt at thе nuclеus. As a rеsult, thе spеctrum shifts furthеr upfiеld thе highеr thе еlеctron dеnsity.

Thе shift occurs farthеr downfiеld thе lеss еlеctron dеnsity thеrе is in thе arеa surrounding thе atom.

To learn more about upfiеld, visit:

https://brainly.com/question/31594600

#SPJ4

The four properties of water that are hydrogen bonds and dipolarity responsible for are as follows:

Surface tension Cohesion Capillary action High specific heat capacity Explanation:

Hydrogen bonds and dipolarity are responsible for the four main properties of water.

Surface tension:

Surface tension occurs when water molecules are attracted to one another, which creates a thin surface film on the top of the water.

Hydrogen bonds are responsible for this attraction Cohesion:

The force of attraction that holds together molecules of the same substance is known as cohesion. Cohesion occurs in water due to hydrogen bonding.

Capillary action:

Capillary action is the movement of water molecules up a narrow tube, even against gravity.

This is caused by the combination of hydrogen bonding and dipolarity.

High specific heat capacity: Water can absorb and release a large amount of heat with only a small change in temperature. Hydrogen bonding is responsible for this ability of water.

To know more about dipolarity visit;

https://brainly.com/question/11862826

#SPJ11

In the below equations, (s) indicates the solid phase and (aq) indicates the aqueous phase. When writing balanced chemical equations, it is important to follow the law of conservation of mass. It means that the mass of the reactants must be equal to the mass of the products formed.

The chemical equations for the following reactions occurring in aqueous solutions are:

1. Sodium Carbonate + Calcium Chloride:

Na2CO3 (aq) + CaCl2 (aq) → 2NaCl (aq) + CaCO3 (s)

2. Lead (II) Nitrate + Lithium Chloride:

Pb(NO3)2 (aq) + 2LiCl (aq) → 2LiNO3 (aq) + PbCl2 (s)

3. Iron (III) Chloride + Sodium Hydroxide:

FeCl3 (aq) + 3NaOH (aq) → 3NaCl (aq) + Fe(OH)3 (s)

4. Ammonium Iodide + Silver Nitrate:

NH4I (aq) + AgNO3 (aq) → AgI (s) + NH4NO3 (aq)

5. Barium Nitrate + Aluminum Sulphate:

Ba(NO3)2 (aq) + Al2(SO4)3 (aq) → 2Al(NO3)3 (aq) + 3BaSO4 (s)

to know more about law of conservation of mass visit:

https://brainly.com/question/2288619

#SPJ11

The theoretical yield of NH₃ in grams is 11.98 g. Answer: 11.98 g.

The balanced chemical equation for the reaction between H₂ and N₂ to form NH₃ can be expressed as shown below:

3H₂(g) + N₂(g) → 2NH₃(g)\

From the balanced chemical equation, 3 moles of H₂ reacts with 1 mole of N₂ to give 2 moles of NH₃.

The molar masses of the reactants and product can be calculated as follows:

M(H₂) = 2 g/molM(N₂)

= 28 g/molM(NH₃)

= 17 g/mol

By comparing the masses of the reactants to the ratio of their molar masses, we can find the limiting reagent.

This is the reactant that is completely consumed and limits the amount of product formed in the reaction. Thus:moles of

H₂ = mass ÷ molar mass

= 1 g ÷ 2 g/mol = 0.5 molesmoles of N₂ = mass ÷ molar mass

= 9.86 g ÷ 28 g/mol

= 0.3521 moles

Using the mole ratio from the balanced chemical equation, the moles of NH₃ that should be produced by the limiting reagent can be determined.

Therefore,moles of NH₃

= 0.3521 moles N₂ × (2 moles NH₃ ÷ 1 mole N₂)

= 0.7042 moles NH₃

The theoretical yield of NH₃ in grams can be calculated as follows:mass of NH₃ = moles × molar mass = 0.7042 moles × 17 g/mol = 11.98 g NH₃.

To know more about theoretical yield visit:-

https://brainly.com/question/32891220

#SPJ11

When 468.7 g of gasoline (isooctane) undergoes combustion, 32.8 moles of CO₂ are released.

Combustion is a chemical reaction that occurs when a substance reacts with oxygen, usually in the form of a gas, producing heat and often light. It is a type of exothermic reaction characterized by a rapid release of energy in the form of heat and light.

During combustion, the substance undergoing combustion, known as the fuel, combines with oxygen in a process called oxidation. The reaction releases energy in the form of heat and light, and the products of combustion are typically carbon dioxide and water. In some cases, combustion may also produce other byproducts such as carbon monoxide, nitrogen oxides (NOx), and particulate matter.

The balanced equation for the combustion of isooctane can be represented as:

2 C₈H₁₈ + 25 O₂ → 16 CO₂ + 18 H₂O

From the equation, 2 moles of isooctane burned, 16 moles of CO₂ are produced.

Molar mass of isooctane (C₈H₁₈) = 8(12.01 g/mol) + 18(1.01 g/mol) = 114.22 g/mol

Number of moles of isooctane = mass / molar mass = 468.7 g / 114.22 g/mol

Number of moles of CO₂ = (Number of moles of isooctane) × (16 moles of CO₂ / 2 moles of isooctane)

Number of moles of CO₂ = (468.7 g / 114.22 g/mol) × (16 mol CO₂ / 2 mol isooctane)

Number of moles of isooctane = 468.7 g / 114.22 g/mol = 4.10 mol

Number of moles of CO₂ = (4.10 mol isooctane) × (16 mol CO₂ / 2 mol isooctane)

= 32.8 mol CO₂

Learn more about Combustion, here:

https://brainly.com/question/31123826

#SPJ4

In general, alcohols dissolve when mixed with water because the hydroxyl (-OH) groups in alcohols can form hydrogen bonds with water molecules.

Alcohols are organic compounds that contain a hydroxyl group (-OH) attached to a carbon atom. Water, on the other hand, is a polar molecule with oxygen being more electronegative than hydrogen, resulting in a partial negative charge on the oxygen atom and partial positive charges on the hydrogen atoms.

When alcohols are mixed with water, the hydroxyl group (-OH) in alcohols can form hydrogen bonds with the partial positive hydrogen atoms in water molecules. Hydrogen bonding is a strong intermolecular force that allows the alcohol molecules to interact with water molecules, leading to dissolution.

The formation of hydrogen bonds between alcohol and water molecules helps to overcome the intermolecular forces present within the alcohol itself, such as van der Waals forces or dipole-dipole interactions. As a result, alcohols dissolve in water and form homogeneous mixtures.

learn more about alcohols here:

https://brainly.com/question/33463022

#SPJ4

The volume of air in the jumper's lungs in the wake of plunging is roughly 1.196 L and the tension of dinitrogen monoxide at 16.8 °C is around 5.12 atm.

To take care of these issues, we can utilize the ideal gas regulation, which states:

PV = nRT

where P is the strain, V is the volume, n is the number of moles, R is the best gas consistency, and T is the temperature in Kelvin.

How about we take care of the issues individually:

The volume of air in the lungs subsequent to plunging:

Given:

Introductory volume (V1) = 1.7 L

Starting temperature (T1) = 29.9 °C = 29.9 + 273.15 = 303.05 K

Starting tension (P1) = 1.3 atm

Last temperature (T2) = 9 °C = 9 + 273.15 = 282.15 K

Last strain (P2) = 1 atm

Utilizing the ideal gas regulation, we can set up the situation:

P1V1/T1 = P2V2/T2

Settling for V2:

V2 = (P1V1T2)/(P2T1)

= (1.3 * 1.7 * 282.15)/(1 * 303.05)

≈ 1.196 L (adjusted to 3 decimal spots)

Consequently, the volume of air in the jumper's lungs in the wake of plunging is roughly 1.196 L.

The strain of dinitrogen monoxide at 16.8 °C:

Given:

The measure of dinitrogen monoxide (n) = 73.7 g

Volume (V) = 2.8 L

Temperature (T) = 16.8 °C = 16.8 + 273.15 = 290.95 K

Utilizing the best gas regulation:

PV = nRT

Addressing for P:

P = nRT/V

= (73.7 g/44.02 g/mol) * (0.0821 L atm/mol K) * 290.95 K/2.8 L

≈ 5.12 atm (adjusted to 1 decimal spot)

Accordingly, the tension of dinitrogen monoxide at 16.8 °C is around 5.12 atm.

Learn more about gas laws at:

https://brainly.com/question/30458409

#SPJ4

Since pOH + pH = 14, pOH = 14 − pH = 14 − 6.25 = 7.75. Now, since Kw = [H+][OH−] = 10−14 at 25∘C (which can be derived from the definition of Kw and the self-ionization reaction of water) and since the reaction is endothermic, the value of Kw at higher temperatures will be greater than 10−14.

Therefore, a greater concentration of OH− ions is needed to reach equilibrium at 100∘C, which makes the solution more basic. So, the higher the pH, the lower the pOH, hence the answer is (d) 7.75.17. The concentration of aqueous Ba(OH)2 that yields a pH of 9.0 is calculated as follows: pOH = 14 − 9 = 5; therefore, [OH−] = 10−pOH = 10−5.

Since the concentration of OH− ions in Ba(OH)2 is double its concentration, the concentration of Ba(OH)2 required to get [OH−] = 10−5 is 2 × 10−5 M, thus the answer is (b) 2 × 10−5 M.

To know more about self-ionization visit:-

https://brainly.com/question/27549438

#SPJ11

When solid iron(II) chloride dissolves in water, it produces aqueous ions. The equation is FeCl2 (s) → Fe2+ (aq) + 2 Cl− (aq).When solid magnesium sulfite dissolves in water, it also produces aqueous ions.

The equation is MgSO3 (s) → Mg2+ (aq) + SO32− (aq).When solid ammonium iodide dissolves in water, it produces aqueous ions. The equation is NH4I (s) → NH4+ (aq) + I− (aq).Electrolytes are chemical compounds that conduct electricity in a solution or when molten.

Ionic compounds like ammonium iodide, iron(II) chloride, and magnesium sulfite conduct electricity in their aqueous state since they form ions in a solution. Strong electrolytes dissolve completely in water and conduct electricity well.

To know more about aqueous ions visit:-

https://brainly.com/question/1399496

#SPJ11

Answer:

heart

Explanation:

because the heart is the answer

A chelate is a coordination compound that is formed when a ligand forms a ring-like structure around a central metal atom. In order to form a chelate, the ligand must have multiple binding sites. Of the following molecules or ions, methylamine (CH3NH2) CANNOT act as a chelate.the correct option is d.

Chelating agents are molecules that have multiple binding sites, allowing them to bind with metal ions in two or more places. The ligand forms a ring-like structure around the metal ion, which is held in place by coordinate covalent bonds between the ligand's binding sites and the metal ion's electrons. Chelates are more stable than simple coordination compounds because the ligand's ring structure prevents the metal ion from interacting with other molecules or ions.

Therefore, in order to form a chelate, the molecule or ion must have multiple binding sites.Methylamine (CH3NH2) does not have multiple binding sites, so it cannot act as a chelate. Ethylenediamine (H2NCH2CH2NH2) and phenanthroline (C12H8N2) both have two nitrogen atoms that can act as binding sites, making them capable of forming chelates. Ethylenediaminetetraacetate ion ((O2CCH2)2NCH2CH2N(CH2CO2)24-) has four acetate groups, each of which can act as a binding site, allowing it to form a chelate.

To know more about chelate  visit:-

https://brainly.com/question/2959152

#SPJ11

35.76 grams of NH3 are present in 1.70 L of 1.50 M NH3 solution. To calculate the number of grams of NH3 present in a 1.70 L of 1.50 M NH3 solution.

The following formula is used:

`Molarity = moles of solute / liters of solution`.

Therefore, to solve the question above, the first step is to calculate the number of moles of NH3 in the solution.`

Molarity = moles of solute / liters of solution

`Rearranging the equation to isolate moles of solute, we get:

`Moles of solute = Molarity x liters of solution`Substituting the values given in the question, we get:`

Moles of NH3 = 1.50 M x 1.70 L`Moles of NH3 = 2.55 moles of NH3

To find the number of grams of NH3 in the solution, we use the molar mass of NH3.

`Molar mass of NH3 = 14.01 g/mol

`The number of grams of NH3 present in the solution is:`

Number of grams of NH3 = Moles of NH3 x Molar mass of NH3`

Number of grams of NH3 = 2.55 moles x 14.01 g/mol

Number of grams of NH3 = 35.76 g

To know more about solution visit:-

https://brainly.com/question/1616939

#SPJ11

Rosalind's actual yield of PbI2 product is 1.2455 g.

According to the information given in the question;

Theoretical yield = 1.412g

Percent yield = 88.184%

Actual yield = ?

Let's first write the formula of the reaction:

Pb(NO₃)₂(aq) + 2KI(aq) → PbI₂(s) + 2KNO₃(aq)

Now we can calculate the actual yield using the following formula:

Actual yield = (Percent yield / 100) x Theoretical yield

Actual yield = (88.184 / 100) x 1.412

Actual yield = 1.2454808 grams

Rosalind's actual yield of PbI2 product is 1.2455 g.

To know more about product visit:

https://brainly.com/question/33332462

#SPJ11

1000 millimoles make up a mole, 58g/l = 1M, 58mg/l = 1mM.The atomic mass of Na = 23 and that of Cl = 35. So, the molecular mass of NaCl = 23+35 = 58.

We are given 150 μmol of NaCl and we need to calculate the number of grams of NaCl that will make the solution. We will convert μmol to grams using the molecular mass of NaCl:150 μmol = 150 × 10^(-6) mol = 150 × 10^(-6) × 58 g = 8.7 mg.

Therefore, 8.7 mg of NaCl will make a solution that contains 150 μmol of NaCl.Note: 1000 millimoles make up 1 mole, which is the amount of a substance that contains 6.02 × 10^23 particles. So, we use this conversion factor to convert from millimoles to moles when needed.

To know more about atomic mass visit:-

https://brainly.com/question/29117302

#SPJ11

The kinetics of activation of acetyl-CoA by citrate relates to the rate of polymerization of carboxylase which ultimately impacts fatty acid biosynthesis.

The enzymatic mechanism that converts acetyl-CoA to malonyl-CoA, a critical step in fatty acid biosynthesis, influences the kinetics of citrate-activated acetyl-CoA activation.

Citrate activates acetyl-CoA carboxylase allosterically. Citrate interaction to the enzyme causes conformational changes that boost enzymatic activity and polymerization carboxylase.

Citrate activates acetyl-CoA to regulate fatty acid synthesis. Citrate binds to acetyl-CoA carboxylase, increasing its activity and polymerization rate. Citrate levels indicate metabolic substrate abundance, hence this process upregulates fatty acid synthesis.

Learn more about kinetics, here:

https://brainly.com/question/33585752

#SPJ4

The Lewis structure is shown below:The formal charge is defined as the number of valence electrons in an atom minus the total number of electrons that the atom has in the Lewis structure. If the formal charge of the central atom is 0, the possible identity or identities of the central atom are N, P, or As.

The nitrogen, phosphorus, and arsenic atoms have five valence electrons, which are denoted as one dot and three lines for each electron in a Lewis structure.A nitrogen, phosphorus, or arsenic atom with no dots would have a formal charge of +1 because it would only have four electrons (one less than the number of valence electrons), while a nitrogen, phosphorus, or arsenic atom with two dots would have a formal charge of -1 because it would have six electrons (one more than the number of valence electrons).

The formal charge can be determined using the following formula:FC = V - N - 1/2Bwhere FC is the formal charge, V is the number of valence electrons, N is the number of nonbonding electrons, and B is the number of bonding electrons.In order to have a formal charge of 0, the number of nonbonding electrons and bonding electrons on the central atom should be balanced. In this Lewis structure, there are four nonbonding electrons and four bonding electrons on the central atom, which corresponds to a formal charge of 0. Therefore, the possible identity or identities of the central atom are N, P, or As.

To know more about Lewis structure  visit:-

https://brainly.com/question/4144781

#SPJ11

To make an acetate buffer at ph 4.76 starting with 500 ml of 0.1 m sodium acetate (pk acetic acid = 4.76), you could add  0.025 mol

moles of sodium acetate = 0.1 M × 500 ml = 0.05 moles

volume = moles / concentration

volume = 0.05 moles / 0.1 M

volume = 0.5 L = 500 ml

( 0.1-x ) / x = 1

cross multiply

x = 0.05

x = 0.05 M

Concentration of sodium acetate = 0.1

0.1 - 0.05

= 0.05

= 0.05 M * 0.5L

= 0.025 mol

Read more on acetate buffer here https://brainly.com/question/28945668

#SPJ4

The shape of a molecule is determined by the repulsion among not only the bonding electron groups but also the non-bonding (lone pair) electron groups. Both types of electron groups contribute to the overall geometry of the molecule and influence its shape. The given statement is false.

In a molecule, the shape is influenced by the arrangement of electron groups around the central atom. These electron groups can be either bonding pairs (resulting from shared electron pairs in covalent bonds) or non-bonding pairs (also known as lone pairs).

The repulsion between electron groups determines the geometry of the molecule. According to VSEPR (Valence Shell Electron Pair Repulsion) theory, electron groups try to position themselves as far apart as possible to minimize repulsion and achieve the most stable arrangement.

In determining the molecular shape, both the repulsion among bonding electron groups and the repulsion between bonding and non-bonding electron groups are considered. Non-bonding electron pairs exert a stronger repulsion compared to bonding electron pairs. Therefore, the presence of lone pairs can affect the overall molecular shape by altering the bond angles and influencing the arrangement of atoms in the molecule.

Hence, to accurately determine the shape of a molecule, it is essential to consider both the repulsion among bonding electron groups and the influence of non-bonding (lone) electron pairs.

Learn more about repulsion here:

https://brainly.com/question/19339318

#SPJ 4

The relationship of the given study about the amounts of gases absorbed by water at different temperatures and under different pressures describes a: Scientific law

Scientific law is also referred to as a natural law. It  implies a cause and effect between the observed elements and always applied under the same conditions .

Now, we are told that:

- He studied the amounts of gases absorbed by water at different temperatures and under different pressures.

- He stated a formula, p = kHc, which related the concentration of the dissolved gas at a constant temperature to the partial pressure of that gas in equilibrium with that liquid

Now, this would be close to what we know as law of partial pressure by Dalton and as such we can say that the relationship describes a Scientific law

Read more about Scientific Law at: https://brainly.com/question/11313296

#SPJ4

Complete question is:

English chemist William Henry studied the amounts of gases absorbed by water at different temperatures and under different pressures. In 1803, he stated a formula, p = kHc, which related the concentration of the dissolved gas at a constant temperature to the partial pressure of that gas in equilibrium with that liquid. This relationship describes a scientific _____?

There are 0.027 moles of sodium chloride in a saltshaker containing 14 grams of salt.

Dimensional analysis is an approach used to solve mathematical problems by systematically choosing the appropriate conversion factors and applying them to the given values to get the required units. The following are the steps used in setting up dimensional analysis to solve the problem of calculating the number of moles of sodium chloride in a saltshaker containing 14 grams of salt.

Step 1: Write down the given value and the required units The given value is 14 grams of salt. The required units are the number of moles of sodium chloride.

Step 2: Write down the appropriate conversion factors The appropriate conversion factors are the molar mass of sodium chloride, which is 58.44 g/mol, and Avogadro's number, which is 6.022 x[tex]10^{23}[/tex] particles/mol.

Step 3: Set up the problem using the conversion factors 14 g salt x (1 mol NaCl / 58.44 g) x (6.022 x [tex]10^{23}[/tex]particles / 1 mol) = 1.63 x [tex]10^{22}[/tex] particles NaCl

Step 4: Convert the number of particles to moles by dividing by Avogadro's number 1.63 x [tex]10^{22}[/tex] particles

NaCl / 6.022 x 10^23 particles/mol = 0.027 moles NaCl

Therefore, there are 0.027 moles of sodium chloride in a saltshaker containing 14 grams of salt.

To know more about sodium chloride visit:

https://brainly.com/question/14516846

#SPJ11