According to the Dalton Law in a blend of non-reacting gases, the entire pressure will be equivalent to the total of partial pressures of the individual gases.
The pressure of H₂ gas collected in the tube will be 728.8mm Hg.
This can be calculated by:
Dalton's formula:
Ptotoal = PH2O + PH2
Given :
Ptotal = total pressure of gases = 748. 6mm Hg
PH2O = partial pressure of water = 19.8 mm Hg
PH2 = partial pressure of hydrogen = ?
Now using the formula we will calculate:
748. 6mm Hg = 19.8 mm Hg + PH2
728.8mm Hg = PH2
Therefore, the pressure of the hydrogen in the tube is 728.8mm Hg.
Hence 728.8mm Hg is a correct answer.
To know more about Dalton Law follow link
https://brainly.com/question/14119417
#SPJ4
Thirty grams of lead oxide and fifteen grams of ammonia react completely to produce solid lead, nitrogen gas, and liquid water. What will be approximate mass of all three products?.
The stated assertion is that the combined mass of the three goods is about 45 g.
What is the purpose of nitrogen?The chemical industry depends on nitrogen. It is used to create explosives, nylon, nitric acid, fertilizers, and colors. Nitrogen must initially be combined with hydrogen to create ammonia in order to create these products. The Haber process is used for this.
Is nitrogen bad for people?People lose their lives every year by inhaling "air" with insufficient oxygen. Many people believe nitrogen gas is safe since it makes up 78 percent of something like the air we breathe. Only when nitrogen is combined with the right amount of oxygen is it safe to breathe, though.
To know more about nitrogen visit:
https://brainly.com/question/16711904
#SPJ4
Identify each category of substance as soluble or insoluble in water.
Most carbonate and phosphate salts blank
Most halide (Br-, Cl-, and I-) salts blank
Most silver salts blank
salts of group 1 elements blank
Most nitrate salts blank
Except for salts of Metallic elements , ammonium, NH, most phosphates (PO43) and carbonates (CO32) are insoluble. Unless they are those from Group IA metals, all oxides are insoluble. Sulfides S2- are often insoluble.
What is the purpose of ammonium?Ammonium produced by industrial is used as fertilizers to the rate of 80%. In contrast to all of these uses, nitrogen is turned into chemicals, explosives, textiles, insecticides, dyes, and many other chemicals. It is also used to disinfect water sources.
Is ammonium unhealthy for you?High rates of ammonia in the air can result in rapid ocular, nose, throat, and respiratory tract burning as well as blindness, lung damage, or perhaps even death. Lower quantities of the substance can irritate the nose, throat, and induce coughing.
To know more about ammonium visit :
https://brainly.com/question/10834028
#SPJ4
would you need to use molar mass in this question? how many moles are in 4.5 x 10^24 particles of water?
7.471 moles are present in 4.5 x 10^24 particles of water.
What is the mole?
The mole, which is denoted by the symbol "mol," is the volume of a system that includes as many elementary particles as there are atoms in 0.012 kilograms of carbon 12.
We have a clear idea of how many molecules makeup 1 mole of any given substance according to Avogadro's hypothesis. This implies that 6.02x1023 molecules are also present in 1 mole of water.
Now, assuming a mole of water has 6.02x10^23 molecules in it.
As a result, X mol of H2O will contain 4.5 x 10^24 molecules, or
X mol of water = (4.5 x 10^24)/6.02x1023 or 7.471 moles of water.
Therefore 4.5 x 10^24 particles of water contain 7.471 moles.
For more questions like Mole click the link below:
https://brainly.com/question/22809387
#SPJ4
TRUE/FALSE. dimethylaminopyridine (dmap) is often used as a catalyst in esterification reactions. a basic solvent such as triethylamine is used to react with the liberated proton from the alcohol group.
Dimethylaminopyridine hydrochloride (dmap) is a recyclable catalyst used for the acylation of alcohols to form esters. It used used in a base free condition. Therefore, the statement is false.
What is a catalyst?A catalyst is chemical substance used to boost the rate of a reaction without undergoing a change itself. Hence, catalyst provide favorable platform for a reaction to occur.
Dimethylaminopyridine is a basic compound which and it is a recyclable catalyst used for the esterification reactions. In esterification alcohols are acylated to form esters using DMAP in the presence of acetic anhydride.
Acetic anhydride forms acetate ions which act as the base to accept the proton from the alcohol and it adds to the nucleophile DMAP. Hence, no need of any base such as triethylamine. Thus, the statement is false.
To find more on DMAP catalyst, refer here:
https://brainly.com/question/13572259
#SPJ1
Consider the insoluble compound iron(II) hydroxide, Fe(OH)2. The iron(II ion also forms a complex with cyanide ions. Write a balanced net ionic equation to show why the solubility of Fe(OH)2(s) increases in the presence of cyanide ions and calculate the equilibrium constant for this reaction. For Fe(CN)64(aq), Kf- 1.0x1035. Use the pull-down boxes to specify states such as (aq) or (s). 3 Knet
The net ionic reaction is written as; [tex]Fe(OH)_{2} (aq) + 2CN^-(aq) ------ > Fe(CN)_{2} (aq) + OH^-(aq)[/tex]
What is the net ionic reaction?We know that the net ionic reaction has to do with the kind of reaction that shows us all the species that have undergone a change in the system. Now we can see that the reaction occurs between the cyanide ion and the iron II hydroxide.
This implies that the cyanide ion would replace the hydroxide ion in the coordination sphere of the central iron II ion as we can see and we have been asked to put down the net reaction equation for the reaction.
Learn more about net ionic reaction:https://brainly.com/question/28193640
#SPJ1
What are 3 types of mutagens?.
Mutagens may be bodily mutagens, chemical mutagens, or biological mutagens.
In genetics, a mutagen is a physical or chemical agent that completely adjusts genetic cloth, typically DNA, in an organism and therefore will increase the frequency of mutations above the natural historical past stage.
Mutagenic retailers, which could threaten the integrity of the genetic code with the aid of inflicting mutations in DNA, pose a serious threat to human fitness. they've lengthy been implicated in a variety of genetically inherited afflictions, as well as most cancers, aging and neurodegenerative illnesses like Alzheimer's.
Many mutagens are highly poisonous to proliferating cells, and they may be frequently used to smash cancer cells. Alkylating dealers which include cyclophosphamide and cisplatin, as well as an intercalating agent along with daunorubicin and doxorubicin can be used in chemotherapy.
Learn more about mutagens here:-https://brainly.com/question/1477357
#SPJ4
If you have 163.1 ml of a 0.8450 m solution of sodium hydroxide, how many ml of a 0.450 m solution of sulfuric acid do you need in order to neutralize it?
0.1M sulfuric acid = 1000 ml solution contains 0.1 ml sulfuric acid
Mass of sulfuric acid = 0.01×98=0.98g
Stoichiometric equation:
[tex]2NaOH+H_{2}SO_{4} = Na_{2}SO_{4} + 2H_2O[/tex]
Mass of sodium hydroxide=0.8g
Hence, to neutralize 0.98 g of sulfuric acid 0.8 g of sodium hydroxide is required.
What is a stoichiometric equation?
Calculating the products and reactants in a chemical reaction is known as stoichiometry. Essentially, statistics are what it is about.
Stoichiometry is a crucial idea in chemistry that enables us to compute reactant and product amounts using balanced chemical equations. We employ the ratios from the balanced equation in this situation.
Generally speaking, the amount of substance present determines how all reactions will behave. of its molecules or atoms.
To know more about stoichiometric equations, click the link given below:
https://brainly.com/question/14465605
#SPJ4
if the amount of 2-naphthol used in this reaction was doubled, would the reaction rate be different? if so, how and why?
First order in the substrate and first order in the nucleophile define the rate of an SN2 reaction. The reaction rate doubles with a doubling of the substrate concentration. The rate also doubles when the concentration of the nucleophile is increased.
What is first order reaction?It is known as a first-order reaction when the rate of the reaction is proportional to the reactant concentration. Alternatively, the reaction rate doubles when the concentration is increased. The decomposition reaction is an example of a first-order reaction with one or two reactants.Depending on the concentration of one of the reactants, a first-order reaction rate will occur. Second-order reaction rates are inversely correlated with the square of a reactant's concentration or the product of the concentrations of two reactants.A chemical reaction that has only one reactant present at any given time has been referred to as a first-order reaction. If the first-order reactant concentration is doubled in such reactions, the process will accelerate.To learn more about first order reaction refer to :
https://brainly.com/question/518682
#SPJ4
the nuclear equation of the beta decay of 39/17Cl
The nuclear equation of the beta decay of 39/17 Cl is as follows:
39/17 Cl → 39/18 Cl + 0/-1 e
What is nuclear reaction?A nuclear reaction is a process such as the fission of an atomic nucleus, or the fusion of one or more atomic nuclei and/or subatomic particles in which the number of protons and/or neutrons in a nucleus changes.
The reaction products may contain a different element or a different isotope of the same element due to this change.
A beta decay is a nuclear reaction in which a beta particle (electron or positron) is emitted. A beta particle is an energetic electron or positron produced as the result of a nuclear reaction or nuclear decay. A beta decay occurs as depicted below;
A/Z X → A/(Z + 1) X‘ + e
Where;
A and Z are the mass number and atomic number of the decaying nucleusX and X′ are the initial and final elements, respectivelyTherefore, if a 39/17 Cl undergoes beta decay, the nuclear reaction can be given as follows:
39/17 Cl → 39/18 Cl + 0/-1 e
Learn more about beta decay at: https://brainly.com/question/25455333
#SPJ1
which of the following would be the best evidence to support that a random genetic smaple came from a prokaryotic cell? responses the genetic material is organized into multiple strands of linear dna the genetic material is organized into multiple strands of linear dna the amount of genetic material is relatively larger than the genetic material found in any other type of cell. the amount of genetic material is relatively larger than the genetic material found in any other type of cell. the genetic material is structured as a circular molecule of dna the genetic material is structured as a circular molecule of dna the genetic sample obtained holds information in the form of rna molecules
As of around 3.5 billion years ago, there is fossil evidence of microbial mats or huge biofilms, which may be the oldest prokaryotic life forms on Earth.
How can prokaryotic cells carry genetic information?Bacteria and other prokaryotic cells have a free-floating, often circular chromosome that is not protected by a nuclear membrane. Instead, the DNA is merely present in the nucleoid, a part of the cell.
What one method of genetic information exchange does prokaryotic cell use?One bacterium can exchange genetic material with another directly through the process of conjugation. One bacterium acts as the genetic material donor during conjugation, and another bacterium acts as the recipient.
To know more about prokaryotic visit:-
https://brainly.com/question/15329345
#SPJ4
What is the pattern of counting?.
In a series of integers, there might be patterns or sequences. Common relationships between all numbers are typically established by this pattern.
In chemistry, what exactly is a pattern?All throughout nature, there are patterns—regular, comprehensible forms or sequences. When researchers notice a pattern in the way things happen or when something deviates from the expected pattern, a scientific issue may be raised. To categorize phenomena or things into groupings, scientists can employ patterns.
What sort of behavior patterns exist?After learning the five fundamental types of chemical reactions—synthesis, breakdown, single replacement, double replacement, and combustion—students find it much simpler to accomplish this.
To know more about chemistry pattern visit:
https://brainly.com/question/15344589
#SPJ4
when drawing the lewis structure of the h 2 c o molecule, the structure should represent a total of 12 valence electrons. based on the elements present, a total of electrons are needed for a stable structure. that, there should be bonds in the structure.
We have the total of 12 valence electrons for the H₂CO Lewis structure. starting by putting the Carbon in middle, and then the Hydrogens always go on outside, and then the Oxygen will go upwards. . We have 12 valence electrons.
We'll put 2 between atoms to form the chemical bonds and then on the outside to fill the octet of the Oxygen. So we just have the 2, 4, 6, 8, 10, and 12 electrons. At this point, everything has the full outer shell except the Carbon, which only has six valence electrons. We can take these 2 valence electrons to from Oxygen and then the share them to form the double bond. Now the Oxygen has 8 valence electrons, still has 8, but Carbon has 8. Thus ,the Hydrogens, it only need 2 for a full outer shell, so they're fine.
So in Lewis structure for H₂CO, it has completed the octets for each of the atoms, and where only 12 valence electrons are used.
To know more about lewis structure, please refer:
https://brainly.com/question/20300458
#SPJ4
what is the molar mass of a substance if a total charge of 4934.5 c deposited 5.47 g of the substance on an electrode through a reaction involving 2 electrons?
To find the molar mass of a substance from the given information, you need to first determine the number of moles of the substance that was deposited on the electrode.
The charge on an electron is about -1.60 x 10^-19 coulombs, so the total charge of 4934.5 c deposited on the electrode corresponds to about 3092.19 moles of electrons. Since the reaction involves two electrons per mole of the substance, the number of moles of the substance deposited on the electrode is about 1546.1.
The molar mass of a substance is the mass of one mole of the substance, so to find the molar mass of the substance in this case, you need to divide the mass of the substance deposited on the electrode (5.47 g) by the number of moles of the substance (1546.1):
Molar mass = (5.47 g) / (1546.1 mol) = about 0.00356 g/mol
The unit for molar mass is usually grams per mole (g/mol), so the molar mass of the substance in this case is about 0.00356 g/mol.
Learn more about molar mass:
https://brainly.com/question/27445708
#SPJ4
What is produced along combustion of hydrocarbons?.
As hydrocarbons burn, carbon dioxide, water, and heat are created. When a hydrocarbon combines chemically with oxygen to produce carbon dioxide, the process is known as hydrocarbon combustion.
heat, water, and. Hydrocarbons are molecules made of both carbon and hydrogen. They are well known for being the main ingredient in fossil fuels including coal, oil, and gas. One carbon atom is covalently doubly linked to two oxygen atoms in every carbon dioxide molecule, giving it the chemical formula carbon dioxide is CO2. An organic substance called a hydrocarbon is made completely of hydrogen and carbon dioxide. Group 14 hydrides include things like hydrocarbons. The smells of hydrocarbons are typically mild or best characterized by that of gasoline and lighter fluid. Hydrocarbons are typically colourless and hydrophobic.
Learn more about hydrocarbons here
https://brainly.com/question/17578846
#SPJ4
Do you know what a caucus?.
A caucus is a gathering of people who support or are members of a particular political party or movement. The precise definition varies according to country and political culture.
Caucuses are groups of Representatives who work together to achieve common objectives. Coalitions, study groups, task forces, and working groups are all terms for them. Caucus. A closed meeting at the state level of members of the same political party to vote on candidates for President and select delegates to represent that state at the National Convention later in the summer. The caduceus was carried by messengers and heralds in ancient Greece, apparently to protect the bearer by indicating that he was on a peaceful mission.
Learn more about Caucus here:
https://brainly.com/question/17032678
#SPJ4
how many liters of water can be made from 34 grams of oxygen gas and 6.0 grams of hydrogen gas at stp? what is the limiting reactant for this reaction?
According to the ideal gas law, the reaction can make 47 liters of water.
What is the ideal gas law?
The equation of state for a fictitious perfect gas is known as the ideal gas law, sometimes known as the generic gas equation.Although it has several limits, it is a decent approximation of the behavior of numerous gases under various conditions.Benoît Paul Émile Clapeyron introduced it for the first time in 1834 as a synthesis of the empirical Boyle's law, Charles' law, Avogadro's law, and Gay-law. Lussac'sIt is possible to assume that there are no intermolecular interactions between the molecules or atoms of an ideal gas in accordance with the underlying premises of the kinetic theory of ideal gasses.Its potential energy is therefore zero. As a result, the gas's only source of energy is the kinetic energy of its molecules or atoms.To know more about the ideal gas law, click the link given below:
https://brainly.com/question/28257995
#SPJ4
Diamond and Graphite 5. In which model does each C atom form 4 single bonds to neighboring atoms? What is the name of the geometrical arrangement around each C atom? Can you find a substructure, which contributes to the whole structure? Describe this substructure and relate it to one of the other models you made in this lab.
In diamond C atoms form 4 single bonds to neighboring atoms.
In diamond, the carbon atoms are arranged tetrahedrally. Each carbon atom is generally attached to four other carbon atoms with a C-C-C bond angle of 109.5 degrees. It is a strong and also rigid three-dimensional structure that results in an infinite network of atoms.
This in turn accounts for diamond's hardness, extraordinary strength and also durability and gives diamond a higher density than graphite Because of its tetrahedral structure, diamond also shows a great resistance to compression. Diamond will scratch all other materials and is one of the hardest material known. It is the best conductor of heat that we know, conducting up to five times the amount that copper usually does.
To know more about diamond
https://brainly.com/question/9286031
#SPJ4
solid iron(ii) hydroxide decomposes to form solid iron(ii) oxide and liquid water. write the balanced chemical equation for the reaction described.
Solid iron(ii) hydroxide decomposes to form solid iron(ii) oxide and liquid water. The balanced chemical equation for the reaction described as :
Fe(OH)₂(s) ----> FeO(s) + H₂O(l)
The Solid iron(ii) hydroxide decomposes to form solid iron(ii) oxide and liquid water is given as :
Fe(OH)₂(s) ----> FeO(s) + H₂O(l)
balanced reaction have atoms in the reactant side equal to the product side.
reactant product
Fe 1 1
O 2 2
H 2 2
so the reaction is balanced equation.
Fe(OH)₂(s) ----> FeO(s) + H₂O(l)
Thus, Solid iron(ii) hydroxide decomposes to form solid iron(ii) oxide and liquid water. The balanced chemical equation for the reaction described as :
Fe(OH)₂(s) ----> FeO(s) + H₂O(l)
To learn more about balanced equation here
https://brainly.com/question/15230071
#SPJ4
In the energy and Specific Heat lab, you measure the temperature change of water to study the specific heat of a metal. What statement explains the relationship between the water and the metal you are studying? Select one: The temperature change of the metal is equal to the temperature change of the water. The heat lost by the metal is equal to the heat gained by the water. The initial temperature of the metal equals the initial temperature of the water. The heat lost by the metal plus the heat gained by the water equals 100
The heat acquired by the water offsets the energy losses by the metal.
Why is specific heat important? What is it?The quantity of heat per unit mass required to increase the temperature by one degree Celsius is known as the specific heat or specific heat. The ability to distinguish between 2 polymeric composites using specific heat can be useful in calculating the processing temperature and volume of heat required.
In plain English, whatever is specific heat capacity?A pure substance's specific heat per unit mass is referred to as its heat capacities, or simply heat capacity. To put it another way, it is described as the quantity of heat necessary to raise the temperature at 1 kg of a substance by 1 K. It is represented in terms of
To know more about Specific Heat visit:
https://brainly.com/question/11297584
#SPJ4
The freezing point of a 1 m solution of FeCl is expected to be lower than that of a 1 m solution of glucose This is because Fels is more soluble and Choose compared with glucose CHECK e: 1.00 Choose... equal to FeCl3 is expected to be v lower than that of a 1 m soluti higher than compared with glucose. CHECK Status: Tries remaining: 2 Points possible: 1.00 Choose... is an electrolyte has a larger mass v is more soluble m solution of FeCl3 is expected to be lower than and Choose... compared CHEC ints possible: 1.00 solution of FeCl3 is expected to be lower than that compared with glucose dv Choose... has a larger van't Hoff factor has fewer moles of solute will not precipitate as much CHECK
The freezing point of a 1 m solution of FeCl is expected to be lower than that of a 1 m solution of glucose and this is because FeCL contains mole particles which means more solute particles than glucose.
Why is 1M Fecl3 have lower freezing point than 1M glucose solution?Dissolving something in water lowers its freezing point. This freezing point depression depends on the number of solute particles or solute ions or solute molecules present in the solution.This is because FeCL₃ can dissociate into cations and anions in aqueous solution. Therefore, aqueous solutions of 1 M FeCL₃ contain more dissolved particles compared to 1 M glucose solutions. Note that glucose cannot dissociate into ions in water. Therefore, their freezing points are higher.What is freezing point?Freezing is the phase change of a substance from liquid to solid.This is a phase change phenomenon, meaning that a substance changes from one cohesive state to another. The freezing point is the temperature at which a liquid changes physical state from liquid to solid at atmospheric pressure.These two phases are at the freezing point. Liquids and solids exist in equilibrium. That is, at this point both solid and liquid states exist at the same time. The freezing point of a substance depends on atmospheric pressure.Can learn more abut freezing point from https://brainly.in/question/53740725
#SPJ4
What is the meaning of 20 tens?.
20 tens, or 2010, equals 200 as the answer.
What purposes do TENS serve?A modest electrical current is used in transcutaneous electrical nerve stimulation (TENS), a technique for reducing pain. A TENS machine is a tiny, battery-powered gadget with electrode leads that are wired to sticky pads. The pads are immediately affixed to your skin.
TENS should be utilized when?According to studies, using TENS for at least 30 minutes while being active is the best strategy for treating chronic pain. When you're resting, lying down, or just sitting motionless, it works less well.
To know more about Tens visit:
https://brainly.com/question/28897197
#SPJ4
consider chromium contamination in a groundwater sample. at first, nothing is known of the chromium source, the groundwater characteristics, or the extent of the plume. rank in order the process for tracking the contamination and its remediation, with the first step on top.
As stated in the preceding sentence, Find out the water table and the site's geology.
What negative impacts does chromium have?According to some studies, chromium can occasionally cause irregular heartbeats, allergic responses, migraines, and sleep difficulties. Chromium may make renal or liver damage more likely. Must not take chromium if you have liver or kidney illness without first consulting your doctor.
Can chromium aid with weight loss?In addition to altering how glucose, insulin, and lipids are metabolized, chromium has also been shown to enhance lean body mass and lower body fat percentage, which may help people lose weight.
T o know more about chromium visit:
https://brainly.com/question/681602
#SPJ4
Suppose 13.8 g of sodium iodide is dissolved in 150. ml of a 0.60 M aqueous solution of silver nitrate. Calculate the final molarity of iodide anion in the solution. You can assume the volume of the solution doesn't change when the sodium iodide is dissolved in it. Round your answer to 1 significant digit.
Iodide anion has a molarity of 0.666 M in the solution.
NaI + AgNO3 ............> NaNO3 + AgI
No. of moles 0f NaI =13.8/138 =0.1
No. of moles 0f AgNO3 = 0.6*150/1000 = 0.09
After the reaction no. of moles 0f NaI = 0.01
No. of moles 0f AgNO3 =0
No. of moles 0f NaNO3 =0.09
No. of moles 0f AgI = 0.09
after the reaction no. of moles of I- = 0.01 + 0.09 = 0.1
M = (0.1/150) 1000
M = 0.666 M
Iodide anion in the solution has a molarity of 0.666 M.
Iodine is required by the body for healthy growth and development. Sodium iodide may be required for people who cannot obtain enough iodine from their normal diet or who require extra iodine.
To read more about sodium iodide, visit https://brainly.com/question/24166284
#SPJ4
what is the ph of the solution that is formed when 0.254 grams of sodium acetate is added to 50.00 ml of 0.122 m acetic acid (ka
The answer is pH = 4.83
Henderson - Hasselbalch equation
Sodium acetate is a salt of a weak acid (acetic acid) and a strong base (NaOH). It undergoes hydrolysis in
aqueous solutions.
CH3COONa + H2O → CH3COOH + Na+ + OH−
Acetic acid is weak acid and is partially dissociated whereas NaOH is a strong base and completely dissociated.
According to Henderson equation pH of acidic buffer is:
pH=pKa+log (Salt/Acid)
[Salt] = 0.254M
[Acid] = 50 * 0.122/1000 = 0.0061M
Substitute Values in above equation, we get: -
pH = 4.57 + log (0.254/0.0061)
pH = 4.57 + 0.26874
pH = 4.83
To learn more about Calculate pH of buffer solution
https://brainly.com/question/29573312
#SPJ4
What kind of struggle does Marxism focus on in criticism?.
Marxist criticism focuses on the class struggle, particularly on the bourgeoisie's oppression of the proletariat (the have-nots) (the haves). as a part of its examination of class conflict.
What distinguishes Marxism from Socialism?Socialism is a system where the state owns or controls the means of production for the benefit of all, which is consistent with democracy and allows for a smooth transition from capitalism. Marxism both justifies and foresees the emergence of a classless, stateless society without private property.
What is a good illustration of Marxism?Marx held that capitalists ineluctably paid their employees less than the worth of the things they created. In other words, if a worker requires one pound to feed, clothe, and house themselves.
To know more about Marxism visit:
https://brainly.com/question/3466499
#SPJ4
A 0.250 g sample believed to be copper (Ii) acetate monoydrate required 11.84 mL of 0.105 M Na2S2O3 to reach the endpoint in an iodometric titration. Calculate the experimental percent by mass of copper in the sample and the theoretical mass percent of copper in copper (II) acetate monohydrate.
The mass percent of copper is 28.45 %. In , there are 1 copper atom and 2 bromine atoms.
How do you find the mass percent of copper?To get the mass percent of an element in a compound, multiply the result by 100 after dividing the mass of the element in 1 mole of the compound by the compound's molar mass. In , there are 1 copper atom and 2 bromine atoms.Mass percent = (mass of chemical / total mass of compound) x 100 is the formula for the mass percent of a compound.
Mass of copper= 63.54 g
Mass of copper bromide = 223.37 g
Putting values in above equation, we get:
mass of percentage copper = 63.54/223.37*100
= 28.45%
Hence, the mass percent of copper in copper bromide is 28.45 %.
To learn more about Mass percent refer
https://brainly.com/question/2869822
#SPJ4
in a polar covalent bond: select the correct answer below: electrons are shared unevenly electrons are shared evenly electrons are transferred from one atom to another depends on the elements involved in the bond
When the two atoms in such a covalent polar bond share the bond's electrons unequally.
What is electrons example?The smallest elemental component of an atom, the electron has a negative charge. In a neutral atom, there are an equal amount of protons and electrons. A electrons and one proton are all that the hydrogen atom has. On the contrary hand, the uranium atom possesses 92 protons, which means 92 electrons.
What do electrons do in an atom?The negatively charged components of an atom are called electrons. The total negative charge of an atom's electrons counteracts that positive charge of its protons inside the atomic nucleus.
To know more about electrons visit:
brainly.com/question/22299265
#SPJ4
What are the six parts of a prescription?.
Six parts of prescription includes Name of the drug, dosage , Route taken, amount dispensed, frequency, number of refills .
A medical prescription is an order issued by a qualified health care professional for a treatment and medicines provided to the patients. It states the name and strength of the medication, either as its brand or generic name. In the case of compounded prescriptions, the inscription states the name and strength of active ingredients. The pharmacist will ask if you have visited this pharmacy before. The dosage is the strength of the medication. Most medications are taken orally as pills. It is important to know or indicate the route taken because sometimes the same medication name can be taken different routes—say as a pill or as a cream. That different route may completely change the condition it treats and the price. The amount dispensed is the number of pills or the size of the tube of lotion or cream.
To learn more about Prescription please visit:
https://brainly.com/question/1392739
#SPJ4
Does magnesium and oxygen form ionic bonds?.
Magnesium and oxygen form magnesium oxide as a result of another instance of ionic bonding.
Describe magnesium oxide.Magnesium oxide is a type of the mineral that is frequently consumed as a dietary supplement. Although it has a lesser absorption than that of other forms of magnesium, it might nevertheless be advantageous. Constipation and migraines are its two main uses. In some groups, it might also aid in lowering anxiety, blood sugar, and blood pressure.
What use does magnesium oxide serve?Different applications for magnesium oxide exist. As an antacid, some people take it to treat acid indigestion, sour stomach, and heartburn. In order to quickly and temporarily clear the bowels, magnesium oxide may also be used as a laxative (before surgery, for example). Use of it frequently is not advised.
To know more about magnesium oxide visit:
https://brainly.com/question/1533548
#SPJ4
What are the 4 bases of DNA in order?.
As we know DNA is responsible for the information to be passed from one generation to the next.
Molecule inside the cells containing the genetic information which is responsible for the development and function of an organism is DNA.
DNA or Deoxyribo Nucleic Acid is made up of two polynucleotide chains coiled around each other to form a double helix structure.
It carries the genetic instructions for the development of organisms
that helps in functioning, growth and reproduction of all known organisms and many viruses.
If we look into the structure of DNA, it is a cyclic Ribose sugar that is attached to phosphate group in one side and a nitrogenous base other side as shown in figure.
The four nucleotides, or nitrogenous bases, in DNA are:
Adenine (A),
Cytosine (C),
Guanine (G), and
Thymine (T).
These bases form pairs such that, A with T, and G with C.
To know more about DNA:
brainly.com/question/264225
#SPJ4
