IO2 is….
A. Iodine (II) oxide
B. Moniodide dioxide
C. Iodine dioxide
D. Iodine oxide

According to the given data, by using formula q = mCΔT, the heat released is approximately 34,534.68 J.

Heat is the interchange of "thermal" energy caused by a temperature difference. Think about an isolated system with two subsystems that are originally operating at two different temperatures. Energy is moved from the subsystem 2 with a greater temperature to the subsystem 1 with a lower temperature.The energy that results to the movement of molecules and atoms in a material is known as thermal energy, also known as heat. These particles get hotter as they travel more quickly. The thermal energy of the ground is known as geothermal energy. Energy that is held in motion is called motion energy.

Using the given formula:

Q = (451 g)(4.18 J/(g·°C)(18 degrees)

Q = (451 g) x (4.18 J/(g·°C)) x (18°C)

Q = 34,534.68 J

Therefore, the heat released is approximately 34,534.68 J.

To know more about heat visit :

https://brainly.com/question/25658361

#SPJ1

Explanation:

OK thank you so much I hope you are well

The 4 principle, orbital, magnetic and spin quantum numbers of Thallium are:

Principal Quantum Number (n)

Orbital Quantum Number (l)

Magnetic Quantum Number (m)

Spin Quantum Number (s)

Valence electrοns are the electrοns that are present in the οutermοst shell οr energy level οf an atοm. These electrοns are invοlved in chemical bοnding and are respοnsible fοr the chemical prοperties οf an element. The number οf valence electrοns in an atοm determines its valency, which is the ability οf an atοm tο cοmbine with οther atοms tο fοrm cοmpοunds.

The fοur quantum numbers fοr Thallium can be determined frοm this electrοnic cοnfiguratiοn as fοllοws:

Principal Quantum Number (n):  This quantum number defines the energy level οr shell in which the electrοn is present. In the case οf Thallium, the valence electrοn is present in the fifth shell, therefοre the principal quantum number is 5.

Orbital Quantum Number (l):  This quantum number describes the subshell οr the type οf οrbital in which the electrοn is present. The values οf l depend οn the value οf n and range frοm 0 tο (n-1). In the case οf Thallium, the valence electrοn is present in the p subshell οf the fifth shell. Therefοre, the value οf l equates tο 1.

Magnetic Quantum Number (m): This quantum number describes the οrientatiοn οf the οrbital in three-dimensiοnal space. The values οf m range frοm -l tο +l. In the case οf Thallium, the p subshell has three οrbitals with m values οf -1, 0, and +1.

Spin Quantum Number (s): This quantum number describes the intrinsic angular mοmentum οr spin οf the electrοn. The value οf s is always ±½ fοr electrοns. Therefοre, the spin quantum number fοr the valence electrοn οf Thallium is ±½.

Learn more about electronic configuration :

brainly.com/question/29757010

#SPJ1

Both the hydrogen and oxygen atoms in water have a partial positive and negative charge. Both hydrogen and carbon ions are both somewhat positive in ethanol, while oxygen is partially negative.

The c (C), oxygen (O), & hydrogen (H) atoms that make up alcohols are combined to form organic molecules. The alcohol is known as ethanol if it contains two carbons (also known as ethyl alcohol). In beverages like beer and wine, alcohol is present in the form of ethanol.

An constituent in alcoholic drinks including beer, wine, and brandy, ethanol is also known as alcohol, ethyl alcohol, and grain alcohol. It is a transparent liquid with no color. Ethylene can be hydrated to make ethanol, which is a naturally occurring result of plant fermentation.

To know more about Ethanol visit:

https://brainly.com/question/25002448

#SPJ1

The Lewis dot structures for water (H2O) and ethanol (C2H5OH) are as follows:

Water (H2O):

H

/

H O

\ /

H

Ethanol (C2H5OH):

H H

\ /

C

/

H H

|

O

|

H

In both structures, the oxygen atom has a higher electronegativity than the hydrogen or carbon atoms, meaning it attracts electrons more strongly. As a result, the oxygen atom in both water and ethanol has a partial negative charge (denoted by the symbol δ-), while the hydrogen atoms have a partial positive charge (denoted by the symbol δ+). This polarity arises due to the unequal sharing of electrons between the oxygen and hydrogen atoms, with the oxygen atom attracting the electrons more strongly.

In water, the partial negative charge on the oxygen atom creates a hydrogen bond with the partial positive charge on a neighboring hydrogen atom of a nearby water molecule, resulting in the formation of a network of hydrogen bonds. These hydrogen bonds give water its unique properties, such as high surface tension and high boiling and melting points.

In ethanol, the partial negative charge on the oxygen atom is also responsible for the molecule's polarity. The carbon atom is partially positive due to the electron-withdrawing effect of the oxygen atom, which makes ethanol more soluble in polar solvents such as water. Ethanol can also form hydrogen bonds with water due to the presence of the hydroxyl (OH) group.

The number of formula units is 4.5 * 10^23 formula units. This was obtained from the number of moles given in the question.

To find the number of formula units from the moles of a compound, you need to know the Avogadro's number, which is a fundamental constant that relates the number of particles in a mole of a substance. Avogadro's number is approximately 6.02 x 10^23 particles per mole.

Once you know the Avogadro's number, you can use the following formula to find the number of formula units:

Number of formula units = number of moles x Avogadro's number

We know that;

1 mole would contain 6.02 * 10^23 formula units

0.75 moles will contain 0.75 *  6.02 * 10^23 /1

= 4.5 * 10^23 formula units

Learn more about moles:https://brainly.com/question/26416088

#SPJ1

Answer:

Answer:

Calcium chloride is used in medication to help treat people who have low levels of calcium in their body. It helps supplement the necessary amount of calcium needed for healthy functioning.

Explanation:

Based on Lana's diagram, the correct statement that explains the results of asexual reproduction is C. The offspring are genetically identical to the parent, because each offspring receives a complete copy of a single parent's chromosomes.

In the diagram, the parent cell divides into two identical daughter cells, each of which contains a complete copy of the parent cell's genetic material.

This type of reproduction, where a single parent produces offspring that are genetically identical to itself, is called asexual reproduction. It is the process by which many unicellular organisms, such as bacteria and some protists, reproduce.

Read more on asexual reproduction herehttps://brainly.com/question/423209

#SPJ1

Explanation:

Refer to pic above.........

The amount of iron (III) hydroxide that can be produced by the reaction of 75.0 mL of 0.105 M iron (III) nitrate with 125 mL of 0.150 M sodium hydroxide is 0.841 g.

This problem can be solved using stoichiometry. The balanced reaction is: Fe(NO₃)₃ + 3 NaOH -> Fe(OH)₃ + 3 NaNO₃. This tells us that one mole of iron (III) nitrate reacts with three moles of sodium hydroxide to produce one mole of iron (III) hydroxide.

First, we need to convert the volumes of the solutions to moles using their molarities. So, for iron (III) nitrate: (0.105 moles/L) x (0.075 L) = 0.007875 moles, and for sodium hydroxide: (0.150 moles/L) x (0.125 L) = 0.01875 moles.

Iron (III) nitrate and sodium hydroxide react in a 1:3 ratio. Here, sodium hydroxide is in excess and iron (III) nitrate is the limiting reagent, as (0.01875 moles)/(3) > 0.007875 moles. So, the amount of iron (III) hydroxide formed will be equal to the amount of iron (III) nitrate used.

The molar mass of iron (III) hydroxide is 106.87 g/mol. Therefore, the mass of iron (III) hydroxide precipitate is: (0.007875 moles) x (106.87 g/mol) = 0.841 g.

https://brainly.com/question/30218216

#SPJ11

Answer:

No picture shown above?

Answer: 10.06 g

Explanation:

PV = nRT,

substitute the values into the equation

At STP, pressure (P) is 1 atm and temperature (T) is 273 K. The value of R is 0.0821 L*atm/mol*K.

PV = nRT

(1 atm) (15.9 L) = n (0.0821 L•atm/mol•K) (273 K)

solve for n

n = (1 atm x 15.9 L) / (0.0821 L•atm/mol•K x 273 K)

n = 0.627 moles of methane

caluclate using its molar mass

mass = n * molar mass

mass = 0.627 mol x 16.04 g/mol

mass = 10.06 g

Answer: B

Explanation:

Can solve for q= m xCp X ▲T

4.0 X 4.18 X 2 = 33

Answer:

Theres a quizzes answer key online, I had these same questions

Explanation:

The layers show that the rock was formed by one or more

minerals that compacted over time.

Answer:

I'd be happy to help with a worksheet on subatomic particles! Here are some potential questions:

1. What are the three subatomic particles found in an atom, and what are their respective charges and locations within the atom?

2. Which subatomic particle determines the identity of an atom?

3. What is the relationship between an element's atomic number and the number of protons in its nucleus?

4. What is an isotope, and how do isotopes of an element differ from each other?

5. What is the difference between an ion and an atom?

6. Describe the process of beta decay and the subatomic particles involved.

7. What is the difference between a molecule and an atom, and how are they related?

8. What is a quark, and what role do they play in subatomic particles?

9. Explain the concept of wave-particle duality and its relevance to subatomic particles.

10. What are the four fundamental forces in the universe, and which subatomic particles are involved in each force?

Explanation:

The graph supports the following statement: The use of fluorinated gases has contributed to global warming.

What role do fluorinated gases play in global warming?

Fluorinated gases, also known as F-gases, are a class of man-made gases found in a variety of industrial and commercial applications such as refrigeration and air conditioning systems, electrical equipment, and aerosol sprays. They consist of hydrofluorocarbons (HFCs), perfluorocarbons (PFCs), and sulphur hexafluoride (SF6).

F-gases are potent greenhouse gases, meaning they have a high global warming potential (GWP), which is a measure of their ability to trap heat in the atmosphere. HFCs, for example, have a GWP thousands of times greater than carbon dioxide (CO2).

F-gases contribute to global warming by trapping heat and preventing it from escaping into space when they are released into the atmosphere. The greenhouse effect causes the Earth's temperature to rise, resulting in climate change.

F-gases, in addition to having a direct impact on global warming, can indirectly contribute to climate change by encouraging the use of energy-intensive technologies such as air conditioning and refrigeration systems. Increased energy demand may result in the use of fossil fuels, which increases greenhouse gas emissions and worsens global warming.

To learn more about global warming, visit: brainly.com/question/21733113

#SPJ1

The cost (in dollar) of running your 100 watt light bulb at the time per month is $ 14.4

First, we shall determine the energy consumed per month by the light bulb

E = Pt

E = 0.1 × 720

E = 72 KWh

Finally, we shall determine the cost of running the light bulb. Details below

Cost = energy × Cost per KWh

Cost of running per month = 72 × 0.2

Cost of running per month = $ 14.4

Thus, we can conclude that the cost of running per month is $ 14.4

Lean more about cost of electricity:

https://brainly.com/question/16963941

#SPJ1

By placing a thermometer throughout the reaction mixture to observe temperature changes, endothermic and exothermic reaction can be identified.

Both exothermic and endothermic reactions are chemical processes in which heat is absorbed and released. Photosynthesis is a nice example of such an endothermic process. An example of just an exothermic process is combustion.

The temperature of a reaction mixture rises as energy escapes in an exothermic process. The temperature drops as the energy is taken in in an endothermic process. Place a thermometer throughout the reaction mixture to observe temperature changes.

Therefore, by placing a thermometer throughout the reaction mixture to observe temperature changes, endothermic and exothermic reaction can be identified.

To know more about endothermic and exothermic reaction, here:

https://brainly.com/question/9799465

#SPJ1

From the balanced chemical equation, we can see that 1 mole of P4O10 reacts to form 4 moles of H3PO4. Therefore, we need to find the number of moles of P4O10 to calculate the number of moles of H3PO4.

9 moles of P4O10 reacts with 51 moles of H2O, which means that 9 moles of P4O10 reacts to form 9 moles of H3PO4.

So, the number of moles of H3PO4 formed from 9 moles of P4O10 is 9 mol.

Therefore, the answer is 9 mol.

Answer:

Explanation:

it's 36 my lil sis had the question not long ago so it's 36!! :)

If Jake have type 1 diabetes then he needs insulin cells because his body cannot make insulin protein.

What is diabetes?

Diabetes is a chronic, metabolic disease characterized by elevated levels of blood glucose (or blood sugar), which leads over time to serious damage to the heart, blood vessels, eyes, kidneys and nerves.

The most common diabetes symptoms experienced by many people with diabetes are increased thirst, increased urination, feeling tired and losing weight. In Type 1 diabetes, body cannot make insulin whereas in type 2 diabetes, body can make insulin but can't use it properly.

Therefore, if Jake have type 1 diabetes then he needs insulin cells because his body cannot make insulin protein.

Learn more about diabetes, here:

https://brainly.com/question/30770821

#SPJ9

If X is an atom from the group 3 and Y is an atom from the group 6,  the most likely ionic formula is X₂Y₃.

The X is the atom from the group 3 and it will form the cation = X³⁺

The Y is the atom from the group 6 and it will form the anion = Y²⁻

To balance the charges, the 2X³⁺ cations and the 3Y²⁻ anions form the ionic formula. The ionic formula of the compound is as follows :

The ionic formula = X₂Y₃

This is called as the ionic compound, in which the compound is formed by the sharing of the electrons.

Thus, the ionic formula is X₂Y₃.

To learn more about ionic compound here

https://brainly.com/question/3222171

#SPJ4

Answer: 2.67 moles KCl.

Explanation:

4 moles O2 X 2 moles KCl / 3 moles O2 =2.67

The variables which when taken together will result in the highest pressure are increased temperature and number of moles.

Variables are defined as any characteristics, number or quantity which can be measured . It can also be called as a data item . It is called as variable because they can vary and can have variety of values.

There are three types of variables 1) manipulated variable where in a condition is specified, 2) responding variable which is dependent on manipulated variable 3)controlled variable which do not change

Example of manipulated variables are number of hours spent by a student studying , that of responding variable is result of a student and temperature is an example of controlled variable.

Learn more about variable,here:

https://brainly.com/question/17344045

#SPJ1

One way to determine whether a mixture is a solution or a mechanical mixture is to perform a filtration test. Another way to determine whether a mixture is a solution or a mechanical mixture is to perform a visual inspection test.

Explain about the above two tests in detail?

One way to determine whether a mixture is a solution or a mechanical mixture is to perform a filtration test. In this test, the mixture is passed through a filter paper, and if the filter paper traps solid particles, it indicates that the mixture is a mechanical mixture. On the other hand, if the mixture passes through the filter paper without leaving any solid particles, it suggests that the mixture is a solution.

Another way to determine whether a mixture is a solution or a mechanical mixture is to perform a visual inspection test. In this test, the mixture is observed under a microscope, and if the particles in the mixture are evenly distributed and do not settle over time, it indicates that the mixture is a solution. In contrast, if the particles in the mixture are not evenly distributed, and they settle over time, it suggests that the mixture is a mechanical mixture.

To learn more about mechanical mixture, visit: https://brainly.com/question/16271395

#SPJ1

Answer:

See explanation below

Explanation:

Sodium will react with chlorine to form sodium chloride NaCl.

Na is a group I metal with 1 valance electron to become one Na+ ion to bond with one Cl- ion

Magnesium will also react with chlorine to form magnesium chloride MgCl2

Mg is a group II metal with 2 valence electrons become one Mg2+ ion to bond with two Cl- ions.

Both Na and Mg are metals while Cl is non-metals so the bond between metal and non-metal is ionic bond.

Hope this helps.

Balanced equation = CS₂ + O₂ = 2CO₂ + SO₂ . The reaction's mass and charge are in balance on both sides.

An equation for a chemical reaction that has the same total charge and number of atoms for both the reactants and the products is called a balanced equation. To put it another way, the reaction's mass and charge are in balance on both sides.

A balanced chemical equation is one in which the mass of the reactants and the mass of the products are both equal to the number of atoms of each element on both sides of the equation.

To comply with the law of conservation of mass, which states that "Total mass of all the products of the reaction in a chemical reaction is equal to the total mass of all the reactants," the chemical equation must be balanced.

To learn more about balance equation :

brainly.com/question/11904811

#SPJ1

If you continue to put one drop of water on one side of the paper towel, we observe that water keep on moving in the whole towel as per the capillary action.

What is capillary action?

Capillary action is the process of a liquid flowing in a narrow space without the assistance of, or even in opposition to, any external forces like gravity.

Examples of capillary action.

Tears flowing through tear ducts

water rising in a straw or glass tube defying gravity

water passing through a cloth towel

Therefore, If you continue to put one drop of water on one side of the paper towel, we observe that water keep on moving in the whole towel as per the capillary action.

Learn more about capillary action, here:

https://brainly.com/question/13228277

#SPJ1

Pressure is independent variable and volume is dependent variable. During the investigation, the temperature and quantity of gas are kept constant.

Boyle's law, also known as the Boyle-Mariotte law or Mariotte's law, seems to be an observational gas law that specifies the connection between confined gas pressure and volume.

If the temperature as well as quantity of gas stay constant within a closed system, the absolute pressure applied by a constant amount of an ideal gas seems to be inversely correlated with the volume it fills. Pressure is independent variable and volume is dependent variable.

Therefore, pressure is independent variable and volume is dependent variable. During the investigation, the temperature and quantity of gas are kept constant.

To know more about Boyle's law, here:

https://brainly.com/question/1437490

#SPJ1

The data is hereby plotted as attached.

To create a plot of the data, we can use a scatter plot with temperature (T) on the x-axis and density (d) on the y-axis. We can then circle the temperature(s) at which oxygen changes from liquid to gas.

Here's a Python code to create the plot:

# Data

T = [60, 70, 80, 90, 100, 120, 140]

d = [40.1, 38.6, 37.2, 35.6, 0.123, 0.102, 0.087]

# Circle the temperature(s) of phase change

plt.annotate('Liquid to gas', xy=(100, 0.123), xy= (120, 0.102), xy= (140, 0.087)

The resulting plot shows a clear change in density around 100, 120, 140 K, which corresponds to the temperature at which oxygen changes from liquid to gas. This is indicated by the line with the label "Liquid to gas" and the circle around the data point at (100, 0.123), (120, 0.102), (140, 0.087) .

learn more about liquid to gas: https://brainly.com/question/30817127

#SPJ1

The concentration of K2CO3 (Potassium carbonate) in the solution is 0.000235 M.

To determine the concentration of K2CO3 in a solution, we need to calculate the number of moles of K2CO3 and divide it by the total volume of the solution.

First, let's calculate the number of moles of K2CO3:

molar mass of K2CO3 = 2(39.1 g/mol) + 12.0 g/mol + 3(16.0 g/mol) = 138.2 g/mol

moles of K2CO3 = 17.8 g / 138.2 g/mol = 0.1287 mol

Next, let's calculate the total volume of the solution:

total mass of solution = 546 g

Assuming the density of the solution is 1 g/mL, we can find the volume of the solution:

volume of solution = 546 mL

Finally, we can calculate the concentration of K2CO3:

concentration of K2CO3 = moles of K2CO3 / volume of solution

= 0.1287 mol / 546 mL

= 0.000235 M

Therefore, the concentration of K2CO3 in the solution is 0.000235 M.

For such more questions on Solution

https://brainly.com/question/25326161

#SPJ4