Is Na and O ionic or covalent?.

A liquid with stronger intermolecular forces will have a  lower vapor pressure at a given temperature and thus a higher boiling point.

Intermolecular forces can be described as the forces that are present between the atoms of a molecule.

When the intermolecular forces are strong, it will not be easy to break these forces between atoms such that they begin to vaporize. As there will be lesser molecules breaking the bonds and vaporizing, the vapor pressure will be lower for molecules that have strong intermolecular forces.

As it will take high energy or heat to break the bonds in a molecule that has strong intermolecular forces, hence the boiling point in these liquids will be higher.

To learn more about boiling point, click here:

https://brainly.com/question/40140

#SPJ4

As stated in the preceding statement. Due to the stability of noble gases, incandescents have the highest EA.

A opposite charges subatomic particle known as an electron can either be free or attached to an atom (not bound). One of three principal types of atoms within about an atom is an ion that is bonded to it; an other two are neutrons and neutrons.

The smallest elemental component of an atom, the electron has a negative charge. In a neutral atom, there are an adequate amounts of protons and electrons. One atom or one proton are all that the hydrogen atom has. Contrarily, the nucleus of an atom possesses 92 protons and

To know more about electron electron visit:

https://brainly.com/question/18367541

#SPJ4

Amount of  60co will remain from an initial sample of 6.40 grams after 10.0 years is 0.0009765625g.

The 1/2-life of a response is the time required for the reactant awareness to decrease to at least one-half of its preliminary fee. The 1/2-life of a first-order response is a consistent this is associated with the charge constant for the reaction: t1/2 = 0.693/k. Radioactive decay reactions are first-order reactions.

Amount left after 1 half-life = (original amount)(1/2)

Amount left after 2 half-lives = (amount left after one half-life)(1/2) = (original amount)(1/2)(1/2)

Amount left after 3 half-lives = (amount left after two half-lives)(1/2) = (original amount)(1/2)(1/2)(1/2)

As you can see, the amount left after n half-lives will be the original amount times 1/2 n times, or

Amount left after n half-lives = (original amount)(1/2)^n

For 4 half-lives and 1g original amount, we therefore have:

Amount = (1g)(1/2)^4

= 1/16

= .0625g

For 10 half-lives, we have:

Amount = (1g)(1/2)^10

= 1/1024

= 0.0009765625g.

(A) .5g

(B) .25g

(C) .0625g

(D) 0.0009765625g

A 1/2-life is the time taken for something to halve its quantity. The time period is most customarily used inside the context of radioactive decay, which occurs while unstable atomic debris lose electricity. Twenty-nine factors are regarded to be able to present process this manner.

Learn more about  half-life here:-https://brainly.com/question/25750315

#SPJ4

Disclaimer:- your question is incomplete, please see below for the comlete question.

Cobalt-60 has a half-life of 5.26 years. If 1.00 g of 60Co were allowed to decay, how many grams would be left after

a. one half-life?

b. two half-lives?

c. four half-lives?

d. ten half-lives?

There had to have been 0.10 mol of C₆H₁₂O₆ in the container.

The above reaction clearly indicates that when 1 mol of C₆H₁₂O₆ and 2 mol of CO₂ are combined and O₂ is given in excess, this combination alone determines the development of a product. Therefore, C₆H₁₂O₆ is a limiting reactant and O₂ is an excess reactant in this reaction.

To make 1 mol of CO₂ from 0.05 mol of C₆H₁₂O₆, it takes 6 times as much C₆H₁₂O₆.

Now, 0.60 moles of CO₂ must be produced from 0.6 divided by 6 mol of reactant, which equals to

moles of  C₆H₁₂O₆ = 0.6/6 = 0.1 mol

Therefore, the initial amount of C₆H₁₂O₆ in the container must have been 0.10 mol.

To learn more about Reactions :

https://brainly.com/question/28628374?referrer=searchResults

#SPJ4

Be2 < C2 < N2 is correct order of bond order.

To verify the accuracy of any chemical structure, we use the octet rule, which stipulates that all atoms in a compound are expected to abide by. In the model of carbon IV oxide, every atom precisely satisfies the octet rule. Each atom in the molecule has eight electrons surrounding its valence shell. Given the overall number of bonds and electrons, as well as the fact that CO2 contains sixteen valence electrons, we can thus conclude that this structure is correct.

It has a negative charge that is comparable to its negative charge, which is 1.602176634 coulombs, the fundamental unit of electric charge. Only 1/1,836 the mass of a proton, or 9.1093837015 10-31 kg, makes up the rest mass of an electron.

To know more about   bonds visit : brainly.com/question/13190131

#SPJ4

Due to the faster-moving aluminum bar's component particles, its temperature is higher than a gold bar's. The metal bar's constituent particles are traveling more slowly.

The physical concept of temperature indicates in numerical form how hot or cold something is. A thermometer is used to determine temperature. Thermometers are calibrated using a variety of temperature scales, which historically defined distinct reference points and thermometric substances.

Each of us has to understand what heat and temperature mean on a daily basis. The temperature of the day affects how we dress in the morning, and the majority of what we do takes energy, which ultimately comes from the Sun. Thermodynamics is a branch of physics that studies heat and temperature.

Thus, a bar gold has higher temperature than a bar aluminum.

To learn more about temperature, follow the link;

https://brainly.com/question/11464844

#SPJ1

Identify the NMR term that corresponds to each description :

The are of signal which is corresponds to the nuclei at that frequency is known as the integration. The chemical shift is the difference between the resonance frequency and the tetramethylsilane  in terms of part per million.

The splitting of the peaks causes in the presence of the proton to the magnitude of  n+1 , n is the number if neighboring proton. splitting is known as the appearance of the multiple peaks. If the end of the NMR spectrum signals are far from the reference then its is down field. when the signals appear close to the reference signal then it is up field.

Thus, Identify the NMR term that corresponds to each description :

The area of a signal that corresponds to the number of nuclei at that frequency = Integration

The frequency at which a nucleus absorbs and resonates with a magnetic field = Chemical shift

The appearance of multiple peaks for a single nucleus due to neighboring nuclei = Splitting

The end of the NMR spectrum close to the reference signal = Upfield

The end of the NMR spectrum far from the reference signal = Downfield

To learn more about NMR here

https://brainly.com/question/18301818

#SPJ4

the square root of nth root symbol, which is used in mathematics. Square-root-containing expressions are known as radical expressions. Radicand: A number or statement contained within the radical symbol.

Square root and nth roots are represented by the symbol "radical," which. a square root is a component of a radical expression, which is an expression. Radicand: The value or expression contained on the inside of the radical symbol. An equation that uses radical expressions as radicands and contains variables is referred to as a radical equation.

Among some examples of radicals expressions are 2, 3 72, 2 x + 7, and 4 1 p. We will examine radical expressions in-depth today, including how to create and analyze them as well as how to use their characteristics to our advantage.

To know more about  radical expression visit:

https://brainly.com/question/3796764

#SPJ4

Answer:

[tex] \huge\fbox{2.34}[/tex]

Explanation:

Potassium (K): It is an alkali metal that lies in Group 1 of the periodic table, with an atomic number and electronegativity 19 and 0.82, respectively. There is only one electron in the outermost shell of potassium, so it prefers donating one electron to gain stability, and hence the tendency to pull or accept an electron is less in potassium. 

Chlorine (Cl): It is an halogen that lies in group 17 of the periodic table, with an atomic number and electronegativity of 17 and 3.16, respectively. There is only one electron required to fulfil the outermost shell of chlorine, so it prefers accepting one electron, and hence the tendency to attract the electron is high for chlorine.

Electronegativity Difference of K and Cl = En of Cl- En of K

[tex]ED = 3.16 - 0.82[/tex]

[tex]ED = 2.34[/tex]

The electronegativity difference explains whether a compound is ionic or covalent. 

[tex]\sf \small \pink{Thanks }\: \green{for} \: \blue{joining} \: \orange{brainly } \: \red{community}![/tex]

[tex]\Large\bold{SOLUTION}[/tex]

The electronegativity difference between potassium (K) and chlorine (Cl) can be calculated by subtracting the electronegativity value of K from the electronegativity value of Cl.

The electronegativity of potassium is 0.82 and the electronegativity of chlorine is 3.16 (on the Pauling scale).

[tex]\sf Difference_{(Electronegativity)} = CI_{(Electronegativity)} - K_{(Electronegativity)}[/tex]

[tex]\sf Difference_{(Electronegativity)} = 3.16 - 0.82[/tex]

[tex]\sf Difference_{(Electronegativity)} = 2.34[/tex]

Therefore, the electronegativity difference between K and Cl is 2.34.

[tex]\rule{200pt}{5pt}[/tex]

The electronic configuration of Al3+ is 2,8.

To learn more about electronic configuration refer to:

https://brainly.com/question/26084288

#SPJ4

Moving over a period in the periodic table from left to right causes an increase in the electronegativity of elements. This is because when you move across a periodic table, left to right.

The atoms' attraction to the valence electrons grows as the nuclear charge expands faster than electron shielding can keep up. The tendency of an atom of a certain chemical element to draw shared electrons (or electron density) when forming a chemical connection is known as electronegativity and is represented by the symbol. The atomic number of an atom and the separation of its valence electrons from the charged nucleus both have an impact on how electronegativity of an atom is. A tabular representation of the chemical elements is known as the periodic table, or periodic table of the (chemical) elements.

Learn more about periodic table here

https://brainly.com/question/11155928

#SPJ4

1. Forgot DNA stain: gel looks empty

2. Forgot restriction enzyme: very long fragment on gel

3. Forgot power supply: gel looks empty

4. Forgot molecular weight marker : DNA fragment looks normal

5. Forgot to add DNA: gel looks empty

6. Selected restriction enzyme has no restriction sites in DNA: very long fragment on gel

What is gel electrophoresis?

Gel electrophoresis is an experimental method for separating mixtures of DNA, RNA, or proteins by molecular size. In gel electrophoresis, molecules to be separated are forced into a gel containing small pores by an electric field. Molecules pass through gel pores at a velocity inversely proportional to their length. This means that small DNA molecules travel a longer distance in the gel than larger DNA molecules.

Steps of gel electrophoresis:

There are several basic steps to performing gel electrophoresis that will be described below;

1) Pouring the gel,

2) Preparing your samples,

3) Loading the gel,

4) Running the gel (exposing it to an electric field) ,

5) Staining the gel.

To know more about gel electrophoresis, check out:

https://brainly.com/question/6885687

#SPJ4

5.83 x 10^20 Cu atoms

Melting is an example of convection.

Conduction can be understood as the process, which generally enables direct transfer of heat through the matter, this happens due to the difference in temperature, between adjacent parts of the object. It happens when the temperature of the molecules present in a substance increase, that is usually resulting in vigorous vibration.

Convection implies the form of heat transfer, by the real movement of matter, that usually occurs only in fluids. Fluid represents to any substance, whose molecules move freely from one place to another, such as liquid and also gases. It happens naturally or even forcefully.

The heat transfer mechanism in which there is no medium is required is called radiation. It refers to the movement of heat in waves, as it does not need any molecules to travel through.

Convection is a method of heat transfer that involves molecules within liquids such as gases and also liquid, It is best depicted by the melting ice, where snow melts as heat moves from the air to the ice. If we leave ice on the table, it will melt after sometime. The reason for this is that the surrounding area has become cold. Thus, cold transfer refers to the exchange of heat or also thermal energy between physical systems. When there is a difference in temperature between the two bodies, the ice is transferred from the colder body to the warmer body.

Hence, ice melting is an example of convection.

To know more about convection

https://brainly.com/question/18204453

#SPJ4

The electronic configuration of Silver is [Kr][tex]4d^{10}5s^{1}[/tex]

The electron configuration of an element generally describes how electrons are distributed in its atomic orbitals. Electron configurations of atoms follow a standardized rules in which all electron-containing atomic subshells along with the number of electrons they hold written in superscript form and they are placed in a sequence

However, the standard notation often yields lengthy electron configurations especially for elements having a relatively large atomic number . In such cases, an abbreviated or condensed notation may be used instead of the standard notation. In the abbreviated notation, the sequence of completely filled subshells that are corresponding to the electronic configuration of a noble gas is replaced with the symbol of that noble gas in square the brackets.

Atomic number of silver is 47, and the condensed electronic configuration can be written as [Kr][tex]4d^{10}5s^{1}[/tex]

To know more about electronic configuration

https://brainly.com/question/19589767

#SPJ4

By donating or sharing one electron with another atom or a molecule such as water.

By exchanging electrons, atoms form chemical bonds. This is determined by how many electrons make up an element's electron clouds. The valence number is equivalent to the number of accessible electrons in the outermost electron cloud. The electrons that are most suitable for forming chemical bonds are called valence electrons. These valence electrons can be shared with another atom to fill open energy levels in a covalent bond. In spite of the fact that this outermost level possesses eight potential electrons, the resulting chemical is an inert noble gas when all eight electrons are present. Atoms that don't have eight electrons in their outermost shells will join forces with other atoms to share the extra pair of electrons until they have eight.

Learn more about atom here:

https://brainly.com/question/19556990

#SPJ4

Answer:

A) Constructional isomers

specifically functional group isomers

The given compounds are constitutional isomers. This is because their parent chain is the same but the position of the alkyl group in the two compounds is different. So option A is correct.

The molecular formula of the constitutional isomers is the same as that of the other isomers, but the connectivities are different. For example, n-butane is a constitutional isomer, as are the functional groups of ethanol, dimethyl ether, etc.

The simplest way to determine whether a molecule is a constitutional isomer is to count the number of carbon atoms and the degree to which hydrogen has been unsaturated. If all of the atoms are identical and the molecules have the same hydrogen deficiency index, then the molecules are constitutional.

To learn more about an alkyl group, refer to the link:

https://brainly.com/question/9872968

#SPJ6

The hexane(C₆H₁₄) is an alkane which has general molecular formula C_nH_2n+2 and it is soluble in benzene and decane(C₁₀H₂₂).

Non-polar compounds are the compounds which do not show the polarity and they cannot form any ions in a solution. In a given options, formula of benzene is C₆H₁₂, oil contains hydroxyl groups in it which are polar. Methanol is also polar in nature due to the hydrogen bond. KCl is a polar compound which forms K⁺ and Cl⁻ ions. According to the principle of like dissolves like, if any substance is polar it should be soluble in polar substance. If any substance is non-polar, then it should be soluble in non-polar. Hence, the compound hexane(C₆H₁₄) is soluble in only benzene and decane(C₁₀H₂₂).

Therefore, hexane(C₆H₁₄) is soluble in benzene and decane(C₁₀H₂₂). Hence, option c and e is correct.

To know more about solubility of a compound

https://brainly.com/question/15215632

#SPJ4

The volume of ammonia would be produced by this reaction if of hydrogen were consumed the extent of ammonia that could be produced with the aid of using this response if 6.9 m3 of hydrogen had been fed on is 4,600.064cm³.

Read more about the ammonia gas:

https://brainly.com/question/7982628

#SPJ4

The substrate is primary and it would undergo SN2 reaction.

We know that a nucleophilic substitution reaction is said to occur when a leaving group in a compound is attacked by a nucleophilic substitution. The attack of the nucleophile would cause the cause a positive charge to begin to develop on the carbon atom that is bearing the leaving group.

This nucleophilic reaction could occur in two ways;

Unimolecular mechanism SN1

Bimolecular mechanism SN2

In the bimolecular mechanism, the leaving groups attacks and begins to attach itself to the nucleophile even  before the leaving group is finally off the substrate. This is common when we have a primary carbon atom or a secondary carbon atom and a strong nucleophile.

Learn more about nucleophilic substitution:https://brainly.com/question/28325919

#SPJ1

To produce electrons with higher kinetic energy per electron, the experimenter should increase the intensity and the wavelength of the light.  In order to decrease the energy of each photon we need less frequency (ν) which means increased wavelength (λ) for the incoming light. The intensity has to be increased since it is directly proportional to the number of photoelectrons emitted.

The energy of a particular photon can be calculated using Planck's equation:

E = hν

Here, E = Energy of a photon in joules (J)

h = Planck's constant (6.626×10⁻³⁴J⋅s)

ν = Frequency of light (Hz)

The photoelectric effect is a phenomena whereby electrons can be released from the surface of a metal when light strikes upon it. The electrons that are released from the metal are known as photoelectrons, and this process is also frequently called photoemission. The Kinetic energy (KE) of each photoelectron is given by KE = hν – Φ.

E (i.e, the total energy of the incoming photon) must be equal to the KE (i.e, the kinetic energy of the ejected electron) plus the energy required to eject the electron from the metal which is also called the work function (Φ).

E = KE + Φ

The value of Φ also changes depending on the metal. Writing the energy of the photon in terms of Planck's equation we get:

E = hν = KE + Φ

By rearranging this equation in terms of the kinetic energy of electrons, we get:

KE = hν – Φ

To know more about wavelength please click here https://brainly.com/question/10750459

#SPJ4

The balanced chemical equation for the fermentation of glucose, we can see that methanol and carbon dioxide are formed.

Fermentation, is generally a  chemical process by which molecules such as glucose are broken down anaerobically or in the absence of water. More broadly we can understand that fermentation is the foaming that occurs during the manufacture of wine and beer, a process at least 10,000 years old.

Fermentation occurs in yeast cells, and a form of fermentation takes place in bacteria and in the muscle cells of the animals. In yeast cells these are those yeast used for baking bread and also that are producing alcoholic beverages, glucose can be metabolized through cellular respiration as in other cells too.

The balanced chemical equation for the fermentation of glucose is as follows;

[tex]C_{12}H_{22}O_{11}[/tex] + [tex]H_{2}O[/tex] → [tex]4C_{2}H_{5}OH[/tex] + [tex]4CO_{2}[/tex]

To know more about balanced chemical equation

https://brainly.com/question/28294176

#SPJ4

An organic acid is lactic acid. Its chemical formula is CH3CH(OH)COOH.

Lactic acid (lactate) and NAD+ are produced during lactic acid fermentation. To enable glycolysis to continue and produce additional ATP, NAD+ cycles back.

Most sour milk products, including kumis, laban, yoghurt, kefir, and some cottage cheeses, contain lactic acid. Lactic acid causes the casein in fermented milk to coagulate, or "curdle." Additionally, lactic acid is in charge of giving sourdough bread its distinctive taste.

One of the organic acids is lactic acid. Lactic acid has the chemical formula C3H6O3. It is a chiral molecule as it contains two optical isomers, Levo and Dextro.

learn more about lactic acid refer

https://brainly.com/question/490148

#SPJ4

The number of moles of carbon dioxide is 0.05 mol.

A molecule of CO2 contains one carbon atom and two oxygen atoms. One mole of CO2 contains one mole of carbon atoms and two moles of oxygen atoms. The mass of one atomic mole of an element equals the atomic mass in grams, and the molecular mass of an element or compound equals the sum of the atomic masses of each type of its constituent atoms.

Therefore, the mass of one mole of a molecule of an element or compound equals its molecular weight in grams. The number of grams in moles depends on the substance you have. To calculate it, find the atomic or molecular mass of the substance and multiply it by the number of moles.

Learn more about Carbon dioxide here:-https://brainly.com/question/25385913

#SPJ4

In the US, only iron is required to be added to products made from enhanced grains. Iron and B vitamins are among these replenished nutrients (folic acid, riboflavin, niacin, and thiamine).

Additional calcium may be taken. mineral must be included in enhanced grain products. When a grain product has the word "enriched," it must have specific levels of the vitamins niacin, iron, thiamine, riboflavin, and folic acid.

Products that are useful for the manufacturing of ethanol and animal feed, respectively, include increased fiber-enriched grain products or vitamins and enhanced fiber-reduced grain products or materials, boosted in fat content, protein content, or both.

The chemical element iron has the atomic number 26 and the letter Fe, which comes from the Latin word forum. It is a metal that is a member of group 8 and the first transition series of the periodic table is called iron.

Learn more about iron here

https://brainly.com/question/18500540

#SPJ4

Using this Td = T - ((100 - RH)/5.) we can calculate the  approximation of dew point temperature.

The dew factor is the temperature the air desires to be cooled to (at regular stress) in order to achieve a relative humidity (RH) of one hundred%. At this point the air can't maintain greater water inside the fuel shape.

In other words, it enables meteorologists discern out the amount of moisture inside the air. Once the dewpoint reaches the air temperature, the air can't keep any greater water vapor. it's at this point that fog, dew, or any kind of precipitation may additionally form.

The dew factor is laid low with humidity. when there may be more moisture within the air, the dew point is higher.

Learn more about Dew point here:-https://brainly.com/question/12485698

#SPJ4

The four stages of fire are ignition, growth, fully developed, and decay.

Combustion is the chemical process of “burning” while fire is a reaction that is usually involving the bonding of oxygen with carbon or other fuel, with the production of heat and the presence of flame. The original substance is called the fuel, and the source of oxygen is called the oxidizer.

There are four stages of fire development: ignition, growth, fully developed, and decay.

The ignition stage is when all the four elements of the fire tetrahedron coalesce, the fuels reach their ignition temperature, and then the fire begins. During the growth stage, the fire increases fuel consumption and creates more and more heat and smoke. The fully developed stage occurs when the maximum amount of fuel and oxidizers are consumed, and the highest heat released and  is produced. Then the temperature decreases and intensity is reduced during the decay stage, which happens when the available fuel has been consumed.

To know more about stages of fire

https://brainly.com/question/25748682

#SJP4

The reactivity of the double bond is affected by the presence of substituents. Electron-withdrawing groups make it more reactive, while electron-donating groups make it less reactive.

The presence of the double bond causes some structural differences between alkanes and alkenes. Alkenes are not as dense as alkanes, and the double bond creates a dipole that can be exploited by other molecules.

Cycloalkenes are alkenes that have cyclic structures. The cyclic structure makes them more stable than the linear structure of alkanes. The cyclic structure also provides additional sites for substitution, which affects the reactivity.

Cycloalkenes have cyclic structures with a ring of carbons and a double bond.

The reactivity of the double bond is affected by the presence of substituents. Electron-withdrawing groups make it more reactive, while electron-donating groups make it less reactive.

The presence of the double bond causes some structural differences between alkanes and alkenes. Alkenes are not as dense as alkanes, and the double bond creates a dipole that can be exploited by other molecules.

Learn more about Cycloalkenes :

https://brainly.com/question/14356149

#SPJ4

In the following diagram, identify and label two conjugate acid-base pairs. Identify the acid and the base in each pair.

What is the importance of acid?

Acids play significant roles within the human body. The presence of hydrochloric acid in the stomach helps digestion by breaking down large and complex food molecules. Amino acids are required for protein synthesis which helps to grow and repair body tissues

How do you identify acids and bases?

To decide whether a substance is an acid or base, count the hydrogens on each substance before and after the reaction. If the number has decreased that substance is the acid (which donates hydrogen ions) . If the number of hydrogens has increased that substance is the base (accepts hydrogen ions)

To know more about acid visit:

https://brainly.com/question/14072179

#SPJ4

The theoretical total number of ATP molecules, per one molecule of glucose, obtained from complete oxidation in the presence of oxyge is 38

Determining the exact yield of ATP for aerobic respiration is difficult due to number of reasons. In addition to generating ATP by oxidative phosphorylation in prokaryotic cells, proton motive force is also used for functions such as transporting materials across membranes and also  rotating flagella.

Furthermore, the number of ATP generated per reduced NADH or FADH2 is not always a whole number. For every pair of electrons transported to the electron transport chain by a molecule of NADH, between 2 and 3 ATP are generated. For each pair of electrons transferred by FADH2, between 1 and 2 ATP are generated.

In eukaryotic cells, unlike in that of prokaryotes, NADH generated in the cytoplasm during glycolysis must be transported across the mitochondrial membrane before it can transfer electrons to the electron transport chain and this requires energy. As a result, between 1 and 2 ATP are generated from these NADH as well

In eukaryotic cells, the theoretical maximum yield of ATP generated per glucose is 36 to 38, depending on how the 2 NADH generated in the cytoplasm during the process of glycolysis enter the mitochondria and whether the resulting yield is 2 or 3 ATP per NADH..

To know more about ATP molecules

https://brainly.com/question/12277357

#SPJ4