Ghosts are frequently used as metaphors for the need for justice since they are seen as supernatural echoes of a moral injustice.
What does the Ghost in Hamlet stand for? Hamlet's father's ghost makes an unsettling revelation and seeks retribution in Shakespeare's tragedy Hamlet.It is customary to interpret ghosts as metaphors for the desire for justice because they are seen as supernatural reminders of a moral injustice.Inspiring Hamlet to exact his father's retribution is the ghost, a symbol.The ghost makes his first entrance, which starts the entire plot's action.Hamlet learns the truth from the ghost's warnings and becomes enraged enough to exact revenge on his father after they turn out to be true.Act 1, Scene 2 of Hamlet's first soliloquy features an insightful metaphor that reads as follows: "This unweeded garden is going to seed.Things foul and repulsive in nature / Just possess it."Hamlet muses over the recent happenings in Elsinore in this despondent monologue.To learn more about Hamlet refer
https://brainly.com/question/806658
#SPJ4
a(n) is a homogenous volume of air defined based on its temperature, and moisture characteristics.
An air mass is a homogenous volume of air defined based on its temperature, and moisture characteristics.
What is air mass ?An air mass is a volume of air whose temperature and humidity are specified. Many hundreds or thousands of square miles are covered by air masses, which adjust to the properties of the land underneath them. Latitude and their continental or marine source regions are used to categorize them.
When the atmosphere comes into touch with a sizable, uniform land or sea surface for a period of time long enough for it to absorb the surface's temperature and moisture characteristics, an air mass is created. Major air masses on Earth have their origins in polar or subtropical latitudes.
Thus, An air mass is a homogenous volume of air defined based on its temperature, and moisture characteristics.
To learn more about air mass, follow the link;
https://brainly.com/question/28709357
#SPJ1
the contract is unacceptable in its current form; revision is required. please revise the contract so it can be forwarded to the vice president. this contract is a mess; fix it before the vice president sees it.
Please update the contract in accordance with the provided information so that it can be sent to the vice chairman.
What is the most recent short definition?The pace at which electrons pass a certain point in a fully functional electrical circuit is referred to as rate. Fundamentally, current is the same as flow. The ampere (AM-pir), also called to as an amp, is the standard measurement unit used throughout.
How would you characterize electric current?When describing how much electrical flows through a network and exactly how it flows inside of an integrated device, the term "electric current" is often employed. It is measured in amperes (A). The ampere number increases with the amount of flow of energy all across circuit.
To know more about Current visit:
https://brainly.com/question/23323183
#SPJ4
Identify the element with the highest standard free energy of formation.
Group of answer choices
Mn(s)
All elements in their standard states have a value of zero.
K(s)
Ba(s)
Mg(s)
The element with the highest standard free energy of formation is All elements in their standard states have a value of zero.
The correct answer is All elements in their standard states have a value of zero.
What is free energy of formation?The standard free energy of formation of a substance is defined as the free-energy change which results when 1 mol of substance is prepared from its elements at the standard pressure of 1 atm and a given temperature, usually 298 K.
At 25^∘ C , the free energy of formation of H2O (l) is - 56700 cal/mol while that of its ionization to H^ + and OH^ - is 19050 cal mol^-1.
Learn more about free energy of formation at: https://brainly.com/question/14415025
#SPJ1
A mixture of nitrogen, oxygen, fluorine, and neon are in a container which has a tiny, tiny pinhole leak. Which element leaks the slowest from the container?.
A mixture of nitrogen, oxygen, fluorine and neon are in a container which has a tiny, tiny pinhole leak. The slowest element to leave the container is fluorine.
Gas output is expressed as:
Rate ∝ 1 / √M
rate of effusion is inversely proportional to the square root of the molecular weight.
molecular weight of nitrogen = 14amu
molecular weight of oxygen = 16 amu
Molecular weight of fluorine = 19amu
The rate of effusion with increasing molecular weight. Fluorine is therefore the element that escapes the slowest from the container. There is a mixture of nitrogen, oxygen, fluorine and neon inside the container with a very small leak. elements fluorine are the slowest to leak out of the container
Click here to learn more about effusion
https://brainly.com/question/8804761
#SPJ4
calculate the moles of co2 produced when 3.12 moles of c4h10 are allowed to react with 12.69 moles of o2.
The statement above may result in 7.82 moles if carbon dioxide being produced.
What produces the most CO2?The use of fossil fuels including coals, natural gas, or oil is one of the major sources of dioxide emissions, accounting for 87 percent of all emissions produced by humans. The burning of fossil fuels is the major human emission source of carbon dioxide.
Briefing:The chemical process looks balanced like this:
2C₄H₁₀(g)+13O₂(g)→8CO₂(g)+10H₂O(g)
Since 1 mole if butane combines using 13 moles or oxygen in the reaction described above, 3.5 moles for butane will need:
Required moles of O₂=3.12×13mol
Required moles of O₂=40.5mol
moles of O₂=8×12.69÷13
moles of O₂=7.80mol
As a result, 7.80 moles if carbon dioxide will be produced.
To know more about co2 visit:
brainly.com/question/28870590
#SPJ4
Can someone help me out with this please
Answer:
A is the correct answer
Explanation:
What is the order of the most common types of hazards or injuries caused by electricity?.
The abbreviation BESAFE was created to represent a number of hazards brought on by electrical mishaps.
Who or what harms people?Injuries are caused by a mix of: human factors, according to a theory known as The Haddon Matrix (external site). : agent, vehicle, and energy (for example, heat) environments—both natural and social.
What exactly do you mean by harm?Damage to your body results from injuries. It's a catch-all phrase for hurt brought on by mishaps, hits, falls, and other events as well as by the use of weapons. Millions of people suffer self-inflicted injuries each year in the United States. From slight to potentially fatal, these injuries range.
To know more about Injuries visit;
https://brainly.com/question/28450125
#SPJ4
What is your responsibility as a voting citizen Why is it important?.
The ones is on the citizen to be aware of who is running for office. Discovering the location of the polling place for voting in their particular constituency is another duty of the citizen.
Electronic voting machines are available for use. A voter can also voice their opinions on crucial matters of progress, development, and growth through the representatives they elect. Furthermore, voting allows citizens a chance to express their views on the most important subjects. Undoubtedly progressive and freeing, the feeling of empowerment.
It entails putting feelings under control in favour of gathering factual evidence. citizens should research media and websites objectively for voting, rather than just using those that support their viewpoints and reinforce them.
Learn more about voting here
https://brainly.com/question/14204008
#SPJ4
a 5-year-old boy is brought by his mother to the emergency department after ingesting a bottle of acetylsalicylic acid. which procedure should be initially instituted with this child?
If a child has ingested a potentially harmful substance, it is important to seek medical attention immediately. In the case of acetylsalicylic acid (also known as aspirin), the child should be taken to the emergency department where a healthcare provider can assess the situation and provide appropriate care.
Initial treatment for a child who has ingested acetylsalicylic acid may include inducing vomiting to remove the substance from the stomach, administering activated charcoal to absorb any remaining acetylsalicylic acid in the digestive tract, and providing supportive care such as fluids to prevent dehydration.
The healthcare provider may also monitor the child's vital signs and conduct blood tests to check for any potential complications.
It is important to note that inducing vomiting and administering activated charcoal should only be done under the guidance of a healthcare provider. Ingesting acetylsalicylic acid can be dangerous, and it is important to seek medical attention as soon as possible.
Learn more about acetylsalicylic acid:
https://brainly.com/question/28841153
#SPJ4
what total energy (in kj) is contained in 1.00 moles of photons, all with a wavelength of 0.00000187 m? your answer should have three significant figures and no units.
The total energy contained in a given number of photons depends on the energy of each photon. The energy of a photon is directly proportional to its frequency and inversely proportional to its wavelength.
To find the energy of a photon with a given wavelength, you can use the formula E = h * c / lambda, where E is the energy of the photon, h is the Planck constant (6.62607015 x 10^-34 J*s), c is the speed of light (2.99792458 x 10^8 m/s), and lambda is the wavelength of the photon.
In this case, the wavelength of the photon is 0.00000187 m, so the energy of a single photon would be: E = 6.62607015 x 10^-34 J * s * 2.99792458 x 10^8 m/s / 0.00000187 m = 1.97639 x 10^-19 J.
If we have 1.00 moles of photons, each with an energy of 1.97639 x 10^-19 J, the total energy contained in the photons would be the number of photons times the energy of each photon. One mole of any substance contains 6.02214076 x 10^23 particles, so 1.00 moles of photons would contain 6.02214076 x 10^23 photons.
To find the total energy contained in 1.00 moles of photons with a wavelength of 0.00000187 m, we can multiply the number of photons by the energy of each photon: 6.02214076 x 10^23 photons * 1.97639 x 10^-19 J/photon = 1.1933 x 10^5 J.
To convert this to kJ, we can divide by 1000 to get 119.33 kJ. Rounded to three significant figures, the total energy contained in 1.00 moles of photons with a wavelength of 0.00000187 m would be 119 kJ.
Learn more about total energy:
https://brainly.com/question/25383334
#SPJ4
identify the type of interactions involved in each of the following processes taking place during the dissolution of sodium chloride (
The type of interactions involved in each of the following processes taking place during the dissolution of sodium chloride : solvent - solvent interaction, solute - solute interaction , solute - solvent interaction.
There are various interaction take place: solvent - solvent interaction : this interaction involves dipole - dipole interaction. this includes interaction between the water molecules. solute - solute interaction : this interactions involves includes ions - ions interaction is sodium chloride. solvent - solute interaction : this interaction is in between the sodium chloride and water molecules.
Thus, The type of interactions involved in each of the following processes taking place during the dissolution of sodium chloride : solvent - solvent interaction, solute - solute interaction , solute - solvent interaction.
To learn more about interaction here
https://brainly.com/question/28901029
#SPJ4
a diatomic element has six bonding electrons, six non-bonding electrons, and 2 anti-bonding electrons. what is the bond order? group of answer choices 3 2 0 4
Answer:
I need help to srry
Explanation:
Im broke and need helppppppp...
The bond order of a diatomic element with six bonding electrons, six non-bonding electrons, and 2 anti-bonding electrons is 2 whose formula is( bonding electrons-anti bonding electrons)/2.
What is an element?An element is defined as a substance which cannot be broken down further into any other substance. Each element is made up of its own type of atom. Due to this reason all elements are different from one another.
Elements can be classified as metals and non-metals. Metals are shiny and conduct electricity and are all solids at room temperature except mercury. Non-metals do not conduct electricity and are mostly gases at room temperature except carbon and sulfur.
The number of protons in the nucleus is the defining property of an element and is related to the atomic number.All atoms with same atomic number are atoms of same element.
Learn more about element,here:
https://brainly.com/question/14347616
#SPJ2
The scale factor of a large swimming pool to a small swimming pool is 0. 12. The large swimming pool can hold 15,000 m3 of water. How much water can the small swimming pool hold?.
The small pool can hold 25.92 m³ of water.
Let
x=the volume of the small swimming pool
y=the volume of the large swimming pool
z= the scale factor
we know that
The volume of the small swimming pool is equal to the scale factor elevated to the cube multiplied by the volume of the large swimming pool
x=z³y
If the scale factor of the small pool to the large pool is equal to 0.12, the ratio of their volumes should be equal to 0.12³ or equal to 1.728 x 10⁻³. We multiply this value by the given volume of the large pool to get the volume of the small pool.
volume of small pool = (1.728 x 10⁻³)(15,000 m⁻³)
volume of small pool = 25.92 m³
Know More About Volume at:
https://brainly.com/question/15613623
#SPJ4
What does it mean when an isotope is unstable?.
Isotopes are the elements which have same atomic number but different mass numbers.
Same atomic number tells that the number of protons present in those elements are same but different mass number tells that the number of nucleons is not the same.
These elements share same position in the periodic table and are stable. With the stability of isotopes it means they do not emit radiations.
The unstable isotopes are those isotopes which emit radiations and this might happen due to the atomic defect that shifts the position of particle, creating F-center which emits radiations.
These isotopes undergo radioactive decay. These decays can be alpha-decay, beta(+) decay or beta(-) decay.
Therefore, unstable isotopes means the isotopes of elements which emit radiations.
To learn more about isotopes, refer: https://brainly.com/question/11605145
#SPJ4
how many possible colors can an atom with 6 electronic energy levels (ground state through level 5) emit?
An atom with 6 electronic electricity stages (ground nation through degree 5) emits the widest variety of emission traces fashioned while the excited electron of H atom in n = 6 drops to the ground nation is 15.
Electric energy is strongly associated with forces on electrically charged particles and the motion of electrically charged particles (frequent electrons in wires, but not usually).
Electrical electricity is electricity associated with forces on electrically charged debris and the motion of electrically charged debris. This energy is furnished with the aid of the mixture of electrical cutting-edge and electric-powered capacity that is introduced by an electrical circuit. as the expenses that purpose the strength are transferred, electrical energy is a form of kinetic strength. Lightning, batteries, or even electric-powered eels are examples of electrical strength in action!
Learn more about Electric energy here:
https://brainly.com/question/874116
#SPJ1
Cobalt-60 has half-life 5.27 y. How much of a 15 mg sample will remain after one, two, and three half-lives?
Based on the half-life of Cobalt-60;
the amount remaining after one half-life = 7.5 mgthe amount remaining after two half-lives = 3.75 mgthe amount remaining after three half-lives = 1.875 mgWhat is the half-life of a substance?The half-life of a substance is defined as the time taken for half of the original amount present in a substance to decay or disappear.
This means that after the half-life of a substance has elapsed, the original amount of substance will reduce by half.
The half-life of substances is an important parameter that can be used to estimate the age of substances.
Considering the given question:
Cobalt-60 has half-life of 5.27 years.
The amount of original sample = 15 mg sample
The amount that will remain after one half-life will be 15 mg/2 = 7.5 mg
The amount that will remain after two half-lives will be 7.5mg/2 = 3.75 mg
The amount that will remain after three half-lives will be 3.72 mg/2 = 1.875 mg
Learn more about half-life at: https://brainly.com/question/1160651
#SPJ1
what volume (in ml) of 0.744 m sulfuric acid is needed to completely neutralize 573 ml of 0.365 m sodium hydroxide?
Therefore, it is clear that 0.5 moles of sulfuric acid are required to neutralize 1 mole of NaOH.
How much H2SO4 is needed to neutralize 8 gram NaOH?Calculating the equation is the first step you must take.H2SO4 + NaOH = Na2SO4 + 2H2O
The result is that 1 mole of H2SO4 neutralizes 2 moles of NaOH.To neutralize 1 mole of NaOH, which weighs (23+16+1) = 40 g, we need 1/10 mole of H2SO4 because 8 g is equal to 1/5 of a mole.H2SO4 has a molecular weight of 98 (2+32+64). Consequently, we require 9.8g, which should probably be rounded up to 10g.(There is no need to be more precise with the molecular weights as the mass of NaOH is only displayed to the nearest whole gram.)To Learn more About sulfuric acid refer to:
https://brainly.com/question/10220770
#SPJ4
granular fertilizer plus postemergence herbicide products are more expensive than sprayable postemergence herbicide products per unit area treated given that the active ingredients are the same in both products.
The statement 'granular fertilizer plus postemergence herbicide products are more expensive than sprayable postemergence herbicide products per unit area treated given that the active ingredients are the same in both products' is true.
When the fertilizer is in a granular form, it is more expensive than a fertilizer in a sprayable form. Fertilizers can be described as chemicals that are added to soil in order to improve the nutritional content of the soil.
In the granular form, a fertilizer and a herbicide will be present as two different products, the cost of both will be different and hence more expensive combined. In a sprayable form, the postemergence herbicide and the fertilizer can occur together inside a spray and hence is cheaper.
The question will correctly be written as:
granular fertilizer plus postemergence herbicide products are more expensive than sprayable postemergence herbicide products per unit area treated given that the active ingredients are the same in both products. True or false
To learn more about fertilizer, click here:
https://brainly.com/question/24544067
#SPJ4
when the cations na , k , rb , cs are combined with chloride ion in the gas phase to form ion pairs, which pair formation releases the greatest amount of energy?
NaCl pair creation releases the most energy when the cations na, k, rb, and cs combine with chloride ion to create ion pairs in the gas phase.
What foods are high in chloride?Sodium chloride or sea salt both include chloride in the form of sodium chloride. Additionally, many veggies contain it. Seafood, rye, tomato, cabbage, celery, and olives are among foods that contain more chloride than others. A lot of meals also include chloride and potassium.
What happens if your chloride is too high?Because of the connection with higher than normal levels of acid in the blood, having too much chlorine in the body can be quite harmful. Kidney stones may result from it if prompt treatment is not received.
To know more about chloride visit:
brainly.com/question/1307733
#SPJ4
What happens when unbalanced forces act on an object at rest?.
An item will move and its velocity will vary when unbalanced forces are applied to it while it is at rest. Keep in mind that a change in velocity can result from changes in either direction or speed.
When a force acts on an object, the thing changes size or shape, begins to move, stops moving, accelerates, or decelerates. When two objects interact, they each apply a force that is equal in magnitude but directed in the opposite direction with some velocity.
An object in motion can also be stopped by unbalanced forces. Wind resistance, gravity, and friction are the three basic forces that slow moving objects down. Balanced forces are equal forces acting in opposing directions.
Learn more about velocity here
https://brainly.com/question/16809028
#SPJ4
How many electrons does hydrogen need a full valence shell?.
There is one electron of hydrogen that needs a full valence shell.
Hydrogen can either share electrons or lose electrons and have a full or empty outer shell, so it can also form ionic bonds. Hydrogen can donate its lone electrons to chemicals such as fluorine and chlorine which have seven electrons in their outermost shell.
The outermost shell of an atom is called the valence shell. A complete valence shell means that the valence shell is fully occupied forming a stable octet. Halogens such as helium, neon, argon and xenon. It has a completely filled valence shell. A valence electron is an electron in the outermost shell of an atom, and the atomic number of hydrogen is 1. So the total number of electrons is 1 and the valence electron is also 1.
Learn more about A full valence shell here:-https://brainly.com/question/10077415
#SPJ4
which of the following is not a correct way in which the reproductive system hormones interact with other body systems
The interaction of reproductive system hormones with other body systems that estrogen activates is incorrect.
What distinguishes the reproductive system from other bodily organs?In contrast to other body systems, the reproductive system works to secure the survival of an entire species, whereas all other body systems work to ensure the life of the individual.
What part do hormones play in the male and female reproductive systems, in your opinion?Sexuality and fertility are influenced by the three primary reproductive hormones, estrogen, testosterone, and progesterone. Pregnancy, puberty, menstruation, menopause, sex drive, sperm production, and other processes are all controlled by them. These hormones are made in the testes and ovaries in females.
To know more about reproductive system visit:-
https://brainly.com/question/14235396
#SPJ4
question:-
which of the following is not a correct way in which the reproductive system hormones interact with other body systems i.e estrogen, testosterone, and progesterone?
2 al(s) 3 br2(l) ----> 2 albr3(s) suppose the actual yield of the reaction is 42.0 grams of albr3 and the percent yield is 75%. what is the theoretical yield?
By multiplying the theoretical yield, or the amount that the process should theoretically produce, by 100.
What do you mean reaction?Resistance or resistance to a force, impact, or movement is a reactionary act, process, or occurrence. especially: a reaction to the a particular treatment, condition, or stimulus; inclination toward a past but typically antiquated political or social system or policy.
What is meaning of reaction in chemistry?One or more chemicals, also referred to as reactants, are transformed into one or more other substances, often referred to as products, in a chemical reaction. Substances are built up of active compounds or chemical elements. Burning is one of the five basic types of chemical reactions, along with combining, breakdown, only one, double-replacement, and replacement.
To know more about reaction visit:
brainly.com/question/28984750
#SPJ4
a sample of air at 7.50 atm is heated from 224k to 448k. if the volume remains constant, what is the final pressure?
if the volume remains constant, what is the final pressure is 3.75ATM.
What is pressure?
pressure is continues physical force exerted on or against an object by something in contact with.
Pressure is the force applied perpendicular to the surface of an object per unit area over which that force is the distributed. Gauge pressure by this is the pressure which relative to the ambient by its pressure. Various units are the used to express pressure.
Applying gas law formulae:
P1/T1 = P2/T2
Where P1 = initial pressure (atm) = 7.5
T1 = initial temperature in Kelvin(K) = 448
P2 = final pressure (atm) = unknown
T2 = final temperature in Kelvin(K) = 224
From the above Formula make P2 the subject of formula
P2 = P1T2/T1
P2 = 7.50*224/448
P2 = 1680/448
P2 = 3.75ATM
To know more about pressure click-
https://brainly.com/question/25736513
#SPJ4
g arrange the following groups of atoms in order of a). increasing size, b). ionization energy, c). electron affinity. a. rb, na, be b. sr, se, ne c. fe, p, o
Increasing Size of Atom ; Rb, Na, Be b. Sr, Se, Ne c. Fe, P, O
What is Atom ?In a chemical reaction, atoms cannot be formed or destroyed since they are indivisible units. The mass and chemical characteristics of each atom of a specific element are the same. Different elements' atoms have varying weight and chemical characteristics. Compounds are created when atoms combine in ratios of small whole numbers.
What do you mean by Electron affinity ?A neutral atom is simpler to remove an electron from than a positive ion, and a negative ion is even simpler. Therefore, O+>O>O is the proper order for IE, as lower IE denotes easier electron removal.
The definition of electron affinity is. when an electron is added to a neutral atom to create an anion, how much energy is released? When an electron is added to a neutral gaseous atom to create a negative ion, the atom's potential energy changes. This shift is known as the electron affinity.
The initial electron affinity is the energy produced when an electron is introduced to a gaseous atom that is in its ground state to create a gaseous negative ion. EA is the symbol, while kJ/mol is the unit.
What do you mean by Ionization energy ?The ionization energy measures an element's ability to participate in chemical processes that call for the creation of ions or the donation of electrons. It is often connected to the type of chemical bonds that exist between the components in the compounds they form. See also electron affinity and binding energy.
Ionization energy is often measured in electronvolts (eV) or joules in physics (J).To know more about Atom please click here ; https://brainly.com/question/6258301
#SPJ4
How should the heat of the reaction for neutralization of naoh and two acid compare?.
HCl and NaOH reaction has a larger heat of neutralization. Acetic acid and NaOH reaction has a larger heat of neutralization.
Enthalpy of neutralization is the heat evolved when one gram equivalent of the acid is completely neutralized by a base in the dilute solution. . 13.7 kcal of heat is liberated out and is the heat of neutralization for all strong acids and bases.
Neutralisation is a chemical reaction where an acid and a base react with each other quantitatively. It is also written as Neutralisation. The acid strength of the reactant gives the pH of the neutralized solution
In case of HCl and NaOH the heat of neutralization is basically larger. In case of acetic acid and NaOH also the heat of neutralization is greater.
To know more about heat of neutralization
https://brainly.com/question/15347368
#SPJ1
if 1.0 mol of n2 gas is mixed with xe gas, in a 5.0l container at 25 c. what are the moles of xe gas
0.204 moles of xe gas
Using the ideal gas formula, PV=nRT
n = PV/ RT
= 5.0 L × 1.0 atm / 0.0821 × 298 K
= 0.204
n = n Xe + n N₂
0.204 = n Xe + 1.0 mol
n Xe = 0.204 moles
To know more about the ideal gas equation click here:
brainly.com/question/18518493
#SPJ4
a major component of gasoline is octane . when liquid octane is burned in air it reacts with oxygen gas to produce carbon dioxide gas and water vapor. calculate the moles of octane needed to produce of water. be sure your answer has a unit symbol, if necessary, and round it to the correct number of significant digits.
According to the given statement As a result, 0.1 moles of CO₂ were created by the process.
Where is oxygen gas found?By mass, it is the element that is most prevalent in the crust of the Earth. Sand and minerals like quartz are created when oxygen combines with si and other molecules to form compounds. In the atmosphere, it ranks as the second-most prevalent gas. O2 makes up around 21% of the air.
Briefing:The balanced formula for the reaction will be written first. Here is an example:
2C₈H₁₈ + 25O₂ → 16CO₂ + 18H₂O
From the balanced equation above,
25 moles of O₂ reacted to produce 16 moles of CO₂.
With the knowledge provided above, we can determine how many moles of CO₂ were produced by the reaction of 0.085 moles of O₂. This is attainable as follows:
From the balanced equation above,
25 moles of O₂ reacted to produce 16 moles of CO₂.
Therefore,
0.085 mole of O₂ will react to produce = = 0.1 mole of CO₂.
As a result, 0.1 moles of CO₂ were created by the process.
To know more about oxygen gas visit:
https://brainly.com/question/6669845
#SPJ4
The complete question is -
A major component of gasoline is octane C₈H₁₈. When liquid octane is burned in air it reacts with oxygen O2 gas to produce carbon dioxide gas and water vapor. Calculate the moles of carbon dioxide produced by the reaction of 0.085mol of oxygen. Be sure your answer has a unit symbol, if necessary, and round it to 2 significant digits.
List the following molecules in order of increasing dipole moment: h2o, cbr4, h2s, hf, nh3, co2.
Increasing order of dipole moment [tex]CO{2}[/tex] < CBr4 < H2S < NH3 < H2O < HF.
What is Dipole moment?
The dipole moment can be thought of as a gauge for a molecule's polarity. The bond is more polar the greater the difference in electronegativity.
The following compounds have HF.The molecule is symmetrical, which cancels the dipole, and the difference in electronegativity is 1.4. The molecule is bent, and the difference in electronegativity is 1.9. There is no net dipole. The molecule has a symmetrical configuration; the electronegativity difference is 0.4; the electronegativity difference is 0.9. As a result, the molecule's net dipole is zero.
The dipole moment will increase in the following order: CO2, CBr4, H2S, NH3, H2O, and HF.
HF is the compound having the greatest dipole moment.
To learn more about the dipole moment
brainly.com/question/16260427
#SPJ4
Researchers are investigating the effect of pHpH level in water on the breeding habits of the moon jellyfish. As part of a laboratory experiment, they will randomly assign one of three treatments, low pHpH, medium pHpH, or high pHpH, to the water in the tanks that hold the jellyfish.
Which of the following is the best reason for the random assignment of a treatment level to an experimental unit?
Randomization tends to minimize the effects of uncontrolled variables, such as water temperature, so that such factors are not confounded with the treatment effects.
The best reason for the random assignment of a treatment level to an experimental unit is Randomization tends to minimize the effect of uncontrolled variables such as water temperature.
The part of the investment the effect of pH level in water on the breeding habit of the moon jellyfish they put a random assignment. Randomization tends to minimize the effects of uncontrolled variables, such as water temperature. Randomization will make up for improper experimental design, data collection, and analysis. It is used to ensure the results of an experiment because if the treatment or hypothesis instead of any other external factor that we can not control. if only one group of jellyfish is affected we can re-try the experiment to see if the difference in the Ph had anything to do with the change. This is the part of the experiment.
To learn more about Randomization assignment please visit:
https://brainly.com/question/18676789
#SPJ4
