is the structure of c {4}h {6} rigid? (i.e. is it unable to rotate/move?) if not, which part of the molecule is not rigid? try to describe the shape of this molecule.

The frequency of a microwave that has a wavelength of 8.72 × 10-¹⁰m is 3.44 × 10¹⁷Hz.

Wavelength is often designated in physics as λ, and corresponds to the velocity of the wave divided by its frequency.

The wavelength, λ, of a substance can be calculated as follows:

λ = v/f

According to this question, a microwave possesses a wavelength of 8.72 × 10-¹⁰m. The frequency can be calculated as follows:

f = v/λ

f = 3 × 10⁸ ÷ 8.72 × 10-¹⁰

f = 3.44 × 10¹⁷Hz

Learn more about frequency at: https://brainly.com/question/18651058

#SPJ1

A mole of Chromebooks lined up end to end would encircle the moon approximately 1.59 x 10^16 times.

The length of a standard-size school Chromebook is 11.6 inches.

To determine the number of times a mole of Chromebooks lined up end to end would encircle the moon, we need to first convert the length of one Chromebook into meters and then multiply that by Avogadro's number, which is the number of particles in a mole.

One Chromebook is 11.6 inches long, which is approximately 0.2946 meters. Avogadro's number is 6.022 x 10^23.

So, the total length of a mole of Chromebooks lined up end to end would be:

0.2946 meters * 6.022 x 10^23 = 1.75 x 10^24 meters

The circumference of the moon is approximately 10,917 kilometers, which is equal to 10,917,000 meters.

Learn more about a mole at: https://brainly.com/question/29367909

#SPJ1

The correct option is b. at an angle; If a bullet passes through glass and leaves an oval-shaped hole, it entered the glass at an angle.

An oval resembles the form, contour, or shape of an egg.

For instance:

Thus, If a bullet passes through glass and leaves an oval-shaped hole, it entered the glass at an angle.

To know more about the oval-shaped, here

https://brainly.com/question/12597150

#SPJ1

With 11 protons and 11 electrons, sodium (Na) is created. The valence shell, or second shell, of sodium is finished when an electron is donated. Hence, option 1 is correct answer.

The distribution of electrons among the many possible orbitals on an element's atom is known as its "electron configuration." The designations of the orbitals s, p, d, and f refer to groups of lines that were first detected in the spectra of the alkali metals. The sharp, primary, diffuse, and fundamental line groupings are among them.

The s-orbital, p-orbital, d-orbital, and f-orbital are among them. the first shell is known as the K shell because: Spectroscopist Charles G. Barkla gave the electron shells their names. As he observed that the X-rays produce two different sorts of energy, he gave the innermost shell the name K shell. He gave type A, higher energy, and type B, lower energy X-ray as additional names for those two energies.

The electron configuration of Sodium is

Na₁₁ = 1s² 2s² 2p⁶ 3s¹

When the sodium ion denotes 1 electron to another atom, then the electron configuration becomes,

Na⁺ = 1s² 2s² 2p⁶

Learn more about the Electronic Configuration here: https://brainly.com/question/26084288

#SPJ4

Answer:

B) A person activates a cold pack by hitting it against a surface.

C) A rechargeable battery is plugged in to charge.

D) Heat is used to separate a compound into its elements.

Explanation:

Chemical reactions that absorb energy are called endothermic reactions. Endothermic reactions absorb energy in the form of heat, light, or electricity, which causes the temperature of the system to decrease.

A) Plants use sunlight and atmospheric gases to make food through photosynthesis, which is an endothermic reaction that absorbs energy in the form of light.

B) A person activates a cold pack by hitting it against a surface, which triggers an endothermic reaction that absorbs heat from the surroundings, causing the cold pack to become cold.

C) A rechargeable battery is plugged in to charge, which involves an endothermic reaction that absorbs electrical energy, converting it into chemical energy that is stored in the battery.

D) Heat is used to separate a compound into its elements through heating, which is an endothermic reaction that absorbs heat from the surroundings, causing the temperature of the system to decrease.


ALLEN

The change in enthalpy (Δh) between the initial and final state is [tex]-48270 kJ[/tex]

The change in enthalpy (Δh) between the initial and final state can be calculated using the following equation:

Δ[tex]h = m (h2 - h1)[/tex]

where m is the mass of water vapor, h1 is the enthalpy of the initial state and h2 is the enthalpy of the final state.

Since the initial state is at 300 kPa and 200°C, the enthalpy of the initial state (h1) can be calculated using the steam tables. From the steam tables, the enthalpy of the initial state (h1) is 2760 kJ/kg.

The final state is at 175 kPa and a quality of 50%. The enthalpy of the final state (h2) can also be calculated using the steam tables. From the steam tables, the enthalpy of the final state (h2) is 1703 kJ/kg.

Now, the mass of water vapor (m) in the closed piston-cylinder device can be calculated using the ideal gas law equation.The following equation is the ideal gas law:

[tex]PV = mRT[/tex]

where R is the gas constant, T is the temperature, V is the volume, m is the mass, and P is the pressure.

Since the volume of the closed piston-cylinder device is 5 liters and the temperature is 200°C, the mass of the water vapor (m) can be calculated as follows:

[tex]m =\frac{ (300 kPa * 5 liters)}{ (0.287 *323.15 K)}[/tex]

Therefore, the mass of the water vapor (m) is 41.6 kg.

Finally, the change in enthalpy (Δh) between the initial and final state can be calculated using the equation given above. Thus,

Δ[tex]h = 41.6 (1703 - 2760) = -48270 kJ[/tex]

Therefore, the change in enthalpy (Δh) between the initial and final state

is [tex]-48270 kJ[/tex].

learn more about enthalpy Refer:brainly.com/question/13996238

#SPJ4

Slime is a non-Newtonian fluid and does not have a molecular structure that can be considered polar or non-polar. The term "polarity" typically refers to the distribution of electrical charge within a molecule. In the case of slime, the material is made up of polymer molecules, which are long chains of repeating units. These polymer molecules interact with each other through hydrogen bonding, which gives the material its unique properties such as being a non-Newtonian fluid. However, these interactions are not based on polarity, so it is not appropriate to describe slime as being polar or non-polar.

Answer:

The polarity of slime molecules depends on the specific type of slime. There are many different types of slime, each made up of different types of molecules.

For example, if we consider a typical type of slime made from polyvinyl alcohol (PVA), the polarity of the PVA molecules will depend on their molecular structure and the type of bonding between the atoms. PVA is a synthetic polymer made up of repeating units of vinyl alcohol, which has a polar hydroxyl group (-OH). As a result, PVA is considered to be a polar molecule.

However, the overall polarity of a slime made from PVA will also depend on the other ingredients that are present, such as borax, which is often used as a cross-linking agent to form the slime. The overall polarity of the slime will also depend on the conditions it is in, such as the temperature, pH, and the presence of other substances that could affect the polarity of the slime.

In summary, the polarity of slime molecules can be complex and depends on the specific type of slime, the ingredients that make it up, and the conditions it is in.

Explanation:

Just tell me if you kinda confuse

ALLEN

Its weight changes based on location, but its mass stays the same.

Mass is a measure of the quantity of matter present in an object and therefore, it is always the same. However, the weight of an object differs as the gravitational force on it changes. A Mass indicates the density of an object, while weight specifies its volume.

The dissimilar between mass and weight is that mass is the amount of matter in stuff, while weight is a measure of how the force of gravity acts upon that mass. Mass is the measure of the total matter in a body. Mass is denoted using m or M.

So we can conclude that The distinction between Mass and Weight is Mass is a computation of Inertia and Weight is a consideration of Force.

Learn more about mass here: https://brainly.com/question/19385703

#SPJ1

The statement that is incorrect about ionic compounds is: "ionic bonds involve the sharing of electrons by metals and nonmetals."

Ionic bonds are not formed by the sharing of electrons, but rather by the transfer of electrons from a metal to a nonmetal. The metal loses one or more electrons to form a positive ion (cation), and the nonmetal gains those electrons to form a negative ion (anion). The attraction between these opposite charges forms the ionic bond and holds the ionic compound together.

All the other statements are correct:

Ionic compounds include table salt (NaCl), calcium carbonate (CaCO3), and sodium bicarbonate (NaHCO3).

Ions are formed when ionic solids dissolve in water.

Between metals and nonmetals, ionic bonds form.

The attraction of positive and negative ions holds ionic compounds together.

Learn more about  ionic compounds here:

https://brainly.com/question/29005103

#SPJ4

The highest heat of vaporization is in the case of a) H2O that is explained below.

The heat of vaporization is described as the quantity of heat wanted to show 1 g of a liquid  into a vapor, with out a upward thrust withinside the temperature of the liquid. The Heat of Vaporization (additionally referred to as the Enthalpy of Vaporization) is the warmth required to result in this segment change. Heat imparts strength into the gadget to conquer the intermolecular interactions that maintain the liquid collectively to generate vapor. The heat of vaporization of water is  2,260 kJ/kg, that's same to 40.8 kJ/mol. The vaporization is the other system of condensation. The warmness of condensation is described as the warmth launched whilst one mole of the substance condenses at its boiling factor below preferred pressure.

Thus, a is the correct option.

To learn more about heat of vaporization check the link below:

https://brainly.com/question/26306578

#SPJ4

One kilogramme of water needs one kilocalorie (kcal) of heat to raise its temperature by one degree Celsius (°C). It takes 4.18 kilocalories of heat to raise the temperature of 1 kilogramme of water by 1 degree Celsius.

As a result of a temperature difference, energy can be transferred from one body to another in the form of heat. It is a cornerstone of thermodynamics and is essential to many organic and synthetic processes. Heat is a form of energy that can be transmitted through radiation, conduction, and convection. Heat is created when particles in matter move about. In daily life, we encounter heat in the form of hot drinks, heated spaces, and warmth from the sun. Heat is employed in industry for a number of processes, including manufacturing, power generation, and cooking. Other scientific fields that depend on heat include physics, chemistry, and engineering.

Learn more about heat  here:

https://brainly.com/question/28852989

#SPJ4

The total internal energy in the container is 329.77 Btu and the enthalpy in the container is 385.14 Btu.

Using the steam tables, we can determine the specific volume of water at the given pressure and temperature. The specific volume of water is 0.01658 [tex]ft^3/lbm[/tex].

The mass of water in the container is 0.92 lbm, so the total volume of the water is:

V = m/v = 0.92 lbm / 0.01658 [tex]ft^3/lbm[/tex]  = [tex]55.539 ft^3[/tex]

Assuming the water is at saturation, we can find the total internal energy and enthalpy by using the values in the steam tables for saturated water at 100 psia.

From the steam tables, the total internal energy of saturated water at 100 psia is 358.05 Btu/lbm, so the total internal energy in the container is:

U = m * u = 0.92 lbm * 358.05 Btu/lbm = 329.77 Btu

From the steam tables, the enthalpy of saturated water at 100 psia is 419.02 Btu/lbm, so the enthalpy in the container is:

H = m * h = 0.92 lbm * 419.02 Btu/lbm = 385.14 Btu

Therefore, the total internal energy in the container is 329.77 Btu and the enthalpy in the container is 385.14 Btu.

Learn more about enthalpy :

https://brainly.com/question/13996238

#SPJ4

The answer is that in order to react safely and appropriately during a vehicle failure the motorist need to understand is stated in option d, that says, all of the above.

During a vehicle failure the motorist should react safely and appropriately in order to deal with the situation in a suitable and safe manner.

The first important thing is that the motorist heads to understand what has happened and what are the next correct procedures that he should follow and finally the motorist should also understand that how these procedures should be implemented immediately and successful it too.

As we can see that all of these three things are very important in order to react safely, we can conclude that the answer to your question is option d. all of the above.

To know more about vehicle failure safety, visit,

https://brainly.com/question/28249304

#SPJ4

If it is in group 1 or group 7 (or any group higher than 7), the element is a metal or is a non-metal, then the compound is ionic.

Ionic chemistry is the study of how atoms and molecules interact with each other through the transfer of electrons. It involves the transfer of ions, which are atoms or molecules that have gained or lost an electron. These ions interact with each other to form ionic compounds, which are composed of ionic bonds. These bonds are formed by the attraction between the positive and negative charges of the ions.

This is because ions form when atoms of a metal lose electrons to a non-metal in order to achieve a full outer shell of electrons. Group 1 elements tend to lose one electron, while group 7 elements tend to gain seven electrons.

To learn more about ionic
https://brainly.com/question/30373783
#SPJ1

Answer:

physics teacher walks 4 meters East, 2 meters South, 4 meters West, and finally 2 meters North. Even though the physics teacher has walked a total distance of 12 meters, her displacement is 0 meters. During the course of her motion, she has "covered 12 meters of ground" (distance = 12 m).

The physics instructor has walked a total of 8 metres. Applying the Pythagorean Theorem will reveal this. According to the theorem, the square of the hypotenuse, the longest side of a right triangle, is equal to the sum of the squares of the other two sides.

The overall distance travelled in this instance is the hypotenuse, and the lengths travelled in the east-west and north-south directions are the other two sides. Eight metres, or 4 metres East + 4 metres West, have been covered in an east-west direction.

A total of 8 metres, or 2 metres South + 2 metres North, have been covered in a north-south direction. The total distance travelled is therefore equal to the square root of 8 metres is equal to 8 squared times 8 squared.

By dividing the overall distance travelled into its component parts, this may also be established. The sum of the distances in each direction is the total distance travelled. In this instance, the total distance travelled is 12 metres, or 4 metres east, 2 metres south, 4 metres west, and 2 metres north. The overall distance travelled is 12 metres minus the 8 metres in the East-West direction, which equals 8 metres.

However, because the instructor travelled 4 metres East and 4 metres West, the total distance travelled is really 8 metres.  

Learn more about distance travelled   at:

https://brainly.com/question/509450

#SPJ2

Enzymes can be reused. Because they are not reactants, enzymes are not depleted during a reaction. An enzyme can be employed for other reactions after it has catalysed a reaction and been freed from its binding to a substrate.

Our bodies include enzymes that function as catalysts to quicken processes by reducing the activation energy required to initiate a reaction. The substrate is a molecule that fits into a specific location on each enzyme molecule known as the active site. Like when you insert a key into a lock and the lock unlocks, the substrate undergoes a chemical reaction and transforms into a new molecule called the product.

Each cell in your body includes thousands of distinct enzymes since they are required for the majority of chemical processes. Chemical processes in the body can occur millions of times more quickly with the aid of enzymes than they would otherwise. Enzymes may be utilised over and over again because they are not a component of the final product. How productive!

Learn more about Enzymes here:

https://brainly.com/question/24811456

#SPJ4

Claim: The color of the hydrogen changed from colorless to pinkish when poured from the fifth beaker to the sixth.

Evidence: The substance of the hydrogen changed from colorless to a bubbling dancing around the solution to cloudy and finally to pinkish when poured from the fifth beaker to the sixth.

Reasoning: The change in the color of the hydrogen can be attributed to the differences in the chemical makeup of the beakers. The chemical makeup of the fifth beaker was likely more reactive than that of the fourth, resulting in a cloudy mixture when the hydrogen was poured into it. This reaction created a new compound which was then poured into the sixth beaker, resulting in the hydrogen changing color to pinkish.

Compound in chemistry is a substance composed of two or more elements chemically combined in a fixed ratio.

To learn more about compound

https://brainly.com/question/13516179

#SPJ1

A three-dimensional space where an electron spends most of its time with at least 3 other electrons is called an electron orbital.

An orbital is a region of space around the nucleus where an electron is likely to be found. Orbitals are described by a set of quantum numbers that define the energy, shape, and orientation of the orbital. Each orbital can hold a maximum of two electrons with opposite spins, so when there are at least 3 other electrons in the same space, they are occupying multiple orbitals.

Each orbital is associated with a specific energy level and can hold a maximum of two electrons. There are different types of orbitals, including s, p, d, and f orbitals, each with a different shape and size. The arrangement of electrons in an atom's orbitals determines the chemical properties of the atom.

Learn more about electron orbitals at https://brainly.com/question/26000020

#SPJ11

Yes, an element in the activity series can replace only an element placed below it.

When we look at the activity series, we can observe that nickel is positioned above lead but below iron. As a result, while iron cannot be replaced by nickel metal, lead can be replaced by it in a reaction. Thus, an element can replace another element placed below it in the activity series.

Only when the element being replaced is more reactive than the other element, single-replacement reactions take place. Consequently, having a list of the elements arranged according to their relative reactivity is helpful. The elements in the activity series are listed in decreasing order of how reactive they are.

Metals and nonmetals each have their own activity series because metals replace other metals while nonmetals replace other nonmetals.

To know more about activity series, refer:

https://brainly.com/question/19482695

#SPJ4

The overall cost of creating 65 tonnes of David's suggested mix, which contains 43% NaCl, 33% KCl, and 24% CaCl2, is $2,795 plus $3,217.5 plus $3,120, which comes to $9,132.5.

We need to know the price of each salt per tonne in order to determine the cost of creating 65 tonnes of David's suggested salt mixture, which contains 43% NaCl, 33% KCl, and 24% CaCl2. Assume that the price of NaCl, KCl, and CaCl2 are each $100 per tonne, $150 for KCl, and $200 for CaCl2.

We can now determine the blend's overall cost. It will cost $2,795 for 27.95 tonnes of NaCl at a price of $100 per tonne. It will cost 21.45 tonnes of KCl at a price of $150 per tonne, or $3,217.5. It will cost $15.6 tonnes x $200 per tonne ($3,120) for CaCl2.

David's suggested mix may be produced for 65 tonnes at a total cost of $2,795 + $3,217.5 + $3,120 = $9,132.5.

learn more about KCl here:

https://brainly.com/question/4836100

#SPJ4

The percent by mass of water in the hydrated compound is 60.3%.

Percentage by mass is a way to express the concentration of a solution or the composition of a mixture as a percentage of the total mass of the solution or mixture. It is calculated by dividing the mass of the solute or component of interest by the total mass of the solution or mixture and multiplying by 100%.

The formula for percentage by mass is:

Percentage by mass = (Mass of solute or component / Total mass of solution or mixture) x 100%

The mass of water in the hydrated compound can be calculated by subtracting the final mass of the anhydrate from the initial mass of the hydrated:

Mass of water = Initial mass of hydrated - Final mass of anhydrate Mass of water = 9.5 g - 3.77 g Mass of water = 5.73 g

The percent by mass of water in the hydrated compound can be calculated using the following formula:

Percent by mass = (Mass of water / Initial mass of hydrated) x 100%

Substituting the values we get:

Percent by mass = (5.73 g / 9.5 g) x 100% Percent by mass = 60.3%

Therefore, the percent by mass of water in the hydrated compound is 60.3%.

To know more about solution, visit:

https://brainly.com/question/7932885

#SPJ1

Explanation:

True. They may both be properties of a gas but they are independent of each other since the pressure of a gas may vary without changing the temperature or volume (or any other properties).

Answer:

True

Explanation:

The statement "The qualities/quantities of a gas are independent of one another" is True. This means that a change in one property of a gas, such as pressure, volume, or temperature, does not affect the other properties. This is one of the basic assumptions of the ideal gas law, which states that the pressure, volume, and temperature of a gas are proportional to one another under certain conditions.

For example, when the volume of a gas is increased, its pressure decreases, and when its temperature is increased, its pressure also increases. These changes in properties are independent of one another, and can be described by the mathematical relationships described by the ideal gas law.

ALLEN

The theoretical yield of MgO in grams would be 90.6 grams.

What do you mean by theoretical yield?

The theoretical yield is basically the amount of product that is expected to be produced from a given reaction, taking into account the limiting reactant, according to the stoichiometry of the reaction. It is calculated using the balanced equation for the reaction.

This is because the equation given is a 1:1 ratio, meaning that for every 1 mole of Mg, 1 mole of MgO would be produced. Since we know that the given amount of Mg is 90.6 grams, the theoretical yield of MgO would be the same: 90.6 grams.

To know more about theoretical yield,

https://brainly.com/question/25996347

#SPJ1

M → Mt + e The reaction represents​ oxidation reaction.The loss of electron is called as oxidation.

When it was discovered that the substance loses electrons when oxidized, the meaning was expanded to include other reactions in which electrons are lost, regardless of whether oxygen is involved.

Because any loss of electrons by one substance must be followed by an increase in electrons by another, oxidation and reduction always occur concurrently.

The reaction that the equation M ⇒ Mt + e- represents it is oxidation. M has lost an electron, and is the reducing agent in this equation.

Thus, this equation represents oxidation reaction.

To learn more about the oxidation reaction, follow the link;

https://brainly.com/question/30431626

#SPJ9

Generally, percent Yield is defined as the actual yield divided by the theoretical yield multiplied with 100. There are lots of reasons why the actual yield of a chemical reaction may be less than the theoretical yield.

The following steps should be taken to increase the percent yield of a chemical reaction which are noted below.

Learn more about percent yield from the link given below.

https://brainly.com/question/17042787

#SPJ4

The units that express specific heat capacity are J/(g°C), J/(gK), cal/(g°C), and cal/(gK). The J stands for joules, which is the SI unit of energy, g stands for gram, which is the SI unit of mass, °C stands for degrees Celsius, and K stands for Kelvin.

The cal stands for calorie, which is a non-SI unit of energy. Specific heat capacity is the amount of energy required to increase the temperature of a unit mass of a substance by one degree. It is usually expressed in joules per gram degree Celsius (J/g°C) or calories per gram degree Celsius (cal/g°C). The specific heat capacity of a substance is related to its molecular structure and the intermolecular forces that exist between its molecules. Substances that have strong intermolecular forces, such as those composed of molecules with multiple polar bonds, typically have higher specific heat capacities than substances with weak intermolecular forces, such as those composed of molecules with few or no polar bonds.

To know more about intermolecular forces please refer:

https://brainly.com/question/9007693

#SPJ4

There are fewer water molecules withinside the vapor (i.e., decrease vapor stress) above the NaCl solution than withinside the vapor above natural water.

The boiling factor of the NaCl answer can be extra than the boiling factor of natural water. The boom withinside the boiling factor of a 1.00 m aqueous NaCl answer can be about two times as massive as that of the glucose or sucrose answer due to the fact 1 mol of NaCl produces 2 mol of dissolved ions. Hence a 1.00 m NaCl answer could have a boiling factor of approximately 101.02°C.The addition of any non-unstable solute (including salt, baking soda or sugar) to a liquid will reason a lower in that drinks vapor stress. A liquid will begin to boil while its vapor stress is identical to the atmospheric stress, so a decrease vapor stress method you want a better temperature to boil the water.

To learn more about boiling factor check the link below:

https://brainly.com/question/30321740

#SPJ4

The flow rate is roughly 34 gtt/min per hour. A number of bacterial illnesses can be treated with the antibiotic clindamycin. It is a member of the group of medications known as lincosamide antibiotics.

We can use the following calculation to determine the hourly flow rate in gtt/min: The volume in gtt divided by the number of minutes makes up the hourly flow rate (gtt/min). Let's begin by determining the total volume in gtt: 900 mg = 0.9 g . 75 ml of D5W and 1 g of clindamycin equal 1 x 15 gtt. 0.9 g of clindamycin in 67.5 ml of D5W, or (75/1) times 0.9. 1012.5 gtt is equal to 67.5 ml of D5W multiplied by 15. The infusion will take 30 minutes, we also know that. The formula reads: hourly flow rate (gtt/min) = 1012.5 gtt / 30 min = 33.8 gtt/min after filling in the variables. The hourly flow rate, rounded to the nearest whole amount, is roughly 34 gtt/min.

Learn more about clindamycin here:

https://brainly.com/question/8376709

#SPJ4

Answer:

A 42.66-gram sample of magnesium chloride will dissolve in water to produce 0.448 moles of ions (option A).

How many moles are there, exactly?

In response to this query, magnesium chloride (MgCl2) separates into magnesium ions and chloride ions when it dissolves in water.

Mg2+(aq) + Cl MgCl2(aq) (aq)

However, if a 42.66-gram sample of magnesium chloride dissolves in water, the number of moles of the ionic products will be 42.66 g/molecular mass of MgCl2.

MgCl2 has a molecular weight of 95.3 g/mol.

mol = 42.66g x 95.3g/mol = 0.448mol

Therefore, when a 42.66-gram sample of magnesium chloride is dissolved in water, 0.448 moles of ions will result.