The values of Q and MD are 3.5 and 12.73 respectively.
The given information is as follows: MD = 1.5QMD = 39.24Q / 3.09 = 12.73Therefore, the value of Q is 12.73.Then we are supposed to find MD by putting the value of Q into the given equation.MD = 1.5 * 12.73 = 19.10Therefore, the value of MD is 19.10.Then we are supposed to find Q by putting the value of MD into the given equation.MD = 1.5QQ = 3.5Therefore, the value of Q is 3.5.
Learn more about values here:
https://brainly.com/question/14732695
#SPJ11
Place the steps in the ethical decision-making process in the correct order.
Identify the ethical issues involved.
Compare and weigh the alternatives.
Consider the available alternatives.
Determine the facts.
Identify stakeholders.
Ethical decision-making process is a methodical approach to deciding between two or more options to reach a morally acceptable resolution. Here are the steps in the ethical decision-making process:1. Determine the facts.2. Identify the ethical issues involved.3. Identify stakeholders.4. Consider the available alternatives.5.
Determine the facts - It is important to obtain accurate and complete information about the situation. The facts should be documented, organized and made available to everyone involved in the decision-making process.Step 2: Identify the ethical issues involved - The next step is to identify the ethical issues involved in the situation. This includes determining which values or principles are being challenged.
Step 3: Identify stakeholders - It is important to identify the stakeholders in the decision-making process, including those who will be directly affected by the decision and those who may have an interest in the outcome.Step 4: Consider the available alternatives - After the ethical issues and stakeholders have been identified, the next step is to generate alternative solutions to the problem.
To know more about stakeholders visit:
https://brainly.com/question/32720283
#SPJ11
Northern Lights Electronics just completed plans to distribute its new tablet. The product has several unue features that differentiate it from competitor products The marketing team plans to begin a roll out with to only one traditional retailer for the first two months. This strategy will give consumers the perception of the product's stand out personality and increase demand Marketing will proceed with for the next four months where it plans to distribute to three other retailers, as well. For the last six months of the year, it will initiate distribution agreements with discount retailers and online retailers, and any other electronics store that wants to carry it. The marketing team is confident that the tablet will cycle through the first three stages of its product. We cycle quickly. As the tablet reaches maturity during the second half of its first year in the market, it is good strategy to proceed with as described above Multiple Choice tertiary level distribution secondary level distribution, mono love distribution monove stribution secondary level distribution, tertiary vel ston Intensive distribution selective distribution, exclusive distribution exclusive distribution selective distribution, intensive distribution
The marketing strategy described in the scenario corresponds to the following distribution approach: Selective distribution, intensive distribution
Selective distribution refers to the strategy of distributing a product through a limited number of retailers or outlets that are carefully chosen based on specific criteria. In this case, Northern Lights Electronics initially plans to distribute its new tablet to only one traditional retailer for the first two months. This approach allows the company to create a perception of exclusivity and uniqueness among consumers.
Intensive distribution, on the other hand, involves making the product available through as many outlets as possible to maximize its market coverage. In the second phase of the marketing plan, Northern Lights Electronics aims to distribute the tablet to three other retailers. Finally, during the last six months of the year, the company plans to establish distribution agreements with discount retailers, online retailers, and any other electronics stores interested in carrying the product. This indicates an intention to reach a wider audience by making the tablet available through various channels.
Therefore, the marketing strategy described in the scenario involves a combination of selective distribution (during the initial phase) and intensive distribution (during the later phases).
Learn more about strategy here;
https://brainly.com/question/31930552
#SPJ11
How are goods and services different?
Check all that apply
Tangibility
The production and consumption timing
The degree of customer interaction
Evaluating quality
Reselling potential
Answer:
Explanation:
The differences between goods and services can be summarized as follows:
1. Tangibility: Goods are tangible, physical products that can be seen, touched, and stored, whereas services are intangible and do not have a physical form.
2. The production and consumption timing: Goods are typically produced and then sold or consumed at a later time, while services are often produced and consumed simultaneously.
3. The degree of customer interaction: Goods are often produced without direct customer involvement, whereas services require direct interaction and involvement between the service provider and the customer.
4. Evaluating quality: The evaluation of quality can differ between goods and services. For goods, quality is often assessed based on tangible characteristics such as durability, design, and functionality. In contrast, the quality of services is often evaluated based on intangible aspects such as customer satisfaction, responsiveness, and the overall experience.
5. Reselling potential: Goods generally have a reselling potential, meaning they can be bought by one customer and later sold or transferred to another. Services, on the other hand, are typically consumed and cannot be resold in the same way.
Therefore, the correct options are:
- Tangibility
- The production and consumption timing
- The degree of customer interaction
- Evaluating quality
Reselling potential is not a differentiating factor between goods and services.
Learn more about goods and services
brainly.com/question/22536410
#SPJ11
A non-dividend paying stock X is currently traded at $100 per
share. If the 1-year risk-free interest rate is 5%, what is the
no-arbitrage price for a 1-year forward contract written on stock
X?
The no-arbitrage price for a 1-year forward contract written on stock X would be approximately $105.13 per share. To determine the no-arbitrage price for a 1-year forward contract on stock X, we need to consider the concept of risk-neutral valuation. In a risk-neutral world, the expected return on all assets is equal to the risk-free rate.
Since stock X does not pay dividends, we can assume that the forward price is equal to the future price of the stock. The future price can be calculated using the risk-neutral valuation formula:
Forward Price = Spot Price × e^(r × T)
Where:
- Spot Price is the current price of the stock, which is $100 per share.
- r is the risk-free interest rate, which is 5% or 0.05.
- T is the time to expiration of the forward contract, which is 1 year.
Plugging in the values, we have:
Forward Price = $100 × e^(0.05 × 1)
Calculating the exponent:
Forward Price = $100 × e^(0.05)
Using the value of e^(0.05) ≈ 1.05127:
Forward Price ≈ $100 × 1.05127
Forward Price ≈ $105.13
Therefore, the no-arbitrage price for a 1-year forward contract written on stock X would be approximately $105.13 per share.
Learn more about stock price here:
https://brainly.com/question/17055829
#SPJ11
For each of the following independent Cases, the taxpayer's combined federal and provincial taxes payable amounted to $17,600 for the taxation year ending December 31,2020 , and $14,400 for the taxation year ending December 31,2021 . In 2022 , it is estimated that federal and prowincial taxes payable for the taxation year ending December 31,2022, wil be $13,200. The actual federal and provincial taxes payable for 2022 . calculated in March 2023, is $16,100. Vievithe cases Read the requirements: Case A The indinduar's estimated tax payable for the current year and the actual tax payable for the preceding year exceeds Therefore, instalments requred. The would result in the minimum instalment payments. Cases Case A The taxpayer is an individual whose only income is rental income. Case B The taxpayer is an individual whose employer withholds combined federal and provincial taxes of $7,100 in 2020,$14,900 in 2021, and $8,700 in 2022 Case C The taxpayer is a small CCPC with a December 31 taxation year end. Case D The taxpayer is a publicly traded corporation with a December 31 taxation year end Assume that its combined federal and provincial taxes payable for the year ending December 31,2022 , are estimated unted to $17,600 for the federal and provincial taxe Jated in March 2023 , is $1 to be $16,100 instead of the $13,200 given in the problem. Required For each of the Cases, state whether instalments are required for the 2022 taxation year, even if one of the methods results in required instalments of nil. Explain your conclusion. If instalments are required, indicate: - the best alternative for calculating the instalments; - the amount of the instalments under that alternative showing all calculations. even if the optimum solution is obvious: - the dates on which the payments will be due; and - any consequences of the 2022 estimated taxes being lower than the actual taxes payable.
Case A: The taxpayer, whose only income is rental income, meets the criteria for instalment payments since their estimated tax payable for the current year and actual tax payable for the preceding year exceeds $3,000.
To calculate the minimum instalment payments, the best alternative would be Option 2, which involves calculating the instalments based on the lesser of 90% of the current year's tax liability or 100% of the previous year's tax liability.
For Case A, the amount of instalments would be calculated as follows:
Current year's estimated tax payable: $13,200
Previous year's actual tax payable: $16,100
Since 90% of the current year's tax liability is less than 100% of the previous year's tax liability, the instalments will be based on 90% of the current year's tax liability, which is $11,880. Therefore, the total instalments due would be $11,880, divided into four equal payments due on March 15, June 15, September 15, and December 15.
If the estimated taxes for 2022 are lower than the actual taxes payable, there may be a penalty for underpayment of instalments. However, if the taxpayer's actual tax liability for 2022 ends up being less than the estimated taxes paid through instalments, they will receive a refund for the overpayment.
Case B: The taxpayer's employer withholds combined federal and provincial taxes, which means that the taxpayer is not required to make instalment payments. This is because the employer is already remitting taxes on behalf of the employee throughout the year.
Case C: As a small CCPC with a December 31 taxation year end, the taxpayer is also exempted from instalment payments for 2022. This is because the CCPC is eligible for the quarterly instalment remittance option (QIRO), which allows them to remit their taxes quarterly after the end of the taxation year.
Case D: The publicly traded corporation with a December 31 taxation year end meets the criteria for instalment payments since their estimated tax payable for the current year exceeds $3,000. To calculate the minimum instalment payments, the best alternative would be Option 1, which involves calculating the instalments based on the corporation's taxable income in the preceding taxation year.
For Case D, assuming that the estimated taxes for 2022 are also $17,600, the amount of instalments would be calculated as follows:
Taxable income for the previous taxation year (2021): $100,000
Federal and provincial tax payable on that income: $17,600
Required instalment payment: 25% of $17,600 = $4,400
Therefore, the total instalments due would be $4,400, divided into three equal payments due on March 15, June 15, and September 15. If the estimated taxes for 2022 are lower than the actual taxes payable, there may be a penalty for underpayment of instalments. However, if the corporation's actual tax liability for 2022 ends up being less than the estimated taxes paid through instalments, they will receive a refund for the overpayment.
Learn more about taxpayer here:
https://brainly.com/question/31860339
#SPJ11
Historically, when is the yield curve upward sloping?
a.During normal times of economic expansion
b.When the the current rate of inflation is abnormally high, and this is expected to be temporary
c.When the Federal Reserve is currently selling a higher than normal amount of bonds in the open market
d.When the economy is weakening
Historically, an upward-sloping yield curve has been observed during normal times of economic expansion (option a). The correct option is a.
The yield curve is a graphical representation of the interest rates of bonds with different maturities. It shows the relationship between the interest rates (or yields) and the time to maturity of bonds.
The shape of the yield curve can provide insights into the market's expectations about future interest rates and economic conditions.
Historically, an upward-sloping yield curve has been observed during normal times of economic expansion (option a). This means that longer-term bonds have higher yields than shorter-term bonds.
During economic expansions, investors typically expect higher inflation and stronger economic growth in the future, which leads to higher long-term interest rates.
On the other hand, an upward-sloping yield curve can also occur when the current rate of inflation is abnormally high, but this is expected to be temporary (option b).
In this situation, investors may demand higher yields for longer-term bonds to compensate for the higher inflationary environment.
The other options, selling a higher than normal amount of bonds in the open market by the Federal Reserve (option c) and weakening economy (option d), are not directly associated with an upward-sloping yield curve.
The actions of the Federal Reserve can influence short-term interest rates, but they do not have a direct impact on the shape of the yield curve. A weakening economy, on the other hand, could result in a flatter or inverted yield curve, where short-term yields are higher than long-term yields.
To summarize, an upward-sloping yield curve is historically observed during normal times of economic expansion and when the current rate of inflation is abnormally high but expected to be temporary.
For more such questions on economic expansion
https://brainly.com/question/17353636
#SPJ11
The Zoe Company manufactures lamps in Toronto, Ontario. The company has raised $800,000 from an issue of common shares. The company paid off a long-term bank loan of $400,000. The also borrowed $1,200,000 by way of a mortgage on a building it purchased for $1,500,000.
Required a) Calculate the cash used in or cash from financing activities. Explain the reasoning why a company may prefer financing either by way of issuing common shares or by borrowing long term from a Bank.
The cash used in financing activities is $1,600,000 ($400,000 for loan repayment + $1,200,000 for the mortgage).
A company may prefer financing through issuing common shares because it allows them to raise capital without incurring debt. By issuing shares, the company sells ownership stakes to investors in exchange for cash. This method can help the company maintain a healthy debt-to-equity ratio and avoid interest payments associated with borrowing. Additionally, issuing shares can bring in new shareholders who may contribute valuable expertise or connections to the business.
On the other hand, borrowing long term from a bank provides immediate access to a large amount of capital. This method allows the company to retain full ownership and control over the business while leveraging the borrowed funds. Borrowing can be advantageous when the company needs funds for specific investments or expansions and is confident in its ability to generate sufficient cash flow to repay the loan. However, borrowing comes with interest payments and the obligation to repay the principal, which can add financial strain if the company's cash flow becomes insufficient.
The choice between issuing common shares and borrowing long term depends on various factors, such as the company's financial position, growth plans, and risk tolerance. Companies must carefully evaluate their specific circumstances to determine the most suitable financing option.
Learn more about activities here: brainly.com/question/31904772
#SPJ11
Suppose that a zero-coupon bond with a face value of 10755 and time to maturity of 5 years is trading at $7981. What is its yield to maturity (YTM)? 5.84032% 6.76248% O 5.22555% 6.14771% 5.53294%
To calculate the yield to maturity (YTM) of a zero-coupon bond, we can use the following formula:
The answer options provided are in percentages, so we need to convert the YTM to a percentage by multiplying by 100:
YTM = 34.35%
YTM = (Face Value / Current Price)^(1 / Time to Maturity) - 1
Given the information:
Face value = $10,755
Current price = $7,981
Time to maturity = 5 years
Plugging these values into the formula, we get:
YTM = ($10,755 / $7,981)^(1 / 5) - 1
Calculating the expression inside the parentheses first:
($10,755 / $7,981)^(1 / 5) = 1.343518425
Substituting this value back into the YTM formula:
YTM = 1.343518425 - 1
Simplifying the equation, we find that the YTM is approximately 0.3435, or 34.35%.
However, the answer options provided are in percentages, so we need to convert the YTM to a percentage by multiplying by 100:
YTM = 34.35%
None of the given answer options match this result exactly. The closest option is "5.53294%," but it does not match the calculated YTM accurately.
Learn more about maturity here
https://brainly.com/question/28039417
#SPJ11
Enviro Waste’s year end is December 31. The information in (a) to (e) is available at year-end for the preparation of adjusting entries:
The Unearned Revenue account has a balance of $18,500. On December 31, $2,500 remains unearned.
The annual building depreciation is $10,500.
The Spare Parts on hand account shows an unadjusted balance of $450. A physical count reveals a balance on hand of $100.
Unbilled and uncollected services provided to customers totalled $3,550.
The utility bill for the month of December was received but is unpaid; $1,300.
Prepare the required adjusting entries at December 31, 2019, for (a) to (e).
To adjust the Unearned Revenue: Debit $16,000 to Unearned Revenue and credit $16,000 to Revenue. To record building depreciation: Debit $10,500 to Depreciation Expense - Building and credit $10,500 to Accumulated Depreciation - Building.
The required adjusting entries on December 31, 2019, are as follows:
(a) To adjust the Unearned Revenue account:
Debit Unearned Revenue: $16,000
Credit Revenue: $16,000
(b) To record building depreciation:
Debit Depreciation Expense - Building: $10,500
Credit Accumulated Depreciation - Building: $10,500
(c) To adjust the Spare Parts on hand account:
Debit Spare Parts Expense: $350
Credit Spare Parts on Hand: $350
(d) To record unbilled and uncollected services:
Debit Accounts Receivable: $3,550
Credit Service Revenue: $3,550
(e) To record the utility bill:
Debit Utility Expense: $1,300
Credit Accounts Payable: $1,300
These adjusting entries ensure that the financial statements reflect the appropriate revenue, expense, and asset values at the end of the year.
Learn more about financial statements:
https://brainly.com/question/14951563
#SPJ11
If a company purchases equipment costing $4,000 on credit, the effect on the accounting equation woul A. Assets increase $4,000 and liabilities decrease $4,00C B. Equity decreases $4,000 and liabilities increase $4,00 C. One asset increases $4,000 and another asset decreases $4,000. D. Assets increase $4,000 and liabilites increase $4,000 E. Equity increases $4,000 and liabilities decrease $4,00
the correct option is A. Assets increase $4,000 and liabilities increase $4,000.A. Assets increase $4,000 and liabilities increase $4,000.
When a company purchases equipment costing $4,000 on credit, it will have the following effect on the accounting equation:
Assets increase by $4,000 (specifically, the Equipment account is increased).
Liabilities increase by $4,000 (specifically, the Accounts Payable account is increased) since the purchase was made on credit.
This transaction does not directly impact equity since equity represents the owner's interest in the company, and the purchase of equipment on credit does not affect the owner's investment or withdrawal.
Therefore, the correct option is A. Assets increase $4,000 and liabilities increase $4,000.
.
To learn more about liability click here:brainly.com/question/30805836
#SPJ11
the correct option is A. Assets increase $4,000 and liabilities increase $4,000.A. Assets increase $4,000 and liabilities increase $4,000.
When a company purchases equipment costing $4,000 on credit, it will have the following effect on the accounting equation:
Assets increase by $4,000 (specifically, the Equipment account is increased).
Liabilities increase by $4,000 (specifically, the Accounts Payable account is increased) since the purchase was made on credit.
This transaction does not directly impact equity since equity represents the owner's interest in the company, and the purchase of equipment on credit does not affect the owner's investment or withdrawal.
Therefore, the correct option is A. Assets increase $4,000 and liabilities increase $4,000.
.
To learn more about liability click here:brainly.com/question/30805836
#SPJ11
_____ plus _____ plus _____ equals _____.
a. Total deposits, loans, required reserves, excess reserves.
b. Loans, required reserves, excess reserves, total deposits.
c. Required reserves, total deposits, excess reserves, loans.
d. Excess reserves, loans, total deposits, required reserves.
In the context of banking and the fractional reserve system, the relationship among required reserves, total deposits, excess reserves, and loans is the correct order .
The correct option is C.
Required reserves refer to the portion of customer deposits that banks are required to hold in reserve by the central bank or regulatory authorities. The required reserve ratio is set by the central bank and is typically expressed as a percentage of total deposits. It represents the minimum amount of reserves that banks must hold to ensure the stability of the banking system.
Total deposits represent the sum of all customer deposits held by banks. These deposits include both demand deposits (such as checking accounts) and time deposits (such as savings accounts or certificates of deposit). Total deposits serve as a liability for banks since they owe this money to their depositors. Excess reserves are the reserves held by banks in excess of the required reserves. In other words, it is the difference between the actual reserves held by a bank and the required reserves.
Hence , C is the correct option
To learn more about Required reserves , here
brainly.com/question/30076175
#SPJ4
Even though most corporate bonds in the United States make coupon payments semiannually, bonds issued elsewhere often have annual coupon payments. Suppose a German company issues a bond with a par value of €1,000, 27 years to maturity, and a coupon rate of 3.6 percent paid annually. If the yield to maturity is 3.2 percent, what is the current price of the bond in euros? Input area: Settlement date 1/1/2020 Maturity date 1/1/2047 Coupon rate 3.60% Coupons per year 1 Redemption value (% of par) 100 Yield to maturity 3.20% Par value € 1,000 (Use cells A6 to B12 from the given information to complete this question. You must use the built-in Excel function to answer this question. Leave the "Basis" input blank in the function. You may enter a constant as a hard coded value.) Output area: Price (% of par) Price
Therefore, the current price of the bond in euros is € 1,066.86.
The current price of the bond in euros can be calculated by using the Excel function PV which stands for Present Value, and it represents the current price of the bond. As the bond makes an annual coupon payment, only one coupon payment per year is there, and the present value of the bond is calculated by using the below formula;Price of the bond = (Annual coupon payment / (1 + Yield to maturity)^number of years) + (Redemption value / (1 + Yield to maturity)^number of years)Where,Annual coupon payment is equal to (Coupon rate * Par value)Redemption value is equal to Par value, andNumber of years is equal to the number of years to maturity.In this problem, the annual coupon payment will be 3.60% * €1,000 = €36,Redemption value will be equal to €1,000,Number of years to maturity is 27 years and the yield to maturity is 3.2%.After substituting all the values in the above formula, we getPrice of the bond = (36 / (1 + 0.032)^27) + (1,000 / (1 + 0.032)^27)= € 1,066.86 (approx.). Therefore, the current price of the bond in euros is € 1,066.86.
To know more about formula visit:
https://brainly.com/question/32718394
#SPJ11
One reason why producers have an incentive to organize in favor of protection is because? A)producer gains are spread across so many firms that no one gets a large share of the benefits. B)producer gains are relatively concentrated. C)there is no real cost to the economy. D)producer gains outweigh consumer losses.
Producers have an incentive to organize in favor of protection because producer gains are relatively concentrated. The gains or benefits that the producers will receive after obtaining protection are spread among a small number of producers that are operating in the protected industry.
Thus, there is a real incentive for them to organize in favor of protection. When protection is put into place, it reduces the amount of competition in the industry. As a result of this reduction in competition, firms can charge higher prices, leading to increased profits.
Producers have an incentive to organize in favor of protection because producer gains are relatively concentrated. The gains or benefits that the producers will receive after obtaining protection are spread among a small number of producers that are operating in the protected industry.
To know more about Producers visit:-
https://brainly.com/question/30698459
#SPJ11
Modern growth theory views economic growth as A. endogenous. B. exogenous. C. random. D. independent of the institutions that exist in the country.
Modern growth theory views economic growth as A. endogenous.
Modern growth theory views economic growth as endogenous, meaning that it is determined by internal factors within the economic system rather than being driven solely by external factors. In this perspective, economic growth is seen as a result of various factors such as technological progress, human capital accumulation, research and development, innovation, and institutional arrangements.
Unlike exogenous growth theories, which attribute economic growth to external factors such as population growth or changes in resource availability, endogenous growth theory emphasizes the role of internal factors and mechanisms that promote sustained and self-reinforcing growth. These internal factors can include investments in education, infrastructure, entrepreneurship, and institutions that support economic development and productivity enhancement.
According to modern growth theory, countries can influence and enhance their economic growth through deliberate policies and actions that foster the accumulation of human capital, encourage innovation and technological progress, and create an environment conducive to entrepreneurship and investment. The role of institutions, such as property rights, legal systems, and governance, is also recognized as important in shaping economic growth outcomes.
In summary, endogenous growth theory highlights the significance of internal factors, innovation, and institutions in driving economic growth, suggesting that countries have the capacity to influence and shape their own economic development trajectories.
To know more Modern growth theory follow the link:
https://brainly.com/question/31526354
#SPJ4
Maxey & Sons manufactures two types of storage cabinets-Type A and Type B-and applies manufacturing overhead to all units at the rate of $132 per machine hour. Production information follows.
Type A Type B
Anticipated volume (units) 26,400 49,500
Direct-material cost per unit $34 $51
Direct-labor cost per unit 39 39
The controller, who is studying the use of activity-based costing, has determined that the firm's overhead can be identified with three activities: manufacturing setups. machine processing, and product shipping. Data on the number of setups, machine hours, and outgoing shipments, which are the activities' three respective cost drivers, follow.
Type A Type B Total
Setups 152 112 264
Machine hours 52,800 74,250 127,050
Outgoing shipments 200 150 350
The firm's total overhead of $16,770,600 is subdivided as follows: manufacturing setups, $3,659,040; machine processing, $10,062,360; and product shipping, $3,049,200.
1. Compute the unit manufacturing cost of Type A and Type B storage cabinets by using the company's current overhead costing procedures.
2. Compute the unit manufacturing cost of Type A and Type B storage cabinets by using activity-based costing.
1) Unit manufacturing cost for Type A = Direct-material cost per unit + Direct-labor cost per unit + (Overhead cost per setup × Number of setups for Type A) + (Overhead cost per machine hour × Machine hours for Type A) + (Overhead cost per outgoing shipment × Outgoing shipments for Type A)
2) Unit manufacturing cost for Type B = Direct-material cost per unit + Direct-labor cost per unit + (Overhead cost per setup × Number of setups for Type B) + (Overhead cost per machine hour × Machine hours for Type B) + (Overhead cost per outgoing shipment × Outgoing shipments for Type B)
1. Unit manufacturing cost using the company's current overhead costing procedures:
To calculate the unit manufacturing cost, we need to allocate the total overhead based on the anticipated volume of each type of cabinet.
For Type A:
Total overhead cost = $16,770,600
Anticipated volume for Type A = 26,400 units
Overhead cost per unit for Type A = Total overhead cost / Anticipated volume for Type A
$16,770,600 / 26,400
= $635 per unit
Unit manufacturing cost for Type A = Direct-material cost per unit + Direct-labor cost per unit + Overhead cost per unit
$34 + $39 + $635
= $708
For Type B:
Total overhead cost = $16,770,600
Anticipated volume for Type B = 49,500 units
Overhead cost per unit for Type B = Total overhead cost / Anticipated volume for Type B
$16,770,600 / 49,500
= $337.24 per unit
Unit manufacturing cost for Type B = Direct-material cost per unit + Direct-labor cost per unit + Overhead cost per unit
$51 + $39 + $337.24
= $427.24
2. Unit manufacturing cost using activity-based costing:
To calculate the unit manufacturing cost using activity-based costing, we need to allocate the overhead costs based on the respective cost drivers for each activity.
For manufacturing setups:
Total overhead cost for manufacturing setups = $3,659,040
Number of setups for Type A = 152
Number of setups for Type B = 112
Overhead cost per setup = Total overhead cost for manufacturing setups / Total number of setups
$3,659,040 / (152 + 112)
= $10,640 per setup
For machine processing:
Total overhead cost for machine processing = $10,062,360
Machine hours for Type A = 52,800
Machine hours for Type B = 74,250
Overhead cost per machine hour = Total overhead cost for machine processing / Total machine hours
$10,062,360 / (52,800 + 74,250)
= $59.06 per machine hour
For product shipping:
Total overhead cost for product shipping = $3,049,200
Outgoing shipments for Type A = 200
Outgoing shipments for Type B = 150
Overhead cost per outgoing shipment = Total overhead cost for product shipping / Total outgoing shipments
$3,049,200 / (200 + 150)
= $10,664 per outgoing shipment
Learn more about Unit manufacturing cost here:
https://brainly.com/question/15575669
#SPJ4
Morrow Corporation had only one job in process during May-Job ×32Z− and had no finished goods inventory on May 1. Job X 32Z was started in April and finished during May, Data concerning that job appear below: The company's total manufacturing overhead applied always equals its total actual manufacturing overhead. Required: 1. What is the cost of goods sold for May? 2. What is the total value of the finished goods inventory at the end of May? 3. What is the total value of the work in process inventory at the end of May?
The cost of goods sold for May can be calculated by adding the cost of the finished goods Inventory at the beginning of May (which is zero in this case) to the cost of goods manufactured during May, and then subtracting the cost of the finished goods inventory at the end of May.
Since only one job was in process during May, and there were no finished goods inventory at the beginning of May, the cost of goods sold for May would be equal to the cost of that one job.
To calculate the cost of the job, we need to consider the manufacturing overhead applied and the actual manufacturing overhead.
Given that the company's total manufacturing overhead applied always equals its total actual manufacturing overhead, we can assume that the manufacturing overhead applied is equal to the actual manufacturing overhead.
Therefore, the cost of the job would be the sum of the direct materials, direct labor, and manufacturing overhead applied. These costs are not provided in the question, so we cannot determine the specific cost of the job.
As for the total value of the finished goods inventory at the end of May, it is not given in the question. Therefore, we cannot determine the specific value.
Lastly, the total value of the work in process inventory at the end of May is also not provided in the question. Therefore, we cannot determine the specific value.
In summary:
1. The cost of goods sold for May would be the cost of the one job that was in process during May. However, since the specific costs are not provided, we cannot calculate the exact amount.
2. The total value of the finished goods inventory at the end of May is not given in the question, so we cannot determine the specific value.
3. The total value of the work in process inventory at the end of May is also not provided, so we cannot determine the specific value.
To learn more about Inventory,
visit the link below
https://brainly.com/question/31827018
#SPJ11
At the beginning of the year, Mirmax set its predetermined overhead rate for movies produced during the year by using the following estimates:
Overhead costs $1,558,000
Direct labor costs $410,000
At year-end, the company's actual overhead costs for the year are $1,547,500
1. Determine the predetermined overhead rote using estimated direct labor costs.
2. Enter the actual overhead costs incurred and the amount of overhead cost applied to movies during the year using the predetermined overhead rate Determine whether overhead is over or under applied (and the amount) for the year.
3. Prepare the entry to close any over or under applied overhead to Cost of Goods
Subtract the projected overhead expenses from the anticipated direct labour costs to arrive at the predetermined overhead rate: Estimated overhead costs divided by estimated direct labour costs yields the predetermined overhead rate.
$1,558,000 divided by $410,000 is the predetermined overhead rate. 2. We must compare the actual overhead expenses incurred with the amount of overhead applied to films using the predefined overhead rate in order to assess if overhead is over or under applied: Real overhead expenses come to $1,547,500. Actual direct labour costs minus the predetermined overhead rate is the overhead cost. If the applied overhead cost is lower than the actual overhead expenses, there has been insufficient overhead. Overapplied overhead is indicated if the actual overhead costs are lower than the applied overhead costs. 3. To fix any improperly or excessively applied overhead We use the following entry to calculate the cost of goods: If there is insufficient overhead (applied overhead costs > actual overhead costs): Debit: Price of Goods Credit for Sale: Manufacturing Overhead If overhead costs were overcharged (applied overhead costs minus actual overhead costs).
learn more about costs here:
https://brainly.com/question/17120857
#SPJ11
Your firm purchases goods from its supplier on terms of 3/15, Net 40. a. What is the effective annual cost to your firm if it chooses not to take the discount and makes its payment on day 40 ? b. What is the effective annual cost to your firm if it chooses not to take the discount and makes its payment on day 50 ?
The effective annual cost to the firm is 3.09% if the payment is made on day 40, and it is 3.17% if the payment is made on day 50.
What is the effective annual cost to the firm if it chooses not to take the discount and makes its payment on day 40 or day 50?a. To calculate the effective annual cost to the firm if it chooses not to take the discount and makes its payment on day 40, we need to consider the cost of forgoing the discount. The terms 3/15, Net 40 indicate that a 3% discount is available if the payment is made within 15 days, otherwise, the full payment is due within 40 days.
If the firm chooses not to take the discount, it would have to pay the full amount on day 40. This means the payment is delayed by 25 days (40 days - 15 days).
To calculate the effective annual cost, we can use the formula:
Effective Annual Cost = (Discount % / (1 - Discount %))ˣ (365 / (Payment Period - Discount Period))
Using the given information, the effective annual cost would be:
Effective Annual Cost = (3% / (1 - 3%)) ˣ (365 / 25) = 0.0309 or 3.09%
b. If the firm makes its payment on day 50, the payment is delayed by 35 days (50 days - 15 days). Using the same formula as above, the effective annual cost would be:
Effective Annual Cost = (3% / (1 - 3%)) ˣ (365 / 35) = 0.0317 or 3.17%
Therefore, the effective annual cost to the firm if it chooses not to take the discount and makes its payment on day 40 is 3.09%, and if it makes the payment on day 50, it is 3.17%.
Learn more about effective annual cost
brainly.com/question/24173728
#SPJ11
A steel product is manufactured by starting with raw material (carbon steel wire) and then processing it sequentially through five operations using machines A to E, respectively (see table below). This is the only use that the five machines are put to. The hourly rates for each machine are given in the table. Answer the following questions. Use the original output rates to answer each question (i.e., disregard any changes mentioned in previous questions).
Operation: 1 2 3 4 5
Machine: A B C D E
Hourly unit output rate: 60 30 20 110 70
Consider the following questions.
a. What is the maximum output per hour of the steel product?
Maximum output per hour products
b.
By how much would the output be improved if B was increased to 110?
By products
c.
By how much would the output be improved if C was increased to 30?
By products
d.
By how much would the output be improved if C was increased to 40?
By products
e.
What is the effect on the system if machine A can only manage an output of 50 in one hour?
We lose products
f.
What is the effect on the system if machine C can only manage an output of 10 in one hour?
We lose products
g.
What is the effect on the system if machine B is allowed to drop to an output of 10 in one hour?
We lose products
a. The maximum output per hour of the steel product is 110 units.
The operation which has the highest hourly unit output rate is operation D with a rate of 110. Therefore, the maximum hourly output will be 110 units, as this is the operation with the highest output.
b. By increasing B to 110, the output will improve by 30 units per hour.
As machine B has an hourly unit output rate of 30, if it is increased to 110, the output will be improved by 110 - 30 = 80 units per hour.
c. By increasing C to 30, the output will improve by 10 units per hour.
As machine C has an hourly unit output rate of 20, if it is increased to 30, the output will be improved by 30 - 20 = 10 units per hour.
d. By increasing C to 40, the output will improve by 20 units per hour.
As machine C has an hourly unit output rate of 20, if it is increased to 40, the output will be improved by 40 - 20 = 20 units per hour.
e. If machine A can only manage an output of 50 in one hour, the system will lose 10 products per hour.
As machine A has an hourly unit output rate of 60, if it can only manage an output of 50, the system will lose 60 - 50 = 10 products per hour.
f. If machine C can only manage an output of 10 in one hour, the system will lose 10 products per hour.
As machine C has an hourly unit output rate of 20, if it can only manage an output of 10, the system will lose 20 - 10 = 10 products per hour.
g. If machine B is allowed to drop to an output of 10 in one hour, the system will lose 20 products per hour.
As machine B has an hourly unit output rate of 30, if it drops to 10, the system will lose 30 - 10 = 20 products per hour.
Know more about the maximum output click here:
https://brainly.com/question/32765352
#SPJ11
I want to understand the key competitors in Indian market for Godiva chocolate brand.
And how are this competitors positioned,innovations driving growth for them.
And what sets apart Godiva from its competitors in Indian market.
And how can godiva win over its competitors in india.
The key competitors for Godiva in the Indian market include Lindt, Ferrero Rocher, Cadbury, Nestle, and Hershey's. These competitors are positioned as established chocolate brands with a wide range of products and strong distribution networks. They drive growth through continuous innovation in flavors, packaging, and marketing strategies to cater to diverse consumer preferences.
Godiva sets itself apart from its competitors in the Indian market through its premium positioning and focus on high-quality, luxurious chocolates. Godiva is renowned for its rich Belgian chocolate heritage, use of premium ingredients, and exquisite packaging, which appeals to consumers looking for indulgent and upscale chocolate experiences. Additionally, Godiva's limited edition collections and collaborations with renowned designers and artists add a touch of exclusivity and uniqueness to its brand image.
To win over its competitors in India, Godiva can focus on several strategies. Firstly, it can leverage its premium positioning by highlighting its heritage, craftsmanship, and quality ingredients, emphasizing the superior taste and experience of its chocolates. Godiva can also invest in localizing its product offerings by introducing flavors and ingredients that resonate with Indian consumers' preferences, such as incorporating traditional Indian spices or incorporating regional flavors. Additionally, Godiva can strengthen its distribution network by expanding its presence in retail outlets and e-commerce platforms, making its products more accessible to a wider audience. Engaging in strategic partnerships with premium hotels, luxury retailers, or high-end cafes can also enhance brand visibility and reach.
Learn more about competitors here : brainly.com/question/30677524
#SPJ11
On November 30, Petrov Company has $128,700 of accounts receivable and uses the perpetual inventory system.
December 4 Sold $7,245 of merchandise (that had cost $5,000) to customers on credit, terms n/30.
December 9 Sold $20,000 of accounts receivable to Main Bank. Main charges a 4% factoring fee.
December 17 Received $5,859 cash from customers in payment on their accounts.
December 27 Borrowed $10,000 cash from Main Bank, pledging $12,500 of accounts receivable as security for the loan.
(1) Prepare journal entries to record the above transactions.
(2) Which transaction would most likely require a note to the financial statements?
(1) The journal entries to record the above transactions are shown below:November 30: Accounts Receivable (AR) ... 128,700 Sales Revenue ... 128,700December 4: Accounts Receivable ... 7,245 Cost of Goods Sold ... 5,000 Inventory ... 5,000 Sales Revenue ... 7,245December 9: Cash ... 19,200 Loss on Sale of Accounts Receivable ... 800 Accounts Receivable ... 20,000December 17: Cash ... 5,859 Accounts Receivable ... 5,859December 27: Cash ... 10,000 Notes Payable ... 10,000 Accounts Receivable ... 12,500(2)
The transaction that would most likely require a note to the financial statements is the sale of accounts receivable to Main Bank, which was recorded on December 9. This is due to the fact that the sale of accounts receivable will be reflected on the balance sheet and may raise concerns about the company's liquidity and financial health.
Learn more about Inventory here,https://brainly.com/question/26533444
#SPJ11
The real risk-free rate, r*, is 1.2%. Inflation is expected to average 1.1% a year for the next 4 years, after which time inflation is expected to average 3.6% a year. Assume that there is no maturity risk premium. A 9-year corporate bond has a yield of 11.3%, which includes a liquidity premium of 0.2%. What is its default risk premium? Do not round intermediate calculations. Round your answer to two decimal places.
The default risk premium of the 9-year corporate bond is 4.1%.
To calculate the default risk premium of the 9-year corporate bond, we need to subtract the risk-free rate, expected inflation rate, and liquidity premium from the bond's yield.
Given:
Real risk-free rate (r*) = 1.2%
Inflation rate for the next 4 years = 1.1%
Inflation rate after 4 years = 3.6%
Corporate bond yield = 11.3%
Liquidity premium = 0.2%
First, let's calculate the nominal risk-free rate:
Nominal risk-free rate = Real risk-free rate + Expected inflation rate
Nominal risk-free rate = 1.2% + 1.1%
Nominal risk-free rate = 2.3%
Next, let's calculate the total expected inflation rate:
Total expected inflation rate = Inflation rate for the next 4 years + Inflation rate after 4 years
Total expected inflation rate = 1.1% + 3.6%
Total expected inflation rate = 4.7%
Now, let's calculate the default risk premium:
Default risk premium = Corporate bond yield - Nominal risk-free rate - Total expected inflation rate - Liquidity premium
Default risk premium = 11.3% - 2.3% - 4.7% - 0.2%
Default risk premium = 4.1%
Therefore, the default risk premium of the 9-year corporate bond is 4.1%.
Learn more about default risk https://brainly.com/question/33556624
#SPJ11
An agent from Pyramid Life Insurance offers a product to you called the Safe Income Fund. The fund advertises an average return of 6% with no risk of loss of principal. The risk-free rate is 3% and the expected return on the market is 8%. What should you do? O a. short sell b. borrow and buy as much you can O c. don't buy d. buy a market-indexed portfolio e. buy as much as you can
Based on the given information, the most appropriate course of action would be to choose option (d) and buy a market-indexed portfolio.
Pyramid Life Insurance's Safe Income Fund promises to deliver an average return of 6% with no risk of principal loss. The risk-free rate and the anticipated market return should be taken into account, though. The risk-free rate, which is currently set at 3%, is the return on a risk-free investment, which is often thought of as holding government bonds. The average return investors can anticipate from investing in the larger market is 8%, which contrasts with the expected return on the market of 8%.
The average return of the Safe Income Fund, which is 6%, is below both the risk-free rate and the anticipated market return. This implies that the fund's return is not materially higher than the risk-free rate. Instead, it would be more prudent to consider option (d) and buy a market-indexed portfolio.
To know more about portfolio here https://brainly.com/question/25929259
#SPJ4
PROJECT MANAGEMENT
RENOVATING A HOME
Questions:
1. As a project manager, you realize there may be substantial resistance to changes brought about by renovating a home, describe any strategy or strategies you would employ to resolve this issue. (Make mention of any group from which this resistance may originate.)
2. After analyzing the project of renovating a home what TWO (2) risks have you identified and how would you respond to these risks as the project manager?
To address resistance to changes during home renovation, a strategy I would employ is effective communication and stakeholder engagement, ensuring that the concerns and expectations of the affected groups, such as homeowners, family members, or neighbors, are heard and addressed.
One potential risk in renovating a home is encountering unforeseen structural issues or hidden damage during the renovation process. To mitigate this risk, as a project manager, I would conduct a thorough inspection and assessment of the property before initiating the renovation. This would involve engaging qualified professionals, such as architects or structural engineers, to identify any potential risks or underlying problems. By proactively addressing these issues and developing contingency plans, the project can minimize delays and cost overruns.
Another risk could be the availability and timely delivery of construction materials and supplies. Delays or disruptions in the supply chain can impact the project schedule and budget. To mitigate this risk, I would implement effective procurement and supplier management strategies. This would involve identifying reliable suppliers, establishing clear communication channels, and monitoring the availability and delivery of materials closely. Additionally, maintaining a buffer stock or alternative sourcing options can help mitigate the impact of potential delays or shortages.
As a project manager, identifying and proactively addressing risks is crucial to the success of a home renovation project. By implementing appropriate mitigation strategies and closely monitoring potential risks, the project can stay on track, minimize disruptions, and ensure successful completion.
To learn more about project manager
brainly.com/question/29023210
#SPJ11
audit and assurance
(b) Define the term 'professional scepticism' and explain TWO (2) examples from the audit of Cang Sdn Bhd where the auditor should apply professional scepticism. [8 marks]
Professional scepticism is an essential mindset and attitude that auditors should adopt during the audit process.
It involves maintaining a questioning and critical mindset while objectively assessing the evidence gathered and the information provided by management. Professional scepticism helps auditors to remain independent, diligent, and objective in their assessment of financial statements and the underlying controls and transactions. Two examples of situations in the audit of Cang Sdn Bhd where the auditor should apply professional scepticism are: Revenue Recognition: The auditor should apply professional scepticism when reviewing the revenue recognition policies and practices of Cang Sdn Bhd. They should critically assess the appropriateness of revenue recognition criteria, including the timing and measurement of revenue. This may involve challenging management's assumptions, conducting additional testing, and obtaining corroborating evidence from external sources, such as customer contracts or third-party confirmations. Related Party Transactions: The auditor should exercise professional scepticism when reviewing related party transactions involving Cang Sdn Bhd. They should carefully scrutinize transactions with entities or individuals closely related to the company, such as directors, key management personnel, or significant shareholders. The auditor should independently assess the substance of these transactions, ensuring they are properly disclosed, at arm's length, and conducted on normal commercial terms. Professional scepticism would involve looking for any indicators of potential conflicts of interest or self-dealing that may impact the financial statements. In both of these examples, applying professional scepticism involves challenging the information provided, seeking corroborating evidence, and maintaining an objective and critical mindset throughout the audit process. This helps ensure the audit is thorough, independent, and provides reliable assurance on the financial statements of Cang Sdn Bhd.
Learn more about auditors here:
https://brainly.com/question/29350221
#SPJ11
According to A Guide to the Project Management Body of Knowledge (PMBOK Guide). (2017). The Project Management Institute:
"Projects drive change. Projects drive change in organizations. From a business perspective, a project is aimed at moving an organization from one state to another state in order to achieve a specific objective (see Figure 1-1). Before the project begins, the organization is commonly referred to as being in the current state. The desired result of the change driven by the project is described as the future state."
Questions:
1. Identify an activity that took place that you would classify as a project.
2. Explain why this activity would meet the benchmark of being classified as a project.
3. Explain what was the scope of this project?
4. Discuss at least TWO (2) ways in which this activity has led to, or may result in significant change.
5. As a project manager, you realize there may be substantial resistance to changes brought about by this project, describe any strategy or strategies you would employ to resolve this issue. (Make mention of any group from which this resistance may originate.)
6. After analyzing this project what TWO (2) risks have you identified and how would you respond to these risks as the project manager?
The implementation of a new software system in a business is an activity that can be considered a project.Because it involves a short-term project with a specific goal, this activity meets the definition of a project. Planning, executing, and monitoring a new software system's implementation require careful consideration. It has a characterized start and end date, explicit expectations, and dispensed assets. Additionally, it involves a group of people working together to achieve the desired result.
1. A task that can be considered a project: The construction of a brand-new hospital in a specific city is an activity that can be considered a project.
2. Because it possesses the following characteristics, the activity can be considered a project: A project's purpose is to accomplish a specific goal, which in this case is to build a hospital. Change is driven by projects, and the city's health care sector will be altered by the construction of a new hospital. The activity is only temporary and has a set beginning and ending date. The construction of a new hospital in a specific location is a one-of-a-kind project. The project necessitates the allocation of funds, human capital, and other resources.
3. The project's scope is: The construction of a brand-new hospital in a specific city is the project's scope. The goal of this project is to make sure that the city can get high-quality medical care. The design of the hospital, getting the necessary permits and approvals, gathering resources, and building the hospital are all parts of the project.
4. There are two ways this activity has changed or could change a lot: In the following ways, the construction of a new hospital will bring about significant change: It will make it possible for people living in that city and the surrounding areas to get access to high-quality health care services. Additionally, it will result in economic growth and job creation.
5. Strategies for dealing with the issue of significant resistance to the project's changes: There are a number of options available to you as a project manager to address the issue of resistance to project-induced changes. The following are some of the methods: putting together a comprehensive plan for managing change that takes into account the requirements of all stakeholders, including those who might resist the change. establishing open channels of communication with stakeholders to comprehend and appropriately address their concerns. putting into action a plan for engaging stakeholders that includes figuring out who the stakeholders are, what their needs and concerns are, and how they will be involved in the project. The gathering from which opposition might start incorporates the medical clinic staff who might be impervious to the progressions because of dread of employment cutback or changes in their jobs.
6. The two risks that this project has identified and the project manager's response to them: The following are two risks that this project has identified: Project delays and higher costs can result from failing to obtain the necessary permits and approvals on time. Another potential risk is whether or not the project can be funded. These dangers can be reduced by project managers: early on in the project, getting the necessary permits and approvals and communicating with the appropriate authorities to ensure a smooth process. developing a financial plan that includes funds for contingencies to cover unforeseen expenses and locating potential sources of funding
To know more about stakeholders refer to
https://brainly.com/question/25920099
#SPJ11
On the first day of the fiscal year, a company issues an $613,000, 10%, 5-year bond that pays semiannual interest of $30,650 ($613,000 x 10 % x 1/2). receiving cash of $576,200. Journalize the entry to record the first interest payment and the amortization of the related bond discount using the straight-line method. If an amount box does not require an entry, leave it blank. On the first day of the fiscal year, a company issues a $940,000, 10%, 5-year bond that pays semiannual interest of $47,000 ($940,000 x 10 % * 1/2), receiving cash of $884,176. Journalize the entry to record the issuance of the bonds. If an amount box does not require an entry, leave it blank.
Journal entry to record the first interest payment and the amortization of the related bond discount using the straight-line method:
Date: [Date of interest payment]
Interest Expense $30,650
Discount on Bonds Payable $650 ($613,000 - $576,200)
Cash $30,000 ($30,650 - $650)
[ The interest expense is calculated as $613,000 × 10% × 1/2. The discount on bonds payable is amortized by $650, which is the difference between the face value of the bond and the cash received. The net cash paid for the interest payment is $30,000.]
Journal entry to record the issuance of the bonds:
Date: [Date of bond issuance]
Cash $884,176
Discount on Bonds Payable $55,824 ($940,000 - $884,176)
Bonds Payable $940,000
[The cash received is $884,176. The discount on bonds payable is calculated as $940,000 - $884,176. The bonds payable is recorded at its face value of $940,000.]
Note: The straight-line method assumes that the bond discount is amortized evenly over the life of the bond. However, without specific information about the bond's issuance date and the interest payment date, it is not possible to determine the exact journal entry for the first interest payment and the amortization of the bond discount. The entries provided above are based on the assumption that the interest payment and bond discount amortization occur on the same date.
Learn more about interest here:
https://brainly.com/question/32190011
#SPJ11
What amount invested in a savings account that pays 8% interest annually is worth $215,892.50 after 10 years? 1202041 120204100078 12020
The amount invested in the savings account was approximately $96,310.77.
To calculate the amount invested in a savings account, we can use the formula for compound interest:
A = P(1 + r/n)^(nt)
Where:
A = Final amount after interest
P = Principal amount (initial investment)
r = Annual interest rate (as a decimal)
n = Number of times interest is compounded per year
t = Number of years
In this case, we are given:
A = $215,892.50
r = 8% = 0.08
t = 10 years
Let's assume the interest is compounded annually (n = 1). Now we can rearrange the formula to solve for P:
P = A / (1 + r/n)^(nt)
Plugging in the given values:
P = 215,892.50 / (1 + 0.08/1)^(1*10)
P = 215,892.50 / (1 + 0.08)^10
P = 215,892.50 / (1.08)^10
P ≈ $96,310.77
Therefore, the amount invested in the savings account was approximately $96,310.77.
Learn more about account here:
https://brainly.com/question/5640110
#SPJ11
Ashbury Corporation reports 2016 and 2017 total revenues of $86.4 million and $100.8 million respectively. If we expect prior growth to persist, we would forecast a revenue growth rate of: Select one: a. 14% b. None of these are correct c. 17% d. 34% e. 14%
Given the available answer options, none of them match the calculated growth rate of 16.67%. Therefore, the correct answer is b. None of these are correct.
To calculate the revenue growth rate, we need to determine the percentage change in revenue from 2016 to 2017.
First, we calculate the difference in revenue between the two years:
Change in revenue = 2017 revenue - 2016 revenue
= $100.8 million - $86.4 million
= $14.4 million
Next, we calculate the growth rate as a percentage of the 2016 revenue:
Revenue growth rate = (Change in revenue / 2016 revenue) * 100%
= ($14.4 million / $86.4 million) * 100%
≈ 0.1667 * 100%
≈ 16.67%
Therefore, the revenue growth rate, based on the given information, is approximately 16.67%.
None of the available answer options (a. 14%, c. 17%, d. 34%, e. 14%) match the calculated growth rate. Hence, the correct answer is b. None of these are correct.
To learn more about growth rate, Visit:
https://brainly.com/question/25849702
#SPJ11
Problem 2 National Instruments borrowed $5,200,000 from a private equity firm for expansion of its facility for manufacturing carbon monoxide monitors. The company repaid the loan after 1 year with a single payment of $5,630,000. What was the interest rate on the loan? Problem 3 Which of the following 1-year investments has the lowest rate of return: $12,000 that yields $950 in interest, $15,600 that yields $1200 in interest, or $620,000 that yields $58000 in interest?
For problem 2 the solution is 8.27%. and for problem 3 the investment with the lowest rate of return is the second one, with a rate of return of 7.69%.
Problem 2: To find the interest rate on the loan, we need to use the formula for simple interest. The formula is:
Interest = Principal x Rate x Time.
In this case, the principal is $5,200,000, the time is 1 year, and the interest is
$5,630,000 - $5,200,000 = $430,000.
Plugging these values into the formula, we get: $430,000 = $5,200,000 x Rate x 1. Solving for the rate, we find that the interest rate on the loan is 8.27%.
Problem 3: To determine the rate of return for each investment, we need to divide the interest earned by the principal and then multiply by 100 to get the rate as a percentage. For the first investment, $12,000 yielding $950 in interest, the rate of return is
(950 / 12,000) x 100 = 7.92%.
For the second investment, $15,600 yielding $1,200 in interest, the rate of return is
(1,200 / 15,600) x 100 = 7.69%.
For the third investment, $620,000 yielding $58,000 in interest, the rate of return is
(58,000 / 620,000) x 100 = 9.35%.
Therefore, the investment with the lowest rate of return is the second one, with a rate of return of 7.69%.
to know about interest rate visit:
https://brainly.com/question/28236069
#SPJ11
