Answer:
9.36 g
Explanation:
The equation of the reaction is;
C8H18(g) + 25/2 O2(g) ----> 8CO2(g) + 9H2O(g)
Number of moles of octane = 10.3g/ 114 g/mol = 0.09 moles
1 mole of octane yields 9 moles of water
0.09 moles of octane yields 0.09 × 9/1 = 0.81 moles of water
Number of moles of oxygen = 23g/32g/mol = 0.72 moles
12.5 moles of oxygen yields 9 moles of water
0.72 moles of oxygen yields 0.72 × 9/12.5 = 0.52 moles of water
Hence oxygen is the limiting reactant;
Maximum mass of water produced = 0.52 moles of water × 18 g/mol = 9.36 g
Consider reaction AgCIO3(aq)+Mgl2(aq)
Answer:
the product is Mg(Clo3)2 + AgI
the force of attraction between non polar molecules are what (a)electrovalent bond (b)covalent bond (c)Hydrogen bond (d)Van der waals forces
Answer:
d. van der waals force
Explanation:
Van der Waals force :
the weakest intermolecular forceand consist of dipole-dipole force and dispersion force.
9) Describe a method that could be used to extract lead from lead oxide (11). You will need
to include charcoal, an ignition (or test) tube and a Bunsen burner. Make sure
you include
each step and what safety measures you would take?
Answer:
Explained below.
Explanation:
In order to extract lead from lead oxide, we need to add carbon from coke to the lead oxide.
We will need;
A bunsen burner
A test tube
Charcoal
First step is to heat charcoal in an oxygen free environment. The safety measure here to ensure an oxygen free environment is to add some zinc metal powder into the test tube in order to remove any atmospheric oxygen inside the container.
Secondly, we will now put charcoal inside the test tube and turn on the bunsen burner to heat it until coke is formed.
Thirdly, we now introduce lead oxide into the coke inside the test tube and the carbon in the coke reacts with the lead oxide to produce lead and carbon dioxide.
Throughout all this process, since we required an oxygen free environment inside the test tube, whenever the test tube is opened, its neck must immediately be warmed by heat with the tube placed in a horizontal direction or very close to being in that horizontal direction so that any movement of air moves outwards from the tube.
How long must a 40.0 amp current flow through a solution of iron(III) chloride in order to produce 5.00 moles of iron?
Answer:
10.1 h
Explanation:
Let's consider the reduction half-reaction of iron from an aqueous solution of iron (III) chloride.
Fe³⁺(aq) + 3 e⁻ ⇒ Fe(s)
We can calculate the time required to produce 5.00 moles of Fe using the following relationships.
1 mole of Fe is produced when 3 moles of electrons circulate.1 mole of electrons has a charge of 96486 C (Faraday's constant).1 A = 1 C/s.1 h = 3600 s.[tex]5.00molFe \times \frac{3 mole^{-} }{1molFe} \times\frac{96486C}{1mole^{-} } \times \frac{1s}{40.0C} \times \frac{1h}{3600s} = 10.1 h[/tex]
Plz!!!!Plz!!!!!help help
Answer:
false
Explanation:
category 1 is the worst
list four energy resources
Answer:
Nuclear
Solar
Wind
Hydro
Geo-Thermal
Explanation:
Solar energy from the sun.Geothermal energy from heat inside the earth.Wind energyBiomass from plants.hope it helps
stay safe healthy and happy....Evaporation is commonly used to concentrate dissolved solids in a liquid feed stream and produce pure water vapor.
a. True
b. False
Answer:
True
Explanation:
Evaporation is the process by which a substance changes its state from liquid to gas. evaporation occurs at all temperatures but it's rate increases as temperature increases.
Pure water vapour can be produced by evaporation.
As the liquids are removed, the solids present in solution becomes more concentrated.
PLEASE ANSWER THESE:
Question 4: Biological Molecules (5 points)
A. Pepsin is an enzyme used by the human body to break down food in the stomach.
i. Explain, in terms of a chemical reaction, how pepsin helps a person. (3 points)
ii. What are the building blocks of the pepsin macromolecule? (2 points)
Answer: the answer is A
Explanation: add me hope i helped
In a single displacement reaction Zinc can displace ALL but…
Iron
Nickel
Calcium
Lead
Answer:
Calcium
Explanation:
Zinc cannot displace Ca because calcium is above it in the reactivity series
Which term can be used to describe the process in the reaction below? 2 NaHCO3 (s) → Na2CO3 (s) + H2O (g) + CO2 (g)
Answer:
Decomposition
Explanation:
If we look at the process;
2 NaHCO3 (s) → Na2CO3 (s) + H2O (g) + CO2 (g)
We can see that NaHCO3 was broken down into Na2CO3, H2O and CO2.
The breakdown of one compound to yield other chemical compounds is known as decomposition.
Hence the NaHCO3 was decomposed in the process above.
If a student drops 2.3g pieces of magnesium into a flask of hydrochloric acid, this reaction occurs: Mg + 2HCl= MgCl2 + H2
How many liters of hydrogen can be produced at a pressure of 2 atm and a temperature of 298 K
Answer:
1.2 L
Explanation:
Step 1: Write the balanced equation
Mg + 2 HCl ⇒ MgCl₂ + H₂
Step 2: Calculate the moles corresponding to 2.3 g of Mg
The molar mass of Mg is 24.31 g/mol.
2.3 g × 1 mol/24.31 g = 0.095 mol
Step 3: Calculate the moles of H₂ produced
0.095 mol Mg × 1 mol H₂/1 mol Mg = 0.095 mol H₂
Step 4: Calculate the volume occupied by the hydrogen
We will use the ideal gas equation.
P × V = n × R × T
V = n × R × T/P
V = 0.095 mol × (0.0821 atm.L/mol.K) × 298 K/2 atm = 1.2 L
Calculate the molality of a solution containing 22.75 g of glycerol (C3H8O3) in 79.6 g of ethanol (C2H5OH).
Answer:
3.11 mol/kg
Explanation:
Molality M = number of moles of solute, n/mass of solvent, m
To calculate the number of moles of glycerol (C₃H₈O₃) in 22.75 g of glycerol, we find its molar (molecular) mass, M',
So, M' = 3 × atomic mass of carbon + 8 × atomic mass hydrogen + 3 × atomic mass of oxygen
= 3 × 12 g/mol + 8 × 1 g/mol + 3 × 16 g/mol = 36 g/mol + 8 g/mol + 48 g/mol = 92 g/mol.
So, number of moles of glycerol, n = m'/M' where m' = mass of glycerol = 22.75 g and M' = molecular mass of glycerol = 92 g/mol
So, n = m'/M'
n = 22.75 g/92 g/mol
n = 0.247 mol
So, the molality of the solution M = n/m
Since m = mass of ethanol = 79.6 g = 0.0796 kg, substituting the value of n into the equation, we have
M = 0.247 mol/0.0796 kg
M = 3.11 mol/kg
So, the molality of the solution is 3.11 mol/kg.
How many atoms are in each elemental sample?
16.8 g Sr
26.5 g Fe
8.94 g Bi
40.0 g P
Explanation:
The number of atoms in 1mol of every element can be represented by Avogadro's number, which is [tex]6.022*10^{23}[/tex].
Knowing this, now we can find the atoms in each of these molecules!
[tex]16.8gSr*\frac{1molSr}{87.62gSr} *\frac{6.022*10^{23}atomsSr}{1molSr} =[/tex]
1.15*10^23 atoms of Sr
[tex]26.5gFe*\frac{1molFe}{55.85gFe} *\frac{6.022*10^{23}atomsFe}{1molFe} =[/tex]
2.86*10^23 atoms of Fe
[tex]8.94gBi*\frac{1molBi}{208.98gBi} *\frac{6.022*10^{23}atomsBi}{1molBi} =[/tex]
2.58*10^22 atoms of Bi
[tex]40.0gP*\frac{1molP}{30.97gP} *\frac{6.022*10^{23}atomsP}{1molP}=[/tex]
7.78*10^23 atoms of P
Identify the substance that conducts electricity.
a. Rubbing alcohol.
b. KBr dissolved in water.
c. Solid KBr.
d. Solid baking soda
e. Sugar dissolved in water.
Answer:
KBr dissolved in water.
Explanation:
A substance conducts electricity as a result of the presence of mobile ions in the substance.
An ionic substance such as KBr when dissolved in water releases free ions which become charge carriers in solution hence the solution conducts electricity. Solid ionic substances such as solid KBr and solid baking soda do not conduct electricity because the ions are strongly bound to each other in the crystal lattice.
Molecular substances such as sugar and alcohol do not conduct electricity even in solution.
Calculate the mass of water produced when 1.57g of butane reacts with excess oxygen
Explanation:
So, first you will want to write the balanced chemical equation for this reaction.
Butane = [tex]C_4H_{10}[/tex]
[tex]2C_4H_{10}+13O_2=>10H_2O+8CO_2[/tex]
^ This ends up being your balanced chemical equation. Now, you can do the math!
[tex]1.57gC_4H_{10}*\frac{1molC_4H_{10}}{58.12gC_4H_{10}}*\frac{10molH_2O}{2molC_4H_{10}}*\frac{18gH_2O}{1molH_2O}[/tex]
After plugging this into a calculator, your final mass of water should be:
2.43gH2O
What is the volume of a gas 622.7 mL at 25.1 C if the temperature is increased to 60.7 C without changing the pressure, what is the new volume of the gas?
A. 697
B. 556
C. 1510
D. 9.35
Answer:
A) 697 mL
Explanation:
First convert degrees Celsius to Kelvin.
That gives;
For T1; temp 1 (273 + 25.1)
= 298.1K
T2; temp 2 (273+60.7)
=333.7K
From the formula, (V1/T1) = (V2/T2)
To find V2 = (V1/T1) × T2
= (622.7/298.1) × 333.7.
= 697.06mL
~~ 697mL
g Write the balanced chemical equation to show the reaction between aqueous silver nitrate and an aqueous solution of barium chloride
Answer:
2AgNO3 + BaCl2 ------> 2AgCl + Ba(NO3) 2.
Explanation:
The precipitate of silver chloride and barium nitrate are formed when barium chloride reacts with silver nitrate. The balanced chemical equation for barium chloride and silver nitrate is 2AgNO3 + BaCl2 ------> 2AgCl + Ba(NO3) 2. In this reaction, two molecules of silver nitrate react with one molecule of barium chloride forming two molecules of silver chloride and one molecule of barium nitrate.
HELP ME PLEASE!!!!!!
I WANT IT AS PARAGRAPHHHHH NOT POINT AND ANSWER THIS TWO QUESTIONS AS 1 PARAGRAPH
One of the lab safety rules being violated is that Jodi doesn't have her hair tied up. She should have her hair tied up. Having her long hair not tied up or away from her face is a safety hazard. Jodi is also not wearing glasses, which is essential when working with chemicals. One of the Bunsen Burners aren't being used but it's on, which is a fire hazard.
Answer:
Jodi should wear her hair up to avoid a mishap, such as lighting her hair on fire. Then, instead of using a fire extinguisher on Jodi, Kimberly should use a fire blanket to prevent additional damage. Mac is preoccupied with a second flame and maybe Jodi without her safety goggles?
according to the kinetic molecular theory what happens to a liquid when it is transferred from one container to another
Answer:
See explanation
Explanation:
Liquids are known to have a definite volumes but not a definite shape. This means that a liquid takes on the volume of the container in which it is found.
Hence, when a liquid is transferred from one container to another, the volume of the liquid remains the same but the shape of the liquid changes.
This happens when the two containers do not possess the same shape.
compound of aspartame is a dipeptide that is often used as a sugar substitute which functional groups are present
Answer:
Carboxyl, primary amine, amide, ester, and phenyl.
Explanation:
The functional groups present in the compound of aspartame are carboxyl, primary amine, amide, ester, and phenyl. Aspartame is an artificial non-saccharide sweetener which is 200 times sweeter than sucrose. This aspartame is commonly used as a sugar substitute in many foods and beverages. It has the trade names such as NutraSweet, Equal, and Canderel.
What is the phase of water at 0.25 atm and 0°C?
Water
(liquid)
Pressure (atm)
0.5-
0.25
Ice
(solid)
Water vapor
(gas)
0
000
Temperature (°C)
O A. Gas
O B. Solid and gas
O C. Solid and liquid
D. Solid
Water is in the solid phase at 0.25 atm and 0°C.
In what phase is water at 25?A pressure of 50 kPa and a temperature of 50 °C correspond to the “water” region—here, water exists only as a liquid. At 25 kPa and 200 °C, water exists only in the gaseous state.
What phase is water in at 0 C?Under standard atmospheric conditions, water exists as a liquid. But if we lower the temperature below 0 degrees Celsius, or 32 degrees Fahrenheit, water changes its phase into a solid called ice.
Learn more about the solid phase here https://brainly.com/question/13396621
#SPJ2
Suppose a 0.042M aqueous solution of phosphoric acid (H3PO4) is prepared. Calculate the equilibrium molarity of HPO4^−2.
Answer:
2.89x10⁻⁵M = [HPO₄²⁻]
Explanation:
The equilibrium of H3PO4 in water occurs H2PO4-:
H3PO4(aq) + H2O(l) ⇄ H3O⁺(aq) + H2PO4⁻(aq)
pKa = 2.16. And as pKa = -log Ka; Ka = 10^-2.16
Ka = 6.9183x10⁻³ = [H3O⁺] [H2PO4⁻] / [H3PO4]
As both [H3O⁺] and [H2PO4⁻] comes from the same equilibrium,
[H3O⁺]=[H2PO4⁻] :
[H3O⁺] = X
[H2PO4⁻] = X
[H3PO4] = 0.042 - X
Where X is reaction coordinate
Replacing:
6.9183x10⁻³ = [X] [X] / [0.042 - X]
6.9183x10⁻³ = X² / 0.042 - X
2.905686x10⁻⁴ - 6.9183x10⁻³X - X² = 0
Solving for X:
X = -0.02M. False solution. There is no negative concentration.
X = 0.014M. Right solution
[H2PO4⁻] = 0.014M
In the second equilibrium:
H2PO4⁻(aq) + H2O(l) ⇄ HPO4-(aq) + H3O+(aq)
Based on the same principles of the last equilibrium:
pKa2 = 7.21
Ka2 = 6.166x10⁻⁸ = [HPO4-] [H3O+] / [H2PO4⁻]
[HPO4-] = X
[H3O+] = X
[H2PO4⁻] = 0.014M - X
6.166x10⁻⁸ = X² / [0.014M - X]
8.3623x10⁻¹⁰ - 6.166x10⁻⁸X - X² = 0
Solving for X:
X = -0.0000289485. False solution.
X =
2.89x10⁻⁵M = [HPO₄²⁻]An unknown weak acid with a concentration of 0.530 M has a pH of 5.600. What is the Ka of the weak acid
Answer:
Ka = 3.45x10⁻⁶
Explanation:
First we calculate [H⁺], using the given pH:
pH = -log[H⁺][H⁺] = [tex]10^{-pH}=10^{-5.6}[/tex] [H⁺] = 2.51x10⁻⁶ MTo solve this problem we can use the following formula describing a monoprotic weak acid:
[H⁺] = [tex]\sqrt{C*Ka}[/tex]We input the data that we already know:
2.51x10⁻⁶ = [tex]\sqrt{0.530*Ka}[/tex]And solve for Ka:
Ka = 3.45x10⁻⁶3)O que são políticas públicas?
Answer:
azertyuiopazertyuiiop
A product of homolytic fission can never be
a - charged
b - nucleophile
c- both
d-none of these
Answer:
both
Explanation:
A homolytic fission is said to have occurred when the breakage of a bond between two atoms leaves each of the bonding atoms with equal number of electrons. Homolytic fission often results in the creation of radicals.
Since homolytic fission yields two species with equal number of electrons(usually odd number of electrons), the products of such process can not be charged. They can not be nucleophiles because nucleophiles need to possess two electrons which can be shared with another chemical specie.
If you ran the reaction for this experiment and began with 65.0 mmol of isopentyl alcohol, how many grams of isopentyl acetate could you theoretically produce assuming only a 77.0% attainable yield
Answer:
6.52g = Actual yield (g)
Explanation:
The yield of a reaction is:
Percent yield = Actual yield (g) / Theoretical Yield (g) * 100
As 1 mol of isopentyl alcohol produce 1 mol of isopentyl acetate (Theoretical Yield), the theroretical yield of isopentyl acetate is 65.0mmol = 0.0650mol. To solve this question we need to convert the moles of isopentyl acetate to mass using its molar mass (130.19g/mol).
With the equation of percent yield we can find the mass obtained as follows:
Theoretical yield:
0.0650mol * (130.19g/mol) = 8.46g of isopentyl alcohol
Mass produced:
77 = Actual yield (g) / 8.462g * 100
6.52g = Actual yield (g)
The mass of isopentyl acetate that can be produced is 6.52 g
Balanced equationSee attached photo
From the balanced equation,
1 mole of isopentyl alcohol reacted to produce 1 mole of isopentyl acetate.
Therefore,
65 mmole (i.e 0.065 mole) of isopentyl alcohol will also react to produce 0.065 mole of isopentyl acetate.
How to determine the actual yield (in mole) Percentage yield = 77%Theoretical yield = 0.065 mole Actual yield =?Actual yield = percent × theoretical
Actual yield = 77% × 0.065
Actual yield = 0.05005 mole
How to determine the mass Mole of isopentyl acetate = 0.05005 mole Molar mass of isopentyl acetate = 130.19 g/molMass of isopentyl acetate =?Mass = mole × molar mass
Mass of isopentyl acetate = 0.05005 × 130.19
Mass of isopentyl acetate = 6.52 g
Learn more about stoichiometry:
https://brainly.com/question/14735801
Indicate type of chemical reactions for 2Mgl2+MN(SO3)2=2MgSO3+Mnl4
Answer:
double decomposition reaction
Draw the structure of the alkene with the molecular formula C6H10 that reacts with Br2 to give this compound.
Answer: Please, this question is not complete. I have attached the complete question.
The answer is in the attached picture below
Explanation:
The explanation is in the attached picture below
The structure of the alkene with the molecular formula [tex]C_6H_1_0[/tex] that reacts with [tex]Br_2[/tex]to give this compound is an alkene called 1-hexene
How do we explain?The alkene is called 1-hexene. It has a double bond between the first and second carbon atoms. When it reacts with Br2, the bromine atoms add to the double bond, resulting in the formation of 1,2-dibromohexane.
The reaction is a radical addition reaction. The first step is the formation of a radical by the homolytic cleavage of one of the bromine atoms in Br2. This radical then adds to the double bond in the alkene, forming a new radical. The second bromine atom then adds to the radical, forming 1,2-dibromohexane
Learn more about addition reaction at:
https://brainly.com/question/1433809
#SPJ6
(S)-Pentan-2-ol was treated sequentially with methanesulfonyl chloride (CH3SO2Cl) and then potassium iodide. What is the final product that forms
Answer:
(S)-Pentan-2-ol was treated sequentially with methanesulfonyl chloride (CH3SO2Cl) and then potassium iodide. What is the final product that forms
Explanation:
Alcohols are poor leaving groups.
To make -OH group a better-leaving group, it should be treated with sulfonyl chlorides.
Then, methane sulfonyl group makes will be substituted on the -OH group and forms sulfonyl esters and makes it a better leaving group.
After that treating with KI proceeds through nucleophilic bimolecular substitution and the final product formed is shown below:.
A solution of the ionic salt NaF
would have _____
pH.
A. An acidic
B. A basic
C. A neutral
Answer:
The answer is basic
Explanation:
Choose letter b or basic. You welcome.
The strong acid and strong base has high rate constant of dissociation. The rate constant for weak acid and base for the dissociation is low, they do not easily dissociate in water. Therefore option B is the correct option.
What are acid and base?Acid is a solution which releases H⁺ hydrogen ion when dissolved in water. Base releases hydroxide ion OH⁻ ion when dissolved in water.
pH is a measurement of amount of hydronium ion H₃O⁺ in a given sample. Strength of acidic nature is directly proportional to the concentration of hydronium ion.
On subtracting pH from 14, we get pOH which measures the concentration of hydroxide ion in a given solution. Temperature affect the pH. At room temperature pH scale is between 0 to 14. 7 is the pH of neutral solution. A solution of the ionic salt NaF is basic in nature.
Therefore, option B is the correct option.
To know more about acid and bases, here:
https://brainly.com/question/27228111
#SPJ2
