MARKING BRAINLIEST! please help asap (i just need B)

Cytochalasin b is a chemical that disrupts microfilament formation. With which aspect of cell division would cleavage furrow.

Cytochalasin B, the call of which comes from the Greek cities (cellular) and achalasia (relaxation),[1] is a mobile-permeable mycotoxin. It changed into found that substoichiometric concentrations of cytochalasin B (CB) strongly inhibit community formation by using actin filaments. Because of this, it is frequently utilized in cytological research.

Cytochalasin B inhibits glucose shipping[3] and platelet aggregation. It blocks adenosine-brought-on apoptotic body formation without affecting the activation of endogenous ADP-ribosylation in leukemia HL-60 cells.[4] it is also utilized in cloning through nuclear transfer. right here enucleated recipient cells are handled with cytochalasin B. Cytochalasin B makes the cytoplasm of the oocytes extra fluid and makes it possible to aspirate the nuclear genome of the oocyte within a small vesicle of plasma membrane right into a micro-needle.

Learn more about Cytochalasin b here:-https://brainly.com/question/2114724

#SPJ4

Disclaimer:- your question is incomplete, please see below for the complete question.

Cytochalasin b is a chemical that disrupts microfilament formation. With which aspect of cell division would cytochalasin b interfere?.

A) formation of the cell plate

B) binary fission

C) cleavage furrow

D) formation of the mitotic spindle

E) DNA replication

The molar concentration of a sugar solution is 0.3m. This beaker is sitting on your desk in the open air. The solute potential at 27 c will be 7.48.

The solute potential at 27 c- will be 7.48.

Concentration of the sugar solution, C = 0.3 M

Temperature, T = 27° C = 273 + 27 = 300 K

The solute potential is given as:

solute potential = - iCRT

i is the number of particles the particular molecule will make in water

i = 1 for sugar

R is the universal gas constant = 0.0831 liter bar/mole-K

on substituting the respective values, we get

solute potential = - 1 × 0.3 × 0.0831 × 300

or

The solute potential = - 7.479 ≈ - 7.48

The solute potential is equal to the water potential when no physical pressure is applied to a solution. A solution's water potential, or the ability for the water to flow and perform work, will change if physical pressure is applied to it.

Solute potential is the degree to which the water potential decreases as a result of the dissolution of a solute. When a solute is dissolved in water, fewer free water molecules are present, which lowers the molecules' kinetic energy. As a result, the solute potential decreases.

Learn more about solute potential:

https://brainly.com/question/28300184

#SPJ4

The amount of solid required to saturate the water is  0.28g

What do you mean by solubility?

The creation of a new bond between the molecules of the solute and the solvent is known as solubility.

Given:

weight of salt = 60 gram,

solubility = 48/100 = 0.48

Formula used

solubility of solute =weigh of  solute in saturated solution/weight of solvent in saturated solution×100

Let weight of the solute = x

By using formula

X =  0.48*60/100 = 0.28g

Hence, weight of solute in saturated solution = 0.28g

To learn more about Solubility concept Check the given link

https://brainly.com/question/23946616

#SPJ9

According to mole concept, 25 g sample of methyl alcohol  has 0.780  moles.

Mole is defined as the unit of amount of substance . It is the quantity measure of amount of substance of how many elementary particles are present in a given substance.

It is defined as exactly 6.022×10²³ elementary entities. The elementary entity can be a molecule, atom ion depending on the type of substance. Amount of elementary entities in a mole is called as Avogadro's number.

It is widely used in chemistry as a suitable way for expressing amounts of reactants and products.For the practical purposes, mass of one mole of compound in grams is approximately equal to mass of one molecule of compound measured in Daltons .Molar mass has units of gram per mole . In case of molecules, where molar mass  in grams present in one mole  of atoms is its atomic mass.

For the given problem, number of moles is calculated as, mass/molar mass

By substituting the respective values, 25/32.04=0.780 moles.

Hence, 25 g of methyl alcohol has 0.780 moles.

Learn more about mole concept,here:

https://brainly.com/question/12805690

#SPJ1

The total mass of atom is inside the nucleus. Inside the nucleus proton and neutron is there. Therefore, option B is correct option

Atom is the smallest particle of any matter. Atom combines to form element and element combine to form molecule or compound.

Atom consists of electron, proton and neutron. The total mass of atom is inside the nucleus. Inside the nucleus proton and neutron is there. So calculate mass of an atom, total mass of all protons is added to the total mass of neutron. Electrons revolve around the nucleus. So in our given diagram electron are inside the nucleus, which is wrong. Electron should be inside the cloud region and outside the nucleus region.

Therefore, option B is correct option

Learn more about atoms, here:

https://brainly.com/question/13518322

#SPJ1

Answer:

hope this helps!::

Explanation:

Microbiology is the study of microorganisms including, bacteria, viruses, algae, fungi and protozoa. Microorganisms are most famous for their ability to cause disease, however, microorganisms are also vital to agriculture, industry and ecology. In fact, life on Earth would not survive without microorganisms. Studying microorganisms will help scientists see how the human cells react to diseases, poison, etc.

A and B are two imaginary substances. The molecules of substance A have weak electrical forces between them. The molecules of substance B have very strong electrical forces linking them. Substance A boils at a lower temperature.

Boiling is the process in which a liquid changes into a gas at its boiling point, which is the temperature at which its vapor pressure equals the atmospheric pressure. The boiling point of a substance is influenced by various factors, including the strength of the forces between its molecules.

In substance A, the molecules have weak electrical forces between them. These weak intermolecular forces imply that the molecules are not strongly attracted to each other. As a result, less energy is required to break these weak forces, and the substance can transition from a liquid to a gas more easily. Therefore, substance A will have a lower boiling point compared to substance B.

In substance B, the molecules have very strong electrical forces linking them. These strong intermolecular forces indicate that the molecules are strongly attracted to each other. Consequently, more energy is required to overcome these strong forces during the boiling process, making the substance have a higher boiling point.

Therefore, substance A, with weak intermolecular forces, would boil at a lower temperature, while substance B, with very strong intermolecular forces, would boil at a higher temperature.

To know more about electrical forces here

https://brainly.com/question/20935307

#SPJ2

A 0.522 g sample of a metal, m, reacts completely with sulfuric acid according to M(s) + H₂SO₄(aq) → MSO₄ + H₂(g), a volue of 241 mL of hydrogen is collected over water, the water level in the collecting vessel is same as the outer level, atmospheric pressure is 756.0 torr, and the temperature is 25°C, the vapor pressure of water at 25°C is 23.8 torr. Therefore, the molar mass of the metal is 58 g/mol.

We will assume that the hydrogen is an ideal gas. The equation of ideal gas is given as -

PV = nRT

where,

P is pressure,

V is volume,

n is number of moles,

R is gas constant, R = 0.082 atm.L/mol K

T is the temperature

We know that,

P = 756.0 = 0.995 atm

V = 241 mL = 0.241 L

T = 25ºC + 273 = 298 K

0.995 x 0.241 = n x 0.082 x 298

n = 0.995 x 0.241

      0.082 x 298

n = 0.2397

      24.436

n = 0.009 mol

To calculate the molar mass, we will use

Number of moles = Given mass

                                 Molar mass

Molar mass = Given mass

                       no. of moles

Molar mass = 0.522 g/mol

                       0.009

Molar mass = 58 g/mol

Hence, the molar mass of the metal is 58 g/mol.

To learn more about molar mass,

brainly.com/question/13832826

#SPJ1

Option a) is correct - if the volume of this reaction at chemical equilibrium is increased, the reaction will shift to the left in the direction of the reactants.

When considering the effect a change in volume or pressure will have on the system that is in chemical equilibrium, it is very important to take into account the aggregate state of all the reaction components. The rule is that the increase in volume will result in the reaction shifting in the direction with more gaseous particles.

So, we analyze our reaction - on the left side we have 5 gaseous particles in total (3 hydrogen sulfide molecules and two oxygen molecules). On the right side, we have either two (if the water is liquid) or four (if the water is also in the vapor phase).

Since we have more molecules in the gaseous phase on the left side of the reaction, if we increase the volume, the reaction will shift to the left, in the direction of the reactants (option a).

You can learn more about chemical equilibrium here:
brainly.com/question/3920294

#SPJ4

In this balanced equation Reactants and products are equal in the chemical reaction.

When heated limestone decomposes into calcium oxide and carbon dioxide. It is a decomposition reaction in which calcium carbonate decomposes and carbon dioxide gas is generated. Calcium oxide is the second product of the reaction. A chemical reaction that produces two or more products from one reactant is called a decomposition reaction.

The answer is the decomposition reaction. The starting material for the reaction is calcium carbonate. Calcium carbonate decomposes to produce calcium oxide and carbon dioxide gas. The balance of carbon atoms and the balance of the number of oxygen atoms in oxygen atoms. This reaction is therefore balanced. That's right, 1 molecule of calcium carbonate 1 molecule of hair 1 molecule of calcium oxide, and 1 molecule of carbon dioxide. So the coefficient for carbon dioxide is 1.

Learn more about The balanced equation here:-https://brainly.com/question/11904811

#SPJ1

The s and p are the two sub shells which are added to find the number of valence electrons.

A valence electrons is defined as the negatively charged particles of an atom that must lose or gain to reach the inert gas electronic configuration. Valence electrons are located at the outermost shell of an atom.

Example: Oxygen which has an atomic number 8. And the electronic configuration of oxygen is 2,6 that means oxygen has 6 Valence Electrons in its outermost subshell. Out of 6, 2 Valence Electrons are in 2s subshell and 4 Valence Electrons are in 2p subshell.

Learn more about Valence Electrons here: https://brainly.com/question/2114505

#SPJ13

answer and explanation

the first step is to balance the reaction equation

N₂ + 2O₂ > 2NO₂

now that we have balanced the equation we can calculate the number of moles of nitrogen

mols = mass / molar mass

= 62.7 g/ 14.00g/mol

= 4.48 mols

we see from the balanced equation that the mol ratio of nitrogen and nitrogen oxide is 1:2

therefor the number of mols of nitrogen oxide that will form will be

2 x 4.48 = 8.96 mol of nitrogen oxide.

now that we have the mols we can then calculate the volume using the ideal gas equation

PV =nRT

V = (nRT)/P

= (8.96 x 0.0821 x 620) / 0.72

= 633.5L

Answer:

Explanation:

Conceptually, ionization energy is the opposite of electronegativity. The lower this energy is, the more readily the atom becomes a cation

When Benzoic Acid reacts with aqueous NaOH, a species of ester and Benzene named, Benzoate Ion is formed.

When Benzoic acid is reacted with aqueous NaOH, water and Sodium benzoate is formed.

Sodium benzoate is present with water, So, the sodium benzoate dissolves in water and forms benzoate ion.

Benzoate are species of ester.

Benzoate ion is soluble in water while benzoic acid is not soluble in water.

Benzoic acid forms a layer over water.

Benzoate is of great use in industrial purposes, it is used in food preservative and beauty products.

To know more about Benzoate, visit,

https://brainly.com/question/6471624

#SPJ4

The type of reaction that is occurring, given the equation is single replacement reaction

This is a reaction in which an element is replaced by another element which is higher in the electrochemical series. The following gives a better understanding of single replacement reaction.

CD + A -> AD + C

From the above, we can see that A has replaced C to produce AD

With the above idea, we can answer the question given as follow:

Co + 2AuNO₃ -> Co(NO₃)₂ + 2Au

We can see that Co replaces Au in the equation.

Thus, we can conclude that the reaction is single replacement reaction

Learn more about single replacement reaction:

https://brainly.com/question/7039713

#SPJ1

Moles of helium is required to blow up a balloon to 87.1 liters at 74 C and 3.5 atm is  021.65 mole

Mole is the unit of amount of substances of specified elementary entities

According to the ideal gas law he number of moles of a gas n can be calculated knowing the partial pressure of a gas p in a container with a volume V at an absolute temperature T from the equation

n =pV/RT

Here given data is volume = 87.1 liters

Temperature = 74 °C means 347.15 k

Pressure = 3.5 atm

R = 0.0821

Putting this value in ideal gas equation then

n =pV/RT

n =  3.5 atm×87.1 liters / 0.0821 ×347.15 k

n = 021.65 mole

Moles of helium is required to blow up a balloon to 87.1 liters at 74 C and 3.5 atm is  021.65 mole

Know more about mole of helium

https://brainly.com/question/23365554

#SPJ1

Answer:It explodes

Explanation:Based on the 4Fe 302 and 203 The Fe explodes if mixed together

the relative mass of propylene (c₃h₆) is 42.1 g/mol. the  carbon atoms does a polypropylene molecule with a molar mass of 42.1 kg/mol contain 3000 atoms

42.1 kg / 1 molecule * 1000 / 1 kg = 4100 g / molecule

formula of propylene = C3H6

number of moles of propylene = 42100 / 42.1

                                                    = 1000 mole

number of propylene molecules =  1000 * 6.023 * 10^23

                                                        = 6.023*10^26

so, total carbon atom in the given propylene = 3 * 6.023* 10^26

                                                                           = 1.087*10^27

learn more about mass of propylene here :

https://brainly.com/question/26587572

#SPJ4

Molar mass of each compounds are given below:

A substance's molar mass is the weight in grams of one mole of the compound.

(1) Sodium Hydroxide (NaOH)

In NaOH one sodium atom (Na) , one oxygen atom (O) and one hydrogen atom (H) are present.

Molar mass of Na = 22.989g/mol

Molar mass of O = 15.999 g/mol

Molar mass of H = 1.008 g/mol

So, molar mass of Sodium hydroxide (NaOH) = (22.989+15.999+1.008) g/mol = 39.996 g/mol.

(2) Glucose ([tex]C_{6}H_{12}O_{6}[/tex])

In Glucose six carbon atoms (C) , six oxygen atoms (O) and twelve hydrogen atoms (H) are present.

Molar mass of C = 12.001 g/mol

Molar mass of O = 15.999 g/mol

Molar mass of H = 1.008 g/mol

So, molar mass of Glucose = (12.001*6)+(15.999*6)+(12*1.008) g/mol = 180.156 g/mol

(3) Calcium sulphate ([tex]CaSO_{4}[/tex])

In Calcium sulphate one calcium atom (Ca) , four oxygen atoms (O) and one sulphur atom (S) are present.

Molar mass of Ca = 40.078 g/mol

Molar mass of O = 15.999 g/mol

Molar mass of S = 32.065 g/mol

So, molar mass of Calcium sulphate = (40.078)+(15.999*4)+(32.065) g/mol = 136.14 g/mol

(4) Magnesium phosphate [[tex]Mg_{3}(PO_{4})_{2}[/tex]]

In Magnesium phosphate three magnesium atom (Mg) , eight oxygen atoms (O) and two phosphorus atom (P) are present.

Molar mass of Mg = 24.305 g/mol

Molar mass of O = 15.999 g/mol

Molar mass of P = 30.974 g/mol

So, molar mass of Magnesium phosphate = (3*24.305)+(15.999*8)+(30.974*2) g/mol = 262.86 g/mol

To know more about molar mass refer to,

https://brainly.com/question/837939

#SPJ9                                                                          

Answer:

see below

Explanation:

Answer:

10^25
Simplify:

10x10^12 = 10^13
1x10^12 = 10^12
Steps:
10^12 * 10^13 = 10^25

8) The solubility of a solute is the maximum amount of that solute that will dissolve in a certain quantity of solvent under a certain temperature.

9) substance is completely consumed in a chemical reaction is limiting reactant.

The solubility of a solute is the maximum amount of a solute that can dissolve in a certain quantity of solvent and this depends on both the nature of solute and the nature of solvent under certain temperature and pressure.

In a chemical reaction , the substances that are completely used up when the reaction is finished is called as limiting reagent or limiting reactant.

Thus, 8) The solubility of a solute is the maximum amount of that solute that will dissolve in a certain quantity of solvent under a certain temperature.

9) substance is completely consumed in a chemical reaction is limiting reactant.

To learn more about Limiting reagent here

https://brainly.com/question/11848702

#SPJ1

Gas Vol1 = 0.341L

Temp1 = ?

Gas Vol2 = 0.156L

Temp2 = 32°c + 273 = 305K

If amount of gas and pressure remain constant,

Ideal Gas Equation - PV = nRT

PV = nRT represents the ideal gas equation. P is for ideal gas pressure, V for ideal gas volume, n stands for the total amount of ideal gas measured in moles, R stands for the universal gas constant, and T stands for temperature.

Ideal gas, sometimes known as perfect gas, is a gas that physically complies with the ideal, or general, gas law, a particular idealized relationship between pressure, volume, and temperature.

V ∝ T (n, R, P constant)

So, V1 / T1 = V2 / T2 [V/T = constant]

Temp1 = (T2*V1) / V2

   = (305 * 0.341) / 0.156

   = 666.70 K - 273

  = 393.67 °c

To know more about Ideal Gas Equation, click on the link below:

https://brainly.com/question/27870704

#SPJ4

Answer:

The law is the mathematical explanation of a natural phenomenon while a theory can be the best possible explanation of a natural phenomenon.

Explanation:

The law is:

The mathematical explanation of a natural phenomenon.

Law is accepted by all scientists.

Law is a certain truth and never replaced.

Example: Law of motion, Law of independent assortment.  

The theory is:

The best possible explanation of a natural phenomenon.

There can be many theories for the same phenomenon.

Theory can be replaced with a better one.

Example: Theory of relativity, Germ theory of disease.

On the basis of the above explanation, we can conclude that the law is the mathematical explanation of a natural phenomenon while a theory can be the best possible explanation of a natural phenomenon

Match the terms to their definition

1. Membrane -complex carbohydrate found in plant cell walls

2. Chloroplast -  an organelle responsible for photosynthesis; commonly found in plants, algae, and some bacteria

3. Grana - containing discs inside a chloroplast

4. Middle lamella - layer between primary cell walls of adjacent plant cells

5. Plasmodesmata -  tiny holes in a cell wall which allow the passage of chemicals between cells

6. Stroma - thick fluid found inside the inner membrane of a chloroplast

7. Turgor - normal state of internal pressure in a plant cell

8. Vacuole - bound organelle used for storage

Membrane is found in cell in which they separate the interior of cell from outside the environment and chloroplast is the type of plastid in which energy of the sun is converted into chemical energy for growth and grana are the little plates on which photosynthesis are responsible and  the middle lamella is a layer that cements together the primary cell walls of two adjoining plant cells and plasmodesmata are intercellular organelles found only in plant and algal cells and stroma is the fluid filling up inner space of chloroplast which incircle grana and thylakoids and turgor pressure is the hydrostatic pressure in excess of ambient atmospheric pressure which can build up in living and vacuole is the membrane bound cell organelles which is used for storage

Know more about defination of given term

https://brainly.com/question/8796676

#SPJ1

With the aid of a transport molecule, chemicals can be transported across a biological membrane from a region of higher concentration to an area of lower concentration.

The process of spontaneous passive transport of molecules or ions across a biological membrane by certain transmembrane integral proteins is known as facilitated diffusion. It is sometimes referred to as facilitated transport or passive-mediated transport.

The passage of certain chemicals through protein channels to traverse cell membranes. It is a sort of passive transport, thus it is not quite diffusion. proteins for transport. proteins that assist in moving materials across cell membranes and throughout the body.

Facilitated diffusion is demonstrated by the movement of amino acids and glucose into cells from the circulation. These molecules are ingested by active transport in the small intestine and subsequently released into the circulation.

Thus, the chemicals can be transported across a biological membrane from a region of higher concentration to an area of lower concentration.

Learn more about facilitated diffusion follow the link below;

https://brainly.com/question/18122054

#SPJ12

A closed water bottle has a pressure 1.5 atm, and a volume of 2.0 L. The water bottle is squeezed, to a new volume of 1.0 L. the new pressure of the water bottle is 3 atm.

given that :

pressure P1 = 1.5 atm

pressure P2 = ?

volume V1 = 2.0 L

volume V2 = 1.0 L

using the formula of Boyles Law, we get

P1 V1 = P2V2

P2 = (P1 V1) / V2

substituting the value in the formula,

P2 = ( 1.5 × 2.0 ) / 1.0

P2 = 3 atm

Thus, A closed water bottle has a pressure 1.5 atm, and a volume of 2.0 L. The water bottle is squeezed, to a new volume of 1.0 L. the new pressure of the water bottle is 3 atm.

To learn more about Boyles law here

https://brainly.com/question/14098065

#SPJ1

The maximum wavelength of light that can do this is  2.76 x 10⁻¹⁶ m.

The maximum wavelength of light is the maximum distance the light can travel at the given energy, which is determined by applying the following equation.

E = hf

E = hc/λ

where;

λ = hc / E

λ = (6.626 x 10⁻³⁴ x 3 x 10⁸) / (7.21 x 10⁻¹⁰)

λ = 2.76 x 10⁻¹⁶ m

Learn more about wavelength here: https://brainly.com/question/10728818

#SPJ1