Match each air mass type with the source region where the air mass is most likely to have formed.
Answers
Answer: Wow that is hard
Explanation:
Related Questions
An organism has a diploid number of 60. What is the organism's haploid
number?
Ο
Α. 120
Β. 15
Ο ΟΟΟ
C. 30
Ο
D. 60
Answers
If an organism has a diploid number of 60, then its haploid number is 30. Thus, C is the correct option.
The term "diploid" describes how many complete sets of chromosomes there are in each cell of an organism: diploid cells have two entire sets(or 2n number). On the other hand, haploid organisms only have one complete set of chromosomes (or n number).
So if diploid number is 60, i.e., 2n=60, then the haploid number is
n=[tex]\frac{60}{2}[/tex] ⇒ n= 30.
Learn more about chromosomes at:
https://brainly.com/question/29786859
If an organism has a diploid number of 60, its haploid number would be 30. Therefore, the correct statement is option C.
What is diploid number?The diploid number is the total number of chromosomes present in a cell equal to the number of chromosomes present in each homologous pair. If the organism has 60 diploid number, then 30 chromosomes are inherited from each parent.
The haploid number to the number of chromosomes present in a gamete of the organism. Gametes only contain one set of chromosomes, therefore, the haploid number will be half of the diploid number, i.e. 30.
The haploid number is half the diploid number because during meiosis, the number of chromosomes is reduced by half. The haploid number is important because it determines the number of chromosomes in the offspring of sexual reproduction.
Therefore, if an organism has a diploid number of 60, its haploid number would be 30.
Learn more about diploid number here:
https://brainly.com/question/27752997
#SPJ2
In 4 or more complete sentences, describe the process of protein synthesis and explain how transcription and translation creates protein
Answers
Protein synthesis occurs in the cell and is divided into 2 stages, namely transcription and translation. The process of transcription occurs in the cell nucleus by copying the genetic code in DNA and forming mRNA strands which are duplicates of DNA.
The RNA strands that are formed will come out of the cell nucleus and then undergo a translation process that occurs in the cytoplasm. With the help of ribosomes, the amino acids will line up according to the sequence of the genetic code in the mRNA to form polypeptide chains that make up the protein structure.
What is protein synthesis?
Protein synthesis is the formation of proteins in the human body and occurs in the smallest units, namely cells. Protein synthesis is divided into 2 stages, in the following order:
1. Transcription
Transcription is the process of copying the genetic code or DNA that occurs in the cell nucleus or nucleus. The process of copying the genetic code is carried out by unbinding the DNA with the help of RNA polymerase, then forming a copy of the genetic code that is complementary to the sequence of hydrogen bases in the DNA. The process of transcription produces a strand of genetic code called mRNA or RNAd.2. Translation
Translation is the process of translating the genetic code contained in the mRNA and occurs in the cytoplasm. With the help of the ribosome, the mRNA will be translated and the amino acids will move towards the ribosome. Amino acids will form a sequence that is complementary to the mRNA so that a polypeptide strand that makes up the protein molecule is formed.Learn more about Protein synthesis at https://brainly.com/question/15404950
#SPJ1
1. Transcription:
Transcription is the first step in protein synthesis and takes place in the nucleus of eukaryotic cells or in the cytoplasm of prokaryotic cells. It involves the conversion of genetic information from DNA into a complementary RNA molecule. Here's how it works:
a. DNA unwinding: An enzyme called RNA polymerase binds to a specific region of the DNA molecule known as the promoter. The DNA molecule unwinds at this site.
b. Complementary RNA synthesis: RNA polymerase reads the DNA template strand and synthesizes a complementary RNA molecule, using adenine (A), cytosine (C), guanine (G), and uracil (U) as the RNA bases, instead of thymine (T). This newly formed RNA molecule is called messenger RNA (mRNA).
2. Translation:
Translation is the second step in protein synthesis and occurs in the cytoplasm, specifically at the ribosomes. It involves the conversion of the mRNA molecule into a functional protein. Here's how it works:
a. Initiation: The ribosome attaches to the mRNA molecule at a specific start codon (usually AUG), signaling the beginning of translation.
b. Elongation: Transfer RNA (tRNA) molecules bring amino acids to the ribosome, guided by the mRNA codons. These tRNA molecules have anticodons that complement the mRNA codons.
c. Peptide bond formation: As the ribosome moves along the mRNA molecule, it catalyzes the formation of peptide bonds between the amino acids carried by tRNA molecules. This forms a growing polypeptide chain.
d. Termination: Translation continues until a stop codon (UAA, UAG, or UGA) is encountered on the mRNA. At this point, a release factor binds to the ribosome, leading to the release of the completed polypeptide chain.
In summary, protein synthesis begins with transcription, where DNA is transcribed into mRNA. Then, during translation, the mRNA is decoded by ribosomes, and amino acids are linked together to form a polypeptide chain, which eventually folds into a functional protein. This intricate process ensures that the genetic information encoded in DNA is faithfully converted into the proteins that carry out essential functions within cells and organisms.
This weather map showed the temperature (in °F) in the United States on a winter day. It also includes two pressure systems, labeled "H" and "L." Explain where weather fronts are most likely located, and predict the weather at each pressure system.
Read the assignment carefully and make sure you answer each part of the question or questions.
After you've written your response, go back and read it again to make sure your thoughts are clear.
Please someone answer I need help.
Answers
Answer: The Low Pressure systems will usually be found more North where it gets verycold but can really happen anywhere, and High pressure systems are usually found in the Southwest during winter.
Explanation:
High Pressure:A high pressure system has higher pressure at its center than the areas around it. Winds blow away from high pressure. Swirling in the opposite direction from a low pressure system, the winds of a high pressure system rotate clockwise north of the equator and counterclockwise south of the equator. This is called anticyclonic flow. Air from higher in the atmosphere sinks down to fill the space left as air is blown outward. On a weather map, you may notice a blue H, denoting the location of a high pressure system.
Low Pressure:
A low pressure system has lower pressure at its center than the areas around it. Winds blow towards the low pressure, and the air rises in the atmosphere where they meet. As the air rises, the water vapor within it condenses, forming clouds and often precipitation. Because of Earth’s spin and the Coriolis effect, winds of a low pressure system swirl counterclockwise north of the equator and clockwise south of the equator. This is called cyclonic flow. On weather maps, a low pressure system is labeled with red L.
The central dogma of molecular biology states that DNA İS
into mRNA, which
is then translated into polypeptides,
2 Eukaryotic ribosomes exist freely floating in the and membrane-bound.
3. In peptide synthesis, after an amino acid has been added to the polypeptide chain,
the empty exits the ribosome.
Pen foster
Answers
Answer:
is then translated into polypeptides,
Explanation:
The central dogma includes two processes: Transcription where the sequence of genes found in the double strand of DNA is transcribed to sequences of single-strand RNA forming mRNA. Translation where the mRNA sequence is translated to amino acids. Amino acids are then linked together to form polypeptides.
Scientists study how radioactive isotopes in rocks, such as carbon-14, decay to tell the age of the rock.
Does knowing the half-life of carbon 14 help scientists determine the absolute or relative age of a rock? State your claim. Use evidence to support your claim and explains your reasoning.
Please help before Feb 14 (thats when this is due) thank you!
there are 5 lines for me to write so try to stretch it out
Answers
Answer:
When the isotopes decay, scientists can find out how old the rock is depending on the radioactive isotope's half-life.
Explanation:
Radioactive isotopes are unstable and will decay. For example, when humans die carbon-14 decays. The isotopes will decay into a stable isotope over time. Scientists can tell how old the rock was from looking at the radioactive isotope's half-life, which tells them how long it would take for there to be half the radioactive isotope and half the stable isotope. At the next half-life there will be 25% of the radioactive isotope and 75% of the stable isotope. At the next half life there will be 12.5% radioactive and 87.5% stable.
Example:
Carbon-14 is a radioactive isotope with a half life of 5,730 years. How old would carbon-14 be when there is 75% carbon-14 in the rock?
75% is half of the time before the half-life, so it would be 2,365 years.
Hope this helps. Half life helps scientists find how much the isotope has decayed and the age of the rock.
Whatever is ⬆️ there
Could someone help me with this?
15 grams of hydrogen and 7.5 grams of oxygen were placed in a beaker. An explosion happened inside the baker that produced water. The beaker was never opened. How many grams of water were produced?
Answers
Answer:16.8768g
Explanation:
An air mass classified as cT usually forms over which type of earth surface
Answers
Answer:
Explanation:
An air mass classified as cT (Continental Tropical) usually forms over land masses in tropical regions. The warm, dry air of a cT air mass is typically formed over desert or semi-desert regions in the subtropics, where temperatures are high and evaporation rates are low. The air mass picks up heat from the ground and becomes warm and dry, leading to the development of stable, stratified atmospheric conditions. This type of air mass is often associated with clear skies and calm winds, and is often seen as a precursor to hot, dry weather in many regions.
Can someone please describe in four sections what is happening in the images below. I think it is active transport
Answers
Answer:
Explanation: energy is transferring to the sun
24 POINTS I NEED HELP NOW!
Write a testable question that could be used to further investigate the topic of resources and populations of organisms.
Are there any other questions you can test about resource use in another ecosystem? Resources include air, space, water, mates, and shelter too.
Answers
A solid is a state of matter that has a(n) a. Indefinite volume and an indefinite shape. B. Definite volume and a definite shape. C. Definite volume and an indefinite shape. D. Indefinite volume and a definite shape
Answers
Answer:
B . Definite volume and definite shape
Explanation:
Explain the difference between 'magnetic' and 'magnetised'
Answers
Answer:
Magnetic refers to a material's ability to produce a magnetic field. All magnets are magnetic, but not all materials are magnetic. Some common examples of magnetic materials include iron, nickel, and cobalt.
Magnetized, on the other hand, refers to a material that has been subjected to an external magnetic field, causing the material's electrons to align and produce a magnetic field of their own. This magnetic field will persist even after the external magnetic field has been removed. So, a material can be magnetic and not magnetized, or it can be magnetic and magnetized.
Explanation:
In summary, magnetic refers to a property of a material, while magnetized refers to a state of a material that has been subjected to an external magnetic field.
The poles of this kind of magnet can be altered with the flow of current The poles of this kind of magnet cannot be changed.
Can someone help me with this description of active transport.
You have to describe what is happening in the picture.
Answers
Answer: Just explain what you see and how it effects your description.
Explanation: I'm pretty sure all you have to do is show how energy effects the positions and movement of active transport.
2nd image: the molecules that are passing through the protein channel are using the energy to make the pathway bigger for them to fit
3rd image: the pathway became bigger
4th image: after the molecules got passed through the protein channel, it came back to its normal size
The addition of yeast into bread dough makes it raised by increasing its volume, and the growth of fungus takes place on bread slide when it is left for a longer time in moisture. A researcher took samples from the dough of bread on slide A, and from old bread on slide B. The researcher observed the growth of these organisms under the microscope. What type of asexual reproduction might have been observed by the researcher on both the slides?
Answers
Answer:
The correct answer is 'Saccharomyces cerevisiae'.
Explanation:
Bread dough is made using yeast. As the dough ferments, carbon dioxide is created and trapped as microscopic air bubbles. It increases as a result. The expansion of carbon dioxide during baking allows the bread to rise higher. Baker's yeast, commonly known as Saccharomyces cerevisiae, is used to make many different bakery goods in addition to bread.
It is employed in the fermentation process, which yeast performs on the sugar and starch in the flour. Fermentation transforms the starch into alcohol and carbon dioxide.
After baking, the carbon dioxide in the dough gives the bread its softness and fluffy texture. It also causes the dough to rise.
Could someone help me with this?
Rust is formed when iron reacts with the oxygen in moist air. Suppose 100 g of iron metal rusts. We weigh the rust and find that the rust has a mass of 143 g. What mass of oxygen reacted with the iron?
Answers
Answer:
Rust is a type of corrosion that occurs when iron reacts with the oxygen in moist air. Rust forms an oxide layer on the surface of metal objects, which can weaken them and cause them to break down over time. In order for rust to form, a reaction must take place between iron and oxygen molecules in the presence of water or moisture.
Suppose 100 g of iron metal rusts and we weigh it afterwards find that the mass has increased by 43 g; this means that 43g worth of material was added during this reaction process - i.e., 43g worth of oxygen reacted with 100g worth if iron during this particular instance! This calculation can be used as an example for any other similar scenario where one wishes to calculate how much mass (in grams)of oxygen reacted with some given amount (in grams)of Iron metal: simply subtracting initial weight from final weight yields us our desired result!
In conclusion, when Iron reacts with Oxygen in moist air it forms Rust; using basic math concepts such as subtraction we are able to determine how much mass (in grams)of Oxygen actually reacted with some given amount(also measured in terms if Grams!) Of Iron Metal - so long as we know both initial & final weights before & after oxidation takes place respectively!.
Explanation:
mark me as brainly plsssssss
Answer:Rust is a type of corrosion that occurs when iron reacts with the oxygen in moist air. Rust forms an oxide layer on the surface of metal objects, which can weaken them and cause them to break down over time. In order for rust to form, a reaction must take place between iron and oxygen molecules in the presence of water or moisture.
Suppose 100 g of iron metal rusts and we weigh it afterwards find that the mass has increased by 43 g; this means that 43g worth of material was added during this reaction process - i.e., 43g worth of oxygen reacted with 100g worth if iron during this particular instance! This calculation can be used as an example for any other similar scenario where one wishes to calculate how much mass (in grams)of oxygen reacted with some given amount (in grams)of Iron metal: simply subtracting initial weight from final weight yields us our desired result!
In conclusion, when Iron reacts with Oxygen in moist air it forms Rust; using basic math concepts such as subtraction we are able to determine how much mass (in grams)of Oxygen actually reacted with some given amount(also measured in terms if Grams!) Of Iron Metal - so long as we know both initial & final weights before & after oxidation takes place respectively!.
Explanation:
please answer these question
Answers
The door was able to stay closed because of the magnetized strip.
Could someone help me with this?
Rigo left 62 grams of ice in a closed container. When's he came back he found that the ice had melted. How much water would he be expected to have in the container?
Answers
What is the relationship between changes in air pressure and wind speeds?
A: When a high- and a low-pressure air mass are far apart, air moves quickly from low to high pressure.
B: When a high- and a low-pressure air mass are far apart, air moves quickly from high to low pressure.
C: When a high- and a low-pressure air mass are close together, air moves slowly from high to low pressure.
D: When a high- and a low-pressure air mass are far apart, air moves slowly from high to low pressure.
Answers
Answer: Option A
Explanation: When a high- and a low-pressure air mass are far apart, air moves quickly from low to high pressure. This is because air moves from areas of low pressure to areas of high pressure due to differences in air pressure.
In low pressure, air rises and rotates fast in the high atmosphere, forming fast winds. In high pressure, the air sinks instead of rising, forming slow-moving air currents or slow wind. A low pressure system brings rain, snow, and high winds, while a high-pressure system brings cold air.
Use the Punnett square to determine the ratio of offspring with: Brown body and red eyes : Brown body and brown eyes : Black body and red eyes : Black body and brown eyes :
Answers
The Punnett square shows us how te genes are distributed among the offsprings.
What does the Punnett square show?Your question is incomplete but I will tell you something about how the Punnett square works.
A Punnett square is a graphical representation of the possible genetic outcomes of a cross or mating between two individuals. It is used in genetics to predict the frequency of different traits in the offspring produced from a genetic cross.
The Punnett square is set up as a grid, with one parent's alleles along the top and the other parent's alleles along the side. The alleles from each parent are combined in each box of the grid to represent the possible genetic outcome for a single offspring. The frequency of each outcome can be determined by counting the number of times that each combination appears in the grid.
Learn more about Punnet square:https://brainly.com/question/23535291
#SPJ1
