Na3N decomposes to form sodium and nitrogen gas at STP. If 13.7 L of nitrogen is produced
how many moles of Na3N was used? (22.4 L = 1 mole of any gas)
2Na3N --> 6Na + N2

Answer:

[tex]\huge\color{cyan}{\colorbox{magenta}{Answer}}[/tex]

thank you

Answer:

0.250L of solution. 0.250 moles of solute.

Explanation:

As you can see in the image, there is a beaker with an amount of solution. 1/2L are 500mL and each line of the beaker represents 100mL. That means the volume of the solution is approximately 250mL = 0.250L

Molarity is an unit of concentration defined as the moles of solute per liter of solution. A solution that is 1.000M contains 1.000 moles of solute per liter of solution.

As the volume of the solution is 0.250L, the moles are:

0.250L * (1.000mol/L) = 0.250 moles of solute

Explanation:

H2O water molecule

O3 Ozone

are some of common example of molecules

Answer:

D Period 1, Group 18

Explanation:

it's helium

it's top right corner of the periodic table

Answer:

In nomenclature of simple molecular compounds, the more electropositive atom is written first and the more electronegative element is written last with an -ide suffix.

The Greek prefixes are used to dictate the number of a given element present in a molecular compound.

Prefixes can be shortened when the ending vowel of the prefix “conflicts” with a starting vowel in the compound.

Common exceptions exist for naming molecular compounds, where trivial or common names are used instead of systematic names, such as ammonia (NH3) instead of nitrogen trihydride or water (H2O) instead of dihydrogen monooxide.

Terms

nomenclatureA set of rules used for forming the names or terms in a particular field of arts or sciences.

electronegativeTending to attract electrons within a chemical bond.

electropositiveTending to not attract electrons (repel) within a chemical bond.

Chemical Nomenclature

The primary function of chemical nomenclature is to ensure that a spoken or written chemical name leaves no ambiguity concerning to what chemical compound the name refers. Each chemical name should refer to a single substance. Today, scientists often refer to chemicals by their common names: for example, water is not often called dihydrogen oxide. However, it is important to be able to recognize and name all chemicals in a standardized way. The most widely accepted format for nomenclature has been established by IUPAC.

Molecular compounds are made when two or more elements share electrons in a covalent bond to connect the elements. Typically, non-metals tend to share electrons, make covalent bonds, and thus, form molecular compounds.

Rules for Naming Molecular Compounds:

Remove the ending of the second element, and add “ide” just like in ionic compounds.

When naming molecular compounds prefixes are used to dictate the number of a given element present in the compound. ” mono-” indicates one, “di-” indicates two, “tri-” is three, “tetra-” is four, “penta-” is five, and “hexa-” is six, “hepta-” is seven, “octo-” is eight, “nona-” is nine, and “deca” is ten.

If there is only one of the first element, you can drop the prefix. For example, CO is carbon monoxide, not monocarbon monoxide.

If there are two vowels in a row that sound the same once the prefix is added (they “conflict”), the extra vowel on the end of the prefix is removed. For example, one oxygen would be monooxide, but instead it’s monoxide. The extra o is dropped.

Generally, the more electropositive atom is written first, followed by the more electronegative atom with an appropriate suffix. For example, H2O (water) can be called dihydrogen monoxide (though it’s not usually). Organic molecules (molecules made of C and H along with other elements) do not follow this rule.

Here are the prefixes in naming molecular compounds:

Mono- 1

Di- 2

Tri- 3

Tetra- 4

Penta- 5

Hexa- 6

Hepta- 7

Octa- 8

Nona- 9

Deca- 10

Molecular compounds are named using a systematic approach of prefixes to indicate the number of each element present in the compound.

I hope it helps ●~●

Answer:

This is the chemical formula for calcium phosphate:

[tex]Ca_3(PO_4)_2[/tex].

Calculate the mass percent of oxygen in calcium phosphate. Round your answer to the nearest percentage

Explanation:

The molar mass of calcium phosphate is: 310.18g/mol.

In one mole of calcium phosphate there are 8 moles of oxygen atoms.

The atomic mass of oxygen in calcium phosphate is: 128.0 g

Hence, the mass % of oxygen in the given compound is:

[tex]mass% of Oxygen =\frac{mass of oxygen}{mass of calcium phosphate}*100\\&=\frac{128.0g}{310.18g} *100\\&=41.3[/tex]

Hence,mass%of oxygen is 41.3.

Answer:

No

Can't understand.

Pls follow me and Mark as brainliest Plsssssssss.

Answer:

1. False

2. True

3. False

4. False

5. True

6. False

7. True

8. True

9. True

[tex]\huge\fcolorbox{red}{pink}{Answer ♥}[/tex]

Solutions for Neutralization of Acidic Lakes. ... A common solution to increase water hardness in acid lakes is to add lime, a high-alkalinity calcium compound to the acid lakes. This method is only temporary and very expensive, as it often needs to be applied every year.

Hope it helps uh ✌️✌️

Answer: The molarity of 198 g of barium iodide [tex](BaI_{2})[/tex] in 2.0 L of solution is 0.253 M.

Explanation:

Given: Mass = 198 g

Volume = 2.0 L

Molarity is the number of moles of solute present in liter of a solution.

Moles is the mass of a substance divided by its molar mass. So, moles of barium iodide (molar mass = 391.136 g/mol) is calculated as follows.

[tex]Moles = \frac{mass}{molar mass}\\= \frac{198 g}{391.136 g/mol}\\= 0.506 mol[/tex]

Now, molarity is calculated as follows.

[tex]Molarity = \frac{moles}{Volume (in L)}\\= \frac{0.506 mol}{2.0 L}\\= 0.253 M[/tex]

Thus, we can conclude that the molarity of 198 g of barium iodide [tex](BaI_{2})[/tex] in 2.0 L of solution is 0.253 M.

Answer:

2.2 × 10⁻³ mol

Explanation:

Step 1: Calculate the number of equivalents in 0.50 L of blood

The blood calcium level of 8.8 meq/L.

0.50 L Blood × 8.8 meq/L = 4.4 meq = 4.4 × 10⁻³ eq

Step 2: Calculate the number of moles of calcium

Calcium has a charge of 2. Thus, it has 2 equivalents per mole.

4.4 × 10⁻³ eq × 1 mol/2 eq = 2.2 × 10⁻³ mol

Answer:

[tex]12H2O + 2(SO3)2 -> 3(SO4)2[/tex]

Explanation:

see below. This was balanced using the the aggregate redox species method, or ARS for short.

The balanced half equation of the given reaction can be written as:

[tex]SO_3^{2-} + H_2O \longrightarrow SO_4^{2-} +2H^+ +2e^-[/tex]

A chemical equation can be defined as the expression of a reaction in terms of chemical symbols of the elements. A chemical equation of the reaction involves reactants and formed products.

The chemical equation of the reaction in which the number of atoms of the elements is the same on both sides of the chemical equation is a balanced chemical equation.

According to the law of conservation of mass, the total mass of the elements on the reactant side and product side should be the same in a balanced equation.

Given the equation is  SO₃²⁻  →  SO₄²⁻

To balance the oxygen on both sides add water:

H₂O + SO₃²⁻  →  SO₄²⁻

To balance the hydrogen on both sides add H⁺:

H₂O + SO₃²⁻  →  SO₄²⁻ + 2H⁺

To balance the charges, add electrons:

H₂O + SO₃²⁻  →  SO₄²⁻ + 2H⁺ + 2e⁻

Learn more about the balanced chemical equation, here:

brainly.com/question/15052184

#SPJ2

Answer:

1 C10H16 + 8 Cl2 --> 10 C + 16 HCl

Answer:

Longer

Explanation:

:)

Answer:

Shift it toward the side with lower total mole concentration

Explanation:

The reaction will shift in a direction that is less affected by stress, so that the pressure is reduced. This means that the reaction will change towards where there is fewer gas molecules (the fewer gas molecules, the smaller the pressure).

Answer:

A. Shift it toward the side with lower total mole concentration

Explanation:

Answer:

C. Chemical reactions may have deteriorated the rubber

Explanation:

A tire ages with time and most of the time this happens due to chemical reactions in the rubber parts. This could happen faster due to heat and sun.

As a tire is deteriorating or aging, a chemical change happens. What happens is that more chemical bonds are going to be produced with time between the molecules. We call this the process of oxidation. This actually bad for the tire, because the rubber would turn out to be stuffs d strong causing the tires thread to separate and also disintegration would occur.

Answer:

liquid  B

Explanation:

because B has a lower bp it needs less time and energy to turn into vapour and is collected into the condenser first

Answer:

Isotope 2

Explanation:

Isotope 2 is the most abundant. Its percent abundance is 78.68% which is the largest percentage, and therefore the most common of the isotopes presented.

Good luck!

Explanation:

Answer:

Unicellular organisms consist of only one cell and multicellular organisms consist of many cell.

Explanation:

Living things made up of a cell are called unicellular beings. They are very small and simple. In other words, unicellular organisms are those that are formed only by a single cell in which all the vital functions necessary for life are produced. For this reason, they are mostly microscopic organisms. Examples of unicellular organisms are viruses or bacteria.

Multicellular organisms are made up of a large number of cells. They present, therefore, a greater complexity than unicellular organisms in terms of the functions they develop. All current multicellular organisms come from a single cell, that is, they begin their life being unicellular. That is, they are formed from a zygote. Some examples of multicellular organisms are mammals, fungi, and mosses.

So, unicellular organisms consist of only one cell and multicellular organisms consist of many cell.

Answer:

it adds to scientific knowledge

Answer:

C.faste-moving lava flows and explosion of cinder

Answer: b and d

Explanation:

1×10^-3=1×1/10³=1×1/1000=1/1000 so b is correct

1×10^-3=1/1000=0.001

so d is correct

Answer:

mg2+ because it is a very good idea

Answer:

False

Explanation:

No, the mass of an electron is not equal to the mass of a neutron. Mass of neutron is greater than the mass of an electron.

Answer:

the reaction is spontaneous

Answer:

valence

Explanation:

the level of energy electrons have within a general shape the energy level is valence.

Answer:

0.512 M

Explanation:

We'll begin by calculating the number of mole in 12 g of C₂H₆O₄. This can be obtained as shown below:

Mass of C₂H₆O₄ = 12 g

Molar mass of C₂H₆O₄ = (2×12) + (6×1) + (4×16)

= 24 + 6 + 64

= 94 g/mol

Mole of C₂H₆O₄ =?

Mole = mass /molar mass

Mole of C₂H₆O₄ = 12 / 94

Mole of C₂H₆O₄ = 0.128 mole

Next, we shall convert 250 mL to L. This can be obtained as follow:

1000 mL = 1 L

Therefore,

250 mL = 250 mL × 1 L / 1000 mL

250 mL = 0.25 L

Thus, 250 mL is equivalent to 0.25 L.

Finally, we shall determine the molarity of the solution. This can be obtained as follow:

Mole of C₂H₆O₄ = 0.128 mole

Volume = 0.25 L

Molarity =?

Molarity = mole /Volume

Molarity = 0.128 / 0.25

Molarity = 0.512 M

Thus, the molarity of the solution is 0.512 M