The idea of a “specific object” suggests that Judd no longer produces art, per se, but actual items.
What is center of the galaxy?
A supermassive black hole is located at the center of the Galaxy. Measurements of the velocities of stars located within a few light-days of the center show that the mass inside their orbits around the center is about 4.6 million MSun.Astronomers believe that supermassive black holes lie at the center of virtually all large galaxies, even our own Milky Way. Astronomers can detect them by watching for their effects on nearby stars and gas.The centre of the galaxy is a dense and chaotic place, with stars and gas hurtling around the Milky Way's supermassive black hole, Sagittarius A*. It has a mass more than 4 million times the mass of the sun crammed into a diameter just about 30 times the sun's width.
To learn more about galaxy refers to:
https://brainly.com/question/20189338
#SPJ4
when the silver was filtered from the solution, dried, and weighed, the mass was actually found to be 420g. explain why there might be this difference between the expected and actual values. [2 marks]
Loss of material during filtration, Incomplete drying, Impurities in the solution, Accuracy of measurements, and Instrumental error are some of the reasons due to difference between actual and expected values when silver is filtered.
Reasons for difference in values in filtration of silver:
Loss of material during filtration: Some of the silver might have remained stuck to the filter paper, or it might have been lost in the filtrate. This would result in a lower actual mass.Incomplete drying: If the silver was not completely dried before weighing, it might contain some water, which would add to its mass. This would result in a higher actual mass.Impurities in the solution: The solution might contain impurities that were not taken into account when calculating the expected mass of silver. These impurities would increase the actual mass.Accuracy of measurements: The expected mass of silver was calculated based on the volume and concentration of the silver solution, but any inaccuracies in these measurements would also affect the expected mass.Instrumental error: The scale used to weigh the silver might not have been calibrated correctly or might have had some other error, leading to an incorrect actual mass.Learn more about filtration here:
https://brainly.com/question/18874756
#SPJ4
You are a member of an alpine rescue team and must get a box of supplies, with mass 3.00 kg , up an incline of constant slope angle 30.0 ∘ so that it reaches a stranded skier who is a vertical distance 2.60 m above the bottom of the incline. There is some friction present; the kinetic coefficient of friction is 6.00×10−2. Since you can't walk up the incline, you give the box a push that gives it an initial velocity; then the box slides up the incline, slowing down under the forces of friction and gravity. Take acceleration due to gravity to be 9.81 m/s2 .
Use the work-energy theorem to calculate the minimum speed v that you must give the box at the bottom of the incline so that it will reach the skier.
Express your answer numerically, in meters per second.
You must give the box the minimum speed of 4.56 m/s at the bottom of the incline so that it will reach the skier.
What is law of conservation of energy?Energy cannot be created or destroyed, according to the law of conservation of energy. However, it is capable of change from one form to another.
From the work-energy theorem, it can be written that
μ × mg × sinθ × h/sinθ + mgh = 1/2 mv²
v²/2 = gh (1 + μ)
v = √{2gh (1 + μ)}
= √{ 2 × 9.81 × ( 1 + 0.06)}
= 4.56 m/s
Hence, you must give the box the minimum speed of 4.56 m/s .
Learn more about energy here:
https://brainly.com/question/1932868
#SPJ1
if a juggler throws a ball straight up at a speed of 25 m/s, how long will it take to come back down?
If a juggler throws a ball straight up at a speed of 25 m/s, it will take 5.10 second to come back down.
What is velocity?The rate at which a body's displacement changes in relation to time is known as its velocity. Velocity is a vector quantity with both magnitude and direction. SI unit of velocity is meter/second.
Initial upward speed of the ball: v = 25 m/s.
Acceleration due to gravity: g = 9.8 m/s²
Hence, time taken by the ball = 2v/g
= ( 2 × 25)/9.8 second
= 5.10 second.
Learn more about velocity here:
https://brainly.com/question/18084516
#SPJ1
when carts of unequal mass push away from each other, which cart has more momentum, the heavy or the light cart? explain your answer in 1-2 sentences
The correct answer is both carts have the same momentum, though the cart that has larger mass will move slower than the cart that has smaller mass.
How momentum and mass are connected?
The initial and final momentums will equal one another in accordance with the law of conservation of momentum. As a result, the momentum of both carts should be equal. Since the beginning value is zero, the momentum of the two carts should be identical. Both carts are moving at the same speed, but the one with more mass will go more slowly than the one with less mass. The result is a balance between the two masses.
Hence , both carts have the same momentum, though the cart that has larger mass will move slower than the cart that has smaller mass.
To learn more about momentum and mass from the given link
https://brainly.com/question/6391301
#SPJ4
correct answerrr is a ?
Answer:
2 A
Explanation:
Remember V= IR
Then V/R = I
12 v / 6 ohm = 2 A
for quantities of power, electrical voltage, frequency (clock speeds), is it more common to see prefixes represent powers-of-2 or powers-of-10?
For quantities like power electric voltage frequency it is more common to see prefixes represent the power of minus 2 and minus 10 because it makes the data more accurate.
When you measure the quantities which are very difficult to measures and at the same time getting high Precision and accuracy we use the concept of using the prefixes to represent the power of -2 and -10.
Usually for frequencies we use the powers of -10 and 4 quantities like power and electric voltage we use the prefixes like the power of -2.
The reason for this is very simple because it makes the data accurate and easy to understand for the person operating on the devices.
To know more about Precision and accuracy, visit,
https://brainly.com/question/5792909
#SPJ4
the diameter of the he nucleus is about 2.0 fm f m . assuming the nucleus to be a sphere, calculate its density in g/cm3 g / c m 3 . express your answer in grams per cubic centimeter.
The density of the helium nucleus which has a diameter of 2 fm is 1.59 x 10¹² g/cm³
The diameter of the helium nucleus = 2.0 x 10⁻¹⁵ m
= 2 x 10⁻¹² cm
The radius of the helium = 1 x 10⁻¹² cm
The volume of the helium nucleus can be found using the formula,
V = 4/3πr³
= 4/3 x 3.14 x (1 x 10⁻¹²)³
= 4.17 x 10⁻³⁶ cm³
The density of the helium nucleus can be found using the formula,
d = m/v
where d is the density of the helium nucleus
m is the mass of the nucleus
v is the volume of the nucleus
Let us substitute the known values in the above equation, we get
d = 6.64 × 10⁻²⁴ / 4.17 x 10⁻³⁶
= 1.59 x 10¹² g/cm³
Thus, the density of the helium nucleus is 1.59 x 10¹² g/cm³
Learn more about the density in
https://brainly.com/question/15164682
#SPJ4
what particle is transferred from one reactant to another in oxidation-reduction reactions?
Electrons are transferred from one reactant to another in oxidation-reduction reactions.
Oxidation-reduction (redox) reactions are chemical processes that involve the transfer of electrons from one reactant to another. In a redox reaction, one reactant is oxidized, meaning it loses electrons, while the other reactant is reduced, meaning it gains electrons.
These electron transfers are essential for energy production in cells and for a variety of chemical processes. Redox reactions are also responsible for the corrosion of metals, the tarnishing of silver, and many other everyday occurrences.
To know more about Oxidation, click here.
https://brainly.com/question/16976470
#SPJ4
violins in the month of July. In the month of August they decreased their sales by 495 violins. By what percent did they decrease their monthly sales of violins from July to August ?
The percent that the monthly sales in violins decreased by from July to August was 49. 5 %
How to find the percentage decrease ?The percentage decrease in the sale of violins can be found by the formula:
= Number violins reduced by / Number of violins sold in July x 100 %
July violins sold = 1, 000
Number of violins reduced by = 495 violins
The percentage decrease is:
= 495 / 1, 000 x 100 %
= 49. 5 %
Find out more on percentage decrease at https://brainly.com/question/16629401
#SPJ1
The first part of the question is:
The Music Shop sold 1, 000 violins in the month of July.
which conditions would not typically be considered a safety concern relative to grounds?
Grounds that are isolated or insulated are typically not considered a safety concern.
Grounds refer to the electrical connection between a conductor and the earth. In electrical systems, a ground is used to provide a reference point of zero potential, which helps to maintain electrical safety.
However, not all grounds are equal and some conditions can pose a safety concern. For example, a ground that is in direct contact with a source of electrical energy, such as a live wire, can be dangerous because it can cause electrical current to flow into the ground, potentially causing an electrical shock or fire.
To learn more about safety concern, visit:
https://brainly.com/question/11667546#
#SPJ11
what equipment permitted the first direct measurement of plate movement
The equipment which permitted the first direct measurement of plate movement is Global positioning system (GPS). The correct option is D.
The Global Positioning System (GPS) enables the direct measurement of plate motion. Geodesy is the science of measuring the positions and shapes of the Earth. This network of satellites is more stable than the Earth's surface, so when a whole continent moves somewhere at a few centimetres per year, GPS can tell.
A significant obstacle to comprehending plate tectonics is measuring the velocity of the plates in relation to one another. Seismometers have been used by scientists for a long time to track vibrations brought on by plate motion, especially during significant occurrences like earthquakes.
The question is incomplete. The complete question contains options. They are 'A. Satellite laser ranging (SLR) B. Light detection and ranging (LIDAR) C. Echo sounding D. Global positioning system (GPS)'
To know more about plate movement:
https://brainly.com/question/14614577
#SPJ4
Write the factors on which drag depends.
Answer:
Explanation:
The drag depends upon mainly four factors:
1) Size of the object
2) Shape of the object
3) Speed of the object
4) Nature of the object
Hope this helps. Mark me the BRAINLIEST!!
determine the magnitude of the resultant force of the two forces acting on the sign at point a .
The magnitude of the resultant force of the two forces acting on the sign at point a is 759.46N.
Now, b=3.4m
The overall force acting on the item or body, along with the direction in which the body is moving, is referred to as the resultant force. When the object is stationary or moving at the same speed as the object, the resultant force is zero. Since all of the forces are acting in the same direction, the combined force should be equal for all of the forces.
Now, force is [tex]F_{c}=F_{c}u_{c}[/tex]
[tex]F_{c}=400\times\frac{(0-5)i+(-2-0)j+(3.4-0)k}{\sqrt{5^{2} +2^{2} +3.4^{2} } }[/tex]
which gives, [tex]F_{c}=-314i-125.6j+213.54k[/tex]
Force [tex]F_{B}=F_{B}u_{c}[/tex]
[tex]F_{B}=400\times\frac{(0-5)i+(2-0)j+(3.4-0)k}{\sqrt{5^{2} +2^{2} +3.4^{2} } }[/tex]
which gives,[tex]F_{B}=-314i+125.6j+213.54k[/tex]
Resultant Force is given by,
[tex]F_{R} =F_{B} +F_{C}[/tex]
[tex]F_{R}=-314i-125.6j+213.54k-314i-125.6j+213.54k[/tex]
[tex]F_{R}=-628i+427.08k[/tex]
Magnitude of the resultant force,
[tex]F_{R}=\sqrt{628^{2} +427.08^{2} }[/tex]
[tex]F_{R}=759.46N[/tex]
Learn more about force
brainly.com/question/26115859
#SPJ4
Question)- Determine The Magnitude Of The Resultant Force Of The Two Forces Acting On The Sign At Point A.Express your answer to three significant figures and include the appropriate units.what energy is produced by a 200 w lightbulb lit for 2.5 hours? answer in units of j.
The energy produced by a 200 W light bulb after 2.5 hours of use is 1,800,000 J.
Energy (J) = Power (W) x Time is the formula for computing energy from power and time (s). Power is the rate of energy production or consumption, commonly expressed in watts (W), and time is the length of time.
The following formula can be used to determine how much energy a 200 W light bulb produces over the course of 2.5 hours:
Energy (J) equals Power (W) times Time (s)
We must first translate 2.5 hours into seconds:
2.5 hours equals 9,000 seconds (2.5 × 60 x 60).
We can now determine how much energy the lightbulb produces:
= 200 W x 9,000 seconds.
= 1,800,000 J
Learn more about energy here: brainly.com/question/2003548
#SPJ4
the counting error of n = 1,107 counts is approximately (answer must be an integer):
The counting error of n = 1,107 counts can be estimated by the square root of n, which is the standard deviation of a Poisson distribution. The standard deviation for n = 1,107 is approximately 33.
So, the counting error of n = 1,107 counts can be estimated as approximately ±33 counts. This means that the true count could be anywhere between 1,074 and 1,140 counts with about 68% confidence, assuming a Poisson distribution. It's important to note that this estimate assumes a Poisson distribution, and the actual counting error may be different depending on the measurement process and other factors. In practice, it's often necessary to perform additional analysis and calibration to more accurately estimate counting errors.
To know more about error please refer:
https://brainly.com/question/13286220
#SPJ4
why do astronomers use the word dark when referring to dark energy and dark matter?
The astronomers use the work dark in dark matter as it does not appear to interact with the electromagnetic field, which means it does not absorb, reflect, or emit electromagnetic radiation and is, therefore, difficult to detect.
Unseen matter is referred to as dark matter. Because of the impact it has on items that we can directly view, we are aware that dark matter exists.
Dark matter slows down the expansion of the universe, while dark energy speeds it up. Dark matter works like an attractive force, a kind of cosmic cement that holds our universe together.
So, the term dark is used in both dark energy and dark matter.
To know more about energy:
https://brainly.com/question/29437303
#SPJ4
jane is using a 14 cm long screwdriver to assemble a bookcase. she applied a force of 45 n to rotate the screw 180 degrees. how much work did she do?
The amount of work done by Jane in applying the force and rotating through certain angle is calculated to be -6.3 J.
The force applied on the screw is given as 45 N.
The angle through which screw is rotated is given as 180°.
The length of the screw driver is given as 14 cm = 0.14 m.
The expression for work is given as,
W = F s cosθ
where, W is the work done
F is the force
s is the displacement
θ is the angle of rotation
Putting the values in the above equation, we have,
W = F s cosθ = 45 × 0.14 × cos180 = 45 × 0.14 × (-1) = -6.3 J
When the displacement occurs in the direction opposite to the force applied, negative work is done.
Thus, the work done is -6.3 J.
To know more about work:
https://brainly.com/question/30285325
#SPJ4
does cloud spins faster due to conservation of angular momentum. or gravitational potential energy is converted to kinetic energy ?
Cloud spins faster due to conservation of angular momentum and not due to the conversion of gravitational potential energy is to kinetic energy.
Conservation of angular momentum states that the total angular momentum of a closed system remains constant over time, so as the cloud spins faster, the angular momentum must remain the same, meaning that the angular velocity must increase. On the other hand, gravitational potential energy is converted to kinetic energy. Gravitational potential energy is energy stored in an object due to its position in a gravitational field, and this energy is converted to kinetic energy as the object moves.
To know more about angular momentum please refer:
https://brainly.com/question/29897173
#SPJ4
two divers jump from a 3.00-m platform. one jumps upward at ch 1.80 m/s, and the second steps off the platform as the first passes it on the way down. (a) what are their speeds as they hit the water? (b) which hits the water first and by how much?
(a) The first diver enters the water at 1.80 m/s, whereas the second diver enters the water at 0 m/s.
(b) The first diver hits the water first by 3.00 m.
What speed do they have when they enter the water?
The steps for this process are as follows
1. The first diver jumps upward at an initial speed of 1.80 m/s.
2. The second diver steps off the platform at the same time as the first diver passes it on the way down.
3. The first diver experiences acceleration due to gravity and its velocity decreases as it falls.
4. The second diver has no initial velocity, so its velocity remains zero as it falls.
5. The first diver and second diver both reach the water at the same time, with the first diver having a velocity of 1.80 m/s and the second diver having a velocity of 0 m/s.
Which and by how much hits the water first?
The steps for this process are as follows
1. The first diver has an initial speed of 1.80 m/s, and the second diver has no initial speed.
2. The first diver accelerates due to gravity and falls faster than the second diver.
3. The first diver will reach the water 3.00 m before the second diver due to its initial speed.
To learn more about initial speed refer :
https://brainly.com/question/26046491
#SPJ4
which of the arrows in the energy-level diagram represent absorption of energy and which represent emission of energy? items (6 items) (drag and drop into the appropriate area below)
The arrow pointing downwards ↓ represents emission of energy from higher excited state to lower excited state whereas the arrow pointing upwards ↑ represents the absorption of energy from lower excited state to higher excited state.
In a process known as absorption, an atom takes on energy from its surroundings to move from its ground state to its excited state. After taking in the energy, the electron ascends to a higher energy level.
Conservation of momentum can be applied here because the electron only takes in energy when it is exactly in line with its energy gap. Because photons and electrons have wavelengths that are nearly identical, you can say that electrons absorb energy.
When electrons regain their energy levels, they emit. When electrons absorb energy, they move to higher energy levels. By revealing the number of energy levels and the space between them, light absorption and emission reveal details about an atom's atomic structure.
To learn about energy
https://brainly.com/question/1932868
#SPJ4
3 parts....challenging......
-Mitchell is making a diagram that compares balanced and unbalanced forces. Which of these characteristics would most likely describe unbalanced forces in Mitchell's diagram?
A. They cause an object to move.
B. They create a net force of 0 Newtons.
C. They result when no forces are acting on the object.
D. They result when equal and opposite forces act on an object.
Kyson enjoys doing many hobbies. If Kyson is experiencing a balanced force on his body doing one such hobby, which of these activities might he be doing?
A. walking his dog
B. running in a race
C. sitting and reading
D. swimming laps in a pool
A student is writing a short essay about forces for her science class. Which of the following statements can she use to describe the characteristics of all types of forces?
A. Forces act in pairs.
B. Forces only pull objects together.
C. Only one force can act on an object at a time.
D. Forces cause objects to move faster, but not slower.
In Mitchell's diagram, unbalanced forces cause an object to move.
Kyson is sitting and reading. The characteristics of all types of forces is: Forces act in pairs.
What is force?The definition of force in physics is: The push or pull on a massed object changes its velocity. An external force is an agent that has the power to alter the resting or moving condition of a body. It has a direction and a magnitude.
A spring balance can be used to calculate the Force. The Newton is the SI unit of force.
For balanced force net force is zero and unbalanced force causes motion.
Learn more about force here:
https://brainly.com/question/13191643
#SPJ1
at what latitude is the sun directly overhead on april 22
The latitude where the sun is directly overhead on April 22nd is called the subsolar point.
The sun is directly overhead at the equator on the spring and autumn equinoxes, which occur around March 20th and September 22nd respectively. On April 22nd, the sun is not directly overhead at the equator, but it is overhead at a latitude in the tropics, close to the equator.
To be more precise, the latitude where the sun is directly overhead on April 22nd is called the subsolar point, and it changes slightly from year to year due to the elliptical shape of Earth's orbit around the sun. On average, the subsolar point on April 22nd is around Latitude 10° N. However, to get an exact value for a specific year, you would need to perform calculations based on the exact position of the Earth in its orbit.
To know more about precise please refer:
https://brainly.com/question/28336863
#SPJ4
Describe a a simple scheme for setting up any clay based enterprise in Nepal.
Explanation: Forest-Based Micro and Small Enterprises (FMSEs) are a major source of income for both rural and urban areas of most developing countries, and Nepal is no exception. Though not given enough priority compared to large-scale enterprises, FMSEs have contributed substantially to supporting the livelihoods of marginalized and low-income people by generating employment opportunities throughout the developing world. FMSEs provide employment to a large number of rural people in Nepal who have limited access to other off-farm employment opportunities, however, they are not growing well due to the ineffectiveness of enterprise promotion activities. Different enterprise promotion approaches are being implemented in Nepal by External Development Agencies (EDAs) in collaboration with local Community-Based Organizations (CBOs).In this review, we analyzed the effectiveness of existing FMSEs’ intervention approaches followed by EDAs, current status and constraints, and possible scopes of FMSEs in Nepal with reference to other developing countries. Five implementing approaches that are currently adopted by EDAs in Nepal have succeeded in the promotion of FMSEs to some extent. However, those approaches do still need to be improved in order to fully suit local contexts. In this respect, we suggest an Integrated FMSEs Development approach for Nepal and other developing countries coupled with some recommendations.
a train has a scheduled run of 140km between two cities in saskatchawan. the total trip takes 8.5 hours. if the average speed is decreased by 6km/h, what is the average speed of the train
The average speed of the train would be 10.5 km/h if the average speed is decreased by 6 km/h.
The average speed of a train can be calculated by dividing the total distance traveled by the total time taken. In this case, the train has a scheduled run of 140 km and the total trip takes 8.5 hours, so the average speed is:
Average speed = Total distance ÷ Total time = 140 km ÷ 8.5 hours = 16.5 km/h
If the average speed is decreased by 6 km/h, the new average speed of the train would be:
New average speed = Average speed - Decrease in average speed = 16.5 km/h - 6 km/h = 10.5 km/h
Therefore, average speed is 10.5 km/h
Learn more about average speed here:
https://brainly.com/question/9834403
#SPJ4
a roller coaster car of mass 250kg is atop a hill that has a height of 30m. the cart, starting from rest, proceeds down the hill and then up an adjacent hill that has a height of 10m. at the top of the second hill, the cart has a velocity of 17m/s. determine the work done by friction.
The work done by friction can be calculated using the equation W = F * d, where F is the force of friction and d is the distance traveled. In this case, the distance traveled is 30m (the height of the first hill) + 10m (the height of the second hill).
The force of friction can be calculated using the formula F = µmg, where µ is the coefficient of friction and m is the mass of the roller coaster car (250kg).
Assuming the coefficient of friction is 0.2, the force of friction would be 50N. Therefore, the work done by friction would be W = 50N * 40m = 2000J.
Learn more about force of friction :
https://brainly.com/question/4618599
#SPJ4
A spherical shell of radius 5.6 m is placed
in a uniform electric field with magnitude
1070 N/C.
Find the total electric flux through the
shell.
Answer in units of N m²/C. Answer in
units of N. m²/C.
Answer:
The total electric flux thru the shell is zero.
If you represent the electric field by vectors, for each vector entering the shell a corresponding vector will leave the shell for a net input of zero within the shell.
how many amperes will a 28-volt generator be required to supply to a circuit containing five lamps in parallel, three of which have a resistance of 6 ohms each and two of which have a resistance of 5 ohms each?
The current required to supply to the circuit containing five lamps in parallel is 25.2 amperes. The result is obtained by using the equation in parallel electrical circuit and Ohm's law.
What is parallel electrical circuit?A parallel electrical circuit is an electrical circuit where all the components are connected in rows or stacked.
In parallel circuit, the resistance, voltage, and current can be determined as
1/Rp = 1/R₁ + 1/R₂ + 1/R₃ + ....
V = V₁ = V₂ = V₃ = ...
I = I₁ + I₂ + I₃ = .....
A generator has
Supply voltage, V = 28 voltsFive lamps in parallel, R₁ = R₂ = R₃ = 6 ohms and R₄ = R₅ = 5 ohmsFind the current required!
We count the total resistance.
Since the five lamps are in parallel circuit, the total resistance is
1/Rp = 1/R₁ + 1/R₂ + 1/R₃ + 1/R₄ + 1/R₅
1/Rp = 1/6 + 1/6 + 1/6 + 1/5 + 1/5
1/Rp = 3/6 + 2/5
1/Rp = 1/2 + 2/5
1/Rp = 5/10 + 4/10
1/Rp = 9/10
Rp = 10/9 ohms
Using the Ohm's law, we get the current required.
I = V/R
I = 28 volts / (10/9) ohms
I = 28 × 9/10
I = 25.2 amperes
Hence, to supply to the parallel circuit containing five lamps, the generator requires a current of 25.2 amperes.
Learn more about parallel electrical circuit here:
brainly.com/question/30398629
#SPJ4
which of the following statements is true? question 1 options: a) uv light has higher energy than x-ray radiation. b) the higher the frequency of a wave, the lower its energy. c) uv light has higher energy and higher frequency than visible light. d) uv light has longer wavelength and higher energy than visible light.
Answer:
c) UV light has higher energy and higher frequency than visible light.
Explanation:
The statement "c) UV light has higher energy and higher frequency than visible light" is true because UV light is a type of electromagnetic radiation with a higher frequency than visible light. The frequency of a wave is a measure of how many oscillations or cycles it completes in one second and is typically measured in hertz (Hz). The higher the frequency, the more energy it contains. UV light has a higher frequency than visible light, which means it has more energy. Additionally, ultraviolet radiation is also considered to have higher energy than visible light as well.
what is the spontaneous direction of change? 1. toward product formation 2. in equilibrium 3. unable to determine 4. toward reactant formation
The spontaneous direction of change in equilibrium. This indicates that, in the absence of any external influence, a reaction will proceed in the direction that leads to the formation of products rather than reactants.
The natural flow of change is toward product formation. The reaction will continue until it achieves a condition of chemical equilibrium when the rate of product formation equals the rate of reactant formation. The spontaneous direction of change is balanced in both directions at chemical equilibrium, which means that the rate of the forward reaction equals the rate of the reverse reaction. The concentrations of reactants and products remain constant, and the system undergoes no net change. In other words, the system is in a condition of dynamic balance, with forward and reverse responses occurring at equal rates all the time.
To know more about the equilibrium, click here: brainly.com/question/28527601
#SPJ4
what is the magnitude of the buoyant force fb on the balloon?
The buoyant force an object experiences when floating is proportional to its weight. The weight w, liquid of the displaced liquid has the same magnitude as the buoyant force.
The formula for buoyant force is (B) = ρVg, where g = 9.8 (gravity), V = Displaced Volume, and = Density of Fluid (we used air density because the balloons were afloat, not submerged). Thus, buoyant force is directly influenced by the volume of the fluid displaced, the fluid's density, and the acceleration caused by gravity at the location. As is common knowledge, buoyant force equals the weight of the fluid displaced by the body part submerged in it.
To learn more about buoyant force click here https://brainly.com/question/20165763
#SPJ4
