You retain balance when the weight and the reaction forces are balanced.
What chronological events helps a person to keep balance?Your question is incomplete but I think you want to know how a person can retain balance.
We know that we can only be keep balance when the forces that are acting on the person is balanced. The implication of it is that there are no unbalanced forces that are acting on the person.
The two forces that act on you when you stand are the weight and the reaction force. If these two forces are balanced then you can be able to retain your balance.
Learn more about force balance:https://brainly.com/question/29769471
#SPJ1
How many moles of glucose did your body consume if you exhale 100 grams of carbon dioxide?
C6H12O6 + 6O2 = 6CO2 + 6H2O
24 g of pure CO2 are exhaled by the individual. To calculate the number of moles, divide the outcome by the molar mass. As a result, the individual exhales about 0.55 moles of carbon dioxide every hour.
What impact on glucose molecule due to exhale of Co2?During aerobic cellular respiration, the interaction of glucose and oxygen results in the production of ATP that the cell can utilize.
As by-products, water and carbon dioxide are produced. The general formula for aerobic cellular respiration is: During cellular respiration, oxygen and glucose combine to create ATP.
CO2 is converted to glucose during photosynthesis, and H2O is oxidized to produce oxygen. Cellular respiration involves the reduction of oxygen and the oxidation of glucose to produce CO2 and water.
CO2 is carried by the bloodstream to the lungs, where it is eventually exhaled out of the body.
Therefore, Hence Number of moles glucose, C6H12O6 = 100g/180g = 0.55 moles.
Learn more about glucose here:
https://brainly.com/question/8394646
#SPJ1
The smallest part of an element that retains the chemical properties of the element. A electron B molecule C atom D proton
The smallest part of an element that retains the chemical properties of the element is the atom.
An atom is the basic unit of matter, composed of protons, neutrons, and electrons. Each atom has a specific number of protons, which determines the element it represents. Atoms are incredibly small, with a diameter of about 10^-10 meters. However, they are crucial to understanding the behavior of matter.
The properties of atoms determine the physical and chemical properties of the materials they compose. For example, carbon atoms are a fundamental building block of organic molecules, which are essential to life. Oxygen atoms are necessary for respiration and the combustion of fuels. Understanding the structure of atoms and their interactions is essential to fields like chemistry, physics, and materials science.
Scientists have developed models to represent the behavior of atoms, such as the Bohr model and the quantum mechanical model. These models help us understand how atoms bond and react with each other, which is vital for developing new materials, drugs, and technologies. Overall, atoms are the building blocks of matter and play a critical role in shaping the world around us.
Learn more about atom
brainly.com/question/24053594
#SPJ4
When a lab instructor checked the stockroom, he found 60.0 grams of sodium hydroxide left in the container. What volume (in mL) can he make of a 0.25 M solution?
to find percent by volume: [tex]\frac{volume of solute (mL)}{volume of solution (mL)}[/tex] X 100
to find Molarity: [tex]\frac{moles}{liters}[/tex]
Therefore, the lab instructor can make 6000 mL (or 6.00 L) of a 0.25 M solution from 60.0 grams of sodium hydroxide.
what is sodium hydroxide ?
Sodium hydroxide (NaOH) is a highly caustic and reactive compound that is also known as lye or caustic soda. It is an inorganic base that is typically produced through the electrolysis of a sodium chloride (salt) solution.
Sodium hydroxide is commonly used in many industrial processes
To find the volume (in mL) of a 0.25 M solution that can be made from 60.0 grams of sodium hydroxide, we can use the following formula:
moles of solute = Molarity x volume (in liters)
First, we need to calculate the number of moles of sodium hydroxide present in 60.0 grams:
moles of NaOH = mass / molar mass
moles of NaOH = 60.0 g / 40.00 g/mol (molar mass of NaOH)
moles of NaOH = 1.50 mol
Next, we can rearrange the formula to solve for the volume (in liters) of the solution:
volume = moles of solute / Molarity
volume = 1.50 mol / 0.25 M
volume = 6.00 L
Finally, we can convert the volume to milliliters:
volume (in mL) = 6.00 L x 1000 mL/L
volume (in mL) = 6000 mL
Therefore, the lab instructor can make 6000 mL (or 6.00 L) of a 0.25 M solution from 60.0 grams of sodium hydroxide.
To find percent by volume, we need to know the volume of solute and the volume of solution. Percent by volume is calculated as:
percent by volume = (volume of solute / volume of solution) x 100
To find Molarity, we can use the formula:
Molarity = moles of solute / volume of solution (in liters)
To learn more about Molarity follow the given link: https://brainly.com/question/23243759
#SPJ1
All of the following pairs of ions are isoelectronic except which one?
A) Al³⁺ and N³⁻
B) Fe²⁺ and Co³⁺
C) Fe²⁺ and Mn³⁺
D) K+ and Ca²⁺
E) Zn²⁺ and Cu+
Except Fe²⁺ and Mn³⁺ remaining all pairs of ions are isoelectronic. These species are substances with the same arrangement of electrons (and therefore the same number of electrons).
When two ions or molecules share the same electronic structure and valence electron count, they are said to be isoelectronic. In Fe we see the total number of electrons are 26 electrons then Fe2+ loses two electrons after which it becomes 24 electrons while Mg has 12 electrons, the Mg3+ loses 3 electrons after which it contains 9 electrons. The electronic configuration of Fe2+ is [Ar] 3d6. The electronic configuration of Mg3+ is [Ne] 3s2. So, here we can observe they have different arrangement of electrons as to which they are not isoelectronic.
To learn more about isoelectronic click here https://brainly.com/question/6807313
#SPJ4
if you wanted to produce 4.30 grams of iron (iii) hydroxide, how many ml of 1.00 m fe(no3)3 would you need if you had excess sodium hydroxide?
If we wanted to produce 4.30 grams of iron (III) hydroxide, the ml of 1.00 M Fe(NO₃)₃ excess sodium hydroxide is 0.040 L.
The mass of the iron (III) hydroxide = 4.30 grams
The mass molar of iron (III) hydroxide = 106.87 g/mol
The moles of the iron (III) hydroxide = mass /molar mass
The moles of the iron (III) hydroxide = 4.30 / 106.87
The moles of the iron (III) hydroxide = 0.040 mol
The molarity = 1 M
The volume = moles / molarity
Volume = 0.040 / 1
Volume = 0.040 L
Thus, the volume of Fe(NO₃)₃ is 0.040 L.
To learn more moles here
https://brainly.com/question/29076435
#SPJ4
Mass Spectrometry and x-ray diffraction are common biochemical techniques for characterizing proteins. Classify each statement based on whether it applies to MS, X-Ray, or both.
Based on the mass-to-charge (m/z) ratio, mass spectrometry is a sensitive method for discovering, classifying, and quantifying compounds.MS was first employed in the biological sciences to track heavy isotopes through biological systems. It was developed nearly a century ago to identify elemental atomic weights.
What is the steps for classifying?STEP 1: The mass-to-charge ratio of ions is assessed in the analysis of proteins using mass spectrometry (MS) in order to recognise and quantify molecules in simple and complicated mixtures.
Proteomics is one of the many areas and applications where MS has shown to be useful.
In the last two decades, high throughput and quantitative MS proteomics techniques have advanced our understanding of protein structure, function, modification, and overall protein dynamics.
In this overview, the function of mass spectrometry in proteomics, as well as MS methodology and equipment, sample preparation, and liquid chromatography-based separation.
STEP 2: A beam of incoming X-rays is used in X-ray crystallography (XRC), an experimental science, to determine a crystal's atomic and molecular structure by causing it to diffract in a variety of directions due to its crystalline structure.
An image of the density of electrons within the crystal can be created in three dimensions by measuring the angles and intensities of these diffracted beams.
The average positions of the atoms in the crystal, their chemical bonds, the degree of crystallographic disorder, and other data may all be determined using this electron density.
To know more about Mass spectrometry visit:
https://brainly.com/question/26500669
#SPJ1
0.99 mol of aluminum sulfide and 0.55 mol of water react until the limiting reagent is used up:
Al2S3 + 6H2O 2Al(OH)3 + 3H2S
1. Which is the limiting reagent?
2. What is the maximum mass of hydrogen sulfide that can form?
3. How much excess reagent remains after the reaction is complete?
Taking into account definition of limiting reagent, H₂O will be the limiting reagent, 0.275 moles of H₂S can be produced if 0.99 mol of aluminum sulfide and 0.55 mol of water react and 0.898 moles of the excess reagent remains after the reaction is complete.
Reaction stoichiometryIn first place, the balanced reaction is:
Al₂S₃ + 6 H₂O → 2 Al(OH)₃ + 3 H₂S
By reaction stoichiometry (that is, the relationship between the amount of reagents and products in a chemical reaction), the following amounts of moles of each compound participate in the reaction:
Al₂S₃: 1 moleH₂O: 6 molesAl(OH)₃: 2 molesH₂S: 3 molesLimiting reagent and excess reagentThe limiting reagent will be the one that is used up first in the reaction while the excess reagent will be the one that is not completely used up during the reaction.
The amount of product obtained from the reaction will always depend on the amount of limiting reagent in the reaction.
Limiting reagent in this caseTo determine the limiting reagent, it is possible to use a simple rule of three as follows: if by stoichiometry 1 mole of Al₂S₃ reacts with 6 moles of H₂O, 0.99 mole of Al₂S₃ reacts with how many moles of H₂O?
moles of H₂O= (0.99 mole of Al₂S₃× 6 moles of H₂O)÷ 1 mole of Al₂S₃
moles of H₂O= 5.94 moles
But 5.94 moles of H₂O are not available, 0.55 moles are available. Since you have less moles than you need to react with 0.99 mole of Al₂S₃, H₂O will be the limiting reagent.
Amount of excess reagentTo calculate the amount of excess reagent that remains after the reaction is complete, you can use a simple rule of three as follows: if by stoichiometry 6 moles of H₂O reacts with 1 mole of Al₂S₃, 0.55 moles of H₂O reacts with how many moles of Al₂S₃?
moles of Al₂S₃= (1 mole of Al₂S₃× 0.55 moles of H₂O)÷ 6 moles of H₂O
moles of Al₂S₃= 0.092 moles
If 0.99 moles of Al₂S₃ are avilable, the excess moles can be calculated as:
excess moles of Al₂S₃= 0.99 moles - 0.092 moles
excess moles of Al₂S₃= 0.898 moles
0.898 moles of the excess reagent remains after the reaction is complete.
Mass of H₂S formedConsidering the limiting reagent, the following rule of three can be applied: if by reaction stoichiometry 6 moles of H₂O form 3 moles of H₂S, 0.55 moles of H₂O form how many moles of H₂S?
moles of H₂S= (0.55 moles of H₂O×3 moles of H₂S)÷6 moles of H₂O
moles of H₂S= 0.275 moles
Finally, 0.275 moles of H₂S can be produced.
Learn more about limiting reagent:
brainly.com/question/24945784
#SPJ1
What is the estimated density of the table tennis ball? Record your answer to the nearest hundredth. G/cm3 What is the estimated density of the golf ball? Record your answer to the nearest hundreth. G/cm3
Answer:
The estimated density of a table tennis ball is around 2.7 g/cm^3. The estimated density of a golf ball is around 1.5 g/cm^3.
Explanation:
the chemicals that travel from one neuron to another, enabling signaling across synapses, are called
The chemicals that travel from one neuron to another, enabling signaling across synapses, are called neurotransmitters.
What are neurotransmitters ?Neurotransmitters are chemical messengers that allow communication between neurons in the nervous system. They are released from the axon terminals of a presynaptic neuron into the synaptic cleft, where they bind to receptors on the postsynaptic neuron, leading to changes in the postsynaptic cell's electrical and/or biochemical state.
Neurotransmitters play a crucial role in a wide range of brain functions, including mood regulation, learning and memory, motor control, and sensory processing.
Some examples of neurotransmitters include dopamine, serotonin, norepinephrine, acetylcholine, and GABA. Imbalances in neurotransmitter levels or functioning are implicated in various neurological and psychiatric disorders, including depression, anxiety, schizophrenia, and Parkinson's disease.
To know more about synapses, visit:
https://brainly.com/question/27381250
#SPJ1
Transcribed image text: Select the keyword or phrase that will best complete each sentence. Select the keyword or phrase that will best complete each sentence. A tetrahedral carbon is____hybridized while a linear carbon is_____hybridized. Two different compounds that have the same molecular formula are known as_______. Pi (pi) bonds are generally____than sigma (sigma) bonds. Hybridization is the combination of two or more______orbitals to form the same number of____orbitals, each having the same shape and energy. A_____bond is formed by side-by-side overlap of two p orbitals. The____is a measure of an atom's attraction for electrons in a bond and indicates how much a particular atom ''wants" electrons. Two Lewis structures that have the same atomic placement and a structure but a different arrangement of pi electrons are called_____. All single bonds are_____bonds.
The answer for the blanks are: sp3, sp, isomers, weaker, atomic, hybrid, pi, electronegativity, resonance structures, sigma (in the sequence of the blanks)
A tetrahedral carbon is sp3 hybridized while a linear carbon is sp hybridized. Two different compounds that have the same molecular formula are known as isomers. Pi (pi) bonds are generally weaker than sigma (sigma) bonds. Hybridization is the combination of two or more atomic orbitals to form the same number of hybrid orbitals, each having the same shape and energy. A pi bond is formed by side-by-side overlap of two p orbitals. The electronegativity is a measure of an atom's attraction for electrons in a bond and indicates how much a particular atom ''wants" electrons. Two Lewis structures that have the same atomic placement and a structure but a different arrangement of pi electrons are called resonance structures. All single bonds are sigma bonds.
Learn more about hybridization in carbon compounds here:
brainly.com/question/30461122
#SPJ4
We have a container of unknown size. It’s pressure is at 30 atm, with 1.5 moles at 2000k. what is the volume of this container?
A. 2.1 L
B. 8.2 L
C. 16.4 L
D. 4.1 L
The volume of the container that has a pressure of 30 atm, with 1.5 moles at 2000K is 8.2L (option B).
How to calculate volume?The volume of a gas can be calculated using the Avogadro's law equation as follows:
PV = nRT
Where;
P = pressureV = volumen = no of molesR = gas law constantT = temperatureAccording to this question, a container has a pressure at 30 atm, with 1.5 moles at 2000K. The volume is calculated thus;
30 × V = 1.5 × 0.0821 × 2000
30V = 246.3
V = 246.3 ÷ 30 = 8.21L
Therefore, option B is the answer.
Learn more about volume at: https://brainly.com/question/24189159
#SPJ1
I need help with these questions Lewis Diagrams
The diagrams known as Lewis structures, often referred to as Lewis dot formulas, depict the interactions between the atoms in a molecule as well as any lone pairs of electrons that may be present.
Structure Lewis structures are diagrams that show the valence electrons of atoms within a molecule. They are also referred to as Lewis dot structures or electron dot structures. The valence electrons of atoms and molecules, whether they reside as lone pairs or within bonds, can be seen using these Lewis symbols and structures.A single bond is defined as one shared pair of electrons. Eight valence electrons engage with each Cl atom: six are in lone pairs and two are in a single bond.For more information on Lewis structure kindly visit to
https://brainly.com/question/20300458
#SPJ1
which answer best describes why does ice float in liquid water?
A liquid is made up of small vibrating matter particles called atoms. Ice float in liquid water is best described by the term density.
What is liquid?A liquid is a virtually incompressible fluid that adapts to the geometry of its container while maintaining a (near) constant volume regardless of pressure. As such, it is among the four fundamental matter states (the others being solid, gas, and plasma) and the only one having a set volume but no fixed form.
A liquid is made up of small vibrating matter particles called atoms that are bound together by intermolecular connections. Ice float in liquid water is best described by the term density.
Therefore, ice float in liquid water is best described by the term density.
To know more about liquid, here:
https://brainly.com/question/28815186
#SPJ1
Select the gas with the highest average kinetic energy per mole at 298 K. a. carbon dioxide. b. all have the same kinetic energy. c. hydrogen. d. water.
The average kinetic energy of gas particles is proportional to the absolute temperature of the gas, and all gases have the same average kinetic energy at the same temperature.
The temperature of a substance is defined as the average kinetic energy of all of its atoms or molecules. A substance's particles do not all have the same kinetic energy.
The average kinetic energy of the particles in a substance is measured by temperature. It is a typical particle's kinetic energy. Thermal equilibrium occurs when two substances have the same temperature.
The average kinetic energy of gas particles is proportional to the absolute temperature of the gas, and all gases have the same average kinetic energy at the same temperature.
To know more about Average kinetic energy go through:-
https://brainly.com/question/492249
#SPJ4
The following data were obtained when the method of the Kinetics experiment was applied to a different reaction. Determine the order of the reaction with respect to reactant, A.
Briefly explain your answer.
Graphs Correlation coefficient (R 2 )
[A]t versus t 0.9978
ln[A]t versus t 0.9925
1/[A]t versus t 0.9813
[A]t versus t gives first order reaction, ln[A]t versus t gives second order reaction and 1/[A]t versus t gives third order reaction.
What is order of the reaction?The order of reaction has been defined as the rate's power dependency on reactant concentration. That once rate law of something like a reaction has been identified, the same rule may be utilized to fully comprehend the content of the reaction mixture.
In plenty of other words, this reaction order is indeed the exponent through which the concentration of a given species is increased, and it indicates how the concentrations of the species impacts the rate of reaction.
[A]t versus t gives first order reaction
ln[A]t versus t gives second order reaction
1/[A]t versus t gives third order reaction
Therefore, [A]t versus t gives first order reaction, ln[A]t versus t gives second order reaction and 1/[A]t versus t gives third order reaction.
To learn more about order of the reaction, here:
https://brainly.com/question/1769080
#SPJ9
what is the correct name for the compound with the formula nh4no2?
The name for the compound with the formula NH4NO2 is ammonium nitrite.
This is an inorganic compound that is made up of ammonium cation (NH4+) and nitrite anion (NO2-). It is a white crystalline solid that is highly soluble in water and decomposes at temperatures above 60°C. Ammonium nitrite is used in various industrial processes, including in the production of dyes, pharmaceuticals, and explosives. It is also used as a reagent in organic chemistry reactions. While ammonium nitrite is not considered as a highly dangerous compound, it can decompose into toxic nitrogen oxides when heated, so appropriate safety precautions must be taken when handling it.Ammonium nitrite (NH4NO2) is a colorless, crystalline solid compound that is soluble in water. It is an unstable compound that is used in the production of nitrogen gas and as a reagent in organic chemistry. When heated, ammonium nitrite decomposes into nitrogen gas and water, making it a potential source of nitrogen gas for various industrial and chemical processes. However, ammonium nitrite is a hazardous and unstable compound that can undergo explosive decomposition when subjected to heat, shock, or friction, making it dangerous to handle and store. As a result, it is heavily regulated and restricted for use in many countries.
Learn more about ammonium nitrite here:
https://brainly.com/question/1111916
#SPJ4
The ratio is very close to 1 C to 2 H.
What is the empirical formula?
A. C₂H
B. CH₂
C. C₂H₂
The ratio is very close to 1 C to 2 H. Then the empirical formula is CH₂. Therefore, option B is correct.
What is an empirical formula ?An Empirical formula is the chemical formula of a compound that gives the proportions (ratios) of the elements present in the compound but not the actual numbers or arrangement of atoms. This would be the lowest whole number ratio of the elements in the compound.
To find the ratio or the moles of each element by dividing the number of moles of each by the smallest number of moles.
In CH₂ there are one carbon and two hydrogen atoms are present. Hence, CH₂ is an empirical formula.
Thus, option B is correct.
To learn more about an empirical formula, follow the link;
https://brainly.com/question/11588623
#SPJ1
Cice = 2.10 J/g·°C, Cwater = 4.18 J/g·°C,
Csteam = 2.08 J/g·°C, ∆Hfus = 6.01 kJ/mol,
∆Hvap = 40.68 kJ/mol.
Find the value for q when 15.0 g water freezes.
The heat absorbed when 15.0 g of water freezes is 5.01 kJ.
What is heat absorbed ?
Chemical reaction or physical change is endothermic if heat is absorbed by the system from the surroundings.
The heat absorbed or released during a phase change can be calculated using the equation q = mL,
where
m is the mass of the substance undergoing the change L is its heat of fusion or vaporization.For the case of 15.0 g of water freezing, the heat absorbed can be calculated as follows:
q = mL
q = (15.0 g) * (6.01 kJ/mol) / (18.015 g/mol)
q = 5.01 kJ
Therefore, the heat absorbed when 15.0 g of water freezes is 5.01 kJ.
Learn more about heat absorbed here : brainly.com/question/30361927
#SPJ1
What happens during an earthquake?
A. Seismic waves carry energy away from the original point of movement.
B. Potential energy builds up in the rock on both sides of a fault.
C. Tectonic plates move when seismic waves carry energy to their boundaries.
D. Pressure builds up between tectonic plates as they move against each other.
Please hurry, and no spamming!
Answer: A. Seismic waves carry energy away from the original point of movement
Explanation: When an earthquake occurs, it is caused by the sudden release of energy in the Earth's crust, usually due to the movement of tectonic plates. This energy travels through the Earth in the form of seismic waves. These waves radiate outwards from the epicenter, which is the point on the Earth's surface directly above the focus, where the earthquake originates. The seismic waves carry the energy released during the earthquake away from the original point of movement. These waves can cause the ground to shake and can be detected by seismographs.
Learn more about earthquakes here: https://brainly.com/question/27054453.
explain briefly the consequences of including 1,1,4,4-tetraminobutane in the polymerization with an exact stoichiometric ratio of 2:1:4 of 1,4-diaminobutane to 1,1,4,4-tetraminobutane to sebacoyl chloride.
Tetraminobutane (1,1,4,4) has four amino groups and is a kind of diamine that can be combined with other diamines, diacids, or diacyl chlorides to create polyamides.
Tetraminobutane (1,1,4,4) has the chemical formula C6H16N4 and is a diamine compound. Because it is a highly branched chemical with four amino groups at the ends of each branch, it can be used in polymer chemistry cross-linking and branching reactions. In the synthesis of polyamides, which are high-performance polymers with several uses in the textile, automotive, and aerospace sectors, TMB is frequently utilised as a co-monomer. TMB is a special building block for the design and synthesis of new polymeric materials with specialised properties and functionality thanks to its high reactivity, branching potential, and cross-linking capability.
Learn more about Tetraminobutane (1,1,4,4) here:
https://brainly.com/question/29723599
#SPJ4
The rays that damage the skin are call?
Answer:
ultraviolet, or UV rays from the sun can damage yor skin. thats why you put on sunscreen lol
75 m is equivalent to a. 75 moles per liter. b. 7.5 moles per liter. c. 750 moles per liter. d. 75 moles per milliliter. e. 7.5 moles per milliliter.
None of the aforementioned choices are appropriate since moles per litre (mol/L) and moles per millilitre (mol/mL) are measures of concentration while metres (m) is a unit of length or distance.
The unit of concentration known as moles per litre (mol/L or M) is frequently used in chemistry. It expresses the quantity of a substance in moles that has dissolved in a litre of solution. The concentration of chemical solutions, including acids, bases, salts, and organic molecules, is frequently described using this unit. Because it offers a means of standardising a solution's concentration, the idea of moles per litre is crucial for enabling precise and repeatable measurements of reactants and products in chemical processes. By dividing the number of moles of solute by the volume of the solution in litres, one can determine the molar concentration of a solution.
Learn more about moles per litre here:
https://brainly.com/question/30169960
#SPJ4
what is the gas (pressure) that is being released during venting? why does the gas form and why is it less prominent as mixing is continued? 43a
Since many organic solvents are volatile, vapors will accumulate during mixing and raise the container's internal pressure. In order to release this pressure, it is necessary to frequently vent the mixing container.
As gas particles collide with the wall of their container, a force known as "gas pressure" is generated. Force is used to apply pressure to a region. Gas pressure is the force a gas applies to a certain location. As a result, the gas pressure of a gas is calculated by dividing the total surface area of the container walls by the sum of the forces the gas molecules exert on the walls of their container.
Learn more about organic solvents here:
https://brainly.com/question/28850026
#SPJ4
e-85 is an alternative fuel for automobiles and light trucks that consists of 85.0% (by volume) ethanol (c2h5oh), and 15.0% gasoline. when ethanol burns completely it produces co2 and h2o. the balanced equation for the burning of ethanol is
When ethanol burns completely it produces CO2 and H2O, 993.2 moles of CO2 are used.
Given that,
E-85 is an alternative fuel for automobiles and high trucks consisting of 85.0% Ethanol =15.0% gasoline.
C2H5OH+3O2----> 2CO2+3H2O
The density of ethanol = 0.790 g/mL
1 gallon = 3.785 L
therefore, 9 gallons = 9*3.785
=34.07 L
Volume of ethanol in 9 gallons=85% of 34.07 L.
=85/100*34.07
=28.96 L
Mass of ethanol = Volume * Density
=28.96 L*0.790 g/mL
=22878.49 g
Moles of ethanol= Mass/ molar mass
=22848.49/46.07 g/mol
=496.6 moles
Thus, the moles of CO2 produced = 2*496.6 = 993.2 moles of CO2.
To learn more about density check the link below:
https://brainly.com/question/1354972
#SPJ4
Write the rate law expected for this mechanism. What is the overall balanced equation for the reaction? What are the intermediates in the proposed mechanism?
Answer:
The rate law for the overall reaction is given by the rate-determining step, which is the slowest step in the mechanism. In this case, the slowest step is the first step, where C4H9Br is converted to C4H9+ and Br-. Hence, the rate law for the overall reaction can be expressed as:
Rate = k[C4H9Br]
where k is the rate constant for the first step.
The overall balanced equation for the reaction is:
C4H9Br + H2O --> C4H9OH + HBr
The intermediates in the proposed mechanism are C4H9+ and C4H9OH2.
What volume of a 2.46 M
magnesium nitrate (Mg(NO3)2)
solution would be needed to make
275 mL of a 0.758 M solution by
dilution?
[?] mL of 2.46 M Mg(NO3)2
Converting the volumes to litres is not necessary. Any volume measurement is acceptable as long as it is utilized consistently on both sides.
What is the needed volume to make dilutions?The following formula can be used to create a specific volume of a diluted solution from a stock solution. Where: V1 = Volume of stock solution required to make the new solution, C1V1 = C2V2. C1 is the stock solution's concentration. V2 is the new solution's final volume.
However, as was already said, you need to know the volume in litres if you're trying to figure out how many moles of solute are present.
Data retrieved from the query include the following:
C1 = 2.46 M
V1 =?
C2 = 0.758 M
V2 = 275 mL = 275/1000 = 0.275L
We can definitely determine the volume of the initial solution using the dilution formula C1V1 = C2V2.
C1V1 = C2V2
2.46 x V1 = 0.758 x 0.275
Divide both side by 2.46
V1 = (0.758 x 0.275) /2.46
V1 = 0.0847L
Therefore, 0.0847L volume of a 2.46 Magnesium nitrate (Mg(NO3)2)
solution would be needed to make 275 mL of a 0.758 M solution by
dilution
Learn more about dilutions here:
https://brainly.com/question/28997625
#SPJ1
when the bromothymol blue solution turned from blue to yellow what did that tell us about the ph of the solution?
Because the pH of amniotic fluid is usually > 7.2, bromothymol turns blue when it comes into contact with the fluid leaking from the amniotic membrane. The pH of the vagina is usually acidic, so blue indicates the presence of amniotic fluid.
Bromothymol blue is a pH indicator. It is mainly used in applications where substances with a relatively neutral pH (approximately 7) must be measured. It is commonly used to measure the presence of carbonic acid in a liquid. It is usually sold in solid form as the sodium salt of an acid indicator.
Bromothymol blue can be used to monitor photosynthetic activity or as an indicator of respiration (turns yellow when CO2 is added). A common demonstration of the properties of the BTB pH indicator involves exhaling into a neutral BTB solution through a tube. The solution changes color from green to yellow as CO2 is absorbed into the solution by breathing to form carbonic acid. Therefore, the BTB is commonly used in science classes to prove that the more muscles involved, the higher the CO2 emission.
It can also be used in laboratories as a dye for biological preparations. At this point the bromothymol is already blue and uses a few drops of BTB on the waterslide. Mix the sample with the blue BTB solution and fix it on a glass slide with a coverslip. It is sometimes used to identify cell walls or nuclei under a microscope.
Bromothymol is used in obstetrics to detect premature rupture of the amnion. Since the pH of amniotic fluid is typically > 7.2, bromothymol turns blue when it comes in contact with amniotic fluid. The pH of the vagina is usually acidic, so blue indicates the presence of amniotic fluid. The test may be false positive in the presence of other alkaline substances such as blood or semen, or in the presence of bacterial vaginosis.
Learn more about amniotic membrane:
https://brainly.com/question/1177725
#SPJ4
Select the term that correctly describes a chemical reaction that favors one possible structural isomer over one or more other structural isomers.
A. Stereogeneic
B. Stereoselective
C. Regioselective
D. Regiogenic
A chemical reaction that prefers one potential structural isomer over one or more other structural isomers is accurately referred to as stereoselective.
One stereoisomer from a variety of stereoisomers interacts in a stereoselective reaction. Additionally, a reaction that, although it has the potential to yield two or more stereoisomers, only ever yields one stereoisomer.
The overall reaction is referred to as stereoselective if more than one reaction between a group of reactants may take place under the same circumstances, producing products that are stereoisomers, and if one product forms in larger proportions than the others.
Occasionally, the phrase "stereospecific" is used to denote "100% stereoselective" (cf. regiospecific). It is advised to avoid using the phrase stereospecific to signify 100% stereoselective because the term's original definition is different.
Learn more about Stereoselective here:
https://brainly.com/question/14610139
#SPJ4
A neutral atom is an atomic number of 15, what is the likely arrangement of electrons
There are 15 total electrons in an uncharged phosphorus atom. There are two electrons that can fit into the first shell, eight in the second, and five more in the third. There are 5 valence electrons in the third shell because it is the outer valence shell.
So, with the element PHOSPHORUS, you already know that the atomic number indicates how many electrons there are. Accordingly, an atom of phosphorus contains 15 electrons. Another way to respond to this query is by expressing the electron arrangement of a neutral phosphorus atom, which has 15 electrons: 1s22s22p63s23p3. A 15th atomic-number element will have the electrical configuration 2, 8, 5. The "k" shell has two electrons, the "l" shell has eight, and the "m" shell has five, respectively. Five valence electrons make up this atom.
Learn more about phosphorus atom here:
https://brainly.com/question/4622631
#SPJ4
5 a weight is added to a piston so that the volume of the gas inside the container is reduced from 2.5 l to 1.0 l at a constant temperature. how much heat do you need to add to the system if you want to increase the volume back to 2.5 l at this new pressure? assume a specific ideal gas (such as oxygen) and an initial pressure of 1.0 atm.
As the temperature remains constant and no heat is exchanged with the surroundings, the amount of heat required to increase the volume back to 2.5 L at 2.5 atm is zero.
Determination of the amount of heat required based on ideal gas lawTo solve this problem, we need to use the ideal gas law, which relates the pressure, volume, and temperature of a gas:
PV = nRT
where P is the pressure, V is the volume, n is the number of moles of gas, R is the ideal gas constant, and T is the temperature.
Assuming that the number of moles of gas and the temperature remains constant throughout the process, we can simplify the ideal gas law to:
P1V1 = P2V2
where P1 and V1 are the initial pressure and volume, and P2 and V2 are the final pressure and volume.
In this case, the initial pressure is given as 1.0 atm, the initial volume is 2.5 L, and the final volume is 1.0 L. We can use these values to find the final pressure:
P1V1 = P2V2
1.0 atm × 2.5 L = P2 × 1.0 L
P2 = 2.5 atm
Now we want to increase the volume back to 2.5 L at this new pressure of 2.5 atm. To do this, we need to add heat to the system. The amount of heat required can be calculated using the following formula:
Q = nCpΔT
where Q is the heat added, n is the number of moles of gas, Cp is the molar heat capacity of the gas at constant pressure, and ΔT is the change in temperature.
Assuming that the gas is oxygen (O2), which is a diatomic molecule, we can use the molar heat capacity at constant pressure for O2, which is Cp = 29.4 J/(mol·K).
We can also assume that the process is reversible and adiabatic, meaning that no heat is exchanged with the surroundings (Q = 0) and the temperature remains constant.
Using the ideal gas law, we can find the number of moles of gas in the system:
PV = nRT
1.0 atm × 2.5 L = n × 0.08206 L·atm/(mol·K) × T
T = 30.49 K
n = PV/RT = (2.5 atm × 2.5 L)/(0.08206 L·atm/(mol·K) × 30.49 K) = 2.536 mol
Now we can calculate the amount of heat required:
Q = nCpΔT = 2.536 mol × 29.4 J/(mol·K) × 0 K = 0 J
To know more about ideal gas law, visit:https://brainly.com/question/28257995
#SPJ4
