Here the stratigraphic courting between layers is referred to, i.e in the bull's eye circle, the center is younger consequently its miles syncline.
Stratigraphic relationships are the relationships created among contexts in time, representing the chronological order wherein they have been created. Soils in stratigraphy are crucial to archaeology because they suggest a massive duration of balance whilst a panorama surface becomes solid and does not present a process of large deposition or erosion.
Stratigraphy has 3 associated subfields:
lithostratigraphy (lithologic stratigraphy), biostratigraphy (biologic stratigraphy), chronostratigraphy (stratigraphy through age).Stratigraphy is that the class of different layers or layering of sedimentary deposits, and sedimentary or layered volcanic rocks. This subject is crucial to inform the geological history and bureaucracy as the basis for the classification of rocks into distinct units that may be without difficulty mapped.
Learn more about Stratigraphy here: https://brainly.com/question/6003612
#SPJ4
Select the correct answer. imagine that you are buying books one by one and then piling them up after reading them. which geologic concept could you use to identify the topmost book as the newest? a. principle of inclusion b. principle of lateral continuity c. law of superposition d. principle of unconformities
Using the principle of superposition, the topmost book in the pile would be identified as the newest. Therefore, option c is correct.
The principle of superposition is a fundamental concept in geology that states that in an undisturbed sequence of rock layers, the youngest rocks are located on top while the oldest rocks are found at the bottom.
This principle is based on the understanding that sedimentary layers accumulate over time, with each new layer being deposited on top of the older layers.
By observing the relative positions of different rock layers, geologists can determine the relative ages of the rocks and reconstruct the history of geological events that have shaped the Earth's surface.
Therefore, option c is correct.
Learn more about principle of superposition here:
https://brainly.com/question/30780170
#SPJ7
What was the proximate cause of the most recent mass extinction event (65 million years ago) recorded in the fossil record?
Meteorite impact was the proximate cause of the most recent mass extinction event (65 million years ago) recorded in the fossil record.
What was Meteorite impact?
A meteorite impact happens when an object that was circling the Sun that is stony, metallic (usually iron), or ice flies through the atmosphere and collides with the surface of the Earth.
What are the effects of a meteorite impact?
Asteroid impacts can have a variety of negative effects on human populations. Hills and Goda [1993] and Collins et al. [2005] both acknowledge and present a list of seven such impact effects. The five are thermal radiation, cratering, seismic shaking, ejecta deposition, and tsunami.
Learn more about Meteorite impact: https://brainly.com/question/9929282
#SPJ4
Regions have the least reduction in extreme hunger? which regions have the greatest reduction in extreme hunger?
Millennium development goal report said that the progress in reducing extreme hunger is uneven across regions and countries. Any area classified extreme poverty , that area had the least amount of drop in extreme hungry .
According to hite and seitz -"wealth and poverty ,the millennium development goals were created to provide developing countries support through the partnership of developed countries."
There are several factor which are contribute to uneven progress in reducing extreme poverty such as sex, age, disability, ethnicity or geographical condition of that area. Women are discriminated against and this is the major causes of uneven progress which keeps them in poverty longer than men.Lack of education or children in extreme poverty rarely go to school.
To learn more about the Millennium development here
https://brainly.com/question/22374447
#SPJ4
Which process is a form of mechanical weathering?
Explanation:
Mechanical Weathering Mechanical weathering, also called physical weathering and disaggregation, causes rocks to crumble. Water, in either liquid or solid form, is often a key agent of mechanical weathering. For instance, liquid water can seep into cracks and crevices in rock.
What is a popular theory for the difference in atmospheres of the jovian planets versus terrestrial planets?
High temperatures and solar wind in the inner planets allowed most of the volatiles to be driven off the terrestrial planets, but not the Jovian planets.
Terrestrial planets have higher density than Jovian planets.Jovian planets are mostly gas and liquid, terrestrial planets are solid and rocky.Jovian planets are almost gaseous and they are larger than terrestrial planets.
Planetary theory is a theory about the formation of planets. According to the planetary system hypothesis, when a planetary system forms, there will be a protoplanetary disk with material from the nebula from which the planetary system originates. This material is gradually assembled by gravity to form small pieces.
To know more about jovian planets:
https://brainly.com/question/13105744
#SPJ4
Someone on earth sees you travel 25 light years at 0.999c. they think your trip takes:_____.
Someone on earth sees you travel 25 light-years at 0.999c. They think your trip takes a little more than 25 years.
Based totally on our current understanding of physics and the boundaries of the natural world, the solution, regrettably, is not. In step with Albert Einstein's principle of unique relativity, summarized by using the famous equation E=mc2, the speed of mild (c) is something like a cosmic speed limit that can't be surpassed.
If an item ever did reach the speed of mild, its mass could grow to be countless. And as an end result, the energy required to move the item might additionally emerge as limitless: an impossibility.
To summarize, in line with the immutable legal guidelines of physics (especially, Einstein's principle of special Relativity), there may be no way to attain or exceed the velocity of light.
Learn more about Einstein's here: https://brainly.com/question/11444213
#SPJ4
Use technology to create a scatter plot of the data collected for the first ten exoplanets in Part 1. In two or more complete sentences describe the trend in the data values displayed by the scatterplot. In your description, include what type of technology was used to create the scatterplot. Upload your scatter plot and summary in the box below.
The data about exoplanets are missing here but a scatter plot is a diagram used to represent the association between two or more variables.
What is a scatter plot?A scatter plot is a graphical representation of the relationships between two or more variables, which are presented by specific dots spread along the diagram.
The main technology that can be used to diagram a scatter plot is an Excel file by going to the Insert tab (charts group) and then clicking the Scatter symbol.
In conclusion, the data about exoplanets are missing here but a scatter plot is a diagram used to represent the association between two or more variables.
Learn more about scatter plots here:
https://brainly.com/question/27874837
https://brainly.com/question/6592115
#SPJ1
What are the reasons for season change?
The earth's spin axis is tilted with respect to its orbital plane. This is what causes the seasons. When the earth's axis points towards the sun, it is summer for that hemisphere. When the earth's axis points away, winter can be expected.
Urban heat islands can negatively impact urban communities as temperatures increase from climate change. To cool urban heat islands, communities can do any of the following except: Select one: a. Plant gardens on rooftops b. Increase impervious surface c. Cover black asphalt with lighter, reflective grey coating
Urban heat islands can negatively impact urban communities as temperatures increase from climate change option b) Increase impervious surface.
Heat islands make contributions to higher daytime temperatures, reduced middle-of-the-night cooling, and higher air-pollution levels. these, in turn, contribute to warmness-related deaths and heat-related illnesses such as fashionable discomfort, respiratory difficulties, warmness cramps, heat exhaustion, and non-deadly warmth stroke.
Scientists say the “urban warmness island” effect, which could improve temperatures in towns by numerous degrees in comparison with their environment, will be a threat to human health as growing urban populations exacerbate the heating results of weather change.
These heat islands form due to the fact urban surfaces which include roadways and rooftops absorb and emit heat to a greater extent than most natural surfaces.
Learn more about temperatures here: https://brainly.com/question/25677592
#SPJ1
In 2017, 89% of the energy for the transportation sector in the usa was derived from what source?
In the year 2017, 89% of the energy used in the transportation sector came from one source which was petroleum.
What energy source is used in U.S. transportation?Even though there have been renewed efforts to find alternative sources of energy for transportation in the United States, about 89% of the energy used in the U.S. in 2017 in the transportation sector was from petroleum.
This figure only increased in 2021 when it was estimated that petroleum accounted for 90% of the energy usage in the same sector.
Find out more on energy sources at https://brainly.com/question/2038408
#SPJ1
Remote sensing data and applications thereof are particularly valuable for africa because?
Remote sensing data and its applications are particularly valuable for Africa because the African Continent is vast and many area/environment are difficult to access.
Remote that means something which is not exactly in contact or physical contact, Sensing means getting information, data something like temperature, pressure, photograph, etc.
Remote sensing is the process of acquiring information, detecting, analyzing, monitoring the physical characteristics of an area by recording it is reflected and emitted radiation energy without having any physical contact with the object under study. This is done by capturing the reflected radiation/energy.
Some specific uses of remotely sensed images of the Earth include: Large forest fires can be mapped from space, allowing rangers to see a much larger area than from the ground. Tracking clouds to help predict the weather or watching erupting volcanoes, and help watching for dust storms.
To know more about Remote sensing
https://brainly.com/question/17845191
#SPJ4
When two separate regions possess qualities that would work to complement each if unified into one unit it called?
When two separate regions possess qualities that would work to complement each if unified into one unit it is called autonomy.
The world's land and water areas are divided into subregions geographically separated by key geological features that influence large-scale ecosystems such as plains and landforms.
Language, government, or religion can define a region, as can forests, wildlife, or climate. A region, whether large or small, is the basic unit of geography. The Middle East is considered a political, ecological, and religious region possess that includes parts of Africa, Asia, and Europe.
Physical features include topography, climate, soil, and natural vegetation. For example, the peaks and valleys of the Rocky Mountains form a physical realm. Some regions are characterized by human features. These include economic, social, political, and cultural characteristics.
Learn more about complement at
https://brainly.com/question/763733
#SPJ4
What geographical knowledge did the white elites have that the slaves did not? what was the ""deliberate strategy"" of white elites regarding slaves’ geographical intelligence and why?
The geographical knowledge that the white elites had but the salves did not was that of maps, scale, ordinal directions and distance.
The white elites' "deliberate strategy" regarding slaves' geographical intelligence was limiting their geographical intelligence. This way they were able to capture the slaves, both in their mental as well as physical spheres, leaving no scope of escape for them.
The white elites never let the slaves get acquainted with their surroundings, get familiar with their location or even understand the environment around them. This way they were trapped in a land of unknowns, and had no way other than to obey their masters and carry on this practice of slavery.
To learn more about slavery, click
https://brainly.com/question/9331183
#SPJ4
Which is most likely to produce mafic lava?
a. Island arc
b. Continental arc
c. Could be either
If you said that fold f2 was a plunging fold, what is the direction of plunge?
If you said that fold f2 was a plunging fold, the direction of plunge is NE.
Syncline and anticline are terms used to describe folds based on the relative ages of folded rock layers. A syncline is a fold in which the youngest rocks occur in the core of a fold whereas the oldest rocks occur in the core of an anticline. It should be noted that an anticline refers to a type of fold that resembles an arch-like shape.
In an anticlinal fold,the core consists of the oldest rocks, and the limbs dip away from the core. In fact, an anticlinal fold is one in which the axis is elevated relative to the limbs as opposed to the syncline in which the reverse is true.
Learn more about fold:
https://brainly.com/question/14240712
#SPJ4
As you approach a steep uphill grade in the mountains,_______. speed up a little bit shift to neutral push hard on the brakes select a lower gear
As you approach a steep uphill grade in the mountains, shift to a lower gear.
When climbing steep hills, depress the gas pedal more to maintain a constant speed. You have to slow down enough that the brakes don't get too hot. If the brakes get too hot, they can start fading.
The engine needs more power to pull the vehicle up the hill. When approaching steep inclines, you should select a lower gear to maintain speed. You should do this without hesitation so as not to slow down too much before shifting into a lower gear.
If you have a manual transmission, engage 2nd or 3rd gear when climbing steep hills and stop shifting when you concentrate on the climb. Failed Climbs: Engage reverse gear to allow natural engine braking and spin the tires.
Learn more about shifting to a lower gear here https://brainly.com/question/14062348
#SPJ1
Cross pollination with media of insect is called
Cross pollination with media of insect is called Entomophily.
Hope it helps !_____________________________________________
One of the major lessons from the articles of confederation was that a very weak central government increased the security of the country.
a. True
b. False
The correct answer is option B. The statement, "One of the major lessons from the Articles of Confederation was that a very weak central government increased the security of the country" is False.
The Continental Congress approved the Articles of Confederation on November 15, 1777. This text functioned as the first constitution of the United States. It was in operation from March 1, 1781, until the current Constitution took effect in 1789.
The Articles of Confederation served as the written document that established the functions of the national government of the United States after it declared independence from Great Britain.
The failure of the Articles of Confederation was due to its design, which left the national government with little legal authority.
Learn more about Articles of Confederation here
https://brainly.com/question/13608970
#SPJ4
The air masses that have the greatest influence on weather conditions in the central united states are ________.
The air masses that have the greatest influence on weather conditions in the central United States are :- "cP and mT"
"cP and mT"
The air masses in and around North America include the continental arctic (cA), maritime polar (mP), maritime tropical (mT), continental tropical (cT), and continental polar (cP) air masses.Influence of air masses on temperature at a place.The position of a place in relation to the air mass's source and the air mass's trajectory as it departs from that region determine the impact that air masses have on a place's temperature. For instance, one's climate will be very consistent throughout the year if they are situated in the center of an air mass source region. You would be in the center of the continental polar air mass if you lived in north central Canada (cP). For the most of the year, you can anticipate chilly to frigid temperatures and low humidity levels.However, if you live in central Illinois, you will experience a much greater variation in temperature because you are in the boundary zone between several different air masses. Two air masses in particular influence this region, cP and mT. The cP air brings cool, dry weather while mT air is responsible for humid and warm conditions. When these air masses collide, storms are generated.To learn more about Air Masses, click the links.
https://brainly.com/question/19626802
#SPJ4
A point b on a segment with endpoints a (1,4) and c (8,2) partitions the segment in a 3:1 ratio. find the coordinates of point b
Our overall goal in this problem is to find the location of a point b that lies on the line between points A and C.
What do know from what's given?
Location of point A
Location of point C
The relative distance of point B along the segment/line AC (given as a ratio of 3:1)
Now that we have listed everything we know, lets figure out what we can calculate based on this information:
Since we have both the locations of points A and C, lets calculate the length of this segment. For this we can think of this edge as the hypotenuse of a right triangle that is formed from the height (which is the distance between the x-coordinates) and the base (which is the distance between the y-coordinates).
We'll need two equations here:
Distance:
Calculate the distances for the height and the base of this triangle formed from the segment AC (the hypotenuse of the right triangle)
a (base) = |x2 - x1| ... where A (x1,y1) and C (x2,y2)
b (height) = |y2 - y1| ... where A (x1,y1) and C (x2,y2)
Note: Absolute value is used here since distance is always positive
Pythagorean Theorem:
Once we know the distance of the base and the height, we'll be able to calculate the segment (aka the hypotenuse of this formed triangle)
c2 = a2 + b2
After we calculate the distances for a and b, we can then solve for c, giving us the length of segment AC. Great! We're halfway there - next is to figure out how far point B is from points A and C, using the distance along the segment AC.
Recall the third piece of information we were given: the relative distance of point T along segment AC. How can we represent this information in an equation using the distance of segment AC?
The ratio to which point T splits the segment AC is given as 3:1 - this means that one part is 3 times as long as the other part. The natural question to ask here is "3 times as long as what?" This 'what' piece is what we want to find out - lets call it x.
Another important observation to make is that this ratio is describing two parts of a whole segment - so if we think of this is two pieces of a whole, we can think of it as '3 times something' and '1 times something' is equivalent to the entire segment.
So, using this terminology with x, lets rewrite what we said in words into an equation:
3x + 1x = c (Length of AC)
Solving for x, we see that x = [tex]\frac{C}{4}[/tex]
Now that we have the distance from point D to point T, and from Point T to point F, we can take up the final step of determining the location of T.
Lets imagine the entire segment ABC as the hypotenuse of a triangle again. This time we want to imagine (feel free to draw this yourself as well) a like straight down from T, perpendicular to the base of this right triangle.
What we have now is a small right triangle (with segment DT as the hypotenuse) within a larger right triangle (with segment DF as the hypotenuse). What this means is that we have two proportional triangles.
With this information, we can create a proportion statement that says:
(AT) Hypotenuse small Triangle / Height smallTriangle ~ (AC) Hypotenuse large Triangle / (b) Height large Triangle
Recall that we had solved for b in the beginning as the y distance between points D and F. This means the only variable missing is Height small Triangle, which results to be:
Height small Triangle = (AT) Hypotenuse small Triangle × (b) Height large Triangle / (DF) Hypotenuse large Triangle
Adding Height small Triangle to the y coordinate of point F gives us point T's y coordinate.
Now that we have the hypotenuse length and the height length of the small triangle formed by AT (as the hypotenuse) we can plug in those numbers into the Pythagorean theorem to since for there final missing side: the base:
Base small Triangle 2 = (AT) Hypotenuse small Triangle 2 Height small Triangle 2
Finally, we add Base small Triangle to the x coordinate of point B gives us point T's x coordinate.
Learn more about point segment :
brainly.com/question/4939857
#SPJ4
What did kepler discover about the periods of planets and their distances from the sun?.
What may have caused mercury to have a large metallic core and a relatively thin crust?
What type of metamorphism affects the greatest volumes of rock and produces the greatest variety in metamorphic rock types?
How will population growth affect the frequency of earthquakes that result in more than 1 million deaths?
We may experience them as often as once per century: five times as frequently as now population growth affects the frequency of earthquakes that result in more than 1 million deaths.
Population growth and distribution, especially increasing population density and urbanization, increase vulnerability to disasters. Nearly 80% of the U.S. population lives in urban areas, with a growing population concentration in coastal areas and flood-prone areas.
The pressure of population growth is forcing many people to migrate to another region in a highly precarious situation. Humiliation and poverty. Lack of minimal health care and basic education are exacerbating factors that can turn emergencies into disasters and social tensions into complex emergencies.
Learn more about population growth at
https://brainly.com/question/1437549
#SPJ4
Which region has the second worst health indicators: A. South Asia B. The Middle East and North Africa C. Sub-Saharan Africa D. Latin America and the Caribbean
Which region has the second worst health indicators: A. South Asia
South Asia is the southern region of Asia defined both geographically and ethnoculturally. This region consists of the countries of Afghanistan, Bangladesh, Bhutan, India, Maldives, Nepal, Pakistan, and Sri Lanka. Topographically, it is dominated by the Indian Plate and is largely defined by the Indian Ocean to the south and the Himalayas, Karakoram, and the Pamir Mountains to the north. Almost synonymous with historical India, South Asia continues to have many unfortunate features. Majesty.
In most of these South Asian countries, the basic demographics that affect health care are very similar. Most countries in South Asia face serious health problems, with affordability and accessibility of medical assistance being major challenges. Retaining qualified doctors is another major challenge.
Learn more about health here: https://brainly.com/question/1382377
#SPJ1
What is the amount of time added to or subtracted from coordinated universal time to determine local time?.
Time offset is the amount of time added to or subtracted from coordinated universal time to determine local time.
Time zone →
A time zone is a geographical region in which residents observe the same standard time. Although nominally a new time zone is established every 15 degrees east or west of the prime meridian (meaning a one hour change in solar time), in practice local geographical or political considerations may vary its application. The most extreme example of this is time in China, which applies a single standard time offset of UTC+08:00 (eight hours ahead of Coordinated Universal Time), even though China spans five geographical time zones.
Time offset:
The UTC offset (or time offset) is an amount of time subtracted from or added to Coordinated Universal Time (UTC) time to specify the local solar time (which may not be the current civil time, whether it is standard time or daylight saving time)
Learn more about time offset:
brainly.com/question/27803849
#SPJ4
The directions of North, South, East, and west
Answer:
At your back, the South (S). To make orientation work easier, maps usually have the North direction at the top of the sheet of paper. So East is always on the right, West is always on the left, and the South direction is always down.
Hope I helped you, good studies!
The reason that most extrasolar planets are found close to their parent stars is.
For which year since 1985 does the animation show the greatest extent of arctic sea ice coverage?
For which year since 1985 does the animation show the greatest extent of arctic sea ice coverage: 1996
Animation is a technique wherein figures are manipulated to seem like transferring photos. In animation, photographs are drawn or painted by hand on transparent celluloid sheets to be photographed and exhibited on film. today, most animations are made with computer-generated imagery (CGI).
Forms of Animation
Traditional Animation.2D Animation.3D Animation.Movement Graphic.There are four styles of animation consequences in PowerPoint – entrance, emphasis, go out, and movement paths. these mirror the point at which you want the animation to arise.
learn more about animation here
https://brainly.com/question/20098799
#SPJ1
The practice of moving gardens to new areas, cutting down fast-growing trees, burning the undergrowth, and planting crops is called?
The practice of moving gardens to new regions, slicing down speedy-developing timber, burning the undergrowth, and planting crops are referred to as decrease and burn.
Gardens are usually considered female and constitute fertility. lastly, these places are symbols of happiness, salvation, and purity. Gardens are used to create peace between human beings due to the fact they constitute inclusion and community.
A garden is defined as a space wherein flowers or fruits and veggies are grown, or a public area with ornamental flowers. An example of a garden is a victory lawn within outside, used for growing meals. An instance of a garden is the gardens of Versailles. A backyard or lawn.
The true shape inside the normal layout, blended with a hardscape that meets your desires for provider and amusement, creates the correct place in which you can locate favorite plant life -- trees, shrubs, groundcovers, plant life, and seasonal boxes
Learn more about Gardens here: https://brainly.com/question/4014419
#SPJ1