One recent concern of the EPA is an increase in the atmosphere's carbon dioxide content, a phenomenon known as the greenhouse effect.
ABOUT GREENHOUSE EFFECTIn general, the greenhouse effect is defined as the process of increasing the earth's temperature caused by changes in the composition of the atmosphere. Causes sunlight to remain on earth and cannot be reflected perfectly, leaving the atmosphere.
The greenhouse effect was first introduced to the general public in 1824 by a scientist named Joseph Fourier. According to the opinion that Joseph Fourier conveyed to the public. He considered the greenhouse effect to be a warming process caused by the composition of the atmosphere.
If it is interpreted according to the processes and consequences arising from the greenhouse effect, it is a natural phenomenon that occurs due to the reflection of sunlight that passes through the earth's atmosphere. Caused by various substances present on the earth's surface, the severity of this phenomenon can damage the atmosphere blanket.
Learn more about greenhouse effect at
https://brainly.com/question/13706708.
#SPJ4
is c2h2o4 readily soluble in water
Yes, It is true that C2H2O4 is readily soluble in water and it named as oxalic acid.
Oxalic acid can be effectively dissolved by the water molecules around it because it has relatively small molecules and no alkyl chain to lessen its acidic character. This makes it soluble in water. When the hydrogens are separated, the mutual inductive effect of the two carboxyl functional groups aids in stabilising negative charges, favouring this separation. The chemical formula for oxalic acid is HOOC-COOH. In polar solvents like water, it can dissolve into protons and carboxyl groups, which causes it to ionise. The acid becomes soluble as a result of this. Here is how the separation happens is shown below,
HOOC-COOH → COO-COO + 2H+.
To learn more about oxalic acid visit,
https://brainly.com/question/10967292
#SPJ4
the mole is a counting unit defined as 1 mole = 6.022 × 10^23 objects. if you have a sample with 2.02 × 10^22 h2o molecules, how many moles of water would the sample contain?Enter the value using exponential notation, e.g. 1.23 × 10^4 would be entered as 1.23E4.(value ± 2%)
If you have the sample with 2.02 × 10²² H₂O molecules. The number of moles of water in the sample is 3.3 E⁻².
The one moles of the substance = 6.022 × 10²³ molecules
The number of molecules of water = 2.02 × 10²² molecules
The number of the moles of water is as follows :
The number of the moles of water = 2.02 × 10²² / 6.022 × 10²³ moles
The number of the moles of water = 3.3 × 10⁻² moles
Thus, number of moles of water is 3.3 × 10⁻² moles in 2.02 × 10²² molecules .
In the exponential notation is 3.3 E⁻² .
To learn more about moles here
https://brainly.com/question/30452126
#SPJ4
high-resolution mass spectrometry is advantageous in determining what key feature of an unknown molecule?
Option C is correct. High-resolution mass spectrometry is advantageous in determining the key feature of an unknown molecule will be molecular formula.
High-resolution mass spectrometry (HRMS) is an analytical technique which is used to determine the atomic masses of an organic and inorganic molecules or monatomic ions which is present in different kinds of samples. High resolutions can be achieved through a variety of different mass spectrometers, yet the fundamental workings will be similar.
HRMS analysis begins by passing a sample into the spectrometer, where it will be ionized. The formed ions will travel along with the spectrometer's length, and it is separated by their relative charges and masses. Once the ions reach the end of the spectrometer, they are picked up by a detector, and the information will be logged on a computer.
To know more about High-resolution mass spectrometry here
https://brainly.com/question/28587595
#SPJ4
--The given question s incomplete, the complete question is
"High-resolution mass spectrometry is advantageous in determining what key feature of an unknown molecule? A) functional group B) atomic structure C) molecular formula D) carbon hydrogen structure"--
what is the equation for the rate of formation of 1-iodobutane from the reaction of 1chlorobutane (bucl) with nai by an sn2 mechanism? a. b. c. d. rate
Option (b) is correct. The equation for the rate of formation of 1-iodobutane from the reaction of 1-chlorobutane with NaI by SN2 mechanism is K [BuCl] [NaI].
SN2 mechanism is also called bimolecular nucleophilic substitution reactions. In this reaction the nucleophile attacks and the leaving group leaves is simultaneous. so the bond making between the nucleophile and the electrophilic carbon occurs at the same time as the bond breaking between the electrophilic carbon and the halogen. It is a type of nucleophilic substitution where a lone pair of electrons on a nucleophile attacks an electron deficient electrophilic center and bonds to it resulting in the expulsion of a leaving group. This reaction is stereospecific. The rate determining step of SN2 mechanism include both the alkyl halide as well as nucleophile as both will be present in the transition step and a 5 membered unstable intermediate will be involved.
To learn more about SN2 mechanism please visit:
https://brainly.com/question/14150949
#SPJ4
The complete question is,
What is the equation for the rate of formation of 1-iodobutane from the reaction of 1chlorobutane with NaI by an sn2 mechanism?
a. Rate = k[BuCl]
b. Rate= k [BuCl] [NaI]
c. Rate = k[NaI]
d. Rate = K [ Bucl]2
a 25.0-ml sample of 0.150 m hydrofluoric acid is titrated with a 0.150 m naoh solution. what is the ph after 13.3 ml of base is added?
The pH of a 25.0-mL sample of 0.150 M hydrofluoric acid titrated with a 0.150 M NaOH solution after 13.3 mL of base is added is 8.11. This can be calculated using the following equation:
pH = -log10(Ka * ([H3O+] / [HF]))Where Ka is the acid dissociation constant of hydrofluoric acid (3.5 x 10^-4), [H3O+] is the molar concentration of hydrogen ions, and [HF] is the molar concentration of hydrofluoric acid.
Since the volume of the solution is 25.0 mL and the molarity of the hydrofluoric acid is 0.150 M, the molar concentration of hydrofluoric acid is 0.150 M.
After 13.3 mL of NaOH is added, the molar concentration of hydrogen ions is (0.150 M * 13.3 mL) / 25.0 mL = 0.066 M.
Substituting these values into the equation gives: pH = -log10(3.5 x 10^-4 * (0.066 / 0.150)) = 8.11.
Learn more about hydrofluoric acid:
https://brainly.com/question/24030738
#SPJ4
Explain in your own words what the author means when he says that “on a molecular level, no one compound is grosser than any other.”
When the author states that "on a molecular level, no one compound is grosser than any other," he is suggesting that at the smallest level of matter, which is the molecular level, there is no inherent difference between different compounds.
What is the molecular level about?All compounds are made up of molecules, which are simply collections of atoms. The atoms themselves are made up of protons, neutrons, and electrons, which are all subatomic particles.
Thus, the author is saying that on a molecular level, all compounds are made of the same basic building blocks, and therefore, no one compound is fundamentally different or "grosser" than any other. It could be that the author is trying to make a point about the subjective nature of describing something as "gross" or not, and how this is not a scientifically valid way to measure the properties of a compound.
In summary, the author is pointing out that at the molecular level, all compounds are made up of the same building blocks, and therefore, one compound is not inherently "better" or "worse" than another.
Learn more about molecular level from
https://brainly.com/question/20455963
#SPJ1
Problem 2: Derivation of Transport Equation for a Sedimenting Suspension. There are many parallels among momentum, mass, and energy transport because all three are derived from similar conservation laws. In this problem we derive a microscopic balance describing the concentration distri- bution o(x, t) of a very dilute suspension of small particles suspended in an incompressible fluid undergoing unsteady flow. (Note: $(x, t) is the local vol- ume frction of particles in the fluid (ie, volume of particles/volume of Auid) and hence is dimensionless.] (a) The flux of particles is the sum of that due to convection, that due to settling q: (a vector), and that due to diffusion qp (also a vector). These fluxes have units of volume per area per time (eg, velocity). With this in mind, write an integral balance from the conservation of particles for an arbitrary control volume D. Using the divergence theorem, convert all surface integrals to volume integrals, and so obtain a microscopic equation valid at any point in the flow field. (b) For small particles of radius a, the flux that is due to settling is given by: as 2 ga? Ap oź 9 (3) and the diffusive flux by KT D VO (4) 6πμα where g is the graviational acceleration, Ap is the difference in density be- tween the particles and fluid, p is the viscosity of the fluid, and KT is the thermal energy of the fluid (k is the Boltzmann constant, T is temperature). Using these results, obtain an equation in terms of derivatives of the concentration.
The divergence theorem in vector calculus, commonly referred to as Gauss' theorem or Ostrogradsky's theorem, establishes a relationship between a vector field's flow through a closed surface and its divergence in the volume it is contained in.
The divergence theorem explains that the flux through the surface, which is the surface integral of a vector field over a closed surface, is equal to the volume integral of the divergence over the area inside the surface. It implies that the net flux out of a region is equal to the total of all the field sources in the region, with sinks being considered negative sources.
In specifically in electrostatics and fluid dynamics, the divergence theorem is a significant finding in the mathematics of physics and engineering. Typically, it is utilized in three dimensions in various fields. It can, however, apply to any number of dimensions. It is analogous to integration by parts in a single dimension. It is analogous to Green's theorem in two dimensions.
Learn more about electrostatics from here:
https://brainly.com/question/9774180
#SPJ4
I WILL GIVE 36 POINTS TO THOSE WHO ANSWER THESE PROBLEMS RIGHT NOOOO SCAMS PLEASE
One molecule of glucose contains 6 atoms. Compounds are stable when the atoms involved have an entire outermost electron shell.
What causes atoms to become charged when an ionic bond is formed?
Atoms become charged when an ionic bond is formed due to the transfer of electrons from one extent to another. This constructs a positive ion known as a cation and a negative ion known as an anion that is attracted to each other and forms an ionic bond.
The columns that are vertical in the periodic table are called groups or families.
Where are non-metals located on the periodic table?
Non-metals are typically located on the right side of the periodic table.
To know more about non-metals, visit here:
brainly.com/question/29404080
#SPJ1
which one of the following summary reactions requires energy? (a) pgal pyruvic acid (b) pyruvic acid acetyl group (c) adp p atp (d) acetyl group co2 and water
The following summary reactions requires energy is the c) ADP + P --> ATP.
This reaction ADP + P --> ATP is the endergonic reaction. The ATP stands for the adenosine triphosphate. The ADP to ATP conversion reaction is given as :
ADP + P --> ATP
This conversion is take place in the mitochondria. The mitochondria is the energy producing organelles. It also can occur in the cytoplasm which is the fluid in between the cell membrane and nucleus. The pyrophosphate bond is the covalent bond which stores the energy. The enzymes chains are present in the electron transport chain present in the mitochondria walls.
To learn more about ADP here
https://brainly.com/question/10942096
#SPJ4
atoms of which element are reduced in the reaction? (a) s; each atom loses four electrons (b) na in na2o2; each atom loses one electron (c) o in na2o2; each atom gains one electron (d) o in h2o; each atom gains one electron
The elements that are reduced in the reactions are sulfur (a) and sodium (b), while the elements that are oxidized are oxygen (c and d).
In the chemical reaction a), sulfur (S) atoms are reduced because each atom loses four electrons, which results in a lower oxidation state for the sulfur. This means that electrons have been transferred from the sulfur to another species in the reaction, resulting in the reduction of the sulfur.
In the reaction b), sodium (Na) atoms are reduced because each atom loses one electron. The reduction of sodium is indicated by a decrease in its oxidation state, which occurs when electrons are transferred from the sodium to another species in the reaction.
In the reaction c), oxygen (O) atoms are oxidized because each atom gains one electron. The oxidation of oxygen is indicated by an increase in its oxidation state, which occurs when electrons are transferred to the oxygen from another species in the reaction.
In the reaction d), oxygen (O) atoms in H2O are oxidized because each atom gains one electron. The oxidation of oxygen is indicated by an increase in its oxidation state, which occurs when electrons are transferred to the oxygen from another species in the reaction.
Learn more about sulfur:
brainly.com/question/13469437
#SPJ4
(iii) The filtrate was an alkaline solution of potassium carbonate. This was titrated
against a standard hydrochloric acid solution to find the concentration of the
potassium carbonate.
K₂CO₂ + 2HC1
2KCI+ CO₂ + H₂O
Methyl orange was used as an indicator, this turns from yellow in the potassium
carbonate solution to pink when the potassium carbonate is neutralised by the
hydrochloric acid. The following results were obtained using 25.00 cm³ samples of
the potassium carbonate solution.
Burette finish/cm³
Burette start / cm³
24.80
0.00
26.20
1.60
26.55
2.00
I Calculate the mean volume of hydrochloric acid added, using all three sets
of results.
[1]
(b) In another experiment Penny obtained white crystals of potassium carbonate, K₂CO3,
from the wood ash.
(1) Show that the percentage by mass of potassium in K₂CO, is 56.6.
[2]
Ans
SESTS
Answer:
h
Explanation:
I. To calculate the mean volume of hydrochloric acid added, you need to find the average of the three values obtained from the burette readings.
First set: 24.80 - 0.00 = 24.80 cm³
Second set: 26.20 - 1.60 = 24.60 cm³
Third set: 26.55 - 2.00 = 24.55 cm³
The mean volume of hydrochloric acid added is (24.80 + 24.60 + 24.55) / 3 = 24.66 cm³
b. (1) To find the percentage of potassium in K₂CO₃, you need to calculate the mass of potassium in the compound and divide it by the total mass of the compound, then multiply by 100.
The relative atomic mass of potassium is 39.1 and the relative atomic mass of carbon is 12.01 and oxygen is 16.00.
So, the mass of potassium is 2 x 39.1 = 78.2 g.
The mass of carbon is 1 x 12.01 = 12.01 g.
The mass of oxygen is 3 x 16.00 = 48.00 g.
The total mass of the compound is 78.2 + 12.01 + 48.00 = 138.21 g.
The percentage by mass of potassium in K₂CO₃ is (78.2 / 138.21) x 100 = 56.6%.
Which of the following processes takes place upon absorption of infrared radiation? Select one: a. nuclear spin flip b. bond vibration c. electron excitation d. electron spin flip
The process that takes place upon absorption of infrared radiation is bond vibration. So the correct option is "b".
Infrared radiation has a longer wavelength than visible light and does not have enough energy to cause an electron excitation or an electron spin flip. However, it does have enough energy to cause bond vibrations, which is why it is used in spectroscopy to measure the vibrational frequencies of chemical bonds.
Bond vibration occurs when infrared radiation interacts with molecules. The radiation has enough energy to cause the vibrational frequency of the chemical bonds to increase, which can be detected in spectroscopy. This increase in vibration is caused by the conversion of the radiation energy to vibrational energy of the molecule. The vibrational energy can then cause changes in the shape of the molecule, resulting in the stretching and bending of the bonds.
To know more about infrared radiation please refer:
https://brainly.com/question/13934832
#SPJ4
9. The diagram below depicts a compound.
Ca
Ca++
P-
P-
Ca
Use depiction of the chemical structure of this compound to write the chemical formula for each
listed compound. Then, write the formula for each ion that makes up the compound. Be sure to
indicate the charge of the ion.
Chemical Formula
Cation
Anion
Answer:
The chemical formula for the compound depicted in the diagram is: Ca3(P2O4)2
The cations in the compound are:
Ca2+ (calcium ion)
The anions in the compound are:
P3- (phosphite ion)
O2- (oxide ion)
Explanation:
Hope this helps!
palladium metal has a density of 12.0 . assuming the palladium atomic radius is 137 pm, is the unit cell of the element primitive cubic, body-centered cubic, or face-centered cubic?
A quantity of 6.023 x [tex]10^{23}[/tex] atoms of an element equals one gram of that element.
The mass of the element is defined as 1 g.atom of the element when its relative atomic mass is represented in grams.
Density = mass / volume.
There are 4 atoms to the unit cell in a fcc.
(4×atomic mass /6.02 x 10^23) = mass of unit cell
(4×106.42 g/mol) / (6.02 x 10^23) = 7.07 x 10^-22 g
Density = mass/volume
? V = mass / density
V = 7.07 x 10^-22 g / 12.0 g/cm³
V = 5.89 x 10^-23 cm³
For the FCC configuration, 4r = a×v2
a = 4r /v2, also V (cell) = a³
a³ = 5.89 x 10^-23 cm³
a = 3.89 x 10^-8 cm
a = 4r /v2 , where r = atomic radius
3.89 x 10^-8 cm = 4r / v2
r = 1.38 x 10-8 cm
1 cm = 1 x 10^10 pm
1.38 x 10^-8 cm × (1 x 10^10 pm / 1 cm) = 138 pm
r = 138 pm.
Learn more about atoms:
brainly.com/question/13654549
#SPJ4
an element has two naturally occurring isotopes. isotope 1 has a mass of 190.9606 amu and a relative abundance of 37.3 % , and isotope 2 has a mass of 192.9629 amu . find the atomoic mass
The atomic mass of this element is 192.22 amu. This is calculated by taking the weighted average of the masses of the two isotopes, which is (190.9606 x 37.3%) + (192.9629 x 62.7%) = 192.22 amu.
The atomic mass of this element is calculated by taking the weighted average of the masses of the two isotopes.
This means that you multiply the mass of each isotope by its relative abundance (the fraction of that isotope that exists in the element) to get the weighted average mass.
For example, in this case the first isotope has a mass of 190.9606 amu and a relative abundance of 37.3%. This means that the contribution of this isotope to the atomic mass is (190.9606 amu x 0.373) = 70.9043 amu. Similarly, the contribution of the second isotope is (192.9629 amu x 0.627) = 121.3179 amu. When these two contributions are added together you get the atomic mass of 192.22 amu.
Learn more about atomic mass:
https://brainly.com/question/30390726
#SPJ4
Which atoms would you consider more electronegative than carbon? Mark all that apply.Which of these bonds would you consider a polar covalent bond? Mark all that apply.What part of the statement below is incorrect? Rewrite the statement such that it displays the correct reasoning behind why nonpolar molecules do not dissolve in water. (mark all that apply)
Fluorine (F), oxygen (O) and nitrogen (N) are more electronegative as compared to carbon.
Hence, the correct options are options a, b and c.
Electronegativity is basically the chemical property that elaborates the tendency of a particular atom atom or a particular functional group to attract the electrons toward itself. The electronegativity of a particular atom is affected by both its atomic no. as well as the distance between its valence electrons and the charged nuclei.
Fluorine has the oxidation number of -1 and has a very small size due to which it is the most electronegative element in the modern periodic table. The electronegativity of oxygen and nitrogen is greater as compared to carbon as they have greater tendency to attract electrons while carbon has a stable state and therefore it is difficult for it to gain 4 electrons.
--The given question is incomplete, the complete question is
"Which atoms would you consider more electronegative than carbon? Mark all that apply:
a. F
b. O
c. N
d. H"--
To know more about electronegative here
https://brainly.com/question/13889165
#SPJ4
changes to the identity of matter are called
Chemical Change. Chemical changes occur when bonds are broken and/or formed between molecules or atoms. This means that one substance with a certain set of properties (such as melting point, color, taste, etc) is turned into a different substance with different properties
Answer: Chemical Change.
Explanation: Chemical changes occur when bonds are broken and/or formed between molecules or atoms. This means that one substance with a certain set of properties (such as melting point, color, taste, etc) is turned into a different substance with different properties
Which solution will contain the higher concentration of hydroxide ions? 0.5 mol/L sodium hydroxide or 0.25 mol/L barium hydroxide
A.sodium hydroxide
B. barium hydroxide
C. They contain the same concentration of hydroxide ions.
D. Neither solution will contain hydroxide ions. This must be determined experimentally.
The solution that contains the higher concentration of hydroxide ions , 0.5 mol/L sodium hydroxide or 0.25 mol/L barium hydroxide is the correct option is A. sodium hydroxide.
The NaOH that is the sodium hydroxide solution contains the highest concentration of hydroxide ions. This is for the reason that sodium hydroxide (NaOH) is the very strong base and will dissociates almost completely in the water and produce the Na⁺ ion and OH⁻ ion.
The concentration formula in mol/L is :
Concentration = moles / volume in L
Thus, the 0.5 mol/L sodium hydroxide will contains the higher concentration of the hydroxide ions.
To learn more about concentration here
https://brainly.com/question/29250352
#SPJ4
Please help me, I greatly appreciate your help :)
What is the best way to fill the graduated cylinder EXACTLY to the 10.0 mL marking? -By adding small amounts of water using a medicine dropper once the meniscus is near the desired volume.
The best way to fill a graduated cylinder exactly to the 10.0 mL marking is by adding small amounts of water using a medicine dropper once the meniscus is near the desired volume.
A graduated cylinder is a laboratory tool used to measure the volume of a liquid. The cylinder is marked with graduation lines at regular intervals, which allow the user to determine the volume of a liquid based on its height in the cylinder.
To fill a graduated cylinder exactly to the 10.0 mL marking, it is best to use a medicine dropper or a pipette, as this will allow you to add small amounts of liquid to the cylinder. This is especially important when filling the cylinder to an exact volume, as it is easier to be precise with small additions of liquid than it is with larger amounts.
When using a medicine dropper or a pipette, it is important to add the liquid slowly and watch the meniscus, which is the curved surface of the liquid at the top of the cylinder. The meniscus should be observed from eye level, with the graduation lines in focus. As you add the liquid, the meniscus will rise in the cylinder, and you should stop adding liquid when the meniscus reaches the 10.0 mL marking.
To learn more about medicine , visit:
https://brainly.com/question/21486381#
#SPJ11
how many liters of 18% alcohol solution should be added to 4 liters of 70% alcohol solution to make a 50% solution?
The liters of alcohol that we need to make the solution are: x = 2.4L
To make a 50% alcohol solution from 4 liters of 70% alcohol solution and 18% alcohol solution, you will need to add 2.4 liters of 18% alcohol solution. This can be calculated using the following equation:
4L(70%) + xL(18%) = 5L(50%)
Solving for x:
x = (5L(50%) - 4L(70%)) / 0.18
x = 2.4L
The concentration of a solution is a measure of how much of a solute (the substance being dissolved) is dissolved in a solvent (the liquid or gas in which the solute is dissolved). The concentration of a solution is usually expressed in terms of moles or mass per volume, and it is typically expressed as a percentage or a fraction.
Learn more about solutions of alcohol:
https://brainly.com/question/30221747
#SPJ4
Please Help Me:
Five liters of air at -36 c is warmed to 89c. what is the new volume if the pressure remains constant?
Five liters of -36 °C air are heated to 89 °C. If the pressure doesn't change, the new volume, V2, is 7.64 liters.
What is an illustration of pressure?Pressure is the measure of how much force is exerted on a particular area. Pressure is defined as Force per Area. An object is under pressure when a force is applied to a portion of its surface. The pressure divided by the surface where another force is exerted is the expression for compression. If you touch the flat part of something, like a scalpel even, across fruit, the covering will hold up. A large area is covered by the force.
What factors determine pressure?P = F / A, usually force per unit of area, is the formula for computing pressure. The sign for temperature in particle physics is p, and the basic measurement for determining pressure loss is the pascal.
To know more about pressure visit:
https://brainly.com/question/2704868
#SPJ1
explain why coders must reference both the alphabetic index and tabular list.
Coders must reference both the alphabetic index and tabular list because the Alphabetic Index does not always give the full code. Referring to the Tabular List to verify that no other character will be required.
It is essential to use both the Alphabetic Index as well as Tabular List when locating and assigning a code. The Alphabetic Index does not provide the full code. Selection of the full code, including laterality and any applicable seventh character, can only done in the Tabular List.
As with the CPT, procedures and services are looked up in the Alphabetic Index, as well as the Tabular List which is used to confirm that the code is most accurate and appropriate one.
To know more about tabular list here
https://brainly.com/question/19250157
#SPJ4
the laboratory procedure calls for 50.00 ml of cuso4 solution with a concentration of 0.300 m. what mass of cuso4∙5h2o is required to prepare this solution?
The laboratory procedure is for the 50.00 ml of the CuSO₄ solution with the concentration of 0.300 M. The mass of CuSO₄.5H₂O is required to prepare this solution is 2.5 g CuSO₄.5H₂O .
The concentration of the CuSO₄ = 0.300 M
The volume = 50 mL
The moles of CuSO₄ = 0.300 × 0.050
= 0.015 mol
Mass of CuSO₄ = moles × molar mass
= 0.015 × 159.6
= 2.39 g
There are 5 moles of H₂O :
= 159.6 / ( 159.6 + 5 × 18 ) × 100 %
= 63.9 % of CuSO₄
The mass of the CuSO₄.5H₂O = 2.39 ( 100 × 5H₂O / 63.6 )
= 2.5 g CuSO₄.5H₂O
To learn more about concentration here
https://brainly.com/question/15348078
#SPJ4
20 points!!! can someone help me with this? I got all the data I am just confused on what 'state of matter' means. They give you the data, its in the pdf my assignment is the document, but I need the answers to state of matter. I will mark you brainliest if its correct!
the fact that water is a liquid at room temperature is best explained by the existence of .
Option (c) is correct. The Hydrogen bond makes the water liquid at room temperature.
The hydrogen bond in water is covalently bonded to the central oxygen atom by a pair of electrons that are shared between them. In water, only two of the six outer-shell electrons of oxygen are used for the purpose of leaving four electrons which are organized into two non-bonding pairs. The four electron pairs surrounded the oxygen tend to arrange themselves as far from each other as possible in order to minimize repulsions between these clouds of negative charge in the water. The water molecule is electrically neutral. The positive and negative charges are not distributed uniformly in water.
To learn more about Hydrogen bonding in water please visit:
https://brainly.com/question/30420706
#SPJ4
The complete question is,
Which of the following factors is responsible for the fact that water is a liquid at room temperature?
a. Covalent bond
b. Ionic bonds
c. Hydrogen bonds
d. Hydrophobic bonding between water molecules
e. The molecular weight of water.
The indicator phenolphthalein has a pH range of 8.2 to 10.0 over which it undergoes a color change from colorless to pink.
What color will the indicator be in a solution of hydrochloric acid?
The color of phenolphthalein indicator in a solution of hydrochloric acid will be colorless.
Phenolphthalein is a weak acid that changes color over a pH range of 8.2 to 10.0, going from colorless to pink as the pH increases. In a solution of hydrochloric acid, the pH is less than 8.2, so the phenolphthalein will not be pink, but will remain colorless. This indicates that the solution is acidic, with a pH lower than 8.2.
Phenolphthalein is often used in laboratory experiments, especially in the field of chemistry, to determine the endpoint of titrations and to monitor the pH changes during a reaction.
The color change of phenolphthalein occurs because the pink form of the indicator is a weak base and the colorless form is a weak acid. In an acidic solution, phenolphthalein will exist in its colorless, acidic form, and in a basic solution, it will exist in its pink, basic form. The exact pH range over which the color change occurs depends on the concentration of the phenolphthalein solution, but it is typically between 8.2 and 10.0.
Learn more about phenolphthalein here:
https://brainly.com/question/29583208
#SPJ4
calculate the grams of ethane present in a sample containing 0.1376 moles if the molar mass of ethane is 30.067 g/mol.
There are 4.17 grams of ethane present in a sample containing 0.1376 moles if the molar mass of ethane is 30.067 g/mol.
The number of grams of ethane in a sample can be calculated by multiplying the number of moles of ethane by its molar mass. The molar mass of ethane is 30.067 g/mol, so the number of grams of ethane in the sample is:
0.1376 moles * 30.067 g/mol = 4.17 g
The molar mass of a substance is defined as the mass of one mole of that substance and is usually expressed in g/mol. A mole is a unit of measurement for the amount of a substance, defined as Avogadro's number of entities (atoms, molecules, ions, etc.). One mole of a substance contains Avogadro's number of entities of that substance.
Learn more on ethane :
https://brainly.com/question/1523415
#SPJ4
When working in the fume hood, it is important to make an effort to minimize _____ Only keep items in the hood if they are being used for ______ Do not ______ chemicals in the fume hood unless instructed to do so.
When working in the fume hood, it is important to make an effort to minimize airflow disruption, Only keep items in the hood if they are being used for experiments, Do not store chemicals in the fume hood unless instructed to do so.
When working in a fume hood, the goal is to minimize the disruption of airflow in the hood to help ensure that hazardous chemicals and fumes stay inside the hood and away from the person using it. To do this, you should only keep items in the hood that are actively being used for experiments. Do not store chemicals in the fume hood, unless you have been specifically instructed to do so by a lab supervisor or another authority figure.
To learn more about fume hood, visit:
https://brainly.com/question/29069541#
#SPJ11
what is the density of the nucleus of an carbon-12 atom with a nuclear radius of 2.70 x 10-13 cm and a mass of 2.0 x 10-23 g
The density of Carbon-12 nucleus is, [tex]1.21 \times 10^{14} \ g/cm^3[/tex].
Nuclear density states that density of the nucleus of an atom, is the ratio of mass per unit volume inside the nucleus. Since the atomic nucleus carries most of the atom mass and the atomic nucleus is very small in comparison to the entire atom, the nuclear density is very high.
The Volume of nucleus can be determined using the formula,
[tex]V = \dfrac{4}{3} \times \pi \times R^{3}[/tex]
The nuclear radius is [tex]2.70 \times 10^{-13}[/tex] cm.
Volume = [tex]\dfrac{4}{3} \times \pi \times (2.70 \times 10^{-13})^{3}[/tex]
Volume = [tex]82.45 \times 10^{-39} cm^{3}[/tex]
The mass of nucleus is, [tex]1.0 \times 10^{-23}[/tex] g.
Density = [tex]\dfrac{mass}{volume}[/tex]
Density = [tex]\dfrac{1.0 \times 10^{-23}}{82.45 \times 10^{-39}}[/tex]
Density = [tex]1.21 \times 10^{14} \ g/cm^3[/tex]
The density is [tex]1.21 \times 10^{17} \ kg/m^3[/tex]
To know more about the nuclear density, here
brainly.com/question/13266571
#SPJ4
