The volume (in ml) would we expect to use for our third trial with 2.0453 g of KHP will be 33.0 ml
Molarity of NaOH = 0.30 molar
Mass of KHP = 2.0353 G
Molar mass of KHP = 204.2 g/mol
Volume of NaOH = ?
First we will find out the number moles of KHP
number of moles = mass / molar mass
number of moles of KHP = 2.0453 g / 204.2 g/mol
number of moles of KHP = 0.010 mol
Now we will find out the volume of NaOH
volume = number of moles / molarity
volume of NaOH = 0.010 mol / 0.30 M
volume of NaOH = 0.033 L
Conver L to ml
volume of NaOH = 0.33 L * 1000
volume of NaOH = 33.0 ml
You can also learn about molarity from the following question:
https://brainly.com/question/8732513
#SPJ4
when energy-depleted elements associated with a proton are accepted by an organic molecule, the process is called
When energy depleted elements associated with a proton are accepted by an organic molecule the process is called Fermentation.
Fermentation is a metabolic process that causes a chemical change inside body by the actions of enzymes.
The main purpose of fermentation is to generate NAD+ and 32 ATP in the presence of oxygen.
Fermentation allows cells to survive without using ATP.
To know more about Fermentation click here:
https://brainly.com/question/13253029
#SPJ4
a 125 g sample of lead at 85.0 c and a 320 g sample of silver at 34.0 c are added to 0.500 kg of water at room temperature (22.0 c) in an insulated container. assuming the system is thermally insulated, what is the final equilibrium temperature?
The final equilibrium temperature of the mixture of lead, silver, and water is 24.65°C. The result is obtained by using the Black's Principle.
What is Black's Principle?The Black's Principle states that heat released by a higher-temperature object is equal to the heat absorbed by a lower-temperature object. It can be expressed as
Q release = Q absorbs
Where
Q release is the heat released by high-temperature objects.Q absorb is the heat absorbed by low-temperature objects.The mass of lead is 125 g at 85°C, the mass of silver is 320 g at 34°C, and the mass of water is 0.5 kg at 22°C. All of them are mixed, so that the temperature of the lead and silver will fall and otherwise the temperature of water will rise.
The equation of the heat energy with the temperature change is
Q = m × c × ΔT
Where
m = massc = specific heat capacityΔT = change in temperatureThe data shows that:
c lead = 128 J/kg °Cc silver = 234 J/kg °Cc water = 4,186 J/kg °CThe equilibrium temperature is
Q release = Q absorbs
(m × c × ΔT)lead + (m × c × ΔT)silver = (m × c × ΔT)water
(0.125 × 128 × (85-T)) + (0.320 × 234 × (34-T)) = (0.500 × 4,186 × (T-22))
(16 × (85-T)) + (74.88 × (34-T)) = (2,100 × (T-22))
1,360 - 16T + 2,545.92 - 74.88T = 46,200 - 2,100T
2,190.88T = 50,105.92
T = 24.65°C
Hence, the final equilibrium temperature of the mixture is 24.65°C.
Learn more about Black's Principle here:
https://brainly.com/question/29217490
#SPJ4
given that the principal quantum number is n, the number of orbitals in each principal energy level is given by the expression .
The formula 2n², where n is the primary energy level, can be used to calculate the maximum amount of electrons in each energy level (first quantum number).
Where are the orbitals?The nucleus is the center of the orbits. One orbital will be larger than the others if an atom has several orbitals, or they will overlap. Additionally, an atom is perhaps most likely to occur in the electron shells. Orbitals, or groups of electrons arranged in a cloudlike pattern, surround the nucleus.
What shape do orbitals take?The highest level of probability for an electron to exist is in an atom's nucleus. The route that electrons travel while navigating the restrictions of the circle is referred to as a subshell. There are four different subshell classifications. The letters s, p, d, & f are used to identify the such.
To know more about Orbitals visit:
https://brainly.com/question/18914648
#SPJ4
How is the bent geometry related to the trigonal planar geometry?
They are related through the trigonal planar being the electron geometry and bent is the molecular geometry for an element that has two bonds and one lone pair.
What is Geometry?This is referred to as the study of different types of shapes, figures and sizes and is used in various fields such as mathematics, chemistry etc.
In the field of chemistry, there are different types such as trigonal planar and the bent geometry which are related as a result of some shared characteristics which include the following in the subsequent paragraph.
They are related through the trigonal planar being the electron geometry and bent is the molecular geometry for an element that has two bonds and one lone pair and is therefore the correct choice in this scenario.
Read more about Geometry here https://brainly.com/question/28225420
#SPJ1
For a certain farming community in California, a water shortage is predicted if the average global temperature rises by 1 degree Celsius. The residents of this community rely on private vehicles powered by fuels for transportation because there is no public transportation system. Farm vehicles powered by diesel fuel are used to harvest crops and get them to market. Residents of the farming community want to reduce their impact on global temperature increases by reducing their carbon dioxide emissions. Residents of the farming community want to reduce their impact on global temperature increases by reducing their carbon dioxide emissions.
Choose the answers below that are true in regards to this scenario.
Question 2 options:
Residents of this community drive personal fuel-powered vehicles.
Farmers in this community use diesel-powered farm vehicles.
Residents in this community are NOT concerned about reducing their CO2 emissions.
The answers that are true in regards to the scenario above is:
Residents of this community drive personal fuel-powered vehicles.Farmers in this community use diesel-powered farm vehicles.So, the first and second options are correct. The third and last option is incorrect.
What is a community?A community is described as a social unit with commonality such as place, norms, religion, values, customs, or identity.
From the scenario above, we can conclude the following:
residents of the farming community want to reduce their impact on global temperature increases by reducing their carbon dioxide emissions. Residents of this community drive personal fuel-powered vehicles.Farmers in this community use diesel-powered farm vehicles.Learn more about vehicles at: https://brainly.com/question/26006107
#SPJ1
A block and tackle is a rope and pulley system that uses multiple pulleys. It multiplies a small force into a large one. If a motor has a weight of about 2500 N and people pull 4.0 m of rope with a force of 700 N to raise the motor 1.0 m, how efficient is the block and tackle?
The efficiency of the machine is obtained as 89.3%.
What is a pulley?A pulley is one of the types of simple machine. We know that a simple machine has to do with anything that helps you to be able to do your work more efficiently.
We know that the efficiency has to do with how well the pulley is able to do work as we know. In this case we know that the efficiency is obtained from;
Work output/Work input * 100/1
Work output =2500 N * 1.0 m = 2500 J
Work in put = 700 N * 4 m= 2800 J
Efficiency = 2500 J/2800 * 100/1
= 89.3%
Learn more about machine efficiency:https://brainly.com/question/11752408
#SPJ1
by using photons of specific wavelengths, chemists can dissociate gaseous hi to produce h atoms with certain speeds. when hi dissociates, the h atoms move away rapidly, whereas the heavier i atoms move more slowly. if a photon of 248 nm is used, what is the excess energy (in j) over that needed for dissociation? enter your answer in scientific notation.
The excess energy needed for the dissociation of the HI atom is 3.102 x 10⁻¹⁹ J
The wavelength of the photons used to dissociate the HI molecule is 248 nm.
The energy of the photon is given by,
E = hc/λ
Where,
H is Planck's constant,
c is the speed of light,
λ is the wavelength of the photon,
Putting values,
E = 6.62 x 10⁻³⁴ 3 x 10⁸/248 x 10⁻⁹
E = 8 x 10⁻¹⁹ J.
The bond energy required to dissociate the HI atom is 4.898 x 10⁻¹⁹ Joules.
The excess energy is given by,
E = 8 x 10⁻¹⁹ - 4.898 x 10⁻¹⁹
E = 3.102 x 10⁻¹⁹ J.
so, the excess energy needed is 3.102 x 10⁻¹⁹ J.
To know more about Bond energy, visit,
https://brainly.com/question/14867588
#SPJ4
The distance of a doorknob from the floor is about 1
The ideal distance between a doorknob and the the ground floor is 34 inches.
How far should a doorknob and floor?In a lay man language, a doorknob simply refers to the handle which is usually used to hold doors in order to open or close the door. Every door of a building regardless of its size or location in the building must have a knob to always hold it with .
However, from the task given above, a doorknob should be at least 34 inches from the floor under normal circumstances.
In conclusion, it can be deduced from the simple explanation above that a doorknob should be ideally 34 inches from the floor of the house or building.
Complete question:
What should be the ideal distance between the doorknob from the floor?
Read more about doorknobs:
https://brainly.com/question/10041400
#SPJ1
a 1.00 l solution contains 24.52 g of nitrous acid, hno2. what mass of sodium nitrite, nano2, should be added to it to make a buffer with a ph of 3.46? ka (hno2)
26.21g NaNO₂ is added to it to make a buffer with a pH of 3.46.
Describe buffer solution.A buffer solution's pH will not change when a small amount of an acid or an alkali is added.
A buffer solution that is acidic has a pH lower than 7, to put it simply. Acidic buffer solutions are usually made by mixing a weak acid with one of its salts, usually sodium salt.
A buffer solution with an alkaline pH exceeds 7. Alkaline buffer solutions are often made by mixing a weak base with one of its salts.
moles of HNO₂ = 24.52g HNO₂ ×[tex]\frac{1 mol HNO2}{47.013gHNO2}[/tex]
moles of HNO₂ = 0.33 moles HNO₂
pKa for HNO₂,
pKa = -log(Ka)
pKa = -log(4.0 × 10⁻⁴)
pKa = 3.39
Now, By using the Henderson-Hasselbach equation: determine the moles of NaNO₂.
Hence, both compounds (Weak base and acid) have same volume.
also use moles instead of concentrations:
pH = pKa + log ( [tex]\frac{moles NaNO2}{moles HNO2}[/tex])
moles of NaNO₂ = moles of HNO₂ × 10[tex]^{pH-pKa}[/tex]
moles of NaNO₂ = 0.33 moles × 10³°4⁶⁻³°³⁹
moles of NaNO₂ = 0.38 moles
moles of NaNO₂ to grams of NaNO₂,
= 0.38 × (68.99/1)
= 26.21g NaNO₂
amount of NaNO₂ is 26.21g.
To know more about buffer solution, visit:
https://brainly.com/question/24262133
#SPJ4
When a chlorine atom reacts weith a sodium atom to form an ion, the chlorine atom will
Select one:
a.
gain one electron
b.
gain two electons
c.
lose two electrons
d.
lose one electon
Answer:
each chlorine atom will lose one electron
24. what is the relationship between the number of bonds between two atoms and bond strength? bond length?
The strength of the bond describes how closely each atom is connected to another atom and how much energy is required to break that connection. The bond length is the average distance between the two atomic nuclei of two molecules that are joined together.
Define bond strength:The strength of the bond indicates how strongly each atom is bound to another and how much energy is expended in doing so. The force that a chemical bond utilizes to hold two atoms together is known as bond strength. The amount of energy required to break the bond is expressed in terms of the kilocalories per mole.
Define bond length:The equilibrium separation between the nuclei of two bound atoms in a molecule is referred to as the bond length. The bond length increases with increasing atom size. Bond multiplicity cause decrease in bond length. Rotational spectroscopy, X-ray diffraction, and other methods are used to measure it.
To know more about bond length and bond strength, visit:
https://brainly.com/question/16184386
#SPJ4
Without stratospheric ozone (o3), harmful solar radiation would cause gene alterations. ozone forms when the bond in o2 breaks and each o atom reacts with another o2 molecule. it is destroyed by reaction with cl atoms formed when the c―cl bond in synthetic chemicals breaks. find the wavelengths of light that can break the c―cl bond and the bond in o2. give your answers in scientific notation.
The wavelengths of light that can break the Cl-Cl bond and the bond in O₂ will be λ = 3.53 × 10⁻⁷ m and λ =2.4 × 10⁻⁷ m respectively.
Cl-Cl- Bond energy (E)= 339 KJ/mol
O=O Bond energy (E)= 498 KJ/mol
h = 6.626 × 10⁻³⁴ J.s
c = 3 × 10⁸ m/s
N = 6.02214076 × 10²³
For Cl-Cl bond
We will use the following formulae
λ = Nhc/E (for one mol photons)
Put the values
λ = [(6.02214076 × 10²³ p/mol)(6.626 × 10⁻³⁴ J.s)(3 × 10⁸ m/s) / (339 × 10³ J/mol)] × 1 nm / 10⁻⁹ m
λ = 353 nm
λ = 3.53 × 10⁻⁷ m
For O=O bond
We will use the following formulae
λ = Nhc/E (for one mol photons)
Put the values
λ = [(6.02214076 × 10²³ p/mol)(6.626 × 10⁻³⁴ J.s)(3 × 10⁸ m/s) / (498 × 10³ J/mol)] × 1 nm / 10⁻⁹ m
λ = 240 nm
λ = 2.40 × 10⁻⁷ m
You can also learn about wavelengths from the following question:
https://brainly.com/question/13533093
#SPJ4
the compound ccl4 contains question 16 options: a) nonpolar covalent bonds. b) polar covalent bonds, with partial negative charges on the cl atoms. c) ionic bonds. d) polar covalent bonds, with partial negative charges on the c atoms.
The compound [tex]CCl_{4}[/tex] contains polar covalent bonds having partial negative charges on the Cl atoms.
So, the correct option is B.
The four polar covalent bonds between carbon and chlorine in carbon tetrachloride ( [tex]CCl_{4}[/tex]) give it its name as a covalent compound. Due to the variation in atoms' values of electronegativity, the bonds in this compound are polar. The molecule is asymmetrical, which means that the opposing opposite forces balance each other out, and as a result, the molecule is not polar.
The four bonds have symmetry and are spread out in four different directions. In each order, the dipole moments are thus canceled out. Tetrachlorocarbon is a non-polar molecule as a result. Although the electronegativities of C and Cl are different, the carbon tetrachloride molecule has no dipole moment.
Learn to know more about Covalent bonds on
https://brainly.com/question/3447218
#SPJ4
I need this answer somebody Please help me
The correct responses that describe the various rules in the filling of orbitals are;
1) Aufbau principle
2) Pauli exclusion principle
3) Hund's rule.
What is the orbital?The orbital has to do with the region in space where there is a high probability of finding the electron. We have to know that that looking at the orbitals, we can know how electrons are arranged in the atoms in order of increasing energy.
The Aufbau principle shows us that when we try to fill the electrons into orbitals, we must start from the orbital that has the lowest energy. The Pauli exclusion principle states that no two electrons in an atom can have the same value for all the four quantum numbers. In other words, electrons in the same orbital must have anti parallel spins.
Also, when we are filling electrons into orbitals that have the same energy, we fill them in singly first. This is the statement of the Hund's rule.
Learn more about orbitals:https://brainly.com/question/18914648
#SPJ1
Please help with the question!
Subtract the initial mass from final mass, i.e., vm.
a 20 ml sample of gastric juice (composed of strong acid) was titrated with 0.0011 m aqueous naoh. the addition of 6.7 ml of naoh resulted in a neutral ph. what was the original ph of the gastric juice sample?
The original pH of the gastric juice sample is 3.43
What is pH ?pH serves as a measure to calculate the acidity/alkalinity of a solution. It's ranges is between 0 - 14, with 7 being neutral. A pH below 7 indicates acidity and a pH above 7 indicates basicity. pH is actually a measure of the relative amounts of free hydrogen and hydroxyl ions in water.
As we know:
M₁V₁ = M₂V₂
For the given question:
M₁ = Concentration of gastric juice
V₁ = Volume of gastric juice (20 ml)
M₂ = Concentration of NaOH (0.0011 M)
V₂ = Volume of NaOH (6.7 ml)
So, M₁ = M₂V₂ / V₁
M₁ = 0.0011 × 6.7/20
M₁ = 0.000365
For pH:
pH = -log [H⁺]
pH = -log [0.000365]
pH = 3.43
To know more about pH visit:
https://brainly.com/question/2288405
#SPJ4
three naturally occurring isotopes of an element are shown in the models below. what do the isotopes have in common?
same number of protons but different numbers of neutrons.
Isotopes are members of a family of an element that all have the same number of protons but different numbers of neutrons.
Isotopes are atoms of the same element that have different numbers of neutrons but the same number of protons and electrons. The difference in the number of neutrons between the various isotopes of an element means that the various isotopes have different masses.
You can learn more about this at:
brainly.com/question/11680817#SPJ4
How many moles of H₂ do you need to produce 8 moles of NH3 if you have plenty of N₂? SHOW ALL WORK FOR THIS CALCULATION.
12 moles of H₂ need to produce 8 moles of NH3 if you have plenty of N₂ .
What is a chemical reaction ?
Chemical reaction, the process by which one or more substances (reactants) are transformed into one or more other substances (products). Substances are either chemical elements or compounds. Chemical reactions rearrange the constituent atoms of reactants to produce different substances as products.
Chemical reactions are part of technology, culture, life . Fuel combustion, glass and pottery making, beer , and wine and cheese making are few examples. Activities involving chemical reactions that have been around for thousands of years. Chemical reactions are abundant in a variety of complex processes occurring in the Earth's geology, atmosphere and oceans, and in all biological systems.
The balanced chemical equation is:
N2+3H2→2NH3
From stoichiometry,
2 mol of NH3
is produced from 3 mol of H2
8 mol of NH3 will be produced from = 3/2×8=12 mol of H2
To learn more about the chemical reaction , click the given link ;
https://brainly.com/question/14361631
#SPJ1
in the laboratory you dilute 4.90 ml of a concentrated 12.0 m hydrochloric acid solution to a total volume of 175 ml. what is the concentration of the dilute solution?
The diluted hydrochloric acid solution had a concentration of 0.3M
what is dilution?
Dilution is the application of a solvent that reduces the concentration of the solute with in solution. Concentration is the elimination of solvent, which raises the concentration of the solute in the solution.
The hydrochloric acid chemical formula is HCL,
if 1 liter of the HCL has 12mol, then 4.90ml or 0.0049 L of solution has 0.058 moles,
When the acid solution was diluted , we will get 175ml or 0.175 L
so as we dilute the solution we will have the change in the concentration and that is calculated
0.058/0.175=0.3314
=0.3M
So the concentration of the solution that is diluted was found to be 0.3M
To learn more about dilutions follow the given link: https://brainly.com/question/11493179
#SPJ4
a chemical equation that shows all reactants and products as intact, undissociated compounds is called a(n)
Answer: molecular equation
Explanation:
Put the following elements in order from smallest to largest atomic radius: Carbon, Oxygen, Tin, Strontium
The order of the elements from smallest to largest atomic radius are O<C<Sn<Sr.
What is the definition of an atom's atomic radius?Atomic radius is the separation between an atom's outer electron shell and nucleus. 1/2 the distance between identical atoms that are bound together by their nuclei. Positively charged ions known as cations are smaller than their neutral atom.
Therefore, The distance between the center of the nucleus and the biggest shell inhabited by the valence electron of a neutral element is known as the atomic radius, which is an attribute of atoms. This would rely on the atom's atomic number and the quantity of electrons it contains.
Learn more about atomic radius from
https://brainly.com/question/13126562
#SPJ1
how many ml of propyl alcohol are required to make a 9.17% (v/v) aqueous solution in a 250. ml volumetric flask?
2,726.28 mL solution of propyl alcohol is required to make a 9.17% (v/v) aqueous solution in a 250. ml.
A solution's volume-by-volume percent concentration,
9.17% v/v is a measure of how many milliliters of solute it contains in 100 mL of solution.
In this case,
9.17% v/v solution will contain -
9.17 mL of solute for every 100 mL of solution.
This means that in order to have propyl alcohol required to make a 9.17% (v/v) aqueous solution in 250 ml of solute, you need to have
250 mL solute× 100 mL solution/ 9.17mL solute
=2,726.28 mL solution.
Know more about Propyl Alcohol at:
https://brainly.com/question/12904410
#SPJ4
Which structure is the arrow pointing to?
What is the function of this organelle?
The structure the arrow is pointing to is the nucleus and it helps store genetic material (DNA) in living cells.
What is an organelle?Organelle is a specialized structure found inside cells that carries out a specific life process. examples are ribosomes, vacuoles, nucleus etc.
The nucleus is the large membrane-enclosed organelle found in eukaryotic cells which contains genetic material.
The nucleus is located at the center of living cells and it functions to store genetic material called DNA. The DNA is transferred to offsprings for inheritance of traits.
According to this question, a microscopic image of a cell is shown. The arrow pointed to the nucleus of the cell.
Learn more about nucleus at: https://brainly.com/question/4031640
#SPJ1
What is the wavelength of a radio wave having a frequency of 3.75 x 10^7 Hz?
The wavelength of a radio wave having a frequency is 0.8m.
Radio waves are the longest waves in the electromagnetic spectrum. These waves are a form of electromagnetic radiation with frequencies ranging from 300 GHz to 3 kHz, but above 3 GHz are defined as microwaves. Wave frequency is the number of waves passing through a fixed point in a given time.
calculation:-
frequency = 3.75 x 10^7 Hz?
f = wavelength / speed of light
wavelength = c/f
= 3 × 10^8 / 3.75 x 10^7 Hz
= 0.8 m.
Frequency is the rate at which the current changes direction per second. It is measured in hertz an international unit of measurement where one hertz equals one cycle per second. To calculate the frequency of a wave, divide the velocity of the wave by the wavelength. Write your answer in Hertz or Hz which is the unit for frequency. If you need to calculate the frequency from the time it takes to complete a wave cycle or T the frequency will be the inverse of the time or 1 divided by T.
Learn more about The wavelength here:- https://brainly.com/question/10728818
#SPJ1
sodium hydroxide (naoh) is a notably common strong base. it is used in household cleaning, drain clearing, tissue digestion, chemical pulping, and german pretzel production (which thankfully uses food grade sodium hydroxide, which is rare.) a. to prepare a solution for an important reaction, a scientist places 40 g of naoh in 2 l of water. what is the poh of this solution? what is the ph of this solution?
The pOH of this solution is 0.3 and the pH of the solution is 13.3 .
What is pH ?
The pH of a food is a direct function of the free hydrogen ions present in that food. Acids in food release free hydrogen ions. Hydrogen ions give acidic foods their characteristic sour taste. Therefore, pH can be defined as a measure of free acid. More specifically, pH is defined as the negative logarithm of hydrogen ion concentration. The pH range is 0 to 14. The pH of pure water is exactly 7, so pH 7 is neutral. Values less than 7 are acidic. Values above 7 are basic or basic.
Foods are generally classified as “acidic foods” (low pH, pH 4.6 or less) or “weakly acidic foods” (high pH, pH 4.6 or higher). Safe food storage is determined by the pH of the food. Acidic foods such as fruit and pickles can be safely canned in a tin can with a hot water bath. A combination of acid and hot water (212°F) destroys perishable organisms such as mold and yeast. Proper cooking water canning processes are important to prevent the growth of acid-tolerant molds and yeasts that can lead to elevated pH levels. The pH of borderline foods such as figs and tomatoes can easily exceed 4.6, so lemon juice or citric acid should be added before canning with boiling water. Low-acid foods such as vegetables and meat should be processed in a pressure preserver for safety.
To know about the pH , click the link given ;
https://brainly.com/question/26424076
#SPJ4
which of the following pairs of compounds could be separated by chemically active extraction? what reagents would you use? a. ch3ch2co2h and clch2ch2co2h b. phenol and alcohol c. nh and o
Option-(b) Phenol and alcohol could be separated by chemically active extraction.
In the chemically active extraction ,the compounds are treated with an acid or a base to alter their chemical structure. There are 3 types of chemical extraction. liquid-liquid, liquid-solid and acid base extraction. Acid-base extraction is known as a chemically active extraction.
A phenol is a weak acid.it can lose hydrogen ion when dissolved in water. alcohol is both acid and a base.it reacts with a strong base. The Oxygen atom makes alcohol a base. phenol and alcohol treated with DNA in the process of active extraction.
To learn more about Acid-base extraction please visit:
https://brainly.com/question/23638412
#SPJ4
standard light antarctic precipitation (slap) is a common reference material when making hydrogen isotope measurements. analysis of slap shows that it is 0.008917% 2h (mass 2.01410 amu) and the remainder is 1h (mass 1.00782 amu). what is the average mass of slap?
so we have to calculate the average mass of the SLAP
given,
percentage abundance of 2H= 0.008917%
mass of 2H= 2.01410 amu
mass of 1H= 1.00782 amu
now we calculate, the percentage abundance of 1H = 100% - 0.008917%
= 99.991%
the average mass of SLAP = percentage abundance of 1H x mass of 1H + percentage abundance of 2H x mass of 2H
= 99.991% x 1.00782 + 0.008917% x 2.01410
=(99.991x1.00782)/ 100 +( 0.008917)x2.01410/100
= 1.00773 + 0.000173
= 1.0079 amu
the average mass of SLAP is 1.0079 amu
learn more about amu here;
https://brainly.com/question/12309362
#SPJ4
given 5.86 moles of NaN3, how many moles of Na are produced?
When 5.86 moles of NaN3(Sodium Azide) is given then no. of moles of Na produced is 5.86 mol.
What is NaN3 (Sodium Azide)?The inorganic substance with the formula NaN3 is sodium azide. The gas-forming element in older automotive airbag systems is this colourless salt. It is utilised to make additional azide chemicals. It is an ionic chemical that is exceedingly water soluble and extremely dangerous.
What Na Describes?Na is the chemical formula used for the element having atomic number 11 and called as Sodium
Acc. to the given data following is the reaction occurring
2NaN3→2Na+3N2
Now to calculate the no. of moles of Na
Multiply the given moles of sodium azide(NaN3) by the mole ratio between NaN3 and N2 from the balanced equation, with Na in the numerator. 2 mol Na:3 mol N2
5.86 molNaN3×2mol Na/2mol NaN3=5.86 mol Na
Hence, when 5.86 moles of NaN3(Sodium Azide) is given then no. of moles of Na produced is 5.86 mol.
To know more about Sodium azide visit
https://brainly.com/question/21506930
#SPJ1
Sodium can combine with element "X" so that
the chemical formula is Na₂X. What element
could element "X" be?
A)Phosphorus
B)Helium
C)Magnesium
D)Sulfur
The element could be X is phosporus .
What is element?
An element is the fundamental item that can't be easily broken onto smaller of pieces. In chemistry and physics, an elementary is a substance that can't be broken down by non-nuclear reactions. In computing and the mathematics, an element is the distinct piece of a larger system or set.
Sol-An ionic compound is formed by the ions, which their charges replaced, so the compound Na₂X is formed by the ions Na⁺ and X⁻². Thus, X must gain two electrons to be stable at the octet, so it has 6 valence electrons. Because it can accommodate up to 12 electrons, the elememts expands the octet, do it must be in the 3rd period or higher.
To know more about elements click-
https://brainly.com/question/18096867
#SPJ1
* i need to make a 2.00 m solution of sodium hydroxide. i have a 11.9 m solution of naoh on the shelf. how many ml of the 11.9 m solution of naoh do i need to make 2 liters of the 2.00 m naoh solution?
336 ml of the 11.9 m solution of NaOH do i need to make 2 liters of the 2.00 m NaOH solution
What is Chemical reaction ?
Chemical reactions happen absolutely everywhere. While we sometimes associate chemical reactions with the sterile environment of test tubes and laboratories, nothing is farther from the truth. In fact, a vast number of transformations are creating a dizzying and almost incomprehensible series of new matter and energy changes in our world every second of every day. In nature, chemical reactions can be much more difficult to control and in some cases much more complex than in the laboratory, and generally occur whether you want it or not!In the woods A raging fire, the slow rusting process of iron over the years in the presence of oxygen and water, or the delicate ripening of fruit on a tree, the transformation of various chemicals, etc... (reactants ) into another group of substances (products) is a so-called chemical reaction.
use M1V1=M2V2
V1 = M2V2/M1 = 336 ml .
To learn more about Chemical reaction , click the link below ;
https://brainly.com/question/11231920
#SPJ4
