Final-term performance task no. 2 Volume of Solids 1. A hardwood rectangular hollow box with 10-inch height and 6-inch and 8-inch outer borders. The uniform thickness of the box is 1 in :
1. Wooden box: material used = 165 cubic inches, blocks that fit = 165
2. Water tank: volume of water = 120π cubic inches
3. Frustum: lateral area = 140 square meters, total surface area = 240 square meters, volume = 368π cubic inches
4. Hill: amount of earth removed = 220000 cubic meters
Here is the explanation :
1. a. The amount of material used is the difference between the outer volume and the inner volume. The outer volume is 6810 = 480 cubic inches. The inner volume is 579 = 315 cubic inches. The difference is 480-315 = 165 cubic inches.
b. The number of wooden blocks that will fit into the box is the volume of the box divided by the volume of a single block. The volume of the box is 165 cubic inches. The volume of a single block is 1 cubic inch. The number of blocks that will fit is [tex]\frac{165}{1}[/tex] = 165 blocks.
2. The volume of water in the tank is the volume of the cone times the fraction of the cone that is filled with water. The volume of the cone is [tex]\begin{equation}\frac{1}{3}\pi r^2 h = \frac{1}{3}\pi 6^2 12 = 288 \pi \text{ cubic inches}[/tex]. The fraction of the cone that is filled with water is [tex]\frac{5}{12}[/tex]. The volume of water in the tank is 288 pi * [tex]\frac{5}{12}[/tex] = 120 pi cubic inches.
3. a. The lateral area of the frustum is the area of the curved surface. The curved surface is made up of two triangles and a rectangle. The area of a triangle is ([tex]\frac{1}{2}[/tex])base height. The base of each triangle is 8 meters and the height is 10 meters. The area of each triangle is ([tex]\frac{1}{2}[/tex])810 = 40 square meters. The area of the rectangle is 610 = 60 square meters. The total area of the curved surface is 402 + 60 = 140 square meters.
b. The total surface area of the frustum is the area of the curved surface plus the area of the two bases. The area of the two bases is 8² = 64 square meters + 6² = 36 square meters = 100 square meters. The total surface area is 140 + 100 = 240 square meters.
c. The volume of the frustum is the volume of the whole pyramid minus the volume of the smaller pyramid. The volume of the whole pyramid is [tex]\begin{equation}\frac{1}{3}\pi r^2 h = \frac{1}{3}\pi 8^2 10 = 512 \pi \text{ cubic inches}[/tex]. The volume of the smaller pyramid is [tex]\begin{equation}\frac{1}{3}\pi(6^2)(10) = 144\pi \text{ cubic inches}[/tex]. The volume of the frustum is 512 pi - 144 pi = 368 pi cubic inches.
4. The amount of earth removed is the volume of the prismatoid. The volume of the prismatoid is the area of the lower base times the height plus the area of the right triangle times the height. The area of the lower base is 160100 = 16000 square meters. The area of the right triangle is ([tex]\frac{1}{2}[/tex])60200 = 6000 square meters. The height of the prismatoid is 10 meters. The volume of the prismatoid is 1600010 + 6000*10 = 220000 cubic meters.
To know more about the prismatoid refer here :
https://brainly.com/question/28192146#
#SPJ11
Complete question :
Performance Task 2 (Final term) Volume of Solids 1. A wooden rectangular hollow box has outer edges of 6 in and 8 in. and height of 10 in. The uniform thickness of the box is 1 in. a. Find the amount of the material used b. How many wooden blocks each cube with 1 in. edge will fit into the box? 2. A water tank is in the form of a right circular cone with a base radius 6 ft and a slant height of 12 ft. find the volume of the water when the tank is filled to a depth of 5 ft. 3. Consider a frustum of a regular pyramid. The upper base is a square of side equal to 6 meters while the lower base is also a square of side 8 meters and an altitude of 10 meters. Find the following: a. Lateral area b. Total surface area c. Volume 4. In a certain railroad landslide cleaning operation in Baguio there was a need to remove a portion of a hill which was in the shape of a prismatoid. The lower base is a rectangle and the upper base is a right triangle. GE | AB, EF AC and all face angles at E and A are right angles. The height of the solid is 10 m. find the amount of earth removed. 160 100 M G B 200 C 60
4. While at the beach one day, a physics students observes waves rolling up on the shore. She counts a total of 14 waves in a time of 20.0 seconds. What is the wave period? [2]
At the beach one day, a physics students observes waves rolling up on the shore. She counts a total of 14 waves in a time of 20.0 seconds. The wave period is approximately 1.43 seconds.
The wave period is the time it takes for one complete wave to pass a certain point. It is usually measured in seconds (s). To find the wave period, we can use the formula:
Wave period (T) = Total time (t) / Number of waves (n)
Given:
Total time (t) = 20.0 seconds
Number of waves (n) = 14 waves
Substituting the values into the formula:
Wave period (T) = 20.0 seconds / 14 waves
T ≈ 1.43 seconds
Therefore, the wave period is approximately 1.43 seconds.
To learn more about period visit: https://brainly.com/question/29813582
#SPJ11
how
can we solve this problem?
43K 43 Ca + e + V 43 K (1³ =) 43 Ca (1" = 2/2) The the allowed values of Al are:
The given nuclear reaction is: 43K(1³=)43Ca(1"=2/2) + e + v This nuclear reaction is a beta decay reaction. The atomic number of the daughter nucleus increases by one. A neutrino is produced in the process as well.
Beta decay is a radioactive decay process in which the beta particle is emitted from the nucleus. The nucleus emits a beta particle and a neutrino (antielectron) during beta decay.
The atomic number of the daughter nucleus is increased by one in this process, while the mass number remains constant. In this reaction, the parent nucleus, 43K, decays to form the daughter nucleus, 43Ca.The atomic number of the daughter nucleus is increased by one in this process, while the mass number remains constant.
The allowed values of Al are 0 and 1. In beta decay, a neutron in the nucleus is converted into a proton, and the beta particle is emitted from the nucleus.
To know more about nuclear reaction refer here:
https://brainly.com/question/13315150#
#SPJ11
As we move from left to right across the periodic table, what is the general trend?
A) Atomic radii increase.
B) Electronegativity decreases.
C) Nuclear shielding increases.
D) Metallic character decreases.
As we move from left to right across the periodic table, the general trend is that the atomic radii decrease and the electronegativity increases while the metallic character decreases and the nuclear shielding remains constant. The option d is correct
The periodic table is an organized arrangement of elements that are ordered according to the periodic law, which is a basic principle of chemistry. This principle explains that the chemical and physical properties of elements are periodic or repeated based on their atomic structure. The table has been designed to demonstrate the relationship between the chemical and physical properties of elements. It comprises 118 elements in total and is arranged in order of atomic number. Elements have been classified into groups based on their chemical and physical properties. Each group is identified by the number of valence electrons the element has, which plays a significant role in determining the element's behavior.
As we move from left to right across the periodic table, the trend is that the atomic radii decrease due to the increased nuclear charge that attracts the electrons more strongly to the nucleus. This decreases the size of the atom. Additionally, the electronegativity increases because the effective nuclear charge, which is the net charge an electron feels from the nucleus, increases. The metallic character of the element decreases as we move from left to right because the elements lose their metallic character and become non-metallic. Finally, nuclear shielding remains constant because it remains the same across a period. The option d is correct
To know more about periodic table visit:
https://brainly.com/question/28747247
#SPJ11
is pulled to the right by a constant force f0 . the blocks are moving to the right across a rough surface and approach point p , where the rough surface transitions to a surface with negligible friction. how does the tension, t , in the rope connecting the blocks change, if at all, as block a passes point p ?
The tension, t, in the rope connecting the blocks will change as block A passes point P.
The tension, t, in the rope connecting the blocks in the given scenario, as block a passes point P, changes. It can be explained in detail as follows:
When the block A approaches point P, where the rough surface transitions to a surface with negligible friction, it will experience an acceleration. This acceleration will be greater than the acceleration of block B since it will have no frictional force holding it back.
Block B will still be subject to friction from the rough surface, which means it will have less acceleration. Due to the acceleration difference between block A and block B, the tension in the rope connecting them will decrease because block A will be ahead of block B and the slack in the rope will increase.
The tension, t, in the rope connecting the blocks will change as block A passes point P.
learn more about acceleration here
https://brainly.com/question/605631
#SPJ11
A large galaxy contains mostly old Population II stars spread smoothly throughout its volume, but it has little dust or gas. What type of galaxy is it most likely to be?
(a) Spiral.
(b) Barred Spiral.
(c) Irregular.
(d) Elliptical
A large galaxy that contains mostly old Population II stars spread smoothly throughout its volume, but has little dust or gas is most likely to be an Elliptical galaxy. There are three main types of galaxies, including the following: Spiral galaxies, Elliptical galaxies, and Irregular galaxies.
An elliptical galaxy is a galaxy that has an ellipsoidal shape and is flattened like an egg. The stars in this type of galaxy are distributed evenly in a three-dimensional elliptical shape that has a definite volume. It is also referred to as a smooth galaxy since it has no recognizable structure, dust, or gas. Elliptical galaxies are characterized by a smooth, featureless distribution of stars that are often arranged around the centre. These galaxies contain mostly old stars and contain little gas or dust.
Learn more about Elliptical galaxy here ;
https://brainly.com/question/6983391
#SPJ11
The most likely type of
galaxy
with mostly old Population II stars spread smoothly throughout its volume but little dust or gas is an
elliptical
galaxy.
Elliptical galaxies
are characterized by their smooth, featureless appearance and lack of prominent dust lanes or spiral arms. They are composed primarily of old stars, particularly Population II stars, which are typically metal-poor and formed early in the galaxy's history. The absence of significant amounts of dust and gas in the galaxy indicates that there is little ongoing star formation or
interstellar medium
present.
Spiral galaxies
, on the other hand, have a more structured appearance with distinct spiral arms and a central bulge. They contain a mix of young and old stars, as well as substantial amounts of gas and dust, which fuel ongoing star formation.
Barred spiral galaxies
share similar characteristics to spiral galaxies but have a central bar-shaped structure.
rregular galaxies are characterized by their irregular shape and lack of any defined structure. They often have ongoing star formation and contain significant amounts of dust and gas.
Learn more about
spiral galaxies
here:
https://brainly.com/question/6983391
#SPJ11
Question 12 A ray of light is incident on a square slab of transparent plastic in air. It strikes the centre of one side at an angle of 55°. A Part A Find the minimum refractive index of the plastic
The minimum refractive index of the plastic is approximately 0.8195.
The minimum refractive index of the plastic can be determined using Snell's law, which relates the angles of incidence and refraction for light passing through the boundary between two media. Snell's law is given by:
n1 * sinθ1 = n2 * sinθ2
Where:
n1 is the refractive index of the first medium (in this case, air)
theta1 is the angle of incidence
n2 is the refractive index of the second medium (plastic)
theta2 is the angle of refraction
In this case, the light is incident on the plastic slab from air, and the angle of incidence (theta1) is given as 55°. Since the ray of light strikes the center of one side of the square slab, it is normal to that side, meaning the angle of refraction (theta2) is 90°.
We can rewrite Snell's law for this scenario as:
n1 * sin(55°) = n2 * sin(90°)
Since sin(90°) is equal to 1, the equation simplifies to:
n1 * sin(55°) = n2
The refractive index of air (n1) is approximately 1.0003.
Now we can calculate the minimum refractive index of the plastic (n2):
n2 = n1 * sin(55°)
n2 = 1.0003 * sin(55°)
n2 ≈ 1.0003 * 0.8192
n2 ≈ 0.8195
Therefore, the minimum refractive index of the plastic is approximately 0.8195.
In conclusion, the minimum refractive index of the plastic is 0.8195.
To know more about refractive visit:
https://brainly.com/question/83184
#SPJ11
Which of the following laws/equations give a
WRONG description of Thermal
radiation? A.
Planck's blackbody radiation law
B.
The Rayleigh-Jeans formula
C.
The Stefan-Boltzmann law
D.
Wien'
The Rayleigh-Jeans formula give a wrong description of Thermal radiation. Option (C) is correct.
The Rayleigh-Jeans formula and Wien's displacement law are two of the most important formulas in electromagnetic radiation that describe the spectral distribution of blackbody radiation.
The Rayleigh-Jeans formula predicts that the spectral radiance of a blackbody is directly proportional to the frequency of the radiation and the temperature of the blackbody. The formula is given by:Lλ(T) = (2ckT/λ^4), where Lλ(T) is the spectral radiance of a blackbody at a temperature T, λ is the wavelength of the radiation, c is the speed of light, and k is the Boltzmann constant.
Wien's displacement law is an equation that relates the peak wavelength λmax of the spectral radiance of a blackbody to its temperature T. It states that the product of λmax and T is a constant, given by the Wien displacement constant b:λmaxT = b, where b = 2.898 × 10^−3 m·K.
Electromagnetic radiation is an electric and attractive unsettling influence going through space at the speed of light (2.998 × 108 m/s). Quanta of radiant energy, also known as photons, carry it around without any mass or charge.
Know more about Rayleigh-Jeans formula, here:
https://brainly.com/question/31262287
#SPJ11
A star is approximately a blackbody. Use Stefan-Boltzmann's law to calculate the power output of a star that has a radius of 695 million meters and a surface temperature of 5778 K. (Please note that l
A star is approximately a blackbody. Using Stefan-Boltzmann's law, the power output of the star is approximately [tex]1.25 x 10^2^7[/tex]watts.
The power output of a star can be calculated using Stefan-Boltzmann's law, which relates the power emitted by a black body to its temperature and surface area. To calculate the power output, we'll use the given values of the star's radius and surface temperature.
First, let's convert the radius of the star to meters. The given radius is 695 million meters, which is equivalent to 6.95 x [tex]10^8[/tex] meters.
Next, we'll calculate the surface area of the star using the formula for the surface area of a sphere. The surface area (A) is given by A = 4π[tex]r^2[/tex], where r is the radius of the star.
A = 4π(6.95 x [tex]10^8)^2[/tex]
Calculating the value of A:
A ≈ 4 * 3.14159 * (6.95 x [tex]10^8)^2[/tex]
A ≈ 4 * 3.14159 * 4.82 x [tex]10^1^7[/tex]
A ≈ 7.28 x [tex]10^1^8[/tex] square meters
Now, let's convert the surface temperature of the star to Kelvin. The given surface temperature is 5778 K.
We can now calculate the power output (P) using Stefan-Boltzmann's law. The formula is P = σA[tex]T^4[/tex], where σ is the Stefan-Boltzmann constant (approximately 5.67 x [tex]10^-^8[/tex] [tex]W/m^2K^4[/tex]).
P = (5.67 x [tex]10^-^8[/tex]) * (7.28 x [tex]10^1^8)[/tex] * ([tex]5778^4[/tex])
Calculating the value of P:
P ≈ (5.67 x[tex]10^-^8[/tex]) * ([tex]7.28 x 10^1^8[/tex]) * ([tex]3.394 x 10^1^6[/tex])
P ≈ [tex]1.25 x 10^2^7[/tex] watts
For more such information on: power
https://brainly.com/question/11569624
#SPJ8
A hypothetical metal alloy has a grain diameter of 2. 4 × 10−2 mm. After a heat treatment at 575°C for 500 min, the grain diameter has increased to 4. 1 × 10−2 mm. Compute the time required for a specimen of this same material (i. E. , d0 = 2. 4 × 10−2 mm) to achieve a grain diameter of 5. 5 × 10−2 mm while being heated at 575°C. Assume the n grain diameter exponent has a value of 2. 2
Answer:
Explanation: To compute the time required for the specimen to reap a grain diameter of five.Five × 10^(-2) mm at the same time as being heated at 575°C, we are able to use the grain increase equation:
(d2/d1) = exp(k*t)
where d2 is the very last grain diameter (5. Five × 10^(-2) mm), d1 is the initial grain diameter (2.4 × 10^(-2) mm), ok is the fee consistent, and t is the time.
First, we want to discover the charge constant, k? We can use the given information approximately the warmth treatment to calculate it:
(d2/d1) = (four.1 × 10^(-2) mm) / (2.4 × 10^(-2) mm) = 1.708
exp(k*t) = 1.708
Using the exponent property of logarithms, we can rewrite this equation as:
okay*t = ln(1.708)
Now, we can calculate the cost of k*t:
k*t = ln(1.708)
t = ln(1.708) / k
To find the time required for the specimen to gain a grain diameter of 5.5 × 10^(-2) mm, we want to replacement the fee of k from the given facts:
k = n * (d1^(-n))
ok = 2.2 * (2.Four × 10^(-2) mm)^(-2.2)
Now, we can replace the price of ok into the equation to find t:
t = ln(1.708) / k
Calculate the fee of ok and then alternative it into the equation to decide the time required for the specimen to gain the favored grain diameter of five.Five × 10^(-2) mm.
A car accelerates at a constant rate of 1. 83m/s^2 along a flat straight road. The force acting on the car is 1870N. Calculate the mass of the car
The mass of the car is calculated as 1021.86 kg. We can calculate the mass of the car by using the formula: mass = Force / acceleration
Given information: Acceleration of the car = 1.83 m/s²
Force acting on the car = 1870 N
We know that Force = mass × acceleration
According to the question, we need to find the mass of the car. We can calculate the mass of the car by using the formula: mass = Force / acceleration
Putting the values in the above equation, we get mass = 1870 N / 1.83 m/s²
So, the mass of the car is: mass = 1021.86 kg
Therefore, the mass of the car is 1021.86 kg.
To know more about mass, refer
https://brainly.com/question/86444
#SPJ11
In looking at the below mode values, each with n>1 use the spread in the measured max and min sustainable frequencies for each resonance and report the average frequency with the uncertainity for each of these higher order modes. Likewise calculate the fundamental frequency for each of these two modes.
n=2 max: 33.6 min: 33.3
n=3 max:48.9 mine: 47.7
For the given mode values with n > 1, we will calculate the average frequency and uncertainty for each resonance based on the spread in the measured maximum and minimum sustainable frequencies are 33.3 Hz and 47.7 Hz.
For n = 2, the maximum sustainable frequency is 33.6 Hz, and the minimum sustainable frequency is 33.3 Hz. To calculate the average frequency, we take the average of these two values: (33.6 Hz + 33.3 Hz) / 2 = 33.45 Hz. The uncertainty is obtained by taking half of the difference between the maximum and minimum frequencies: (33.6 Hz - 33.3 Hz) / 2 = 0.15 Hz. Therefore, the average frequency for n = 2 mode is 33.45 Hz with an uncertainty of ±0.15 Hz. The fundamental frequency for this mode would be the minimum sustainable frequency, which is 33.3 Hz.
For n = 3, the maximum sustainable frequency is 48.9 Hz, and the minimum sustainable frequency is 47.7 Hz. Following the same procedure, the average frequency is (48.9 Hz + 47.7 Hz) / 2 = 48.3 Hz, and the uncertainty is (48.9 Hz - 47.7 Hz) / 2 = 0.6 Hz. Therefore, the average frequency for n = 3 mode is 48.3 Hz with an uncertainty of ±0.6 Hz. The fundamental frequency for this mode is 47.7 Hz.
Learn more about frequency here
https://brainly.com/question/31871494
#SPJ11
A 20 kg object has 500 J of potential energy. How far off the ground is this object?
The object is approximately 2.55 meters off the ground.
To determine the height of the objectUtilizing the gravitational potential energy formula
Mass times gravitational acceleration times height equals potential energy
In this instance, the object has a mass of 20 kg and a potential energy of 500 J. On Earth, the gravitational acceleration is roughly 9.8 m/s².
Rearranging the formula, we can solve for the height:
height = Potential Energy / (mass * gravitational acceleration)
Substituting the values into the equation:
height = 500 J / (20 kg * 9.8 m/s²)
height ≈ 2.55 meters
Therefore, the object is approximately 2.55 meters off the ground.
Learn more about gravitational potential energy here : brainly.com/question/3120930
#SPJ1
5. The East Campus Provost decides to order a new rope for the flagpole. To find out what length of rope is needed, the provost observes that the pole casts a shadow 14.6 meters long. The angle the su
The length of the rope required for the flagpole is approximately 16.8 meters.
Let 'l' be the length of the rope required for the flagpole, 'h' be the height of the flagpole, and 'θ' be the angle between the flagpole and the ground. It is given that the shadow cast by the flagpole is 14.6 meters long. Hence, using trigonometry, we get:tan θ = h/ltan θ = (14.6/l)l = 14.6/tan θHere, θ = 55° (approx). Hence,l = 14.6/tan 55°= 16.8 meters (approx).Therefore, the length of the rope required for the flagpole is approximately 16.8 meters. The angle that the sun makes with the ground is 35 degrees since it is given that the pole casts a shadow 14.6 meters long.
Distance is measured in length. A quantity with the dimension distance is length in the International System of Units of Measurement. The majority of measurement systems have a base unit for length from which all other units are derived. The meter is the base unit for length in the International System of Units (SI).
Know more about length, here:
https://brainly.com/question/32060888
#SPJ11
1.
(a) What are the period and amplitude of the function f(x) = sin(x)?
(b) What are the period and amplitude of the function g(x) = 5 sin(3x)?
(c)What are he period and amplitude of the function h(x) = 2 sin(x)?
2. A point starts at the point (3,0) on a circle centered at the origin and travels counter clockwise at a constant angular speed of 2 radians per second. Let t represent the number of seconds since the point started moving.
(a) Write an expression in terms of t to represent the number of radians the point has swept out since the point started moving.
(b)Write a formula that expresses the x-coordinate of the point in terms of the number of seconds t since the point started moving.
(c) Write a formula that expresses the y-coordinate of the point in terms of the number of seconds t since the point started moving.
(a) Period of the function f(x) = sin(x):`2π`. The amplitude of the function f(x) = sin(x) is 1.
(b) Period of the function g(x) = 5 sin(3x): `(2π)/3`. The amplitude of the function g(x) = 5.
(c) Period of the function h(x) = 2 sin(x): `2π`. The amplitude of the function h(x) = 2. 2.
(a) Expression in terms of t to represent the number of radians the point has swept out since the point started moving is `2tπ`.
(b) The formula that expresses the x-coordinate of the point in terms of the number of seconds t since the point started moving is `x = r cos(2tπ/T)` where r is the radius of the circle, and T is the period of rotation which is `2π/2π=1`second.
Substituting the given values: `x = 3 cos(2tπ)`.
(c) The formula that expresses the y-coordinate of the point in terms of the number of seconds t since the point started moving is `y = r sin(2tπ/T)` where r is the radius of the circle, and T is the period of rotation which is `2π/2π=1`second.
Substituting the given values: `y = 3 sin(2tπ)`.
The period and amplitude of the functions f(x), g(x), and h(x) are given as:(a) Period of f(x) = sin(x): 2π, amplitude = 1 Period of g(x) = 5sin(3x): `(2π)/3`, amplitude = 5Period of h(x) = 2sin(x): 2π, amplitude = 2 (b) The x-coordinate of the point in terms of t is x = 3 cos(2tπ). (c) The y-coordinate of the point in terms of t is y = 3 sin(2tπ).
Learn more about amplitude
brainly.com/question/9525052
#SPJ11
i.box-1-100w-1/2hrs find the kwh
Answer:
The box-1-100w-1/2hrs consumed 0.05 kWh of energy
Explanation:
Power rating of the box = 100 W
Time of operation = 1/2 h
To calculate the energy consumption in kilowatt-hours (kWh):
Energy consumption (kWh) = (Power rating * Time of operation) / 1000
Putting the given values in the equation:
Energy consumption = (100W * 1/2h) / 1000
Energy consumption = 0.05 kWh
Therefore, the box-1-100w-1/2hrs consumed 0.05 kWh of energy.
To learn more about energy consumption:
https://brainly.in/question/2930600
Answer the following question about expanding Universe.
1. Describe the mechanism of a Type 1a supernova, explain how these have been used to
construct a "Hubble diagram" that extends to large redshifts, and describe what we learn
from it. [5 marks]
2. Does our understanding of the expanding Universe imply that some objects are receding
from us faster than the speed of light? Explain your answer. [3 points]
3. Describe the likely long-term fate of the Milky Way galaxy. [2 marks]
Answer:
2. no. the long - term fate of the Milky way galaxy is subject to the ongoing scientific study, but a number of predictions have been. the most significant of all the predictions is the collision of the Milky way and the Andromeda galaxy in about 4 to 5 billion year, leading to formation of a new large galaxy called Milkomeda. with time the Milky way will undergo stellar evolution, where stars will use up their nuclear energy and change into different stages. the galaxy will also record an increase in the quantity of black holes as well as black holes at it's center. interactions with small galaxies may lead to mergers and growth through a process called Galactic cannibalism. there are uncertainties about the influence of dark matter and it's energy on the-long- term fate of the Milky way.
our understanding will evolve with regards to new scientific discoveries.
3. the universe is expanding , but then this expansion does not have a finite speed or rather in other words it doesn't have any speed. the speed per- unit- distance of this expansion is equivalent to a frequency or an inverse of time. which implies that objects in the universe move at or below the speed of light but not exceeding the speed of light as the speed of light is considered the ultimate speed limit for bodies or objects moving in the universe.
Explanation:
the liquid portion called melt, the solid portion which consists of fragments of formed igneous rock, and the gaseous portion called volatiles
Magma is a combination of three things: the liquid portion called melt, the solid portion which consists of fragments of formed igneous rock, and the gaseous portion called volatiles. Magma is also classified as either mafic or felsic. Mafic magma has low viscosity, high temperature, and low gas content.
The terms that should be included in the answer are "melt," "solid portion," and "volatiles."Magma is a molten rock material that is found beneath the Earth's surface. On the other hand, felsic magma has high viscosity, low temperature, and high gas content. Magma is responsible for the creation of igneous rocks through the process of crystallization. When magma cools and solidifies, it forms solid rocks called igneous rocks. The type of igneous rock that forms depends on the type of magma and the rate of cooling.
Learn more about Magma here ;
https://brainly.com/question/12702338
#SPJ11
Igneous rocks consist of three main components: melt (liquid portion), solid fragments of formed igneous rock, and volatiles (gaseous portion).
Igneous rocks are formed from the solidification of molten rock material, known as magma. Magma is composed of three main components: melt, solid fragments, and volatiles.
The melt refers to the liquid portion of the magma. It consists of molten minerals and elements that are in a liquid state due to the high temperatures beneath the Earth's surface.
The solid portion of igneous rocks consists of fragments of previously formed igneous rocks. These fragments are often referred to as phenocrysts or xenoliths. Phenocrysts are larger crystals that grow within the magma before it solidifies, while xenoliths are foreign rock fragments that get incorporated into the magma as it rises towards the surface.
Volatiles are the gaseous components found within magma. They include gases such as water vapor ([tex]H_{2} O[/tex]), carbon dioxide ([tex]CO_{2}[/tex]), sulfur dioxide ([tex]SO_{2}[/tex]), and various other gases. Volatiles are released from the magma during volcanic eruptions and contribute to the explosive nature of some volcanic activities.
Hence, these components play a significant role in the formation and characteristics of igneous rocks.
Learn more about igneous rocks here:
https://brainly.com/question/30989504
#SPJ11
The half-life of radium-226 is 1590 years. (a) A sample of radium-226 has a mass of 100mg. Find a formula for the mass of the sample that remains after t years. (b) Find the mass after 1000 years correct to the nearest milligram. (c) When will the mass be reduced to 30mg ?
The formula for the mass remaining after t years for a sample of radium-226 with an initial mass of 100mg is given by [tex]$M(t) = 100 \times 0.5^{t/1590}$[/tex]. After 1000 years, the mass is approximately 87mg. The mass will be reduced to 30mg after approximately 2167 years.
(a) The decay of radium-226 follows an exponential decay model, where the amount of radium remaining decreases by half every 1590 years. The formula for the mass remaining after t years can be derived using the half-life concept. Let M(t) represent the mass remaining after t years, then the equation can be written as [tex]$M(t) = 100 \times 0.5^{t/1590}$[/tex]. Here, 100 represents the initial mass of the sample, and 0.5 is the decay constant derived from the half-life.
(b) To find the mass after 1000 years, we substitute t = 1000 into the formula: [tex]$M(1000) = 100 \times 0.5^{1000/1590}$[/tex]. Evaluating this expression gives us approximately 87mg.
(c) To determine when the mass will be reduced to 30mg, we need to solve the equation [tex]$M(t) = 30$[/tex] for t. Substituting M(t) and rearranging the equation gives us [tex]$100 \times 0.5^{t/1590} = 30$[/tex]. Solving this equation, we find t ≈ 2167 years. Therefore, it will take approximately 2167 years for the mass of the radium-226 sample to be reduced to 30mg.
To learn more about radium-226 refer:
https://brainly.com/question/29028571
#SPJ11
For which of the following problems would no-till farming be an appropriate solution?
Erosion is thinning the soil on a farm.
The organic matter in the soil on a farm is being depleted.
Overgrazing is compacting the soil on a farm.
A)I only
B) II only
C) I and II only
No-till farming is an appropriate solution for the problem of the depletion of organic matter in the soil on a farm. The appropriate option is B) II only.
No-till farming is a technique of planting crops without disrupting the soil through tillage. In other words, this farming technique involves planting seeds without plowing or tilling the soil. The no-till method is meant to maintain the soil's moisture and organic matter by avoiding any disturbance to its organic composition. It is a technique of growing crops from year to year without disturbing the soil's organic matter content. In this method, the seeds are directly planted into the soil, which helps in increasing soil health and reducing soil erosion and runoff.
When the soil is not able to maintain its organic composition and loses nutrients as a result of being unable to regenerate them at a sufficient pace, soil depletion occurs. Soil depletion occurs when soil nutrients are removed more quickly than they can be replenished, resulting in a lack of nutrients in the soil. The organic matter of the soil is depleted in many farming techniques that use tilling and leaving soil bare.
To know more about no-till farming visit:
https://brainly.com/question/31546171
#SPJ11
the distance (in meters) that a dropped object falls in seconds on earth is represented by =4.92. how long does it take an object to fall 50 meters?
The object takes 3.195 seconds to fall from a height of 50 meters.
Distance of the dropped object = d = 50 meters
Acceleration due to gravity, g = 9.8 m/s²
The formula to find the time taken by the object to fall is given as d = 0.5gt²
where t is the time taken by the object to fall. d = 50m and g = 9.8m/s²50 = 0.5 × 9.8 × t²50 = 4.9t²t² = 50/4.9t² = 10.2041t = sqrt (10.2041)t = 3.195 sec
Distance of the dropped object = d = 50 meters
Acceleration due to gravity, g = 9.8 m/s²
The formula to find the time taken by the object to fall is given as d = 0.5gt²
where t is the time taken by the object to fall. d = 50m and g = 9.8m/s²50 = 0.5 × 9.8 × t²50 = 4.9t²t² = 50/4.9t² = 10.2041t = sqrt (10.2041)t = 3.195 sec
Therefore, the object takes 3.195 seconds to fall from a height of 50 meters.
Learn more about Acceleration
brainly.com/question/2303856
#SPJ11
Fill in the spaces with the process involved when matter undergo phase change. You can refer to the following description above. Follow the arrows.
A particle rotates in a circle with centripetal acceleration a = 6.6 m/s². Part A What is a if the radius is doubled without changing the particle's speed? Express your answer with the appropriate un
A particle rotates in a circle with centripetal acceleration a = 6.6 m/s².if the radius is doubled without changing the particle's speed, the new centripetal acceleration will be 3.3 m/s².
The centripetal acceleration (a) of a particle moving in a circle is given by the equation:
a = v^2 / r
where v is the velocity of the particle and r is the radius of the circle.
If the radius is doubled without changing the particle's speed, it means that the velocity remains constant.
Let's denote the original radius as r₁ and the new radius as r₂ (which is twice the original radius).
Given:
Centripetal acceleration with original radius: a₁ = 6.6 m/s²
Velocity: v (constant)
For the original radius:
a₁ = v^2 / r₁
For the new radius:
a₂ = v^2 / r₂
Since the velocity remains constant, we can equate the two expressions for acceleration:
a₁ = a₂
v^2 / r₁ = v^2 / r₂
To solve for a₂, we can substitute r₂ = 2r₁:
a₂ = v^2 / (2r₁)
Thus, if the radius is doubled without changing the particle's speed, the new centripetal acceleration (a₂) will be half of the original acceleration (a₁):
a₂ = 6.6 m/s² / 2 = 3.3 m/s²
Therefore, if the radius is doubled without changing the particle's speed, the new centripetal acceleration will be 3.3 m/s².
To learn more about centripetal acceleration visit: https://brainly.com/question/79801
#SPJ11
.take a note card and place 3 drops of water on it in varying locations. stand the note card up. what happens to the water?
When three drops of water are placed in varying locations on a note card, and it is then stood up, the water tends to roll down the note card and often leaves behind a trail. This occurs as a result of gravity, which acts on the water and pulls it downward.Water molecules have an inherent tendency to stay together.
Therefore, when the water is placed on the note card, the molecules cohere with one another, and the droplet shape is formed. When the note card is then stood up, gravity pulls the water droplet in the direction of the ground. The droplet becomes elongated as it travels down the note card and moves in the direction of the trail it creates.The reason behind the trail created by the water droplet is due to the cohesive forces between the water molecules. When the water droplet moves down the note card, it leaves behind a trail.
The water molecules in the droplet also adhere to the water molecules on the surface of the note card, causing a thin film of water to remain behind as the droplet moves. This causes the trail to remain on the note card once the water droplet reaches the bottom.This is a result of surface tension, which is a property of liquids that causes them to stick to surfaces. This is what allows water to climb up the side of a glass and form a curved surface at the top. In the same way, water droplets adhere to surfaces and create trails. The cohesion and adhesion of water molecules play a significant role in this process.
To learn more about water visit;
https://brainly.com/question/28465561
#SPJ11
Which of the following set of quantum numbers (ordered n , ℓ , mℓ , ms ) are possible for an electron in an atom? Check all that apply. View Available Hint(s)for Part C Which of the following set of quantum numbers (ordered , , , ) are possible for an electron in an atom?Check all that apply. 3, 2, -3, 1/2 3, 2, 2, -1/2 5, 3, 4, 1/2 2, 2, 2, 1/2 3, 2, 0, -2 -2, 1, 0, -1/2 4, 2, -2, 1/2 3, 2, 0, -1/2
The following set of quantum numbers (ordered n , ℓ , mℓ , ms ) are possible for an electron in an atom are 3, 2, -3, 1/2; 3, 2, 2, -1/2; 5, 3, 4, 1/2; 2, 2, 2, 1/2".
The set of quantum numbers (ordered n, ℓ, mℓ, ms) are possible for an electron in an atom are as follows:3, 2, -3, 1/23, 2, 2, -1/25, 3, 4, 1/22, 2, 2, 1/2
The quantum numbers are a set of numbers that can be used to identify an electron's location.
In atoms, the principal quantum number (n), the angular momentum quantum number (l), the magnetic quantum number (ml), and the electron spin quantum number (ms) are all used.
Principal Quantum Number(n) - It specifies the energy level of an electron in an atom.
Angular Momentum Quantum Number (l) - It specifies the shape of the orbital in which the electron is present.
Magnetic Quantum Number (ml) - It specifies the orientation of the orbital in which the electron is present.
Electron Spin Quantum Number (ms) - It specifies the spin of an electron in the orbital.
In the given options, 4 sets of quantum numbers are possible for an electron in an atom.
They are 3, 2, -3, 1/2; 3, 2, 2, -1/2; 5, 3, 4, 1/2; 2, 2, 2, 1/2, and hence the correct answer is "DETAIL ANS: 3, 2, -3, 1/2; 3, 2, 2, -1/2; 5, 3, 4, 1/2; 2, 2, 2, 1/2".
Learn more about quantum numbers
brainly.com/question/14288557
#SPJ11
Cosmos: The Electric Boy Assignment
1. What was Humphry Davy's experiment and how did it go wrong? What could he have done differently?
2. What did Humphry Davy notice about a wire with electricity running through it as he brought it near a compass?
3. What was Humphry Davy's next project for Michael Faraday and why did he give him that particular project?
4. What did Michael Faraday create as a result of his efforts? How did it work?
5. What did Michael Faraday notice when he moved a magnet in and out of a wire?
6. What were some of the materials Michael Faraday used to see if light would be affected by magnets? What ended up working in the end? What did it mean?
7. What did Michael Faraday notice when he sprinkled iron filings around current carrying wires? What did he think ultimately meant?
8. Why did Michael Faraday's contemporaries in science not believe his hypothesis about field forces? What did he need in order to convince them?
9. How do the effects of Michael Faraday's invention shape society even today?
Humphry Davy's most famous experiment involved the use of a voltaic pile (an early battery) to conduct electrolysis on various substances.
1. Humphry Davy's most famous experiment involved the use of a voltaic pile (an early battery) to conduct electrolysis on various substances. One of his experiments involved passing an electric current through a mixture of potassium and water. The experiment went wrong when he increased the power of the battery, causing a violent explosion due to the release of hydrogen gas. The explosion was caused by the high reactivity of potassium with water. To prevent this mishap, Davy could have used a smaller amount of potassium or diluted the solution to reduce the reactivity.
2. When Humphry Davy brought a wire with electricity running through it near a compass, he noticed that the needle of the compass was deflected from its usual north-south orientation. This observation indicated that an electric current produces a magnetic field around the wire, leading to the deflection of the compass needle.
3. Humphry Davy assigned Michael Faraday the task of finding a way to liquefy chlorine gas. He gave Faraday this project because he recognized Faraday's experimental skills and believed that his ingenuity and dedication would lead to a successful outcome.
4. As a result of his efforts, Michael Faraday succeeded in liquefyingchlorine gas and several other gases. He developed a method using high pressure and low temperatures to condense the gases into liquid form. This breakthrough allowed for further investigation and study of these substances.
5. Michael Faraday noticed that when he moved a magnet in and out of a wire, it induced an electric current in the wire. This phenomenon is known as electromagnetic induction, and it demonstrated the relationship between magnetism and electricity.
6. Michael Faraday experimented with various materials to test their response to magnetic fields. He tried substances such as glass, copper, and sulfur, but they did not show any significant effects. However, when he used a coil of wire, he observed that a current was induced in the wire when exposed to a changing magnetic field. This discovery led to the development of the concept of electromagnetic induction and its practical applications.
7. When Michael Faraday sprinkled iron filings around current-carrying wires, he observed that the filings arranged themselves in a pattern, forming circles around the wires. He realized that these patterns represented the lines of magnetic force around the wires. This finding suggested the existence of magnetic fields and provided evidence for Faraday's theory of field forces.
8. Michael Faraday's contemporaries in science initially did not believe his hypothesis about field forces because it went against the prevalent understanding of action at a distance. They adhered to the idea that forces acted only through direct contact between objects. To convince them, Faraday needed to provide experimental evidence and develop a coherent theoretical framework to explain the observed phenomena. He achieved this through his extensive experiments and the formulation of field theory, which established the concept of field forces acting at a distance.
9. Michael Faraday's inventions and discoveries in electromagnetism and electrochemistry have shaped society to this day. They laid the foundation for the development of modern electrical technology and power generation. Faraday's work led to the invention of electric motors, generators, and transformers, which are essential components of our electrical infrastructure. His principles of electromagnetic induction and field theory also underpin technologies such as wireless communication, electric lighting, and the functioning of modern electronics. Additionally, Faraday's emphasis on experimental investigation and his dedication to sharing scientific knowledge contributed to the advancement of scientific methodology and the popularization of science education.
for more questions on experiment
https://brainly.com/question/26117248
#SPJ8
The New Horizons spacecraft, launched in 2006, spent 9.5 yr on its journey to Pluto. The spacecraft. generates electric power from the heat produced by the decay of 238 Pu, which has a half-life of 88 yr. Each decay emits an alpha particle with an energy of 5.6 MeV. New Horizons was launched with 1 10 kg of plutonium. ▼ Part B How much thermal power was generated by the plutonium when the spacecraft reached Pluto? Express your answer with the appropriate units. HA Q Pas- Value Units
Part B : Thermal power generated by the plutonium when the spacecraft reached Pluto = [(9.5 years / 88 years) * (5.6 MeV)] / 9.5 years * (1.602 × 10⁻¹³ J / 1 MeV)
To calculate the thermal power generated by the plutonium during the journey to Pluto, we need to consider the decay of 238Pu and the energy released by each decay.
- Half-life of 238Pu = 88 years
- Energy released per decay (alpha particle) = 5.6 MeV
- Mass of plutonium initially = 110 kg
First, we need to determine the number of decays that occurred during the 9.5-year journey. We can use the concept of half-life to find this.
Number of decays = (time elapsed) / (half-life)
Number of decays = 9.5 years / 88 years
Next, we can calculate the total energy released by all the decays. Since each decay emits an alpha particle with an energy of 5.6 MeV, we can multiply the number of decays by the energy per decay.
Total energy released = (Number of decays) * (Energy per decay)
Total energy released = (9.5 years / 88 years) * (5.6 MeV)
Now, to convert the energy to a thermal power value, we need to consider the time period over which the energy was released. The time period is given as 9.5 years.
Thermal power = Total energy released / time period
Thermal power = [(9.5 years / 88 years) * (5.6 MeV)] / 9.5 years
Finally, we can convert the energy units to the appropriate units. 1 MeV is equal to 1.602 × 10⁻¹³ Joules.
Thermal power = [(9.5 years / 88 years) * (5.6 MeV)] / 9.5 years * (1.602 × 10⁻¹³ J / 1 MeV)
By performing the calculations, we can determine the thermal power generated by the plutonium when the spacecraft reached Pluto.
To know more about half-life, refer to the link below:
https://brainly.com/question/24710827#
#SPJ11
when light from a laser pointer is incident on water from air and the refracted ray enters the water, how does the angle of refraction change as the angle of incidence is increased
As the angle of incidence increases when light from a laser pointer passes from air to water, the angle of refraction also increases.
The angle of incidence is the angle between the incident ray and the normal line (perpendicular line) at the interface between air and water. When light passes from a less dense medium (air) to a denser medium (water), it undergoes refraction, which is the bending of light as it enters the new medium.
According to Snell's law, the angle of refraction is related to the angle of incidence and the refractive indices of the two mediums. The refractive index of water is greater than that of air. As the angle of incidence increases, the angle of refraction also increases. This means that the light ray is bent more towards the normal line.
The exact relationship between the angle of incidence and the angle of refraction is given by Snell's law: n1sin(theta1) = n2sin(theta2), where n1 and n2 are the refractive indices of the two mediums, and theta1 and theta2 are the angles of incidence and refraction, respectively. As the angle of incidence increases, the sine of the angle of refraction also increases, resulting in a larger angle of refraction.
Learn more about refraction here
https://brainly.com/question/32243274
#SPJ11
Electrons on a radio broadcasting tower are forced to oscillate up and down an antenna 535000 times each second. Part A Find the wavelength of the radio waves that are produced. Express your answer to
The wavelength of the radio waves produced by the oscillating electrons is approximately 560 meters. Understanding the relationship between frequency and wavelength is crucial in analyzing electromagnetic waves and their propagation.
To find the wavelength of the radio waves produced, we can use the formula:
wavelength = speed of light / frequency
Given:
Frequency = 535,000 Hz
The speed of light in a vacuum is approximately 3.00 x 10^8 meters per second.
Using the formula, we can calculate the wavelength:
wavelength = (3.00 x 10^8 m/s) / (535,000 Hz)
= 560 meters
Therefore, the wavelength of the radio waves produced by the oscillating electrons is approximately 560 meters.
By using the formula for wavelength and the given frequency, we calculated that the wavelength of the radio waves produced by the oscillating electrons is approximately 560 meters. The calculation involves dividing the speed of light by the frequency. Understanding the relationship between frequency and wavelength is crucial in analyzing electromagnetic waves and their propagation.
To know more about wavelength ,visit:
https://brainly.com/question/10750459
#SPJ11
Solve the problem. 6) A pick-up truck is fitted with new tires which have a diameter of 43 inches. How fast will the pick-up truck be moving when the wheels are rotating at 345 revolutions per minute?
The speed of the pick-up truck is approximately 3.6237 miles per minute when the wheels are rotating at 345 revolutions per minute. This is calculated by using the formula for the circumference of a circle and converting the distance per minute from feet to miles.
To solve this problem, we can use the formula for the circumference of a circle:
Circumference = π * Diameter
First, we need to convert the diameter of the tires from inches to feet. Since there are 12 inches in a foot, the diameter in feet is:
[tex]\begin{equation}\text{Diameter} = \frac{43\text{ inches}}{12} = 3.5833\text{ feet}[/tex]
Next, we can calculate the circumference of the tires:
Circumference = π * 3.5833 feet
Now we need to find the distance the tires travel in one revolution. Since the circumference of the tires represents the distance traveled in one revolution, we have:
Distance per revolution = π * 3.5833 feet
The truck's wheels are rotating at 345 revolutions per minute, so we can calculate the distance traveled per minute by multiplying the distance per revolution by the number of revolutions:
Distance per minute = 345 * π * 3.5833 feet
Finally, to find the speed of the pick-up truck, we need to convert the distance per minute from feet to miles. Since there are 5,280 feet in a mile, we have:
[tex]\begin{equation}\text{Speed} = \frac{345 \pi \cdot 3.5833\text{ ft}}{5280\text{ miles per minute}}[/tex]
Evaluating this expression, we get:
[tex]\begin{equation}\text{Speed} \approx \frac{345 \cdot 3.14159 \cdot 3.5833}{5280\text{ miles per minute}}[/tex]
Simplifying further:
Speed ≈ 3.6237 miles per minute
Therefore, the speed of the pick-up truck, when the wheels are rotating at 345 revolutions per minute, is approximately 3.6237 miles per minute.
To know more about the speed refer here :
https://brainly.com/question/17661499#
#SPJ11
6-15 The water height in a dam is 80 m. What is the absolute pressure of water at the inlet of a hydro turbine if the turbine is placed at the bottom of a dam? The atmospheric pressure is 101 kPa.
The absolute pressure of water at the inlet of the hydro turbine at the bottom of the dam is 885,000 Pa.
The absolute pressure of the waterLet's consider the pressure due to the height of the water column and add it to the atmospheric pressure.
The pressure due to the height of the water column can be calculated using the hydrostatic pressure formula:
P = ρgh
The density of water, ρ, is approximately 1000 kg/m³, and the acceleration due to gravity, g, is approximately 9.8 m/s².
In this case, the height of the water column, h, is 80 m.
Let's calculate the pressure due to the height of the water column:
P_column = ρgh
P_column = (1000 kg/m³) * (9.8 m/s²) * (80 m)
P_column = 784,000 Pa
Adding the atmospheric pressure, which is 101 kPa,
After converting it to pascals:
P_atm = 101 kPa * 1000 Pa/kPa
P_atm = 101,000 Pa
The absolute pressure at the inlet of the hydro turbine:
P_total = P_column + P_atm
P_total = 784,000 Pa + 101,000 Pa
P_total = 885,000 Pa
Therefore, the absolute pressure of water at the inlet of the hydro turbine at the bottom of the dam is 885,000 Pa.
Learn more on absolute pressure here https://brainly.com/question/17200230
#SPJ1
