Physics help please

Answer:

Wheel and axle

Explanation:

Which simple machine is shown in the diagram?

a wheel and axle

From the given diagram, the machine shown is actually a wheel and axle

Description of wheel and axle

The wheel and axle is a machine consisting of a wheel attached to a smaller axle so that these two parts rotate together in which a force is transferred from one to the other.

Answer:

Wheel and axle

Explanation:

Answer:

In 1 second the amount of charge flowing through the conductor is 2.5 Q.

Explanation:

Answer:

Your fart only has so much force, not nearly enough to launch you into oblivion. Your fart and you still exert a force onto each other, so I guess, hypothetically, you could fly if you really, really try hard enough. Just make sure you don't try too hard and prolapse as a result :)

Answer:

a

Explanation:

Answer:

the answer is c

'

Explanation:

Answer:

Explanation:

A coin and feather dropped in a moon experience the same acceleration due to gravity as small as 1.625 m/s², and because of the absence of air resistance both will fall at the same rate to the ground.

If the same coin and feather are dropped in the earth, they will experience the same acceleration due to gravity of 9.81 m/s² and because of the presence of air resistance, the heavier object (coin) will be pulled faster to the ground by gravity than the lighter object (feather).

Answer:

The correct answer is "1.2 J".

Explanation:

Seems that the given question is incomplete. Find the attachment of the complete query.

According to the question,

Now,

⇒ [tex]W=\int_{x_1}^{x_2}F \ dx[/tex]

⇒      [tex]=\int_{x_1}^{x_2}-kx \ dx[/tex]

⇒      [tex]=-k \int_{-0.20}^{0}x \ dx[/tex]

By putting the values, we get

⇒      [tex]=-(60)[\frac{x^2}{2} ]^0_{-0.20}[/tex]

⇒      [tex]=-60[\frac{0}{2}-\frac{0.04}{2} ][/tex]

⇒      [tex]=1.2 \ J[/tex]

Answer:

1.67 N

Explanation:

Applying,

F = u(dm/dt)+m(du/dt)................ Equation 1

Where F = force, m = mass of the vehicle, u = speed.

Since u is constant,

Therefore, du/dt = 0

F = u(dm/dt)............... Equation 2

From the question,

Given: u = 10 m/s, dm/dt = 10 kg/min = (10/60) kg/s

Substitute these values into equation 2

F = 10(10/60)

F = 100/60

F = 1.67 N

Answer:

The arrow will bury itself farther by 3S₁

Explanation:

lets assume; the Arrow shot by me has a speed twice the speed of the arrow fired by the younger shooter

Given that ; acceleration is constant , Frictional force is constant

                    A₂ =   A₁

Vf²₂ - Vi²₂ / 2s₂  = Vf₁² - Vi₁² / 2s₁ ---- ( 1 )

final velocities = 0

Initial velocities : Vi₂ = 2(Vi₁ )

Back to equation 1

0 - (2Vi₁ )² / 2s₂ =  0 - Vi₁² / 2s₁

hence :

s₂ = 4s₁

hence the Arrow shot by me will burry itself farther by :

s₂ - s₁ = 3s₁

Note :  S1 = distance travelled by the arrow shot by the younger shooter

Answer:

when the mass of an object is decreased, the acceleration will increase

when mass is increased, acceleration decreases

Answer:

a

Explanation:

The rate of change of an object's location with relation to a reference point is its velocity, which is dependent on time. when an object is dropped from space at rest (t = 0) under the influence of gravity, the velocity of the object changes and increases with time while the acceleration decreases.

Answer:

Explanation:

For starters begin with a warning not to touch the brake drums. All of the KE is transferred to the brake drums. The result is a large rise in temperature. Heat. If you press hard on the brakes, rubber is left on the road and there is heat involved in that too.

Answer:

KInetic energy reduces.

Explanation:

Application of breaks reduces velocity. Reduction of velocity constitutes velocity reduction.

For more help contact +1 (304) 223-3136

Answer:

the unit for ΔL/L is "unitless".

Explanation:

Given;

ΔL/L

by physics convection, the above parameters can be defined as;

delta L (ΔL) is change in length, with SI unit as meters (m),

L is the original length of the material, with SI unit as meters (m)

The ratio of the change in length to the original length has no unit since both units cancel out during the division.

[tex]\frac{\Delta L }{L } = \frac{(m)}{(m)} = \ unitless[/tex]

This ratio (ΔL/L), is also called tensile strain and it has no unit.

Therefore, the unit for ΔL/L is "unitless".

Answer:

you will get huge electricity bills ............

First of all, both are not a single sheet of atom. There are many layers of atoms, so the empty part gets beside each other, so there are less empty part. Secondly, there are so many atoms that the probability that they will have empty space at the same place necessary, is negligible.

This was something from logic.

The reason I was taught in my class was that only a limited number of electrons can be in a given orbit, so atoms cannot overlap each other.

Answer:

[tex]\lambda=550nm[/tex]

Explanation:

From the question we are told that:

The slit spacing [tex]d_s=0.120mm=>0.120*10^{-3}[/tex]

Screen distance [tex]d_{sc}=2.0m[/tex]

Third Distance  [tex]X=2.75cm=>2.75*10^{-2}[/tex]

Generally the equation for Wavelength is mathematically given by

[tex]\lambda=\frac{Xd_s}{n*d_{sc}}[/tex]

Where

n=number of screens

[tex]n=3[/tex]

Therefore

[tex]\lambda=\frac{2.75*10^{-2}*0.120*10^{-3}}{3*2}[/tex]

[tex]\lambda=0.055*10^{-5}[/tex]

[tex]\lambda=550nm[/tex]

Explanation:

Explanation: It's because when he stop down from a moving bus his feet come at rest while the upper portion of his body is still in motion and he falls in the forward direction.

Answer:

Converging (convex) lens.

Explanation:

A lens can be defined as a transparent optical instrument that refracts rays of light to produce a real image.

Basically, there are two (2) main types of lens and these includes;

I. Diverging (concave) lens.

II. Converging (convex) lens.

A converging (convex) lens refers to a type of lens that typically causes parallel rays of light with respect to its principal axis to come to a focus (converge) and form a real image. Thus, this type of lens is usually thin at the lower and upper edges and thick across the middle.

Basically, the image of the object formed by a converging (convex) lens. lens is real, enlarged and inverted.

I assume the blocks are pushed together at constant speed, and it's not so important but I'll also assume it's the smaller block being pushed up against the larger one. (The opposite arrangement works out much the same way.)

Consider the forces acting on either block. Let the direction in which the blocks are being pushed by the positive direction.

The 2.0-kg block feels

• the downward pull of its own weight, (2.0 kg) g

• the upward normal force of the surface, magnitude n₁

• kinetic friction, mag. f₁ = 0.30n₁, pointing in the negative horizontal direction

• the contact force of the larger block, mag. c₁, also pointing in the negative horizontal direction

• the applied force, mag. F, pointing in the positive horizontal direction

Meanwhile the 3.0-kg block feels

• its own weight, (3.0 kg) g, pointing downward

• normal force, mag. n₂, pointing upward

• kinetic friction, mag. f₂ = 0.30n₂, pointing in the negative horizontal direction

• contact force from the smaller block, mag. c₂, pointing in the positive horizontal direction (this is the force that is causing the larger block to move)

Notice the contact forces form an action-reaction pair, so that c₁ = c₂, so we only need to find one of these, and we can get it right away from the net forces acting on the 3.0-kg block in the vertical and horizontal directions:

• net vertical force:

n₂ - (3.0 kg) g = 0   ==>   n₂ = (3.0 kg) g   ==>   f₂ = 0.30 (3.0 kg) g

• net horizontal force:

c₂ - f₂ = 0   ==>   c₂ = 0.30 (3.0 kg) g ≈ 8.8 N

Answer:

95.0 colomb

Explanation:

Make sure to understand the concept

Answer:

243 N

Explanation:

The formula for electromagnetic force is F= Kq1q2/r^2

where r is the distance between the charges, if the distance between the charges is reduced by 1/3 then F will increase by 9 [(1/3r)^2 becomes 1/9r which is 9F] so 27*9 is 243N

Answer: hello  below is the missing part of your question

A mass m = 10 kg rests on a frictionless table and accelerated by a spring with spring constant k = 5029 N/m. The floor is frictionless except for a rough patch. For this rough path, the coefficient of friction is μk = 0.49. The mass leaves the spring at a speed v = 3.4 m/s.

answer

x = 0.0962 m

Explanation:

First step :

Determine the length of the rough patch/spot

F = Uₓ (mg)

and  w = F.d = Uₓ (mg)  * d

hence;

d( length of rough patch) = w / Uₓ (mg) = 46.55 / (0.49 * 10 * 9.8) = 0.9694 m

next :

work done on unstretched spring length

Given that block travels halfway i.e. d = 0.9694 / 2 = 0.4847 m

w' = Uₓ (mg)  * d

    = 0.49 * 10 * 9.81 * 0.4847 = 23.27 J

also given that the Elastic energy of spring = work done ( w')

1/2 * kx^2 = 23.27 J

x = [tex]\sqrt{\frac{2*23.27}{5029} }[/tex]  = 0.0962 m

Answer:

The correct answer will bs "2.41 m".

Explanation:

According to the question,

M = 50 g

or,

   = 0.050 kg

[tex]\Theta = 25^{\circ}[/tex]

k = 25.9 N/m

Δx = 0.200 m

Let the traveled distance be "x".

By using trigonometry, the height will be:

⇒ [tex]h = l Sin \Theta[/tex]

hence,

⇒ [tex]Potential \ energy \ at \ the \ top=Spring \ potential \ energy[/tex]

                                       [tex]Mgh=\frac{1}{2} k(\Delta x)^2[/tex]

By putting the values, we get

             [tex]0.050\times 9.8\times lSin 25^{\circ}=\frac{1}{2}\times 25.0\times (0.200)^2[/tex]

                                              [tex]l=2.41 \ m[/tex]      

Answer:

Xcm = (6 * 0 + 4 & 3 + 2 * 0) / 12 = 1

Ycm = (6 * 0 + 4 * 0 + 2 * 3) / 12 = 1/2

(Xcm , Ycm) = (1 , 1/2)

Using definition of center of mass

Answer:

When an object is dropped, the "principal" force that acts on that object is the gravitational force.

Thus, in the absence of air resistance and such, the acceleration of the object will be equal to the gravitational acceleration:

g = 9.8m/s^2

So, when we drop objects in the moon (where there is no air) the acceleration of every object will be exactly the same. (so there is no dependence in the mass or shape of the object)

Thus, if we drop a coin and a feather in the moon, both objects will fall with the same acceleration, and then both objects will hit the ground at the same time.

But if we are in Earth, we can not ignore the air resistance (a force that acts in the opposite direction than the movement of the object)

And this force depends on the shape and mass of the object (for example, something with a really larger surface and really thin, like a sheet of paper will be more affected by this force than a small rock)

Then here, when the air resistance applies, we should expect that the heavier and smaller object (the coin) to be less affected by this force, then the resistance that the coin experiences is smaller, then the coin falls "faster" than the feather.

Answer:

The value of x is 2.1 cm from the center of the coil.

Explanation:

Radius, R = 2.7 cm

Number of turns, N = 800

The magnetic field at the axis is half of the magnetic field at the center.

[tex]B_{axis}=\frac{B_{center}}{2}\\\\\frac{\mu o}{4\pi}\times \frac{2 \pi I N R^2}{\left (R^2 + x^2 \right )^{\frac{3}{2}}} = 0.5\frac{\mu o}{4\pi}\times\frac{2\pi N I}{R}\\\\\frac{R^2}{(R^2 + x^2)^\frac{3}{2}} = \frac{1}{2R}\\\\4R^6 = (R^2+x^2)^3\\\\1.6 R^2 = R^2 + x^2\\\\x^2 = 0.6 \times 2.7\times 2.7 \\\\x = 2.1 cm[/tex]

Answer:

If the mass of B is m and the temperature change is the same, the mass of B will be 2m.

Explanation:

Q = mcT

T = mc/Q

M = 4Q/2cT........... (1)

T = Q/mc

Plug this in equation 1.

M = 4Q/(2c × Q/mc)  = 4Q ÷ 2Q/m  = 4Q × m/2Q = 2m

Answer:

E = m c^2 = 2.5 * (3 * 10E8)^2 = 2.25 * 10E17 Joules

Answer:

The answer is D. 2.25 × 1017 J

Explanation:

got it right on edge 2021

Answer:

Explanation:

The energy for an isothermal expansion can be computed as:

[tex]\mathsf{Q_H =nRTIn (\dfrac{V_b}{V_a})}[/tex] --- (1)

However, we are being told that the volume of the gas is twice itself when undergoing adiabatic expansion. This implies that:

[tex]V_b = 2V_a[/tex]

Equation (1) can be written as:

[tex]\mathtt{Q_H = nRT_H In (2)}[/tex]

Also, in a Carnot engine, the efficiency can be computed as:

[tex]\mathtt{e = 1 - \dfrac{T_L}{T_H}}[/tex]

[tex]e = \dfrac{T_H-T_L}{T_H}[/tex]

In addition to that, for any heat engine, the efficiency e =[tex]\dfrac{W}{Q_H}[/tex]

relating the above two equations together, we have:

[tex]\dfrac{T_H-T_L}{T_H} = \dfrac{W}{Q_H}[/tex]

Making the work done (W) the subject:

[tex]W = Q_H \Big(\dfrac{T_H-T_L}{T_H} \Big)[/tex]

From equation (1):

[tex]\mathsf{W = nRT_HIn(2) \Big(\dfrac{T_H-T_L}{T_H} \Big)}[/tex]

[tex]\mathsf{W = nRIn(2) \Big(T_H-T_L} \Big)}[/tex]

If we consider the adiabatic expansion as well:

[tex]PV^y[/tex] = constant

i.e.

[tex]P_bV_b^y = P_cV_c^y[/tex]

From ideal gas PV = nRT

we can have:

[tex]\dfrac{nRT_H}{V_b}(V_b^y)= \dfrac{nRT_L}{V_c}(V_c^y)[/tex]

[tex]T_H = T_L \Big(\dfrac{V_c}{V_b}\Big)^{y-1}[/tex]

From the question, let us recall  aw we are being informed that:

If the volumes changes by a factor = 5.7

Then, it implies that:

[tex]\Big(\dfrac{V_c}{V_b}\Big) = 5.7[/tex]

∴

[tex]T_H = T_L (5.7)^{y-1}[/tex]

In an ideal monoatomic gas [tex]\gamma = 1.6[/tex]

As such:

[tex]T_H = T_L (5.7)^{1.6-1}[/tex]

[tex]T_H = T_L (5.7)^{0.67}[/tex]

Replacing the value of [tex]T_H = T_L (5.7)^{0.67}[/tex] into equation [tex]\mathsf{W = nRIn(2) \Big(T_H-T_L} \Big)}[/tex]

[tex]\mathsf{W = nRT_L In(2) (5.7 ^{0.67 }-1}})[/tex]

From in the question:

W = 930 J and the moles = 1.90

using 8.314 as constant

Then:

[tex]\mathsf{930 = (1.90)(8.314)T_L In(2) (5.7 ^{0.67 }-1}})[/tex]

[tex]\mathsf{930 = 15.7966\times 1.5315 (T_L )})[/tex]

[tex]\mathsf{T_L= \dfrac{930 }{15.7966\times 1.5315}}[/tex]

[tex]\mathbf{T_L \simeq = 39 \ K}[/tex]

From [tex]T_H = T_L (5.7)^{0.67}[/tex]

[tex]\mathsf{T_H = 39 (5.7)^{0.67}}[/tex]

[tex]\mathbf{T_H \simeq 125K}[/tex]

Answer:

The collision takes a finite amount of time, during which the ball and bat are bending or being compressed

Explanation:

These two conditions can be ruled out on the fact that :The collision takes a finite amount of time, during which the ball and bat are bending or being compressed

The rule of energy is been broken here because during the collision of objects energy and momentum is conserved. i.e. the change in shape of the ball when hit by the bat should not be noticed because the compression and returning to normal shape happens instantaneously