please answer, i have 5 mins

Use each of these rules to create 4 ordered pairs using the two sequences.

The first rule is add 12, then divide by 2, starting from 4.

The second rule is multiply by 2, then subtract 2, starting from 3.

Which table shows the 4 ordered pairs created using the two sequences?

A table with three columns. The first column is labeled rule 1, the second column is labeled rule 2, and the third column is labeled ordered pair. There are four rows below the heading row. Under column rule 1 are the numbers zero, four, six, and seven. Under column rule 2 are the numbers three, five, nine, and seventeen. Under the column labeled ordered pair are zero and three, four and five, six and nine, and seven and seventeen.
A table with three columns. The first column is labeled rule 1, the second column is labeled rule 2, and the third column is labeled ordered pair. There are four rows below the heading row. Under column rule 1 are the numbers two, six, eight, and nine. Under column rule 2 are the numbers two, four, ten, and twenty-eight. Under the column labeled ordered pair are two and two, six and four, eight and ten, and nine and twenty-eight.
A table with three columns. The first column is labeled rule 1, the second column is labeled rule 2, and the third column is labeled ordered pair. There are four rows below the heading row. Under column rule 1 are the numbers four, eight, ten, and eleven. Under column rule 2 are the numbers three, four, six, and ten. Under the column labeled ordered pair are four and three, eight and four, ten and six, and eleven and ten.
A table with three columns. The first column is labeled rule 1, the second column is labeled rule 2, and the third column is labeled ordered pair. There are four rows below the heading row. Under column rule 1 are the numbers six, eight, twelve, and twenty. Under column rule 2 are the numbers one, eight, twenty-two, and fifty. Under the column labeled ordered pair are six and one, eight and eight, twelve and twenty-two, and twenty and fifty.

Answer:

2(2(3) + 2(5) + 3(5)) = 2(6 + 10 + 15) = 2(31)

= 62

D is the correct answer.

The seconds, is it between the time plunk passes Ms. q and the time that plunk finishes the race is 7.5 seconds..

Flow Distance In the Mathematics or Quants part of any competitive test, time is one of the most well-liked and significant topics. For inquiries about a variety of subjects, including motion in a straight line, circular motion, boats and streams, races, clocks, etc.

The notion of Speed, Time, and Distance is frequently employed. Candidates should make an effort to comprehend how the variables of speed, distance, and time interact.

Ms. q being slow will get a head start for the race so,

3 second head start = 3 x 5 = 15 meters

There difference in speed is 8- 5 = 3 m/s          

Time required for the Plunk to catch up to Ms. q is:

15 / 3 = 5 seconds when P catches Q  

(this is 8 seconds after Q starts the race)

In 5 seconds Plunk runs   5 x 8 = 40 meters   this is when they are at the same point that is at time 8 seconds.

60 meters left in the race will take  Plunk :

60 m / 8 m/s = 7.5 seconds to finish the race.

Learn more about Race problems:

https://brainly.com/question/17295866

#SPJ4

The minimum value of 9y – 45x^2 is 0, which occurs when y = 5x^2/3, so the range of V is all non-negative real numbers:

Range of V: [0, ∞)

To find the domain and range of the function V(x, y) = 9√(9y – 45x^2), we need to consider the values of x and y that make the expression under the square root non-negative, since we cannot take the square root of a negative number.

So, we have:

9y – 45x^2 >= 0

Dividing both sides by 9 and rearranging, we get:

y >= 5x^2/3

This means that the domain of V is all points (x, y) such that y is greater than or equal to 5x^2/3:

Domain of V: {(x, y) | y >= 5x^2/3}

To find the range of V, we note that the square root is always non-negative, so V(x, y) will be non-negative whenever 9y – 45x^2 is non-negative. The minimum value of 9y – 45x^2 is 0, which occurs when y = 5x^2/3, so the range of V is all non-negative real numbers:

Range of V: [0, ∞)

To learn more about domain visit:https://brainly.com/question/28135761

#SPJ11

Option A The diameter and circumference of a circle have a proportional relationship is True .

Diameter

The diameter is the length acrοss the circle at its widest pοint, measured frοm center tο center . The radius, a related measurement, is a line that extends frοm the circle's centre tο its edge. The diameter is equivalent tο twice the radius. (A chοrd is a line that crοsses the circle but is nοt at the widest pοint.)

Circumference

The circle's perimeter, οr the distance arοund it, is knοwn as its circumference. Imagine encircling a circle with a string. Imagine taking the string οut and extending it in a straight line. This string's length, if measured, wοuld represent yοur circle's circumference.

Learn more about Diameter

https://brainly.com/question/5501950

#SPJ!

To construct a square and a regular pentagon with equal side lengths of 0.5 inch, we need to use basic geometric constructions.

To construct a square and a regular pentagon with equal side length of 0.5 inch, follow these steps:

(a) Construct a Square:

Connect the endpoints of the four line segments to form a square.

(b) Construct a Regular Pentagon:

Repeat this process for all five vertices of the circle to form the regular pentagon.

A geometric construction is a method of drawing a figure using only a straightedge (an unmarked ruler) and a compass.

For the square, we start by drawing a horizontal line segment of length 0.5 inch. We then draw two perpendicular lines of length 0.5 inch each, meeting at the endpoints of the original line segment.

These two new line segments represent the adjacent sides of the square. We then repeat this process to create the remaining two sides of the square, and connect all four endpoints to form the complete square.

For the regular pentagon, we need to construct a circle with a radius of 0.5 inch. This will be the circumcircle of the pentagon, meaning that all five vertices of the pentagon will lie on the circle.

We draw a horizontal line through the center of the circle, and mark the points where the line intersects the circle. These five points will be the vertices of the pentagon.

We then draw line segments connecting adjacent vertices, using a compass to copy the length of each line segment from the previous one.

This process will create all five sides of the pentagon, and the figure will be a regular pentagon with equal side lengths of 0.5 inch.

Learn more about regular Pentagon

brainly.com/question/929013

#SPJ11

Check the picture below.

To show that the quadrilateral on the tile floor is a parallelogram, you can use the opposite sides theorem, opposite angles theorem, consecutive angles theorem, and Diagonal bisector theorem.

1. Opposite sides theorem: If both pairs of opposite sides of the quadrilateral are congruent (equal in length), then it is a parallelogram.

2. Opposite angles theorem: If both pairs of opposite angles of the quadrilateral are congruent (equal in measure), then it is a parallelogram.

3. Consecutive angles theorem: If the consecutive angles of the quadrilateral are supplementary (their sum is 180 degrees), then it is a parallelogram.

4. Diagonal bisector theorem: If the diagonals of the quadrilateral bisect each other (divide each other into two equal parts), then it is a parallelogram.

Choose the most appropriate theorem based on the given information and apply it to prove that the quadrilateral is a parallelogram.

Learn more about parallelograms:

https://brainly.com/question/970600

#SPJ11

Step-by-step explanation:

f(x)  =  2x^2 -12x + 16       to get to vertex form you will need to complete the square for 'x'....to do THAT you will need the x^2 coefficient to be '1'

Start like this:

2 (x^2 - 6x)    + 16        now complete the square

2 (x^2 - 6x +9)  - 18    + 16

f(x) =  2 (x-3)^2  - 2        Done.

Answer:

There is an outlier at 28.

For the expression (3m⁴n)³(2m²n⁵p)/6m⁴n⁹p⁸, the simplified-value is 9m¹⁰n⁻¹p⁻⁷.

To simplify the expression (3m⁴n)³(2m²n⁵p)/6m⁴n⁹p⁸, we first use the exponent-rule that states (qᵃ)ᵇ = qᵃᵇ to simplify the first part of the expression:

⇒ (3m⁴n)³ = 3³(m⁴)³n³ = 27m¹²n³;

Next, we can simplify the denominator by using the rules of exponents to combine the like terms:

⇒ 6m⁴n⁹p⁸ = 2×3m⁴n⁹p⁸;

Substituting the values,

We get;

⇒ (27m¹²n³)×(2m²n⁵p)/(2*3m⁴n⁹p⁸);

Simplifying the expression by cancelling out the common factors, we get:

⇒ 9m¹⁰n⁻¹p⁻⁷;

Therefore, the simplified-value is : 9m¹⁰n⁻¹p⁻⁷.

Learn more about Expression here

https://brainly.com/question/29139540

#SPJ1

The given question is incomplete, the complete question is

What is the simplified form of the expression below (3m⁴n)³(2m²n⁵p)/6m⁴n⁹p⁸;

Answer:

Domain is all x values

Range is all y values

Step-by-step explanation:

Your image is not clear enough for me to see the x or y coordinates so hope that helps you to figure it out on your own

The average rate of change of the function g(x)=6x from x=-1 to x=3 is found to be 6.

The function g(x) = 6x describes a relationship between x and the value of 6 times x. We want to find the average rate of change of this function from x = -1 to x = 3. The average rate of change tells us the average amount by which the function changes per unit of change in x over this interval.

In this case, by using the function g(x) = 6x and evaluating it for x = 3 and x = -1, a difference of 18 - (-6) = 24 is found. The difference in x's values is equal to 3 - (-1) = 4. We divide these to get an average rate of change of 6.

To know more about average rate change, visit,

https://brainly.com/question/2170564

#SPJ4

The magnitude of vector v is:
|v| = 7

The magnitude of v is simply the length of the vector v, which can be found using the Pythagorean theorem. The vector v is given as v = 7i.

To find the magnitude of v (|v|), use the formula:
|v| = √(x² + y²)

where x and y are the components of the vector v. In this case, x = 7 (from 7i) and y = 0 (since there is no j component).

Now, plug in the values of x and y into the formula:
|v| = √(7² + 0²)
|v| = √(49 + 0)
|v| = √(49)
|v| = 7

Learn more about Pythagorean theorem.

brainly.com/question/14930619

#SPJ11

The correct responses are: "Triangle DBC is similar to triangle ABC" and "The length of side DE is 13."

Since triangle ABC is similar to triangle DBE, we know that the corresponding angles are congruent and the corresponding sides are proportional.

From the given information, we know that side BC of triangle ABC corresponds to side BE of triangle DBE, since they share vertex B. Therefore, we can use the proportion:

BC / BE = AC / DE

Substituting the given values, we have:

BC / 5 = 7.5 / 13

Solving for BC, we get:

BC = (5 x 7.5) / 13 = 2.88 (rounded to two decimal places)

Therefore, the length of side BC is 2.88.

Now we can check which of the given statements are true:

"The length of side AB is 3.75." We do not have enough information to determine the length of side AB, so this statement cannot be determined to be true or false based on the given information.

"Triangle DBC is similar to triangle ABC." This statement is true, since they share angle B and the sides BC and BE are proportional.

"Angle C in triangle ABC is congruent to angle D in triangle DBE." This statement cannot be determined to be true or false based on the given information, since we do not know which angle in triangle DBE corresponds to angle C in triangle ABC.

"The length of side AC is 4.29." This statement cannot be determined to be true or false based on the given information, since we only have information about side BC and side BE. We do not have enough information to determine the length of side AC.

"The length of side DE is 7.8." This statement is false, since the length of side DE is given as 13, not 7.8.

To learn more about Triangle here:

https://brainly.com/question/14926756

#SPJ4

Answer:true

Step-by-step explanation:

Answer:

true

Step-by-step explanation

Answer:

Set your calculator to degree mode.

Use the Law of Cosines.

x^2 = 18^2 + 15^2 - 2(18)(15)(cos 105°)

x^2 = 688.7623

x = 26.2 cm

The final temperature after the next 8 hours (6 hours at -0.8°C per hour, followed by 2 hours at -0.8°C per hour) will be -2.4°C.

The final temperature can be calculated by subtracting the total temperature change from the initial temperature of 4°C.

The total temperature change during the next six hours can be calculated by multiplying the mean rate of -0.8°C per hour by the number of hours, which is 6.

-0.8°C/hour x 6 hours = -4.8°C

Therefore, the temperature after the next six hours will be:

4°C - 4.8°C = -0.8°C

For the next two hours, the temperature changed at a mean rate of -0.8°C per hour. This means the temperature decreased by:

-0.8°C/hour x 2 hours = -1.6°C

So the final temperature will be:

-0.8°C - 1.6°C = -2.4°C.

Therefore, the final temperature after the next 8 hours (6 hours at -0.8°C per hour, followed by 2 hours at -0.8°C per hour) will be -2.4°C.

To learn more about temperature, refer below:

https://brainly.com/question/11464844

#SPJ11

The shape formed by a solid intersecting with a plane, so the At level X = 3, the area of the vertical cross-section A is 108 square units.

To find the area of the vertical cross section A at the level X = 3, we need to find the equation of the circle when it is intersected by the plane X = 3.
First, let's find the value of y when X = 3 using the equation of the circle x^2 + y^2 = 36:

(3)^2 + y^2 = 36
9 + y^2 = 36
y^2 = 27
y = ±√27

Since we are dealing with a circle, there are two points on the circle at X = 3, which are (3, √27) and (3, -√27).

The distance between these two points will be the base of the triangle, which is also equal to its height (as given in the problem).

Base and height of the triangle: 2 * √27

Now we can find the area A of the vertical cross-section, which is a triangle with equal base and height:

A = 1/2 * base * height
A = 1/2 * (2 * √27) * (2 * √27)
A = 4 * 27
A = 108

So, the area of the vertical cross-section A at the level X = 3 is 108 square units.

Visit here to learn more about circle:

brainly.com/question/3033257

#SPJ11

After drawing our frequency table, we also find out that our mean is 6.73.

To make a frequency table, we have to count the number of times each value appears in the data set.

Frequency table:

Value       Frequency

5              4

6              8

7              4

8              6

9              3

To find the mean, we will add all values and divide by total number of values. The mean is:

= EF / N

= (6 + 7 + 6 + 6 + 7 + 6 + 5 + 8 + 6 + 5 + 9 + 8 + 5 + 6 + 8 + 9 + 5 + 8 + 8 + 6 + 8 + 7 + 5 + 6 + 9 + 7 + 7 + 9 + 6 + 7) / 30

= 6.83333333333

= 6.83.

Read more about frequency table

brainly.com/question/27820465

#SPJ4

Only the statement "One machine is considerably more unreliable than the rest." is valid for the data.

Total number of correct cuts = 42 + 55 + 13 + 24 + 17 = 151

Total number of cuts = 100 + 100 + 100 + 100 + 100 = 500

Percentage of correct cuts = (151/500) * 100 = 30.2%

This statement is not valid, as only 30.2% of the cuts are the correct length.

One machine is considerably more unreliable than the rest."

By examining the number of correct cuts for each machine, we can see that Machine 3 has only 13 correct cuts, while the other machines have more than 17. This statement is valid.

3. When a machine misses the correct length, it tends to cut too long."

We need to compare the number of cuts that are too long (1.26-1.27 feet) with those that are too short (1.23-1.24 feet) across all machines:

Total number of cuts too long = 4 + 2 + 3 + 6 + 4 = 19

Total number of cuts too short = 980 + 72 + 67 = 1119

This statement is not valid, as the machines tend to cut too short rather than too long.

4. "Machine 5 will cut every batch the correct length at least 92% of the time."

To check this statement, we need to find the percentage of correct cuts for Machine 5:

Percentage of correct cuts for Machine 5 = (17/100) * 100 = 17%

This statement is not valid, as Machine 5 only cuts the correct length 17% of the time, which is less than 92%.

only the statement "One machine is considerably more unreliable than the rest." is valid for the data.

Read more on valid statements here:https://brainly.com/question/28335524

#SPJ1

Therefore, there are 13 possible triangles that can be formed with sides of 7cm, 18cm and a whole number as the third side.

Using the triangle inequality law, Let's denote the sides of the triangle as a, b, and c. In this case, we have:

a = 7 cm

b = 18 cm

c = the third side, a whole number

Now, we apply the triangle inequality theorem to these sides:

a + b > c

=> 7 + 18 > c

=> 25 > c

a + c > b

=> 7 + c > 18

=> c > 11

b + c > a

=> 18 + c > 7

=> c > -11

Since c is a whole number, the third condition is always true, as there are no negative whole numbers. Therefore, we only need to consider the first two conditions:

11 < c < 25

Now, we list the whole numbers that fall within 11 and 25 within this range:

these are listed and counted

12, 13, 14, 15, 16, 17, 18, 19, 20, 21, 22, 23, 24

There are 13 whole numbers in this range. So, there are 13 possible triangles with sides of 7 cm and 18 cm, and a third side that is a whole number.

Read more on triangles herehttps://brainly.com/question/17335144

#SPJ4

Answer:

[tex]y=-\dfrac{8}{x}[/tex]

Step-by-step explanation:

Inverse proportions can be represented by an equation in the form:

[tex]\boxed{y=\dfrac{k}{x}}[/tex]

where:

To write an expression for the graphed function, first input the given point (-2, 4) into the inverse proportion equation and solve for k:

[tex]\implies y=\dfrac{k}{x}[/tex]

[tex]\implies 4=\dfrac{k}{-2}[/tex]

[tex]\implies 4 \cdot (-2)=\dfrac{k}{-2}\cdot (-2)[/tex]

[tex]\implies -8=k[/tex]

[tex]\implies k=-8[/tex]

Therefore, the expression for the graphed function is:

[tex]\boxed{y=-\dfrac{8}{x}}[/tex]

Answer:

12

325

Step-by-step explanation:

When it mentions the word "fit", you use TSA.

TSA cuboid = 2[LH+BH+LH] = 2 [ (2×3/2)+(3/2×7/2)+(2×7/2)] = 2 [ 3 + 21/4 + 7] = 2 [5¼+10] = 2 [15¼] = 2 × 61/4 = 61/2 = 30½ ft²

TSA ½ foot cube = 6L² = 6(½)² = 6×¼ = 2½

Number of cubes = 30.5÷2.5 = 12.2 = 12

TSA ⅛ foot cube = 6(⅛)² = 6×1/64 = 3/32

Number of cubes = 30.5÷3/32 = 325⅓ = 325

Step-by-step explanation:

remember the original trigonometric triangle inside the norm circle (radius = 1).

sine is the up/down distance from the triangle baseline or corresponding circle diameter.

cosine is the left/right distance from the center of the circle (and the point of the angle).

for larger triangles and circles all these function results need to be multiplied by the actual radius (which we skipped for the norm circle, as a multiplication by 1 is not changing anything).

when you look at the triangle with K representing the angle, we have 10 a the cosine value, 24 as the sine value and 26 as the radius.

so,

10 = cos(K) × 26

cos(K) = 10/26 = 5/13

Answer:

52.5

Step-by-step explanation:

First, we can see that the base is 14m. The top is 7m, and the height is 5m. Since the formula for a trapezoid is

top + base / 2 ∙ h,

we plug in our numbers to get

7 + 14 / 2 ∙ 5.

We can solve to get

21 / 2 ∙ 5

10.5 ∙ 5

52.5

Answer:

64

Step-by-step explanation:

Answer:

64...i think

Step-by-step explanation:

125 - 88=37

88-64=24

PLS MARK BRAINLIEST

So the estimated value of √6.02 using differentials is approximately 2.4556.

The change in g(x,y,z) can be estimated using partial derivatives and differentials.

We can start by finding the partial derivatives of g(x,y,z) with respect to x, y, and z:∂g/∂x = 3 + cos(z)∂g/∂y = -sin(z) + 1∂g/∂z = -x sin(z) - y cos(z)Next, we can use the point P0(1,-3,0) and the distance ds = 0.1 to find the differentials dx, dy, and dz:dx = -2/√6 dsdy = 2/√6 dsdz = 1/√6 dsUsing these values, we can estimate the change in g:Δg ≈ (∂g/∂x) dx + (∂g/∂y) dy + (∂g/∂z) dzΔg ≈ (3 + cos(0)) (-2/√6 ds) + (-sin(0) + 1) (2/√6 ds) + (-1 sin(0) - (-3) cos(0)) (1/√6 ds)Δg ≈ (3 - 2/√6) dsPlugging in ds = 0.1, we get:Δg ≈ (3 - 2/√6) (0.1)Δg ≈ 0.389

Therefore, the change in g(x,y,z) is estimated to be approximately 0.389 units if the point P(x,y,z) moves from P0(1,-3,0) a distance of ds = 0.1 unit toward the point P1(-1,-1,2).

Suppose we want to estimate the value of √6.02 using differentials. We can start by choosing x = 6 and Δx = 0.02. Then, we need to find the derivative of f(x) = √x with respect to x:

f(x) = √x

f'(x) = 1/(2√x)

Using these values, we can estimate Δy:

Δy ≈ dy = f'(x) Δx

dy ≈ (1/(2√6)) (0.02)

dy ≈ 0.005

This means that a small change of 0.02 in x produces a small change of approximately 0.005 in y. To estimate the value of √6.02, we can add this change to the known value of √6:

√6.02 ≈ √(6 + 0.02) ≈ √6.04 ≈ 2.4556

For more similar questions on estimate

brainly.com/question/24431553

#SPJ11

Answer:36

Step-by-step explanation:

3 a minute
18 in 6 minutes
36 in 12
3:1

The composite function fg(x) is a linear function​ by the proof shown below

From the question, we have the following parameters that can be used in our computation:

f(x) = 2x - 1

g(x) = -x + 3

The above functions are linear functions

This means that the function fg(x) will also be a linear function​

To prove this, we have

f(g(x)) = 2(g(x)) - 1

substitute the known values in the above equation, so, we have the following representation

f(g(x)) = 2(-x + 3) - 1

So, we have

f(g(x)) = -2x - 7

Hence, the function is a linear function

Read more about composite functions at

https://brainly.com/question/10687170

#SPJ1

In the △ABC, the  the difference between bc and ab if ad = 1 is found to be 0.709.

We can use the angle bisector theorem to solve this problem. Let's denote the length of segment BD as x and the length of segment CD as y. Then, we can write,

BD/DC = AB/AC

Using the angle bisector theorem, we know that AB/AC = BD/DC, so we can substitute to get,

x/y = AB/AC

We can solve for AB by multiplying both sides by AC,

AB = x/y * AC

Now, we can use the law of sines to find the length of AC. We have,

sin(20°)/AB = sin(140°)/AC

Solving for AC, we get,

AC = AB * sin(20°) / sin(140°)

Substituting the expression we found for AB, we get,

AC = x/yACsin(20°) / sin(140°)

Simplifying, we get,

y = xsin(140°) / (sin(20°) - sin(140°))

We know that AD = 1, so we can use the Pythagorean theorem to find BC:

BC² = BD² + CD²

Substituting the expressions we found for BD and CD, we get,

BC² = x² + y²

Substituting the expression we found for y, we get,

BC² = x² + (xsin(140°) / (sin(20°) - sin(140°)))²

Simplifying, we get,

BC² = x²(1+sin²(140°)/(sin²(20°)-2sin(20°)sin(140°)+sin²(140°)))

Using the identity sin(140°) = sin(180° - 40°) = sin(40°), we can simplify further.

Now, we can substitute x = AD = 1 and sing a calculator, we can evaluate this expression to get,

BC² ≈ 2.917

Taking the square root, we get,

BC ≈ 1.709

Therefore, the difference between BC and AB is 0.709.

To know more about angle bisector theorem, visit,

https://brainly.com/question/9742008

#SPJ4