Based on the calculations, the total pressure of the final products is equal to 1.76 atm.
How to calculate the total pressure (in atm)?From the information provided about this chemical reaction, we can logically deduce the following parameters:
Volume, V = 5.00 L.Mass, m of I₂ = 63.45 grams.Pressure, P of F₂ = 2.5 atm.Initial temperature, t₁ = 25°C.Final temperature, t₂ = 100°C.Next, we would write the properly balanced chemical equation for this chemical reaction:
I₂ + 5F₂ ⇒ 2IF₅
Also, we would determine the number of moles of each atom of I₂ and F₂:
[tex]Number \;of \;moles = \frac{mass}{molar\;mass}[/tex]
Substituting the given parameters into the formula, we have;
Number of moles = 63.45/253.8
Number of moles = 0.25 moles.
Assuming I₂ were limiting, we would need:
5 × 0.25 = 1.25 moles of F₂.
For fluorine gas, we have:
PV = mRT/MM
Mass, m = PVMM/RT
Mass, m = 2.5(5.00)(38)/(0.0821 × 298)
Mass, m = 475/24.4658
Mass, m = 19.42 grams.
Number of moles = 19.42/38
Number of moles = 0.51 moles.
The total number of moles = 0.25 + 0.51 = 0.76 mol.
For the mole fraction of I₂, we have:
Mf = 0.25/0.76
Mole fraction = 0.33.
For the mole fraction of F₂, we have:
Mole fraction = 1 - 0.33 = 0.67.
Next, we would determine the total pressure of the two elements by applying Dalton's law:
Total pressure = 0.33 × 0.27 + 0.67 × 2.5
Total pressure = 1.76 atm.
Read more on mole fraction here: https://brainly.com/question/15082496
#SPJ1
How many grams of mgo are produced by the reaction of 25. 0 g of mg with 25. 0 g of o2?
When 25.0 g of Mg react with 25.0 g of O₂ it produce 41.9g of MgO.
Chemical reaction:
2Mg + O₂ → 2 MgO
Given,
Mass of Mg = 24g
Mass of O₂ = 25 g
Molar mass of O₂ = 16×2
= 32 g
Molar mass of Mg = 24.3
Moles of Mg =25/24.3
=1.04mole
Moles of O₂ =25/32
=0.78mole
From above reaction we can say that 2moles of mg react with 1moles of O₂ to give 2moles of MgO.
So, 1 mole of Mg react with 0.5 mole of O₂ to produce 1mole of MgO.
So, 1.04 react with= 0.5× 1.04
= 0.520 g oxygen to give 1.04 moles of MgO.
From above we can say that Mg is limiting reagent.
Moles of MgO =1.04
Molar mass of MgO =40.3
Mole =given mass/ molar mass
1.04 =mass/ 40.3
Mass = 1.04×40.3
41.9 g
Thus, from above we concluded that 25.0 g of Mg react with 25.0 g of O₂ it produce 41.9g of MgO.
Learn more about limiting reagent: https://brainly.com/question/26905271
#SPJ4
Which carboxylic acid derivative can be made from another carboxylic acid derivative by a dehydration reaction?
Acid nitric oxide
When a carboxylic acid combines with an acid chloride in the presence of a base, anhydrides are frequently produced.
The Fischer esterification, which involves reacting a carboxylic acid with an alcohol to produce an ester: RCO2H + R′OH RCO2R′ + H2O, is a well-known example of a dehydration reaction. The presence of a dehydrating agent, or a chemical that reacts with water, is frequently necessary for these processes.
Although an ester is produced when an acyl chloride and an alcohol react, this conversion cannot be stopped by adding HCl to the reaction mixture. One of the most popular carboxylic derivatives is esters.
learn more about dehydration reactions https://brainly.com/question/12941706
#SPJ4
A coin collector has a bag of 50 pennies. What is weighted average of a penny in the sample according to the data?
The weighted average of a penny is = 67.9g
Calculation of average weightThe sample of penny for pre 1982 is a total of = 18 pennies.
The mass of each penny for pre 1982 = 3.1
Therefore the total weight for penny for pre 1982
= 18×3.1
= 55.8
The sample of penny for post 1982 is a total of = 32 pennies.
The mass of each penny for post 1982 = 2.5
Therefore the total weight for penny for post 1982
=32×2.5
= 80
The weighted average
= 55.8+80/2
= 135.8/2
= 67.9g
learn more about mass here:
https://brainly.com/question/14156113
#SPJ1
48. Which of the following (a) KCI (b) NaCl is called Sylvine? (c) CaCl₂ (d) MgCl₂
Answer:
(a) KCI
sylvine, is potassium chloride (KCl) in natural mineral form
Describe how the mass spectrometry readout is consistent with the chemical structure of hydrochloric acid.
The reading of mass so of hydrochloric acid involves sequence of analysis including:
Sample introductionAnalyte ionizationMass analysisIon detectionData processingThe chemical structure of hydrochloric acid is HCl
What is mass spectrometry?Mass spectrometry is defined as a special analytical technique that is used to measure the mass ratio of ions.
It is used to determine the masses of atoms of chemical elements
So therefore, the reading of mass so of hydrochloric acid involves sequence of analysis including:
Sample introductionAnalyte ionizationMass analysisIon detectionData processingLearn more about mass spectrometry:
https://brainly.com/question/17368088
#SPJ1
What products are formed in the following reaction
The correct product from this reaction is the structure in option D.
What is a secondary amine?An amine is a compound that contains an alkyl group and an amino group. We know that we can obtain an amine from ammonia by replacing one or more hydrogen atoms with alkyl groups.
The compound as shown here is a secondary amine because two hydrogen atoms have been replaced with alkyl groups. We know that the reaction between the HCl and the amine produces an ionic compound owing to the fact that the nitrogen and the hydrogen from HCl are involved in a Dative bond.
As such, the correct product from this reaction is the structure in option D.
Learn more about amines:https://brainly.com/question/3567414
#SPJ1
How many grams of NaCl are needed in order to make a liter of a 2.00 M NaCl solution? O 58.4 g O 117 g O 2.00 g
Answer:
B.) 117 g
Explanation:
(Step 1)
To find the mass, you need to first find the moles of NaCl using the molarity ratio.
Molarity = moles / volume (L)
2.00 M = moles / 1.0 L
2.00 = moles
(Step 2)
Now that you know the moles, you can convert it to grams using the molar mass.
Molar Mass (NaCl): 22.990 g/mol + 35.453 g/mol
Molar Mass (NaCl): 58.443 g/mol
2.00 moles NaCl 58.443 g
--------------------------- x ----------------- = 117 g NaCl
1 mole
At constant temperature and pressure the gibbs free energy value is a measure of the __________ of a process.
At constant temperature and pressure the gibbs free energy value is a measure of the spontaneity of a process.
At constant temperature and pressure the gibbs free energy value is zero and when gibbs free energy value is zero then the process is spontaneous . The meaning of spontaneous is that the process is takes place smothly with any effect and itself .
The Gibbs free energy also known as Gibbs function , Gibbs energy or free enthapy . It is a quantity that is used to measure maximum amount of work done in a thermodynamic system when temperature and pressure is keep constant.
To learn about gibbs free energy
https://brainly.com/question/20358734
#SPJ4
Copper has a delta.hfus = 13.0 kj/mol. what mass of copper releases 112.4 kj of heat as it freezes? use q equals n delta h.. 9.42 g 6.75 g 549 g 1590 g
The mass of copper releases 112.4 kj of heat as it freezes is 549 gm.
What is heat of fusion?The most typical illustration is when solid ice transforms into liquid water. The molecules within in the substance become less structured as a result of this process, which is also known as melting or heat of fusion.
Calculation for mass of copper;
The heat of fusion for copper is given as 13.0 kj/mol.
Hfus(Cu) = 13.0 kJ/mol
The heat released during the process is 112.4 kj.
Q = 112.4 kJ;
The formula for molar heat of substance is;
Q = n(Cu) · Hfus(Cu).
Where n(Cu) is the number of moles of copper present in the solution.
Write formula in terms of Number of moles.
n(Cu) = Q / Hfus(Cu)
Substitute the given values;
n(Cu) = 112.4 kJ / 13.0 kJ/mol.
n(Cu) = 8.65 mol (number of moles of copper present)
m(Cu) = n(Cu) · M(Cu).
Where, m(Cu) is the mass of copper.
M(Cu) is the molecular mass of the copper.
Substitute the values in the formula to get the mass.
m(Cu) = 8.65 mol × 63.546 g/mol.
m(Cu) = 549.428 g
Therefore, the mass of copper present in the solution was 549.428 g.
To know more about heat of fusion, here
https://brainly.com/question/10403033
#SPJ4
Answer: C.) 549 g
Explanation:
How many different products can be formed from a poorly planned crossed aldol addition?
a. 1
b. 2
c. 3
d. 4
e. 5
There are 4 different products will be formed from a poorly planned crossed aldol addition.
In a crossed aldol condensation, two distinct ketone and aldehyde reactants are used. Due to the possibility of several enolate nucleophiles as well as multiple carbonyl electrophiles, similar reactions typically result in a variety of distinct condensation products.
Ethanol and propanol undergo cross-aldol condensation, which results in two products:
one where ethanol serves as an enolate ion and the other where propanol serves as an enolate ion. 2-Methylbut-2-enal and Pent-2-enal are just the two cross-aldol derivatives.Therefore, the correct answer will be option (d)
To know more about products
https://brainly.com/question/28027128
#SPJ4
There are four different products can be formed from a poorly planned crossed aldol addition.
So the correct option is D
Two distinct ketone and aldehyde reactants are used in a crossed condensation reaction. Due to presence of distinct ketone and aldehyde reactants there are possibility of formation of several enolate ion nucleophiles as well as multiple carbonyl electrophile .
Example : Ethanal and propanone undergoes cross-aldol condensation reaction and give results in two products.
First case: ethanal acts as enolate ion
Second case: propanone acts as enolate ion
Third case: when self condensation is also a product.
to learn more about aldol addition
https://brainly.com/question/27181779
#SPJ4
What is the relationship between cubic centimetres and millimetres
Answer:
1 cc always equals 1 mL.
Explanation:
The primary difference is that milliliters are used for fluid amounts while cubic centimeters are used for solids. No matter what is being measured.
Hope this helps you
Please mark as brainliest
Are there other tests that could be used to determine if cyclohexanol is present in your product? give at least one test with some detail of what you would expect
Out of the many tests that is used to determine the presence of cyclohexanol in a product is the Lucas test.
The Lucas test is a chemical reactant that is used to identify the presence and level of alcoholism in a given solution. Cyclohexanol shows many chemical properties as do most substances, one of those property is the presence of an alcohol group.
The presence of this chemical group makes it possible to test for cyclohexanol using the Lucas test. The Lucas test will cause reactions in the presence of alcohol and convert alcohols into chloroalkanes, which is nearly insoluble in aquatic solutions.
From above, we concluded that a positive result will look like the solution separates into a cloudy chloroalkane-containing part on top of a much clearer layer.
To learn more about Lucas Test: https://brainly.com/question/714111
#SPJ4
How many moles of iron atoms are obtained from 320kg of iron oxide
Answer: 4010 mol of iron atoms
Explanation:
Given Information
Iron Oxide = Fe₂O₃
Mass = 320 kg
Given atomic mass / molecular weight
Fe = 55.8 g / mol
O = 16.0 g / mol
Fe₂O₃ = 55.8 × 2 + 16.0 × 3 = 159.6 g / mol
Given formula
n = m / M
n = number of molesm = massM = molecular weightConvert the unit of mass to Gram
1 kg = 1000 g
320 kg = 320 × 1000 = 320 000 g
Substitute values into the given formula
n = m / M
n = (320000) / (159.6)
n ≈ 2005 mol of Fe₂O₃
Calculate the number of moles of Fe (Iron atoms)
Since each mole of Fe₂O₃ has 2 moles of Fe, then:
2005 × 2 =[tex]\Large\boxed{4010~mol~of~Fe}[/tex]
Hope this helps!! :)
Please let me know if you have any questions
Carbon dioxide is considered a waste product of cellular respiration.
a. true
b. false
Answer: True
Explanation:
If the change in entropy of the surroundings for a process at 451 k and constant pressure is -326 j/k, what is the heat flow absorbed (in kj) by the system?
If the change in entropy of the surroundings for a process at 451 k and constant pressure is -326 j/k, then heat flow absorbed (in kj) by the system is -147.026kJ.
What is entropy?The entropy of particle is defined as how random it move. It shows the randomness of the system or may be disorders of the system. It is used to measure the unavailable energy for performing useful work.
Unit of entropy = J/K
Formula:∆s = ∆Q/T
where,
∆s = change in entropy of the surrounding = -326J/K
∆Q = heat absorbed from surrounding
T = Temperature = 451K
∆Q = ∆s × T
∆Q = -326 × 451
∆Q = 147,026 J
∆Q = 147.026 kJ
Thus we find that the heat absorbed by the system is 147.026 kJ.
learn more about entropy:
https://brainly.com/question/14131507
#SPJ1
Which compound reacts third fastest with fuming sulfuric acid? a. Toluene b. Chlorobenzene d. Nitrobenzene e. Benzene c. Aniline.
Toluene compound reacts third fastest with fuming sulfuric acid.
The reaction is attached in figure -
When nitration of toluene is carried out in presence of fuming nitric acid and fuming sulfuric acid under 333 K temperature , 2, 4, 6-trinitro toluene is the final product .This 2, 4, 6-trinitro toluene is also called TNT. TNT is used as explosive.What is toluene?
Toluene is a common ingredient in degreasers. It's a colorless liquid with a sweet smell and taste. It evaporates quickly. Toluene is found naturally in crude oil, and is used in oil refining and the manufacturing of paints, lacquers, explosives (TNT) and glues.What is a toluene used for?
Toluene is found naturally in crude oil, and is used in oil refining and the manufacturing of paints, lacquers, explosives (TNT) and glues. In homes, toluene may be found in paint thinners, paintbrush cleaners, nail polish, glues, inks and stain removers.Learn more about Toluene
brainly.com/question/9530946
#SPJ4
1) Calculate the empirical formula for a chemical compound that gives the following analysis: 66.6 g titanium and 33.4 g oxygen.
a) Ti_2O_3
b) Ti_2O
c) TiO_3
d) Ti_2
2) The empirical formula for a compound shows the symbols of the elements with subscripts indicating what?
a) actual numbers of atoms in a molecule
b) number of moles of the compound in 100 g
c) smallest whole-number ratio of the atoms
d) atomic masses of each element
3) In the tin oxide laboratory activity, what was the color of the vapor emitted when the nitric acid was added to the tin?
a) orange-brown
b) pink
c) green
d) blue
4) What is the empirical formula for a compound that is 36.6 percent potassium, 33.2 percent chlorine, and 29.9 percent oxygen?
KClO_2
KClO_3
K_2Cl_2O
K_2Cl_2O_5
5) What is the empirical formula for a compound that is 43.6 percent phosphorus and 56.4 percent oxygen?
P_3O_7
PO_3
P_2O_3
P_2O_5
1. The empirical formula of the compound is Ti₂O₃
2. The correct answer to the question is: smallest whole-number ratio of the atoms (Option C)
3. The correct answer to the question is: orange-brown (Option A)
4. The empirical formula of the compound is KClO₂
5. The empirical formula of the compound is P₂O₅
1. How to determine the empirical formulaTi = 66.6 gO = 33.4 gEmpirical formula =?Divide by their molar mass
Ti = 66.6 / 48 = 1.3875
O = 33.4 / 16 = 2.0875
Divide by the smallest
Ti = 1.3875 / 1.3875 = 1
O = 2.0875 / 1.3875 = 3/2
Multiply by 2 to express in whole number
Ti = 1 × 2 = 2
O = 3/2 × 2 = 3
Thus, the empirical formula of the compound is Ti₂O₃
2. What is empirical formula?This is the simplest formula of a compound which shows the smallest whole number ratio of the atoms present in the compound
With the above definition, we can conclude that the correct answer to the question is: smallest whole-number ratio of the atoms (Option C)
3. What colour is shown when nitric acid is added?In the tin oxide laboratory activity, the colour of the vapor emitted when nitric acid is added to the tin is: orange-brown
NOTE: This colour is visible when we carryout the practical experiment
Thus, the correct answer to the question is orange-brown (Option A)
4. How to determine the empirical formulaK = 36.6%Cl = 33.2%O = 29.9%Empirical formula =?Divide by their molar mass
K = 36.6 / 39 = 0.9385
Cl = 33.2 / 35.5 = 0.907
O = 29.9 / 16 = 1.8688
Divide by the smallest
K = 0.9385 / 0.907 = 1
Cl = 0.907 / 0.907 = 1
O = 1.8688 / 0.907 = 2
Thus, the empirical formula of the compound is KClO₂
5. How to determine the empirical formulaP = 43.6%O = 56.4%Empirical formula =?Divide by their molar mass
P = 43.6 / 31 = 1.406
O = 56.4 / 16 = 3.525
Divide by the smallest
P = 1.406 / 1.406 = 1
O = 3.525 / 1.406 = 5/2
Multiply by 2 to express in whole number
P = 1 × 2 = 2
O = 5/2 × 2 = 5
Thus, the empirical formula of the compound is P₂O₅
Learn more about empirical formula:
https://brainly.com/question/24297883
#SPJ1
Explain how the rate of diffusion of a gas is related to its molar mass.
carbon dioxide gas (co2) effuses 3.2 times faster than an unknown gas. determine the molar mass of the unknown gas. show your work or explain your answer, giving specific values used to determine the answer.
The molar mass of the other gas is 450.56 g.
Calculation:
Relation between rate of diffusion and molar mass of two gases is given by:
r₁/r₂ = (√m₂)/(√m₁)
Given,
r₁ = 3.2r₂
(r₁ is the diffusion rate of CO₂ and r₂ is the diffusion rate of the other gas)
We know
m₁ = molar mass of CO₂ = 44 g
To find,
m₂ = molar mass of the other gas =?
Put the values in the above equation,
r₁/r₂ = (√m₂)/(√m₁)
3.2r₂/r₂ = (√m₂)/(√44)
3.2 = (√m₂)/(√44)
Squaring both the sides,
10.24 = m₂/44
m₂ = 10.24 (44)
m₂ = 450.56 g
Hence, the molar mass of the other gas is 450.56 g.
Learn more about rate of diffusion here:
https://brainly.com/question/10250632
#SPJ4
Draw the major product of the reaction between 1-butanol and na2cr2o7, h2so4, h2o
The major product of reaction between 1-butanol and Na2Cr2O7 is butanoic acid.
When a primary alcohol like 1-butanol (OH is bonded to a primary carbon) is begin to oxidize in the presence of strong oxidizing reagent such as sodium dichromate (Na2Cr2O7) and H2SO4, sulfuric acid, the stepwise oxidation take place as above firstly to the corresponding aldehyde which undergoes further oxidation to the corresponding carboxylic acid.
You can find that the formed aldehyde after first oxidation is butanal and the only organic product, due to the strong oxidizing reagent is butanoic acid.
Thus, the major product formed is butanoic acid.
learn more about oxidation:
https://brainly.com/question/13059271
#SPJ4
LOTS OF POINT PLS HELP!!!! What is the balanced, net ionic equation for the reaction shown below? HCI (aq) + NaOH (ag)-> NaCI (aq) +H2P(l)
The net ionic equation is written as H^+(aq) + OH^-(aq) -------> H2O(l)
What is the net ionic equation?The term net ionic equation refers to the equation that shows the ions that underwent a change in the reaction. We have to note that the reaction species here must be ionic species which are able to dissociate into ions in solutions.
Now the first step is to put down the molecular equation. The molecular equation shows the reaction of the compounds as follows;
HCI (aq) + NaOH (ag)-> NaCI (aq) +H2O(l)
Next, we put own the complete ionic reaction equation as follows;
H^+(aq) + Cl^-(aq) + Na^+(aq) + OH^-(aq) -------> Na^+(aq) + + Cl^-(aq) + H2O(l)
Next we have the net ionic equation;
H^+(aq) + OH^-(aq) -------> H2O(l)
Learn more about ionic reaction equation:https://brainly.com/question/21368817
#SPJ1
What two properties (one chemical and one physical) combine to make bromcresol green useful as an acidity indicator?
Two properties are :
Bromcresol green is useful as an acidity indicator because it changes to yellow as the pH becomes more acidic
Also, the bromcresol green protons are easily dissociated making the color change visible and relatively quick.
Why is bromocresol green used as an indicator?
Bromocresol green (BCG) is a dye of the triphenyl methane family (triarylmethane dyes). It belongs to a class of dyes called sulfonephthaleins. It is used as a pH indicator in applications such as growth mediums for microorganisms and titrations.
How does a pH indicator work?
pH indicators detect the presence of H+ and OH-. They do this by reacting with H+ and OH-: they are themselves weak acids and bases. If an indicator is a weak acid and is colored and its conjugate base has a different color, deprotonation causes a color change.
What is chemical change and physical change?
Physical changes are reversible and do not produce a new substance. Chemical changes result in the production of a new substance and cannot be reversed.
Learn more about pH Indicators :
brainly.com/question/27648332
#SPJ4
Formic acid, which is a component of insect venom, has a ka = 1. 8 ✕ 10-4. what is the [h3o ] in a solution that is initially 0. 10 m formic acid, hcooh?
The [H3O+ ] in a solution that is initially 0. 10 m formic acid, hcooh is 0.00415M.
What is formic acid?Formic acid is defined as the simplest carboxalic acid which contain one carbon atom. It is weak acid.
Another name of formic acid is methanoic acid. It is used as the preservation and antibacterial agent in livestock feed.Exposure to Formic Acid can cause headache, dizziness, nausea and vomiting. individuals, may cause a skin allergy.Thus we concluded from the image that the
concentration of [H30+] is 0.00413M.
learn more about formic acid:
https://brainly.com/question/25030986
#SPJ4
During an experiment a thermometer was placed in a beaker containing hydrogen peroxide. The following observations were recorded when yeast granules were added to hydrogen peroxide.
Observation 1: Fizzing and bubbling took place.
Observation 2: The temperature began to rise.
Based on the observation, justify the type of change (physical or chemical) that took place
The states of matter change to produce the same or the new substance. When yeast is added to hydrogen peroxide bubble of carbon dioxide is formed which indicates chemical change.
What is a chemical change?A chemical change is the formation of a new substance by the chemical alterations in the reactants. The yeast releases products of cellular respiration that react with hydrogen peroxide.
The reaction is exothermic as it releases heat and increases the temperature when measured by the thermometer. The Fizzing and bubbling occur when carbon dioxide reacts with H₂O₂ to produce a new substance.
Therefore, addition of yeast to hydrogen peroxide is a chemical change.
Learn more about chemical change here:
https://brainly.com/question/27935965
#SPJ1
Answer:
The type of change that took place is most likely a chemical change, due to the recordable reactivity of the hydrogen peroxide to the yeast granules in the experiment.
Explanation:
As stated in the question, the hydrogen peroxide started fizzing and bubbling in reaction to the yeast granules, which is already a sign of a chemical change. The question also states that there was an increase in temperature. This is another sign of a chemical change. Hope this helped (;
Consider the hydrocarbon below. a skeletal model has line segments that slant down, run flat in a double bond, slant up, and run flat. which of these is a trans- isomer of the above hydrocarbon?
The correct answer would be the structure attached of the form slant up, then run flat in a double bond, slant up and run flat.
Cis-Trans isomerism(GEOMETRIC ISOMERS)Cis-trans isomers are compounds that, as a result of the existence of a hard-structure in their molecule, have distinct configurations (elements that are constantly in distinct places in space).Cis-trans isomerism may be seen in alkenes and cyclic molecules.trans-isomers: the two hydrogen atoms are on opposite sides.cis-isomers: the two hydrogen atoms are on the same side, as are the two carbon groups.To view similar questions on cis-trans isomers, you can refer:
https://brainly.com/question/15221038
#SPJ4
Answer:
D
Explanation:
Sodium hydroxide and water will react at room temperature. what does this indicate about its activation energy?
Answer:
Sodium hydroxide and water will react at room temperature. What does this indicate about its activation energy? The activation energy is at exactly 600 kJ. C. The activation energy is very low.
Explanation:
If 36. 0 ml of 0. 20 m hcl is added to 30. 0 ml of 0. 40 m naoh, what will be the ph of the resulting solution?
The pH of the resulting solution is 2.05
Sodium hydroxide and hydrochloric acid neutralize each other in a 1:1 mole ratio as described by the balanced chemical equation
[tex]NaOH_{(aq)} + HCL_{(aq)}[/tex] → [tex]NaCl_{(aq)} + H_2O_{(aq)}[/tex]
This means that a complete neutralization, which would result in a neutral solution, i.e. a solution that has pH=7 at room temperature, requires equal numbers of moles of sodium hydroxide and hydrochloric acid.
Notice that your two solutions have equal molarities, but that the volume of the hydrochloric acid solution is 1.2 times larger than the volume of the sodium hydroxide solution. This implies that the number of moles of hydrochloric acid is 1.2 times bigger than the number of moles of sodium hydroxide.
This means that after the reaction is complete, you will be left with excess hydrochloric acid → the pH of the resulting solution will be <7.
Now, the number of moles of hydrochloric acid that will not take part in the reaction is given by
= moles of HCL added - moles of NaOH added
= 36 × [tex]\frac{0.100 moles HCL}{10^3 ml}[/tex] - 30 × [tex]\frac{0.100 moles HCL}{10^3 ml}[/tex]
= [tex]\frac{6* 0.100 moles}{10^3}[/tex]
The total volume of the resulting solution will be = ( 30 + 36 ) mL
= 66 mL
Since hydrochloric acid is a strong acid that ionizes in a 1:1 mole ratio to produce hydronium cations, you can say that the concentration of hydronium cations in the resulting solution will be
[tex][ H_3O^+] = \frac{\frac{6*0.100}{10^3} }{66*10^3}[/tex]
[tex][ H_3O^+] = \frac{6*0.100}{66}[/tex]
pH = - log [tex](\frac{6*0.100}{66} )[/tex]
pH = 2.05
Therefore, the pH of the resulting solution is 2.05.
Learn more about pH here:
https://brainly.com/question/22390063
#SPJ4
A 0. 462 g sample of a monoprotic acid is dissolved in water and titrated with 0. 180 m koh. what is the molar mass of the acid if 28. 5 ml of the koh solution is required to neutralize the sample?
The molar mass of the acid if 28. 5 ml of the koh solution is required to neutralize the sample is 90.23g/mol.
For the calculation of molarity of solutionMolarity = (moles of solute/volume of solution) × 1000
Given,
Molarity of KOH solution = 0.180 M
Volume of solution = 28.5 mL
0.180 = (moles of KOH/ 28.5) × 1000
Moles = (0.18× 28.5)/1000
= 0.00513 mol
Chemical equation for the reactionHA + KOH ------- KA + H2O
1 moles of KOH reacts with 1 moles of HA.
So, 0.00513 moles of KOH react with 0.00513 moles of HA.
To calculate the molar mass for given number of molesNumber of moles= given mass/ Molar mass
Given,
Mass of HA = 0.462 g
Moles of HA = 0.00512 mol
0.00512 = 0.462/ Molar mass
Molar mass = 90.23 g/ mol.
Thus the molar mass of HA required to neutralize the 28.5 mL of KOH is 90.23g/mol.
learn more about molar mass or moles:
https://brainly.com/question/26416088
#SPJ4
How can we increase the rate of collisions between the reactants in this reaction? mg 2hcl → mgcl2 h2
The frequency of collisions between the two reactants increases as the concentration of the reactants increases. When collisions happen, they don't always cause a reaction (atoms misaligned or insufficient energy, etc.). Higher concentrations result in more collisions and reaction opportunities.
Increasing a reactant's surface area increases the frequency of collisions and thus the reaction rate. The surface area of several smaller particles is greater than that of a single large particle. The greater the available surface area for particles to collide, the faster the reaction will occur.
How does concentration affect the rate of collisions between reactants?Thus, we can conclude that by increasing the concentration of Mg in the reaction mixture we increase the rate of collisions between the reactants in this reaction.
What does the half reaction of an oxidation-reduction reaction show?Iron gains electrons in the half reaction of an oxidation-reduction reaction. What does iron's electron gain mean? It has been reduced. Predict the product that will precipitate out of the reaction using the solubility rules and the periodic table.
Learn more about collisions of particles:
https://brainly.com/question/14897392
#SPJ4
When removing nail wraps, it is recommended that when the client places her hand in the bowl of acetone, the acetone be about ____ above the nail wraps.
When removing nail wraps, it is recommended that when the client places her hand in the bowl of acetone, the acetone be about fully covered above the nail wraps.
What is nail wraps?Nail wraps, often known as nail paint strips, are nail improvements with printed patterns, glitter, or solid colors. Without the use of glue, they are attached to the nail in a flexible strip. There may be 12 to 22 various sized strips per box, depending on the manufacturer, which takes into account the range in size of each person's fingernail.
Nail wraps have a long history that dates back to the 1980s. The popularity of nail polish and the rise in salon visits gave rise to the demand for a better at-home manicure. Although several companies produced nail wraps and polish strips, it wasn't until the 2000s that they truly started to catch popularity. Since then, their appeal has increased.
To learn more about nail wraps from the given link:
https://brainly.com/question/9876641
#SPJ4
What type of reaction is: iron + sulfur -> iron sulfide? A. Double Replacement B. Decomposition C. Synthesis D. Combustion
Answer:
Hi there. In this question, we are trying to classify this reaction type. What we see happening here is we're told that we have sulfur which is in its solid state and it is reacting with solid iron And they're going to produce solid Iron three sulfide. So that is going to be f. E two S. Three. And that is a solid. I know it was F. E two S. Three because the iron three tells us the charge on the iron is three plus and sulfur voice forms ions with a too negative charge. Therefore it has to be FE two S 3. We can balance this equation although that's not necessary for this problem. But it's kind of quick. So I'll go ahead and do that. Okay, but we want to know what type of reaction it is. So we're looking for a pattern here when we see an element sulfur, it's combining with another element iron and it's producing a compound. So only one product. Alright, so looking at this general reaction type, there's only one reaction type of those five listed there, there's only one reaction type that has just one product and that is a synthesis reaction. A synthesis reaction follows this pattern where we are taking two or more simpler substances and combining them to make more complex compounds. Alright, with the simplest synthesis being element plus element equals compound. So this would be a synthesis reaction. Thank you for asking a question. And I hope this was helpful
Answer:
It should be D) Combustion Reaction
