Please help me with the question

Answer:

Step-by-step explanation:

A. Commutative Property of Multiplication

The correct equation is $25 + 0.1($25) + 0.2($25)

Iris should first figure out how much tax she will be responsible for paying.

Her supper will set you back $25 before taxes and gratuity, and the tax percentage is 10%.

Thus, she will pay the following amount in taxes:

taxes = 0.1 * $25 = $2.50

Secondly, determine how much Iris will leave in tips. Since she will leave a 20% tip, tip is :

0.2 * $25 =$5.00.

Iris will pay her bill in full, which will include taxes, a gratuity, and the price of her dinner:

Dinner price plus taxes and tip equals the final bill.

The total due is $25 plus $2.50 plus $5.00.

$32.50 is the entire cost.

So, $25 + 0.1($25) + 0.2($25) is the equation that indicates the amount of money Iris will pay for her bill.

Learn more about percentages here:

https://brainly.com/question/29306119

#SPJ1

Step-by-step explanation:

a. Since the measure of ∠ROS is 60 degrees and OR is the initial side of the rotation, OR has rotated 60 degrees counterclockwise.

b. Using the Law of Cosines in △ROS:

OS² = OR² + SR² - 2(OR)(SR)cos(∠ROS)

Since OR=1 and ∠ROS=60 degrees, we have:

OS² = 1² + SR² - 2(SR)(cos(60))

OS² = 1 + SR² - SR

Substituting SR = 1 - OS from the equation above, we get:

OS² = 1 + (1 - OS)² - (1 - OS)

Simplifying and solving for OS, we get:

OS² - 2OS + 1 = 0

(OS - 1)² = 0

So, OS = 1 and SR = 0.

c. Since OR=1 and the measure of ∠ROS is 60 degrees, we can use trigonometry to find the coordinates of point R. Let (x,y) be the coordinates of R. Then we have:

sin(60) = y/1

y = √3/2

cos(60) = x/1

x = 1/2

Therefore, the exact coordinates of point R are (1/2, √3/2).

The time of the day when two vehicles will leave park at same time is 11:20 a.m.

Traffic can be controlled by adjust the departure times, use a reservation system, limit the number of vehicles , and promote carpooling.

To create the departure timetable,

Start by listing the times at which the first bus and minibus will leave the park.

From there, add 40 and 50 minutes respectively to each departure time to find the next departure time for each vehicle.

Here is the timetable,

Departure time                Bus interval         Minibus interval

8.00 a.m.                               40min               50min

8.40 a.m.                               40min               50min

9.20 a.m.                               40min               50min

10.00 a.m.                               40min               50min

10.40 a.m.                               40min               50min

11.20 a.m.                               40min               50min

12.00 p.m.                               40min               50min

12.40 p.m.                               40min               50min

1.20 p.m.                               40min               50min

2.00 p.m.                               40min               50min

2.40 p.m.                               40min               50min

3.20 p.m.                               40min               50min

4.00 p.m.                               40min               50min

4.40 p.m.                               40min               50min

To identify any time of the day when the two vehicles will leave the park at the same time.

When the time of the intervals of the two vehicles overlap.

The least common multiple LCM of 40 and 50 is 200.

The two vehicles will leave the park at the same time every 200 minutes, or 3 hours and 20 minutes.

The first time this happens is at,

8:00am + 200 mins = 11:20am

So, at 11:20am both vehicles will leave the park at the same time.

To control traffic jam the park manager can consider the following strategies,

Adjust the departure times,

If the departure times are causing congestion,

The manager can adjust the intervals or the departure times to spread out the flow of vehicles.

Use a reservation system,

The manager can use a reservation system to stagger the departure times of the vehicles.

Ensuring that there are no backlogs at the loading area.

Limit the number of vehicles,

The manager can limit the number of vehicles that are allowed in the park at any given time.

To reduce the number of vehicles on the road and prevent congestion.

Promote carpooling,

The manager can encourage visitors to carpool to the park to reduce the number of vehicles on the road.

This can be done through promotional campaigns or by offering incentives for carpooling.

Learn more about time here

brainly.com/question/31290230

#SPJ4

An equivalent decimal, fraction and percent is C) 0.45, 4/5, 45%.

To understand why this is the correct choice, we need to look at how decimals, fractions, and percentages are related. Decimals are just another way of representing fractions, where the denominator is a power of 10. For example, 0.45 is the same as 45/100 or 9/20.

Percentages, on the other hand, are just a way of representing fractions with a denominator of 100. So, 45% is the same as 45/100 or 9/20.

The other options do not have equivalent representations of decimals, fractions, and percentages.

In conclusion, understanding the relationships between decimals, fractions, and percentages is essential to solving problems like these. The key is to remember that they are just different ways of representing the same value, and with a bit of practice, it becomes second nature to recognize equivalent representations.

Therefore, option C shows an equivalent decimal (0.45), fraction (4/5), and percent (45%).

To learn more about decimal here:

https://brainly.com/question/1736596

#SPJ4

Answer:

Step-by-step explanation:

Find the equivalent for each

1. R

2. S

3. Q

4. QS  put a line over this

5. QR  put a line over

6. MN put a line over

7. LN put a line over

8.  RS put a line

9.  2

10.  6

11.  3y+5=14

        3y=9

          y=3

12.  2

The calculated value of the expression A + B is 60

From the question, we have the following parameters that can be used in our computation:

A - B = 56

B = 2

Substitute the known values of B in the above first equation

So, we have the following representation

A - 2 = 56

Evaluate the sum

A = 58

Add B to both sides

A + B = 58 + B

So, we have

A + B = 58 + 2

Evaluate

A + B = 60

Hence the solution is 60

Read more about expression at

https://brainly.com/question/15775046

#SPJ1

The surface area of the cone is 650.54 mi²

Surface area of a cone is the total area covered by its surface. The total surface area will cover the base area and lateral surface area of the cone. Cone is defined as a three-dimensional solid structure that has a circular base.

The formula of surface area of a cone is given as;

S.A = πr(r + √h² + r²)

The diameter of the base is given as 16 mi

radius = diameter / 2

radius = 16 /2

radius = 8 mi

The slant height is given as 17.9 mi and we can use Pythagorean theorem to find the height of the cone.

h² = 17.9² - 8²

h = 16.01mi

Using the height and radius, we can calculate the surface area of the cone.

S.A =  πr(r + √h² + r²)

S.A = 3.14 * 8 (8 + √(16.01² + 8²)

S.A = 650.54 squared miles

Learn more on surface area of cone here;

https://brainly.com/question/6613758

#SPJ1

This is an exercise in solving problems involving quadratic functions, which is an important topic in mathematics and is used in many fields, including physics, engineering, and economics. In general, one seeks to find the critical points of a quadratic function, such as the vertex or the roots, to understand the behavior of the function in different situations.

To find the vertex of a quadratic function, we use the canonical form of the quadratic equation, which is f(x) = a(x - h)^2 + k, where (h, k) are the coordinates of the vertex. It is also possible to find the vertex using the formula -b/2a, which is derived from the general form of the quadratic equation.

In addition to finding the vertex, it is also common to find the roots of a quadratic function, which are the values of x where the function vanishes. This can be done using the general formula of the quadratic equation or by completing the square.

f(x) = 2(x + 8)² - 2

First we write the quadratic function in standard form.

Using (a + b)² = a² + 2ab + b², expand the expression.

   f(x) = 2(x² + 16x + 64) - 2

We distribute the 2 to the terms that are between the parentheses.

  f(x) = 2x² + 32x + 128 - 2 ⇒ subtract 2

  f(x) = 2x² + 32x + 126

Now we identify the coefficients a and b of the quadratic function.

a = 2, b = 32

We find the x-coordinate of the vertex by substituting a = 2 and b = 2 into x = - (b)/(2a).

     x = - (32)/(2 × 2) = - 32/4 = -8

     x = -8

Find the y-coordinate of the vertex by evaluating the function for x = -8.

   f(x) = 2(x + 8)² - 2, x = -8

  We substitute x = -8 in the equation.

    f(-8) = 2(-8 + 8)² - 2

The sum of two opposite numbers is equal to 0. The Inverse Property of Addition states that the sum of two opposite numbers is equal to 0.

f(-8) = 2 x 0² - 2

0 raised any positive power is equal to 0. We remember that a power represents a repeated multiplication of the base.

Therefore, the power 0² means that 0 is multiplied by itself 2 times, resulting in 0.

f(-8) = 2 × 0 - 2

Any expression multiplied by 0 equals 0.

f(-8) = 0 - 2

Removing the 0 does not change the value, so we remove it from the expression.

  f(-8) = -2

The vertex of the graph of the quadratic function is at (-8, -2).

  (-8,-2)

The vertex of the quadratic function f(x) = 28(x + 8)² - 2 is (-8,-2), the last option being correct.

ヘ( ^o^)ノ＼(^_^ )If you want to learn more about mathematics, I share this link to complement your learning:

https://brainly.com/question/11582506

Answer:

x = 14, y = 7√3, z = 7√2

Step-by-step explanation:

In an isosceles right triangle, the length of the hypotenuse is √2 times the length of a leg. In a 30°-60°-90° right triangle, the length of the longer leg is √3 times the length of the shorter leg, and the length of the hypotenuse is twice the length of the shorter leg. So x = 14, y = 7√3, and

z = 7√2.

The correct option is A, Testing begins before finishing the integration testing in order to validate it is NOT part of the validation testing stage.

Validation testing is a software testing technique that evaluates a system or application to ensure that it meets the specified requirements and satisfies the customer's needs. The main goal of validation testing is to verify whether the software meets the intended purpose and functions as expected in the real-world scenario.

In validation testing, the system is tested against the user requirements, specifications, and business needs. This type of testing focuses on the overall performance and functionality of the system, including usability, reliability, and security. It helps to ensure that the software meets the user's expectations and is ready for deployment. The validation testing process typically involves a series of tests, including system testing, acceptance testing, and regression testing.

To learn more about Validation testing visit here:

brainly.com/question/29808164

#SPJ4

Complete Question:-

Which of the following is NOT part of the validation testing stage?

a. Testing begins before finishing the integration testing in order to validate it.

b. Testing begins at the end of integration testing.

c. Testing begins when individual components have been tested.

d. Testing begins when the software is completely assembled

The quadratic function g(x) = - 3 · (x + 5)² + 12 is the result of the following rigid transformations:

In this problem we find a quadratic equation that must be modified by means of rigid transformations. The most known rigid transformations are listed below:

If we know that f(x) = x², then the resulting functions are found by using the following steps:

1) Write the entire function:

f(x) = x²

2) Horizontal translation:

f'(x) = (x + 5)²

3) Vertical dilation:

f''(x) = 3 · (x + 5)²

4) Reflection about x-axis:

f'''(x) = - 3 · (x + 5)²

5) Vertical translation:

g(x) = - 3 · (x + 5)² + 12

To learn more on rigid transformations: https://brainly.com/question/28004150

#SPJ1

The 99% prediction that number of defects per countertop is (-19.68, 9.13), under the given condition that new employee have had 13 hours of training.

Let us assume a linear regression model where the number of defects per countertop is projected based on the number of hours of training an employee has received. The 99% prediction interval for the number of defects per countertop can be evaluated applying the formula
y' ± t(α/2,n-2) × s[y"]
here
y' = predicted value of y,
t(α/2,n-2) = t-critical value for a given level of confidence (in this case 99%)
(n-2) =degrees of freedom ,
s[y"] = standard error of the estimate.

Utilizing the given data, we can evaluate y'

y' = 6.717822 - 1.004950 × 13
= -5.276

Therefore, the standard error of the estimate  is given as 1.229787.
Applying a t-distribution table with n-2 degrees of freedom (n=1), we can get that t(α/2,n-2) = 12.706. Then, the  evaluated 99% prediction interval for the number of defects per countertop is
-5.276 ± 12.706 × 1.229787
= (-19.68, 9.13)

To learn more about  linear regression model,
https://brainly.com/question/30884929
#SPJ4

The percentage of wheel production times that will take more than 28 hours is approximately 2.28%.

We can use the standard normal distribution table to find the percentage of production times that will take more than 28 hours. We will convert the given data into a standard normal distribution by using the formula:

z = (x - μ) / σ

Where:

x = the given production time (in this case, 28 hours)

μ = the mean production time (20 hours)

σ = the standard deviation (4 hours)

z = (28 - 20) / 4

z = 2

We can use the standard normal distribution table to find the percentage of values that are greater than 2. In the standard normal distribution table, we can find that the percentage of values that are greater than 2 is approximately 2.28%.

To know more about percentage here

https://brainly.com/question/13729841

#SPJ4

The statement that describes the relationship between the larger figure and the smaller figure, its image after a dilation is given as follows:

C. The edge lengths of the smaller figure are less than half than those of the larger figure.

The scale factor is given as follows:

k = 1/4 = 0.25.

A dilation can be defined as a transformation that multiplies the distance between every point in an object and a fixed point, called the center of dilation, by a constant factor called the scale factor.

The side lengths are given as follows:

Hence the scale factor is given as follows:

k = 3/12

k = 1/4

k = 0.25.

More can be learned about dilation at brainly.com/question/3457976

#SPJ1

Player 2 is more likely to hit the ball than Player 1 because P(Player 2) > P(Player 1). Then the correct option is B.

Given that:

P(Player 1) = 4/7 = 0.57

P(Player 2) = 5/8 = 0.625

P(Player 3) = 3/6 = 0.50

The probabilities are arranged in ascending order as,

P(Player 3) < P(Player 1) < P(Player 2)

Player 2 is more likely to hit the ball than Player 1 and Player 1 is more likely to hit the ball than Player 3.

Thus, the correct option is B.

More about the probability link is given below.

https://brainly.com/question/795909

#SPJ1

It would take 28 minutes to evacuate 21,000 people from the Wild Wind Stadium using only 15 exits

The time to evacuate the stadium varies directly with the number of people and inversely with the number of exits used. This means that the time it takes to evacuate the stadium is proportional to the number of people and inversely proportional to the number of exits used.

Let t be the time it takes to evacuate 21,000 people if only 15 exits are used. Let k be a constant of proportionality. Then we have

t = k × (number of people) / (number of exits)

We know that it takes 20 minutes to evacuate the stadium with all 25 exits in use. This gives us another equation

20 = k × 25000 / 25

Simplifying this equation, we get

20 = 1000k

k = 0.02

Now we can use this value of k to find the time it takes to evacuate 21,000 people with only 15 exits

t = 0.02 × 21000 / 15

t = 28 minutes

Learn more about equation here

brainly.com/question/14603452

#SPJ4

the theoretical probability that you would draw a spade is 1/4

From the question, we have the following parameters that can be used in our computation:

Drawing a spade

In a sample space of 52 cards, we have

Spade = 13

So, we have

Probability = 13/52

Evaluate

Probability = 1/4

Hence, the probability is 1/4

Read more about probability at

https://brainly.com/question/251701

#SPJ1

The difference between the two high altitudes is therefore 300 feet.

Let 't' denote the time in minutes when both birds are at the same height. If both of these fowls are traveling, one descending and the latter ascending, then we obtain a formulaic value for t using the equations below.

Therefore, if we solve: 75t - 25t = 400, it follows that 50t = 400 and t = 8 minutes.

Given this information, after 8 minutes, the two birds reach the same height.

Consequently, before the 8-minute interval, bird A is situated at a higher level than bird B since the prior's rate of descent is less than the current bird's ascent.

Once they have reached the shared altitude, bird B is above bird A given its continuous upward elevation, contrasting against bird A's descending course.

Their heights after only 1 minute has elapsed; the Height of bird A after 1 minute is calculated to be 425 feet - (500 - 75(1)) and for bird B it is 125 feet - (100 + 25(1)).

The difference between the two high altitudes is therefore 300 feet.

Read more about height in air here:

https://brainly.com/question/27709539
#SPJ1

Based on the concepts of simple interest and compound interest, the TRUE statement about these two accounts after 5 years is b) Account Y would earn Monica $62.70 more interest than Account X.

Under the simple interest system, interest is computed on only the principal for each period.

Under the compound interest system, interest is computed on both the principal and accumulated interest for each period.

Principal = $3,000

Interest Rate = 2.1%

Period = 5 years

Simple Interest = $315.00 ($3,000 x 2.1% x 5)

N (# of periods) = 5 years

I/Y (Interest per year) = 2.4%

PV (Present Value) = $3,000

PMT (Periodic Payment) = $0

Results:

FV = $3,377.70

Total Compound Interest =$377.70

Difference in Interest = $62.70 ($377.70 - $315.00)

Learn more about simple interest and compound interest at https://brainly.com/question/2277782.

#SPJ1

Monica wants to open a savings account with a deposit of $3,000.  Monica will not make any further withdrawals or deposits after she opens the account.  Her bank offers two different savings accounts.

Which statement about these two accounts after 5 years is true?

Options:

a) Account X would earn Monica $62.70 more interest than Account Y.

b) Account Y would earn Monica $62.70 more interest than Account X.

c) Account X would earn Monica $45.00 more interest than Account Y.

b) Account Y would earn Monica $45.00 more interest than Account X.

The volume of Justine's rectangular prism is: 8 units

V = l x w x h = 160 cubic units

Since the height of Justine's prism is 10 units, we can solve for the area of the base by dividing the volume by the product of the height and the length:

lw = V/h = 160/10 = 16 square units

So the area of the base of Justine's prism is 16 square units.

V' = V/2 = 160/2 = 80 cubic units

To find the area of the base of Larry's prism, we can use the same formula as before:

lw = V'/h = 80/10 = 8 square units

So the area of the base of Larry's prism is 8 square units.

Read more on rectangular prism here:https://brainly.com/question/128724

#SPJ4

The length of the arc corresponding to the subtended central angle EFD would be = 7/3π. That is option C.

To calculate the length of an arc of a circle, the formula that should be used ;

= 2πr(∅/360)

where,

radius=r= 4 units

∅ = 180(30+45)

= 180- 75

= 105°

length of an arc= 2×π ×4(105/360).

= 7/3π

Learn more about circle here:

https://brainly.com/question/26594685

#SPJ1

The measure of the angle N is 17 degrees

From the information given in the parallelogram, we have the angles written as;

m<N = 3y + 8

m<M = 6y - 1

m< P = 6x

m< L = 5x + 9

Then, we can say that;

m< M = m<N

Substitute the values, we get;

6y - 1 = 3y + 8

collect the like terms

6y - 3y = 8 + 1

add the values

3y =9

Divide both sides by the coefficient of the variable, y , we have;

y = 9/3

Divide the values

y = 3

Then, m<N = 3y + 8 = 3(3) + 8 = 17 degrees

Learn more about parallelograms at: https://brainly.com/question/10744696

#SPJ1

An equation that is represented by the graph below include the following: 3) y = |x| - 3.

In Mathematics, the translation a geometric figure or graph downward simply means adding a digit to the value on the y-coordinate of the pre-image or function.

In Mathematics, a vertical translation to the positive y-direction (downward) is modeled by this mathematical expression g(x) = f(x) - N.

Where:

In conclusion, we can logically deduce that the graph of the parent function was y = |x| stretched away from the y-axis and translated by 3 units downward;

y = |x|

f(x) = |x| - 3

Read more on translation here: brainly.com/question/26869095

#SPJ1

Answer:

Step-by-step explanation:

If moving due west is +16, then moving due east is going to cover up for -16 and an additonal -2 to the east. which sums up to -18. Therefore -18 is 2units to the east.

Answer:

B

Step-by-step explanation:

• a line sloping upwards from left to right is positive

• a line sloping downwards from left to right is negative

• a horizontal line parallel to the x- axis has a slope of zero

the line here is sloping upwards from left to right, thus has a positive slope.

Answer:

Step-by-step explanation:

B

if the line makes an angle less than or equal to 90 with the horizontal has a positive slope