Please help me with this i don't know how to set up a graph. Thank you!

The container holds 5 mL of fluid, which is less than 500 mL of fluid.

5 mL is much smaller than 500 mL, so the container holds less than 500 mL of fluid.

The numerator and denominator of a unit conversion factor have the same quantity in different units. Multiplying by a conversion factor has no effect on the number's inherent value because the factor is comparable to multiplying by 1.

The numerator is the intended unit, whereas the denominator is the supplied unit.

The primary guideline is to multiply when converting from a bigger unit to a smaller unit. Divide to convert from a smaller unit to a larger unit. You will reduce the number, and as you are aware, division is all about reducing numbers.

For more questions on Unit conversion and comparision

https://brainly.com/question/17739692

#SPJ4

Jack will require 6 tsp of baking powder if he uses 9 c of flour.

Given: Jack's pancake recipe calls for 3 cups of flour and 2 teaspoons of baking powder.

The amount of baking powder required if Jack uses 9 c of flour is to be determined.

Solution:

For 3 c of flour, 2 tsp of baking powder is required

2/3 tsp of baking powder is required for 1 cup of flour.

We must now determine how much baking powder to use with 9 cups of flour.

2/3X9 tsp of baking powder is required for 9 cups of flour.

= 6 tsp

Jack will therefore require 6 tsp of baking powder if he uses 9 c of flour.

Know more about recipe

https://brainly.com/question/25936585

#SPJ4

The circumference of the circle is given by C = 2 * π * r, where r is the radius. In this case, the circumference of the circle is 2 * π * 14 = 88 cm.

Let's call the linear speed of the object v. Then, in 20 seconds, the object travels a distance of v * 20. This distance is equal to the arc length of the central angle of 1/2 radian:

v * 20 = (1/2) * (C/2π) = (1/2) * (88/2π) = 22/π cm

Solving for v, we get:

v = (22/π) / 20 = 22 / (20π) cm/s

The angular speed ω can be found by dividing the central angle by the time it took to travel that angle:

ω = 1/2 / 20 = 1/40 rad/s

So the linear speed of the object is v = 22 / (20π) cm/s, and the angular speed is ω = 1/40 rad/s.

To know more about circular Motion

https://brainly.com/question/106339

#SPJ4

As per the angle of two arc minutes, the diameter is 16.67 meters.

The term diameter in math is known as a straight line passing through the center of a figure or body

Here we know that a circular object 1000 meters away subtends an angle of two arc minutes.

Here we know that that 1 minutes of arc is 60 seconds in other word it can be written as 1/60 minutes.

So for 2 minutes it can be written as

=> 2 x 1/60 = 1/30

Here we have know that the object is 1000 meters away, then the diameter is calculated as,

=> 1000/2 x 1/30

=> 500/30

=> 16.67

Therefore option (d) is coorect.

To know more about diameter here.

https://brainly.com/question/5501950

#SPJ4

The box plot of the  the gender of the pandas in the sample is illustrated below.

The term box plot in math is defined as  a chart tool used to quickly assess distributional properties of a sample and the so-called box-and-whiskers plot shows a clear indication of the quartiles of a sample as well of whether or not there are outliers.

Here we have given that Male pandas weigh, on average, between 80kg and 140kg, and females weigh, on average, between 70kg and 120kg.

The the data for the box plot is written as,

=> 70, 80, 120 and 140.

By using this data we have plotted the box plot for the gender of the pandas in the sample.

And we have predicted the following values through it.

Minimum =70

Q1=75

Median =100

Q3=130

Maximum =140

To know more about box plot here.

https://brainly.com/question/1523909

#SPJ4

The best estimate of the area of the figure given is 13 square units. The solution has been obtained by using the counting squares method.

What is counting squares method?

The number of squares inside the shape are counted in order to determine the area.

We are given a figure which has a number of squares enclosed in it.

So, the area of the figure = Number of squares enclosed

Area = 11 complete squares + 4 half squares

Area = 11 complete squares + 2 complete squares

Area = 13 square units

Hence, the best estimate of the area of the figure given is 13 square units.

Learn more about counting squares method from the given link

https://brainly.com/question/24326530

#SPJ1

Answer: Alan would have to sell less than 540 boxes.

Step-by-step explanation:

Five million four thousand three hundred can be written in standard form as 5,004,300.

To learn more about standard form refer to:

https://brainly.com/question/19169731

#SPJ1

Answer:

The number five million four thousand three hundred can be written in standard form as `5,004,300`. In scientific notation, it can be written as `5.0043 x 10^6`.

MARK AS BRAINLIEST!!!

Based on the scatter plot below, better prediction for x when y = 42 is 53.

A scatter plot is a form of plot or mathematical diagram that displays values for two variables for a collection of data using Cartesian coordinates. One more variable can be presented if the points are programmed. A scatter plot is a collection of dots drawn on two axes, horizontal and vertical. Scatter plots are useful in statistics because they illustrate the amount, if any, of correlation between the values of observed quantities or events. Scatter plots are used to demonstrate how much one variable affects another by plotting data points on a horizontal and vertical axis. Each row in the data table is represented by a marker, the location of which is determined by the values in the columns.

Here,

The scatter plot below shows that the better estimate for x when y = 42 is 53.

To know more about scatter plot,

https://brainly.com/question/29231735

#SPJ1

The value of a in the equation in the simplest form will be 17 / 6.

We are given an equation:

x³ / x^(1/6) = x^(a)

We need to evaluate the left hand side to find the value of a in the equation in simplest form.

We know that:

x^ (a) / x^ (b) = x^ ( a - b)

Using this, we get that:

x^ (3 - 1/6) = x^ (a)

x^ (17/6) = x^ (a)

By comparing the bases, we get the value of a as:

a = 17 / 6.

Therefore, the value of a in the equation in the simplest form will be 17 / 6.

Learn more about equation here:

brainly.com/question/1214333

#SPJ4

According to trigonometry, the value of sin y cos x.

The term called trigonometry is defined as the type of mathematics that deals with the relationship between the sides and angles of triangles.

Here we know that the function is written as

=> sin x coy y

where r [0, 1/2] [0, 1/2]

Here by Using Fubini’s theorem we can write this as an iterated integral to get,

=> [tex]\int\limits^{1/2}_0\int\limits^{1/2}_0 {sinxcosy} \, da[/tex]

Here the Fubini's theorem states that  the double integral over a region is equal to an iterated integral, which is computed in a similar manner with definite integrals of functions of single variable.

When we integrate the expression, then we get

=> [tex]\int\limits^{1/2}_0 {cos(1+y)sin(1+x)} \, da[/tex]

Again we have to integrate this one, then we get the value as,

=> sin y cos x.

To know more about integral here.

https://brainly.com/question/18125359

#SPJ4

In the right-angled triangle, the value of x is 16.7 degree.

In the given right-angled triangle, the angle x can be determined using the trigonometric function of tangent.  As length of the two legs is 3 feet and 10 feet, and the angle between hypotenuse and the 10 feet leg is x. In a right-angled triangle, the tangent of an angle is the ratio of opposite side to adjacent side. Hence,

Tan Ɵ = Opposite side/Adjacent side

As Ɵ = x, opposite side = 3ft, and adjacent side = 10 ft,

Tan x = 3/10

Tan x = 0.3

x = Tan^(-1) (0.3)

x = 16.7 degree

Learn more about Tangent:

https://brainly.com/question/2284484

#SPJ4

[tex]\huge\text{Hey there!}[/tex]

[tex]\mathsf{-12x < 36}[/tex]

[tex]\huge\textbf{DIVIDE \boxed{\rm{\bf -12}} to both sides:}[/tex]

[tex]\mathsf{\dfrac{-12}{-12}x < \dfrac{36}{-12}}[/tex]

[tex]\huge\textbf{SIMPLIFY it:}[/tex]

[tex]\mathsf{x < \dfrac{36}{-12}}[/tex]

[tex]\mathsf{x > -3}[/tex]

[tex]\large\text{It is a(n) \boxed{\rm{o p e n e d}} circle SHADED to the RIGHT of your number line}}[/tex]

[tex]\huge\text{Therefore your answer should be:}[/tex]

[tex]\huge\boxed{\mathsf{x > -3}}\huge\checkmark[/tex]

[tex]\huge\text{Good luck on your assignment \& enjoy your day!}[/tex]

Answer:

7 hours.

Step-by-step explanation:

This is a rate problem. We can start by using the formula: Rate x Time = Quantity.

The rate at which the cistern is filled is the quantity of water in the cistern divided by the time it takes to fill it. So, the rate at which the cistern is filled is 1 (the cistern is full) / 6 hours = 1/6 cistern/hour.

Similarly, the rate at which the cistern is emptied by the leak is 1 (the cistern is full) / the time it takes to empty it. So, the rate at which the cistern is emptied by the leak is 1 (the cistern is full) / 7 hours = 1/7 cistern/hour.

Since we know the rate at which the cistern is filled and the rate at which it is emptied, we can find the time it takes for the cistern to be emptied by dividing 1 (the cistern is full) by the rate at which it is emptied.

Therefore, the cistern will be emptied in 1 / (1/7 cistern/hour) = 7 hour.

The solution for each right triangle are:

(a) BC = 13.9 units, AB = 11.9 units

(b) XZ = 17.5 units

Trigonometry is the branch of mathematics that deals with the relationship between ratios of the sides of a right-angled triangle with its angles

(a) Using trigonometric ratio

sin 31.2° = 7.2/BC   (Sine = opposite/hypotenuse)

BC = 7.2/sin 31.2°

BC = 13.9 units

tan 31.2° = 7.2/AB (Tan = opposite/adjacent)

AB = 7.2/tan 31.2°

AB = 11.9 units

(b) XZ = √(14.4² + 10.0²)     (Pythagoras theorem)

XZ = 17.5 units

Learn more about trigonometry on:

brainly.com/question/29354606

#SPJ1

Answer:

If Maria uses 2 parts cream and 3 parts milk, then for every 2 parts of cream, she uses 3 parts of milk.

Since she uses 8 liters of cream, we can find the total volume of mixture by finding the equivalent volume of milk that she used.

To find the equivalent volume of milk, we multiply the volume of cream by the ratio of milk to cream:

8 liters * (3 parts milk) / (2 parts cream) = 12 liters

So Maria used 8 liters of cream and 12 liters of milk for a total volume of 20 liters.

At t = ±0.6 seconds its velocity will be zero.

When an object is moving, its velocity serves as a measure of how quickly its location is changing as it is seen from a given point of view and as time is measured using a specific unit of measurement.

The velocity of a particle is the derivative of its position with respect to time, so to find the velocity we need to take the derivative of x with respect to t.

dx/dt = 20 - 15t^2

To find when the velocity is zero, we set dx/dt = 0 and solve for t:

0 = 20 - 15t^2

15t^2 = 20

t^2 = 20/15

t = ±√(20/15)

So, the velocity is zero at approximately t = ±0.6 seconds.

Correct Question :

a particle's position is given by = 20t − 5t^3 meters. at what time is its velocity zero? give your answer to the nearest unit.

To learn more about velocity here:

https://brainly.com/question/28487060

#SPJ4

Answer:

3/2

Step-by-step explanation:

(a) The first three terms, in ascending powers of x, of the binomial expansion of (2 + kx)² are:

(2 + kx)² = 2² = 4

(2 + kx)² = 2 * 2 * kx = 4kx

(2 + kx)² = 2 * k² x² = 4k² x²

(b) If the coefficient of x is 6 times the coefficient of x, then 6 = 4k. Therefore, k = 6/4 = 3/2.

The matrix D is important because it is the diagonal representation of the matrix A, which makes it easier to work with and understand.

When diagonalizing a matrix, the goal is to find a diagonal matrix (D) that is similar to the original matrix (A). This means that the matrix D will have the same eigenvalues as the matrix A and will be represented in a more simplified form.

To find the matrix D, you must first find the eigenvalues of the matrix A. These eigenvalues can be found by solving the characteristic equation, which is found by setting the determinant of the matrix (A - λI) to zero, where λ is the eigenvalue and I is the identity matrix.

Once the eigenvalues are found, you can then find the eigenvectors, which are non-zero vectors that satisfy the equation

=> Av = λv,

where v is the eigenvector.

Once you have both the eigenvalues and eigenvectors, you can then arrange them into the matrix D, where the eigenvalues are on the main diagonal and the eigenvectors are the columns.

To make sure that D is diagonal, you may need to scale the eigenvectors so that the entries are integers. This is called normalizing the eigenvectors.

To know more about matrix here

https://brainly.com/question/28180105

#SPJ4

Step-by-step explanation:

Given eqn

y=1/3x+4

1/3x-y+4=0

eqn of line perpendicular to the given eqn.,

x+1/3y+k=0

since the reqd. line contains the point (2,-3)

2+1/3 (-3)+k=0

2-1+k=0

k=-1

so

x+1/3y-1=0

1/3y=1-x (in slope intercept form)

Answer:

first statement

Step-by-step explanation:

each day breakfast is longer

Answer:

x = 1

y = -1

Step-by-step explanation:

y = 3x + 4y

3x + 3y = 0

So, we have 2 equations that are

3x + 3y = 0

x + 2y = -1

Times the second equation by -3

3x + 3y = 0

-3x - 6y = 3

-3y = 3

y = -1

Now put -1 in for y and solve for x

x + 2(-1) = -1

x - 2 = -1

x = 1

Let's check

1 + 2(-1) = -1

1 - 2 = -1

-1 = -1

So, x = 1 and y = -1 is the correct answer.

The equivalent fraction is used such that operations like addition and subtraction can be done on fractions that don't have a common denominator.

Equivalent fractions are those fractions that reflect the same value despite having numerators and denominators that differ.

According to equivalent fractions, two or more fractions are considered to be equal if, following simplification, both provide the same fraction.

In their most basic form, all equivalent fractions are reduced to the same fraction. The equivalent fraction is used to enable operations on fractions without a common denominator, such as addition and subtraction.

Find out more on equivalent fractions at https://brainly.com/question/29370515

#SPJ1

The height of the tree is approximately 380.04 feet.

Trigonometry involves the study of angles and their relationship to the sides of a right triangle

The tallest tree in the world is a redwood in California and if you're standing 220 feet from the bottom of the tree, you have to look up at a 60-degree angle to see the top. To find the height of the tree, we need to use a concept in mathematics called trigonometry.

The height of the tree can be found using the formula:

Height of tree = Distance from bottom of tree * tan (angle of elevation)

In this case, the distance from the bottom of the tree is 220 feet and the angle of elevation is 60 degrees. Plugging in these values into the formula, we get:

Height of tree = 220 * tan (60)

The value of tan (60) can be found using a calculator or a trigonometry table. The result is approximately 1.732. So the height of the tree can be calculated as:

Height of tree = 220 * 1.732 = 380.04 feet

So in summary, the height of the tree can be found by using the concept of trigonometry and the formula for the height of a tree based on the distance from the bottom of the tree and the angle of elevation to the top of the tree.

Complete Question:

2. The tallest tree in the world is a redwood in California (as of April 2019) If you're standing on the trail 220 feet from the bottom of the tree, you have to look up at a 60 degree angle to see the top. How tall is the tree? Draw the pic so that you know what you are solving for.

To know more about angle here.

https://brainly.com/question/4316040

#SPJ4

Maximum Tolerable Moment, or MTM, is the greatest moment that a structure can withstand without breaking. Maximum Operating Stress, or MOST, is the highest amount of stress to which a structure can be subjected without experiencing permanent deformation.

Maximum Tolerable Moment, or MTM, is the greatest moment that a structure can withstand without breaking. Structural analysis techniques, such as finite element analysis and structural testing, are often used to determine this. When designing and building a structure, MTM must be considered because it is crucial for structural safety. Maximum Operating Stress, or MOST, is the highest stress to which a structure can be subjected without experiencing permanent deformation. This is often decided by running a stress study on the structure and taking into account the materials that were utilised to build it. The building must be able to sustain the anticipated loads throughout its lifespan, which is of utmost importance. Additionally, it is crucial to prevent structural deterioration over time. When designing and building a secure structure, MTM and Most must both be taken into account.

Learn more about amount here

https://brainly.com/question/28970975

#SPJ4

1862 are the number of wistles that did not pass.

percentage, a relative value indicating hundredth parts of any quantity.

Given that out of 9799 wistles that a company manufactured

19% were rejected for shipment to stores because they did not pass the quality controll standards of the company.

We have to find the number of wistles that did not pass

To find this we have to find 19% of 9799

19/100×9799

0.19×9799

1861.81

Hence, 1862 are the number of wistles that did not pass.

To learn more on Percentage click:

https://brainly.com/question/28269290

#SPJ1

Answer:

Week 7

Step-by-step explanation:

Connie will have $170 in week 7, because in 3 weeks she will add $30 to her account.

Ling will have $117.5 in week 7, because in 3 weeks he will add $4.50 to his account.

170-117.5=52.5

52.5 is greater than 50, so it satisfies the question.

Answer:

Nykai's position in relation to the ocean surface is 13.6 meters. She started 10 meters below the surface, swam down 6.1 meters deeper, and then swam up 2.5 meters. Therefore, her position in relation to the ocean surface is 10 - 6.1 + 2.5 = 13.6 meters.

Step-by-step explanation:

Answer:

f(n) = 32 - 8n

Step-by-step explanation:

24, 16, 8, 0

f(n) = 24 - 8 x (n-1)

f(n) = 32 - 8n

The lateral surface area of the frustum with a lower base radius of 6 inches, an upper base radius of 3 inches, and a height of 4 inches is 45π sq. inches is 45π sq. inches

The lateral surface area of the frustum is calculated using the given formula:

Lateral surface area of frustum = π × (sum of the radii) × √(difference of radii²  + height²)

Lower base radius of frustum = 6 inches

Upper base radius of frustum = 3 inches

Height of frustum = 4 inches

Lateral surface area of given frustum = π × (6 + 3) × √[(6 - 3)² + 4²]

                                                              = π × 9 × √[(9 + 16]

                                                              = 9π × 5

                                                              = 45π sq. inches

Hence, the lateral surface area of the given frustum is 45π sq. inches

To know more about lateral surface area here:

brainly.com/question/11385509

#SPJ4