please help this is timed.

What is the total number of complete waves in the graph below

Please Help This Is Timed.What Is The Total Number Of Complete Waves In The Graph Below

Answers

Answer 1

Answer:

2

Explanation:

you go from the middle line where it starts until you hit where it starts the pattern so if you took that shape it and flipped the bottom part it makes a big, complete oval

I hope this helped :))


Related Questions

transport moves substances from an area of low concentration to an area of high concentration.

Answers

Answer:

Active Transport

Explanation:

In cellular biology, active transport is the movement of molecules across a cell membrane from a region of lower concentration to a region of higher concentration—against the concentration gradient. Active transport requires cellular energy to achieve this movement. During active transport, substances move against the concentration gradient, from an area of low concentration to an area of high concentration. This process is “active” because it requires the use of energy (usually in the form of ATP). It is the opposite of passive transport.

Answer:

active

Explanation:

i got it right

What is emperical formula of 62.4% C 4.19 % H 33.2% O

Answers

Answer:

[tex]C_{26}[/tex][tex]H_{21}[/tex][tex]O_{10}[/tex]

Explanation:

We are given the following percentages:

Carbon ------ 62.4%

Hydrogen ------------ 4.19%

Oxygen ---------------- 33.2%

Now, let's take a 100g sample of this compound

since percentages are calculated out of 100, you will notice that the mass of the elements in the sample is the same as their percent composition

So we have:

Carbon -------- 62.4 grams

Hydrogen ----------- 4.19 grams

Oxygen ------------ 33.2 grams

With this information, we can calculate the number of moles of the respective elements in the given compound

Moles of Carbon (mass = 12u):

Given mass / Molar mass = 62.4 / 12 = 5.2 moles

Moles of Hydrogen (mass = 1u):

Given mass / Molar mass = 4.19 / 1 = 4.2 moles (approx)

Moles of oxygen (mass = 16u):

Given mass / Molar mass = 33.2 / 16 = 2 moles

The ratio of moles of the respective elements in our compound:

(Moles of Carbon)  :    (Moles of Hydrogen)   :  (Moles of Oxygen)

5.2   :     4.2   :    2

Which can be written as:    [tex]C_{5.12} H_{4.2} O_{2}[/tex]

We are almost done but there is one problem, the formulas of compounds we see have whole numbers and not decimals

So, we will multiply all 3 of the numbers by the smallest number possible to get whole number ratios

Since there are 2 numbers we need to take care of and both of them have 2 in the decimal place,

we can multiply by 5 to get whole number ratios

So we get:

26   :    21   :    10

Therefore the molecular formula of the compound:

[tex]C_{26}H_{21}O_{10}[/tex]

A 2.50M solution of NaOH is diluted from a volume of 0.890L to a volume of 2.00L, What is the new molarity?
O 2.78011
O 1.11M
O 5.62M
O 4.5M

Answers

Answer:

1.11 M

Explanation:

M₁V₁ = M₂V₂

Step 1: Define

Molarity₁ = 2.50 M

Volume₁ = 0.890 L

Molarity₂ = unknown

Volume₂ = 2.00 L

Step 2: Substitute and Evaluate for M₂

(2.50 M)(0.890 L) = (M₂)(2.00 L)

2.225 = M₂(2.00 L)

M₂ = 1.1125 M

Step 3: Simplify

We are given 3 sig figs.

1.1125 M ≈ 1.11 M

Match each term with its definition or description.

________ moles of solute per liter of solution
________moles of solute per kilogram of solvent
________mass of a substance per unit volume
________mass of a solute per mass of the total solution, multiplied by 100
________volume of a solute per volume of the total solution, multiplied by 100

a. molarity
b. weight percent
c. parts per billion
d. weight concentration
e. molality
f. Parts per billion
g. volume percent density

Answers

Answer:

a. molarity

e. molality

h. density

b. weight percent

g. volume percent

Explanation:

Molarity is defined as the number of moles of substance dissolved in per  liter of solution (moles/Liter). It is also called molar concentration of the solution.

Molality is defined as the number of moles of substance dissolved in one kg or kilogram of solvent and its SI unit is mol/kg.

Density is defined as the mass divided by its volume.

density =mass/volume

Weight percent is defined as the division of mass of a solute to the mass of the total solution, multiplied by 100. To calculate the weight percent or mass percent, both mass of a solute and the mass of a solution is required to express the concentration of a solution.

Volume percent is defined as the ratio of the volume of the solute to the volume of the total solution multiplied by 100.

A chemistry student is given 250.0 mL of clear aqueous solution at 42 C. He is told an unknown amount of a certain compound X is dissolved in the solution. The student allows the solution to cool to 25C. At that point, the student sees that a precipitate has formed. He pours off the remaining liquid solution, throws away the precipitate and evaporates the remaining liquid solution under vacuum. More precipitate forms. The student washes, dries, and weighs the additional precipitate. It weighs 8.75 g. Using only the information above, can you calculate the solubility of X at 25C? If yes, calculate it.

Answers

Answer:

No

Explanation:

The solubility of a solid in water refers to the amount of that solid that dissolves in water.

It is not possible to calculate the solubility of the solid because the student threw away the first precipitate that formed. We already have the volume of water, but having lost some mass of precipitate, it has become impossible to accurately determine the solubility.

Hence the answer provided above.

All of the following are evidence of a chemical change except

Change of matter
Formation of gas
Color change
Precipitate forms

Answers

Change of matter
- Know simple science rules and that will help.

Answer:

The right answer is A, "Change of matter."

Explanation:

The formation of gas, color change,  and precipitate forming are the 3 main chemical changes that are evidence of a new substance being produced. A change of matter is not. Changes of state are physical changes in matter. They are reversible changes that do not involve changes in matter's chemical makeup or chemical properties.

What is the mass of an object that has a density of 0.500 g/cm3 and a volume of 5.00 mL?

Answers

Answer:

The answer is 2.5 g

Explanation:

The mass of a substance when given the density and volume can be found by using the formula

mass = Density × volume

From the question

density = 0.5 g/cm³

1 mL = 1 cm³

5 mL = 5 cm³

volume = 5 cm³

The mass is

mass = 0.5 × 5

We have the final answer as

2.5 g

Hope this helps you

5. A 1.1181-g sample of an alloy (a mixture) of aluminum and magnesium was treated with an
excess of sodium hydroxide solution. In the reaction, only the aluminum reacts with the sodium
hydroxide solution:
2 Al + 2 NaOH + 6 H202 Na[Al(OH)4] + 3 H2
If 0.1068 g of H2 is produced, what is the mass percent of aluminum in the alloy?

Answers

Answer : The mass percent of Al in the alloy is 85.9 %.

Explanation : Given,

Mass of sample of an alloy  = 1.1181 g

Mass of [tex]H_2[/tex] = 0.1068 g

Molar mass of [tex]H_2[/tex] = 2 g/mol

Molar mass of [tex]Al[/tex] = 27 g/mol

First we have to calculate the moles of [tex]H_2[/tex].

[tex]\text{Moles of }H_2=\frac{\text{Given mass }H_2}{\text{Molar mass }H_2}[/tex]

[tex]\text{Moles of }H_2=\frac{0.1068g}{2g/mol}=0.0534mol[/tex]

Now we have to calculate the moles of [tex]Al[/tex]

The balanced chemical equation is:

[tex]2Al+2NaOH+6H_2O\rightarrow 2Na[Al(OH)_4]+3H_2[/tex]

From the reaction, we conclude that

As, 3 moles of [tex]H_2[/tex] produced from 2 moles of [tex]Al[/tex]

So, 0.0534 mole of [tex]H_2[/tex] produced from [tex]\frac{2}{3}\times 0.0534=0.0356[/tex] mole of [tex]CaCl_2[/tex]

Now we have to calculate the mass of [tex]Al[/tex]

[tex]\text{ Mass of }Al=\text{ Moles of }Al\times \text{ Molar mass of }Al[/tex]

[tex]\text{ Mass of }Al=(0.0356moles)\times (27g/mole)=0.9612g[/tex]

Now we have to calculate the mass percent of Al in the alloy.

Mass percent of Al in alloy = [tex]\frac{\text{Mass of Al}}{\text{Mass of sample of an alloy}}\times 100[/tex]

Mass percent of Al in alloy = [tex]\frac{0.9612g}{1.1181g}\times 100[/tex]

Mass percent of Al in alloy = 85.9%

Therefore, the mass percent of Al in the alloy is 85.9 %.

5A. Particles in a solid are closer/farther apart than they are in a liquid
or gas which are closer/farther apart.
5B. Conduction involves the collision of particles in less/more dense
materials collide less/more often than particles in less/more dense
materials. For example, solids conduct thermal energy faster/slower
than liquids or gases because the particles are closer or farther apart
and collide frequentiylrarely.

Answers

Answer:

Wait so what is the answer, before any one says any thing I knw this is Not a question so plz don't say nothing about it.

Explanation:

Particles in a solid are closer than they are in a liquid or gas which are farther apart. Conduction involves the collision of particles in more dense materials.For example, solids conduct thermal energy faster than liquids or gases because the particles are closer and collide frequently.

What is conduction?

Conduction is defined as a process as a means of which heat is transferred from the hotter end of the body to it's cooler end.Heat flows spontaneously from a body which is hot to a body which is cold.

In the process of conduction,heat flow is within the body and through itself.In solids the conduction of heat is due to the vibrations and collisions of molecules while in liquids and gases it is due to the random motion of the molecules .

When conduction takes place, heat is usually transferred from one molecule to another as they are in direct contact with each other.There are 2 types of conduction:1) steady state conduction 2) transient conduction.According to the type of energy conduction is of three types:

1) heat conduction

2) electrical conduction

3)sound conduction

Learn more about conduction,here:

https://brainly.com/question/12136944

#SPJ2

One type of atomic particle that is found in the nucleus does not contribute to
an element's atomic number. What are two characteristics of this type of
atomic particle?
A. Negative charge
B. Almost o amu
C. 1 amu
D. No charge

Answers

Answer:

In the middle of every atom is the nucleus. The nucleus contains two types of subatomic particles, protons and neutrons. The protons have a positive electrical charge and the neutrons have no electrical charge. D. No Charge

Explanation:

Answer:

C & D

Explanation:

Just took quiz and got it right! Hope this helps! <3

Given that the frequency of a wave is 9.12x10^-12 Hz, what must be the
wavelength? KEEP THREE SIGNIFICANT FIGURES

Answers

Answer:

The wavelength of wave is 0.33 ×10²⁰ m.

Explanation:

Given data:

Frequency of wave = 9.12×10⁻¹² Hz

Wavelength of wave = ?

Solution:

Formula:

Speed of light = wavelength × frequency

c = λ × f

λ = c/f

This formula shows that both are inversely related to each other.

The speed of light is 3×10⁸ m/s

Frequency is taken in Hz.

It is the number of oscillations, wave of light make in one second.

Wavelength is designated as "λ" and it is the measured in meter. It is the distance between the two crust of two trough.

Now we will put the values in formula.

λ = 3×10⁸ m/s  / 9.12×10⁻¹² Hz

Hz = s⁻¹

λ = 0.33 ×10²⁰ m  

The wavelength of radiation is 0.33 ×10²⁰ m  .

What is an example of a poly-gastric organism?

Answers

Answer:

cow, sheep, goats, deer, elk

What conclusion about bonding can be drawn from these diagrams?
A) In ionic bonding the valence electrons are combined while the valence electrons are electrostatically portioned during non-polar covalent bonding.
B) The valence electrons are shared between both atoms in covalent bonding while the valence electrons are completely transferred in ionic bonding.
C) Valence electrons reside in a sea of electrons in metallic bonding while valence electrons are permanently exchanged during crystalline bonding.
D) During amorphous bonding the valence electrons are unevenly shared between the atoms while the valence electrons are borrowed in polar covalent bonding.

Answers

Answer:

It’s b

Explanation:

I just did it on usatestprep

The valence electrons are shared between both atoms in covalent bonding while the valence electrons are completely transferred in ionic bonding. Hence, option B is correct.

What is a bond?

A chemical bond is what holds atoms together in molecules.

A covalent bond is a chemical bond that involves the sharing of electron pairs between atoms.

These electron pairs are known as shared pairs or bonding pairs, and the stable balance of attractive and repulsive forces between atoms, when they share electrons, is known as covalent bonding.

In the given diagram covalent bond is taking place.

Hence, option B is correct.

Learn more about the bond here:

https://brainly.com/question/14089750

#SPJ2

Is chloroform a polar molecule? How do you know?

Answers

Answer:

A polar molecule does not have an even distribution of electrons. ... Therefore Chloroform is a polar molecule because it does not have an even distribution of molecules, and one end is more negatively charged (Cl) than another (H).

Explanation:

You have an Iron atom with atomic mass 58 amu, how many neutrons
does it have?

Answers

Answer:

It has 32 neutrons

Explanation:

1.Which phase of matter will maintain a constant volume, but not a constant shape?

solid

liquid

Gas

plasma

Answers

Liquid is the right answer

What is the mass of a liquid with a density of 2.12 g/mL and a volume of
53.0 mL ?

Answers

Answer:

The answer is 112.36 g

Explanation:

The mass of a substance when given the density and volume can be found by using the formula

mass = Density × volume

From the question

volume of liquid = 53 mL

density = 2.12 g/mL

We have

mass = 2.12 × 53

We have the final answer as

112.36 g

Hope this helps you

40.3 degrees Fahrenheit. Each hour the temperature decreases by 2.09 What is the
temperature after 2 hours?

Answers

ANSWER

36.12 degrees fahrenheit

An organic compound of relative molecular mass 46,on analysis was found to contain 52.0% carbon, 13.3% hydrogen and 34.7% oxygen
(H=1,C=12,O=16)
calculate the empherical formulae and molecular formulae​

Answers

Answer:

Empirical formula is C₂H₆O.

Explanation:

Empirical formula:

It is the simplest formula gives the ratio of atoms of different elements in small whole number

Given data:

Percentage of hydrogen = 13.3%

Percentage of carbon = 52.0%

Percentage of oxygen = 34.7%

Empirical formula = ?

Molecular formula = ?

Solution:

Number of gram atoms of H = 13.3 / 1.01 = 13 .17

Number of gram atoms of O = 34.7 / 16 = 2.17

Number of gram atoms of C = 52.0 / 12 = 4.3

Atomic ratio:

            C                     :          H             :           O

           4.3/2.17            :     13.17/2.17     :       2.17/2.17

            2                      :        6               :        1

C : H : O = 2 : 6 : 1

Empirical formula is C₂H₆O.

Molecular formula:

Molecular formula = n (empirical formula)

n = molar mass of compound / empirical formula mass

n = 46 / 158

The relative molecular mass of compound is not correct.

Question 2
0.83 pts
Given that the specific heat of copper metal is 0.377 J/(g °C), how much heat is required to
increase the temperature of 2.00 g of copper metal by 1.00 °C?
O 1.51 L
O 2.377
O 0.189 J
0.377 J
O 0.754 J
Question 3
0.83 pts

Answers

Answer:

Option e is correct

The heat required to increase the temperature of copper metal by 1 degree is 0.754 j .

Explanation:

Given data:

specific heat of copper = 0.377 j/g.°C

Heat required to increase temperature = ?

Mass of copper = 2.00 g

Change in temperature = 1°C

Solution:

Specific heat capacity:

It is the amount of heat required to raise the temperature of one gram of substance by one degree.

Formula:

Q = m.c. ΔT

Q = amount of heat absorbed or released

m = mass of given substance

c = specific heat capacity of substance

ΔT = change in temperature

Q = m.c. ΔT

Q = 2 g× 0.377 j/g.°C × 1°C

Q = 0.754 j

The heat required to increase the temperature of copper metal by 1 degree is 0.754 j .

What is chromatography paper?​

Answers

Answer:

paper chromatography is an analytical method used to separate colored chemicals or substances.It is primarily used as a teaching tool,having been replaced by other Chromatography methods ,such as thin layer chromatography.


Why must chemical equations be balanced?
A:So that the chemical reaction doesn't explode
B:The reaction won't happen until it is balanced
C:Matter cannot be created or destroyed in a chemical reaction
D:None of these

Answers

Answer:

to validate the law of conservation of mass as total no. of reactants must be equal to the total no. of products

What is the mass number of the atom shown?

Answers

Answer:

21

Explanation:

Formula;

Mass number = number of protons + number of neutrons

= 9 + 12

= 21

The structures of TeF4 and TeCl4 in the gas phase have been studied by electron diffraction (S. A. Shlykov, N. I. Giricheva, A. V. Titov, M. Szwak, D. Lentz, G. V. Girichev, Dalton Trans., 2010, 39, 3245).
a. Would you expect the Te i X (axial) distances in these molecules to be longer or shorter than than Te i X (equatorial) distances? Explain briefly.
b. Which compound would you predict to have the smaller X(axial) i Te i X(axial) angles? The smaller X(equatorial) i Te i X(equatorial) angles? Explain briefly.

Answers

Answer:

See explanation

Explanation:

Two structures are pictured in the image attached, structure 2 is a more stable structure for TeF₄ or TeCl₄ since the lone pair in the structure is present at an equatorial position. Note that the structure of the compound is based on a trigonal bipyramid but of the structure type AX4E, where the lone pair could be positioned at axial or equatorial positions as shown in the images attached.

As a result of repulsion between electron pairs, the bond distance between Te - X(axial) is greater than Te-X (equatorial). This implies that the Te - X(axial) bonds are longer than Te - X(equatorial) bonds.

In answering the question, we must take cognisance of the fact fluorine is more electronegative than chlorine. This implies that fluorine will draw more electron density towards itself than chlorine and this shortens the bond length.

The structures of the both compounds are based on a trigonal bipyramid with a bond angle of 90° for axial position and 120° for the equatorial position.

Owing to the greater electo negativity of fluorine, both the fluorine F-axial and F-equatorial bonds of TeF4 are shorter than the Cl-axial and Cl-equatorial bonds of TeCl4. Hence the axial and equatorial angles in TeF4 are smaller than the axial and equatorial bond angles in TeCl4 due to the greater electro negativity of the fluorine atom.

FAST PLEASE HELP All atoms of the same element must have the same number of
O protons.
O neutrons.
O compounds.
O electrons.

Answers

All atoms have the same number of protons

Answer: A. Protons

Explanation:

What are the 4 parts of cell theory???? List like
1.
2.
3.
4.

Answers

Answer:

1. Cells contain DNA that is passed cell to cell during cell divison.

2. Cells are similiar in chemical composition and reactions that maintin homeostasis.

3. All basic chemical and physiological functions are carried out inside the cell.

4. Cell activity depends on the oragnelles withen the cell.

Hope this helps!

Plants need sunlight to make food during the process of:
Photosynthesis

Respiration

Nuclear fusion

Digestion

Answers

the answer is  photosynthesis

it is a way of thinking about the world, and is made up of a person's views and belief​

Answers

Incomplete question. I inferred you want the term that fits this definition.

Answer:

A Worldview

Explanation:

Having a Worldview refers to an individual's perception or the way one thinks about the world, influenced by their attitudes and values.

This view of the world is made up of a person's views and beliefs which form their expectations about the world in which they live.

The pale yellow liquid bromine pentafluoride reacts violently with water to give a mixture of bromic acid and hydrofluoric acid .

(a) Write a balanced chemical equation for this reaction.

BrF5 + 3H2O HBrO3 + 5HF

(b) Determine the concentration (in moles per liter) of each of the acids that result from the complete reaction of 5.40×10-2 moles of bromine pentafluoride with enough water to give a solution volume of 783 mL.

bromic acid : ________M

hydrofluoric acid : ___________M

Answers

Answer:

The concentration of bromic acid (HBrO₃) is 0.069 moles/L

the concentration of hydrofluoric acid (HF) is 0.345 moles/L

Explanation:

(a) The balanced chemical equation for the reaction is

BrF₅ + 3H₂O → HBrO₃ + 5HF

The chemical equation is balanced

(b) To determine the concentration of each acids,

First, we will determine the different volume of the acids yielded

The solution volume is 783 mL = 0.783 L

From the balanced chemical equation,

1 mole of BrF₅ produces 1 mole of HBrO₃

Likewise, 1 mole of BrF₅ will produce 5 moles of HF

From the question,

5.40×10⁻² moles of bromine pentafluoride (BrF₅) reacted;

Hence, 5.40×10⁻² moles of HBrO₃ will be produced

and 5 × 5.40×10⁻² moles of HF will be produced.

Number of moles of HBrO₃ produced = 5.40×10⁻² moles

and Number of moles of HF produced = 2.7 × 10⁻¹ moles

From the formula,

Number of moles (n) = Concentration (C) × Volume (V)

Then,

Concentration (C) = Number of moles (n) / Volume (V)

For bromic acid (HBrO₃)

n = 5.40×10⁻² moles

Volume = 0.783L

Hence,

C = 5.40×10⁻² moles / 0.783L

C = 0.069 moles/L

This is the concentration of bromic acid (HBrO₃)

For hydrofluoric acid (HF)

n = 2.7 × 10⁻¹ moles

V = 0.783L

Hence,

C = 2.7 × 10⁻¹ moles / 0.783L

C = 0.345 moles/L

This is the concentration of hydrofluoric acid (HF)

A balloon is filled with a gas and has a volume of 1.79 L at 2.82 atm pressure. What will its volume be if
the pressure is changed to 5.30 atm?

Answers

Answer:

The answer is 0.95 L

Explanation:

In order to find the volume when the pressure is changed to 5.30 atm we use Boyle's law which is

[tex]P_1V_1 = P_2V_2 \\[/tex]

where

P1 is the initial pressure

P2 is the final pressure

V1 is the initial volume

V2 is the final volume

Since we are finding the final volume

[tex]V_2 = \frac{P_1V_1}{P_2} \\ [/tex]

From the question

P1 = 2.82 atm

V1 = 1.79 L

P2 = 5.30 atm

So we have

[tex]V_2 = \frac{2.82 \times 1.79}{5.3} \\ = 0.9524150943...[/tex]

We have the final answer as

0.95 L

Hope this helps you

Other Questions
DISCUSSION QUESTIONS (DQ's). Read the case study on McDonaldson p. 453. How has McDonalds used public health issues in itscompetitive campaign. in ECN 500 Managerial Economics A building with a book value of $ 45,000 is sold for $50,000 cash. Using the indirect method, this transaction should be shown on the statement of cash flows as follows:a.an increase of $45,000 from investing activitiesb.an increase of $50,000 from investing activities and a deduction from net income of $5,000c.an increase of $50,000 from investing activitiesd.an increase of $45,000 from investing activities and an addition to net income of $5,000 6. Suppose Credit Suisse quotes spot and 90-day forward rates on the Swiss franc of $0.795060,84. a) What are the outright 90-day forward rates that credit Suisse is quoting? b) What is the forward discount or premium associated with buying 90-day Swiss Francs? c) Compute the percentage bid-ask spreads on spot and forward Swiss Francs? According to a research study by the Children's Hospital of Philadelphia, one-quarter of all motor vehicle accidents that involve children under age 12 are side-impact crashesand these crashes result in higher rates of injuries and fatalities than those with front or rear impacts. You work in the consumer information department at Britax, a leading manufacturer of car seats. Your manager has asked you to prepare an email message that can be sent out whenever parents request information about side-impact crashes and the safety features of Britax seats.Write a 34 paragraph email that explains why side-impact crashes are so dangerous and describes how Britax's car seats are designed to help protect children in side-impact crashes. Include a subject line in your e-mail. MyCarShop is a chain of used car-dealers with showrooms in Leicester, Derby and Chesterfield and a separate Head Office. The management accountant is reviewing the profitability of each showroom. The rent and staff costs incurred by each showroom can be saved in the event of closure. Marketing costs are allocated to each showroom, but would not be saved, if any shop were to close. Head office cost is charged at a rate of 7% of sales. The data regarding costs and sales revenues for each showroom are presented below. 000 Leicester Derby Chesterfield Sales 1,500 1,375 1,230 Cost of sales 1,250 1,240 1,184 Rent of 50 67 78 showroom Showroom staff 21 28 12 salaries Marketing costs 45 22 18 (a) What is the total relevant cost and attributable profit for each showroom? (b) Explain which, if any, of the showrooms should be closed down? Please state all assumptions Which of the following statements is the definition for market development strategy? Employs the existing marketing offering to reach new market segments, whether domestic or international. B) Offers a new product or service to a firm's current target market. (C) Employs the existing marketing mix and focuses the firm's efforts on existing customers. D Introduces a new product or service to a market segment that is currently not served. Which of the following sentences is an example of acompound-complex sentence?summit 1-4B More Complex Financial Statements Ragequit PC Repair specializes in computer equipment repair following incidents of "gamer rage". After losing online games some gamers enter a fit of irrational rage, and break gaming controllers, monitors, notebook computers, mice, keyboards and televisions*. This rage has been lucrative for the Ragequit PC Repair. The following account balances relate to the companys November 30, 2024 year-end financial statements: Bank loan payable 4,000 Income tax expense 200 Interest expense 250 Repair revenue 55,000 Dividends 700 Accounts payable 400 Common shares (Dec 1, 2023) 50 Rent expense 8,500 Wages expense 38,000 Accounts receivable 100 Supplies 1,200 Accumulated depreciation tools and equipment 1,500 Supplies expense 5,000 Cash 900 Tools and Equipment 6,000 Notes payable 800 Retained earnings (Dec 1, 2023) 500 Depreciation expense 1,400 Notes: x There were no common shares issued or repurchased during the year. x The current portion of the bank loan payable was $600. Required: a.) Prepare an income statement for the year ended November 30, 2024. b.) Prepare a statement of changes in equity for the year ended November 30, 2024. c.) Prepare a balance sheet as at November 30, 2024. d.) Based on your financial statements, compute: i. The current ratio ii. The debt ratio iii. The equity ratio *Like when your opponent (who had unbelievable RNG luck the whole game) top-decks the exact card he needed to beat you, even though you outplayed him, and are clearly smarter and better than him. Ridiculous. Hearthstone is for babies. You must complete 2 Business documents. 1 Memorandum 1 Persuasive Email can u please have help i cant get this Match the tiles to create sentences that include two related ideas.Because my mom is a dentist,I will see the clowns.When I go to the circus,I am not allowed to play video games.Until I finish my homework,I never have to pay for toothpaste.After I make the tomato sauce,I will cook the pasta. The average sea level in 1920 at the London bridge was 33 feet. in 1925 it was 33.08 feet.Use linear interpolation or extrapolation to find what the average sea level was in 1928. Describe the requirements for ingredient brand and state howsuccessful Intel has been in its ingredient branding. Which of the following are disadvantages of a transnational system? Check all that apply. a Production scale economies may be too low to make the product profitably. b Clients in different locations may have different tastes in products. c It may be difficult to choose which strategy to adopt for which environment. d The company can spend large amounts of money implementing many diverse strategies. Which tool is generally used to compare the masses of objects? *1 pointA meter stickA two-pan balanceA hot plateA graduated cylinder Assume a company started and completed numerous jobs during Julytwo of which were Job Y and Job Z. The company uses two departmental predetermined overhead rates. The rate in the Machining Department is based on machine-hours and the rate in the Assembly Department is based on direct labor-hours. The following additional information from the month of July is available for the company as a whole and for Jobs Y and Z:Machining AssemblyEstimated total fixed manufacturing overhead $ 48,000 $ 25,400Estimated variable manufacturing overhead per machine-hour $ 1.50 Estimated variable manufacturing overhead per direct labor-hour $ 2.00Estimated total machine-hours to be used 12,000 Estimated total direct labor hours to be worked 10,000Machining AssemblyJob Y Machine-hours 50 Direct labor-hours 30Job Z Machine-hours 40 Direct labor-hours 60What is the predetermined overhead rate in the Assembly Department?$3.54$4.54$5.04$4.04 Goods on order from a supplier A. Not InventoryB. Inventory Revenue OC. Depends on Shipping term if it is FOB Destionation or FOB Shipping point PLZ SHOW WORK ASAP!!!!A photograph of an elephant has a scale of 1 cm representing 0.5 m. The elephant's trunk in the photograph measures 4.1 cm.What is the actual length of the elephant's trunk? 1. 8.2 m 2. 2.04 m 3. 2.05 m 4. 2.08 m If the price elasticity of demand for coffee is 0.25, what should we expect would happen to consumption of coffee if the price (of coffee) increases by 10%?A.Consumption of coffee should increase by 25%.B.Consumption of coffee should decrease by 25%.C.Consumption of coffee should increase by 2.5%.D.Consumption of coffee should decrease by 2.5%. Please discuss the implications of increasing fuel costs onsupply chain design. How can global firms mitigate the impact ofincreased fuel prices?