Answer:
D. Microwave, Blue Visible Light, Ultraviolet, Gamma
Explanation:
colors longest to shortest are
red green blue violet
longest wavelength to shortest:
radio waves, microwaves, infrared, optical, ultraviolet, X-rays, and gamma-rays.
How many grams of Br are in 345g of CaBr2?
Answer:
276g of Br are present
Explanation:
To solve this question we need to find the moles of CaBr2 using its molar mass -CaBr2: 199.89g/mol-. As 1 mole of CaBr2 contains 2 moles of Br we can find the moles of Br and its mass:
Moles CaBr2:
345g * (1mol/199.89g) = 1.7259 moles CaBr2
Moles Br:
1.7259 moles CaBr2 * (2mol Br / 1mol CaBr2) = 3.4519 moles Br
Mass Br -Molar mass: 79.904g/mol-
3.4519 moles Br * (79.904g/mol) = 276g of Br are present
The formal charge and P-O bond order in PO43- respectively are 0.6, -0.75 -0.75, 1.25 1.0, -0.75 1.25, -3 98.
Answer:
-0.75 , 1.25
Explanation:
Number of electrons present in valence shell,
P-O = 5 + 8 = 13
Number of electrons involved in bond formation,
13 - 3 = 10
Number of bonds in PO3 - 4ion = 102
Average P-O bond = 1.25
Average formal charge on Oxygen atom is -0.75
How do you think you results would be affected if using K2Cr2O7/H2SO4 as the oxidizing agent instead of KMnO4
Answer:
Due to weak oxidizing agent.
Explanation:
In my opinion the results would be affected if using K2Cr2O7/H2SO4 as the oxidizing agent instead of KMnO4 because K2Cr2O7/H2SO4 is weak oxidizing agent as compared to KMnO4. An oxidizing agent is a substance that has the ability to oxidize other substances means that accept their electrons so that's why the results of strong oxidizing agent is different than weak oxidizing agent.
The results of the reaction will be affected due to the difference in :
Oxidizing agent strength
The use of K₂Cr₂O7 / H₂SO₄ which is weaker oxidizing agent in the reaction will produce a different result from the use of KmnO₄ which is a stronger oxidizing agent.
This is because stronger oxidizing agents in reaction readily accept electrons from reactants while weaker oxidizing agents do not readily accept electrons from substances reacting in the reaction.
Therefore we can conclude that The results of the reaction will be affected due to the difference in oxidizing agent strength
Learn more : https://brainly.com/question/16450420
Although your question is incomplete a general solution is provide within the scope of your question
The nonmetals include which of the following groups? Use the periodic table to answer the question. Check all that apply.
halogens
alkali metals
lanthanides
noble gases
alkaline earth metals
Answer:
En el grupo de los no metales se incluyen los halógenos (flúor, cloro, bromo, yodo, astato y téneso), que tienen 7 electrones en su última capa de valencia y los gases nobles (helio, neón, argón, kriptón, xenón, radón), que tienen 8 electrones en su última capa (excepto el helio, que tiene 2).
Explanation:
halógenos
Answer:
1,4
Explanation:
A new element R shows chemical properties similar to the element sodium. What is the correct formula of a compound formed with R and sulfur?
R₂S
RS₂
RS
R₂S₂
Answer:
R2S this is because sodium has one 1 valence and sulfur has valence of 2 so when they combine theyinterchange their valence
 Help ASAP only right answers only no spam don’t answer if you don’t know
…..
Answer:
Inference
Explanation:
I mean, it's not difficult.
A theory is an unproven explanation.
An inference is a guess/educated guess where you don't have all the facts.
For example, if "Bob" is caught in the kitchen with a ketchup stain on his shirt, you are inferencing that he used the ketchup.
However, if you see a ketchup bottle nearby or saw it earlier, then it is not, because you already have the facts that ketchup was used.
Atoms are:
O A. One of the 4 elements that matter is composed of.
B. Connected by bonds to form compounds.
OC. The basic building blocks of matter.
O D. Heterogeneous and refer to color, texture, and appearance.
Reset Selection
Answer:c
Explanation: atoms make matter
Atoms are the basic building blocks of matter. The correct option is C.
What are atoms?Atoms are the basic unit and building block of matter. They are the smallest unit, but they can be divided. They do not emit charge on dividing into the further, the smallest parts.
Atoms are further divided into electrons, protons, and neutrons. They are the charged particles that revolve in the shell of the atom. A nucleus is also present in the between of the atom.
Atoms are considered the building blocks of matter, as all matter is made up of many atoms. The configuration of the atom defines the state of matter.
Thus, the correct option is C. The basic building blocks of matter.
To learn more about atoms, refer to the link:
https://brainly.com/question/1566330
#SPJ5
How is the relation between the volume and temperature? Explain.
There are two types of automatic exposure control: photodiode and the more common parallel plate ionization chamber. How are they positioned
Answer:
Following are the response to the given question:
Explanation:
In the given question the automatic exposure is used as the management which is offered in two distinct methods: photodiode as well as the parallel ionizing tank. In both are positioned as the absolute pressure type is between the patient as well as the receptor, behind the image receptor the photoelectric is placed.
2. Find the slope of the line that passes between the points (12,5) and (2,3).
Write your formula for Slope
m=y2 −y1/x2-x1
Explanation:
3-5/2-12=1/5
what is the difference between physical chemistry and environmental chemistry.
please Answer and give the correct answer...
Answer:
Physical chemistry is the study of macroscopic, and particulate phenomena in chemical systems in terms of the principles, practices, and concepts of physics such as motion, energy, force, time, thermodynamics, quantum chemistry, statistical mechanics, analytical dynamics and chemical equilibrium while environmental chemistry is the study of chemical processes that occur in water, air, terrestrial and living environments, and the effects of human activity on them.
Physical chemistry is the area of chemistry that deals with how materials interact and change. The scientific study of chemical and biological phenomena that take place in the environment is known as environmental chemistry.
Physical chemistry attempts to quantify, correlate, and explain the quantitative features of reactions by focusing, in contrast to other branches, on the physics principles that underlie all chemical interactions (such as the gas laws).
While environmental chemistry is the study of chemical species' sources, reactions, movement, impacts, and fates in the air, soil, and water environments, as well as the impact of human activity and biological activity on these, can be summed up as the field of chemical ecology.
To learn more about environmental chemistry visit;
https://brainly.com/question/25046469
https://brainly.com/question/22517940
during the extraction of iron from iron oxide in the Blast Furnace state the function of limestone
Answer:
Redox reactions are involved in the extraction of metals from their ores, eg extracting iron by reduction within the blast furnace. Transition metals have high melting points and densities, form coloured compounds and act as catalysts
What are two factors that determine the concentration of hydronium (or hydroxide) ions in an acid (or base) solution?
Answer:
hydronium and hydroxide ions are present both in pure water and in all aqueous solutions, and their concentrations are inversely proportional as determined by the ion product of water (Kw). The concentrations of these ions in a solution are often critical determinants of the solution’s properties and the chemical behaviors of its other solutes, and specific vocabulary has been developed to describe these concentrations in relative terms. A solution is neutral if it contains equal concentrations of hydronium and hydroxide ions; acidic if it contains a greater concentration of hydronium ions than hydroxide ions; and basic if it contains a lesser concentration of hydronium ions than hydroxide ions.
Answer:
hydronium and hydroxide ions are present both in pure water and in all aqueous solutions, and their concentrations are inversely proportional as determined by the ion product of water
Explanation:
Not my work! I hope this helps!
cual es el tamaño de partícula del alcohol
Answer:
Las botellas de alcohol vienen en una variedad de tamaños. El estándar es de 750 ml, que también se conoce como "un quinto" porque es 1/5 de galón. Otros tamaños comunes de botellas de alcohol son 50ml, 100ml, 200ml, 375ml, 1L y 1.75L.
Explanation:
Un medicamento corresponde a una disolución de "nafazolina" (sustancia activa) en agua purificada, en una concentración de 12% V/V. - EXPLICA cuánto soluto hay por cada 100mL del medicamento.
Answer:
12 mL
Explanation:
Según la pregunta;
V / V% concentración del fármaco = 12%
volumen de la solución = 100 ml
De;
V / V% = volumen de fármaco / volumen de solución
volumen de fármaco = V / V% × volumen de solución
volumen de fármaco = 12/100 × 100
= 12 mL
define all the physical features of earth
MOUNTAINS
Mountains are large, tall, and elevated land areas on the earth's surface. They have steep, sloping sides and sharp or rounded ridges, and a high point, called a peak.
PLAINS
Plains are one of the major landforms on earth. They are areas of flat lands.
PLATEAUS
A plateau is a flat, elevated landform that rises above the surrounding area.
DESERTS
Regions of dry, arid lands.
DELTAS
A river delta is a landform created by deposition of sediment that is carried by a river as the flow leaves its mouth and enters slower-moving or stagnant water.
Si 40 g de un compuesto C6H10O5 se disuelven en 500 g de agua, determine el punto de ebullición de esta solución. (Agua: temperatura de ebullición 100 °C y Ke = 0,52 °C/m)
The question is: If 40 g of a compound C6H10O5 are dissolved in 500 g of water, determine the boiling point of this solution. (Water: boiling temperature 100 ° C and Kb = 0.52 ° C / m).
Answer: The boiling point of given solution is [tex]100.256^{o}C[/tex].
Explanation:
Given: Mass of solute = 40 g
Mass of solvent = 500 g (1 g = 0.001 kg) = 0.5 kg
[tex]K_{b} = 0.52^{o}C/m[/tex]
Molality is the moles of solute present in kg of solvent.
Moles is the mass of substance divided by its molar mass. Hence, moles of [tex]C_{6}H_{10}O_{5}[/tex] (molar mass = 162.141 g/mol) is calculated as follows.
[tex]Moles = \frac{mass}{molar mass}\\= \frac{40 g}{162.141 g/mol}\\= 0.246 mol[/tex]
Now, molality of the solution is calculated as follows.
[tex]Molality = \frac{molesof solute}{mass(in kg)}\\= \frac{0.246}{0.5 kg}\\= 0.492 m[/tex]
The boiling point is calculated as follows.
[tex]\Delta T_{b} = K_{b}m[/tex]
where,
m = molality
Substitute the values into above formula as follows.
[tex]\Delta T_{b} = K_{b}m\\= 0.52^{o}C/m \times 0.492 m\\= 0.256^{o}C[/tex]
As the boiling point of water is 100 degree Celsius. So, the boiling point of solution is as follows.
[tex](100 + 0.256)^{o}C\\= 100.256^{o}C[/tex]
Thus, we can conclude that the boiling point of given solution is [tex]100.256^{o}C[/tex].
Which of the following pairs lists a substance that can neutralize Ca(OH)2 and the salt that would be produced from the reaction?
HCl and CaCl2
HClO and CaHClO
H2O and Ca(OH)3
H3PO4 and Ca(PO3)2
Answer:
Which of the following pairs lists a substance that can neutralize Ca(OH)2 and the salt that would be produced from the reaction?
HCl and CaCl2
HClO and CaHClO
H2O and Ca(OH)3
H3PO4 and Ca(PO3)2
Explanation:
The given substance is Ca(OH)2 which is a base.
To neutralise a base an acid is required.
Among the given options,
HCl and H3PO4 are the acids.
The salts foremd when calcium hydroxide reacts with the respective acids are CaCl2 and Ca3(PO4)2.
But among the given options, only the forst option that is
HCl and CaCl2 shows the correct formulas.
Hence, the answer is first option.
Answer:
HCl and CaCl2
Explanation:
describe the formation of covalent bond in methane (5 marks)
Answer: Covalent bonding is when atoms of different elements share electrons
Explanation: Taking Methane CH₄
it contains Hydrogen and Carbon atoms pairing electrons. the electronic configuration for carbon is 2,4 that is to say it has 4 electrons in its valence shell (outer shell) and hydrogen has 1 so carbon shares its four electrons with four hydrogen atoms thus forming a covalent bond. so they now have a stable arrangement of electrons in their outer shell ,thus giving CH₄There are two types of chemical compound one is covalent compound and other is ionic compound, covalent compound formed by sharing of electron and ionic compound formed by complete transfer of electron. Therefore, sharing of electron is the only basis for the formation of covalent bond in methane.
What is chemical Compound?Chemical Compound is a combination of molecule, Molecule forms by combination of element and element forms by combination of atoms in fixed proportion.
Carbon has an electrical configuration of 2,4. Hydrogen only has one electron in its valence shell, whereas carbon contains four electrons. In order to create methane, carbon forms a covalent connection with four hydrogen atoms, sharing its four electrons with them.
Therefore, sharing of electron is the only basis for the formation of covalent bond in methane.
To learn more about chemical compound, here:
brainly.com/question/26487468
#SPJ2
What is the balance equation for
_ Ba + _ HNO3 —> _ H2 + _ Ba(NP3)2
_ H3PO4 + _ NaOH —> _ H2O + _ Na3PO4
1st one
2_2_2
2nd one
3_1_1_3
i looked it up
an experiment was carried out and H2SO4 was collected resulting in a 92.0% yield. What mass of H2SO4 was collected from the experiment?
Answer:
The mass of H2SO4 collected is 92.0g assuming the theoretical yield of H2SO4 is 100g
Explanation:
Assuming the theoretical yield of the sulfuric acid, H2SO4, is 100g.
To solve this question we must use the equation of percent yield:
Percent yield = Actual yield / Theoretical yield * 100
Where percent yield = 92.0%, actual yield is the mass of H2SO4 produced and theoretical yield is 100g, the mass we are assuming
Replacing:
92.0% = Actual yield / 100g * 100
92.0g = Actual Yield
The mass of H2SO4 collected is 92.0g assuming the theoretical yield of H2SO4 is 100g2. As NH4OH is added to an HCl solution, the pH of the solution
A) increases as the OH- concentration decreases
B ) increases as the OH- concentration increases
C ) decreases as the OH- concentration decreases
D ) decreases as the OH- ion concentration increases
Answer:
c
Explanation:
Nh4OH + HCL ---> NH4Cl + H3O
so ph decreases as H3O increases
and OH also decreases
When NH4OH is added to a solution with HCI, the pH of the solution B ) increases as the OH- concentration increases.
Why would the solution increase?NH₄OH is a strong base as a result of the presence of the OH compound which is a base as well. Bases have high pH and acids have low pH.
This means that as the OH- concentration increases, the solution is being made to be more basic which would lead to the pH rising.
In conclusion, option B is correct.
Find out more on Bases at https://brainly.com/question/15565260.
ASAAPPP NEED HELP IF ANYONE IS AROUND
i. Using carbon skeletal notation, write the dehydration-condensation reaction that occurs between ethanol and butanoic acid.
ii. What is the name of this ester?
Answer:
In the esterification reaction, an OH from the molecule acid and H from the alcohol form a molecule of water.
Ethanol and butanoic acid forms ethyl butanoate
How many moles of water vapor are formed. when 10 litres of butane gas c4h10 is burned in oxygen at STP
Using the idea of the molar volume of butane gas, we have 2.23 moles of water vapor.
What is a reaction equation?The term reaction equation shows the conversion of reactants to products. First of all, we must get down the reaction equation as follows;
C4H10(g) + 13/2O2(g) ----> 4CO2 (g) + 5H2O(g)
From the balanced reaction equation;
1 mole of butane gas yields 5 moles of water vapor. Since 1 mole of butane gas occupies 22.4 L. Hence;
22.4 L of butane yields 5 moles of water vapor
10 L of butane gas yields 10 L * 5 moles/22.4 L = 2.23 moles
Learn more about butane gas:https://brainly.com/question/6665698
what is a saturted solution
Answer:
Please find the definition and further explanation below
Explanation:
Based on the ability for the solvent (liquid substance) to dissolve a solute (solid substance), a solution can either be unsaturated, saturated or supersaturated. A SATURATED SOLUTION is that which contains the maximum amount of solute a solvent can possibly dissolve.
In other words, a saturated solution can no longer dissolve anymore solute, and hence, any further solute added forms crystals or makes the solution supersaturated.
What is the cause of acid precipitation?
1) ozone
2) nitrogenous oxides
3) ammonia
4) chlorofluorocarbons (CFCs)
Answer:
nitrogenous oxides
Explanation:
Acid rain is caused by a chemical reaction that begins when compounds like sulfur dioxide and nitrogen oxides are released into the air. ... In addition, the exhaust from cars, trucks, and buses releases nitrogen oxides and sulfur dioxide into the air. These pollutants cause acid rain.
The correct answer in you question is 2) nitrogenous oxide
I hope it helps ●~●
#CarryOnLearningWhat is the name of the process manufacturers use to make unsaturated fatty acids more solid at room temperature and prevent oxidation.
Answer:
Hydrogenation
Explanation:
Look up the definition to confirm
What type of soil has the finest of all the soil particles, measuring fewer than 0.002 millimeters in size?
Answer:
Clay soil
Explanation:
There are basically three types of soil namely: Sandy soil, clayey soil and loamy soil. Each of this soil type possess their own distinguishing characteristics. For example, on the basis of particle size and texture, CLAY SOIL possesses the smallest and finest particles.
Particles in a clay soil weighs lesser than 0.002 millimeters (mm) in size, making it have a high water holding or retention capacity.
What does physics study
Answer:
Physics is the branch of science that deals with the structure of matter and how the fundamental constituents of the universe interact. It studies objects ranging from the very small using quantum mechanics to the entire universe using general relativity.
(b) Which of the following is a mixture?
A.Sodium chloride solution
B.Sodium chloride
C.Sodium
D.Chlorine
Answer:
a
Explanation:
Mixture is a combination of two or more elements and sodium is an element with a chemical symbol Na and a charge of +1 and chloride too is an element with a chemical symbol Cl and a charge of -1 so when these two elements are combine it form a chemical solution called Sodium chloride
