Answer:
Throughout the section below, the types of traffic volumes are defined.
Explanation:
Annual average daily traffic:
It should be the maximum amount of even more right side or state highway traffic congestion like that for a year subdivided somewhat by 365 days. This would be a straightforward and therefore beneficial way of measuring where and how preoccupied this same street is.Annual average weekday traffic:
This becomes closely related to AADT but only contains information from Monday through Friday. Employee benefits were mostly disqualified from either the computation including its AAWT.Average summer daily traffic:
It is indeed a way of measuring analogous to something like the estimated yearly traffic levels. The methodologies of both are immediately clear the similar, but the ASDT information has only been obtained mostly during the summer seasons.Average daily traffic:
This should be the appropriate cost of 2 sided vehicles passing via a simple comment in something like twenty hours, generally calculated all year round.A 35 ft long solid steel rod is subjected to a load of 8,000 lb. This load causes the rod to stretch 0.266 in. The modulus of elasticity of the steel is 30,000,000 psi. Determine the diameter of the rod. (precision of 0.00)
Answer:
53.67
Explanation:
Explain two reasons why the employment growth for environmental science and protection technicians is expected to grow at a faster than average rate from 2010 to 2020.
Answer:
Civil Engineers
Marine Engineers
Mapping Technicians
Product Safety Engineers
Explanation
I did the instruction
Hope this helps
Answer:
1,2,5,6
Explanation:
The person above is correct.
a coil consists of 200 turns of copper wire and has a cross-sectional area of 0.8mm square . The mean length per turn is 80 cm and the resistivity of copper is 0.02 ohm at normal working temperature . calculate the resistance of the coil
Answer:
The picture below with the answer. Hope it helps, have a great day/night and stay safe! Length of the coil,
Would you recommend Apple Watch Series 6? Why or why not
Answer:
Yes.
Explanation:
If you never got an Apple Watch before this is the best and newest thing. It tells heart rate, sleep rate, GPS, audio, High noise awareness, and more. Also is faster than its predecessors.
Proper handling of blueprints includes which of the following
A.Folding plans neatly after use
B. Using plans to wipe off hands
C. Allowing anyone to mark-up the plans
D. None of the above
Answer:
folding plans neatly after use
Design drawings use line styles of up to eight different varieties to communicate important information about the item. true or false
Answer:
False
Explanation:
According to the American National Standard for Engineering Drawings, there are ten (10) different types of lines used in engineering drawings to communicate important information about the item. Some of these lines could either be thick or thin. These include the following:
1. Visible Line
2. Hidden Line
3. Section Line
4. Center Line And Symmetry Line
5. Dimension Line Extension Line And Leader
6. Cutting-Plane Line Or Viewing-Plane Line
7. Break Line
8. Phantom Line
9. Stitch Line
10. Chain Line
if a wire has 23.6 A of current and a resistance of 33.3Ω how much voltage is present?
Answer:785.9
Explanation:
Voltage is equal to the current multiplied by the current
V = RI
I need help!!!!!!!!!
The piece to connect a light strip to another light strip is broken. Is there a way to fix that piece??
Answer:
buy a new one
Explanation:
go on newegg and you will most likely find one there
1.identify two major inventions or innovations related to each engineering and technology pathway
Explanation:
Things related to engineering:
- Electric Motor
- Combustion Engine
Hope this helped!
what is 78 divided by 6318 explain in long division PLS
Answer:
78
Explanation:
6318 78 = 81
81 = 810 to the nearest tenth
81 = 81 to the nearest hundredth
81 = 81 to the nearest thousandth
= 0 to the nearest tenth
= 0 to the nearest hundredth
= 0 to the nearest thousandth
might be wrong
Which of the following distinguishes how participation in an internship program benefits someone wishing to be a music editor?
It provides an opportunity to learn audio conversion techniques.
It provides practical application of music theory
It provides professional experience in the industry.
It provides an opportunity to learn standards for operating equipment.
Answer:
The correct option is;
It provides professional experience in the industry
Explanation:
A music editor job role involves the putting together, appropriate editing, and the synchronization of the music used as soundtrack to a film so as to accomplish the film director's musical goal for the film
An internship is a form of work experience which students and graduates in take part in within an organization within a related or desired industry, so as to gain important experience in a particular field and also to acquire skills
Music editing, which requires the completion of a bachelor's, can require internships which provides professional experience in the industry for music editor.
Answer:
the other person is correct.
Explanation:
I took the stem test and got it right.
Hii
Can someone please help me!
I am supposed to do an egg incubator for science class, and I dont really know what to do.
Here are the criterias:
Must be small
portable
lightweight
keep eggs the right temperature
keep eggs protected from damage
keep eggs in same position.
Answer:Make an small diy holder that has heat packs keeping the egg warm and get something to cushion the egg so its protected from damage and get something to keep the eggs steady.
Explanation:You have to build it yourself and get all supplies and figure out how to put it together. I wish you the best of luck and merry christmas
how do you think the launch of the Sputnik satellites helped fuel the United States’ space exploration endeavors?
Answer:
The National Aeronautics and Space Administration began in 1958 as a reaction to Sputnik and as a means for turning missiles into launch vehicles for America's civilian space efforts. President Eisenhower opposed sending men to the moon, but his successor, John F. Kennedy, made a lunar landing a national priority.Nov 5, 2007
Explanation:
W
"The brave men, living and dead, who struggled here, have consecrated it, far above our poor power to add or detract."
—“The Gettysburg Address,”
Abraham Lincoln
Which quotation correctly uses an ellipses?
“The brave men, living and dead, who struggled here, have consecrated it, far above. . . .”
“The brave men . . . who struggled here, have consecrated it, far above our poor power to detract.”
“The brave men . . . who struggled here. . . .”
“The brave men . . . far above our poor power to add or detract.”
Answer:
c
Explanation:
because I took it in my state test
Answer:
its b
Explanation:
Which of the following blocks would be considered a "loop"? * 1 point when run when run repeat 5 times do move forward turn left u Option 1 Option 2 when run turn left u when run move forward move forward turn left u O Option 4 Option 3 0 points What is your class period?
Explanation:
The only issue with this is that I'm not a coding master like most people.
I'd guess and say that it's option 2 because of the repeat 5 times box.
I (really) hope this helped.
Answer: option 2: when run, repeat 5 times, move forward
Explanation: “repeat 5 times” makes it a loop
True or False - Blueprints can be drawn both by hand and on a computer
Answer:
The answer is true.
Explanation:
Most of it is done in computer, but it can also be drawn out by hand.
Answer:
This is definitely true. Though, I recommend doing it by Computer!
Explanation:
How Does A Shoe Box Solar Cooker Work?
PLEASE EXPLAIN IN YOUR OWN WORDS/MAKE IT SIMPLE
20 POINTS!!!!!
Answer:
the sun gives off light while at the same time gives off heat. the shoe box cooker takes that heat and light and reflects it around the shoe box. then the heat settles down into whatever is in the shoe box. the heat after being reflected around the shoe box is magnified by the foil wrapped in the box thus allowing the food or drink to be heated. the foil is a conductor of heat because it is metal .
Explanation:
hope this helps!
Consider coaxial, parallel, black disks separated a distance of 0.20 m. The lower disk of diameter 0.40 m is maintained at 500 K and the surroundings are at 300 K. What temperature will the upper disk of diameter 0.20 m achieve if electrical power of 17.5 W is supplied to the heater on the back side of the disk?
Answer:
In this picture is the answer
Explanation:
Yeah, I'm gonna take my horse to the old town road
I'm gonna ride 'til I can't no more
I'm gonna take my horse to the old town road
I'm gonna ride 'til I can't no more (Kio, Kio)
I got the horses in the back
Horse tack is attached
Hat is matte black
Got the boots that's black to match
Ridin' on a horse, ha
You can whip your Porsche
I been in the valley
You ain't been up off that porch, now
Can't nobody tell me nothin'
You can't tell me nothin'
Can't nobody tell me nothin'
You can't tell me nothin'
Ridin' on a tractor
Lean all in my bladder
Cheated on my baby
You can go and ask her
My life is a movie
Bull ridin' and b**bies
Cowboy hat from Gucci
Wrangler on my b**ty
Can't nobody tell me nothin'
You can't tell me nothin'
Can't nobody tell me nothin'
You can't tell me nothin'
Yeah, I'm gonna take my horse to the old town road
I'm gonna ride 'til I can't no more
I'm gonna take my horse to the old town road
I'm gonna ride 'til I can't no more
I got the
Answer:
hores in the back
old town road
Is the science of measurement
Answer:
yes
Explanation:
Answer:
Metrology, officially defined as the “science of measurement and its application” (JCGM 2012: 2.2), is a field of study concerned with the design, maintenance and improvement of measuring instruments in the natural sciences and engineering.
Explanation:
yes it is!!!
Which of the following is NOT a common problem or mistake with blueprints?
A.Illegible writing
B. Using the most current blueprints
C.Inconsistent scales
D.Misinterpretation of drawings
Answer:
illegible.writng
Explanation:
am I right
Pls help with this pls /what point of view is used to tell Steve Jobs: The Man Who Thought Different?
second-person
third-person
first-person
fourth-person
Answer:
In the case of Steve Jobs: The Man Who Thought Different, the author Karen Blumenthal tells his biography by using his name and "he" pronouns. For example, the opening sentence says "Steve Jobs's first story involved connecting dots, and it began with a most unusual promise". Therefore, the point of view used to tell this story is the third person.
Explanation:
1 A hole opened up in the metal being welded is called ____-through.
Which of the following uses a nonrenewable energy source?
a wind mill
a power plant
a fruit orchard
a swimming pool
Answer:
power plant
Explanation:
Answer:
b
Explanation:
edge 2020
As you increase the amount of pulleys in a pulley system, the mechanical
advantage increases making the applied work
harder
easier
stay the same
harder, then easier
Answer:
The correct option is;
Easier
Explanation:
The force required to lift a given load reduces when the number of pulleys in a pulley system is increased because the number of ropes sharing the applies pulling force is increased, however, the distance by which the rope is to be pulled is doubled when the required force to lift a given load is half the weight of the load.
Which of the following should be performed during daily maintenance? draining the oil line inspecting the injector cleaning the air filter changing the steering fluid
For the MgO–Al2O3 system, what is the maximum temperature that is possible without the formation of a liquid phase? At what composition or over what range of compositions will this maximum temperature be achieved?
Answer:
approximately 2800
At what composition or over what range of compositions will this maximum temperature be achieved? Answer This problem asks that we specify, for the MgO-Al2O3system, Figure 12.23, the maximum temperature without the formation of a liquid phase; it is approximately 2800C which is possible for pure MgO.
Explanation:
What are the five types of civil engineering
Answer: The five types of the civil engineering projects is construction and management, geotechnical, structural, transport, water, and architecture
Explanation: Hope this helps
At what pressure would the refrigerant become liquid at 10°C?
Answer:
2 bar
Explanation:
corresponding pressure of 2 bar (under these conditions the refrigerant will boil in the evaporator).
In the equation, Q = mC(T2 – T1), Q is the amount of
needed, m is the
, and T1 and T2 are the initial and final temperatures. The higher the
C, the more energy you need to produce a given temperature change in a material.
Answer:
Q= Heat energy (Joules)
m= mass of a substance
C= specific heat
