Since carbohydrates are essential biomolecules the action of sugars fluctuates when enzymes consume substrates of glucose molecules.
Gas pressure is the pressure created by the collision of gas particles with an object. Inside the balloon, gas particles collide with the inner wall of the balloon. It's these collisions that keep the balloon inflated. When carbon dioxide gas fills the balloon, it inflates. The more gas produced, the bigger the balloon will inflate.
The chemical reaction between baking soda and vinegar will inflate the balloon as long as the baking soda and vinegar react. Force Balance: The pressure inside the inflated balloon is greater than the pressure outside. The balloon is stable because the expansion force due to the pressure difference balances the contraction force due to the surface tension of the rubber.
Learn more about Gas inflated here:-https://brainly.com/question/27859084
#SPJ1
State the composition of the alloy to make rings
Explanation:
Write a short report describing your ideas for a school of the future. You can suggest changes to:
• school buildings and classrooms.
• the library
• the cafeteria
• how classes are taught.
Give a reason for each of your suggestions. Use a variety of synonyms and accurate vocabulary.
200 words only
Without using the periodic table, determine the group, period, and block of an atom with the following electron configurations a. [ne]3s^2
The element is in 2nd group, 3rd period and s block.
How to check the group, period and block of the elements by looking at the electronic configuration?
The total number of valence electron gives us the group, the total number of shells gives us the period and the shell which the valence electron is entering tells us about the block it belongs to.
In [Ne]3s2, the valence electron is 2, the number of shells is 3 that is 1,2 and 3. the valence electron is entering the the s subshell.
Therefore, in [Ne]3s2, the group is 2nd, the period is 3 and it belongs to s block.
To learn more about the elements in the periodic table from the given link https://brainly.com/question/25916838
#SPJ13
how to balance by hit and trial method reaction
zn + Hcl - Zncl2 + Hcl
The balanced equation by hit and trial method is:
Zn + 2HCl → ZnCl2 + H2
Because a metal is replaced by another metal, the interaction between hydrochloric acid and zinc produces a single-displacement reaction.
This can be shown by,
B + CD → BD + C
There are two requirements: either B and D must be different metals (or any element that may form a cation, such as a hydrogen), while C must be an anion, or B and D must be halogens, while C must be a cation.
Count the Zn, Cl, and H atoms on each side of the chemical equation to balance the HCl-Zn reaction equation. To balance the equation, just alter the coefficients or the numbers that come before the atoms or compounds. The equation appears as follows after the coefficients have been changed:
ZnCl2 + H2 → Zn + 2HCl
Balance the molecular equation first.
Zn + 2HCl → ZnCl2 + H2
The net ionic equation will be, once the number of ions on both sides of the reaction is equalized by crossing them out.
Zn + 2H+ + 2 Cl– → Zn2+ + 2Cl– + H2
The balanced equation will be,
Zn + 2HCl → ZnCl2 + H2
Learn more about balanced equations here:
https://brainly.com/question/2399130
#SPJ9
Please help me
Is this reaction endothermic or endothermic?
CIO + O - CI + O^2
This reaction, CIO + O - CI + O2, is an example of an endothermic chemical reaction, where the reactants take heat energy from their environment and use it to create products.
Explanation of endothermic?Endothermic chemical reactions occur when the reactants take in heat energy from their environment to create products. A cooling effect is produced by these reactions because they cause their surroundings to become cooler.
How are endothermic and exothermic different?Exothermic means that the chemical reaction releases energy. In exothermic reactions, bonds are broken in the reactants, but more energy is released when the bonds are broken in the products. Endothermic chemical processes are those that take up (or utilize) energy.
To know more about endothermic visit:
https://brainly.com/question/23184814
#SPJ13
Chlorine gas is bubbled through acalcium bromide solution. The solution turns brown, the color of bromine.
What type of reaction is this?
Chlorine gas is bubbled through a calcium bromide solution is a single displacement reaction.
Chlorine (in the form of a gas or dissolved in water) replaces bromine when added to calcium bromide solution. Chlorine replaces bromine in calcium bromide because it is more reactive than bromine. The solution darkens. The displaced bromine is responsible for this brown color. calcium chloride is the product of the chlorine.
A single replacement reaction, also known as a single displacement reaction, occurs when one element in a molecule is swapped out for another. Starting ingredients are always pure elements combined with an aqueous compound, such as pure hydrogen gas or zinc metal. A new aqueous compound and a different pure element will be produced as products when a replacement reaction takes place.
For more information on displacement reaction kindly visit to
https://brainly.com/question/3172917
The diagram shows an exchange
surface in the human body. Name the
parts labelled 2.
Enter your answer
Answer: villi/villus
Explanation: The parts labeled 2 are villi, many of which are found in the small intestine.
villi/villus exchange surface in the human body which are found in the small intestine.
what are the function of villi ?They are small finger-like folding in the small intestine, A network of capillaries and a big lymph vessel called the lacteal supply the villi.
These are found in the small intestine's inner walls, Villi are specialized for absorption in the small intestine as they have a thin wall, one cell thick, which enables a shorter diffusion path.
They have a large surface area so there will be more efficient absorption of fatty acids and glycerol into the blood stream. They have a rich blood supply to keep a concentration gradient.
For more details villi, visit
https://brainly.com/question/11375300
#SPJ2
For the reaction N2(g) + 3H2(g) ↔ 2NH3(g), the equilibrium constant, K, = 9.83 x 10-2 at a certain temperature and pressure.
While the reaction was proceeding at this temperature and pressure the concentrations of the reactants and products were measured and found to be
[N2] = 0.910 mol/L
[H2] = 0.300 mol/L
[NH3] = 0.0081 mol/L
a. Was the reaction at equilibrium? Explain. (4 marks)
b. If the reaction was not at equilibrium, in which direction was it proceeding? Explain
The reaction is not at equilibrium and it is in the forward direction.
a.
Given,
[N₂] = 0.910 mol / L
[H₂] = 0.3 mol / L
[NH₃] = 0.0081 mol / L
K = 9.83 x 10⁻²
The balanced chemical equation for the given reaction is,
N₂(g) + 3H₂(g) ⇄ 2NH₃(g)
The formula of equilibrium constant is given by,
K = [NH₃]² / [N₂] [H₂]²
9.83 x 10⁻² = [(0.0081)² ]/ [0.910 × (0.3)²]
⇒9.83 x 10⁻² = (0.00006561) / (0.0819)
⇒9.83 x 10⁻² = 0.0008010989
⇒0.00983 = 0.0008010989
LHS ≠ RHS
Hence, the reaction is not at equilibrium.
b.
The reaction is in forward direction.
Learn more about direction of the reaction from the link given below.
https://brainly.com/question/10278602
#SPJ1
This is the name of the variable in a scientific experiment that is controlled by the scientist
O Negative control
O Independent Variable
O Dependent Variable
O Positive control
Answer:
b.Independent variable
Explanation:
The independent variable is the one that is changed by the scientist. To insure a fair test, a good experiment has only one independent variable. As the scientist changes the independent variable, he or she records the data that they collect.
.
Look at the atoms of the molecules used for london dispersion forces and diople-dipole forces. What do you notice about the difference in these atoms and waht explanation do you have for why that difference leads to different intermolecular forces?
The difference between the molecules that have dipole forces and those that have London forces is that the molecules that have dipole forces are polar while those that have London forces are not.
What is the dipole forces?We know that dipole forces are one of the kinds of intermolecular forces that exist. Let us note that a molecule is composed of the primary bond forces that hold the atoms of the molecule together and then the secondary bond forces that do hold the molecules together.
Now, the kind of interactions that exists between the molecules is the reason for the properties of the compound that we see. The molecules have not been shown here but I would discuss the properties of the London forces and the dipole forces.
Note that the molecules that do have the dipole forces have an electronegativity difference between the atoms of the molecule. The molecules that have the London forces are largely non polar.
Learn more about London forces:https://brainly.com/question/20514601
#SPJ1
A solution is prepared by dissolving sodium benzoate and benzoic acid in water to give a 9 mmol/litre concentration of each compound. The mixture has a pH of 4.21 at 25oC. Calculate the acid dissociation constant of benzoic acid, Ka.
Hint: pH = pKa + log10 ·[sodium benzoate] / [benzoic acid]
A solution is prepared by dissolving sodium benzoate and benzoic acid in water to give a 9 m mol / liter concentration of each compound. The mixture has a pH of 4.21 at 25 °C. the acid dissociation constant of benzoic acid, Ka is 6.1 × 10⁻⁵.
the pH of solution is given as :
pH = pka + log ( [sodium benzoate / benzoic acid])
4.21 = pka + log 1
pka = 4.21
pka = - log ka
ka = 10^- pka
ka = 6.2 × 10⁻⁵
Thus, A solution is prepared by dissolving sodium benzoate and benzoic acid in water to give a 9 m mol / liter concentration of each compound. The mixture has a pH of 4.21 at 25 °C. the acid dissociation constant of benzoic acid, Ka is 6.1 × 10⁻⁵.
To learn more about pH here
https://brainly.com/question/24052816
#SPJ9
10. In which of the following situations is a biotechnologist most likely to decide to use directed evolution as an enzyme engineering technique as opposed to rational design?
A) When a structure of the
enzyme is available to aid engineering
B) When the enzyme can only be
screened in a low throughput manner
C) When the enzyme mechanism
is understood and provides insight to engineering
D) When current data allows
molecular modelling techniques to be used predictively
E)When none of the above are true
A Biotechnologist decides to use directed evolution as an enzyme engineering technique when the enzyme mechanisms is understood and provides insight to engineering Why is directed evolution important?
A potent method for enhancing the functionality of proteins is directed evolution. When the biological function is unclear or there is little chemical understanding of the substrate and protein structure, directed evolution generates hundreds of variants in order to find the optimal solution.
What is enzyme engineering technique?
In order to increase the usefulness and activity of existing enzymes, enzyme engineering approaches use recombinant DNA technology to develop new proteins and enzymes with designer functions.
What is rational design?
In synthetic science and biomolecular designing, sane plan (RD) is an umbrella term which welcomes the system of making new particles with a specific usefulness, in light of the capacity to foresee how the atom's construction (explicitly got from themes) will influence its conduct through actual models.
Hence, Biotechnologist most likely to decide to use directed evolution as an enzyme engineering technique as opposed to rational design when the enzyme mechanism is understood and provides insight to engineering .
To learn more about direct evolution from the given link:
https://brainly.com/question/12271572
#SPJ1
How many grams of propane can combust at 25°C and 1.04 atm if reacting with 14.7 L of oxygen gas?
The volume of oxygen is 14.7 litres.
What is volume?
volume is a measure of occupied three dimensional space.
Sol-Balanced chemical reaction: C₃H₈ + 5O₂ → 3CO₂ + 4H₂O.
m(C₃H₈-propane) = 5.53 g.
n(C₃H₈) = m(C₃H₈) ÷ M(C₃H₈).
n(C₃H₈) = 5.53 g ÷ 44.1 g/mol.
n(C₃H₈) = 0.125 mol.
From chemical reaction: n(C₃H₈) : n(O₂) = 1 : 5.
n(O₂) = 0.625 mol.
T = 25° = 298.15K.
p = 1.04 atm.
R = 0.08206 L·atm/mol·K.
Ideal gas law: p·V = n·R·T .
V(O₂) = n·R·T / p.
V(O₂) = 0.625 mol · 0.08206 L·atm/mol·K · 298.15 K / 1.04 atm.
V(O₂) = 14.7 L.
To know more about volume click-
https://brainly.com/question/23963432
#SPJ1
At a crime scene, Lorenzo finds a gun in shallow pond water. How should he transport the gun to BEST preserve the evidence?
A.
He should drain the water and then put the gun in a plastic bag.
B.
He should rinse the gun, dry it, and then put it in a paper bag.
C.
He should clean the gun and collect a separate water sample.
D.
He should keep the gun submerged in water as he transports it.
Answer:d
Explanation:
how without making any quantitative measurements could you determine if a piece of plastic has a density greater or less than 1 g/cm
To determine if the piece of plastic has a density greater or less than 1 g/cm³, the piece of plastic is placed in water, if it sinks, it has a greater density, but if it floats, it has a lesser density.
What is an appropriate method to determine if a piece of plastic has a density greater or less than 1 g/cm³?The density of a substance measure how compact the substance is.
For fluids such as water, objects that are denser than water will sink in water. However, if the density is less than that of water, it will float in water.
The density of water is 1 g/cm³.
Hence, objects that have densities greater than 1 g/cm³ will sink in water, whereas objects that have densities less than 1 g/cm³ will float in water.
Learn more about density at: https://brainly.com/question/6838128
#SPJ1
How is a tornado different from a hurricane
A. A tornado causes less damage to an ecosystem
B. A tornado brings more rain
C. A tornado is much smaller
D. Hurricanes do not impact life on land
Answer: C. A tornado is much smaller
Explanation: A tornado can be a mile long while hurricanes can be 50 miles long.
A buffer system is set up with [A] = 1.5[HA ]. If pKa = 5.4, what is the pH of the buffer?
5.57 is the pH of the buffer .
What is buffer ?
Buffer, in chemistry, usually a solution containing acids and bases or salts that tends to maintain a constant concentration of hydrogen ions. An ion is an atom or molecule that has lost or gained one or more electrons. A common buffer is a solution of acetic acid (CH3COOH) and sodium acetate. In aqueous solution, sodium acetate completely dissociates into sodium (Na+) and acetate (CH3COO-) ions. Buffer solutions with different hydrogen ion concentrations can be prepared by varying the buffer ratio and choosing acids of appropriate intrinsic strength. Commonly used buffers include phosphate, citrate, or borate and their salts
To learn more about Buffer , click the link below ;
https://brainly.com/question/26416276
#SPJ9
In an investigation of the decomposition of water, a student compared the amount
of oxygen in one test tube to the amount of hydrogen in the other test tube. Which
of the following statements is correct about the comparison?
A. There is twice as much oxygen as hydrogen.
B. There is an equal amount of oxygen and hydrogen.
C. There is one-half as much oxygen as hydrogen.
D. There is four times as much oxygen as hydrogen.
In an investigation of the decomposition of water, a student compared the amount of oxygen in one test tube to the amount of hydrogen in the other test tube is There is one - half as much as hydrogen.
In decomposition of water , water can be broken into the hydrogen gas and the oxygen gas. The water decomposition reaction is given as :
2H₂O ------> 2H₂ + O₂
The ratio of hydrogen and oxygen in the decomposition reaction of water is 2 : 1.
Thus, In an investigation of the decomposition of water, a student compared the amount of oxygen in one test tube to the amount of hydrogen in the other test tube is There is one - half as much as hydrogen.
To learn more about decomposition here
https://brainly.com/question/8009068
#SPJ1
What is the equilibrium constant K at 25 °C for an electrochemical cell when E° = +0.0165 V and n = 2?(F = 96,500 J/(V･mol), R = 8.314 J/(mol･K))
The equilibrium constant K of the electrochemical cell is 2.976.
What is equilibrium constant ?The equilibrium constant of a chemical reaction is described as the value of its reaction quotient at chemical equilibrium, a state approached by a dynamic chemical system after sufficient time has elapsed at which its composition has no measurable tendency towards further change.
We have that:
ΔG = -nFE°cell
n = 2
Force value = 96,500 J/(V･mol)
E°cell = +0.0140 V
ΔG = -(2 * 96,500 * 0.0140)
ΔG = -2702 J
Then,
But;
ΔG = -R TlnK
lnK = -(ΔG/RT)
The value of K = e^[-(ΔG/RT))
The value of K = e^[-(( -2702)/8.314 * 298]
The value of K = 2.976
Learn more about equilibrium constant at:
https://brainly.com/question/3159758
#SPJ1
why were gold and copper the first forms of matter investigated by humans??
Gold and copper were the first forms of matter investigated by humans because they were pretty and have a shiny appearance.
Gold and copper have a shiny face and they were used in the production of ornaments and jewelry. Along with jewelry many other precious items were made from gold and copper. Gold and copper were so valuable forms of matter and they are also economically used by many countries. Gold was mostly used in making of ornaments and copper was used in making of frames.
In today's modern world mainly gold is one of the most precious element which is obtained for economical use.
Learn more about gold and copper from the link given below.
https://brainly.com/question/23500830
#SPJ1
convert 0.87 atm to inches Hg. please explain step by step
Answer:
26.03 inHg
Explanation:
1 atm = 29.92 inHg
0.87 atm = 29.92 inHg x 0.87
0.87 atm = 26.03 inHg
How many protons and electrons are present in one Br -ion2
Answer:
Br- has 35 protons and 36 electrons
Explanation:
Do you mean Br-?
Br has atomic number of 35 => 35 protons.
Neutral Br has 35 electrons.
Br- has 1 extra electron, resulting in total of 36 electrons.
How do I balance these equations? Please explain so I can learn how.
One mole of CS₂ and two moles of H₂S are formed as products and 3 moles of CH₄ are leftover.
What is the limiting reagent?A limiting reagent is a reactant that is fully exhausted from the reaction mixture at the completion of a reaction. The limiting reactant will decide the maximum amount of product.
Given, a balanced chemical equation of the reaction between methane and sulphur is:
[tex]CH_4 + 4S\longrightarrow CS_2 +2H_2S[/tex]
Given, the number of moles of the sulphur = 4
The number of moles of methane = 4
From the chemical reaction, one mole of methane reacts with four moles of sulphur. Therefore, four moles of sulphur fully react with one mole of methane and three moles of methane leftover.
Learn more about limiting reagents, here:
brainly.com/question/26905271
#SPJ1
What is the strength and weakness of vaccines ?
Answer:
Strength:
can prevent diseases from making you illWeakness:
the virus/bacteria can change shape and look and your body and the vaccine won't be able to recognize it anymoreAn object is placed in 20 mL of water. This water rose to a level of 26 mL. The object has a mass of 18 g. What is the density of the object.
An object is placed in 20 mL of water. This water rose to a level of 26 mL. The object has a mass of 18 g. the density of the object is 3 g/mL.
given the data as follows :
mass of object = 18 g
volume of object = final volume - initial volume
volume of object = 26 mL - 20 mL
= 6 mL
the density expression is given as:
Density = mass / volume
Density = 18 g / 6 mL
Density = 3 g/mL
Thus, An object is placed in 20 mL of water. This water rose to a level of 26 mL. The object has a mass of 18 g. the density of the object is 3 g/mL
To learn more about Density here
https://brainly.com/question/15164682
#SPJ1
Is it polar or non polar ?
please help!!!! ⚠️⚠️⚠️⚠️⚠️⚠️⚠️⚠️
Polyatomic ions: [tex]CH_3COO^-[/tex], [tex]NO_3^-[/tex], [tex]NH^+[/tex], [tex]CN^-[/tex], [tex]Li^+[/tex], and [tex]OH^-[/tex]
Monatomic ions: [tex]Ca^{2+[/tex], [tex]O^{2-[/tex], and [tex]Fe^{3+[/tex]
Monoatomic vs Polyatomic IonsIn chemistry, monoatomic ions are ions that consist of only a single type of atom. They are usually positive or negatively charged and are otherwise known as simple ions. Examples include [tex]Ca^{2+[/tex], [tex]O^{2-[/tex], and [tex]Fe^{3+[/tex]
Polyatomic ions, on the other hand, are ions that consist of more than one atom, unlike monoatomic ions. The two or more atoms are covalently bonded and the entire structure behaves like a single chemical entity in reactions. Polyatomic ions are otherwise known as molecular ions.
Examples of polyatomic ions are [tex]CH_3COO^-[/tex], [tex]NO_3^-[/tex], [tex]NH^+[/tex], [tex]CN^-[/tex], [tex]Li^+[/tex], and [tex]OH^-[/tex]
Thus, from the diagram:
Polyatomic ions: [tex]CH_3COO^-[/tex], [tex]NO_3^-[/tex], [tex]NH^+[/tex], [tex]CN^-[/tex], [tex]Li^+[/tex], and [tex]OH^-[/tex]Monatomic ions: [tex]Ca^{2+[/tex], [tex]O^{2-[/tex], and [tex]Fe^{3+[/tex]More on ions can be found here: https://brainly.com/question/14982375
#SPJ1
What does atomic number describe?
Responses
mass
mass
number of protons
number of protons
number of neutrons
number of neutrons
atomic weight
Answer:
Number of protons in the nucleus of an atom
Hydrogen atoms absorb energy so that electrons can be excited to the n = 6 energy level. Electrons then undergo these transitions, among others: (a) n = 4 → n = 3 (b) n = 6 → n = 3 (c) n = 5 → n = 4 (i) Which transition produces a photon with the least energy? (ii) Which transition produces a photon with the highest frequency? (iii) Which transition produces a photon with the shortest wavelength?
1) The transition that produces the least energy is n = 4 → n = 3
2) The transition that produces a photon with the highest frequency is n = 6 → n = 3
3) The transition that produces a photon with the shortest wavelength n = 4 → n = 3
What is the Bohr model?We know from the Bohr model that an electron that is found in the hydrogen atom can be moved from a lower to a higher energy level and that would happen when the electron is able to absorb energy in the form of visible light.
Looking at the transitions as we have it here, we can see that the photon that would photons produce the least energy would be two levels that are closest together.
Also, the photon that would have the highest frequency is the photon that is involved in the transition that has the furthest energy apart from each other.
The transition that produces a photon with the shortest wavelength must also be farthest apart in energy.
Learn more about photons;https://brainly.com/question/20912241
#SPJ1
what mass of iron(III) oxide must be used to produce 10.6g iron?
The mass of iron (II) oxide that must be used to produce 10.6 g of iron would be 14.37 grams.
Stoichiometric problemIron is produced from iron (II) oxide by reacting with carbon monoxide according to the following equation:
[tex]Fe_2O_3 + 3CO -- > 2Fe + 3CO_2[/tex]
The equation already obeys the law of conservation of atoms. Hence. it is a balanced equation.
The mole ratio of iron (III) oxide that reacts and the iron that is produced according to the equation is 1:2.
Now, in a particular reaction involving iron (III) oxide and carbon monoxide, 10.6 grams of iron were produced. The amount of iron (III) oxide used can be obtained using the mole ratio from the balanced equation of the reaction.
Recall that: mole = mass/molar mass
Molar weight of iron = 56 g/mol
Mole of 10.6 g of iron = 10.6/56
= 0.19 moles
Since the mole ratio is 1:2, the equivalent mole of iron (III) oxide that reacts can be obtained:
0.19/2 = 0.09 moles
Molar mass of iron (III) oxide = 159.69 g/mol
Mass of 0.09 mol iron (III) oxide = 0.09 x 159.69
= 14.37 grams
Thus, the amount of iron (III) oxide that must be used to produce 10.6 g of iron would be 14.37 grams.
More on stoichiometric problems can be found here: https://brainly.com/question/28297916
#SPJ1
Are there substances in the lab that have bonds that are not strictly ionic, covalent, or metallic? Explain your answers.
Metallic bonds occur amid metal atoms. Whereas ionic bonds combine metals with non-metals, metallic bonding fixes several metal atoms.
What determines bond is ionic, covalent, or metallic?An ionic bond is formed by joining a metal and a nonmetal, while a covalent bond is formed by allying two nonmetals. So we check the periodic table to see if our compound is made up of metals or nonmetals, or of two nonmetals.
Covalent compounds are built when two nonmetals react with each other. Since hydrogen is a nonmetal, binary compounds that carry hydrogen are also usually covalent compounds. Metallic elements produced compounds with non-metallic elements with the help of ionic bonds.
So we can conclude that In metals, the electrons leave the outer shells of metal atoms, devise positive metal ions and a 'sea' of delocalized electrons.
Learn more about metallic bonds here: https://brainly.com/question/20536777
#SPJ1
