Predict the missing component in the nuclear equation.​​

Answer:

0.0456 M

Explanation:

The concentration of glucose can be determined as follows:

Step 1: Concentration of glucose in the original solution = Mass of glucose / Volume of solution = 227.9 g / (500.0 mL x 10^-3 L/mL) = 0.456 M

Step 2: Concentration of glucose in the dilute solution = Mass of glucose / Volume of dilute solution = 0.456 M x (16.8 mL x 10^-3 L/mL) / (250.0 mL x 10^-3 L/mL) = 0.0456 M

So, the concentration of glucose in the dilute solution is 0.0456 M to 4 significant figures.

ALLEN

The coefficients that correctly balance the given equation is 1. 6, 3,2

The correct option is C

A balanced equation of a reaction is an equation in which the moles of atoms of elements of the reactants are equal to the moles of atoms of the product.

According to the law of conservation of matter, matter is neither created nor destroyed, hence, the mass of the reactants must be equal to the mass of products at the end of any given chemical reaction.

The balanced equation of the given reaction is as follows:

Ba₃N₂+ 6 HOH - -> 3 Ba(OH)₂ + 2 NH₃

Learn more about balanced chemical equations at: https://brainly.com/question/11904811

#SPJ1

The formulas for the compounds formed between platinum ions and bromide ions are Platinum (II) bromide (PtBr2) and Platinum (IV) bromide (PtBr4)

In both of these compounds, the bonding between the platinum ion and the bromide ions is primarily ionic in nature.

In platinum (II) bromide (PtBr2), each platinum ion is surrounded by two bromide ions, and each bromide ion is bonded to one platinum ion. The platinum ion has a +2 charge, and the two bromide ions have a -1 charge each, so the overall charge of the compound is neutral.

In platinum (IV) bromide (PtBr4), each platinum ion is surrounded by four bromide ions, and each bromide ion is bonded to one platinum ion. The platinum ion has a +4 charge, and the four bromide ions have a -1 charge each, so the overall charge of the compound is neutral.

The bond between the platinum ion and the bromide ions is a result of the attraction between their opposite charges.

Read more about Ionic Compounds:

https://brainly.com/question/20348031

#SPJ4

13.8 kJ [tex]mol-1\\[/tex] is  strain energy for the conformer pictured below, using strain energy increments from the table.

The problem is based on the concept of used strain energy  in the conformers.

When two non bonded groups approach each other, it results in repulsion and causes steric strain in the molecule.

Structure of conformer in eclipsed form in Newman projection is as follows:

4.0 kJ mo is energy of eclipsed H-H bond

Energy of eclipsedН-СH, 3 bond is 5.8 kJ mol

Total strain energy of conformer (S,)

E 2x eclipsed (H-H)+ eclipsed (H-CH,)

Replace eclipsed (H-H) with 4.0 kJ mol and eclipsed (H-CH) with 5.8 kJ mol to get

E 2x4.0 kJ mol +5.8 kJ mol =13.8 kJ mol

Learn more about strain energy here:

https://brainly.com/question/28684254

#SPJ4

Answer:

0.101 M

0.1 mol/kg

0.644

Explanation:

To calculate the molarity, molality, and mole fraction of Na2SO4 in a solution, you need to know the moles of Na2SO4 in the solution and the volume or mass of the solution.

A) Molarity: Molarity (M) is defined as the number of moles of solute per liter of solution. To calculate molarity, we need to divide the number of moles of Na2SO4 by the volume of the solution in liters.

First, calculate the number of moles of Na2SO4:

mass of Na2SO4 = 755 g

molecular weight of Na2SO4 = 142 g/mol

number of moles = mass/molecular weight = 755 g / 142 g/mol = 5.34 moles

Next, calculate the volume of the solution:

mass of water = 53,100 g

density of water = 1 g/mL

volume of water = mass/density = 53,100 g / 1 g/mL = 53,100 mL = 53.1 L

Finally, calculate the molarity:

molarity = number of moles / volume of solution = 5.34 moles / 53.1 L = 0.101 M

B) Molality: Molality (m) is defined as the number of moles of solute per kilogram of solvent. To calculate molality, we need to divide the number of moles of Na2SO4 by the mass of the solvent in kilograms.

mass of water = 53,100 g

mass of solvent in kilograms = mass in grams / 1000 g/kg = 53,100 g / 1000 g/kg = 53.1 kg

Finally, calculate the molality:

molality = number of moles / mass of solvent = 5.34 moles / 53.1 kg = 0.1 mol/kg

C) Mole fraction: The mole fraction (X) is defined as the ratio of the number of moles of solute to the total number of moles of solute and solvent in a solution. To calculate the mole fraction of Na2SO4, we need to divide the number of moles of Na2SO4 by the total number of moles of Na2SO4 and water.

number of moles of Na2SO4 = 5.34 moles

number of moles of water = 53.1 kg * 1000 g/kg / 18.015 g/mol = 2.96 moles

total number of moles = number of moles of Na2SO4 + number of moles of water = 5.34 moles + 2.96 moles = 8.30 moles

Finally, calculate the mole fraction:

mole fraction of Na2SO4 = number of moles of Na2SO4 / total number of moles = 5.34 moles / 8.30 moles = 0.644

The molarity of Na2SO4 in the solution is 0.101 M, the molality is 0.1 mol/kg, and the mole fraction of Na2SO4 is 0.644.

Answer:

10 moles of NaClO3 were needed to produce 30 moles of O2

Explanation:

From the equation, we know that 2 moles of NaClO3 produce 3 moles of O2. To find out how many moles of NaClO3 are needed to produce 30 moles of O2, we divide the number of moles of O2 by the mole ratio:

30 moles O2 / 3 moles O2 per 2 moles NaClO3 = 10 moles NaClO3

So, 10 moles of NaClO3 were needed to produce 30 moles of O2.

The molality and density of an aqueous solution of glucose (mm = 180. 2 g/mol) are 5. 21 and 1. 20 g/ml, respectively. Therefore, the molarity of glucose in the solution is 0.0355 M.

Molality is the number of moles of solute per kilogram of solvent, while molarity is the number of moles of solute per liter of solution.

molarity (M) = molality (m) * (density of solvent in g/mL) / (molar mass of solute in g/mol)

molality (m) = 5.21 m

the density of solvent (g/mL) = 1.20 g/mL

molar mass of solute (g/mol) = 180.2 g/mol

So, molarity (M) = 5.21 m * (1.20 g/mL) / (180.2 g/mol)

molarity (M) = 5.21 m * 0.0067 g/mL/g mol

molarity (M) = 0.0355 M

Therefore, the molarity of glucose in the solution is 0.0355 M.

To learn more about molarity here:

https://brainly.com/question/8732513

#SPJ4

C5H12 + O2 → H2O + CO2 this reaction is complete combustion reaction. Because carbon dioxide and water are formed as a product.

The Combustion defined as a high-temperature exothermic redox chemical reaction between a fuel and an oxidant, normally atmospheric oxygen, that produces oxidized, often gaseous products, in a mixture termed as smoke.

C5H12 + O2 → H2O + CO2 Pentane undergoes a complete combustion reaction with excess oxygen to give carbon dioxide and water.

Thus, this reaction is complete combustion reaction. Because carbon dioxide and water are formed as a product.

To learn more about the combustion reaction, follow the link;

https://brainly.com/question/30562669

#SPJ1

With respect to the reaction shown, the type of compound that will form is a hemiketal, and the name of the reaction is "hemiketal formation.

A hemiketal is created when an alcohol reacts with a ketone, whereas a hemiacetal is created when an alcohol reacts with an aldehyde.

Organic substances called hemiacetal and hemiketal are hybrid molecules that have an ether group and a hydroxyl group in the same molecule.

The name of reaction that forms hemiketals and hemiacetals is called "hemiacetal formation" or "hemiketal formation," depending on the specific functional group involved.

Lern more about hemiketals at: https://brainly.com/question/2384794

#SPJ1

Answer:

50 moles of oxygen

Explanation:

The reaction between octane (C8H18) and oxygen (O2) can be represented by the following equation:

C8H18 + 12.5O2 -> 8CO2 + 9H2O

So, to react fully with 4 mol of octane, we need 4 mol * 12.5 mol O2/1 mol C8H18 = 50 moles of oxygen.


ALLEN

The CCl4 molecule is larger and has more electrons hence it is more polarizable and has a larger boiling point

A higher molar mass does imply a higher boiling point for a substance, assuming that the other conditions (pressure, temperature, etc.) are constant.

This is because the boiling point is a measure of the temperature at which a substance changes from a liquid to a gas at a given pressure. As the molar mass of a substance increases, the intermolecular forces between the molecules tend to be stronger, which makes it more difficult to separate the molecules and vaporize the substance. As a result, the boiling point generally increases with increasing molar mass.

Learn more about boiling point:https://brainly.com/question/2153588

#SPJ1

The molecule D shows an isomer of the molecule given below. Therefore, option D is correct.

The term Isomer is defined as the compounds that contain exactly the same number of atoms, i.e., they have exactly the same empirical formula, but differ from each other by the way in which the atoms are arranged.

Isomerism is the phenomenon in which more than one compounds have the same chemical formula, but they have different chemical structures.

Therefore, given molecule and D molecule are isomers of each other because they have the same number of atoms, but they differ in arrangement of the atoms.

Thus, option D is correct.

To learn more about an isomer, follow the link;

https://brainly.com/question/13422357

#SPJ1

According to Lechatliers principle, as the concentration  of HCl is decreasing, the reaction will shift to the reactant side to increase HCl, then the Keq decreases, since product concentration is decreases.

According to Lechatliers principle, when an any disorder imbalance the equilibrium of a reaction system, the system itself balances the factors and shifts to a new equilibrium.

If the concentration of any component is increased, then the reaction shifts to the direction in which it is consumed. If the concentration is decreased, the reaction shifts to the direction in which the component is produced.

Hence, as the HCl decreases, the reaction shifts to backwards direction to produce more HCl, then, concentration of reactants HCl and Mg increases, and that products and Keq decreases.

The reaction is an exothermic reaction. Hence, as the temperature is increased, the reaction shifts to the backward direction in which heat is used. Hence, reactant concentration increases, product concentration decreases, Keq also decreases.

If the temperature is reduced, the reaction shift to the forward direction. Hence, concentration of HCl, and Mg decreases but MgCl2 increases and Keq increases.

Find more on Lechatliers principle:

https://brainly.com/question/14015038

#SPJ1

Answer:

293 ms

Explanation:

The half-life of a first-order reaction can be calculated using the following formula:

t1/2 = 0.693 / k

Where t1/2 is the half-life and k is the rate constant.

For this reaction, the rate constant is 2.35 x 10^2 L/mol/s, so:

t1/2 = 0.693 / (2.35 x 10^2 L/mol/s) = 0.293 / (2.35 x 10^2) s = 0.000293 s = 293 ms

Answer:

0.293 / 2.35 × 10^2 seconds.

Explanation:

The half-life of a first order reaction can be calculated using the equation:

t1/2 = 0.693 / k

where t1/2 is the half-life, k is the rate constant, and 0.693 is the natural logarithm of 2.

Substituting the values given in the question:

t1/2 = 0.693 / 2.35 × 10^2 L mol-1 s-1 = 0.293 / 2.35 × 10^2 s

So, the half-life of the species is approximately 0.293 / 2.35 × 10^2 seconds.

It shows that the number of individuals in the population will decrease until the carrying capacity of the environment is reached.

What is the environment?

To know more about environment, click the link given below:

https://brainly.com/question/13107711

#SPJ1

It will take approximately 4.39 days until the activity of the Tl-201 in Simone's body is one-fourth of the initial activity.

The time it takes for half of a substance's radioactive nuclei to decay is known as its half-life. It is a radioactive substance is characteristic property that is used to determine a material's rate of decay. A decay curve that plots the number of radioactive atoms remaining over time can be used to determine a substance's half-life. Radiometric dating, nuclear medicine, and radiation safety all make use of half-life.

The decay of Tl-201 follows first-order kinetics. The equation for the decay of a radioactive substance is given by:

                            N = N0 × [tex]1/2^{t/t/2}[/tex]

where N is the amount of the substance at time t, N0 is the initial amount of the substance, t1/2 is the half-life of the substance, and t is the time that has elapsed.

We are given that the half-life of Tl-201 is 3.0 days. This means that if we start with an initial activity of A0, the activity at any time t is given by:

                              A = A0 * [tex]1/2^{t/3}[/tex]

We want to know how many days it will take until the activity of the Tl-201 in Simone's body is one-fourth of the initial activity. Let's call this time t₁ :

                          A = A 0/4

                        = A0 × (1/2)[tex]^{t^{1/3} }[/tex]

Dividing both sides by A0 and taking the logarithm of both sides, we get:

                              ln(1/4)

                         = - [tex]t^{1/3}[/tex] × log(2)

Solving for t₁, we get:

                                t₁ = (3/log(2)) × log(4)

                                = 4.39 days

Therefore, it will take approximately 4.39 days until the activity of the Tl-201 in Simone's body is one-fourth of the initial activity.

Learn more about Half - life :

brainly.com/question/25750315

#SPJ1

the empirical formula of the compound  that contains 1. 04 g k, 0. 70 g cr, and 0. 86 g o. is K0.5Cr1O2.

The empirical formula of a compound is the simplest whole-number ratio of atoms of each element in the compound. To find the empirical formula of a compound, you need to determine the number of moles of each element present in the sample.

First, you need to convert the masses of each element to moles:

For potassium (K), 1.04 g / 39.10 g/mol = 0.0264 moles

For chromium (Cr), 0.70 g / 51.99 g/mol = 0.0134 moles

For oxygen (O), 0.86 g / 16.00 g/mol = 0.0538 moles

Next, divide each number of moles by the smallest number of moles to get the simplest whole-number ratio:For potassium (K), 0.0264 moles / 0.0264 moles = 1

For chromium (Cr), 0.0134 moles / 0.0264 moles = 0.5

For oxygen (O), 0.0538 moles / 0.0264 moles = 2.0

Therefore, the empirical formula of the compound is K0.5Cr1O2. This represents the simplest whole-number ratio of atoms of each element in the compound.

Learn more about compound here:

https://brainly.com/question/3648919

#SPJ4

Answer: 23

Explanation:

because it is been multiplyed by 3 has s 31 nucleons and has atomic numbe equal to 15. The number of electron having m = 0 i

Answer:

The number of electrons with magnetic quantum number m = 0 can be calculated from the atomic number of the element. The atomic number gives the number of protons, and thus the number of electrons in a neutral atom. For the anion X-3, we have 15 - 3 = 12 electrons. The magnetic quantum number m can have integer values from -j to +j, where j is a half-integer representing the total angular momentum quantum number of the electron. In this case, j can be equal to 1/2, 3/2, 5/2, and so on. For the lowest value of j, which is 1/2, the magnetic quantum number m can have two values, +1/2 and -1/2. Thus, there are two electrons with m = 0. The number of electrons with m = 0 is equal to the number of electrons in the lowest energy level, which is the 1s orbital. In this case, two electrons occupy the 1s orbital, and both have m = 0.

Explanation:

Answer:

The Speed squared is equal to the Kinetic Energy

Explanation:

1^{2}  = 1

2^{2} = 4

3^{2} = 9

4^{2} = 16

Therefore the data on the table proves that the Speed squared is equal to the Kinetic Energy

Every solution should have an x mol/L maximum concentration. Each solution's concentration will be lowered to half, or x/2, after mixing.

∴[FeSO4] = [Na2S] = x/2M

Then, [Fe2+] = [FeSO4] = x/2M

Also, [S2−]=[NasS] = x/2M

Fe(S)(x) ↔ Fe 2 + (aq) + S2−(aq)

Ksp=[Fe2+][S2−]

6.3 × 10−18=(x/2)(x/2)

x2/4=6.3 × 10−18  

⇒ x = 5.02 × 10−9

If the concentrations of both solutions are equal to or less than 5.02 × 10–9M, then there will be no precipitation of iron sulphide.

⇒x =5.02 × 10−9

Na2S and FeSO4 are combined in an equal volume. Maximum concentrations of both solutions are 22, 51109M, and 5. Since Ba(OH)2 is the strongest base of the available alternatives, its pH is highest. BaCl2 is a strong base because it is the salt of Ba (OH)2. BaCl2 hydrolysis produces the most alkaline solutions and raises the PH of all the salts provided in the inquiry.

Learn more about iron sulphide here:

https://brainly.com/question/19039025

#SPJ4

To determine when the cells are in an isotonic solution, the additional investigation that can be used is option B. Decreasing the salinity of the environment a little at a time until ATP usage reaches a minimum.

An isotonic solution is one where the solute concentration outside the cell is the same as the solute concentration inside the cell. In this state, there is no net movement of water into or out of the cell, and the contractile vacuole does not need to pump out excess water. As the salinity of the environment is decreased, the solute concentration outside the cell will decrease, and water will enter the cell, leading to an increase in the workload of the contractile vacuole. However, when the salinity of the environment is decreased to the point where it becomes isotonic with the cytosol of the cell, the workload of the contractile vacuole will reach a minimum, as there is no more excess water to be pumped out.

Therefore, by decreasing the salinity of the environment a little at a time until the ATP usage reaches a minimum, the experimenter can determine when the cells are in an isotonic solution.

Learn more about cytosol here;

https://brainly.com/question/23987687

#SPJ4

46.2648

Atomic mass describes the number of protons and neutrons in an atom.

Percent Abundance

Percent abundance is the percentage of atoms within a sample that have a specific mass number. The reason that different atoms within a sample would have different mass numbers is that they are different isotopes. For example, if the isotope Cl-35 has a percent abundance of 75%, then 75% of all Chlorine atoms within a sample will have a mass number of 35. Percent abundance refers to the likelihood of an isotope occurring in a natural sample. Percent abundance does not take into account artificial samples of elements.

Finding Atomic Mass

The atomic mass of an element is found through the mass of isotopes and their percent abundances. The formula for atomic mass is:

In this formula, the m is the mass of the isotope and p is the percent abundance. The percent abundance should be expressed as a decimal for all calculations. Now, plug in the values and solve.

Rounded to 4 decimal places, this equals 46.2648. This means that the atomic mass of element "X" is 46.2648 amu.

A key advantage of PDF is that it has excellent tools for creating and editing images. It is true.

What is a PDF?

To know more about PDFs, click the link given below:

https://brainly.com/question/14863778

#SPJ1

Answer:

27 moles of sulfuric acid are produced.

Explanation:

The equation for the reaction between nitric acid (HNO3) and sulfuric acid (H2SO4) to form nitration sulfate (HNO3) and water (H2O) is:

2 HNO3 + H2SO4 → H2SO4 + 2 H2O

For every 2 moles of nitric acid that react, 1 mole of sulfuric acid is produced. So, when 54 moles of nitric acid are consumed, 54/2 = 27 moles of sulfuric acid are produced.

Explanation:

Chemical hazards: Handling toxic substances can cause irritation and carcinogenicity.

Biological hazards: Biological hazards include hazards from working with small animals, working with bloodborne pathogens and working with biological agents, such as viruses and bacteria.

Physical hazards: Physical hazards include exposure to noise, poor posture and the explosibility and flammability of substances.

Safety hazards: Safety hazards include unbalanced centrifuges, danger when handling hot sterilized items and electrical hazards, such as shock, explosions, blasts and electrocutions.

Allergy hazards: A common allergy hazard in the laboratory setting is a latex allergy, as many of the materials used in a laboratory setting are latex.

Dangers in the laboratory setting can also come from unsafe practices, including:

Working alone in the laboratory

Neglecting to wear a lab coat

Lack of safety training

you gonna get magnesium bromide MgBr2

Magnesium is metal and bromine is non-metal, and the combination of the two produces an ionic compound called magnesium bromide

Used as a catalyst.

Used for position-specific analysis of Triglycerols.

Widely used as an anticonvulsant for the treatment of neuropathy.

It is used as a mild sedative.

According to the stoichiometry of the given balanced chemical equation, 1.85 moles of methane are  required to produce 9.03 g of hydrogen.

It is the determination of proportions of elements or compounds in a chemical reaction. The related relations are based on law of conservation of mass and law of combining weights and volumes.

Stoichiometry is used in quantitative analysis for measuring concentrations of substances present in the sample.

In the given reaction, 16 g that is 1 mole methane gives 6 g that is 3 moles hydrogen ,hence for 9 g hydrogen 16×6/9=24.08 g methane is needed and it is equivalent to number of moles= 24.08/16=1.85 moles.

Thus,1.85 moles of methane are  required to produce 9.03 g of hydrogen.

Learn more about stoichiometry,here:

https://brainly.com/question/9743981

#SPJ1

Answer:

The balanced chemical equation for this reaction is:

2 Cu + Ag(NO3)2 -> 2 Cu(NO3)2 + Ag

The limiting reactant is the reactant that runs out first and determines the amount of product that can be produced. To determine the limiting reactant, we need to calculate the number of moles of each reactant.

From the given mass of copper, we can calculate the number of moles as follows:

2.5 g Cu / 63.55 g/mol = 0.0395 mol Cu

From the given mass of silver nitrate, we can calculate the number of moles as follows:

5 g AgNO3 / 169.87 g/mol = 0.0295 mol AgNO3

Since 0.0295 mol of AgNO3 is less than 0.0395 mol of Cu, AgNO3 is the limiting reactant.

To calculate the amount of each product produced, we can use the stoichiometry of the balanced equation.

For Ag, the reaction produces 1 mole of Ag for every 2 moles of AgNO3, so we have:

0.0295 mol AgNO3 * 1 mole Ag / 2 moles AgNO3 = 0.0148 mol Ag

And converting moles to grams:

0.0148 mol Ag * 107.87 g/mol = 1.59 g Ag

For Cu(NO3)2, the reaction produces 2 moles of Cu(NO3)2 for every 2 moles of AgNO3, so we have:

0.0295 mol AgNO3 * 2 moles Cu(NO3)2 / 2 moles AgNO3 = 0.0295 mol Cu(NO3)2

And converting moles to grams:

0.0295 mol Cu(NO3)2 * 164.46 g/mol = 4.86 g Cu(NO3)2

Therefore, the limiting reactant is AgNO3 (Cu/AgNO3) and the reaction produces 1.59 g of Ag and 4.86 g of Cu(NO3)2.

Phenacetin is more polar than aspirin because of its molecular structure. Phenacetin has a polar functional group, the acetamide group (-CONH2), which makes the molecule more polar overall. This group has a positive charge on the nitrogen atom and a negative charge on the oxygen atom, making it a dipole, or a molecule with a positive and negative end.

In contrast, aspirin has a non-polar functional group, the acetyl group (-COCH3), which does not have a dipole moment. This makes aspirin less polar overall.

The polarity of a molecule affects its solubility in different solvents. Polar molecules are soluble in polar solvents, such as water, while non-polar molecules are soluble in non-polar solvents, such as oil. Phenacetin is more soluble in water because of its polar functional group, while aspirin is less soluble in water because of its non-polar functional group.

In summary, phenacetin is more polar than aspirin because it has a polar functional group, the acetamide group, while aspirin has a non-polar functional group, the acetyl group. This difference in polarity affects the solubility of the two molecules in different solvents.