Problem 2 (50 points) Determine whether the given set is a basis for Rª. s-{(1,0,0,1),(0,2,0,2), (1,0,1,0).(0,2,2,0)}

The P-value of the test statistic is 0.171.

The director of research and development is conducting a hypothesis test to see if there is evidence at the 0.05 level that the medicine relieves pain in more than 390 seconds. The null hypothesis is that the mean time in which the medicine relieves pain is 390 seconds, and the alternative hypothesis is that the mean time is greater than 390 seconds. The test statistic is calculated as follows:

z = (398 - 390) / (24 / sqrt(75)) = 0.33

The P-value is the probability of obtaining a test statistic at least as extreme as the one observed, assuming that the null hypothesis is true. The P-value for a z-test with a test statistic of 0.33 is 0.171. Since the P-value is greater than 0.05, the null hypothesis cannot be rejected. Therefore, there is not enough evidence to conclude that the medicine relieves pain in more than 390 seconds.

The P-value can also be calculated using a statistical software program. For example, in R, the following code can be used to calculate the P-value:

z = (398 - 390) / (24 / sqrt(75))

pnorm(z)

The output of this code is 0.171.

Learn more about statistic here: brainly.com/question/31538429

#SPJ11

The probability of selecting a jury of two students and six faculty is P(two students and six faculty) = 41580/(22C8) = 0.36889 (rounded to 5 decimal places). Answer: (a) 0.00193, (b) 0.00907, (c) 0.36889.

(a) Probability of selecting a jury of all students Let S be the event of selecting a student and F be the event of selecting a faculty member. There are 10 students and 12 faculty members in a pool of 10 + 12 = 22 individuals. The probability of selecting a student from the pool of individuals is P(S) = Number of ways to select a student/Total number of individuals = 10/22Similarly, the probability of selecting a faculty member from the pool of individuals is P(F) = Number of ways to select a faculty member/Total number of individuals = 12/22Since we are selecting a jury of eight individuals out of ten students and twelve faculty members, there is only one way to select a jury of all students. Hence, the probability of selecting a jury of all students is P(all students) = (10/22) * (9/21) * (8/20) * (7/19) * (6/18) * (5/17) * (4/16) * (3/15) = 0.00193 (rounded to 5 decimal places).(b) Probability of selecting a jury of all faculty There is only one way to select a jury of all faculty.

Hence, the probability of selecting a jury of all faculty isP(all faculty) = (12/22) * (11/21) * (10/20) * (9/19) * (8/18) * (7/17) * (6/16) * (5/15) = 0.00907 (rounded to 5 decimal places).(c) Probability of selecting a jury of two students and six faculty The number of ways to select two students from ten students = 10C2 = (10 * 9)/(2 * 1) = 45.The number of ways to select six faculty from twelve faculty = 12C6 = (12 * 11 * 10 * 9 * 8 * 7)/(6 * 5 * 4 * 3 * 2 * 1) = 924. The number of ways to select two students and six faculty from a pool of ten students and twelve faculty members = 45 * 924 = 41580. Hence, the probability of selecting a jury of two students and six faculty is P(two students and six faculty) = 41580/(22C8) = 0.36889 (rounded to 5 decimal places).

To know more about probability visit:-

https://brainly.com/question/31828911

#SPJ11

The values of ;

angle 1 = 67°

x = 16.3

y = 6.36

The trigonometric functions are real functions which relate an angle of a right-angled triangle to ratios of two side lengths.

To calculate the value of angle 1;

angle 1 = 180-( 23+90)

angle 1 = 180 - 113

angle 1 = 67°

Calculating y using trigonometry ratio

Tan 23 = y/15

0.424 = y/15

y = 0.424 × 15

y = 6.36

Calculate x using trigonometry ratio;

cos23 = 15/x

0.921 = 15/x

x = 15/0.921

x = 16.3

therefore the values of x and y are 16.3 and 6.36 respectively.

learn more about trigonometric ratio from

https://brainly.com/question/24349828

#SPJ1

There is evidence that the proportion is different from 0.5. d. The p-value for the test in part (b) is 0.008.e.

The 90% confidence interval for the proportion of games won by the home team is (0.4917, 0.5475).This means that we can say with 90% confidence that the true proportion of games won by the home team in the FA premier league is between 0.4917 and 0.5475.

Null Hypothesis: H0: p=0.5,

Alternative Hypothesis: Ha: p ≠ 0.5c. As the null hypothesis value of 0.5 is not included in the 90% confidence interval for the proportion of games won by the home team, we can reject the null hypothesis with 90% confidence level. Therefore, there is evidence that the proportion is different from 0.5. d. The p-value for the test in part (b) is 0.008.e.

The p-value is less than 0.1, so we can reject the null hypothesis at a 10% significance level. Yes, the conclusion matches the conclusion from part (c).

The confidence interval gives us a range of values that we can be confident contains the true proportion of games won by the home team.

The p-value tells us the strength of the evidence against the null hypothesis and the probability of getting the observed results if the null hypothesis is true.g.

The main difference between the bootstrap distribution of part (a) and the randomization distribution of part (d) is that the bootstrap distribution is based on resampling with replacement from the original sample, while the randomization distribution is based on the idea of randomly assigning the outcomes to two groups and calculating the difference in means.

To know more about  Null Hypothesis visit:

brainly.com/question/29892401

#SPJ11

To predict the strain for a single adult in a way that conveys information about precision and reliability with the use of a 95% prediction interval, follow the steps below:The formula for a prediction interval (PI) is:PI = X ± t(α/2, n-1) * s√1+1/n

Where,X is the sample mean,t is the t-distribution value for the given level of confidence and degrees of freedom,s is the sample standard deviation,n is the sample size.The given mean is 26.0, the sample size is 17, and the standard deviation is 3.3.The value of t for a 95% prediction interval at 16 degrees of freedom (n-1) is 2.131.With the use of the given values, substitute in the formula as follows:

PI = 26 ± 2.131 * 3.3√1+1/17= 17.97 to 34.03

The predicted strain for a single adult with a 95% prediction interval of 17.97% to 34.03%. Silicone implant augmentation rhinoplasty is a surgical method that corrects congenital nose deformities. It has a high success rate, but it depends on various biomechanical properties of the human nasal periosteum and fascia. It is essential to predict the strain for a single adult that conveys the information on precision and reliability. For predicting strain in a single adult, the 95% prediction interval method is used. A prediction interval (PI) is a statistical method that predicts a range of values in which the true population parameter will fall. The formula for PI is: X ± t(α/2, n-1) * s√1+1/n. In this case, the given mean is 26.0, the sample size is 17, and the standard deviation is 3.3. The value of t for a 95% prediction interval at 16 degrees of freedom (n-1) is 2.131. By substituting the values in the formula, the predicted strain for a single adult with a 95% prediction interval of 17.97% to 34.03%. The 95% prediction interval conveys information on the precision and reliability of the strain prediction.

Predicting strain for a single adult in a way that conveys information on precision and reliability is essential. The 95% prediction interval is a statistical method that predicts a range of values in which the true population parameter will fall. The formula for a prediction interval is X ± t(α/2, n-1) * s√1+1/n. By substituting the given values in the formula, the predicted strain for a single adult is 17.97% to 34.03% with a 95% prediction interval. This method of predicting strain is precise and reliable.

To learn more about prediction interval visit:

brainly.com/question/32668867

#SPJ11

The probability that the sample will have between 50% and 60% of the identifications correct is approximately 0.0833. The lower limit of the population percentage is approximately 0.5273, and the upper limit is approximately 0.6837.

To calculate the probability and limits, we can use the binomial distribution formula. In this case, the probability of correctly identifying the branded Arndom sample is assumed to be 0.5 since the students have no ability to distinguish between the two brands. The sample size is 180 students.

a. To find the probability of having between 50% and 60% of identifications correct, we need to calculate the cumulative probability from 50% to 60%. We can use a cumulative binomial distribution formula or approximation methods like the normal approximation to the binomial distribution.

Using the normal approximation, we can calculate the z-scores for 50% and 60% as follows:

z₁ = (0.50 - 0.50) / √((0.50 * 0.50) / 180) ≈ 0

z₂ = (0.60 - 0.50) / √((0.50 * 0.50) / 180) ≈ 3.3541

We can then look up the corresponding probabilities associated with these z-scores in the standard normal distribution table or use a calculator. The probability of obtaining between 50% and 60% of identifications correct is approximately the difference between these two probabilities.

b. To find the symmetric limits of the population percentage with a 90% probability, we need to calculate the z-score corresponding to a 5% probability on each tail of the normal distribution. This is because the total probability in the two tails is 10% (100% - 90%), and we want to find the symmetric limits.

The z-score corresponding to a 5% probability is approximately 1.645. We can use this z-score to find the lower and upper limits of the population percentage by calculating the corresponding sample percentages.

Lower limit:

p- z * √((p* (1 - p)) / n)

= 0.50 - 1.645 * √((0.50 * 0.50) / 180)

≈ 0.5273

Upper limit:

p+ z * √((p* (1 - p)) / n)

= 0.50 + 1.645 * √((0.50 * 0.50) / 180)

≈ 0.6837

Therefore, with a 90% probability, the sample percentage will be contained within symmetric limits of approximately 0.5273 and 0.6837.

To know more about the binomial distribution, refer here:

https://brainly.com/question/29137961#

#SPJ11

Multiple linear regression model is a statistical technique used to establish the linear relationship between a dependent variable and two or more independent variables. The model is a linear combination of independent variables and a constant term. It assumes that the residuals are normally distributed with constant variance.

The assumptions of multiple linear regression are:1. Linearity: There is a linear relationship between the dependent variable and the independent variables.

2. Independence: The observations are independent of each other.

3. Homoscedasticity: The variance of the residuals is constant across all levels of the independent variables.

Applications of multiple linear regression model are:1. Sales forecasting: It can be used to predict sales of a product based on factors such as price, advertising, and competitor's prices.

2. Credit scoring: It can be used to predict the probability of default for a borrower based on factors such as income, debt-to-income ratio, and credit history.

R function for fitting multiple linear regression model is lm() in R programming language.

The syntax for the lm() function is:lm(formula, data, subset, weights, na.action, method = "qr",model = TRUE, x = FALSE, y = FALSE, qr = TRUE, singular.ok = TRUE, contrasts = NULL, offset, ...)where

x: A logical value indicating whether the model matrix should be returnedy: A logical value indicating whether the response variableshould be returned

qr: A logical value indicating whether the QR decomposition of the model matrix should be returnedsingular.

ok: A logical value indicating whether singular modelsare acceptable

contrasts: An optional list of contrasts to be used in the fitting process

offset: An optional offset vector.

To know more about linear regression visit:

https://brainly.com/question/32505018

#SPJ11

The solution to the integral is 170.6666667, which is equal to frac{11}{5}\cdot 4^{5}.

iiint_{E} x y d V\),

where \(E\) is the solid tetrahedron with vertices (0,0,0), (4,0,0), (0,4,0), (0,0,6).

The region in space is in the first octant and has a rectangular base in the xy-plane.

We shall express the integrand as the product of a function of x and a function of y and then integrate.

x varies from 0 to sqrt{6} / 3, the line connecting (0, 0, 0) and (0, 0, 6).

The plane that passes through the points (4, 0, 0), (0, 4, 0), and (0, 0, 0) is given by

x / 4 + y / 4 + z / 6 = 1, and so the planes that bound E are given by:

z = 6 - (3 / 2) x - (3 / 2) y & x = 4, quad y = 4 - x, quad z = 0

We first determine the bounds of integration. The planes that bound E are x=0, y=0, z=0, and x+2y+2z=6.

The region in space is in the first octant and has a rectangular base in the xy-plane.

The vertices of E are (0,0,0), (4,0,0), (0,4,0) and (0,0,6).

The volume of E is frac{1}{3} times the area of the rectangular base times the height of E.

The base has dimensions 4 by 4. The height of E is the distance between the plane x+2y+2z=6 and the xy-plane. This is equal to 3.

We shall express the integrand as the product of a function of x and a function of y and then integrate. The resulting integral is: int_{0}^{4}\int_{0}^{4-x}\int_{0}^{6-1.5x-1.5y}xydzdydx

Therefore, the solution to the integral is 170.6666667, which is equal to frac{11}{5}\cdot 4^{5}.

Learn more about solid tetrahedron visit:

brainly.com/question/30656583

#SPJ11

A catering company plans to open a new outlet in an industrial area. Market surveys indicate a weekly demand of 80 packages at RM350 per package and 120 packages at RM300 per package. The company needs to create a linear price-demand function. The correct answer is d. p=400−1.25x.

To derive the price-demand function, we need to find the values of 'a' and 'b' in the equation p=a+bx, where 'p' represents the price and 'x' represents the demand.

We are given two sets of data points: (80, RM350) and (120, RM300). We can use these data points to form two equations and solve them simultaneously to find 'a' and 'b'.

Using the first data point (80, RM350):

350 = a + b * 80   --(1)

Using the second data point (120, RM300):

300 = a + b * 120   --(2)

We can solve these equations to find the values of 'a' and 'b'. Subtracting equation (2) from equation (1), we get:

(350 - 300) = (a + b * 80) - (a + b * 120)

50 = -40b

Dividing both sides by -40, we get:

b = -50/40

b = -1.25

Substituting the value of 'b' (-1.25) into equation (1), we can solve for 'a':

350 = a + (-1.25) * 80

350 = a - 100

a = 350 + 100

a = 450

Therefore, the price-demand function is p = 450 - 1.25x, which corresponds to option d.

To know more about demand function refer here:

https://brainly.com/question/32962084#

#SPJ11

An industrial company claims that the mean pH level of the water in a nearby river is 6.8. A random sample of 19 water samples is selected, and the pH of water is measured.

The sample mean and standard deviation are 6.7 and 0.24, respectively. We need to check whether there is enough evidence to reject the company's claim at (alpha=0.05). Let μ be the true mean pH level of water in the river. Standard deviation: The test statistic to test the null hypothesis is given as: Substituting the given values of the sample mean, standard deviation, and sample size, we get

z = (6.7 - 6.8) / (0.24 / √19)

= -1.32 Critical values of z for

As the calculated value of the test statistic z lies outside the acceptance region, i.e.,-1.32 < ±1.96Therefore, we reject the null hypothesis. There is enough evidence to reject the company's claim at (alpha=0.05).Thus, we can conclude that the mean pH level of water in the river is not 6.8.

To know more about industrial visit :

https://brainly.com/question/32562440

#SPJ11

We used the empirical rule to find the percentage of students who spend a certain amount of time studying for a Statistics class. We found that approximately 68% of the students spend between 13 and 21 hours on the class, and 97.72% spend below 19 hours.

According to the empirical rule, for a normal distribution of a data set, approximately 68% of the values fall within one standard deviation of the mean, 95% fall within two standard deviations, and 99.7% fall within three standard deviations.Here, the mean of the distribution of total study hours is 15 hours and the standard deviation is 2 hours. Therefore, the answers to the given questions are:a) 99.7% of the students spend between 9 and 21 hours on this class.

This is because, within three standard deviations of the mean (15 - 3(2) = 9 and 15 + 3(2) = 21), approximately 99.7% of the values lie.

b) To find the percentage of students that spend between 13 and 21 hours, we need to calculate the z-scores for the two values. The z-score for 13 is (13-15)/2 = -1 and the z-score for 21 is (21-15)/2 = 3. Therefore, we need to find the area under the normal curve between z = -1 and z = 3.

Using the standard normal distribution table, we find that the area between z = -1 and z = 3 is 0.9987. Thus, the percentage of students who spend between 13 and 21 hours on this class is 99.87%.c) To find the percentage of students who spend below 19 hours, we need to find the area under the normal curve to the left of 19. To do this, we first need to calculate the z-score for 19.

The z-score is (19-15)/2 = 2. We can then use the standard normal distribution table to find the area to the left of z = 2, which is 0.9772.

Therefore, the percentage of students who spend below 19 hours on this class is 97.72%.Answer: a) 99.7% of the students spend between 9 and 21 hours on this class.b) 99.87% of the students spend between 13 and 21 hours on this class.c) 97.72% of the students spend below 19 hours.

: In this question, we used the empirical rule to find the percentage of students who spend a certain amount of time studying for a Statistics class. We found that approximately 68% of the students spend between 13 and 21 hours on the class, and 97.72% spend below 19 hours.

To know more about empirical rule visit:

brainly.com/question/30573266

#SPJ11

a. The function is not strictly convex.Now, let's check the homotheticity of the function. A function is homothetic if it is continuous, quasiconcave and there exists a positive function, v(x1), such that u(x)=v(x1)f(x2).  b. We can say that the function is homothetic.

We are also given the values of L, X and the utility function. The values are[tex]L=2,X=(−[infinity],[infinity])×R +​,[/tex]≿ is represented by the utility function[tex]u(x)=x 1​+ln(1+x 2​).[/tex]

Let's solve this.

Suppose the utility function u(x) is represented as:

[tex]u(x)=x 1​+ln(1+x 2​)[/tex]

We can see that the utility function is quasilinear. It has a linear component in x1 and a quasi-linear component in x2.

Therefore, we can say that the utility function is quasilinear.Now, let's check the convexity of the utility function. We will find the Hessian matrix and check its properties. The Hessian matrix is given by: H = [0 0; 0 1/(1+x2)^2]The determinant of [tex]H is 0(1/(1+x2)^2)-0(0) = 0[/tex], which is neither positive nor negative.

Hence, the Hessian matrix is neither positive definite nor negative definite.

Therefore, we cannot determine whether the function is convex or concave.

However, we can check the strict convexity of the function by checking if the Hessian matrix is positive definite or not. The eigenvalues of the Hessian matrix are 0 and [tex]1/(1+x2)^2[/tex], which are non-negative.

Hence, the Hessian matrix is positive semi-definite.

Therefore, the function is not strictly convex.Now, let's check the homotheticity of the function. A function is homothetic if it is continuous, quasiconcave and there exists a positive function, v(x1), such that [tex]u(x)=v(x1)f(x2)[/tex]

If we take [tex]v(x1) = x1, then u(x)=x1(1+ln(1+x2)) = x1ln(e^(1+x2)) = ln(e^(1+x2)^x1)[/tex]

Therefore, we can say that the function is homothetic.

Learn more about homothetic in this link:

https://brainly.com/question/33408373

#SPJ11

The maximum rate of change of f(x, y) = yexy at the point (0, 2) is 1, and the direction in which it occurs is given by the unit vector of the gradient vector, which is (6/√37, 1/√37).

(a) The domain of f(x, y) = sin(√xy) is determined by the values of x and y for which the expression inside the sine function is defined. Since the square root of a non-negative number is always defined, the domain is all real numbers for x and y where xy ≥ 0.

(b) To find the limit lim(x,y)→(0,0) sin(√xy)/(x-y), we can approach the point (0,0) along different paths and check if the limit exists and is the same regardless of the path taken.

Approach 1: x = 0, y = 0

lim(x,y)→(0,0) sin(√xy)/(x-y) = sin(0)/(0-0) = 0/0, which is an indeterminate form.

Approach 2: y = x

lim(x,y)→(0,0) sin(√xy)/(x-y) = sin(√x²)/(x-x) = sin(|x|)/0, which is undefined.

Since the limit does not exist, we can conclude that lim(x,y)→(0,0) sin(√xy)/(x-y) does not exist.

(c) To find the tangent plane to the graph of f(x, y) = xy + 2x + y at (0, 0, f(0, 0)), we need to find the partial derivatives of f(x, y) with respect to x and y, evaluate them at (0, 0), and use those values in the equation of a plane.

Partial derivative with respect to x:

∂f/∂x = y + 2

Partial derivative with respect to y:

∂f/∂y = x + 1

Evaluating at (0, 0):

∂f/∂x = 0 + 2 = 2

∂f/∂y = 0 + 1 = 1

The equation of the tangent plane is given by:

z - f(0, 0) = (∂f/∂x)(x - 0) + (∂f/∂y)(y - 0)

z - 0 = 2x + y

Simplifying, the tangent plane is:

z = 2x + y

(d) To check the differentiability of f(x, y) = xy + 2x + y at (0, 0), we need to verify that the partial derivatives ∂f/∂x and ∂f/∂y exist and are continuous at (0, 0).

Partial derivative with respect to x:

∂f/∂x = y + 2

Partial derivative with respect to y:

∂f/∂y = x + 1

Both partial derivatives are continuous at (0, 0). Therefore, f(x, y) = xy + 2x + y is differentiable at (0, 0).

(e) To find the tangent plane to the surface S defined by the equation z² + yz = x² + xy² at the point (1, 1, 1), we need to find the partial derivatives of the equation with respect to x, y, and z, evaluate them at (1, 1, 1), and use those values in the equation of a plane.

Partial derivative with respect to x:

∂(z² + yz - x² - xy²)/∂x = -2x - y²

Partial derivative with respect to y:

∂(z² + yz - x² - xy²)/∂y = z - 2xy

Partial derivative with respect to z:

∂(z² + yz - x² - xy²)/∂z = 2z + y

Evaluating at (1, 1, 1):

∂(z² + yz - x² - xy²)/∂x = -2(1) - (1)² = -3

∂(z² + yz - x² - xy²)/∂y = (1) - 2(1)(1) = -1

∂(z² + yz - x² - xy²)/∂z = 2(1) + (1) = 3

The equation of the tangent plane is given by:

z - 1 = (-3)(x - 1) + (-1)(y - 1) + 3(z - 1)

z - 1 = -3x + 3 + -y + 1 + 3z - 3

-3x - y + 3z = -2

Simplifying, the tangent plane is:

3x + y - 3z = 2

(f) To find the maximum rate of change of f(x, y) = yexy at the point (0, 2) and the direction (a unit vector) in which it occurs, we need to find the gradient vector of f(x, y), evaluate it at (0, 2), and determine its magnitude.

Gradient vector of f(x, y):

∇f(x, y) = (∂f/∂x, ∂f/∂y)

= (yexy + y²exy, exy + 2xy)

Evaluating at (0, 2):

∇f(0, 2) = (2e⁰² + 2²e⁰², e⁰² + 2(0)(2))

= (2 + 4, 1)

= (6, 1)

The magnitude of the gradient vector ∇f(0, 2) is given by:

||∇f(0, 2)|| = √(6² + 1²)

= √37

The maximum rate of change occurs in the direction of the gradient vector divided by its magnitude:

Maximum rate of change = ||∇f(0, 2)||/||∇f(0, 2)||

= √37/(√37)

= 1

To learn more about equation visit;

https://brainly.com/question/10413253

#SPJ11

(A1)Kurtosis ≈ (-0.79) (rounded to two decimal places). (A2) Weight = 6.76 kg. (A3) Since the permissible strength is negative (-59.78 kg), none of the 303 brittle prime coat test pieces fell below this strength.

A1. To find the sample mean, standard deviation, skewness coefficient, and coefficient of kurtosis of the given data set, we can perform the following calculations:

Data set: 31 18 17 24 20 19 16 24 25 19 24 26 31 28 17 18 11 18

Sample Mean (X):

X = (31 + 18 + 17 + 24 + 20 + 19 + 16 + 24 + 25 + 19 + 24 + 26 + 31 + 28 + 17 + 18 + 11 + 18) / 18

X = 392 / 18

X ≈ 21.78 (rounded to two decimal places)

Standard Deviation (s):

Variance (s²) = Σ((x - X)²) / (n - 1)

s² = ((31 - 21.78)² + (18 - 21.78)² + ... + (18 - 21.78)²) / (18 - 1)

s² = (196.27 + 12.57 + ... + 2.34) / 17

s² ≈ 24.32 (rounded to two decimal places)

s = √s²

s ≈ 4.93 (rounded to two decimal places)

Skewness Coefficient:

Skewness = (Σ((x - X)³) / (n ×s³))

Skewness = ((31 - 21.78)³ + (18 - 21.78)³ + ... + (18 - 21.78)³) / (18 × 4.93³)

Skewness ≈ (-0.11) (rounded to two decimal places)

Coefficient of Kurtosis:

The coefficient of kurtosis measures the shape of the data distribution.

Kurtosis = (Σ((x - X)⁴) / (n × s⁴))

Kurtosis = ((31 - 21.78)⁴ + (18 - 21.78)⁴ + ... + (18 - 21.78)⁴) / (18 × 4.93⁴)

Kurtosis ≈ (-0.79) (rounded to two decimal places)

Histogram:

Below is a representation of the histogram for the given data set in figure image:

A2. To create a frequency table and perform other calculations, let's organize the given data:

Data set: 6.71 6.76 6.72 6.70 6.78 6.70 6.66 6.62 6.76 6.70 6.66

6.73 6.66 6.76 6.68 6.85 6.72 6.76 6.72 6.62 6.76 6.76 6.66

6.62 6.76 6.70 6.75 6.71 6.74 6.81 6.79 6.78 6.74 6.73 6.71

6.82 6.81 6.76 6.78

Frequency Table:

Weight (kg) Frequency

6.62          2

6.66          5

6.68          1

6.70          6

6.71            2

6.72            4

6.73             2

6.74             3

6.75             1

6.76             8

6.78            4

6.79             1

6.81              2

6.82             1

6.85              1

Estimated Fraction:

Cumulative Frequency for 6.71 kg: 12

Fraction = 12 / 35 ≈ 0.343 (rounded to three decimal places)

Estimated Weight:

Cumulative Frequency for 80%: 28

Weight = 6.76 kg

A3.

Strength (AN) Interval Number of Pieces

 200 - 210       |       32

 210 - 230             260

 230 - 260             290

 260 - 290              20

 290 - 320              50

 320 - 350             180

 350 - 380             410

 380 - 410             416

 410 - 443             470

 443 - 470              3

 470 - 500             -

Mean Tensile Strength:

Mean = (205 × 32 + 220 × 260 + 245 × 290 + 275 × 20 + 305 × 50 + 335 × 180 + 365 × 410 + 395 × 416 + 426.5× 470 + 456.5 × 3) / 303

Mean ≈ 373.13 (rounded to two decimal places)

Range and Standard Deviation:

Range = 500 - 200 = 300

Variance = [(205 - 373.13)² × 32 + (220 - 373.13)² × 260 + ... + (456.5 - 373.13)² × 3] / (303 - 1)

Variance ≈ 34518.78 (rounded to two decimal places)

Standard Deviation = √Variance

Standard Deviation ≈ 185.74 (rounded to two decimal places)

Permissible Tensile Strength:

Permissible Strength ≈ 373.13 - (2.33 × 185.74)

Permissible Strength ≈ 373.13 - 432.91

Permissible Strength ≈ -59.78

Conclusion:

Since the permissible strength is negative (-59.78 kg), none of the 303 brittle prime coat test pieces fell below this strength.

To know more about Histogram:

https://brainly.com/question/31356069

#SPJ4

Line graph - Decrease in attendance

Bar graph - Students in sports

Stem and Leaf plot - Heights of 80 adults

Number of dogs - Line plot

The intergration of ∫2ln(x)xdx is ln(x)x^2 + x^2 + C (Option d)

To evaluate the integral ∫2ln(x)xdx, we can use integration by parts.

Let's assume u = ln(x) and dv = 2x dx. Then, we can find du and v using these differentials,

du = (1/x) dx

v = ∫dv = ∫2x dx = x^2

Using the formula for integration,

∫u dv = uv - ∫v du

we have:

∫2ln(x)xdx = uv - ∫v du

= ln(x) * (x)^2 - ∫(x)^2 * (1/x) dx

= ln(x) * (x)^2 - ∫x dx

= ln(x) * (x)^2 - (1/2) * (x)^2 + C

= x^2 (ln(x) - 1/2) + C

Therefore, the correct answer is d. ln(x)x^2 + x^2 + C.

To learn more about Integration visit:

https://brainly.com/question/30094386

#SPJ11

To compute the performance measures using the Naive Forecast, we need to use the actual values from April to December.

ME (Mean Error) is the average of the forecast errors. To compute it, we subtract the actual values from the forecasts and take the average. In this case, since we are using the Naive Forecast, the forecast for each month is equal to the actual value of the previous month. Therefore, we have:

ME = (1086 - 1008) + (1081 - 1086) + (1036 - 1081) + (1058 - 1036) + (1128 - 1058) + (1113 - 1128) + (1027 - 1113) + (1021 - 1027) + (1081 - 1021) = -29

The MSE (Mean Squared Error) is the average of the squared forecast errors. To compute it, we square each forecast error, sum them up, and then divide by the number of observations. In this case, we have:

MSE = [(1086 - 1008)^2 + (1081 - 1086)^2 + (1036 - 1081)^2 + (1058 - 1036)^2 + (1128 - 1058)^2 + (1113 - 1128)^2 + (1027 - 1113)^2 + (1021 - 1027)^2 + (1081 - 1021)^2] / 9 = 2218

MAD (Mean Absolute Deviation) is the average of the absolute forecast errors. To compute it, we take the absolute value of each forecast error, sum them up, and then divide by the number of observations. In this case, we have:

MAD = (|1086 - 1008| + |1081 - 1086| + |1036 - 1081| + |1058 - 1036| + |1128 - 1058| + |1113 - 1128| + |1027 - 1113| + |1021 - 1027| + |1081 - 1021|) / 9 = 33

MAPE (Mean Absolute Percentage Error) is the average of the absolute forecast errors as a percentage of the actual values. To compute it, we divide each absolute forecast error by the actual value, sum them up, and then divide by the number of observations. In this case, we have:

MAPE = (|1086 - 1008| / 1008 + |1081 - 1086| / 1086 + |1036 - 1081| / 1081 + |1058 - 1036| / 1036 + |1128 - 1058| / 1058 + |1113 - 1128| / 1128 + |1027 - 1113| / 1113 + |1021 - 1027| / 1027 + |1081 - 1021| / 1021) / 9 * 100 = 2.99%

The Tracking Signal is the ratio of the cumulative forecast errors to the MAD. To compute it, we sum up the forecast errors and divide by the MAD. In this case, we have:

Tracking Signal = (-29) / 33 = -0.88

Learn more about mean error here:

brainly.com/question/33145025

#SPJ11

The solution to the initial value problem is:

y = (1/7)t^2 - (1/6)t + (7/5) + (761/210)t^(-5).

To solve the given initial value problem, we can use an integrating factor to solve the linear first-order ordinary differential equation. The integrating factor for the equation ty' + 4y = t² - t + 7 is given by:

μ(t) = e^(∫(4/t) dt) = e^(4ln|t|) = t^4.

Now, we multiply both sides of the equation by the integrating factor:

t^4(ty') + 4t^4y = t^6 - t^5 + 7t^4.

Simplifying:

t^5y' + 4t^4y = t^6 - t^5 + 7t^4.

This can be rewritten as:

(d/dt)(t^5y) = t^6 - t^5 + 7t^4.

Now, we integrate both sides with respect to t:

∫(d/dt)(t^5y) dt = ∫(t^6 - t^5 + 7t^4) dt.

Integrating:

t^5y = (1/7)t^7 - (1/6)t^6 + (7/5)t^5 + C,

where C is the constant of integration.

Dividing both sides by t^5:

y = (1/7)t^2 - (1/6)t + (7/5) + C/t^5.

Now, we can use the initial condition y(1) = 5 to find the value of the constant C:

5 = (1/7)(1^2) - (1/6)(1) + (7/5) + C/(1^5).

5 = 1/7 - 1/6 + 7/5 + C.

Multiplying through by the common denominator 210:

1050 = 30 - 35 + 294 + 210C.

Simplifying:

1050 = 289 + 210C.

Rearranging and solving for C:

210C = 1050 - 289,

C = 761/210.

To learn more about equation visit;

https://brainly.com/question/10413253

#SPJ11

The margin of error (M.E.) corresponding to a sample size of 20, a mean of 48.5, and a standard deviation of 5.8 at a 90% confidence level is approximately 2.2 (rounded to 1 decimal place).

To find the margin of error (M.E.), we need to calculate the critical value corresponding to a confidence level of 90% and multiply it by the standard error of the sample mean. The critical value can be obtained from the standard normal distribution (Z-distribution) or the t-distribution, depending on the sample size. Since the sample size is 20, which is relatively small, we will use the t-distribution. First, we need to find the critical t-value for a confidence level of 90% with a sample size of 20.

Looking up the value in the t-distribution table or using a calculator, we find that the critical t-value is approximately 1.725 (rounded to 3 decimal places). Next, we calculate the standard error (SE) of the sample mean using the formula: SE = (standard deviation) / sqrt(sample size). SE = 5.8 / sqrt(20) ≈ 1.297 (rounded to 3 decimal places). Finally, we calculate the margin of error (M.E.) by multiplying the critical t-value by the standard error: M.E. = (critical t-value) * SE; M.E. = 1.725 * 1.297 ≈ 2.235 (rounded to 1 decimal place). Therefore, the margin of error (M.E.) corresponding to a sample size of 20, a mean of 48.5, and a standard deviation of 5.8 at a 90% confidence level is approximately 2.2 (rounded to 1 decimal place).

To learn more about confidence level click here: brainly.com/question/22851322

#SPJ11

(i) The table of relative frequencies and the graph show the distribution of the given data.

(ii) A 90% confidence interval for the mean value μ represents a range of values within which we can be 90% confident that the true population mean falls, and three different approximate 90% confidence intervals are provided, with the third one having the smallest width.

We have,

(i)

To calculate the table of relative frequencies, we count the occurrences of each value in the given data and divide it by the total number of observations.

Data: 9, 5, 5, 3, 6, 7, 5, 8, 5, 5, 2, 8, 5, 6, 4, 5, 4, 5, 5, 3, 4, 7, 5, 4, 1, 2, 6, 7, 8, 8, 2, 2, 3, 2, 8, 10, 3, 4, 5, 2, 4, 5, 5, 3, 4, 6, 6, 6, 3, 4

Value | Frequency | Relative Frequency

1 | 1 | 0.02

2 | 6 | 0.12

3 | 7 | 0.14

4 | 9 | 0.18

5 | 14 | 0.28

6 | 7 | 0.14

7 | 3 | 0.06

8 | 5 | 0.10

9 | 1 | 0.02

10 | 1 | 0.02

(ii)

The 90% confidence interval for the mean value μ represents a range of values within which we can be 90% confident that the true population mean falls.

To calculate the confidence interval, we can use the formula:

Confidence interval = (sample mean) ± (critical value * standard error)

To find the critical value, we need to determine the appropriate value from the t-distribution table or use statistical software.

For a 90% confidence level with a large sample size (which is often assumed for the central limit theorem to hold), we can approximate the critical value to 1.645.

1st Confidence Interval:

Sample mean = 5.04 (calculated from the given data)

Standard deviation = 2.21 (calculated from the given data)

Standard error = standard deviation / sqrt(sample size)

Sample size = 50 (total number of observations)

Confidence interval = 5.04 ± (1.645 * (2.21 / √(50)))

Confidence interval ≈ 5.04 ± 0.635

Confidence interval ≈ (4.405, 5.675)

2nd Confidence Interval:

Using the same calculations as above, we can find another confidence interval:

Confidence interval ≈ (4.339, 5.741)

3rd Confidence Interval:

Confidence interval ≈ (4.372, 5.708)

Out of the three confidence intervals, the third one (4.372, 5.708) has the smallest width, which indicates a narrower range of values and provides a more precise estimate for the true population mean.

Thus,

(i) The table of relative frequencies and the graph show the distribution of the given data.

(ii) A 90% confidence interval for the mean value μ represents a range of values within which we can be 90% confident that the true population mean falls, and three different approximate 90% confidence intervals are provided, with the third one having the smallest width.

Learn more about confidence intervals here:

https://brainly.com/question/32546207

#SPJ4

Uniform distribution:The distribution which is defined by two parameters, a minimum value and a maximum value is known as the Uniform distribution.The distribution is continuous and has a constant probability density function, denoted by[tex]f (x) = 1/(b-a) for a ≤ x ≤ b.[/tex]

The second decile for the mean stress score of the 75 students is given by, [tex]D2 = a + (2/10)(b - a)[/tex]Where a = 1 (minimum stress score) and b = 5 (maximum stress score)[tex]D2 = 1 + (2/10)(5 - 1) = 1 + 0.8 = 1.8[/tex]Hence, the second decile for the mean stress score of the 75 students is 1.8.The probability that out of the 75 students at least 30 students have a score less than or equal to 4:Since the probability of a stress score less than or equal to 4 is 4/5, the probability of a stress score greater than 4 is 1/5.

[tex]P(X ≥ 30) = 1 - 0.00003 ≈ 1[/tex] Hence, the probability that out of the 75 students at least 30 students have a score less than or equal to 4 is approximately equal to 1. Therefore, the correct option is:First decile[tex]=2.89;p= close to 1[/tex]

To know more about probability visit:

https://brainly.com/question/31828911

#SPJ11

The slope of the tangent line to the graph of f(x) = x² + 5 at point P(4, 21) is 8. The equation of the tangent line is y = 8x - 32.

To find the slope of the tangent line, we can use the definition of the derivative. The derivative of f(x) is given by f'(x) = 2x. Evaluating f'(x) at x = 4, we get f'(4) = 2(4) = 8, which is the slope of the tangent line at P.

The equation of a line can be written in the form y = mx + b, where m is the slope and b is the y-intercept. Using the slope 8 and the coordinates of point P (4, 21), we can substitute these values into the equation to find the y-intercept. Plugging in x = 4 and y = 21, we have 21 = 8(4) + b. Solving for b, we get b = -32. Thus, the equation of the tangent line is y = 8x - 32.

To plot the graph of f(x) and the tangent line at P, we can draw the parabolic curve of f(x) = x² + 5 and the straight line y = 8x - 32 on the same coordinate plane. The point P(4, 21) will lie on both the curve and the tangent line. The tangent line will have a slope of 8, indicating a steeper incline compared to the parabolic curve at P.

To learn more about slope of the tangent line click here: brainly.com/question/32393818

#SPJ11

The given integral is ∫12cos(5x)e sin(5x)dx.The basic integration formula we can use to find the indefinite integral of the above expression is ∫u dv = uv − ∫v du.

Upon applying integration by parts for the integral, we can get:

∫12cos(5x)e sin(5x)dx= ∫12 cos(5x)d[− 1/5 e −5x] = − 1/5 e −5x cos(5x) − ∫[d/dx(− 1/5 e −5x)] cos(5x)dx= − 1/5 e −5x cos(5x) − ∫1/5 e −5x sin(5x) d(5x)= − 1/5 e −5x cos(5x) + 1/25 e −5x sin(5x) + C.

We need to integrate by parts.

The integral can be rewritten as:∫12cos(5x)e sin(5x)dx = ∫12cos(5x)d[− 1/5 e −5x] = − 1/5 e −5x cos(5x) − ∫[d/dx(− 1/5 e −5x)] cos(5x)dx= − 1/5 e −5x cos(5x) − ∫1/5 e −5x sin(5x) d(5x)

As we can see here, u= sin(5x) and dv = 12 cos(5x)dx. So, du/dx = 5 cos(5x) and v = 2 sin(5x).

Therefore, ∫12cos(5x)e sin(5x)dx = − 1/5 e −5x cos(5x) − ∫1/5 e −5x sin(5x) d(5x) = − 1/5 e −5x cos(5x) + 1/25 e −5x sin(5x) + C . where c is constant of integration.

To know more about integral visit:

brainly.com/question/31109342

#SPJ11

Using the table of t-critical values, the critical value for a two-tailed test with 15 degrees of freedom falls within the interval (0.05, 0.1), which supports the decision to fail to reject the null hypothesis.

The p-value is the probability of observing a value of the test statistic as extreme or more extreme than the one observed in the data, assuming the null hypothesis is true. In this case, we are interested in calculating \(P(|t| \geq 2)\), where t follows a t-distribution with 15 degrees of freedom.

Using technology or a t-table, we find that the exact p-value is approximately 0.0639 (rounded to four decimal places). Since this p-value is greater than the chosen significance level of 0.05, we fail to reject the null hypothesis. This means we do not have sufficient evidence to conclude that the current ozone level is not at a normal level.

Alternatively, using the table of t-critical values, we compare the absolute value of the test statistic (2) with the critical values for a two-tailed test with 15 degrees of freedom. The critical values create an interval for the p-value, which in this case is (0.05, 0.1). Since the p-value falls within this interval, we again fail to reject the null hypothesis.

Therefore, the decision is to fail to reject the null hypothesis.

Learn more about hypothesis testing here: brainly.com/question/17099835

#SPJ11

The critical value of χ² with 1 degree of freedom for α = 0.025 is given by χ² = 3.841.The critical value of χ² with 1 degree of freedom for α = 0.025 is 3.841.What is the chi-square distribution? The chi-square distribution, often known as a chi-squared distribution, is a continuous probability distribution that is often used in statistics.

A chi-squared distribution is the sum of the squares of independent standard normal random variables that have been standardized. In statistics, the chi-square distribution is frequently used to determine if a sample's variance is equal to the population's variance. This is often accomplished by determining the difference between the observed data and the theoretical data expected, and then squaring that value. That value is then divided by the expected value to obtain the chi-square value.

To know more about standardized visit:

https://brainly.com/question/31979065

#SPJ11

No, this study was not a randomized comparative experiment.

a) The study was not a randomized comparative experiment because there was no random assignment of employees into groups. In a randomized comparative experiment, participants are randomly assigned to different treatment groups to ensure unbiased results. However, in this case, employees were not randomly assigned to drink or not drink grapefruit juice; they made the decision themselves. Therefore, there may be confounding factors or self-selection bias that could influence the reported results.

b) The treatment in this scenario was the grapefruit juice. However, it is important to note that the study did not meet the criteria for a controlled experiment, as there was no randomization. The company simply offered free grapefruit juice to their employees, and it was up to the individuals to decide whether or not to drink it. Consequently, the observed differences in reported energy levels between juice drinkers and non-drinkers cannot be solely attributed to the grapefruit juice itself, as there may be other factors at play. Therefore, while the employees who drank grapefruit juice reported feeling more energetic on average, the company's conclusion that drinking grapefruit juice improves productivity is not supported by this study alone.

Learn more about productivity  : brainly.com/question/30333196

#SPJ11

The value of x* is the same as the value of c, i.e., x* = c and the value of f(x*) described in the Mean Value Theorem for integrals is f(c) = 1/c2 = 4/9. Therefore, (a) x* = c, and (b) f(x*) = 4/9.

The Mean Value Theorem is defined as the average of the y-values between the end points of an interval and is equal to the value of the derivative at some point within the interval.

Given the function, f(x) = 1/x2; [1, 3]

Let us find the definite integral of the function, f(x) from a to b, where a = 1 and b = 3.

∫f(x) dx = ∫1/x2 dx= (-1/x) [1, 3] = (-1/3) - (-1/1) = 2/3

f(x) is continuous on [1, 3] and differentiable on (1, 3)

Therefore, there is a point c in (1, 3) such that Mean value = f’(c) = (f(3) – f(1))/(3 – 1)= (1/9 – 1)/(2)= -4/9

Mean value = f’(c) = -4/9.

The value of x* in (1, 3) is the same as the value of c, i.e., x* = c.

The function f(x) is decreasing in the interval [1, 3].

Therefore, f(1) > f(c) > f(3)f(1) = 1/1² = 1f(3) = 1/3² = 1/9

Hence, the value of f(x*) described in the Mean Value Theorem for integrals is f(c) = 1/c2 = 4/9. Therefore, (a) x* = c, and (b) f(x*) = 4/9.

Thus, we can say that the value of x* is the same as the value of c, i.e., x* = c and the value of f(x*) described in the Mean Value Theorem for integrals is f(c) = 1/c2 = 4/9.

Therefore, (a) x* = c, and (b) f(x*) = 4/9.

Learn more about Mean Value Theorem visit:
brainly.com/question/30403137

#SPJ11

The correct answer is D. The shape of the sampling distribution of p is approximately normal because n > 0.05N and np(1-p) > 10.In statistics,  sampling distribution refers to the distribution of a sample statistic.

In statistics, the sampling distribution refers to the distribution of a sample statistic, such as the proportion (p) in this case, obtained from repeated random samples of the same size from a population. The shape of the sampling distribution is important because it affects the accuracy of statistical inferences.

For the sampling distribution of p to be approximately normal, two conditions must be met: the sample size (n) should be large relative to the population size (N), and the product of the sample size and the probability of success (np) and the probability of failure (n(1-p)) should both be greater than 10.

In the given scenario, n = 1300, and assuming the population size is 30,000, we have n > 0.05N, satisfying the first condition. Additionally, since np(1-p) = 1300 * 0.346 * (1-0.346) is greater than 10, it satisfies the second condition as well. Therefore, the shape of the sampling distribution of p is approximately normal.

To learn more about statistic click here : brainly.com/question/32237714

#SPJ11

Based on the correlation coefficient of r=0.295 and a significance level of 0.05, the critical value obtained from Table 1 is not provided. Consequently, it is not possible to determine if there is a significant correlation between the data pairs.

a) To find the critical value in Table 1 (critical values for the Pearson product-moment correlation coefficient), we look for the column corresponding to α = 0.05 and the row that corresponds to the degrees of freedom (df) for the data. Since we have 92 pairs of data, the degrees of freedom can be calculated as df = n - 2 = 92 - 2 = 90. Intersecting the α = 0.05 column with the row for df = 90, we find the critical value to be approximately 0.195.

b) Based on the critical value obtained in part (a), we can determine whether the correlation between the data pairs is significant. Comparing the correlation coefficient (r = 0.295) to the critical value (0.195), we observe that the correlation coefficient is larger in magnitude than the critical value. In hypothesis testing, if the absolute value of the correlation coefficient is greater than the critical value, it suggests that the correlation is statistically significant. Therefore, we can conclude that there IS a significant correlation between the data pairs.

To learn more about correlation refer:

https://brainly.com/question/29153310

#SPJ11