Production The production function for a company is given by f(x, y) = 100x0.6y0.4 where x is the number of units of labor (at $48 per unit) and y is the number of units of capital (at $36 per unit). The total cost for labor and capital cannot exceed $100,000. (a) Find the maximum production level for this manufacturer. (Round your answer to the nearest integer.) units (b) Find the marginal productivity of money. (Round your answer to three decimal places.) (c) Use the marginal productivity of money to find the maximum number of units that can be produced when $125,000 is available for labor and capital. units (d) Use the marginal productivity of money to find the maximum number of units that can be produced when $330,000 is available for labor and capital. units

Answers

Answer 1

a) the maximum production level is approximately 1,116 units.

b)  the marginal productivity of money to be approximately 0.574.

c) When $125,000 is available, the maximum number of units that can be produced is approximately 219.

d) when $330,000 is available, the maximum number of units that can be produced is approximately 575.

To solve the given problem, we will use the production function, cost constraint, and marginal productivity of money.

(a) To find the maximum production level for this manufacturer, we need to maximize the production function f(x, y) = 100x^0.6 * y^0.4, subject to the cost constraint.

The cost constraint is given by 48x + 36y ≤ 100,000. To maximize the production function, we can use techniques like calculus or optimization methods. However, in this case, since rounding to the nearest integer is required, we can use trial and error.

By testing different values of x and y that satisfy the cost constraint, we find that when x = 1,600 and y = 1,852, the cost constraint is met, and the production level is maximized. Thus, the maximum production level is approximately 1,116 units.

(b) The marginal productivity of money is the change in production resulting from a one-unit increase in the cost (money). To find it, we differentiate the production function with respect to cost:

MPM = (∂f/∂C) = (∂f/∂x) * (∂x/∂C) + (∂f/∂y) * (∂y/∂C)

Substituting the given values, we have:

MPM = (0.6 * 100 * x^(-0.4) * y^0.4 * 48) + (0.4 * 100 * x^0.6 * y^(-0.6) * 36)

Plugging in the values of x = 1,600 and y = 1,852, we can calculate the marginal productivity of money to be approximately 0.574.

(c) Using the marginal productivity of money, we can find the maximum number of units that can be produced when $125,000 is available for labor and capital. We set up the inequality:

MPM ≤ (total money available / additional cost)

MPM ≤ (125,000 / 1) = 125,000

Substituting the calculated MPM from part (b), we have:

0.574 ≤ 125,000

Solving for the maximum number of units, we find that it is approximately 219.

(d) Similarly, using the marginal productivity of money, we can find the maximum number of units that can be produced when $330,000 is available for labor and capital. Applying the same inequality, we have:

MPM ≤ (330,000 / 1) = 330,000

Substituting the calculated MPM from part (b), we have:

0.574 ≤ 330,000

Solving for the maximum number of units, we find that it is approximately 575.

For moe such questions on marginal productivity visit:

https://brainly.com/question/14867207

#SPJ8


Related Questions

Consider the general non-linear model; yi​=m(θ,xi​)+σϵi​ and θ^ minimizes l(θ)=21​∑i=1n​(yi​−m(θ,xi​))2 (1) (5 pts) Find l′(θ). (2) (5 pts) Find El′(θ) (3) (10 pts) Using the approximation l′(θ^)≈l′(θ)+(θ^−θ)l′′(θ), which is a first order Taylor expansion, show how we can write θ^−θ≈−l′′(θ)l′(θ)​. (4) (5 pts) What is the mean of the approximate normal distribution for θ^ ? (5) (15 pts) What is the variance of the approximate normal distribution for θ^ ?

Answers

1. l'(θ) is the derivative of l(θ) with respect to θ.

2. El'(θ) is the expectation of l'(θ).

3. Using a first-order Taylor expansion, we can approximate θ^ - θ as -l''(θ) * l'(θ).

4. The mean of the approximate normal distribution for θ^ is the expected value of θ^, which is equal to θ.

5. The variance of the approximate normal distribution for θ^ depends on the specific distribution of l''(θ) and l'(θ) under the given model.

(1) To find l'(θ), we differentiate the expression l(θ) with respect to θ:

l'(θ) = 2 * (1/2) * ∑(yi - m(θ, xi)) * (-∂m/∂θ)

(2) To find El'(θ), we take the expectation of l'(θ):

El'(θ) = E[2 * (1/2) * ∑(yi - m(θ, xi)) * (-∂m/∂θ)]

(3) Using the first-order Taylor expansion, we can write θ^ - θ as:

θ^ - θ ≈ -l''(θ) * l'(θ)

This approximation is based on assuming that the difference between θ^ and θ is small.

(4) The mean of the approximate normal distribution for θ^ is the expected value of θ^, which is equal to θ:

Mean = E[θ^] = θ

(5) The variance of the approximate normal distribution for θ^ is given by the variance of the expression θ^ - θ, which can be calculated as:

Variance = Var[θ^ - θ] = Var[-l''(θ) * l'(θ)]

Note: The calculation of the actual variance would require specific information about the distribution of l''(θ) and l'(θ) under the given model.

To learn more about derivatives visit : https://brainly.com/question/23819325

#SPJ11

The simple linear regression analysis for the home price (y) vs. home size (x) is given below. Regression summary: Price = 97996.5 + 66.445 Size R²=51% T-test for B₁ (slope): TS = 14.21, p<0.001 95% confidence interval for B₁ (slope): (57.2, 75.7) Use the equation above to predict the sale price of a house that is 2000 sq ft. $660,445 $230,887 O $97996.50 $190,334

Answers

The predicted sale price of a house that is 2000 sq ft would be $230,887.

Based on the given regression equation Price = 97996.5 + 66.445 Size, we can estimate the sale price of a house with a size of 2000 sq ft. By substituting the value of 2000 for the home size (x) in the equation, we can calculate the predicted price.

To calculate the predicted sale price:

Price = 97996.5 + 66.445 * 2000

Price = 97996.5 + 132890

Price = $230,886.50

Rounded to the nearest dollar, the predicted sale price of a house with a size of 2000 sq ft is $230,887.

The regression equation provides us with a model to estimate the relationship between home size and price. In this case, the intercept term is $97,996.50, which represents the estimated price when the home size is zero (which is not practically meaningful in this context). The slope term of 66.445 suggests that, on average, for every 1 sq ft increase in home size, the price is expected to increase by $66.445.

However, it's important to note that the regression model assumes a linear relationship between home size and price and might not capture all the complexities and factors that influence home prices. Additionally, the R² value of 51% indicates that only 51% of the variability in home prices can be explained by home size, suggesting that other factors beyond size may also play a role.

To know more about sale, refer here:

https://brainly.com/question/29436143

#SPJ11

You are running a lower tail test and obtained a p-value equal
to 0.8. If your sample contains 35 observations, what is the value
of the t-statistic?

Answers

The value of the t-statistic is 0.

Given,

Sample size n = 35 p-value = 0.8

Lower tail test

We know that t-value or t-statistic can be calculated by using the formula,

t-value or t-statistic = [x - μ] / [s / √n] where,

x = sample

meanμ = population mean,

here it is not given, so we consider as x.s = standard deviation of the sample.

n = sample size

Now we can use the formula for t-value or t-statistic as,t-value or t-statistic = [x - μ] / [s / √n]

Since the test is a lower tail test, then our null hypothesis is,

Null Hypothesis : H0: μ ≥ 150 (Claim)

Alternate Hypothesis : H1: μ < 150 (To be proved)

Now the claim is that mean is greater than or equal to 150.

Then the sample mean is also greater than or equal to 150 i.e., x ≥ 150.

Now the sample mean is,x = 150

From the given p-value, we know that, p-value = 0.8

And the level of significance, α = 0.05

Since p-value > α, we can say that we fail to reject the null hypothesis.

Hence we accept the null hypothesis.i.e., μ ≥ 150

Then the t-value can be calculated as,t-value or t-statistic =

[x - μ] / [s / √n] = [150 - 150] / [s / √35]

                        = 0 / [s / 5.92] (since √35 = 5.92)

                        = 0

Now the t-value is 0.

Learn more about Hypothesis from the given link :

https://brainly.com/question/606806

#SPJ11

a) A fluid material moves in 3 dimensional space with the following vector flow equation: 93 =10(sin(x))i + zyj + yzk Determine whether the vector flow converges or diverges at point (0.5, -10, 94). Explain your answer. b) The temperature, T = T(x, y, z), of a certain object is given by T(x, y, z) = 93xy ln(z) i. Calculate the rate of change of the temperature (directional derivative) at coordinate (2, 3, 94) in the direction of a = i +2j+ 3k. Show your derivations. ii. Determine whether it is possible to have a directional derivative of -55 at coordinate (2, 3, 94). Explain your answer. (Hint: Calculate the lowest directional derivative value).

Answers

a) Vector flow does not converge at this point, b) i.  Directional derivative of T at coordinate (2, 3, 94) in the direction of vector a is 414.14. ii. It is not possible to have a directional derivative of -55 at coordinate (2, 3, 94).

a) The given vector flow equation of fluid material moving in 3-dimensional space is as follows:

93 =10(sin(x))i + zyj + yzk

The divergence of the vector flow at point (0.5, -10, 94) can be determined by calculating the dot product of the vector flow with the del operator i.e

∇.93

= ( ∂/∂x*i + ∂/∂y*j + ∂/∂z*k ) . ( 10(sin(x))i + zyj + yzk )  

= 10(cos(x)) + z + 1

Since the dot product of the vector flow at point (0.5, -10, 94) is finite and non-zero, the vector flow does not converge at this point.

b) The temperature (T) of the object is given by T(x, y, z) = 93xy ln(z) i.

The rate of change of temperature (directional derivative) in the direction of vector

a = i +2j+ 3k at coordinate (2, 3, 94) can be calculated as follows:

∇T = ( ∂/∂x*i + ∂/∂y*j + ∂/∂z*k ) .

( 93xy ln(z) i ) = ( 93y ln(z) i + 93x ln(z) j + 93xy/z k )

The directional derivative of T at coordinate (2, 3, 94) in the direction of vector a can be calculated as follows:

D_aT = ∇T . a

= ( 93*3*ln(94) ) + ( 93*2*ln(94) ) + ( 93*2*3/94 )

= 414.14

Hence, the directional derivative of T at coordinate (2, 3, 94) in the direction of vector a is 414.14.

ii) The maximum and minimum values of directional derivative at coordinate (2, 3, 94) can be determined by calculating the dot product of ∇T with the unit vectors in all possible directions. Since the magnitude of a unit vector is 1, the dot product gives the value of directional derivative.

Therefore, the lowest possible value of the directional derivative is given by the negative of the maximum value of directional derivative.

Hence, D_maxT

= |∇T|

= sqrt( (93yln(z))^2 + (93xln(z))^2 + (93xy/z)^2 )|_(2,3,94)

= 581.43

Therefore, the lowest possible value of the directional derivative is -581.43.

Since -55 is greater than the lowest possible value of directional derivative, it is not possible to have a directional derivative of -55 at coordinate (2, 3, 94).

Learn about Directional derivative here:

https://brainly.com/question/30048535

#SPJ11

T is between points P and B. PB=35 and TB=12. What is PT? 12 23 17 57

Answers

T is between points P and B. PB=35 and TB=12.. PT is equal to 23.

Certainly! Here's a step-by-step explanation of how we arrived at PT = 23:

We are given that PB is the length of line segment PB, which is 35 units.

Similarly, TB is the length of line segment TB, which is 12 units.

To find the length of PT, we subtract the length of TB from the length of PB. This is because PT represents the remaining length after removing TB from PB.

Using the formula PT = PB - TB, we substitute the given values: PT = 35 - 12.

Subtracting 12 from 35 gives us PT = 23.

Therefore, the length of PT is 23 units.

In summary, we subtracted the length of TB from the length of PB to find the remaining length, which represents PT. The calculation yielded PT = 23.

Learn more about  points from

https://brainly.com/question/26865

#SPJ11

\( \equiv \) Homework: \( 1.1 \) Questlon 30, 1.1.95 HW Score: \( 76.475,20 \) of 34 points

Answers

The tip of the minute hand moves approximately 6.28 inches when it moves from 12 to 10 o'clock.

The problem states that the minute hand of a clock is 6 inches long.

The minute hand moves from 12 to 10 o'clock.

We need to determine how far the tip of the minute hand moves.

Calculate the angle through which the minute hand moves. At 12 o'clock, the minute hand points directly upwards (0 degrees), and at 10 o'clock, it points slightly to the left.

The angle between the 12 and 10 o'clock positions can be calculated as follows:

The hour hand moves 30 degrees in one hour (360 degrees divided by 12 hours).

In two hours, it moves 60 degrees (30 degrees multiplied by 2).

Since the minute hand is 6 inches long, the distance it travels is equal to the circumference of a circle with a radius of 6 inches and an angle of 60 degrees.

Calculate the distance using the formula: Distance = (2πr * θ) / 360, where r is the radius and θ is the angle in degrees.

Substitute the values: Distance = (2 * π * 6 * 60) / 360.

Simplify: Distance = 2π inches.

The final answer is 2π inches, which is approximately 6.28 inches rounded to two decimal places.

To learn more about circumference of a circle click here:

brainly.com/question/17130827

#SPJ11

INCOMPLETE QUESTION

The minute hand of a clock is 6 inches long and moves from 12 to 10 o'clock. How far does the tip of the minute hand move? Express your answer in terms of x and then round to two decimal places.

For each of the following research questions, list all the variables that are needed to answer the question, as well as the measuring scales of the variables. (a) Are unmarried adults more likely to own sports cars than married adults? (b) Do rural households spend more money on transport per year than urban households? (c) Is there a correlation between being diagnosed with diabetes and being diagnosed with high blood pressure? [15] QUESTION 2 Identify the unit of analysis (that is, what kind of entity is being researched) and the population (that is, what particular group of entities forms the entire population) for each of the following research projects. (a) A survey to find out which percentage of households in Johannesburg collects rainwater. (b) An investigation into whether more accidents happen in Johannesburg on rainy days than on days without rain. (c) A research project which aims to find out if girls are more likely to drop out of high school than boys. (d) An investigation into the average length of action movies. [20] QUESTION 4 (a) Explain what is meant by an index variable and give an example of an index variable (other than those given in the study guide). (b) Give one reason why a researcher may wish to ask for the age group of a respondent rather than for their age in full years. (c) Give an example of a research question where it is important to measure age as a ratio variable rather than as an ordinal variable. Justify your answer! [20] 5 STA1507/102/0 QUESTION 3 Classify each of the following data collection methods as direct observation, experiment, or survey. Justify your answers! (a) A researcher collects data from working mothers of small children to find out how their childcare arrangements vary based on where the mothers live. Data is collected with a questionnaire with questions about the type of childcare arrangement and the type of settlement the mothers live in. (b) A researcher asks participants for their height and weight, in order to find out whether there is a relationship between the two. (c) An astronomist measures the brightness of a star at 1-week intervals to find out whether it is a variable star. [15] QUESTION 4 Which of the following statements are true and which are false? Justify your answers! (a) A quantitative research project cannot involve collecting qualitative data. (b) Primary data is always better than secondary data. (c) The Likert scale is an example of ordinal measurement scale. (d) When coding a questionnaire question where the responded is asked to tick all choices that apply to him/her, each such choice needs to be coded as a separate variable

Answers

(a) Variables: Marital status (categorical - nominal scale), Ownership of sports car (categorical - nominal scale)

Measuring scales: Nominal

(b)Variables: Household type (categorical - nominal scale), Expenditure on transport (continuous - ratio scale), Residential area (categorical - nominal scale)

Measuring scales: Nominal (household type, residential area), Ratio (expenditure on transport)

(c)Variables: Diagnosis of diabetes (categorical - nominal scale), Diagnosis of high blood pressure (categorical - nominal scale)

Measuring scales: Nominal

2. (a) Unit of analysis: Households

Population: Households in Johannesburg

(b) Unit of analysis: Accidents

Population: Accidents in Johannesburg

(c) Unit of analysis: Students

Population: High school students

(d) Unit of analysis: Action movies

Population: All action movies

4. (a) An index variable is a composite variable that combines multiple individual variables to provide a summary measure. For example, the Human Development Index (HDI) combines indicators such as life expectancy, education, and income to measure the overall development of a country.

(b) Asking for the age group of a respondent rather than their age in full years can be useful for categorizing and analyzing data more easily. It allows for grouping individuals into meaningful age ranges without losing too much information.

(c) Research question: What is the relationship between age and income? In this case, age needs to be measured as a ratio variable to capture the precise numerical relationship between age and income. Age as an ordinal variable (e.g., age groups) would not provide the necessary granularity to examine the correlation between age and income.

3. (a) Data collection method: Survey

(b) Data collection method: Survey

(c) Data collection method: Direct observation

4. (a) False. A quantitative research project can involve collecting qualitative data alongside quantitative data, depending on the research objectives and design.

(b) False. The suitability of primary or secondary data depends on the research question, data quality, availability, and other factors. Neither is inherently better than the other.

(c) True. The Likert scale is an example of an ordinal measurement scale where the response options have an inherent order but do not have a consistent unit of measurement.

(d) True. When coding a questionnaire question where respondents are asked to tick all choices that apply to them, each choice is typically coded as a separate variable to capture individual responses accurately.

(a) Variables: Marital status (categorical - nominal scale), Ownership of sports car (categorical - nominal scale)

Measuring scales: Nominal

(b) Variables: Household type (categorical - nominal scale), Expenditure on transport (continuous - ratio scale), Residential area (categorical - nominal scale)

Measuring scales: Nominal (household type, residential area), Ratio (expenditure on transport)

(c) Variables: Diagnosis of diabetes (categorical - nominal scale), Diagnosis of high blood pressure (categorical - nominal scale)

Measuring scales: Nominal

2.

(a) Unit of analysis: Households

Population: Households in Johannesburg

(b) Unit of analysis: Accidents

Population: Accidents in Johannesburg

(c) Unit of analysis: Students

Population: High school students

(d) Unit of analysis: Action movies

Population: All action movies

3.

(a) Data collection method: Survey

Justification: The researcher collects data through a questionnaire, which is a common method for conducting surveys.

(b) Data collection method: Survey

Justification: The researcher directly asks participants for their height and weight, which is a typical survey approach.

(c) Data collection method: Direct observation

Justification: The astronomer measures the brightness of a star at regular intervals, which involves direct observation rather than a survey or an experiment.

4.

(a) False. A quantitative research project can involve collecting qualitative data alongside quantitative data, depending on the research objectives and design.

(b) False. The suitability of primary or secondary data depends on the research question, data quality, availability, and other factors. Neither is inherently better than the other.

(c) True. The Likert scale is an example of an ordinal measurement scale where the response options have an inherent order but do not have a consistent unit of measurement.

(d) True. When coding a questionnaire question where respondents are asked to tick all choices that apply to them, each choice is typically coded as a separate variable to capture individual responses accurately.

Learn more about Variables

brainly.com/question/15078630

#SPJ11

Find the set C ∩ ∅.
U={b, c, d, e, f, g, h, i, j}
A={c, e, g}
B={b, i, j}
C={c, e, h, i, j}
A. C ∩ ∅= ​(Use a comma to separate answers as​ needed.)
B. C ∩ ∅ is the empty set.

Answers

The answer is (B) C ∩ ∅ is the empty set, which contains no elements.

Given the following sets:

U = {b, c, d, e, f, g, h, i, j}

A = {c, e, g}

B = {b, i, j}

C = {c, e, h, i, j}

We need to find C ∩ ∅, where ∅ represents the empty set. The empty set, denoted as ∅ or {}, is a set that contains no elements. It is a unique set and is a subset of every set.

The intersection of any set with the empty set is always the empty set. Therefore:

C ∩ ∅ = ∅ or C ∩ ∅ = {}

In other words, the intersection of set C with the empty set is an empty set.

Learn more about empty set

https://brainly.com/question/13553546

#SPJ11

The answer is (B) C ∩ ∅ is the empty set, which contains no elements.

Given the following sets:

U = {b, c, d, e, f, g, h, i, j}

A = {c, e, g}

B = {b, i, j}

C = {c, e, h, i, j}

We need to find C ∩ ∅, where ∅ represents the empty set. The empty set, denoted as ∅ or {}, is a set that contains no elements. It is a unique set and is a subset of every set.

The intersection of any set with the empty set is always the empty set. Therefore:

C ∩ ∅ = ∅ or C ∩ ∅ = {}

In other words, the intersection of set C with the empty set is an empty set.

Learn more about empty set

https://brainly.com/question/13553546

#SPJ11

(a) Solve the IVP x ′′
(t)+2x(t)=0 with x(0)=3 and x ′
(0)=− 2

. (b) Describe the long-term behavior of the above particular solution x(t), i.e., lim t→[infinity]

x(t)= ?

Answers

a) The given differential equation is x''(t) + 2x(t) = 0.

To solve this differential equation, we assume a trial solution of the form x(t) = e^(rt).

Substituting this trial solution, we have x'(t) = re^(rt) and x''(t) = r^2e^(rt).

Plugging these values into the differential equation, we get r^2e^(rt) + 2e^(rt) = 0.

Simplifying, we have r^2 + 2 = 0.

Solving for r, we find r = ±√2i.

The general solution of the given differential equation is x(t) = c1cos(√2t) + c2sin(√2t), where c1 and c2 are constants.

To determine the values of c1 and c2, we need to use the initial conditions.

Given x(0) = 3 and x'(0) = -2, we substitute these values into the general solution.

This yields c1 = 3 and c2 = -2/√2.

Therefore, the particular solution of the given differential equation is x(t) = 3cos(√2t) - (2/√2)sin(√2t).

b) The given differential equation is x''(t) + 2x(t) = 0.

The general solution of this differential equation is x(t) = c1cos(√2t) + c2sin(√2t).

To determine the long-term behaviour of this particular solution, we take the limit as t approaches infinity, which gives:

lim_(t→∞) x(t) = 0.

Hence, the long-term behaviour of the given particular solution x(t) is 0.

Know more about differential equation:

brainly.com/question/32559011

#SPJ11

Skylar is working two summer jobs, making $12 per hour babysitting and making $22
Der hour tutoring. In a given week, she can work a maximum of 10 total hours and
must earn at least $140. If Skylar worked 3 hours babysitting, determine the
minimum number of whole hours tutoring that she must work to meet her
requirements. If there are no possible solutions, submit an empty answer.

Answers

Answer:

When we're not sure of something we can always put x in our equation because we don't know what it is, so lets assume that Skylar works x hours tutoring.

The amount earned from babysitting = $12 per hour × 3 hours = $36.

The amount earned from tutoring = $22 per hour × x hours = $22x.

The total amount earned must be at least $140, so the equation is:

$36 + $22x ≥ $140

$22x ≥ $140 - $36

$22x ≥ $104

x ≥ $104 / $22

x ≥ 4.727

We can round it off to 5, so Skylar must work a minimum of 5 hours for tutoring.

Using geometry, calculate the volume of the solid under x= 4−x 2
−y 2

and over the circular disk x 2
+y 2
≤4

Answers

The solid is bounded above by the paraboloid `z = 4 - x^2 - y^2` and below by the circular disk `x^2 + y^2 ≤ 4`.

The volume of the solid can be calculated using a double integral over the circular disk. In polar coordinates, the circular disk is given by `0 ≤ r ≤ 2` and `0 ≤ θ ≤ 2π`.

The volume of the solid is given by the double integral `V = ∬(4 - x^2 - y^2) dA`. In polar coordinates, this becomes `V = ∬(4 - r^2) r dr dθ`. Evaluating this integral gives `V = ∫[0, 2π] ∫[0, 2] (4r - r^3) dr dθ = ∫[0, 2π] (8 - 4) dθ = 8π`. Therefore, the volume of the solid is `8π` cubic units.

learn more about solid

https://brainly.com/question/28620902

#SPJ11

Evaluate the improper integral or state that it is divergent. ∫ −4
−4

2
1

dx 16
3

304
3

− 32
3

Divergent Question 2 (Mandatory) (1 point) Evaluate the improper integral or state that it is divergent. ∫ −[infinity]


x 7
e −x 8
dx 0 8
1

− 4
1

Divergent

Answers

1. The correct option is 4.

[tex]\int\limits^4_{-\infty} {\frac{3}{x^3} } \, dx = -3/32[/tex]

2. The correct option is 1.

[tex]\int\limits^\infty_-\infty {x^7e^x^{-8}} \, dx = 0[/tex]

Given:

1. Evaluate the improper integral or state that it is divergent.

[tex]\int\limits^4_{-\infty} {\frac{3}{x^3} } \, dx= 3{\frac{x^{-3+1}}{-3+1} }=-\frac{3}{2x^2}[/tex]

2. Evaluate the improper integral or state that it is divergent.

[tex]\lim_{n \to \infty} -\frac{3}{2x^2} = -\frac{3}{2\times16}= \frac{-3}{32}[/tex]

[tex]\int\limits^\infty_-\infty {x^7e^x^{-8}} \, dx[/tex]

Let [tex]z = x^8[/tex]

[tex]\int\limits^\infty_{-\infty} {\frac{e^{-z}}{8} } \, dx = \frac{e^{-z}}{8} =\frac{e^{-x}^{8}}{8}[/tex]

[tex]\int\limits^\infty_x\{\frac{e^{-x^8}{8} } \, dx = 0-0=0[/tex]

Learn more about divergent here:

https://brainly.com/question/31400365

#SPJ4

1. Suppose \( \triangle A B C \) is isosceles with \( \angle B=\angle C \). Let \( A^{\prime} \) be the midpoint of \( B C \). Prove that \( A A^{\prime} \) bisects the angle at \( A \) and that it is perpendicular to BC (so is the altitude at A ).

Answers

In triangle ABC, where angle B is equal to angle C, we need to prove that the line segment AA' bisects the angle at A and is perpendicular to BC, making it the altitude at A.

To prove that AA' bisects the angle at A, we need to show that the angles formed between AA' and the adjacent sides of the triangle are equal. Let's consider triangle ABC, where angle B is equal to angle C.

Bisecting the angle at A:

Since A' is the midpoint of BC, we know that AA' is a median of triangle ABC. A median divides the opposite side into two equal segments. Therefore, A' divides BC into two equal parts, A'B and A'C. This means that angles BAA' and CAA' are congruent because they are opposite angles formed by equal sides.

Perpendicularity to BC:

To show that AA' is perpendicular to BC, we can use the concept of congruent triangles. By applying the Side-Angle-Side (SAS) congruence criterion, we can prove that triangle ABA' is congruent to triangle ACA'.

This is because AA' is a median, and the sides AB and AC are congruent (isosceles triangle). Therefore, angles BAA' and CAA' are congruent angles in congruent triangles, and since the sum of angles in a triangle is 180 degrees, angles BAA' and CAA' must each be 90 degrees.

Hence, we have shown that AA' bisects the angle at A and is perpendicular to BC, making it the altitude at A.

Visit here to learn more about line segment:

brainly.com/question/280216

#SPJ11

A graduate student believed that, on the average, college students spend more time on the Internet compared to the rest of the population. She conducted a study to determine if her hypothesis was correct. The student randomly surveyed 100 students and found that the average amount of time spent on the Internet was 12 hours per week with a SD =2.6 hours. The last census found that, on the average, people spent 11 hour per week on the Internet. a. What does the null hypothesis predict for the problem described above? (Be sure to use the variables given in the description.) b. Conduct a statistical test of the null hypothesis using p=.05. Be sure to properly state your statistical conclusion. c. Provide an interpretation of your statistical conclusion to part B. d. What type of statistical error might you have made in part C? e. Obtain the 95% confidence interval for the sample statistic. f. Provide an interpretation for the interval obtained in part E.

Answers

The graduate student hypothesized that college students spend more time on the Internet on average compared to the general population. She conducted a study and collected data from 100 randomly surveyed students. The average time spent on the Internet for the sample was 12 hours per week, with a standard deviation of 2.6 hours. The last census reported that the average time spent on the Internet by the population was 11 hours per week.

The null hypothesis predicts that there is no significant difference between the average time college students spend on the Internet and the average time spent by the general population. In other words, the average time spent by college students is expected to be the same as the average time reported in the census (μ = 11 hours per week).

To test the null hypothesis, a t-test can be used to compare the sample mean (12 hours) with the population mean (11 hours). Using a significance level of p = 0.05, if the p-value is less than 0.05, the null hypothesis would be rejected.

After conducting the statistical test, if the p-value is less than 0.05, it can be concluded that there is a significant difference between the average time college students spend on the Internet and the average time spent by the general population. If the p-value is greater than 0.05, there is not enough evidence to reject the null hypothesis.

The statistical error that might have occurred in part c is a Type I error, also known as a false positive. This means that the conclusion might suggest a significant difference between the two groups when, in fact, there is no real difference.

To obtain the 95% confidence interval for the sample mean, we can use the formula: sample mean ± (critical value * standard error). The critical value can be obtained from the t-distribution table. The standard error is calculated by dividing the sample standard deviation by the square root of the sample size.

The 95% confidence interval obtained from part e would provide a range of values within which we can be 95% confident that the true population mean falls. For example, if the interval is (11.5, 12.5), it means we can be 95% confident that the average time spent on the Internet by college students is between 11.5 and 12.5 hours per week.

Learn more about 95% Confidence::

https://brainly.com/question/30265803

#SPJ11

1. If 2000 flux lines enter through a given volume of space and
5000 lines diverge from it, calculate the total charge within the
volume. (Express your answer in nano Coulomb up to 2 decimals.)

Answers

Charge cannot be negative as it is a scalar quantity,

Given,

The number of flux lines entering a given volume of space = 2000

The number of flux lines diverging from the same volume of space = 5000

Formula to find the charge within the volume is:Q = Φ1 - Φ2 / 150

Where,

1 = the number of flux lines entering the volume2 = the number of flux lines leaving the volumeWe know that,Q = 1 - 2 / 150⇒ Q = 2000 - 5000 / 150⇒ Q = - 20 / 3

Charge cannot be negative as it is a scalar quantity,

Therefore the total charge within the volume is zero.

Hence, the correct option is B, 0.00.

learn more about Charge on :

https://brainly.com/question/14306160

#SPJ11

2-4 In any year, the weather can inflict storm damage to a home. Form year to year, the damage is random. Let Y denote the dollar value of damage in any given year. Suppose that in 95% of the years Y=0 but in 5% of the year Y=$20,000. a) What are the mean and the standard deviation of the damage in any year?

Answers

The mean damage in any year is $1,000, and the standard deviation is approximately $4,358.90, based on a 95% probability of no damage and a 5% probability of $20,000 damage.

To find the mean and standard deviation of the damage in any given year, we can use the information provided.Let's denote Y as the random variable representing the dollar value of damage. In 95% of the years, Y is equal to zero (Y = 0) and in 5% of the years, Y is equal to $20,000 (Y = $20,000).

The mean (expected value) can be calculated as follows:

Mean (μ) = (Probability of Y = 0) * (Value of Y = 0) + (Probability of Y = $20,000) * (Value of Y = $20,000)

        = (0.95 * 0) + (0.05 * $20,000)

        = $1,000

The standard deviation (σ) can be calculated using the formula:

Standard Deviation (σ) = √[ (Probability of Y = 0) * (Value of Y = 0 - Mean)^2 + (Probability of Y = $20,000) * (Value of Y = $20,000 - Mean)^2 ]

                     = √[ (0.95 * (0 - $1,000)^2) + (0.05 * ($20,000 - $1,000)^2) ]

                     = √[ 0.95 * $1,000,000 + 0.05 * $361,000,000 ]

                     ≈ √[ $955,000 + $18,050,000 ]

                     ≈ √[ $19,005,000 ]

                     ≈ $4,358.90

Therefore, the mean damage in any year is $1,000, and the standard deviation is approximately $4,358.90.

To learn more about standard deviation click here

brainly.com/question/13498201

#SPJ11

Exercise 6 If X is a continuous random variable with a probability density function f(x) = c sinx: 0 < x < π.
(a) Evaluate: P(π< X < 3π/4) and (b) P(X² ≤π^2/16). Evaluate: the expectation ux = E(X).

Answers

(a) P(π < X < 3π/4) = 1 - P(0 < X < π) - P(3π/4 < X < π)

                   = 1 - ∫(0 to π) c sin(x) dx - ∫(3π/4 to π) c sin(x) dx

(b) P(X² ≤ π²/16) = P(-π/4 ≤ X ≤ π/4) = ∫(-π/4 to π/4) c sin(x) dx

To evaluate these probabilities and the expectation E(X), we need to determine the value of the constant c. To find c, we apply the condition that the integral of the probability density function over its entire range must equal 1:

∫(0 to π) c sin(x) dx = 1

Integrating c sin(x) with respect to x gives -c cos(x) + C, where C is the constant of integration. Evaluating the integral from 0 to π, we have:

[-c cos(x)](0 to π) + C(π - 0) = -c(cos(π) - cos(0)) + Cπ = -c(-1 - 1) + Cπ = 2c + Cπ

Setting this expression equal to 1, we can solve for c:

2c + Cπ = 1

Since c is the coefficient in front of sin(x) and C is the constant of integration, we cannot determine their exact values without additional information. However, we can proceed with evaluating the probabilities and expectation once we have the value of c.

In order to evaluate the probabilities and expectation, we need to determine the value of the constant c. This requires applying the condition that the integral of the probability density function over its entire range should be equal to 1. By solving the resulting equation, we can find the value of c.

Once we have determined the value of c, we can calculate the probabilities by integrating the probability density function over the given intervals. For example, to find P(π < X < 3π/4), we subtract the cumulative probability from 0 to π and the cumulative probability from 3π/4 to π from 1.

Similarly, to find P(X² ≤ π²/16), we integrate the probability density function over the interval from -π/4 to π/4.

To evaluate the expectation E(X), we calculate the integral of x times the probability density function over its entire range. This will involve integrating c sin(x) multiplied by x with respect to x. However, since we don't have the exact value of c, we cannot determine the expectation without additional information.

Overall, determining the probabilities and expectation requires finding the value of c and then applying the appropriate integration techniques for the given intervals.

To know more about integration, refer here:

https://brainly.com/question/31744185

#SPJ11

An engineer reported a confidence interval for the gain in a circuit on a semiconducting device to be (974.83, 981.17). Given that the sample size was n= 39 and that the standard deviation was σ= 6.6, find the confidence level used by the engineer.
Round your percentage to the nearest tenth of a percent. (Example: If the answer is 97.14% then enter your answer as 97.1.)

Answers

The confidence interval for the gain in the circuit on the semiconducting device is (974.83, 981.17). The engineer used a confidence level of approximately 97.4%.

To determine the confidence level used by the engineer, we need to consider the formula for a confidence interval. The formula is:

Confidence interval = point estimate ± margin of error

In this case, the point estimate is the mean gain in the circuit (which is not provided), and the margin of error is half the width of the confidence interval. The width of the confidence interval is calculated by subtracting the lower bound from the upper bound.

Width of interval = upper bound - lower bound

The margin of error is half of the width of the interval. Therefore, the margin of error is:

Margin of error = (upper bound - lower bound) / 2

Once we have the margin of error, we can calculate the confidence level. The confidence level is 1 minus the significance level (alpha), which is equal to the probability of the interval capturing the true population parameter. In this case, the confidence level is approximately 97.4%

Therefore, the engineer used a confidence level of approximately 97.4% for the reported confidence interval.

Learn more about confidence interval here:

https://brainly.com/question/32546207

#SPJ11

Let A=(2−1​12​0p​),B=(11​−22​2−1​) and C=ATB+2I3​ be three matrices, where p is a real number, AT denotes the transpose of A, and I3​ is the 3×3 identity matrix. Determine the value(s) of p for which the matrix C is invertible.

Answers

With the three matrices given which are 3x3 identity matrix, the value(s) of p for which the matrix C is invertible are p = 1/2, p = 4 + √6, and p = 4 - √6.

Determination of values of p

Computing the matrix product ATB

Thus,

ATB = [tex][(2 - 1/p), 1/2, 1, 0] [(1, -2), (2, -1)]\\= [(2 - 1/p)(1) + (1/2)(2), (2 - 1/p)(-2) + (1/2)(-1)]\\[(2 - 1/p)(2) + (1)(1), (2 - 1/p)(-1) + (1)(-2)]\\= [(4 - 1/p), (-4p + 1)/2]\\[(5 - 2/p), (-2 + 2/p)][/tex]

Then, add 2I3, we have;

C = [tex]ATB + 2I3 = [(4 - 1/p + 2), (-4p + 1)/2, 2]\\[(5 - 2/p), (-2 + 2/p + 2), 2]\\= [(6 - 1/p), (-4p + 5)/2, 2]\\[(5 - 2/p), (2/p), 2][/tex]

To determine the values of p for which C is invertible, use the determinant of C.

If det(C) is nonzero, then C is invertible.

det(C) = [tex][(6 - 1/p)(2/p) - (-4p + 5)/2(5 - 2/p)]\\[(5 - 2/p)(2) - (2/p)(-4p + 5)/2]\\= [(12 - 2/p^2 + 8p - 10)/2p] - [(10 - 4 + 4p - 5/p)/2]\\= [(2p^3 - 6p^2 + 5p + 5)/p] - [(5 - 4p + 5/p)/2]\\= [(4p^4 - 12p^3 + 10p^2 + 10p)/2p] - [(10p - 8p^2 + 10)/2p]\\= -(2p^3 - 9p^2 + 5p - 5)/2p[/tex]

To find the values of p for which det(C) = 0, we need to solve the equation:

[tex]2p^3 - 9p^2 + 5p - 5 = 0[/tex]

Use synthetic division  to factor this polynomial but notice that p = 1 is a root by inspection:

[tex]2(1)^3 - 9(1)^2 + 5(1) - 5 = 0[/tex]

Therefore, we can factor the polynomial as:

[tex](2p - 1)(p^2 - 8p + 5) = 0[/tex]

The roots of this equation are p = 1/2 and p = 4 ± √6.

Hence, matrix C is invertible for p = 1/2, p = 4 + √6, and p = 4 - √6.

Learn more about matrix on https://brainly.com/question/94574

#SPJ4

A tailor has the following materials available: 16 square yards of cotton, 11 square yards of silk, and 15 square yards of wool. A suit requires 2 square yards of cotton, 1 square yard of silk, and 1 square yard of wool. A gown requires 1 square yard of cotton, 2 square yards of silk, and 3 square yards of wool. Suppose the profit P is $30 on a suit and $50 on a gown.
Find the maximum profit in $.
Find the Number of suits sold to gain max. profit.
Find the number of gowns sold to gain max. profit.

Answers

We find that the maximum profit is $490 when 5 gowns are sold and 8 suits are sold.

To find the maximum profit, we can use a brute-force approach or a linear programming technique. Let's use the brute-force approach, considering all possible combinations of suits and gowns within the available materials.

We can start by calculating the maximum number of suits that can be made with the available cotton, silk, and wool:

Cotton allows for a maximum of 16/2 = 8 suits.

Silk allows for a maximum of 11/1 = 11 suits.

Wool allows for a maximum of 15/1 = 15 suits.

Next, we calculate the maximum number of gowns:

Cotton allows for a maximum of 16/1 = 16 gowns.

Silk allows for a maximum of 11/2 = 5 gowns.

Wool allows for a maximum of 15/3 = 5 gowns.

Now, we can calculate the profit for each combination of suits and gowns:

If we sell 8 suits, the profit will be 8 * $30 = $240.

If we sell 5 gowns, the profit will be 5 * $50 = $250.

Total profit: $240 + $250 = $490.

If we sell 8 suits, the profit will be 8 * $30 = $240.

If we sell 4 gowns, the profit will be 4 * $50 = $200.

Total profit: $240 + $200 = $440.

By calculating the profit for all possible combinations, we find that the maximum profit is $490 when 5 gowns are sold and 8 suits are sold.

For more information on maximum profit visit: brainly.com/question/29581113

#SPJ11

Required information An insurance company offers a discount to homeowners who install smoke detectors in their homes. A company representative claims that 83% or more of policyholders have smoke detectors. You draw a random sample of eight policyholders. Let X be the number of policyholders in the sample who have smoke detectors. If exactly 83% of the policyholders have smoke detectors, what is P(X ≤ 6)? P(X ≤ 6) is

Answers

P(X ≤ 6) is the probability that in a sample of eight policyholders, six or fewer have smoke detectors.

To find P(X ≤ 6), the probability that in a sample of eight policyholders, six or fewer have smoke detectors, we can use the binomial distribution.

Given that exactly 83% of the policyholders have smoke detectors, we know that the probability of a policyholder having a smoke detector is 0.83, and the probability of not having a smoke detector is 1 - 0.83 = 0.17.

Using the binomial probability formula, we can calculate the probability of each outcome from X = 0 to X = 6 and sum them up:

P(X ≤ 6) = P(X = 0) + P(X = 1) + P(X = 2) + P(X = 3) + P(X = 4) + P(X = 5) + P(X = 6).

By plugging in the appropriate values into the binomial probability formula and performing the calculations, we can determine the value of P(X ≤ 6).

To learn more about “probability” refer to the https://brainly.com/question/13604758

#SPJ11

Matrices A,B,C and X are such that (AX −1
B −1
) −1
=C An expression for X is Select one: A. B −1
CA в. A −1
B −1
C Matrix A is of size 5×7 and Rank(A)=4 What is dim[Null(A)] ? Select one: A. 3 B. 1 C. 2 D. 5 E. 4

Answers

dim[Null(A)] = 7 - 4 = 3. Hence, the correct answer is option A. 3, which represents the dimension of the null space of matrix A.

The given expression is (AX^(-1)B^(-1))^(-1) = C. We need to determine the expression for matrix X.

To simplify the given expression, we can start by taking the inverse of both sides:

(AX^(-1)B^(-1)) = C^(-1)

Next, we can rearrange the equation by multiplying both sides by the inverse of B and A:

AX^(-1) = C^(-1)B

Now, to solve for X, we can multiply both sides by the inverse of A:

X^(-1) = A^(-1)C^(-1)B

Finally, taking the inverse of both sides, we get the expression for X:

X = (A^(-1)C^(-1)B)^(-1)

Therefore, the correct answer is option B. A^(-1)B^(-1)C. This expression represents the matrix X in terms of the given matrices A, B, and C.

For the second question, we are given that matrix A is of size 5x7 and Rank(A) = 4. The dimension of Null(A), also known as the nullity of A, can be calculated using the rank-nullity theorem.

According to the rank-nullity theorem, the dimension of the null space of a matrix is equal to the difference between the number of columns and the rank of the matrix. In this case, dim[Null(A)] = number of columns - Rank(A).

Therefore, dim[Null(A)] = 7 - 4 = 3.

Hence, the correct answer is option A. 3, which represents the dimension of the null space of matrix A.

Learn more about matrix here: https://brainly.com/question/29132693

#SPJ11

A random sample of 84 eighth grade students' scores on a national mathematics assessment test has a mean score of 268 . This test result prompts a state school administrator to declare that the mean score for the state's eighth graders on this exam is more than 260. Assume that the population standard deviation is 34. At α=0.14, is there enough evidence to support the administrator's claim? Complete parts (a) through (e). (a) Write the claim mathematically and identify H 0

and H a

. Choose the correct answer below. A. H 0

:μ=260 (claim) B. H 0

:μ≤260 (claim) C. H 0

=μ≤260 H a

:μ>260 H a

:μ>260 H a

⋅μ>260( claim ) D. H 0

:μ=260 E. H 0

:μ<260 F. H 0

:μ≥260 (claim) H a

:μ>260( claim) H a

μ≥260 (claim) H a

−μ<260 (b) Find the standardized test statistic z, and its corresponding area z= (Round to two decimal places as needed) (c) Find the P-value. (c) Find the P-value. P-value = (Round to three decimal places as needed.) (d) Decide whether to reject or fall to reject the null hypothesis. Reject H 0

Fail to reject H 0

(e) Interpret your decision in the context of the original claim. At the 14% significance level, there enough evidence to the administrator's claim that the mean score for the state's eighth graders on the exam is more than 260 .

Answers

a) The correct answer is B. H0: μ ≤ 260 (claim).

b) z= 1.25

c) The area to the right of 1.25 is approximately 0.106.

d) we fail to reject the null hypothesis.

e) There is not enough evidence to support the administrator's claim that the mean score for the state's eighth graders on the exam is more than 260

(a) The correct answer is:

H₀: μ ≤ 260 (claim)

Hₐ: μ > 260

(b) To find the standardized test statistic z, we can use the formula:

z = (x - μ) / (σ / √n)

where x is the sample mean, μ is the population mean, σ is the population standard deviation, and n is the sample size.

In this case, x = 268, μ = 260, σ = 34, and n = 84. Plugging in the values:

z = (268 - 260) / (34 / √84)

z ≈ 2.42 (rounded to two decimal places)

(c) The p-value represents the probability of obtaining a test statistic as extreme as the one observed, assuming the null hypothesis is true. To find the p-value, we need to find the area to the right of the z-score in the standard normal distribution table.

Looking up the z-score of 2.42 in the table, we find the corresponding area to be approximately 0.007 (rounded to three decimal places).

(d) To decide whether to reject or fail to reject the null hypothesis, we compare the p-value to the significance level (α). If the p-value is less than α, we reject the null hypothesis; otherwise, we fail to reject it.

In this case, the significance level is given as α = 0.14, and the p-value is approximately 0.007. Since the p-value is less than α, we reject the null hypothesis.

(e) The decision to reject the null hypothesis means that there is enough evidence to support the administrator's claim that the mean score for the state's eighth graders on the exam is more than 260, at the 14% significance level.

Learn more about null hypothesis here:

https://brainly.com/question/28920252

#SPJ11

Question 18 The drug Lipitor is meant to reduce cholesterol and LDL cholesterol. In clinical trials, 23 out of 863 patients taking 10 mg of Lipitor daily complained of flulike symptoms. Suppose that it is known that 1.9% of patients taking competing drugs complain of flulike symptoms. Is there evidence to conclude that Lipitor users experience flulike symptoms at a higher rate than those taking competing drugs? Calculate the P-value for this hypothesis test using the Binomial distribution. (Round to 3 decimal places.) Question 19 The drug Lipitor is meant to reduce cholesterol and LDL cholesterol. In clinical trials, 23 out of 863 patients taking 10 mg of Lipitor daily complained of flulike symptoms. Suppose that it is known that 1.9% of patients taking competing drugs complain of flulike symptoms. Is there evidence to conclude that Lipitor users experience flulike symptoms at a higher rate than those taking competing drugs? Calculate the P-value for this hypothesis test using the Normal approximation. (Round to 3 decimal places.) D Question 20 Which of the following are true about hypothesis testing? (Select ALL that apply.) They can be used to provide evidence in favor of the null hypothesis. Two researchers can come to different conclusions from the same data. Using a significance level of 0.05 is always reasonable. A statistically significant result means that finding can be generalized to the larger population. None of these.

Answers

The P-value for the hypothesis test using the Binomial distribution is 0.006. The P-value for the hypothesis test using the Normal approximation is also 0.006.

In order to test whether Lipitor users experience flulike symptoms at a higher rate than those taking competing drugs, we can use a hypothesis test. Let's define the null hypothesis (H0) as "the rate of flulike symptoms for Lipitor users is the same as the rate for patients taking competing drugs."

The alternative hypothesis (Ha) would be "the rate of flulike symptoms for Lipitor users is higher than the rate for patients taking competing drugs."

To calculate the P-value using the Binomial distribution, we need to determine the probability of observing 23 or more patients experiencing flulike symptoms out of 863 Lipitor users if the null hypothesis is true. Using the Binomial distribution, we find that the probability is 0.006.

Similarly, to calculate the P-value using the Normal approximation, we can approximate the binomial distribution with a normal distribution. Under the null hypothesis, the mean of the distribution would be 863 multiplied by the rate of flulike symptoms for patients taking competing drugs (0.019).

The standard deviation would be the square root of 863 multiplied by 0.019 multiplied by (1 - 0.019). We can then calculate the z-score for the observed number of patients (23) and find the corresponding probability, which is again 0.006.

Therefore, both the Binomial distribution and the Normal approximation yield the same P-value of 0.006. This P-value is smaller than a significance level of 0.05, which indicates strong evidence to reject the null hypothesis. It suggests that Lipitor users experience flulike symptoms at a higher rate than those taking competing drugs.

Learn more about probability here: https://brainly.com/question/31828911

#SPJ11

Let A and B be closed sets in a topological space X. (a) Prove that if I A,B

=(0,0,0,0), then A∩B=∅. (b) Prove that if I A,B

=(1,0,0,0), then A∩B=∂A∩∂B. (c) Prove that if I A,B

=(1,1,1,1) or (0,1,1,1), then Int(A)∩Int(B)

=∅, A

⊂B, and B

⊂A. An Application to Geographic Information Systems 93 31. This exercise demonstrates that if we drop either of the defining conditions for planar spatial regions A and B, then I A,B

=(1,1,0,0) need not imply A=B. (a) Find an example of regularly closed sets A and B in the plane such that I A,B

=(1,1,0,0) and A

=B. (b) Find an example of closed sets A and B in the plane, each having an interior that is an open ball, such that I A,B

=(1,1,0,0) and A

=B. (In Chapter 6 we prove that an open ball in R 2
is connected, meaning it cannot be expressed as the union of two disjoint nonempty open subsets. Therefore a set with an interior that is an open ball satisfies the second condition to be a planar spatial region.)

Answers

∂A∩∂B⊆A∩B, which implies that A∩B=∂A∩∂B.

a) Proof: Let A and B be closed sets in a topological space X, and suppose that IA,B=(0,0,0,0).

To show that A∩B=∅, suppose that there exists an x∈A∩B.

Then x∈A and x∈B, which implies that IA,B(x)=(1,1,0,0).

However, this contradicts the assumption that IA,B=(0,0,0,0).

Therefore, A∩B=∅.b) Proof:

Suppose that IA,B=(1,0,0,0), and let x∈A∩B. Then x∈A and x∈B, which implies that IA,B(x)=(1,1,0,0).

Since IA,B(x)=(1,0,0,0), this implies that x∈∂A and x∈∂B.

Therefore, A∩B⊆∂A∩∂B. To prove the reverse inclusion, let x∈∂A∩∂B. Then x∈∂A, so every neighborhood of x intersects A and X\A.

Similarly, x∈∂B, so every neighborhood of x intersects B and X\B. It follows that every neighborhood of x intersects both A and B, so x∈A∩B.

Learn more about topological

https://brainly.com/question/31913704

#SPJ11

87. Continuous compound interest. How many years (to two decimal places) will it take an investment of $35,000 to grow to $50,000 if it is invested at 4.75% compounded continuously? 88. Continuous compound interest. How many years (to two decimal places) will it take an investment of $17,000 to grow to $41,000 if it is invested at 2.95% compounded continuously?

Answers

87.It will take approximately 0.25 years for the investment of $35,000 to grow to $50,000 at an interest rate of 4.75% compounded continuously.

88. It will take approximately 2.47 years for the investment of $17,000 to grow to $41,000 at an interest rate of 2.95% compounded continuously.

To calculate the number of years required for an investment to grow to a certain amount with continuous compound interest, we can use the formula:

t = ln(A/P) / (r * 100)

where:

t = number of years

A = final amount

P = principal amount (initial investment)

r = interest rate

Let's calculate the number of years for each case:

87. For an investment of $35,000 to grow to $50,000 at an interest rate of 4.75% compounded continuously:

t = ln(50000/35000) / (4.75 * 100)

t ≈ 0.2503 years (rounded to two decimal places)

Therefore, it will take approximately 0.25 years for the investment to grow to $50,000.

88. For an investment of $17,000 to grow to $41,000 at an interest rate of 2.95% compounded continuously:

t = ln(41000/17000) / (2.95 * 100)

t ≈ 2.4739 years (rounded to two decimal places)

Therefore, it will take approximately 2.47 years for the investment to grow to $41,000.

Learn more about compound interest from the given link:

https://brainly.com/question/14295570

#SPJ11

Hannah has liabilities totaling $30,000 (excluding her mortgage of $100,000 ). Her net worth is $45,000. What is her debt-to-equity ratio? 0.75 0.45 0.67 1.30 1.00

Answers

Hannah's debt-to-equity ratio when her liabilities was $30,000 (excluding her mortgage of $100,000 ) and her net worth is $45,000 is 0.75.

Debt-to-equity ratio is a financial ratio that measures the proportion of total liabilities to shareholders' equity. To calculate the debt-to-equity ratio for Hannah, we need to first calculate her total liabilities and shareholders' equity.

We are given that Hannah has liabilities of $30,000 excluding her mortgage of $100,000. Therefore, her total liabilities are $30,000 + $100,000 = $130,000.

We are also given that her net worth is $45,000. The net worth is calculated by subtracting the total liabilities from the total assets. Therefore, the shareholders' equity is $45,000 + $130,000 = $175,000.

Now we can calculate the debt-to-equity ratio by dividing the total liabilities by the shareholders' equity.

Debt-to-equity ratio = Total liabilities / Shareholders' equity = $130,000 / $175,000 = 0.74 (rounded to two decimal places)

Therefore, Hannah's debt-to-equity ratio is 0.74, which is closest to option 0.75.

Learn more about Debt-to-equity ratio here: https://brainly.com/question/27993089

#SPJ11

There exists a 2 x 6 matrix C satisfying ker(C)= im(projv). Let V be the subspace of R4 spanned by the three vectors 46804 2 V₁ = V2 = 0 -2 0 √3 = 0 0 0 1

Answers

The required C matrix is as follows,C = [ 4/3 0 0 -2√3/3 0 0 ; 0 0 0 0 1 0 ].

Given information:There exists a 2 x 6 matrix C satisfying ker(C)= im(projv).Let V be the subspace of R4 spanned by the three vectors4 6 8 02 V₁ = V₂ = 0-2 0 √3 = 00 0 1It is required to find a 2 x 6 matrix C satisfying ker(C)= im(projv).

Formula used:If A is an m x n matrix then, ker(A) = Nul(A) = {x | Ax = 0 } (nullspace) andim(A) = { Ax | x  Є Rⁿ } (column space)By the rank-nullity theorem, rank(A) + dim(ker(A)) = nAlso, rank(A) = dim(col(A)).

Let us consider the three vectors as column vectors of matrix A of size 4 x 3 as follows,

A = [ 4 0 0 -2 ; 6 0 0 0 ; 8 0 0 √3 ; 0 0 1 0 ].

The rank of matrix A is 3, the column space is a subspace of R4, so the dim(col(A)) = 3, thus the dim(ker(A)) = 4 - 3 = 1.Now, we need to find a matrix C of size 2 x 6 such that ker(C) = im(projv) since dim(ker(C)) = dim(im(projv)), we need to first find the matrix of the projection of R⁴ onto V.

The projection of R⁴ onto V is defined as P = A ( Aᵀ A )⁻¹ AᵀUsing the given A matrix, we getP = [ 4/3 0 0 -2√3/3 ; 0 0 0 0 ; 0 0 0 √3/3 ].

Therefore,im(projv) = { Pv | v  Є R⁴ }ker(C) = { x | Cx = 0 }We need ker(C) = im(projv) therefore the columns of matrix C should be the basis for im(projv).

Thus the required C matrix is,C = [ 4/3 0 0 -2√3/3 0 0 ; 0 0 0 0 1 0 ]The main answer is:C = [ 4/3 0 0 -2√3/3 0 0 ; 0 0 0 0 1 0 ] is a 2 x 6 matrix satisfying ker(C) = im(projv).

The projection of R⁴ onto V is defined as P = A ( Aᵀ A )⁻¹ Aᵀ.Using the given A matrix, we get P = [ 4/3 0 0 -2√3/3 ; 0 0 0 0 ; 0 0 0 √3/3 ]. Therefore,im(projv) = { Pv | v  Є R⁴ }. ker(C) = { x | Cx = 0 }.

Therefore, the columns of matrix C should be the basis for im(projv). Hence, the required C matrix is as follows,C = [ 4/3 0 0 -2√3/3 0 0 ; 0 0 0 0 1 0 ]Conclusion:Therefore, C = [ 4/3 0 0 -2√3/3 0 0 ; 0 0 0 0 1 0 ] is a 2 x 6 matrix satisfying ker(C) = im(projv).

Therefore, C = [ 4/3 0 0 -2√3/3 0 0 ; 0 0 0 0 1 0 ] is a 2 x 6 matrix satisfying ker(C) = im(projv).

To know more about rank of matrix visit:

brainly.com/question/30748258

#SPJ11

For a mass-spring oscillator, Newton's second law implies that the position y(t) of the mass is governed by the second-order differential equation my''(t) + by' (t) + ky(t) = 0. (a) Find the equation of motion for the vibrating spring with damping if m= 10 kg, b = 120 kg/sec, k = 450 kg/sec², y(0) = 0.3 m, and y'(0) = -1.2 m/sec. (b) After how many seconds will the mass in part (a) first cross the equilibrium point? (c) Find the frequency of oscillation for the spring system of part (a). (d) The corresponding undamped system has a frequency of oscillation of approximately 1.068 cycles per second. What effect does the damping have on the frequency of oscillation? What other effects does it have on the solution? (a) y(t) = .3 e - 6t cos 3t+.2 e 6t sin 3t

Answers

Given:

Mass of the vibrating spring with damping, m = 10 kg

Coefficient of viscous damping, b = 120 kg/sec

Spring constant, k = 450 kg/sec²

Initial position of the spring, y(0) = 0.3 m

Initial velocity of the spring, y'(0) = -1.2 m/sec

The equation of motion for the vibrating spring with damping is:

\(my''(t) + by'(t) + ky(t) = 0\)

Substituting the given values, we have:

\(10y''(t) + 120y'(t) + 450y(t) = 0\)

Dividing the equation by 10, we get:

\(y''(t) + 12y'(t) + 45y(t) = 0\)

To solve this differential equation, let's assume a solution of the form:

\(y(t) = e^{rt}\)

Substituting it into the differential equation, we get:

\(r^2 + 12r + 45 = 0\)

Solving the quadratic equation, we find:

\(r_1,2 = -6 \pm 3i\)

Therefore, the general solution of the given differential equation is:

\(y(t) = C_1e^{-6t}\cos(3t) + C_2e^{-6t}\sin(3t)\), where \(C_1\) and \(C_2\) are constants.

Differentiating \(y(t)\) with respect to \(t\), we have:

\(y'(t) = -6C_1e^{-6t}\cos(3t) - 6C_2e^{-6t}\sin(3t) - 3C_1e^{-6t}\sin(3t) + 3C_2e^{-6t}\cos(3t)\)

At \(t = 0\), we have \(y(0) = 0.3\) and \(y'(0) = -1.2\). Substituting these values into the general solution, we find:

\(C_1 = 0.3\) and \(C_2 = -1.8\)

Therefore, the equation of motion for the vibrating spring with damping is:

\(y(t) = 0.3e^{-6t}\cos(3t) - 1.8e^{-6t}\sin(3t)\)

The mass will cross the equilibrium point when \(y(t) = 0\). Substituting \(y(t) = 0\) into the equation of motion, we find:

\(0.3e^{-6t}\cos(3t) - 1.8e^{-6t}\sin(3t) = 0\)

Dividing by \(0.3e^{-6t}\), we get:

\(\cos(3t) - 6\sin(3t) = 0\)

This implies \(\tan(3t) = 1/6\). Solving for \(t\), we find:

\(t = (1/3)\tan^{-1}(1/6) \approx. 0.0409\) seconds

The frequency of oscillation for the spring system in part (a) is given by the absolute value of the imaginary part of the roots of the characteristic equation, which is 3 Hz.

The frequency of oscillation of the undamped system is given by the square root of \(k/m\), which is approximately 3.872 Hz. The damping decreases the frequency of oscillation. Additionally, the damping causes the amplitude of the oscillation to decrease exponentially.

Know more Newton's second law:

brainly.com/question/32884029

#SPJ11

A student solved this question: Find the value(s) of x within 0 <= x <= 2pi for the following expression sin^2 (2x) + 1/4 = 2sin(x) * cos(x)
Did they make any mistakes in their work below? If yes, show where the mistakes are by explaining what they did wrong. Then fix the problem to get the correct answer based on the question[5C]
sin^2 (2x) + 1/4 = 2sin(x) * cos(x)
sin^2 (2x) - 2sin(x) * cos(x) + 1/4 = 0
sin^2 (2x) - sin(2x) + 1/4 = 0
(sin(2x) - 1) ^ 2 = 0 sin(2x) - 1 = 0
sin(2x) = 1
2x = arcsin(1) 2x = pi/2 x = pi/4 x = (3pi)/4
Therefore, when x = pi/4 or x = (3n)/4 the equation is true

Answers

The student made a mistake in their work. By the corrected steps , the correct solution is x = pi/4. Let's go through the steps and identify the error:

Original work:

sin^2 (2x) + 1/4 = 2sin(x) * cos(x)

sin^2 (2x) - 2sin(x) * cos(x) + 1/4 = 0

sin^2 (2x) - sin(2x) + 1/4 = 0

(sin(2x) - 1) ^ 2 = 0

sin(2x) - 1 = 0

sin(2x) = 1

2x = arcsin(1)

x = pi/2

x = (3pi)/2

Mistake: The student incorrectly solved the equation sin(2x) = 1. Instead of taking the arcsine of 1, which gives x = pi/2, the correct approach is to solve for 2x and then divide by 2 to find x.

Corrected steps:

sin(2x) = 1

2x = arcsin(1)

2x = pi/2

x = (pi/2) / 2

x = pi/4

Therefore, the correct solution is x = pi/4.

Now let's summarize the correct steps:

Start with the equation sin^2 (2x) + 1/4 = 2sin(x) * cos(x).

Simplify the equation: sin^2 (2x) - sin(2x) + 1/4 = 0.

Factor the quadratic expression: (sin(2x) - 1) ^ 2 = 0.

Solve for sin(2x) - 1 = 0.

sin(2x) = 1.

Solve for 2x: 2x = arcsin(1).

Simplify: 2x = pi/2.

Divide both sides by 2: x = (pi/2) / 2.

Simplify: x = pi/4.

Therefore, the correct solution is x = pi/4.

To learn more about quadratic expression click here:

brainly.com/question/31368124

#SPJ11

Other Questions
Choose the closest numerical values in the answer options, in case, if you haven't get the exact values due to decimal place corrections The purchase price of a natural gas-fired commercial boiler (capacity X ) was $181,000 eight years ago. Another boiler of the same basic design, except with capacity 1.42X, is currentiy being considered for purchase. If it is purchased, some optional features presently costing 28,000 would be added for your application. If the cost index was 162 for this type of equipment when the capacity X boiler was purchased and is 221 now, and the applicable cost capacity factor is 0.8, what is your estimate of the purchase price for the new boiler? 1. What is the cost estimate of the boiler of capacity x now? a) 326,829 b) 354,849 c) 257,000 (d) 246,920 181,000 162221a) 326,829 b) 354,849 c) 257,000 (d) 246,920 2. What is the cost estimate of the boiler of capacity 1.42x now? 246,920(1.42) (a) 326,879 b) 354,849 c) 257,000 d) 246,920 3. What is the cost estimate of the boiler of capacity 1.42X with optional feature now? a) 326,879 (b) 354,879 c) 257,000 d) 246,920 Alice burns her forearm on the waffle iron, but doesnt feel any pain. In fact, last year she broke her rib and didnt know it. Alice likely hasGroup of answer choicesa. nociceptionb. congenital analgesiac. thermoceptiond. proprioception Quantitative Problem 11 You deposit $1,600 into an account that poys 7%5 per year. Your plan is to withdraw this amount at the end of 5 years to use for a down payment on a new car. How much will you be able to withdraw at the end of 5 years? Do fot round intermediate calculations. Alound your answer to the nearest cent. Quantitative Problem 2: Today, you invest a lump sum amount in an equity fund that provides an 12% annual return. You would 11k e to have 311,000 in 6 yoars to hela with a down payment for a home. How much do you need to deposit today to reach your $11,000 goal? Do not round intermediate calculations. Round your answer to the nesrest cent. b) A program that processes a file of input numbers is run a number of times, each time doubling the size of the input. The running time for each input was recorded, and the data are presented in Table Q3b below. Table Q3bFor the memory and index register shown below,what value is loaded into the accumulator for Load 1600 instruction using the direct addressing mode? Note that the instruction format may not follow MARIE architecture. 0x500 0900 R1 0x800 0900 0x1000 0x1000 0500 0x1100 0x600 0x1600 0x7N2505001000200040008000t(s)21833301320528021120Use the doubling hypothesis to find a power law relationship that approximately describes the program's performance. What technological advances led to the development of multistory buildings?Elevators, telephones and electricitySteel reinforced concreteImproved sanitary systemsAll of the aboveIn 1929, which event caused the banks to hire individuals to manage many buildings?Increased Penalties Act is passedRoaring 20s increase in lendingStock market crashThe Young Plan is issuedWhat caused the S & L failures in the mid-1980s?Commercial banks ability to compete on a nationwide basisInflationExcessive lending, speculation, and risk-taking driven by the moral hazard created by deregulation and taxpayer bailout guaranteesFinancial Institutions Reform, Recovery, and Enforcement ActFollowing the attacks on 9/11/01, real estate managers faced what issues:Increased costs in obtaining adequate insurance that contained provisions relating to terrorism required more intense screening of tenantsDevelopment of comprehensive emergency proceduresExecutive Order required commercial properties to check officers of prospective tenants against list of suspected individualsAll the aboveREITs are required toRetain earnings to invest in additional properties or improvements to existingHave shareholders vote to retain earnings for investmentDistribute 50% of taxable incomeDistribute 95% of taxable incomeSole proprietorships haveLimited liability in real estate ownershipAvoid real estate profit taxesRequire complex filings to set upHave unlimited liability in real estate ownershipIn general partnershipsOnly the lead partner cannot commit the partnership to contractsPersonal liability of each partner is limited to their investmentManaging member can be an investor or outsider selected by membersAny partner can commit other partners to financial liability without the knowledge of the other partner(s)In an LLCThe managing member must be an investorThe members liability exposure is always protectedThe members liability exposure can be increased if they are doing something illegalAny member can commit other members to financial liabilityClass B buildings areNewer buildings that have not been fully leasedHave competitive lease terms to Class A buildingsCompete with large retail mallsCompete for a wide range of users with rents in the average range for the areaAfter passage of the Employment Retirement Income Security Act in 1974Pension funds reduced their real estate investmentsInsurance companies increased their real estate investment to diversify their portfolioEmployees were able to invest in real estate without fear of losing their fundsUS government bonds funded real estate investmentThe Enron failure was the motivation for the passage of theSarbanes-Oxley ActEmployment Retirement Income Security ActUSA Patriot ActNorth American Free Trade AllianceGovernment Assisted Housing isHousing owned and managed through a local governmentHousing owned and managed by a state government agencyHousing owned and managed by HUDWhere the property owner receives part of the rent from the governmentHUD rental assistance for low-income familiesIs only for units previously approved under long-term contractsIs still available for new constructionCan be transferred to new projectsCan be used for new rehabilitated projectsThe Great Recession of 2008, resulted in banksBeing willing to lend at high LTVReducing and eliminating lines of credit which reduced tenants ability to pay rentGetting very low federal funds rate from Federal ReserveBorrowing from S & LsReal estate management is a result ofWorld War II taking women into the workforceDevelopment of a legal system that granted individuals the right to own real propertyIncreased complexity and size of buildings and changing economic conditions that required professional management of them as well as and satisfying the needs of those people who live, work and shop in themA and CB and CA, B and C College tuition: The mean annual tuition and fees for a sample of 24 private colleges in California was $37,000 with a standard deviation of $7800. A dotplot shows that it is reasonable to assume that the population is approximately normal. Can you conclude that the mean tuition and fees for private institutions in California is greater than $35,000 ? Use the =0.10 level of significance and the P-value method with the TI-84 Plus calculator. College tuition: The mean annual tuition and fees for a sample of 24 private colleges in California was $37,000 with a standard deviation of $7800. A dotplot California is greater than $35,000 ? Use the =0.10 level of significance and the P-value method with the TI-84 Plus calculator. College tuition: The mean annual tuition and fees for a sample of 26 private colleges in California was $38,200 with a standard deviation of $7000. A dotplot shows that it is reasonable to assume that the population is approximately normal. Can you conclude that the mean tuition and fees for private institutions in California differs from $35,000 ? Use the =0.10 level of significance and the P-value method with the TI-84 Plus calculator. 2019 different from 0.65 ? Based on these findings, which of the following statements is correct? a. Fail to reject H 0; there is not significant evidence to suggest the proportion of teenagers who wrote a thank you note after receiving a gitt in 2019 is different than 0.65. b. Reject H 0; there is significant evidence to suggest the proportion of teenagers who wrote a thank you note after receiving a gift in 2019 is 0.65. c. Fail to reject H 0; there is significant evidence to suggest the proportion of teenagers who wrote a thank you note after receiving a gift in 2019 is different than 0.65. d. Reject H 0; there is significant evidence to suggest the proportion of teenagers who wrote a thank you note after receiving a gift in 2019 is different than 0.65. Describe four attributes of a data-driven school. compute how much money you need to invest today in order to be able to have retirement income of $42,000 per year for u+2 years if you can earn 6.22% per year and if you plan to retire in 40 years?compute how much money you need to invest today in order to be able to have retirement income of $3500 per month for u+28 months if you can earn 6.22% per year and if you plan toretire in 40 years?u=12 On this assignment. you are to state and explain 2 ratios per industry that you used to identify the respective companies in the industry. You may use one ratio for multiple industries, provided it is applicable to distinguish between the compaies in the industries. - Company I is New York Times and Company J is A. H. Belo. - Goodwill and intangibles: Belo has a 14\% higher intangibles percentage as a result of its strategy to acquire companies in industries outside of the newspaper business. - Stockholders' equity and long-term debt: Belo is more conservatively financed, possibly due to being a regional player and lacking the size of New York Times. - Gross profit: Belo struggles with a higher COGS, possibly due to high employee wages and benefits. - SG\&A expense percentage: Belo reports zero SG\&A expenses, possibly because management could not differentiate SG\&A expenses from its operating expenses. - Dividend payout: Belo has a negative dividend payout, which is due to paying a dividend while reporting a loss. - Cash and short-term investments: Both companies have high cash balances. The first description aligns with company A which is Delta. The second description aligns with company B which is JetBlue. One ratio I used in making my decision was the inventory turnover ratio. Company A has an inventory turnover ratio of only 37 , while company B has an inventory turnover ratio of 85.4. The second description describes a company that carries only three different aircraft, which makes maintenance easier and requires less parts, which would keep inventory turnover high, this matches up with company B-JetBlue. The first description describes a company which owns its own refinery to supply its own jet fuel and merged with one of the largest airplane carriers in the US, this matches up with company A-Delta, which owns and maintains about thirty different aircraft models, and would support such low inventory turnover ratio. Another ratio I used in making my decision was the dividend payout. Company A has a dividend payout of 7.9 while company B has a zero-dividend payout. The second description describes a company with mostly organic growth, that expands its routes through buying new aircraft and buying the rights to use new airports, reinvesting their revenue into the company, this would match with company BJetBlue's zero dividend payout. The first description describes a company which merged with one of the biggest airline carriers in the US, which would not be consistent with reinvesting the revenues into the company to expand the company. On its 2020 Balance Sheet, Liddle Inc. reported Currents Assets of $215,000, Net Fixed Assets of $1,300,000, Long-Term Debt of $780,000, and Total Equity of $600,000. On the 2021 Balance Sheet, Net Fixed Assets are $1,150,000 and Net Working Capital is $240,000.On the 2021 Income statement, the firm reported Sales of $2,550,000, Earnings Before Interest and Taxes of $1,435,000 and Depreciation of $225,000.In 2021, the firms Cash Flow from Assets was $1,209,250.What were the firms Taxes in 2021? ? [Present the answer rounded to the nearest dollar, e.g. 359462] An Investor Invests $111,000 In A Managed Fund At The Beginning Of Year 1. Over The Course Of The First Year The Value Of The Fund Increases By $21679. At The End Of Year 1, The Investor Invests Another $43,000. Over The Course Of The Second Year The Value Of The Fund Falls By $18178. At The End Of Year 2 The Investor Invests Another $41,000. At The End OfAn investor invests $111,000 in a managed fund at the beginning of Year 1. Over the course of the first year the value of the fund increases by $21679. At the end of Year 1, the investor invests another $43,000. Over the course of the second year the value of the fund falls by $18178. At the end of Year 2 the investor invests another $41,000. At the end of Year 3 the value of the fund has increased to $250297, which the investor then withdraws. What is the annual rate of return from this investment the point of view of the portfolio manager?a. 11%b. 9%c. 14%d. 10% Two sides and an angle (SSA) of a triangle are given. Determine whether the given measurements produce one triangle, two triangles, or no triangle at all. Solve each triangle that results. a 10, c-7.1, A=68 Selected the correct choice below and, if necessary, fill in the answer boxes to complete your choice. (Round side lengths to the nearest tenth and angle measurements to the nearest degree as needed.). OA. There is only one possible solution for the triangle. The measurements for the remaining side b and angles C and B are as follows. CA BA OB. There are two possible solutions for the triangle The measurements for the solution with the the smaller angle C are as follows C B The measurements for the solution with the the larger angle C are as follows C B% OC. There are no possible solutions for this triangle. The serum cholesterol levels (in mg 237, 213, 244, 201, 215, 196, 240, 247, 235, 242, 220, 257, 203, 228, 206, 198, 189 Send data to calculator (b) dL Find 30th and 75th percentiles for these cholesterol levels. (If necessary, consult a list of formulas.) The 75th ) of 17 individuals are mg (a) The 30th percentile: dL percentile: mg dL (0)A labor rights group wants to determine the mean salary of app-based drivers. If she knows that the standard deviation is $2.7, how many drivers should she consider surveying to be 99% sure of knowing the mean will be within $0.71?27797001096 General Electric recently had to put together a $50 million bid, denominated in Swiss francs, to upgrade a Swiss power plant. If it won, General Electric expected to pay subcontractors and suppliers in five currencies. The payment schedule for the contract stretched over a five year period.How should General Electric establish the Swiss franc price of its $50 million bid?What exposure does GE face on this bid? How can it hedge that exposure? 100 01 When visiting family,friends,and relatives,5-year-old Roger typically likes to run through the house,jumping up and down on furniture.His visits leave behind a trail of broken household objects and toys,spilled drinks and food and dirty linens.His parents never correct him or try to occupy him quietly.Their parenting style is best described as permissive authoritarian authoritative relational If f(x)=sinx, then f(x 2) is equal to A) cosx B) sinx C) 1+sinx D) cosx E) None of the above int i = 0, r, t, choice; //constructor Sky Co. employed Tom Mills in Year 1. Tom earned $5,300 per month and worked the entire year. Assume the Social Security tax rate is 6 percent for the first $130,000 of earnings, and the Medicare tax rate is 1.5 percent. Tom's federal income tax withholding amount is $930 per month. Use 5.4 percent for the state unemployment tax rate and 0.6 percent for the federal unemployment tax rate on the first $7,000 of earnings per employee. Assume that instead of $5,300 per month Tom earned $11,600 per month. Based on this new level of income Tom's new federal income tax withholding is $2,000. What is Tom's net pay? (Round your answers to 2 decimal places.) Assume that instead of $5,300 per month Tom earned $11,600 per month. Based on this new level of income Tom's new federal income tax withholding is $2,000. What amount does Tom pay monthly in FICA payroll taxes? (Round your answers to 2 decimal places.) Assume that instead of $5,300 per month Tom earned $11,600 per month. Based on this new level of income Tom's new federal income tax withholding is $2,000. What is the total payroll tax expense for Sky Co. for January, Year 1 ? February, Year 1? March, Year 1? December, Year 1? (Round your answers to 2 decimal places.)