purab bought twice the number of rose plants that he had in his lawn. however, he threw 3 plants as they turned bad. after he planted new plants, there were total 48 plants in the garden. how many plants he had in his lawn earlier?​

A sample size of 9604 is needed to estimate the percentage of full-time college students who earn a bachelor's degree in four years or less, with a 95% confidence level and a margin of error of 0.01.

To find the sample size needed to estimate the percentage of full-time college students who earn a bachelor's degree in four years or less, we can use the following formula:

n = [Z^2 * p * (1 - p)] / E^2

where:

Z is the z-score associated with the desired confidence level (95%), which is 1.96
p is the estimated proportion of students who earn a bachelor's degree in four years or less (since we don't have any prior knowledge, we can use 0.5 as a conservative estimate)
E is the margin of error, which is 0.01
Plugging in the values, we get:

n = [(1.96)^2 * 0.5 * (1 - 0.5)] / (0.01)^2
n = 9604

Therefore, a sample size of 9604 is needed to estimate the percentage of full-time college students who earn a bachelor's degree in four years or less, with a 95% confidence level and a margin of error of 0.01.

To learn more about sample size go to:

https://brainly.com/question/30885988?referrer=searchResults

#SPJ11

The expression that represents the area of the parking lot is (5 - 7) * (3 + 4).

The length of the parking lot can be represented as (5 - 7), which simplifies to -2. The width of the parking lot can be represented as (3 + 4), which simplifies to 7. To find the area of a rectangle, we multiply the length by the width.

Therefore, the expression that represents the area of the parking lot is (-2) * 7. Multiplying -2 by 7 gives us -14. So, the area of the parking lot is -14 square units.

However, it is important to note that negative areas do not have practical meaning in this context, as areas are typically positive values. Therefore, the area of the parking lot would be considered 14 square units.

Learn more about length
brainly.com/question/16531141

#SPJ11

Step 1: Answer

The point (2, 8) is the point (x1, y1) identified from the equation y - 8 = 3(x - 2).

Step 2: Explanation

The equation y - 8 = 3(x - 2) is in point-slope form, which is y - y1 = m(x - x1), where (x1, y1) is the point on the line and m is the slope of the line. In this case, the slope of the line is 3, which means that for every increase of 1 in the x-coordinate, the y-coordinate increases by 3.

Comparing the given equation with the point-slope form, we can see that x1 = 2 and y1 = 8. Therefore, the point (2, 8) is the point identified from the equation.

The remaining distance after 33 minutes of driving = 58.8 miles.

Here, the slope of a linear function the remaining distance to drive (in miles) is -0.85

For this situation, we can write a linear equation as,

remaining distance = (slope)(drive time) + (intercept)

remaining distance = -0.85(drive time) + (intercept)      

y =  -0.85x + c        ..........(1)

where y represents the remaining distance

x is the drive time

and c is the y-intercept

Here, Laura has 52 miles remaining after 41 minutes of driving.

i.e., x = 41 and y = 52

Substitute these values in equation (1)

52 =  -0.85(41) + c    

c = 52 + 34.85

c = 86.85

So, equation (1) becomes,

y =  -0.85x + 86.85

Now, we need to find the remaining distance after 33 minutes of driving.

i.e., the value of y for x = 33

y =  -0.85(33) + 86.85

y =  -28.05 + 86.85        

y = 58.8

This is the remaining distance 58.8 miles.

Learn more about the slope here:

https://brainly.com/question/30216543

#SPJ1

Answer:

89.6°

Step-by-step explanation:

180-90.4=89.6°

Answer: 89.6

Step-by-step explanation:

Supplementary means angles adding up to 180

180-90.4  = x

x=89.6   this is your supplemental angle

the volume of the basketball is approximately 490 cubic inches. we can get this answer by using volume formula of volume

what is approximately ?

"Approximately" means almost, but not exactly. It is used to indicate that a value or quantity is very close to the true or exact value, but there may be a small difference or error. In mathematical terms, an approximate value is an estimate or a rounded value that is used

In the given question,

To find the volume of the basketball, we first need to find its radius.

Circumference of a sphere = 2πr

29.516 = 2 * 3.14 * r

r = 29.516 / (2 * 3.14) ≈ 4.7 inches (rounded to one decimal place)

Now, we can use the formula for the volume of a sphere:

Volume of sphere = (4/3) * π * r^3

Volume of basketball = (4/3) * 3.14 * (4.7)^3

Volume of basketball ≈ 490 cubic inches (rounded to the nearest whole number)

Therefore, the volume of the basketball is approximately 490 cubic inches..

To know more about approximately  , visit:

https://brainly.com/question/30945002

#SPJ1

The probability of the spinner not landing on red and then landing on red is 7/64.

The probability chance that the spinner will not land on red then land on red is calculated as follows;

The probability of the spinner not landing on red is 1 - 1/8 = 7/8.

To find the probability that the spinner will not land on red and then land on red, we multiply the probabilities:

(7/8) x (1/8) = 7/64

Learn more about probability here: https://brainly.com/question/24756209

#SPJ4

The two aircraft are 128.535 far away.

What is the distance formula?

The d-distance between two places is calculated using the distance formula. The Euclidean distance formula is another name for the formula used to calculate the separation between two points on a two-dimensional plane.

Here, we have

Given: Two radars A and B are 80km apart and B is due to the east of A. One aircraft is on a bearing of 030 degrees from A and 346 degrees from B. A second aircraft is on a bearing 325 degrees from A and 293 degrees from B.

Calculating the Slope of AC,  tan60° = 1.732

Calculating the Slope of BC, tan104° = -4.011

Calculating the Slope of AD, tan125° = -1.482

Calculating the Slope of BD, tan157° = -0.424

When pointing C intercepts:

y₁ = 1.732x₁....(1)

y₁ = -4.011(x₁-80)....(2)

Solving equation(1) and(2) , we get

x₁ = 55.873

y₁ = 96.772

When point D intercepts:

y₂ = -1.428x₂....(3)

y₂ = 0.424(x₂-80)....(4)

Solving equations (3) and (4), we get

x₂ = 18.315

y₂  = -26.154

Calculating distance by applying the distance formula:

D = [tex]\sqrt{(y_2-y_1)^2+(x_2-x_1)^2}[/tex]

D = [tex]\sqrt{(-26.154-96.772)^2+(18.315-55.873)^2}[/tex]

D = [tex]\sqrt{4986.9019+1410.6033}[/tex]

D = 128.535

Hence, the two aircraft are 128.535 far away.

To learn more about the distance formula from the given link

https://brainly.com/question/28551043

#SPJ4

A) The acute angles equivalent to 70 degrees, 110 degrees, and 250 degrees are all 20 degrees.

B) The characteristics of a reference angle is acute and positive.

C) Because reference angle only depends on quadrant.

A. Three different angles which could have a reference angle of 20 degrees are 70 degrees, 110 degrees, and 250 degrees. To arrive at this answer, we need to subtract 20 degrees from 90 degrees, which gives us 70 degrees. To find the other two angles, we add 180 degrees to 70 degrees, which gives us 250 degrees, and we subtract 180 degrees from 110 degrees, which gives us 290 degrees. However, since we're looking for angles with a reference angle of 20 degrees, we have to find the acute angle between 0 and 90 degrees that is equivalent to these angles. So, we subtract 90 degrees from 250 degrees, which gives us 160 degrees, and we subtract 90 degrees from 290 degrees, which gives us 200 degrees. The acute angles equivalent to 70 degrees, 110 degrees, and 250 degrees are all 20 degrees.

B. The characteristics of a reference angle are that it is always an acute angle, it is the smallest angle between the terminal side of the given angle and the x-axis, and it is always positive.

C. Angles can have different measurements but still have the exact same reference angle because the reference angle only depends on the quadrant in which the terminal side of the angle lies. For example, an angle of 50 degrees and an angle of 310 degrees are both in the fourth quadrant and therefore have the same reference angle of 40 degrees. Similarly, an angle of 100 degrees and an angle of 260 degrees are both in the third quadrant and therefore have the same reference angle of 10 degrees.

To learn more about reference angle

https://brainly.com/question/15069329

#SPJ11

Answer:5

Step-by-step explanation:
4780/25=191.2
You don't want an odd amount of castings in different piles.
191*25=4755
4780-4755=5









I think i read the question wrong. Sorry if i did

When separating 4,780 castings into 25 piles, there will be 5 castings left over.

A fraction is a numerical expression representing a part of a whole. It consists of a numerator (the top number) that indicates how many parts are considered, and a denominator (the bottom number) that shows the total number of equal parts in the whole. Fractions are typically expressed as a/b, where "a" is the numerator and "b" is the denominator. They are used in various mathematical operations, including addition, subtraction, multiplication, and division, and in real-life scenarios involving proportions and portions.

In order to determine the number of castings left over when separating 4,780 castings into 25 piles, we can use division. Divide 4,780 by 25 to find the number of castings in each pile.

The quotient is 191.2. Since we can't have a fraction of a casting, we round down to 191.

To find the number of castings left over, subtract the total number of castings in the piles from the original total. 4,780 - (191 x 25)

= 4,780 - 4,775

= 5

Therefore, when you complete the job, you will have 5 castings left over.

https://brainly.com/question/25957212

#SPJ2

The graphs of the sinusoidal function for the question 1 to 4 created with MS Excel are attached

5. The function is; y = cos(θ) + 2

6. The function is; y = sin(2·θ) - 4

A sinusoidal function is a smooth periodic or repetitive function based on the sine or cosine of an angle.

The equations for the graphs in the sinusoidal function indicates that we get;

The period = 2·π/B

The horizontal shift = -C/B

The vertical shift = D

Where;

B = The coefficient of the angle, θ

C = The constant within the parenthesis

D = The constant term outside the sine or cosine function parenthesis

1. y = 2·sin(2·θ + 1)

The function indicates that the amplitude is 2, the period is 2·π/2 = π, the vertical shift is 0, and the horizontal shift is -1/2

Please find attached the graph of the function, created with MS Excel

2. y = -cos(θ) - 2

The amplitude is 1

The period is 2·π

The horizontal shift is 0

The vertical shift is -2

Please find attached the graph of the function y = -cos(θ) - 2, created with ms Excel

3. y = 4·cos(3·θ -2)

The amplitude is 4

The period is 2·π/3

The horizontal shift is 0

The vertical shift is -2

Please find attached the graph of the function y = 4·cos(3·θ -2), created with MS Excel

4. y = 3·sin(6·θ) - 1

The amplitude is 3

The period is π/3

The horizontal shift is 0

The vertical shift is -1

Please find attached the graph of the function y = 3·sin(6·θ) - 1, created with MS Excel

5. The points on the graph are;

Peak; (0, 3)

The next adjacent trough; (180, 1)

The adjacent peak; (360, 3)

Therefore;

The amplitude is 1

The period is 360°

The horizontal shift is 2

The vertical shift is 0

The peak point at θ = 0, indicates;

The function is; y = cos(θ) + 2

6. The points on the graph are;

Peak; (45, -3)

The next adjacent trough; (135, -5)

The adjacent peak; (225, -3)

Therefore;

The amplitude is 1

The period is 180 = π radians

The horizontal shift is 0

The vertical shift is -4

The function is; y = sin(2·θ) - 4

Learn more on sinusoidal functions here: https://brainly.com/question/2410297

#SPJ1

The mass of the original sample was approximately 1592.5 grams.

The half-life of an element is the time it takes for half of a given sample of that element to decay.

Let's assume that the original mass of the sample was x grams.

After the first half-life of 8 years, the mass of the sample would be x/2 grams.

After the second half-life (16 years total), the mass would be x/4 grams.

After the third half-life (24 years total), the mass would be x/8 grams.

We can continue this pattern until we get to 100 years (which is 12.5 half-lives):

Mass after 100 years = x/2^12.5

We also know from the problem that the mass after 100 years is 10 grams:

x/2^12.5 = 10

Solving for x:

x = 10 x 2^12.5

x ≈ 1592.5 grams

Therefore, the mass of the original sample was approximately 1592.5 grams.

Learn more about mass

brainly.com/question/19694949

#SPJ11

This will ensure that his check register accurately reflects his current account balance and transaction history.

This table represents Rico's check register, and on August 15th, he made a transfer of $30.00 from his savings account into his checking account.

To record this transaction on his check register, Rico should enter it as a deposit in his checking account column, and also include a note indicating that the deposit was a transfer from his savings account.

This will ensure that his check register accurately reflects his current account balance and transaction history.

To know more about account balance refer here

https://brainly.com/question/28699225#

#SPJ11

To optimize the company's inventory costs, we need to determine the optimal order quantities for both tablets and laptops.

Let's start by finding the optimal order quantity for tablets:

Total cost (TC) = ordering cost + holding cost

Ordering cost = (demand rate/order quantity) x ordering cost per shipment

Holding cost = (order quantity/2) x unit cost x holding cost rate

We can set these two costs equal to each other and solve for the optimal order quantity (Q):

(demand rate/Q) x ordering cost per shipment = (Q/2) x unit cost x holding cost rate

Solving for Q, we get:

Q = sqrt((2 x demand rate x ordering cost per shipment)/(unit cost x holding cost rate))

Plugging in the values given in the problem, we get:

Q = sqrt((2 x 10000 x 10000)/(100 x 0.25)) = 2000

Therefore, the optimal order quantity for tablets is 2000 units per shipment.

Next, let's find the optimal order quantity for laptops:

Following the same procedure as for tablets, we get:

Q = sqrt((2 x 4000 x 10000)/(400 x 0.25)) = 2000

Therefore, the optimal order quantity for laptops is also 2000 units per shipment.

In summary, the company should place orders of 2000 units each for both tablets and laptops to minimize its inventory costs.

To Know more about inventory costs refer here

https://brainly.com/question/31757705#

#SPJ11

If the base of the roof is 32 feet long, then the area of the triangular roof is 256 square feet.

In the given scenario, we are provided with information about a triangular roof. It is mentioned that the base of the roof is 32 feet long, and we need to determine the area of the triangular roof.

To calculate the area of a triangle, we need to know the length of the base and the height. In this case, we are given that the height is half the length of the base, which can be expressed as h = (1/2) * b.

Since we are given that the base length, b, is 32 feet, we can substitute this value into the height equation to find the height of the triangle: h = (1/2) * 32 feet = 16 feet.

Now that we have the base length (b = 32 feet) and the height (h = 16 feet), we can use the formula for the area of a triangle: A = (1/2) * b * h.

Substituting the values, we have A = (1/2) * 32 feet * 16 feet = 256 square feet.

Therefore, the area of the triangular roof is determined to be 256 square feet. This represents the amount of surface area covered by the triangular section of the roof.

Let the base of the triangular roof be denoted by b, and its height be denoted by h. We are given that

h = (1/2) * b, and that

b = 32 feet.

We can use this information to find the area A of the roof as follows:

A = (1/2) * b * h

 = (1/2) * 32 feet * (1/2) * 32 feet

 = 256 square feet

Therefore, the area of the triangular roof is 256 square feet.

To know more about area refer to

https://brainly.com/question/25292087

#SPJ11

Area of sector NPQ ≈ 127.23 square units

To find the area of the sector NPQ, we first need to find the measure of the central angle that defines the sector. We know that the measure of the angle NPQ is 104 degrees, but we need to find the measure of the central angle that includes this arc.

Since NP is a radius of the circle, we know that triangle NQP is an isosceles triangle, with angles NQP and PNQ each measuring (180 - 104)/2 = 38 degrees. Therefore, the measure of the central angle that includes arc NPQ is 2 * 38 + 104 = 180 degrees.

The area of the sector NPQ is then a fraction of the total area of the circle, where the fraction is equal to the ratio of the central angle to the total angle around the circle. Since the total angle around a circle is 360 degrees, the fraction of the circle's area covered by the sector is:

180 degrees / 360 degrees = 1/2

Therefore, the area of the sector NPQ is equal to half the area of the circle with radius 9 units:

Area of sector NPQ = (1/2) * π * 9^2 = 40.5π

Rounding to the nearest hundredth, the area of the sector NPQ is approximately:

Area of sector NPQ ≈ 127.23 square units

To know more about area refer to

https://brainly.com/question/25292087

#SPJ11

In the scenario you mentioned, the part of the Federal Reserve's congressional mandate that is triggered is both price stability and maximum sustainable employment.

The Federal Reserve has a dual mandate from Congress which consists of:

1. Price stability: This objective aims to maintain a stable inflation rate, ensuring that the purchasing power of money remains relatively constant over time. Price stability helps households and businesses make informed decisions regarding investments and consumption.

2. Maximum sustainable employment: This objective focuses on maintaining a high level of employment while avoiding unsustainable economic growth that could lead to high inflation. Achieving maximum sustainable employment involves minimizing unemployment while not causing inflation to rise significantly.

In the scenario you mentioned, the Federal Reserve would need to carefully balance its monetary policy to ensure that both objectives, price stability and maximum sustainable employment, are achieved. This might involve adjusting interest rates or using other monetary policy tools to influence economic activity, employment levels, and inflation.

To know more about "Federal Reserve' refer here:

https://brainly.com/question/19273629#

#SPJ11

Lana would pick a non-striped marble about 294 times.

The probability of picking a marble that is not striped is 100% - 8% = 92% = 0.92. This means that for each pick, the probability of getting a non-striped marble is 0.92.

If Lana picks a marble and replaces it 320 times, the number of times she would pick a non-striped marble can be predicted by multiplying the probability of getting a non-striped marble by the number of picks.

So, the number of times she would pick a non-striped marble is:

0.92 x 320 = 294.4

Rounding to the nearest whole number = 294.

To learn more about marble here:

https://brainly.com/question/16918319

#SPJ1

To find the critical points of f(x) = x - 18x² + 96x, we need to find the values of x where f'(x) = 0.

f'(x) = 1 - 36x + 96

Setting f'(x) = 0, we get:

-36x + 97 = 0

x = 97/36

So the critical point is (97/36, f(97/36)).

To use the Second Derivative Test, we need to find f''(x):

f''(x) = -36

At the critical point x = 97/36, f''(97/36) = -36 < 0.

Since f''(97/36) is negative, the Second Derivative Test tells us that the critical point corresponds to a local maximum.

Therefore, the critical point (97/36, f(97/36)) is a local maximum.
To find the critical points of the function f(x) = x - 18x² + 96x, we first need to find its first derivative, f'(x), and then set it to zero to find the critical points.

1. Find the first derivative, f'(x):
f'(x) = d/dx (x - 18x² + 96x) = 1 - 36x + 96

2. Set f'(x) to zero and solve for x:
0 = 1 - 36x + 96
36x = 95
x = 95/36

Now, let's use the Second Derivative Test to determine if this critical point corresponds to a local minimum or maximum.

3. Find the second derivative, f''(x):
f''(x) = d/dx (1 - 36x + 96) = -36

4. Evaluate f''(x) at the critical point x = 95/36:
f''(95/36) = -36

Since f''(95/36) is negative, the Second Derivative Test tells us that the critical point x = 95/36 corresponds to a local maximum.

Learn more about Second Derivative Test here: brainly.com/question/29753185

#SPJ11

Answer:

D

Step-by-step explanation:

25x+75=750

25x=675

x=27

we can't go over this amount, but we can have 27 employees, so it will be equal as well.

x<27 and x=27

Answer: 36 inches

Step-by-step explanation:

The lateral surface area of a cube with sides of length 3 inches is given by the sum of the areas of all four side faces. Each side face is a square with an area equal to the product of the length and width, which in this case is 3 inches by 3 inches. Therefore, the lateral surface area of the cube is:

LSA = 4 x (3 inches x 3 inches) = 36 square inches

So the lateral surface area of the cube is 36 square inches

The new total bill including the tip of 15% is $59.01.

To find the amount of the tip, we can multiply the total bill by the percentage as a decimal:

tip = 0.15 * $51.31 = $7.70

To find the new total including the tip, we can add the tip to the original bill:

new total = $51.31 + $7.70 = $59.01

So the new total, including a 15% tip, will be $59.01.

Read more about sales tax at

https://brainly.com/question/9437038

#SPJ1

if one side of triangle is approximately 10 feet, the height of the attic is approximately 8.66 feet.

To find the height h of an equilateral triangle, we need to know the length of one of its sides. However, this information is not given in the question.

We can use the Pythagorean theorem to find an approximate value of h. Let's assume that the length of one side of the equilateral triangle is 10 feet (this is just an arbitrary value for illustration purposes).

Then, the height h can be found using the formula:

h = √(10² - (10/2)²)

h = √(100 - 25)

h = √75

h ≈ 8.66 feet

So, if one side of the equilateral triangle is approximately 10 feet, the height of the attic is approximately 8.66 feet. However, if the length of the side is different, the height will also be different.

Know more about triangle here:

https://brainly.com/question/2773823

#SPJ11

we need to determine the minimum mean length between consecutive flaws that would result in a 1 in 100 chance that a randomly selected 3-foot segment of wire provided by the new supplier will be flawless.
First, we need to convert the length of the wire provided by the new supplier (50 inches) into feet, which is 4.17 feet (50 inches divided by 12).

Next, we can use the Poisson distribution formula to calculate the probability of getting at least one flaw in a 3-foot segment of wire:
P(X >= 1) = 1 - e^(-λ)

Where X is the number of flaws in a 3-foot segment, and λ is the mean number of flaws per 3-foot segment.
Since the supplier claims that the average length between flaws is 4.17 feet, we can calculate λ as:
λ = 1/4.17 = 0.239

Now, we can plug in the values and solve for the probability:
P(X >= 1) = 1 - e^(-0.239) = 0.208
This means that there is a 20.8% chance of getting at least one flaw in a 3-foot segment of wire provided by the new supplier.

To find the minimum mean length between consecutive flaws that would result in a 1 in 100 (or 0.01) chance of getting a flawless 3-foot segment, we can rearrange the Poisson formula:
P(X = 0) = e^(-λ)
0.01 = e^(-λ)

ln(0.01) = -λ
λ = 4.605

This means that the mean length between consecutive flaws would need to be at least 4.605 feet (55.26 inches) in order to have a 1 in 100 chance of getting a flawless 3-foot segment from the new supplier.

In conclusion, if the new supplier's claim is valid and the mean length between consecutive flaws is at least 55.26 inches, then Gebhardt Electronics can expect to get a flawless 3-foot segment of wire with a 1 in 100 probability.

To know more about Gebhardt refer here

https://brainly.com/question/28445889#

#SPJ11

a The purpose of this report is to investigate the advantages and limitations of the annual budgeting system to determine whether the elimination of the system is a good idea.

b Report on the Advantages and Limitations of an Annual Budgeting System This report investigates the advantages and limitations of an annual budgeting system. The purpose is to assess the feasibility of eliminating the annual budgeting system at Brooklane Ltd. By analyzing academic sources, we can gain insights into the potential benefits and drawbacks of such a decision.

The annual budgeting system has several advantages. Firstly, it allows organizations to set financial goals and targets for the coming year. This helps organizations to allocate resources and prioritize their spending to achieve their goals.

Limitations of an Annual Budgeting System is that despite its advantages, the annual budgeting system also has limitations. Firstly, it can be time-consuming and costly to prepare, especially for larger organizations. This can divert resources from other important areas of the organization.

In conclusion, the annual budgeting system has both advantages and limitations.

Learn more about budget on

https://brainly.com/question/6663636

#SPJ4

From the given data 11 is the mean of the data set.

What is Mean ?

In statistics, the mean (also called the average) is a measure of central tendency that represents the typical value in a data set. It is calculated by adding up all the values in the data set and dividing by the number of values.

To find the value of x in the data set, we can use the formula for the mean (also called the average). The mean is calculated by adding up all the values in the data set and dividing by the number of values. In other words:

mean = (sum of all values) : (number of values)

We are given that the mean of the data set is 11, so we can write:

11 = (12 + 9 + 12.5 + 13 + x + 10 + 11 + 11 + 7 + 9) : 10

Here, we have 10 values in the data set (including the unknown value x), so we divide the sum of all the values by 10 to find the mean.

To solve for x, we can start by simplifying the right-hand side of the equation:

110 = 75.5 + x

Next, we can isolate x by subtracting 75.5 from both sides:

x = 34.5

Therefore, the value of x that makes the mean of the data set equal to 11 is x = 34.5.

In other words, if we replace the unknown value x with 34.5, the resulting data set will have a mean of 11. This means that the sum of all the values in the data set will be 110, since:

12 + 9 + 12.5 + 13 + 34.5 + 10 + 11 + 11 + 7 + 9 = 110

And when we divide this sum by 10, we get:

110 : 10 = 11

Therefore, From the given data 11 is the mean of the data set.

To learn more about Mean from given link.

https://brainly.com/question/21533310

#SPJ1

Answer:

To solve this problem, we need to find the times when two or more buses arrive at X at the same time between 5:00 p.m. and 10:00 p.m. We can start by finding the arrival times of each bus at X.

Bus A arrives at X every 32 minutes (12 minutes to S + 20 minutes to X).

Bus B arrives at X every 48 minutes (20 minutes to T + 28 minutes to X).

Bus C arrives at X every 56 minutes (28 minutes to U + 28 minutes to X).

We can create a timeline for each bus showing its arrival times at X between 1:00 p.m. and 11:00 p.m.:

Bus A: X _ _ X _ _ X _ _ X _ _ X _ _ X _ _ X

Bus B: _ _ _ _ _ X _ _ _ _ _ X _ _ _ _ _ X

Bus C: _ _ _ _ _ _ _ X _ _ _ _ _ _ _ X _ _ _

The underscores represent the times when the bus is not at X.

Now we can look at the timeline between 5:00 p.m. and 10:00 p.m. (from the 8th to the 18th arrival of Bus A at X) and count the times when two or more buses arrive at X at the same time:

5:44 p.m. - Bus A and Bus B arrive at X at the same time.

6:24 p.m. - Bus A and Bus C arrive at X at the same time.

6:56 p.m. - Bus B and Bus C arrive at X at the same time.

7:36 p.m. - Bus A and Bus B arrive at X at the same time.

8:16 p.m. - Bus A and Bus C arrive at X at the same time.

8:48 p.m. - Bus B and Bus C arrive at X at the same time.

9:28 p.m. - Bus A and Bus B arrive at X at the same time.

10:08 p.m. - Bus A and Bus C arrive at X at the same time.

Therefore, there are 8 times between 5:00 p.m. and 10:00 p.m. when two or more buses arrive at X at the same time.

To know more about arrival refer here

https://brainly.com/question/14971744#

#SPJ11

A z-score of 0 means that the sample proportion is equal to the population proportion. Therefore, after using sampling distribution we can conclude that we agree with Aiden's expectation that the percentage for this sample will be 45%.

Based on the given information, we can assume that the population proportion of students who brought a can of food to contribute to the canned food drive is 0.45. Aiden picks a representative sample of 25 students, and he expects the percentage for this sample will be 45%.

We can use the sampling distribution formula to calculate the expected sample proportion:

SE = sqrt[p(1-p) / n]

where p is the population proportion, n is the sample size, and SE is the standard error.

Plugging in the values, we get:

SE = sqrt[0.45(1-0.45) / 25] = 0.0984

Next, we can use the normal distribution to find the z-score corresponding to a sample proportion of 0.45:

z = (0.45 - 0.45) / 0.0984 = 0

A z-score of 0 means that the sample proportion is equal to the population proportion. Therefore, we can conclude that we agree with Aiden's expectation that the percentage for this sample will be 45%.

To know more about sampling distribution, visit:

https://brainly.com/question/29375938#

#SPJ11

The solution of the system of equations is

A system of equations is a set of two or three equations.

Given the system of equations

x + y = 5 (1)

y + z = 6 (2)

z + x = 9 (3)

Givent he guide (1) - (2) x - z = - 1 (4), we proceed to solve the system of equations

Now, taking equations (3) and (4), we have that

z + x = 9 (3)

x - z = - 1 (4)

Adding them we have that

z + x = 9 (3)

+

x - z = - 1 (4)

2x = 9 - 1

2x = 8

x = 8/2

x = 4

From equation (3)

z = 9 - x

So, substituting the value of x into the equation, we have that

z = 9 - x

z = 9 - 4

z = 5

From equation (2)

y = 6 - z

So, substituting z into the equation, we have that

y = 6 - z

= 6 - 5

= 1

So,

Learn more about system of equations here:

https://brainly.com/question/28405823

#SPJ1

A rhombus with a diagonal of 26.4 cm and an area of 204.6 square cm has another diagonal of length 15.5 cm

Rhombus is a 2-Dimensional shape. It is a quadrilateral. It is a specialized form of a parallelogram. All sides of a rhombus are equal in length.

Similar to a parallelogram, it has opposite sides parallel to each other and opposite angles of equal magnitude.

The area of a rhombus is expressed as half of the product of diagonals.

A = 0.5pq

A is the area

p is the length of one diagonal

q is the length of another diagonal

A = 204.6 square cm

p = 26.4 cm

204.6 = 0.5 * 26.4 * q

q = 15.5 cm

Learn more about Rhombus:

https://brainly.com/question/29629002

#SPJ4