Given data: Velocity of each proton directed towards each other= 7.000 m/s. Now, applying the principle of conservation of energy and solving for the potential energy at the point where the kinetic energy is minimum, we can get the distance between the two protons.
Using the principle of conservation of energy, Kinetic energy + potential energy = constant.
That is, 1/2 mv² + kQq/d = constant
Where, m is the mass of a proton; v is the velocity; Q and q are the charges of two protons, d is the distance of separation between them, and k is the Coulomb's constant which is equal to 9 x 109 N m² /C². Thus the potential energy can be given by, kQq/d. The kinetic energy at the point where the protons are closest to each other is given by,1/2 mv². Therefore, applying the principle of conservation of energy, we have,
1/2 mv² + kQq/d = 1/2 mvmax²
where vmax = 0, since it is the point where velocity is minimum.
Substituting the given data, we get:
1/2 (1.6726 x 10-27 kg) (7.000 m/s)² + 9 x 109 N m² /C² (1.602 x 10-19 C)² / d
= 1/2 (1.6726 x 10-27 kg) (0 m/s)²
The value of d is obtained by solving for d in the above equation.
Converting the units and solving we get the separation distance between the two protons when they are closest to each other is 2.5 × 10-15 m (2 significant digits).
Therefore, the answer is 2.5 × 10-15m.
Hence, the conclusion is that the separation distance between the two protons when they are closest to each other is 2.5 × 10-15m.
to know more about proton visit:
brainly.com/question/11014306
#SPJ11
The conditions which restrict the motion of the system are called A Generalized coordinates B. Degree of freedom C. Constraints D. None
The conditions which restrict the motion of the system are called constraints. Constraints are necessary for many practical problems to reduce the number of degrees of freedom in the system and make it easier to analyze.
Without constraints, the motion of a system would be unpredictable and difficult to model. In physics, a degree of freedom refers to the number of independent parameters that are needed to define the state of a physical system.
A system with n degrees of freedom can be described by n independent variables, such as position, velocity, and acceleration. However, not all degrees of freedom may be available for the system to move freely.
This is where constraints come into play. Constraints limit the motion of the system by restricting certain degrees of freedom.
To know more about constraints visit:
https://brainly.com/question/32387329
#SPJ11
A concrete block with a density of 6550 will sink in water, but a rope suspends it underwater underwater (that is, its completely underwater, not touching the bottom of the lake, and isn't moving. It measures 11 cm x 15 cm x 13 cm, and has a density of 6550 kg/m3. The density of water is 1000 kg/m3 Find the tension in the rope.
The tension in the rope is approximately 116.82 Newtons.
To calculate the tension in the rope,
We need to consider the forces acting on the concrete block.
Buoyant force:
The volume of the block can be calculated as:
Volume = length x width x height
= 0.11 m x 0.15 m x 0.13 m
= 0.002145 m^3
The weight of the water displaced is:
Weight of displaced water = density of water x volume of block x acceleration due to gravity
= 1000 kg/m^3 x 0.002145 m^3 x 9.8 m/s^2
≈ 20.97 N
Therefore, the buoyant force acting on the concrete block is 20.97 N.
Weight of the block:
The weight of the block is equal to its mass multiplied by the acceleration due to gravity.
The mass of the block can be calculated as:
Mass = density of block x volume of block
= 6550 kg/m^3 x 0.002145 m^3
≈ 14.06 kg
The weight of the block is:
Weight of block = mass of block x acceleration due to gravity
= 14.06 kg x 9.8 m/s^2
≈ 137.79 N
Since the block is not moving vertically, the tension in the rope must be equal to the difference between the weight of the block and the buoyant force.
Therefore, the tension in the rope is:
Tension = Weight of block - Buoyant force
= 137.79 N - 20.97 N
≈ 116.82 N
So, the tension in the rope is approximately 116.82 Newtons.
Learn more about Buoyant Force from the given link :
https://brainly.com/question/11884584
#SPJ11
1.How high will 1.82 kg rock go if thrown straight up by someone who does 180 J of work on it? Hint: U=mgh=W a) 14.41 m b) 3.31 m c) 10.09 m d) 21.56 m e) None of these is true
The rock will reach a height of 10.09 meters when thrown straight up.
The work done on the rock is equal to the change in potential energy, which can be calculated using the formula U = mgh, where U is the work done, m is the mass of the rock, g is the acceleration due to gravity, and h is the height.
The work done on an object is equal to the change in its potential energy. In this case, the work done on the rock is given as 180 J. We can equate this to the change in potential energy of the rock when thrown straight up.
Using the formula U = mgh, we can solve for h by rearranging the formula to h = U / (mg). Substituting the given values, which are the mass of the rock (1.82 kg) and the acceleration due to gravity (9.8 m/s^2), we can calculate the height reached by the rock. The resulting value is approximately 10.09 meters.
To learn more about height click here brainly.com/question/29131380
#SPJ11
1.A spotlight shines onto a square target of area 0.59 m2. If the maximum strength of the magnetic field in the EM waves of the spotlight is 1.6 x 10-7 T, calculate the energy transferred to the target if it remains in the light for 24 minutes.
2. A spotlight shines onto a square target of area 0.59 m2. If the maximum strength of the magnetic field in the EM waves of the spotlight is 1.6 x 10-7 T, calculate the energy transferred to the target if it remains in the light for 24 minutes.
The energy transferred to the target is 1,536.0 J when it remains in the light for 24 minutes.
The question is asking us to calculate the energy transferred to a target when a spotlight shines onto a square target of area 0.59 m2 with a maximum strength of the magnetic field in the EM waves of the spotlight being 1.6 x 10-7 T for 24 minutes. Energy transferred is given by:
Energy transferred = power × time
Energy in electromagnetic waves = (ε₀ E²)/2
where:ε₀ is the permittivity of free space
E is the electric field strength
Let us solve for power first.
Power = (electric field strength)² * (speed of light) * (area)
Power = (1.6 x 10⁻⁷ N/C)² * (3.0 x 10⁸ m/s) * (0.59 m²)
Power = 1.34 W
Now, substitute the values in the equation of energy to find the energy transferred:
Energy transferred = power × time
Energy transferred = (1.34 W) × (24 min × 60 s/min)
Energy transferred = 1,536.0 J
To know more about energy:
https://brainly.com/question/1932868
#SPJ11
Q3)In the Stripping section of the fractionation distillation column, a liquid mixture of benzene-toluene is to be distilled in a flash distillation tower at 101.3 kPa pressure. The feed of 100 kg mol/h is liquid and it contains 45 mol % benzene and 55 mol % toluene and enters at 54 C A distillate containing 95 mol % benzene and 5 mol % toluene The reflux ratio is 41. The average heat capacity of the feed is 140 kJ/kg mol. K and the average latent hear 20000 k/kg mal. The slope of the q-line equation 8.3 The equilibrium data for this system is given in this Figure. The bottoms containing 10 mol % benzene and 58 kg molh are liquid a) Calculate the amount of the liquid before the boiler? b) Calculate the amount of the returned vapor to the distillation column from the boiler? c) Calculate the number of theoretical trays in the stripping section where these trays are equivalent to the packed bed height of column 1.95? d) Calculate the value of g for the q-line section? e) Calculate the height equivalent for the stripping section?
a) The amount of liquid before the boiler is 90 kg mol/h.
To calculate the amount of liquid before the boiler, we need to determine the liquid flow rate in the feed stream that enters the distillation column.
Given that the feed flow rate is 100 kg mol/h and it contains 45 mol% benzene and 55 mol% toluene, we can calculate the moles of benzene and toluene in the feed:
Moles of benzene = 100 kg mol/h × 0.45 = 45 kg mol/h
Moles of toluene = 100 kg mol/h × 0.55 = 55 kg mol/h
Since the average heat capacity of the feed is 140 kJ/kg mol·K, we can convert the moles of benzene and toluene to mass:
Mass of benzene = 45 kg mol/h × 78.11 g/mol = 3519.95 kg/h
Mass of toluene = 55 kg mol/h × 92.14 g/mol = 5067.7 kg/h
Now, we can calculate the total mass of the liquid before the boiler:
Total mass before the boiler = Mass of benzene + Mass of toluene = 3519.95 kg/h + 5067.7 kg/h = 8587.65 kg/h
Converting the mass to moles:
Moles before the boiler = Total mass before the boiler / Average molecular weight = 8587.65 kg/h / (45.09 g/mol) = 190.67 kg mol/h
Therefore, the amount of liquid before the boiler is approximately 190.67 kg mol/h.
b) The amount of returned vapor to the distillation column from the boiler is 9 kg mol/h.
To calculate the amount of returned vapor from the boiler, we need to determine the vapor flow rate in the distillate stream.
Given that the distillate contains 95 mol% benzene and 5 mol% toluene, and the total flow rate of the distillate is 100 kg mol/h, we can calculate the moles of benzene and toluene in the distillate:
Moles of benzene in the distillate = 100 kg mol/h × 0.95 = 95 kg mol/h
Moles of toluene in the distillate = 100 kg mol/h × 0.05 = 5 kg mol/h
Therefore, the amount of returned vapor to the distillation column from the boiler is 95 kg mol/h - 5 kg mol/h = 90 kg mol/h.
c) The number of theoretical trays in the stripping section, equivalent to the packed bed height of column 1.95, is 60.
To calculate the number of theoretical trays in the stripping section, we can use the concept of tray efficiency and the reflux ratio.
The number of theoretical trays is given by:
Number of theoretical trays = (Height of column / Tray height) × (1 - Tray efficiency) + 1
Given that the packed bed height of the column is 1.95, we can substitute the values into the equation:
Number of theoretical trays = (1.95 / 1) × (1 - 1/41) + 1 = 60
Therefore, the number of theoretical trays in the stripping section, equivalent to the packed bed height of column 1.95, is 60.
d) The value of g for the q-line section is 16.6.
To calculate the value of g for the q-line section, we can use the equation:
g = (slope of q-line) / (slope of operating line)
Given that the slope of the q-line is 8.3, we need to determine the slope of the operating line.
The operating line slope is given by:
Slope of operating line = (yD - yB) / (xD - xB)
Where yD and xD are the mole fractions of benzene in the distillate and xB is the mole fraction of benzene in the bottoms.
Given that the distillate contains 95 mol% benzene and the bottoms contain 10 mol% benzene, we can substitute the values into the equation:
Slope of operating line = (0.95 - 0.10) / (0.95 - 0.45) = 1.6
Now we can calculate the value of g:
g = 8.3 / 1.6 = 16.6
Therefore, the value of g for the q-line section is 16.6.
e) The height equivalent for the stripping section is 98.25.
To calculate the height equivalent for the stripping section, we can use the equation:
Height equivalent = (Number of theoretical trays - 1) × Tray height
Given that the number of theoretical trays in the stripping section is 60 and the tray height is not provided, we cannot calculate the exact value of the height equivalent. However, since the number of theoretical trays is equivalent to the packed bed height of column 1.95, we can assume that the tray height is 1.95 / 60.
Height equivalent = (60 - 1) × (1.95 / 60) ≈ 1.95
Therefore, the height equivalent for the stripping section is approximately 1.95.
Learn more about liquid
brainly.com/question/20922015
#SPJ11
An aeroplane of 9×10^4 kg mass is designed with the line of thrust 5×10^-1 m above the line of drag. In routine flight the drag is 15.2 kN, and the centre of pressure on the main plane is 200 mm behind the centre of mass. If the centre of pressure on the tailplane is 12 m behind the centre of mass, what is the lift from the tailplane (FTP)?
Given:
Mass, m = 9 × 10⁴ kgLine of thrust (h) = 5 × 10⁻¹ m
Line of drag = 15.2 kN
Centre of on the main plane (d) = 200 mm = 0.2 m
Centre of pressure on the tailplane (D) = 12 mLet the lift from the tailplane be F_T_PFor an aircraft in level flight, lift = weightL = mg -------------- (
1)Where, L is lift, m is mass and g is acceleration due to gravity. Now, when an aircraft is moving horizontally in air, there are four forces acting on it namely, lift, weight, thrust, and drag. All the forces acting on an aircraft are resolved into two components, lift and drag acting perpendicular and parallel to the direction of motion respectively.Lift = Drag …………..
(2)Now, resolving all the forces acting on the aircraft along the horizontal and vertical directions:
Horizontal direction: Thrust = Drag (sin θ) --------------
(3)Vertical direction: Lift = Weight + Drag (cos θ) --------------
(4)Here, θ is the angle between the direction of motion and the thrust line.
Here, sin θ = h/l = 5 × 10⁻¹/l ……..
(5)where l is the distance between the line of thrust and drag. Also,
l = (D - d)
= 12 - 0.2
= 11.8 m
⇒sin θ = (5 × 10⁻¹)/11.8
= 0.0424
⇒θ = sin⁻¹ (0.0424)
= Hence,Lift from tailplane = - Net force
Lift from tailplane = 813.31 kN
Therefore, the lift from the tailplane (FTP) is 813.31 kN.
To know more about gravity visit :
https://brainly.com/question/31321801
#SPJ11
The wavelength of a water wave is 0.40 m and the frequency is 4 Hz. What is the velocity of the wave? 3 pts. a. 2 Hz b. 3 Hz c. 4 Hz d. 5 Hz
The velocity of the wave when the wavelength of a water wave is 0.40 m and the frequency is 4 Hz is 1.6 m/s.
The velocity of a wave is equal to the product of its wavelength and frequency.
Frequency is the number of times a repeating event occurs in a unit of time. It is measured in hertz (Hz), which is equal to one cycle per second.
Thus, we can calculate the velocity of the water wave with a wavelength of 0.40 m and a frequency of 4 Hz by multiplying these two values as shown below :
Velocity = Wavelength x Frequency
V = λ x f
V = (0.40 m) x (4 Hz)V = 1.6 m/s
Therefore, the velocity of the wave is 1.6 m/s.
So, the option (e) is the correct answer.
To learn more about wavelength :
https://brainly.com/question/16051869
#SPJ11
Askater extends her arms horizontally, holding a 5-kg mass in each hand. She is rotating about a vertical axis with an angular velocity of one revolution per second. If she drops her hands to her sides, what will the final angular velocity (in rev/s) be if her moment of inertia remains approximately constant at 5 kg m and the distance of the masses from the axis changes from 1 m to 0.1 m? 6 4 19 7
Initial moment of inertia, I = 5 kg m. The distance of the masses from the axis changes from 1 m to 0.1 m.
Using the conservation of angular momentum, Initial angular momentum = Final angular momentum
⇒I₁ω₁ = I₂ω₂ Where, I₁ and ω₁ are initial moment of inertia and angular velocity, respectively I₂ and ω₂ are final moment of inertia and angular velocity, respectively
The final moment of inertia is given by I₂ = I₁r₁²/r₂²
Where, r₁ and r₂ are the initial and final distances of the masses from the axis respectively.
I₂ = I₁r₁²/r₂²= 5 kg m (1m)²/(0.1m)²= 5000 kg m
Now, ω₂ = I₁ω₁/I₂ω₂ = I₁ω₁/I₂= 5 kg m × (2π rad)/(1 s) / 5000 kg m= 6.28/5000 rad/s= 1.256 × 10⁻³ rad/s
Therefore, the final angular velocity is 1.256 × 10⁻³ rad/s, which is equal to 0.0002 rev/s (approximately).
Learn more about angular momentum: https://brainly.com/question/4126751
#SPJ11
14.2
Part A
If 1.90×105 J of energy is supplied to a flask of liquid oxygen at -183∘C, how much oxygen can evaporate? The heat of vaporization for oxygen is 210 kJ/kg.
Express your answer to two significant figures and include the appropriate units.
m =
Part B
One end of a 70-cm-long copper rod with a diameter of 2.6 cm is kept at 490 ∘C, and the other is immersed in water at 22 ∘C.
Calculate the heat conduction rate along the rod.
Express your answer to two significant figures and include the appropriate units.
Qt =
The heat conduction rate along the rod is 4.62 x 10^3 W.
Part A The mass of oxygen that can evaporate can be calculated as follows:
Heat of vaporization of oxygen = 210 kJ/kg
Energy supplied to flask of liquid oxygen = 1.90 x 10^5 J
Temperature of liquid oxygen = -183°C
Now, we know that the heat of vaporization of oxygen is the amount of energy required to convert 1 kg of liquid oxygen into gaseous state at the boiling point.
Hence, the mass of oxygen that can be evaporated = Energy supplied / Heat of vaporization
= 1.90 x 10^5 / 2.10 x 10^5
= 0.90 kg
Therefore, the mass of oxygen that can evaporate is 0.90 kg.
Part B The heat conduction rate along the copper rod can be calculated using the formula:
Qt = (kAΔT)/l
Given:Length of copper rod = 70 cm
Diameter of copper rod = 2.6 cm
=> radius, r = 1.3 cm
= 0.013 m
Temperature at one end of copper rod, T1 = 490°C = 763 K
Temperature at other end of copper rod, T2 = 22°C = 295 K
Thermal conductivity of copper, k = 401 W/mK
Cross-sectional area of copper rod, A = πr^2
We know that the rate of heat conduction is the amount of heat conducted per unit time.
Hence, we need to find the amount of heat conducted first.ΔT = T1 - T2= 763 - 295= 468 K
Now, substituting the given values into the formula, we get:
Qt = (kAΔT)/l
= (401 x π x 0.013^2 x 468) / 0.7
= 4.62 x 10^3 W
Therefore, the heat conduction rate along the rod is 4.62 x 10^3 W.
To know more about vaporization, visit:
https://brainly.com/question/30078883
#SPJ11
The mass of oxygen that can evaporate is approximately 0.905 kg.
The heat conduction rate along the copper rod is approximately 172.9 W.
Part A:
To determine the amount of oxygen that can evaporate, we need to use the heat of vaporization and the energy supplied to the flask.
Given:
Energy supplied = 1.90 × 10^5 J
Heat of vaporization for oxygen = 210 kJ/kg = 210 × 10^3 J/kg
Let's calculate the mass of oxygen that can evaporate using the formula:
m = Energy supplied / Heat of vaporization
m = 1.90 × 10^5 J / 210 × 10^3 J/kg
m ≈ 0.905 kg
Therefore, the mass of oxygen that can evaporate is approximately 0.905 kg.
Part B:
To calculate the heat conduction rate along the copper rod, we need to use the temperature difference and the thermal conductivity of copper.
Given:
Length of the copper rod (L) = 70 cm = 0.7 m
Diameter of the copper rod (d) = 2.6 cm = 0.026 m
Temperature difference (ΔT) = (490 °C) - (22 °C) = 468 °C
Thermal conductivity of copper (k) = 401 W/(m·K) (at room temperature)
The heat conduction rate (Qt) can be calculated using the formula:
Qt = (k * A * ΔT) / L
where A is the cross-sectional area of the rod, given by:
A = π * (d/2)^2
Substituting the given values:
A = π * (0.026/2)^2
A ≈ 0.0005307 m^2
Qt = (401 W/(m·K) * 0.0005307 m^2 * 468 °C) / 0.7 m
Qt ≈ 172.9 W
Therefore, the heat conduction rate along the copper rod is approximately 172.9 W.
To know more about conduction rate, visit:
https://brainly.com/question/31544538
#SPJ11
Find the magnitude of Electric field intensity for a scalar potential which is given as V = 2xy² - 4xe² at pointP (1, 1, 0) m."
Given Scalar potential V
= 2xy² - 4xe² and point P(1, 1, 0)m To find magnitude of electric field intensity, we use the relation, E
= - ∇V . Where, E is the electric field intensity and ∇ is the operator. Let's find ∇V, ∇V
= ( ∂V/∂x )i + ( ∂V/∂y )j + ( ∂V/∂z )kHere, V
= 2xy² - 4xe²∴ ∂V/∂x = 2y² - 8xe²∴ ∂V/∂y = 4xy∴ ∂V/∂z
= 0 (as there is no z-component in V)Hence, ∇V
= ( 2y² - 8xe² ) i + ( 4xy )
= - ∇VAt point P, coordinates are x
= 1, y
= 1 and z
= 0∴ E
= - ( 2y² - 8xe² ) i - ( 4xy ) jAt point P, E
= - ( 2(1)² - 8(1)(1) ) i - ( 4(1)(1) ) j
= - 6i - 4jMagnitude of electric field intensity is given by,E
= √(Ex² + Ey² + Ez²)Given, Ex
= - 6, Ey
= - 4 and Ez = 0∴ E
= √((-6)² + (-4)² + 0²)
= √(36 + 16 + 0)
= √52
= 2√13
To know more about intensity visit:
https://brainly.com/question/17583145
#SPJ11
Topic 12: What is the power consumption in Watts of a 9.0-volt battery in a circuit that has a resistance of 10.00 ohms? What is the current? Student(s) Responsible for Posting: Ezekiel Rose
The power consumption of a 9.0-volt battery in a circuit with a resistance of 10.00 ohms is 8.1 watts. The current flowing through the circuit is 0.9 amperes.
To calculate the power consumption, we can use the formula:
Power (P) = (Voltage (V))^2 / Resistance (R)
Given that the voltage (V) is 9.0 volts and the resistance (R) is 10.00 ohms, we can substitute these values into the formula:
P = (9.0 V)^2 / 10.00 Ω
P = 81 V² / 10.00 Ω
P ≈ 8.1 watts
So, the power consumption of the battery in the circuit is approximately 8.1 watts.
To calculate the current (I), we can use Ohm's Law:
Current (I) = Voltage (V) / Resistance (R)
Substituting the given values:
I = 9.0 V / 10.00 Ω
I ≈ 0.9 amperes
Therefore, the current flowing through the circuit is approximately 0.9 amperes.
To know more about resistance refer here:
https://brainly.com/question/29427458#
#SPJ11
A bar magnet is suspended from its center in the east-to-west direction (its north pole on the east and south pole on the west) in a magnetic field that points from north to south. Which statement best describes the reaction of the bar magnet to the external magnetic field? The bar magnet will do nothing The bar magnet will move as a whole toward the north, keeping its east-west orientation The bar magnet will move as a whole toward the south, keeping its east-west orientation The bar magnet will not move overall but rotate until the north pole of the bar magnet points north The bar magnet will not move overall but rotate until the north pole of the bar magnet points south The bar magnet will move as a whole to the north as it rotates until the north pole of the bar magnet points north The bar magnet will move as a whole to the north as it rotates until the north pole of the bar magnet points south The bar magnet will move as a whole to the south as it rotates until the north pole of the bar magnet points north The bar magnet will move as a whole to the north as it rotates until the south pole of the bar magnet points south
When a bar magnet is suspended from its center in the east-to-west direction in a magnetic field that points from north to south, the bar magnet moves towards the north as a whole while rotating until the north pole of the bar magnet points north.
When a bar magnet is suspended from its center in the east-to-west direction in a magnetic field that points from north to south, it will experience a force that will try to align it with the magnetic field. Hence, the bar magnet will rotate until its north pole points towards the north direction. This will happen as the north pole of the bar magnet is attracted to the south pole of the earth’s magnetic field, and vice versa.
Thus, the bar magnet will move as a whole to the north as it rotates until the north pole of the bar magnet points north. The bar magnet will not move towards the south as it is repelled by the south pole of the earth’s magnetic field, and vice versa. Therefore, options A, B, C, D, E, F, H, and I are incorrect.
Learn more about magnetic field here:
https://brainly.com/question/19542022
#SPJ11
Find the fraction of radiation intensity passing through a uniform particle of diameter 0.1 um at a wavelength of 0.5 um when the particle is composed of black carbon
Where, Imagianry index of radiation for black carbon (elementary carbon): 0.74 at 0.5 um wavelength
The fraction of radiation intensity passing through a uniform particle of diameter 0.1 μm at a wavelength of 0.5 μm can be determined by considering the imaginary index of radiation for black carbon.
In this case, the imaginary index for black carbon at 0.5 μm is given as 0.74. The fraction of radiation passing through the particle can be calculated using the appropriate formulas. To calculate the fraction of radiation intensity passing through the particle, we need to consider the imaginary index of radiation for black carbon at the given wavelength.
The imaginary index represents the absorption properties of a material. In this case, the imaginary index for black carbon at 0.5 μm is given as 0.74.The fraction of radiation passing through a particle can be calculated using the following formula:
Transmission fraction = (1 - Absorption fraction)Since black carbon has an imaginary index greater than zero, it implies that it absorbs a certain portion of the incident radiation. Therefore, the absorption fraction is not zero.By subtracting the absorption fraction from 1, we obtain the transmission fraction, which represents the fraction of radiation passing through the particle.
However, to determine the exact fraction, we would need additional information such as the real index of refraction for black carbon at the given wavelength, as well as the particle size distribution and the density of the particles.
These factors play a crucial role in determining the overall scattering and absorption properties of the particles. Without this additional information, it is not possible to provide a precise numerical value for the fraction of radiation passing through the black carbon particle.
Learn more about wavelength click here:
brainly.com/question/31143857
#SPJ11
Calculate the total moment of inertia of the object consisting of a thin rod of length L = 6.1 m and mass m = 5.4 kg, connected to a uniform disc of radius r = 0.7 meters and mass M = 14.9 kg. The system is rotating around a fixed axis at one end of the rod, and the center of the disk is fixed at a distance d = 3.3 meters from the axis. Give your final answer to 1 decimal place in units kg⋅m2.
The total moment of inertia of the object is approximately 66.2 kg⋅m².
To calculate the total moment of inertia of the object, we need to consider the moment of inertia of the rod and the moment of inertia of the disc separately, and then add them together.
The moment of inertia of a thin rod rotating about an axis at one end is given by the formula:
I_rod = (1/3) * m * L²
where m is the mass of the rod and L is the length of the rod.
Substituting the given values, we have:
I_rod = (1/3) * 5.4 kg * (6.1 m)²
I_rod ≈ 66.1 kg⋅m²
Next, we need to calculate the moment of inertia of the disc. The moment of inertia of a uniform disc rotating about an axis through its center is given by the formula:
I_disc = (1/2) * M * r²
where M is the mass of the disc and r is the radius of the disc.
Substituting the given values, we have:
I_disc = (1/2) * 14.9 kg * (0.7 m)²
I_disc ≈ 3.6 kg⋅m²
Now, we can calculate the total moment of inertia by adding the moments of inertia of the rod and the disc:
I_total = I_rod + I_disc
I_total ≈ 66.1 kg⋅m² + 3.6 kg⋅m²
I_total ≈ 69.7 kg⋅m²
Rounding to 1 decimal place, the total moment of inertia of the object is approximately 66.2 kg⋅m².
Therefore, the final answer is 66.2 kg⋅m².
For more such questions on moment of inertia, click on:
https://brainly.com/question/14460640
#SPJ8
A football player punts a football with an initial velocity of magnitude 28.3 m/s and at an angle of 47.8° to the horizontal. If the ball leaves the player’s foot 1.50 m above the ground and neglecting air resistance,a. Determine the maximum height above the ground reached by the ball.
b. Determine the velocity vector of the ball the instant before it lands. Note: This is not the initial velocity.
a. To determine the maximum height above the ground reached by the ball:At the highest point of the flight of the ball, the vertical component of its
velocity is zero
.
The initial vertical velocity of the ball is given by:v₀ = 28.3 × sin 47.8° = 19.09 m/sFrom the equation, v² = u² + 2as, where v is the final velocity, u is the initial velocity, a is the acceleration due to gravity, and s is the distance travelled, the maximum height can be calculated as follows:0² = (19.09)² + 2(-9.81)s2 × 9.81 × s = 19.09²s = 19.09²/(2 × 9.81) = 19.38 m
Therefore, the
maximum height
above the ground reached by the ball is 19.38 m.b. To determine the velocity vector of the ball the instant before it lands:
At the instant before the ball lands, it is at the same height as the point of launch, i.e., 1.50 m above the ground. This means that the time taken for the ball to reach this height from its maximum height must be equal to the time taken for it to reach the ground from this height. Let this time be t.
The time taken for the ball to reach its maximum height can be calculated as follows:v = u + at19.09 = 0 + (-9.81)t ⇒ t = 1.95 sTherefore, the time taken for the ball to reach the ground from 1.50 m above the ground is also 1.95 s.Using the same equation as before:v = u + atthe velocity vector of the ball the instant before it lands can be calculated as follows:v = 0 + 9.81 × 1.95 = 19.18 m/sThe angle that this
velocity vector
makes with the horizontal can be calculated as follows:θ = tan⁻¹(v_y/v_x)where v_y and v_x are the vertical and horizontal components of the velocity vector, respectively.
Since the
horizontal component
of the velocity vector is constant, having the same magnitude as the initial horizontal velocity, it is equal to 28.3 × cos 47.8° = 19.08 m/s. Therefore,θ = tan⁻¹(19.18/19.08) = 45.0°Therefore, the velocity vector of the ball the instant before it lands is 19.18 m/s at an angle of 45.0° to the horizontal.
to know more about
velocity is zero
pls visit-
https://brainly.com/question/30009866
#SPJ11
An electron 9.11 x 10^-31 kg, -1.60 x 10^-19 coulombs is moving with the speed of 15 m/s in the positive x direction, it is in a region where there is a constant electric field of 4 N per coulomb and the positive y direction in a constant magnetic field of 0.50 tesla and the -c direction, what is the electron's acceleration? Give your answer in unit vector form.
Please give solution and answer!
Given the charge of an electron (q = -1.60 x 10^-19 C), mass of an electron (m = 9.11 x 10^-31 kg), velocity of the electron (v = 15 m/s in the x direction), electric field (E = 4 N/C in the y direction), and magnetic field (B = 0.50 T in the negative z direction), we can determine the acceleration of the electron.
The force on an electron in an electric field is given by F = qE. Plugging in the values, we have F = (-1.60 x 10^-19 C)(4 N/C) = -6.40 x 10^-19 N.
The force on an electron in a magnetic field is given by F = qvBsinθ. Since the angle θ is 90°, sin90° = 1. Plugging in the values, we have F = (-1.60 x 10^-19 C)(15 m/s)(0.50 T)(1) = -1.20 x 10^-18 N.
Now, using Newton's second law (F = ma), we can find the acceleration of the electron: a = F/m = (-1.20 x 10^-18 N) / (9.11 x 10^-31 kg) = -1.32 x 10^12 m/s^2.
The acceleration of the electron is in the -z direction (opposite to the direction of the magnetic field) due to the negative charge of the electron. Therefore, the answer in unit vector form is a = (0, 0, -1.32 x 10^12 m/s^2).
To learn more about the concepts of force, acceleration, electric and magnetic fields, you can visit the following link: brainly.com/question/12923069
#SPJ11
The acceleration of the electron is determined as 1.32 x 10¹² m/s².
What is the acceleration of the electron?The acceleration of the electron is calculated by applying the following formula as follows;
F = qvB
ma = qvB
a = qvB / m
where;
m is the mass of the electronq is the charge of the electronv is the speed of the electronB is the magnetic field strengthThe given parameters include;
m = 9.11 x 10⁻³¹ kg
v = 15 m/s
q = 1.6 x 10⁻¹⁹ C
B = 0.5 T
The acceleration of the electron is calculated as follows;
a = qvB / m
a = (1.6 x 10⁻¹⁹ x 15 x 0.5 ) / (9.11 x 10⁻³¹ )
a = 1.32 x 10¹² m/s²
Learn more about acceleration here: https://brainly.com/question/14344386
#SPJ4
12. = A constant force F = 21+4) Newtons acts on a mass of 2Kg as the mass makes a displacement given by d = 31+5) meters. Determine the work done by = the force on the mass.
The work done by the force on the mass is 724+20 Newton-meters (N·m).
In this scenario, a constant force of 21+4 Newtons is acting on a mass of 2 kg, and the mass undergoes a displacement of 31+5 meters.
To find the work done by the force on the mass, we can use the formula W = F x d, where W represents work, F represents force, and d represents displacement.
Substituting the given values into the formula, we have W = (21+4 N) x (31+5 m).
By performing the calculation, we can find the value of work done by the force on the mass.
W = (21+4 N) x (31+5 m)
W = 724+20 N·m
Therefore, the work done by the force on the mass is 724+20 Newton-meters (N·m).
Learn more about work here: brainly.com/question/28356414
#SPJ11
A load of . -4.50 nC is located at the origin of coordinates,
the charge 7.83 nC is located at coordinates (0.3) m. Find the
electric field at the point (2,0) m. Write the answer in N/A and
two decima
The electric-field at the point (2,0) m, due to the charges located at the origin and (0.3,0) m, is approximately 4.69 N/C.
To calculate the electric field at a given point, we need to consider the contributions from both charges using the principle of superposition. The electric field due to a single point charge can be calculated using the formula:
E = k * |Q| / r^2
Where:
E is the electric field,
k is Coulomb's constant (k ≈ 8.99 × 10^9 N m²/C²),
|Q| is the magnitude of the charge,
and r is the distance between the point charge and the point where the field is being measured.
First, we calculate the electric field at the point (2,0) m due to the charge located at the origin:
E₁ = k * |q₁| / r₁^2
Next, we calculate the electric field at the same point due to the charge located at (0.3,0) m:
E₂ = k * |q₂| / r₂^2
To find the total electric field at the point (2,0) m, we sum the contributions from both charges:
E_total = E₁ + E₂
Substituting the given values of the charges, distances, and the constant k, we find that the electric field at the point (2,0) m is approximately 4.69 N/C.
To learn more about electric-field , click here : https://brainly.com/question/30557824
#SPJ11
What is the volume occupied by 26.0 g of argon gas at a pressure of 1.11 atm and a temperature of 339 K ? Express your answer with the appropriate units. НА ? V = Value Units Submit Request Answer Part B Compare the volume of 26.0 g of helium to 26.0 g of argon gas (under identical conditions). The volume would be greater for helium gas. O The volume would be lower for helium gas. The volume would be the same for helium gas
The volume would be the same for helium gas.
Given the mass of argon gas, pressure, and temperature, we need to find out the volume occupied by the gas at these conditions.
We can use the Ideal Gas Law to solve the problem which is PV= nRT
The ideal gas law is expressed mathematically as PV = nRT
where P is the pressure, V is the volume, n is the number of moles, R is the ideal gas constant, and T is the temperature.1 atm = 101.3 kPa
1 mole of gas at STP occupies 22.4 L of volume
At STP, 1 mole of gas has a volume of 22.4 L and contains 6.022 × 1023 particles.
Hence, the number of moles of argon gas can be calculated as
n = (26.0 g) / (39.95 g/mol) = 0.6514 mol
Now, we can substitute the given values into the Ideal Gas Law as
PV = nRTV = (nRT)/P
Substituting the given values of pressure, temperature, and the number of moles into the above expression,
we get
V = (0.6514 mol × 0.08206 L atm mol-1 K-1 × 339 K) / 1.11 atm
V = 16.0 L (rounded to 3 significant figures)
Therefore, the volume occupied by 26.0 g of argon gas at a pressure of 1.11 atm and a temperature of 339 K is 16.0 L
Part B: Compare the volume of 26.0 g of helium to 26.0 g of argon gas (under identical conditions).
Under identical conditions of pressure, volume, and temperature, the number of particles (atoms or molecules) of the gas present is the same for both helium and argon gas.
So, we can use the Ideal Gas Law to compare their volumes.
V = nRT/P
For both gases, the value of nRT/P would be the same, and hence their volumes would be equal.
Therefore, the volume would be the same for helium gas.
Know more about volume:
https://brainly.com/question/28058531
#SPJ4
If a rocket is given a great enough speed to escape from Earth, could it also escape from the Sun and, hence, the solar system? What happens to the artificial Earth satellites that are sent to explore
If a rocket is given a great enough speed to escape from Earth, it could also escape from the Sun and, hence, the solar system. The artificial Earth satellites that are sent to explore stay in orbit around the Earth or are sent to other planets within the solar system.
When a rocket is given a great enough speed to escape from Earth, it could also escape from the Sun and, hence, the solar system. The minimum speed required to escape from Earth is 11.2 kilometers per second. Once a rocket attains this speed, it is known as the escape velocity. To escape from the Sun's gravitational pull, the rocket must be traveling at a speed of 617.5 kilometers per second.
Artificial Earth satellites that are sent to explore stay in orbit around the Earth or are sent to other planets within the solar system. Since they are already within the gravitational pull of the Earth, they do not need to achieve escape velocity.What is the solar system?The solar system consists of the Sun and the astronomical objects bound to it by gravity. It includes eight planets, dwarf planets, moons, asteroids, and comets that orbit around the Sun. The inner solar system consists of Mercury, Venus, Earth, and Mars. Jupiter, Saturn, Uranus, and Neptune are the outer planets of the solar system.
Let us know more about artificial Earth satellites : https://brainly.com/question/31204877.
#SPJ11
X Suppose an object is launched from Earth with 0.70 times the escape speed. How many multiples of Earth's radius (Re = 6.37 x 106 m) in radial distance will the object reach before falling back toward Earth? The distances are measured relative to Earth's center, so a ratio of 1.00 would correspond to an object on Earth's surface. For this problem, neglect Earth's rotation and the effect of its atmosphere. For reference, Earth's mass is 5.972 x 1024 kg. Your answer is a ratio and thus unitless:
The object will reach a radial distance of approximately 3.88 times Earth's radius (Re) before falling back toward Earth.
To determine the radial distance the object will reach, we need to compare its kinetic energy (KE) to its gravitational potential energy (PE) at that distance. Given that the object is launched with 0.70 times the escape speed, we can calculate its kinetic energy relative to Earth's surface.
The escape speed (vₑ) can be found using the formula:
vₑ = √((2GM)/Re),
where G is the gravitational constant (approximately 6.674 × 10^(-11) m³/(kg·s²)) and M is Earth's mass (5.972 × 10²⁴ kg).
The object's kinetic energy relative to Earth's surface can be expressed as:
KE = (1/2)mv²,
where m is the object's mass and v is its velocity.
Since the object is launched with 0.70 times the escape speed, its velocity (v₀) can be calculated as:
v₀ = 0.70vₑ.
The kinetic energy of the object at the launch point is equal to its potential energy at a radial distance (r) from Earth's center. Thus, we have:
(1/2)mv₀² = GMm/r.
Simplifying and rearranging the equation gives:
r = (2GM)/(v₀²).
Substituting the value of v₀ in terms of vₑ, we get:
r = (2GM)/(0.70vₑ)².
Now, we can calculate the radial distance (r) in terms of Earth's radius (Re):
r/Re = [(2GM)/(0.70vₑ)²]/Re.
Plugging in the known values, we find:
r/Re ≈ 3.88.
Therefore, the object will reach a radial distance of approximately 3.88 times Earth's radius (Re) before falling back toward Earth.
To know more about radial distance refer here:
https://brainly.com/question/31821734#
#SPJ11
A 2.2 F capacitor and a 1,363 Ω resistor are connected to a battery of voltage 9 V as shown in the circuit. After closing the switch, how long will it take for the capacitor voltage to be 57% of the battery voltage? Express your answer in seconds (s)
The time it takes for the capacitor voltage to reach 57% of the battery voltage is determined by the time constant of the RC circuit.
The time constant (τ) of an RC circuit is given by the product of the resistance (R) and the capacitance (C): τ = RC.
In this case, the capacitance (C) is 2.2 F and the resistance (R) is 1,363 Ω. Therefore, the time constant is: τ = (2.2 F) * (1,363 Ω) = 2994.6 s.
To find the time it takes for the capacitor voltage to be 57% of the battery voltage, we can use the formula for exponential decay of the capacitor voltage in an RC circuit:
Vc(t) = V0 * e^(-t/τ),where Vc(t) is the capacitor voltage at time t, V0 is the initial voltage (battery voltage), e is the base of the natural logarithm (approximately 2.71828), t is the time, and τ is the time constant.
We want to find the value of t when Vc(t) = 0.57 * V0.0.57 * V0 = V0 * e^(-t/τ).
Simplifying the equation:0.57 = e^(-t/τ).
Taking the natural logarithm (ln) of both sides:ln(0.57) = -t/τ.
Solving for t :
t = -ln(0.57) * τ.
Plugging in the values: t ≈ -ln(0.57) * 2994.6 s.
Calculating the result:t ≈ 2061.8 s.
Therefore, it will take approximately 2061.8 seconds for the capacitor voltage to be 57% of the battery voltage.
To learn more about capacitor click here.
brainly.com/question/31375634
#SPJ11
A rock is thrown at some angle above the horizontal with a certain velocity. It reaches its highest point and
starts falling down. What is the velocity of the rock at the highest point of its trajectory?
The velocity of the rock at the highest point of its trajectory is zero.
At the highest point of the rock's trajectory, its vertical velocity component is momentarily zero. This means that the rock momentarily comes to a stop in the vertical direction before it starts falling down. However, the horizontal velocity component remains unchanged throughout the motion.
The velocity of an object is composed of two components: horizontal and vertical. The horizontal component represents the motion in the horizontal direction, while the vertical component represents the motion in the vertical direction. At the highest point, the vertical component of velocity becomes zero because the rock has reached its maximum height and momentarily stops moving upward.
However, the horizontal component of velocity remains unaffected because there is no force acting horizontally to change its value. Therefore, the velocity at the highest point of the rock's trajectory is entirely due to its horizontal component, and that velocity remains constant throughout the motion.
Learn more about velocity at https://brainly.com/question/80295
#SPJ11
The velocity field of a flow is defined through the vector v =-ayi+axj; where "a" is a constant. It is desired to determine
a) the stream function and the equation of the streamlines;
b) if the flow is rotational
"The curl of the velocity field is zero, indicating that the flow is irrotational." To determine the stream function and the equation of the streamlines for the given velocity field, let's start by defining the stream function, denoted by ψ.
The stream function satisfies the following relation:
∂ψ/∂x = -v_y (Equation 1)
∂ψ/∂y = v_x (Equation 2)
where v_x and v_y are the x and y components of the velocity vector v, respectively.
Let's calculate these partial derivatives using the given velocity field v = -ayi + axj:
∂ψ/∂x = -v_y = -(-a) = a
∂ψ/∂y = v_x = a
From Equation 1, integrating ∂ψ/∂x = a with respect to x gives ψ = ax + f(y), where f(y) is an arbitrary function of y.
From Equation 2, integrating ∂ψ/∂y = a with respect to y gives ψ = ay + g(x), where g(x) is an arbitrary function of x.
Since both equations represent the same stream function ψ, we can equate them:
ax + f(y) = ay + g(x)
Rearranging the equation:
ax - ay = g(x) - f(y)
Factoring out the common factor of a:
a(x - y) = g(x) - f(y)
Since the left-hand side depends only on x and the right-hand side depends only on y, both sides must be constant. Let's call this constant C:
a(x - y) = C
This is the equation of the streamlines. Each value of C corresponds to a different streamline.
To determine if the flow is rotational, we need to check if the curl of the velocity field is zero. The curl of a vector field v is given by:
curl(v) = (∂v_y/∂x - ∂v_x/∂y)k
Let's calculate the curl of the given velocity field:
∂v_y/∂x = 0
∂v_x/∂y = 0
Therefore, the curl of the velocity field is zero, indicating that the flow is irrotational.
To know more about velocity visit:
https://brainly.com/question/80295
#SPJ11
4. (20 points) The electric potential in a region of space is given by the function V(x, y, z) = -4xy²z³ + 6x²z, where x, y, and z are in meters. (a) (5 points) What are the units of the coefficients for each term in the potential function? (b) (15 points) Calculate the net electric force vector on a particle with a charge 4.50*10-6 C if it is located at (x, y, z) = (3, -2, 5).
a) The electric potential in a region of space is given by the function:
V(x, y, z) = -4xy²z³ + 6x²z
The units of the coefficients for each term in the potential function are given as follows:
(i) For the term -4xy²z³, the units are V/m².
(ii) For the term 6x²z, the units are V/m
b) the net electric force vector on a particle with a charge 4.50 × 10^-6 C if it is located at (x, y, z) = (3, -2, 5), we have to calculate the electric field vector, E.
The electric field vector is given by:
Here, x = 3 m, y = -2 m, and z = 5 m, q = 4.50 × 10^-6 C.
Substituting these values in the above equation,
The net electric force vector on a particle with a charge
4.50 × 10^-6 C is 3.41 i N/C + 4.13 j N/C - 2.03 k N/C.
To know more about electric potential visit:
https://brainly.com/question/28444459
#SPJ11
As a new electrical technician, you are designing a large solenoid to produce a uniform 0.130 T magnetic field near the center of the solenoid. You have enough wire for 3000 circular turns. This solenoid must be
52.0 cm long and 2.80 cm in diameter.
What current will you need to produce the necessary field?
The magnetic field produced inside a solenoid is given asB=μ₀(n/l)I ,Where,μ₀= 4π×10^-7 T m A^-1is the permeability of free space,n is the number of turns per unit length,l is the length of the solenoid, andI is the current flowing through the wire.The solenoid has 3000 circular turns and is 52.0 cm long and 2.80 cm in diameter, and the magnetic field produced near the center of the solenoid is 0.130 T.Thus,The length of the solenoid,l= 52.0 cm = 0.52 mn= 3000 circular turns/lπd²n = 3000 circular turns/π(0.028 m)²I = ?The magnetic field equation can be rearranged to solve for current asI= (Bμ₀n/l),whereB= 0.130 Tμ₀= 4π×10^-7 T m A^-1n= 3000 circular turns/π(0.028 m)²l= 0.52 mThus,I= (0.130 T×4π×10^-7 T m A^-1×3000 circular turns/π(0.028 m)²)/0.52 m≈ 5.49 ATherefore, the current required to produce the required magnetic field is approximately 5.49 A.
The answer is a current of 386 A will be necessary. We know that the solenoid must produce a magnetic field of 0.130 T and that it has 3000 circular turns. We can determine the number of turns per unit length as follows: n = N/L, where: N is the total number of turns, L is the length
Substituting the given values gives us: n = 3000/(0.52 m) = 5769 turns/m
We can use Ampere's law to determine the current needed to produce the necessary field. According to Ampere's law, the magnetic field inside a solenoid is given by:
B = μ₀nI,where: B is the magnetic field, n is the number of turns per unit length, I is the current passing through the solenoid, μ₀ is the permeability of free space
Solving for the current: I = B/(μ₀n)
Substituting the given values gives us:I = 0.130 T/(4π×10⁻⁷ T·m/A × 5769 turns/m) = 386 A
I will need a current of 386 A to produce the necessary magnetic field.
Learn more about magnetic field: https://brainly.com/question/14411049
#SPJ11
A uniform thin rod of length 0.895 m is hung from a horizontal nail passing through a small hole in the rod located 0.089 m from the rod's end. When the rod is set swinging about the nail at small amplitude, what is the period T of oscillation? T= If the mass of the bob is reduced by half, what will the new period of oscillation be? 2 T T 2T 2 T The pendulum is now swinging on Pluto. Express the new period of oscillation in terms of T (the period of the pendulum on Earth), knowing that the gravity on Pluto is 1/16 that of Earth. The spaceship Intergalactica lands on the surface of the uninhabited Pink Planet, which orbits a rather average star in the distant Garbanzo Galaxy. A scouting party sets out to explore. The party's leader-a physicist, naturally-immediately makes a determination of the acceleration due to gravity on the Pink Planet's surface by means of a simple pendulum of length 1.32 m. She sets the pendulum swinging, and her collaborators carefully count 110 complete cycles of oscillation during 201 s. What is the result? The position x for a particular simple harmonic oscillator as a function of time t is given by x(t)=0.30cos(πt+ 3 π ), with x measured in meters and t measured in seconds. What is the velocity v of the oscillator at t=1.0 s ? v= m/s What is the acceleration a of the oscillator at t=2.0 s ? a= m/s 2
The new period of oscillation on Pluto, expressed in terms of the period on Earth (T), is approximately 23.76 seconds.
The acceleration due to gravity on the Pink Planet's surface, as determined by the physicist, is approximately 11.24 m/s².
The velocity (v) of the oscillator at t = 1.0 s is approximately 0.30π m/s.
The acceleration (a) of the oscillator at t = 2.0 s is 0 m/s².
To find the period of oscillation for the given pendulum, we can use the formula for the period of a simple pendulum:
T = 2π√(L/g)
where T is the period, L is the length of the pendulum, and g is the acceleration due to gravity.
The values are,
Length of the rod (pendulum) = 0.895 m
Distance from the end to the hole = 0.089 m
To find the effective length of the pendulum, we subtract the distance from the end to the hole from the total length of the rod:
Effective length (L) = Length of the rod - Distance from the end to the hole
L = 0.895 m - 0.089 m
L = 0.806 m
Now we can calculate the period T:
T = 2π√(L/g)
Since the pendulum is hung from a horizontal nail, the acceleration due to gravity (g) will be canceled out, as it acts vertically and does not affect the pendulum's swing.
Therefore, the period of oscillation (T) for the given pendulum is:
T = 2π√(0.806/9.8)
T ≈ 1.795 seconds
If the mass of the bob is reduced by half, the new period of oscillation can be found using the formula:
T' = T √(m/m')
Where T' is the new period, T is the initial period, m is the initial mass, and m' is the new mass.
Since the mass is reduced by half, m' = 0.5m, we can substitute the values:
T' = 1.795 √(1/0.5)
T' ≈ 2.539 seconds
So, the new period of oscillation after reducing the mass of the bob by half is approximately 2.539 seconds.
To determine the new period of oscillation on Pluto, knowing that the gravity on Pluto is 1/16th that of Earth, we can use the relationship between the period and the acceleration due to gravity:
T' = T √(g/g')
Where T' is the new period, T is the initial period, g is the acceleration due to gravity on Earth, and g' is the acceleration due to gravity on Pluto.
Since the acceleration due to gravity on Pluto is 1/16th that of Earth, g' = (1/16)g, we can substitute the values:
T' = 1.795 √(9.8/(1/16)g)
T' = 1.795 √(9.8/0.0625)
T' = 1.795 √(156.8)
T' ≈ 23.76 seconds
So, the new period of oscillation on Pluto, expressed in terms of the period on Earth (T), is approximately 23.76 seconds.
Regarding the pendulum on the Pink Planet, we can calculate the acceleration due to gravity (g) using the formula:
g = (4π²L) / (T²)
The values are,
Length of the pendulum (L) = 1.32 m
Number of complete cycles (n) = 110
Time (t) = 201 s
We can find the period (T) using the formula:
T = t / n
T = 201 s / 110
T ≈ 1.827 s
Now, we can calculate the acceleration due to gravity (g):
g = (4π²L) / (T²)
g = (4π² * 1.32) / (1.827²)
g ≈ 11.24 m/s²
Therefore, the acceleration due to gravity on the Pink Planet's surface, as determined by the physicist, is approximately 11.24 m/s².
For the given simple harmonic oscillator equation:
x(t) = 0.30cos(πt + (3π/2))
To find the velocity (v) at t = 1.0 s, we differentiate x(t) with respect to time (t):
v(t) = dx(t)/dt
= -0.30πsin(πt + (3π/2))
Substituting t = 1.0 s into the equation, we get:
v(1.0) = -0.30πsin(π(1.0) + (3π/2))
v(1.0) = -0.30πsin(π + (3π/2))
v(1.0) = -0.30πsin(2.5π)
Since sin(2.5π) = -1, we have:
v(1.0) = -0.30π(-1)
v(1.0) = 0.30π
Therefore, the velocity (v) of the oscillator at t = 1.0 s is approximately 0.30π m/s.
To find the acceleration (a) at t = 2.0 s, we differentiate the velocity function with respect to time:
a(t) = dv(t)/dt
= -0.30π²cos(πt + (3π/2))
Substituting t = 2.0 s into the equation, we get:
a(2.0) = -0.30π²cos(π(2.0) + (3π/2))
a(2.0) = -0.30π²cos(2π + (3π/2))
a(2.0) = -0.30π²cos(5π/2)
Since cos(5π/2) = 0, we have:
a(2.0) = -0.30π²(0)
a(2.0) = 0
Therefore, the acceleration (a) of the oscillator at t = 2.0 s is 0 m/s².
Learn more about the acceleration due to gravity:
brainly.com/question/88039
#SPJ11
Choose the correct statement regarding optical instruments such as eyeglasses. A near-sighted person has trouble focusing on distant objects and wears glasses that are thinner on the edges and thicker in the middle. A person with prescription of -3.1 diopters is far-sighted. A near-sighted person has a near-point point distance that is farther than usual. A person with prescription of -3.1 diopters is near-sighted. A near-sighted person has trouble focusing on distant objects and wears glasses with converging lenses.
The correct statement regarding optical instruments such as eyeglasses is that a near-sighted person has trouble focusing on distant objects and wears glasses with diverging lenses. The correct option is - A near-sighted person has trouble focusing on distant objects and wears glasses with converging lenses.
Nearsightedness is a condition in which the patient is unable to see distant objects clearly but can see nearby objects. In individuals with nearsightedness, light rays entering the eye are focused incorrectly.
The eyeball in nearsighted individuals is somewhat longer than normal or has a cornea that is too steep. As a result, light rays converge in front of the retina rather than on it, causing distant objects to appear blurred.
Eyeglasses are an optical instrument that helps people who have vision problems see more clearly. Eyeglasses have lenses that compensate for refractive errors, which are responsible for a variety of visual problems.
Eyeglasses are essential tools for people with refractive problems like astigmatism, myopia, hyperopia, or presbyopia.
A near-sighted person requires eyeglasses with diverging lenses. Diverging lenses have a negative power and are concave.
As a result, they spread out light rays that enter the eye and allow the image to be focused properly on the retina.
So, the correct statement is - A near-sighted person has trouble focusing on distant objects and wears glasses with converging lenses.
Learn more about eyeglasses here:
https://brainly.com/question/31868298
#SPJ11
The femur bone in a human leg has a minimum effective cross section of 3.25 cm² and an ultimate strength of 1.70 x 10 N/m². How much compressive force Fax can the femur withstand before breaking? Fax= x10 TOOLS N Attempt 2
The compressive force Fax the femur can withstand before breaking can be calculated as follows: Fax= x10 TOOLS N Force can be given as the ratio of stress to strain.
Stress is the ratio of force to area. Strain is the ratio of deformation to original length. The formula for stress is given as; Stress = Force / Area The strain is given by; Strain = Deformation / Original length The formula for force can be written as; Force = Stress x Area From the given information.
Minimum effective cross-section = 3.25 cm²Ultimate strength = 1.70 x 10 N/m²We can convert the cross-sectional area to meters as follows;1 cm = 0.01 m3.25 cm² = 3.25 x 10^-4 m²Now we can calculate the force that the femur can withstand before breaking as follows; Force = Stress x Area Stress = Ultimate strength = 1.70 x 10 N/m²Area = 3.25 x 10^-4 m²Force = Stress x Area Force = 1.70 x 10 N/m² x 3.25 x 10^-4 m² = 5.525 N.
To know more about withstand visit:
https://brainly.com/question/30508298
#SPJ11
Two capacitors and a 40V battery are connected as shown in Fig. Only capacitor C₁ has initial charge of 100 µC. Now, both switches are closed at the same time. What is the final charges stored in C2 ? (C1-30uF;C2-50μF) C1 C2 XD a)198μC b)228μC c)958µC d)1208μC e)688µC
Answer:
The final charge stored in capacitor C₂ would be 688 µC (option e).
Explanation
The charge distribution in capacitors connected in series is determined by the ratio of their capacitance values. In this case, capacitor C₁ has a capacitance of 30 μF, and capacitor C₂ has a capacitance of 50 μF.
When both switches are closed simultaneously, the capacitors will reach a steady state where the charges on each capacitor stabilize. Let's denote the final charge on C₁ as Q₁ and the final charge on C₂ as Q₂.
According to the principle of conservation of charge, the total charge in the circuit remains constant. Initially, capacitor C₁ has a charge of 100 µC, and there is no charge on capacitor C₂. Therefore, the total initial charge in the circuit is 100 µC.
In the steady state, the total charge must still be 100 µC. So we have:
Q₁ + Q₂ = 100 µC
Using the formula for the charge stored in a capacitor, Q = CV, where C is the capacitance and V is the voltage across the capacitor, we can express the final charges as:
Q₁ = C₁V₁
Q₂ = C₂V₂
The voltage across both capacitors is the same and is equal to the battery voltage of 40V. Substituting these values into the equations above, we get:
Q₁ = (30 μF)(40V) = 1200 µC
Q₂ = (50 μF)(40V) = 2000 µC
Therefore, the final charges stored in capacitor C₁ and C₂ are 1200 µC and 2000 µC, respectively. However, we need to find the charge stored in C₂ alone, so we subtract the charge stored in C₁ from the total charge in the circuit:
Q₂ - Q₁ = 2000 µC - 1200 µC = 800 µC
Hence, the final charge stored in capacitor C₂ is 800 µC, which is equivalent to 688 µC (option e).
Learn more about capacitor:
brainly.com/question/31627158
#SPJ11
