Question 2 [10] Give the following grouped data: Intervals frequency [50-58) 3 [58-66) 7 [66-74) 12 [74-82) 0 [82-90) 2 [90-98) 6 2.1 Use the data above to calculate the mean 2.2 What is the first qua

Answers

Answer 1

The mean of the given grouped data is 68.3.

To calculate the mean, we need to find the midpoint of each interval and multiply it by its corresponding frequency. Then, we sum up the products and divide by the total number of observations.

The midpoint of each interval can be calculated by taking the average of the lower and upper bounds. For example, for the interval [50-58), the midpoint is (50 + 58) / 2 = 54.

Next, we multiply each midpoint by its corresponding frequency and sum up the products. For the given data:

(54 * 3) + (62 * 7) + (70 * 12) + (78 * 0) + (86 * 2) + (94 * 6) = 162 + 434 + 840 + 0 + 172 + 564 = 2172.

Finally, we divide the sum by the total number of observations, which is the sum of all the frequencies: 3 + 7 + 12 + 0 + 2 + 6 = 30.

Mean = 2172 / 30 = 72.4.

Therefore, the mean of the given grouped data is approximately 72.4.

2.2 The first quartile cannot be determined with the given grouped data.

The first quartile, denoted as Q1, represents the value below which 25% of the data falls. In order to calculate the first quartile, we need to know the individual data points within each interval. However, the grouped data only provides information about the frequency within each interval, not the individual data points.

Without the specific data points, we cannot determine the position of the first quartile within the intervals. Therefore, it is not possible to calculate the first quartile using the given grouped data.

To know more about quartiles, refer here:

https://brainly.com/question/24329548#

#SPJ11


Related Questions

Question 14 2 Construct a scatter plot and decide if there appears to be a positive correlation, negative correlation, or no correlation. X Y X Y 30 43 750 18 180 37 790 18 520 29 950 11 630 17 960 15

Answers

The data given to construct a scatter plot is shown below: XY 30 43 750 18 180 37 790 18 520 29 950 11 630 17 960 15 The scatter plot for the given data is shown below: In the given scatter plot, it is observed that the data points have an increasing trend from left to right.

Hence, there is a positive correlation between the variables X and Y. When the values of one variable increase with the increase in the values of the other variable, it is a positive correlation. Hence, in the given data, there is a positive correlation between the variables X and Y. The scatter plot can be used to study the nature of the correlation between two variables. The nature of correlation between variables can be either positive, negative, or no correlation.

If the values of one variable increase with the increase in the values of the other variable, then it is a positive correlation. If the values of one variable decrease with the increase in the values of the other variable, then it is a negative correlation. If there is no change in the values of one variable with the increase in the values of the other variable, then there is no correlation.

To know more about data visit:

https://brainly.com/question/10980404

#SPJ11

the number of rabbits in elkgrove doubles every month. there are 20 rabbits present initially.

Answers

There will be 160 rabbits after three months And so on. So, we have used the exponential growth formula to find the number of rabbits in Elkgrove. After one month, there will be 40 rabbits.

Given that the number of rabbits in Elkgrove doubles every month and there are 20 rabbits present initially. In order to determine the number of rabbits in Elkgrove, we need to use an exponential growth formula which is given byA = P(1 + r)ⁿ where A is the final amount P is the initial amount r is the growth rate n is the number of time periods .

Let the number of months be n. If the number of rabbits doubles every month, then the growth rate (r) = 2. Therefore, the formula becomes A = 20(1 + 2)ⁿ.

Simplifying this expression, we get A = 20(2)ⁿA = 20 x 2ⁿTo find the number of rabbits after one month, substitute n = 1.A = 20 x 2¹A = 20 x 2A = 40 .

Therefore, there will be 40 rabbits after one month.To find the number of rabbits after two months, substitute n = 2.A = 20 x 2²A = 20 x 4A = 80Therefore, there will be 80 rabbits after two months.

To find the number of rabbits after three months, substitute n = 3.A = 20 x 2³A = 20 x 8A = 160. Therefore, there will be 160 rabbits after three months And so on. So, we have used the exponential growth formula to find the number of rabbits in Elkgrove. After one month, there will be 40 rabbits.

After two months, there will be 80 rabbits. After three months, there will be 160 rabbits. The number of rabbits will continue to double every month and we can keep calculating the number of rabbits using this formula.

To know more about Exponential  visit :

https://brainly.com/question/29160729

#SPJ11

1) calculate the volume of the air inside the garage in cm3. the area of the garage floor covers a rectangle of 8 m by 8 m and its height is 3 m.

Answers

To calculate the volume of the air inside the garage, we need to multiply the area of the garage floor by its height.

First, let's convert the dimensions from meters to centimeters:

Length of the garage floor = 8 m = 800 cm

Width of the garage floor = 8 m = 800 cm

Height of the garage = 3 m = 300 cm

Now, we can calculate the volume:

Volume = Length × Width × Height

      = 800 cm × 800 cm × 300 cm

      = 192,000,000 cm³

Therefore, the volume of the air inside the garage is 192,000,000 cm³.

To know more about volume visit-

brainly.com/question/9268777

#SPJ11

find the volume of the solid whose base is bounded by the circle x^2 y^2=4

Answers

the volume of the solid whose base is bounded by the circle x²y² = 4 is 0.

The equation of a circle in the coordinate plane can be written as(x - a)² + (y - b)² = r², where the center of the circle is (a, b) and the radius is r.

The equation x²y² = 4 can be rewritten as:y² = 4/x².

Therefore, the graph of x²y² = 4 is the graph of the following two functions:

y = 2/x and y = -2/x.

The line connecting the points where y = 2/x and y = -2/x is the x-axis.

We can use the washer method to find the volume of the solid obtained by rotating the area bounded by the graph of y = 2/x, y = -2/x, and the x-axis around the x-axis.

The volume of the solid is given by the integral ∫(from -2 to 2) π(2/x)² - π(2/x)² dx

= ∫(from -2 to 2) 4π/x² dx

= 4π∫(from -2 to 2) x⁻² dx

= 4π[(-x⁻¹)/1] (from -2 to 2)

= 4π(-0.5 + 0.5)

= 4π(0)

= 0.

Therefore, the volume of the solid whose base is bounded by the circle x²y² = 4 is 0.

To know more about coordinate visit:

https://brainly.com/question/22261383

#SPJ11

Suppose x is a random variable best described by a uniform
probability that ranges from 2 to 5. Compute the following: (a) the
probability density function f(x)= 1/3 (b) the mean μ= 7/2 (c) the
stand

Answers

The A) probability density function is 1/3, B) the mean is 7/2 and C) the standard deviation is √3/2.

Given, x is a random variable best described by a uniform probability that ranges from 2 to 5.P(x) = 1 / (5-2) = 1/3(a) The probability density function f(x) = 1/3(b)

Mean of the probability distribution is given by the formula μ = (a+b)/2, where a is the lower limit of the uniform distribution and b is the upper limit of the uniform distribution.

The lower limit of the uniform distribution is 2 and the upper limit is 5.μ = (2+5)/2=7/2

(c) The standard deviation of a uniform distribution can be found using the following formula: σ=√[(b−a)^2/12]Here, a = 2 and b = 5.σ=√[(5−2)^2/12]= √(9/12)= √(3/4)= √3/2Hence, the answers are given below:

(a) Probability density function f(x) = 1/3(b) Mean of the probability distribution is given by the formula μ = (a+b)/2, where a is the lower limit of the uniform distribution and b is the upper limit of the uniform distribution.

The lower limit of the uniform distribution is 2 and the upper limit is 5.μ = (2+5)/2=7/2

(c) The standard deviation of a uniform distribution can be found using the following formula: σ=√[(b−a)^2/12]Here, a = 2 and b = 5.σ=√[(5−2)^2/12]= √(9/12)= √(3/4)= √3/2

Therefore, the probability density function is 1/3, the mean is 7/2 and the standard deviation is √3/2.

Know more about probability density function here,

https://brainly.com/question/31039386

#SPJ11

The newly proposed city park is rectangle shaped. Blake drew a scale drawing of the park and used a scale of 1 cm: 20 ft
1) If the width on the scale drawing of the city park is 25 centimeters, what is the actual width of the park?
A) 250 feet
B) 400 feet
C)500 feet
D)750 feet

Answers

Cross-multiplying, we have:1 x = 20 × 25x = 500Therefore, the actual width of the park is 500 feet, which is option C.

The newly proposed city park is rectangle shaped. Blake drew a scale drawing of the park and used a scale of 1 cm: 20 ft.

If the width on the scale drawing of the city park is 25 centimeters, what is the actual width of the park?

If the scale used is 1 cm: 20 ft, it means that 1 cm on the scale drawing represents 20 feet in the actual park.

Using proportions, the width of the park can be calculated as follows:1 cm : 20 ft = 25 cm : x f

twhere x is the actual width of the park.

because it includes an explanation of how to calculate the actual width of the park using proportions and cross-multiplication.

To know more about width visit:

https://brainly.com/question/30282058

#SPJ11

Find the perimeter of a rectangle in simplest expression form that has an area of 6x^2 +17x + 12 square feet.

Answers

perimeter = 2(length + width)We can substitute the values we found for l and w to get: perimeter = 2(3x + 4 + 2x + 3)perimeter = 2(5x + 7)perimeter = 10x + 14Therefore, the perimeter of the rectangle is 10x + 14.

We have an area of a rectangle that is 6x² + 17x + 12 square feet and we need to find the perimeter of this rectangle. First, we will write down the formula of the area of a rectangle in terms of its length and width: Area of rectangle = length × width A rectangle has two pairs of equal sides. If we let the length be a and the width be b, we can say that:2a + 2b = perimeter We want to find the perimeter, so we need to find a and b by factoring the area expression. Factoring 6x² + 17x + 12:6x² + 8x + 9x + 12 = (3x + 4)(2x + 3)Therefore, the length and width of the rectangle are 3x + 4 and 2x + 3, respectively. The perimeter of a rectangle with length l and width w is given by the expression :perimeter = 2(l + w)We can substitute the values we found for l and w to get: perimeter = 2(3x + 4 + 2x + 3)perimeter = 2(5x + 7)perimeter = 10x + 14Therefore, the perimeter of the rectangle is 10x + 14.

To know more about rectangle Visit:

https://brainly.com/question/12019874

#SPJ11

which statements explain that the table does not represent a prbability distribution
A. The probability 4/3 is greater than 1.
B. The probabilities have different denominators.
C. The results are all less than 0.
D. The sum of the probabilities is 8/3 .

Answers

The sum of the probabilities is not equal to one, the table does not represent a probability distribution, so option D is the correct answer.

The statement that explains that the table does not represent a probability distribution is D. The sum of the probabilities is 8/3.

This statement explains that the probabilities do not add up to one, which is a requirement for a probability distribution. Therefore, it is not a probability distribution. If a table is given with probabilities and it is required to identify whether it represents a probability distribution or not, we must check the probabilities whether they meet the following conditions or not.

The sum of all probabilities should be equal to 1.All probabilities should be greater than or equal to zero.If any probability is greater than 1, then it is not a probability, so the probability table does not represent a probability distribution.The given probabilities have different denominators, this condition alone is not enough to reject it as probability distribution and is also a common error while creating the probability table.

An event's probability is a numerical value that reflects how likely it is to occur. Probabilities are always between zero and one, with zero indicating that the event is impossible and one indicating that the event is certain.

The sum of the probabilities of all possible outcomes for a particular experiment is always equal to one.The probabilities in the table represent the likelihood of the event happening and must add up to 1.

For example, the probability of rolling a die and getting a 1 is 1/6 because there are six possible outcomes and only one of them is a 1.The probability distribution can be used to determine the likelihood of certain outcomes. The sum of all probabilities must be equal to one.

The probability distribution function is also used in statistics to calculate the mean, variance, and standard deviation of a random variable. A probability distribution that meets the required conditions is called a discrete probability distribution. It is a distribution where the probability of each outcome is defined for discrete values.

To know more about probabilities visit:

https://brainly.com/question/32004014

#SPJ11

Find all!! solutions of the given equation. (Enter your answers as a comma-separated list. Let k be any integer. Round terms to two decimal places where appropriate.)

a) sin(theta) + 1 = 0
b) cos(theta) = 0.44
c) 9 sin(theta) − 1 = 0

Answers

a) There is no solution for the given equation and b) The solution of the given equation is 2πk - 1.13, 1.13 + 2πk and c) There is no solution for the given equation.

a) Given equation is sin(theta) + 1 = 0.

It is given that sin(theta) + 1 = 0

sin(theta) = -1

Here, we know that the value of sin(theta) is between -1 and 1.

So, there is no solution for the given equation.

b) Given equation is cos(theta) = 0.44.

Here, we know that the value of cos(theta) is between -1 and 1. Also, we can use the inverse cosine function to solve for theta.

cos(theta) = 0.44

cos⁻¹(cos(theta)) = cos⁻¹(0.44)

θ = 1.13 + 2πk, 2πk - 1.13 for all k ∈ Z. (using calculator)

Thus, the solution of the given equation is 2πk - 1.13, 1.13 + 2πk.

c) Given equation is 9sin(theta) - 1 = 0.

9sin(theta) = 1

Here, we know that the value of sin(theta) is between -1 and 1.

So, there is no solution for the given equation.

To know more about equation visit:

https://brainly.com/question/29657983

#SPJ11

For any positive integer n, let An​ denote the surface area of the unit ball in Rn, and let Vn​ denote the volume of the unit ball in Rn. Let i be the positive integer such that Ai​>Ak​ for all k k not equal to i. Similarly let j be the positive integer such that Vj​>Vk​ for all k not equal to j. Find j−i.

Answers

To find the value of j - i, we need to determine the relationship between the surface areas (An) and volumes (Vn) of the unit ball in Rn for different positive integers n.

For the unit ball in Rn, the formula for surface area (An) and volume (Vn) are given by:

An = (2 * π^(n/2)) / Γ(n/2)

Vn = (π^(n/2)) / Γ((n/2) + 1)

where Γ denotes the gamma function.

To find the value of j - i, we need to identify the positive integers i and j such that Ai > Ak for all k not equal to i, and Vj > Vk for all k not equal to j.

First, let's analyze the relationship between An and Vn. By comparing the formulas, we can see that:

An / Vn = [(2 * π^(n/2)) / Γ(n/2)] / [(π^(n/2)) / Γ((n/2) + 1)]

      = 2 / [n * (n-1)]

From this equation, we can deduce that An / Vn > 1 if and only if 2 > n * (n-1).

To find the positive integer i, we need to identify the highest positive integer n for which 2 > n * (n-1) holds true. We can observe that this condition is satisfied for n = 2. Therefore, i = 2.

Now, let's find the positive integer j. We need to identify the lowest positive integer n for which 2 > n * (n-1) does not hold true. We can observe that this condition is no longer satisfied for n = 3. Therefore, j = 3.

Finally, we can calculate j - i as follows:

j - i = 3 - 2 = 1

Therefore, j - i equals 1.

To know more about integer visit-

brainly.com/question/32066988

#SPJ11

Please check within the next 20 minutes, Thanks!
Use the given minimum and maximum data entries, and the number of classes, to find the class width, the lower class limits, and the upper class limits. minimum = 21, maximum 122, 8 classes The class w

Answers

For a given minimum of 21, maximum of 122, and eight classes, the class width is approximately 13. The lower class limits are 21-33, 34-46, 47-59, 60-72, 73-85, 86-98, 99-111, and 112-124. The upper class limits are 33, 46, 59, 72, 85, 98, 111, and 124.

To find the class width, we need to subtract the minimum value from the maximum value and divide it by the number of classes.

Class width = (maximum - minimum) / number of classes

Class width = (122 - 21) / 8

Class width = 101 / 8

Class width = 12.625

We round up the class width to 13 to make it easier to work with.

Next, we need to determine the lower class limits for each class. We start with the minimum value and add the class width repeatedly until we have all the lower class limits.

Lower class limits:

Class 1: 21-33

Class 2: 34-46

Class 3: 47-59

Class 4: 60-72

Class 5: 73-85

Class 6: 86-98

Class 7: 99-111

Class 8: 112-124

Finally, we can find the upper class limits by adding the class width to each lower class limit and subtracting one.

Upper class limits:

Class 1: 33

Class 2: 46

Class 3: 59

Class 4: 72

Class 5: 85

Class 6: 98

Class 7: 111

Class 8: 124

To know more about lower class limits refer here:

https://brainly.com/question/31059294#

#SPJ11

Can someone please explain to me why this statement is
false?
As how muhammedsabah would explain this question:
However, I've decided to post a separate question hoping to get
a different response t
c) For any positive value z, it is always true that P(Z > z) > P(T > z), where Z~ N(0,1), and T ~ Taf, for some finite df value. (1 mark)
c) Both normal and t distribution have a symmetric distributi

Answers

Thus, if we choose z to be a negative value instead of a positive value, then we would get the opposite inequality.

The statement "For any positive value z, it is always true that P(Z > z) > P(T > z), where Z~ N(0,1), and T ~ Taf, for some finite df value" is false. This is because both normal and t distributions have a symmetric distribution.

Explanation: Let Z be a random variable that has a standard normal distribution, i.e. Z ~ N(0, 1). Then we have, P(Z > z) = 1 - P(Z < z) = 1 - Φ(z), where Φ is the cumulative distribution function (cdf) of the standard normal distribution. Similarly, let T be a random variable that has a t distribution with n degrees of freedom, i.e. T ~ T(n).Then we have, P(T > z) = 1 - P(T ≤ z) = 1 - F(z), where F is the cdf of the t distribution with n degrees of freedom. The statement "P(Z > z) > P(T > z)" is equivalent to Φ(z) < F(z), for any positive value of z. However, this is not always true. Therefore, the statement is false. The reason for this is that both normal and t distributions have a symmetric distribution. The standard normal distribution is symmetric about the mean of 0, and the t distribution with n degrees of freedom is symmetric about its mean of 0 when n > 1.

Know more about normal distribution here:

https://brainly.com/question/15103234

#SPJ11

A highly rated community college has over 60,000 students and seven different campuses. One of its highest density classes offered is Introduction to Statistics. The statistics course is required for nearly every major offered at the college and therefore is considered a strategic course for the college. The college's leadership is very interested in the relationship between the class size of its statistics courses and students' final grades for the course. Specifically, the college is concerned with the low pass rate of some of its class sections and is determined to remedy the situation. The college's institutional research department recently collected data for analysis in order to support leadership's upcoming discussion regarding the low pass rate of some of its statistics class sections. Final grades from a random sample of 300 class sections over the last five years were collected. The research division also conducted analysis, using archived data, to determine the class size of these 300 class sections. The Class Number, Campus, Class Size, Average Final Grade, Number of "F"s, Average G.P.A. and Successful/Unsuccessful data were collected for these 300 class sections. StatCrunch Data Set Assume that the distribution of Average G.P.A. for all of the college's Introduction to Statistics class sections over the past five years has the same shape, mean, and standard deviation as the Average G.P.A. data. If it is reasonable based on your visual analysis of a histogram of the Average G.P.A. data, use the sample mean (2.66) and sample standard deviation (0.23) from the Average G.P.A. data together with the Normal distribution to answer all of the following questions. Calculate the probability of randomly selecting a class section from the population with an average G.P.A. less than 2.50. nothing% (Round to two decimal places as needed.) Calculate the probability of randomly selecting a class section from the population with an average G.P.A. greater than 3.00. nothing% (Round to two decimal places as needed.) Calculate the probability of randomly selecting a class section from the population with an average G.P.A. between 2.35 and 2.80. nothing% (Round to two decimal places as needed.) Calculate the average G.P.A. that represents the 90th percentile of all Introduction to Statistics class sections over the past five years. nothing (Round to two decimal places as needed.)

Answers

The probability of randomly selecting a class section from the population with an average G.P.A. less than 2.50 is approximately 24.91%. The probability of randomly selecting a class section from the population with an average G.P.A. greater than 3.00 is approximately 6.84%.

To calculate the probabilities and the average GPA for the given questions, we can use the sample mean (2.66) and sample standard deviation (0.23) from the Average G.P.A. data, assuming they represent the population.

1. The probability of randomly selecting a class section from the population with an average G.P.A. less than 2.50 can be calculated using the z-score formula and the standard normal distribution.

The z-score is (2.50 - 2.66) / 0.23 = -0.6957. Using a standard normal distribution table or software, we find the probability to be approximately 24.91%.

2. The probability of randomly selecting a class section from the population with an average G.P.A. greater than 3.00 can be calculated using the z-score formula and the standard normal distribution.

The z-score is (3.00 - 2.66) / 0.23 = 1.4783. Using a standard normal distribution table or software, we find the probability to be approximately 6.84%.

3. The probability of randomly selecting a class section from the population with an average G.P.A. between 2.35 and 2.80 can be calculated by finding the area under the standard normal curve between the corresponding z-scores.

The z-scores for 2.35 and 2.80 are (-0.9130) and (0.6522) respectively. Using a standard normal distribution table or software, we find the probability to be approximately 46.20%.

4. To compute the average G.P.A. that represents the 90th percentile of all Introduction to Statistics class sections over the past five years, we need to find the corresponding z-score. Using a standard normal distribution table or software, we find the z-score to be approximately 1.2816.

We can then calculate the average G.P.A. using the formula: average G.P.A. = (z-score * standard deviation) + mean.

Substituting the values, we get (1.2816 * 0.23) + 2.66 = 2.9668. Therefore, the average G.P.A. that represents the 90th percentile is approximately 2.97.

Note: It is important to keep in mind that these calculations are based on the assumption that the sample accurately represents the population.

To know more about probability refer here:

https://brainly.com/question/32560116#

#SPJ11

The one-to-one functions g and h are defined as follows. g={(-5, 9), (−1, 8), (4, −8), (9, −9)} h(x)=2x−3 Find the following. - 1 8₁¹ (9) = [ 0 g - 1 n 4²¹(x) = [ 0 (non ¹) (-9) = [] 0 0

Answers

We begin with the function g and use the provided functions to determine the values.

1. We check for the corresponding input value in g, which is -1, in order to find g-1(8). As a result, [tex]g(-1,8) = 1.2[/tex]. Since the 21st power operation is not specified in the formula 421(x), we can simplify it to 42. When we plug this into g, we discover that [tex]g(42) = g(16) = -8.3[/tex]. Next, we modify the function h(x) by 9 to find h(-9). Thus, h(-9) = 2(-9) - 3 = -21.4. Finally, we evaluate g(0) and h(0) when both inputs are 0. However, the value of g(0) is undefined because g does not have an input of 0. h(0), however, is equal to 2(0) - 3 =

-3.

learn more about provided here :

https://brainly.com/question/9944405

#SPJ11

What is the area of the region in the first quadrant that is bounded above by y=sqrt x and below by the x-axis and the line y=x-2?

Answers

The area of the given region in the first quadrant is `32/3` square units.

The given region in the first quadrant bounded above by[tex]`y = \sqrt(x)`[/tex] and below by the x-axis

and the line `y = x - 2`. We can compute the area of the region by finding the points of intersection of the curves. These curves intersect at the point `(4,2)`.

Hence, the area of the given region in the first quadrant bounded above by[tex]`y = \sqrt(x)`[/tex] and below by the x-axis and the line

`y = x - 2` is:

[tex]\int[0,4](x - 2)dx + \int[4,16]\sqrt(x)dx[/tex]

=[tex][x^2/2 - 2x][/tex]

from 0 to 4 + [tex][2/3 * x^_(3/2)][/tex]

from 4 to 16= (16 - 8) + (32/3 - 8/3)

= 8 + 8/3

= 24/3 + 8/3

= 32/3.

To know more about quadrant visit:

https://brainly.com/question/26426112

#SPJ11

Express the limit as a definite integral on the given interval.
lim n→[infinity]
n i = 1
xi*
(xi*)2 + 3
Δx, [1, 8]

Answers

The given limit is lim n→∞ ∑i=1nxi*(xi*)²+3 Δx with an interval of [1, 8].Since the limit can be expressed as a definite integral, consider the following steps:

Firstly, substitute xi* with xi and express Δx as (b-a)/n; b being the upper bound and a being the lower bound. The substitution gives;

lim n→∞ ∑i=1nxi((xi)²+3) (b - a) / n

Next, take the limit of the sequence and substitute i/n with x. The substitution gives;[tex]

lim n→∞ [(b - a) / n] ∑i=1n f(x) Δx where f(x) = x((x)²+3).[/tex]

Next, express the summation as an integral by taking the limit as n approaches infinity;

l[tex][tex]lim n→∞ [(b - a) / n] ∑i=1n f(x) Δx where f(x) = x((x)²+3).[/tex][/tex]im n→∞ [(b - a) / n] ∑i=1n f(xi*) Δx ∫ba f(x) dx

Finally, integrate f(x) within the interval [1,8] as follows;∫18 x(x²+3) dxThe definite integral evaluates to;

∫18 x(x²+3) dx = [x²/2 + 3x]_1^8= [8²/2 + 3(8)] - [1²/2 + 3(1)]= 71[tex]∫18 x(x²+3) dx = [x²/2 + 3x]_1^8= [8²/2 + 3(8)] - [1²/2 + 3(1)]= 71[/tex] units squared

To know more about integral visit:

https://brainly.com/question/31059545

#SPJ11

This is the thing that I need help on pls helpppp

Answers

Answer:

144 in^2

Step-by-step explanation:

Using the A = s^2 and the text says that s= 12in

 the answer is 12 in * 12 in = 144 in^2

Use the Laplace transform to solve the given initial-value problem. y' + 3y = e4t, y(0) = 2

Answers

To solve the given initial-value problem by using Laplace transform,y' + 3y = e⁴t, y(0) = 2We will have to follow these steps:

1. Apply Laplace transform to both sides of the given equation y' + 3y = e⁴t.

Applying Laplace transform, we get,

L{y' + 3y} = L{e⁴t} or L{y'} + 3L{y} = L{e⁴t} or sY(s) - y(0) + 3Y(s) = 1 / (s - 4)

2. Substitute the initial value y(0) = 2 to the above equation.

sY(s) - 2 + 3Y(s) = 1 / (s - 4) 3.

Now solve for Y(s), by bringing the like terms together.

sY(s) + 3Y(s) = 1 / (s - 4) + 2sY(s) + 3Y(s) = (1 + 2s) / (s - 4) Y(s) (s + 3) = (1 + 2s) / (s - 4) Y(s) = (1 + 2s) / [(s - 4) (s + 3)]

4. Apply inverse Laplace transform to find y(t)

.Y(s) = (1 + 2s) / [(s - 4) (s + 3)] = A / (s - 4) + B / (s + 3) + C... [1]

where A, B, C are constants obtained by partial fractions.

So, the solution of the given initial-value problem is

y(t) = L^-1 {Y(s)} = L^-1 {A / (s - 4) + B / (s + 3) + C}... [2]

On solving the equation [1] we get, A = -0.1, B = 0.3, C = 0.8

Substitute the values of A, B, and C in equation [2] we get,

y(t) = L^-1 {-0.1 / (s - 4) + 0.3 / (s + 3) + 0.8}

y(t) = -0.1 L^-1 {1 / (s - 4)} + 0.3 L^-1 {1 / (s + 3)} + 0.8 L^-1 {1}

Using the standard Laplace transform formulas

L^-1 {1 / (s - a)} = e^at and L^-1 {1 / (s + a)} = e^-at, we get,

y(t) = -0.1 e^4t + 0.3 e^-3t + 0.8

Therefore, the solution of the given initial-value problem is

y(t) = -0.1 e^4t + 0.3 e^-3t + 0.8, where y(0) = 2.

To know more about Laplace transform visit:

https://brainly.com/question/30759963

#SPJ11

Consider a binomial experiment with n = 11 and p = 0.5. a. Compute ƒ(0) (to 4 decimals). f(0) = b. Compute f(2) (to 4 decimals). ƒ(2) = c. Compute P(x ≤ 2) (to 4 decimals). P(x ≤ 2) = d. Compute

Answers

a. ƒ(0) is approximately 0.0004883. b. ƒ(2) is approximately 0.0273438. c. P(x ≤ 2) is approximately 0.0332031. d. P(x > 2) is approximately 0.9667969.

a. To compute ƒ(0), we use the formula for the probability mass function of a binomial distribution:

ƒ(x) = C(n, x) * p^x * (1-p)^(n-x)

Where C(n, x) represents the binomial coefficient, given by C(n, x) = n! / (x!(n-x)!).

In this case, we have n = 11 and p = 0.5. Plugging in these values, we get:

ƒ(0) = C(11, 0) * 0.5^0 * (1-0.5)^(11-0)

= 1 * 1 * 0.5^11

≈ 0.0004883 (rounded to 4 decimals)

Therefore, ƒ(0) is approximately 0.0004883.

b. To compute ƒ(2), we use the same formula:

ƒ(2) = C(11, 2) * 0.5^2 * (1-0.5)^(11-2)

Plugging in the values, we get:

ƒ(2) = C(11, 2) * 0.5^2 * 0.5^9

= 55 * 0.25 * 0.001953125

≈ 0.0273438 (rounded to 4 decimals)

Therefore, ƒ(2) is approximately 0.0273438.

c. To compute P(x ≤ 2), we need to sum the probabilities from ƒ(0) to ƒ(2):

P(x ≤ 2) = ƒ(0) + ƒ(1) + ƒ(2)

Using the previous calculations:

P(x ≤ 2) = 0.0004883 + ƒ(1) + 0.0273438

To find ƒ(1), we can use the formula:

ƒ(1) = C(11, 1) * 0.5^1 * (1-0.5)^(11-1)

Plugging in the values, we get:

ƒ(1) = 11 * 0.5 * 0.000976563

≈ 0.0053711 (rounded to 4 decimals)

Now we can compute P(x ≤ 2):

P(x ≤ 2) = 0.0004883 + 0.0053711 + 0.0273438

≈ 0.0332031 (rounded to 4 decimals)

Therefore, P(x ≤ 2) is approximately 0.0332031.

d. To compute P(x > 2), we can subtract P(x ≤ 2) from 1:

P(x > 2) = 1 - P(x ≤ 2)

= 1 - 0.0332031

≈ 0.9667969 (rounded to 4 decimals)

Therefore, P(x > 2) is approximately 0.9667969.

Learn more about approximately here

https://brainly.com/question/28521601

#SPJ11

After 1 year,90 \%of the initial amount of a radioactive substance remains. What is the half-life of the substance?

half-life is
years .

Answers

The half-life of the substance is 1.44 years.

Half-life is defined as the time it takes for half of the original amount of a radioactive substance to decay.

It is denoted by T1/2. If after 1 year, 90% of the initial amount of a radioactive substance remains, then it means that 10% of the substance has decayed.

This 10% is equal to half of the original amount of the substance.

Therefore, we can find the half-life using the following formula:0.5 = (1/2)^(t/T1/2)

where t = 1 year (time elapsed) and 0.5 is half of the original amount of the substance.

Substituting the values, we have:0.5 = (1/2)^(1/T1/2)

Taking the logarithm of both sides, we get:

log 0.5 = log [(1/2)^(1/T1/2)]

Using the power rule of logarithms, we can simplify the right-hand side of the equation as follows:

log 0.5 = (1/T1/2) log (1/2)

Recall that log (1/2) is equal to -0.3010. Substituting this value and solving for T1/2:log 0.5 = (1/T1/2) (-0.3010)T1/2 = 1.44 years

Therefore, the half-life of the substance is 1.44 years.

Know more about half-life here:

https://brainly.com/question/1160651

#SPJ11

Find the line integral of f(x,y)=ye x 2
along the curve r(t)=4ti−3tj,−1≤t≤1. The integral of f is

Answers

The value of the line integral of `f(x, y) = ye^(x^2)`along the curve `r(t) = 4ti - 3tj, -1 ≤ t ≤ 1` is `-0.0831255sqrt(145)` (approx).

The given integral is of the form:

Line integral is defined as the integration of a function along a curve. The given integral is a line integral that is the integral of the function along a given curve.  Therefore, the line integral of

`f(x, y) = ye^(x^2)`

along the curve

`r(t) = 4ti - 3tj, -1 ≤ t ≤ 1` is:

We know that,

Let us evaluate

`f(r(t))` first.`f(r(t)) = y(t)e^(x(t)^2)`

where,

`x(t) = 4t`, `y(t) = -3t`

So, `f(r(t)) = (-3t)e^((4t)^2)`

To find the line integral of

`f(x, y) = ye^(x^2)`

along the curve

`r(t) = 4ti - 3tj, -1 ≤ t ≤ 1`.

we integrate

`f(r(t))` with respect to `t`. Hence,

`∫f(r(t))dt` (for t = -1 to t = 1)`= ∫_(-1)^(1) f(r(t))|r'(t)|dt`

since `ds = |r'(t)|dt`)`= ∫_(-1)^(1) [(-3t)e^((4t)^2)]|r'(t)|dt`

substituting `f(r(t))` with the corresponding value

`= ∫_(-1)^(1) [(-3t)e^((4t)^2)]sqrt(16+9)dt`

(substituting `|r'(t)|` with `sqrt(16+9)`)`=

∫_(-1)^(1) [-3tsqrt(145)e^(16t^2)] dt`

Thus, the integral of f is

`∫_(-1)^(1) [-3tsqrt(145)e^(16t^2)] dt = (-sqrt(145)/4)[e^(16t^2)]_(-1)^(1)`

Let's evaluate

`e^(16)` and `e^(-16)` now

.`e^(16) = 8.8861 xx 10^6`

`e^(-16) = 1.1254 xx 10^(-7)`

Therefore,

`(-sqrt(145)/4)[e^(16t^2)]_(-1)^(1)`= `(-sqrt(145)/4)

[e^(16) - e^(-16)]`

= `(-sqrt(145)/4)[8.8861 xx 10^6 - 1.1254 xx 10^(-7)]`

= `(-sqrt(145)/4)(8.8860985 xx 10^6 - 1.1254 xx 10^(-7))

= -0.0831255 sqrt(145)`

Hence, the value of the line integral of `f(x, y) = ye^(x^2)`along the curve `r(t) = 4ti - 3tj, -1 ≤ t ≤ 1` is `-0.0831255sqrt(145)` (approx).

To know more about line integral visit:

https://brainly.com/question/30763905

#SPJ11

how does restricting the range of a variable affect the correlation coefficient?

Answers

Restricting the range of a variable affects the correlation coefficient by making it appear stronger than it actually is.

The correlation coefficient is a statistical measure used to show how strong and what direction a relationship is between two variables. Correlation coefficients can range from -1 to +1. The closer the correlation coefficient is to -1 or +1, the stronger the relationship. The closer the coefficient is to 0, the weaker the relationship.

What does it mean to restrict the range of a variable, Restricting the range of a variable means that you only consider a portion of the possible values for that variable. When you restrict the range of a variable, you are excluding some of the data from your analysis. This can make the correlation coefficient appear stronger than it actually is because you are only looking at a portion of the data.

To know more about correlation coefficient visit:

https://brainly.com/question/15577278

#SPJ11

3. Using Divergence theorem, evaluate f Eds, where E = xi + yj + zk, over the cube bounded by x = 0, x = 1, y = 0, y = 1, z = 0, z = 1. [6]

Answers

The flux of the vector field E over the given cube is 3.

The Divergence theorem relates the flux of a vector field across a closed surface to the divergence of the vector field within the volume enclosed by that surface. Using the Divergence theorem, we can evaluate the flux of a vector field over a closed surface by integrating the divergence of the field over the enclosed volume.

In this case, the vector field is given by E = xi + yj + zk, and we want to find the flux of this field over the cube bounded by x = 0, x = 1, y = 0, y = 1, z = 0, z = 1. To evaluate the flux using the Divergence theorem, we first need to calculate the divergence of the vector field. The divergence of E is given by: div(E) = ∂x(xi) + ∂y(yj) + ∂z(zk) = 1 + 1 + 1 = 3

Now, we can apply the Divergence theorem: ∬S E · dS = ∭V div(E) dV

The cube is bounded by six surfaces, the integral on the left side of the equation represents the flux of the vector field E over these surfaces. On the right side, we have the triple integral of the divergence of E over the volume of the cube.

As the cube is a unit cube with side length 1, the volume is 1. Therefore, the integral on the right side simply evaluates to the divergence of E multiplied by the volume: ∭V div(E) dV = 3 * 1 = 3

Thus, the flux of the vector field E over the given cube is 3.

To know more about flux, refer here :

https://brainly.com/question/15655691#

#SPJ11

6. For which value(s) of k is the function f(x) = = a probability density function? (A) k = -2. (B) k = 1. (C) k = 2. (D) k = 1 and (E) k 113 2 = 13 kxe 0, x > 0 x < 0

Answers

A.  This value of k does not result in a probability density function.

B.  This value of k results in a probability density function.

C.  This value of k does not result in a probability density function.

D. The correct answer is option (B) k = 1.

For a function to be a probability density function, it must satisfy the following conditions:

f(x) must be greater than or equal to 0 for all x.

The area under the curve of f(x) from negative infinity to positive infinity must be equal to 1.

Using these conditions, we can check each value of k given in the options:

(A) k = -2:

f(x) = 13kxe^(kx)

f(x) = 13(-2)x e^(-2x)

For x > 0, this is always positive and satisfies condition 1. For x < 0, this is negative and does not satisfy condition 1. Therefore, this value of k does not result in a probability density function.

(B) k = 1:

f(x) = 13kxe^(kx)

f(x) = 13(1)x e^(x)

For x > 0, this is always positive and satisfies condition 1. For x < 0, this is 0 and also satisfies condition 1. Moreover, the integral of this function from negative infinity to positive infinity equals 1. Therefore, this value of k results in a probability density function.

(C) k = 2:

f(x) = 13kxe^(kx)

f(x) = 13(2)x e^(2x)

For x > 0, this is always positive and satisfies condition 1. For x < 0, this is negative and does not satisfy condition 1. Therefore, this value of k does not result in a probability density function.

(D) k = 1 and (E) k = 2 do not change our previous answer, i.e., k = 1 is the only value of k that results in a probability density function.

Therefore, the correct answer is option (B) k = 1.

Learn more about probability from

https://brainly.com/question/251701

#SPJ11

Suppose a multiple regression model is fitted into a variable called model. Which Python method below returns fitted values for a data set based on a multiple regression model? Select one.
model.values
fittedvalues.model
model.fittedvalues
values.model

Answers

The Python method "model.fittedvalues" returns fitted values for a data set based on a multiple regression model.

When fitting a multiple regression model in Python using a library like statsmodels or scikit-learn, the resulting model object provides various methods and attributes to access different information about the model. The "model.fittedvalues" method specifically returns the fitted values for the data set based on the multiple regression model.

These fitted values represent the predicted values of the dependent variable based on the independent variables in the model.

By calling "model.fittedvalues", you can obtain an array or series containing the predicted values corresponding to the data points used to fit the model.

This allows you to evaluate the model's performance, compare predicted values with actual values, and perform further analysis or calculations based on the fitted values.

To learn more about regression model visit:

brainly.com/question/31969332

#SPJ11

Let a_(1),a_(2),a_(3),dots, a_(n),dots be an arithmetic sequence. Find a_(13) and S_(23). a_(1)=3,d=8

Answers

To find the 13th term, we use the formula of the nth term of an arithmetic sequence, which is given by an = a1 + (n-1)dwhere,an = nth term of the sequencea1 = first term of the sequenced = common difference of the sequence.

Substituting the given values, we get;a13 = 3 + (13-1)8= 3 + 96= 99Therefore, the 13th term is 99.To find the sum of first 23 terms, we use the formula of the sum of the first n terms of an arithmetic sequence, which is given by Sn = n/2(2a1 + (n-1)d)where,Sn = sum of first n terms of the sequencea1 = first term of the sequenced = common difference of the sequence Substituting the given values, we get;S23 = 23/2(2(3) + (23-1)8)= 23/2(6 + 176)= 23/2 × 182= 2093Therefore, the sum of first 23 terms is 2093.

To Know more about Substituting visit:

brainly.com/question/29383142

#SPJ11

A rocket blasts off vertically from rest on the launch pad with a constant upward acceleration of 2.70 m/s². At 30.0 s after blastoff, the engines suddenly fail, and the rocket begins free fall. Express your answer with the appropriate units. m avertex 9.80 - Previous Answers ▾ Part D How long after it was launched will the rocket fall back to the launch pad? Express your answer in seconds. IVE ΑΣΦ ? Correct t = 45.7 Submit Previous Answers Request Answer S

Answers

Rocket need time of 30sec to fall back to the launch pad.

To determine the time it takes for the rocket to fall back to the launch pad, we can use the equations of motion for free fall.

We know that the acceleration due to gravity is -9.80 m/s² (negative because it acts in the opposite direction to the upward acceleration during the rocket's ascent). The initial velocity when the engines fail is the velocity the rocket had at that moment, which we can find by integrating the acceleration over time:

v = u + at

where v is the final velocity, u is the initial velocity, a is the acceleration, and t is the time.

Integrating the acceleration gives:

v = -9.80t + C

We know that at t = 30.0 s, the velocity is 0 since the rocket begins free fall. Substituting these values into the equation, we can solve for C:

0 = -9.80(30.0) + C

C = 294

So the equation for the velocity becomes:

v = -9.80t + 294

To find the time it takes for the rocket to fall back to the launch pad, we set the velocity equal to 0 and solve for t:

0 = -9.80t + 294

9.80t = 294

t = 30.0 s

Therefore, the rocket will fall back to the launch pad 30.0 seconds after it was launched.

To know more about acceleration refer here:

https://brainly.com/question/19537384?#

#SPJ11

Let (-√11,-5) be a point on the terminal side of 0. Find the exact values of sine, sece, and tan 0. 3 0/0 5 sine = 6 Ś 6√11 sece = 11 5√√11 tan 0 11 = X ?

Answers

The exact values of $\sin \theta$, $\sec \theta$, and $\tan \theta$ are $\frac{-5}{6}$, $-\frac{6\sqrt{11}}{11}$, and $\frac{5\sqrt{11}}{11}$ respectively.

Given, Point $(-\sqrt{11}, -5)$ lies on the terminal side of angle $\theta$.

i.e., $x = -\sqrt{11}$ and $y = -5$.

To find the exact values of $\sin \theta$, $\sec \theta$, and $\tan \theta$.

Using Pythagoras theorem, $r = \sqrt{(-\sqrt{11})^2 + (-5)^2} = \sqrt{11 + 25}

= \sqrt{36}

= 6$.

$\sin \theta = \frac{y}{r} = \frac{-5}{6}$ .......(1)

$\sec \theta = \frac{r}{x} = \frac{6}{-\sqrt{11}} = -\frac{6\sqrt{11}}{11}$ .......(2)

$\tan \theta = \frac{y}{x} = \frac{-5}{-\sqrt{11}} = \frac{5\sqrt{11}}{11}$ .......(3)

Hence, the exact values of $\sin \theta$, $\sec \theta$, and $\tan \theta$ are $\frac{-5}{6}$, $-\frac{6\sqrt{11}}{11}$, and $\frac{5\sqrt{11}}{11}$ respectively.

To know more about Pythagoras theorem visit:

https://brainly.com/question/21926466

#SPJ11

Question Homework: Homework 4 18, 6.1.32 39.1 of 44 points Part 2 of 2 Save Points: 0.5 of 1 Assume that a randomly selected subject is given a bone density test. Those test scores are normally distri

Answers

Assuming that a randomly selected subject is given a bone density test, the test scores are normally distributed with a mean score of 85 and a standard deviation of 12.

This means that 68% of subjects have bone density test scores within one standard deviation of the mean, which is between 73 and 97.

The probability of randomly selecting a subject with a bone density test score less than 60 is 0.0062 or 0.62%.

Given: Mean = 85

Standard Deviation = 12

Using the standard normal distribution table, we find that the probability of z being less than -2.08 is 0.0188.

Therefore, the probability of a randomly selected subject being given a bone density test, with a score less than 60 is 0.0188 or 1.88%.

Summary: The given problem is related to the probability of a randomly selected subject being given a bone density test with a score less than 60. Here, we have used the standard normal distribution table to calculate the probability. The calculated probability is 0.0188 or 1.88%.

Learn more about probability click here:

https://brainly.com/question/13604758

#SPJ11

In January 2019, the Dow Jones Industrial Average (DJIA) was
23,138.82. By September 2019, the DJIA was 26,970.71. Construct an
index value for September 2019, using January 2019 as the base (=
100) a

Answers

The index value for September 2019  = (26,970.71 / 23,138.82) x 100Index value = 116.59

The Dow Jones Industrial Average (DJIA) was 23,138.82 in January 2019 and rose to 26,970.71 by September 2019. To construct an index value for September 2019 with January 2019 as the base of 100, you can use the following formula:Index value = (Current value / Base value) x 100Therefore, the index value for September 2019 can be calculated as follows:Index value = (26,970.71 / 23,138.82) x 100Index value = 116.59

AThe Dow Jones Industrial Average (DJIA) is a stock market index that represents the performance of 30 large publicly traded companies in the United States. It is one of the most widely used indicators of the overall health of the US stock market.

In January 2019, the DJIA was 23,138.82, and by September 2019, it had risen to 26,970.71. To construct an index value for September 2019 using January 2019 as the base of 100, you can use the formula given above.The index value is a measure of the relative performance of the DJIA from January 2019 to September 2019.

By setting the index value at 100 for January 2019, we can compare the DJIA's performance over the eight-month period. The index value of 116.59 for September 2019 indicates that the DJIA has grown by 16.59% since January 2019.

This is a strong indication of the strength of the US stock market, as the DJIA is considered to be a reliable indicator of the overall health of the market.the Dow Jones Industrial Average (DJIA) was 23,138.82 in January 2019 and rose to 26,970.71 by September 2019.

The index value for September 2019 can be calculated as 116.59, using January 2019 as the base of 100. This indicates that the DJIA has grown by 16.59% since January 2019, reflecting the strength of the US stock market.

To know more about  index value visit:

brainly.com/question/8154168

#SPJ11

Other Questions
research shows that when people perceive others as attractive, they treat them _____. Define the notions of functional and dysfunctional discrimination as they apply the workplace context. Using examples published in online news sources in 2021, demonstrate the differences between the two types of discrimination. Describe TWO (2) strategies that managers can employ to prevent dysfunctional discrimination in the workplace. When volatility increases with all else remaining the same, describe briefly what is the impact on the value of a call and put option respectively. 9 A stock price (which pays no dividends) is $50 and the strike price of a two year With reference to a product or service of your choice, describeany four (4) key criteria that you would consider for selectingsuppliers. What temperature change in C is produced when 800 calories are absorbed by 100 g of water? 1) The fractional banking system used in New Zealand is key to the process of creating money used by the Reserve Bank of New Zealand (RBNZ). This involves a number known as the Reserve Ratio (RR), which is the fraction of deposits commercial banks keep in reserve with the Reserve Bank. The money multiplier is also important to this process, as it represents the 'flow on effects of money entering the economy that is not kept in reserve. [Ref: Notes 7-1, 7-21 a) Let us assume that the RR for commercial banks is 25%. Now, the RBNZ injects $2 million worth of money into the monetary base through the commercial banks. How much of this initial injection of money is kept in reserve? How much is lent out to the rest of the economy? b) What is the value of the money multiplier associated with this RR? c) Using the money multiplier, work out the total money increase of the $2 million injection d) What are the three functions of money? Please describe each function briefly. In general costs directly by the level of responsibility are to the responsibility level are while costs that are Lendell Company has these comparative balance sheet data:LENDELL COMPANY Balance sheets December 3120172016Cash1500030000Accounts receivable7000060000Inventory6000050000Plant assets net200000180000345000320000Accounts payable5000060000Mortgage payable 15%100000100000Common stock $10 par140000120000Retained earnings5500040000345000320000Additional Information for 2017:Net income was $25,000.Sales on account were $375,000.Sales returns and allowances amounted to $25,000.Cost of goods sold was $198,000.Net cash provided by operating activities was $48,000.Capital expenditures were $25,000, and cash dividends were $10,000.Compute the following ratios at December 31, 2017. Round current ratio to 2 decimal places, and all other answers to 1 decimal place, Use 365 days for calculation.a. Current ratio_______:1b. Accounts receivable turnover_______timesc. Average collection period_______daysd. Inventory turnovefr_______timese. Days inventory_______daysf. Free cash flow$_______ Answer the following in the space provided Wat are the attributes of a "good" econometric model? B) What are the consequences of omitting a relevant variable(s) from a model? C) What are the consequences of including irrelevant variables in a model? Current Ratio and Quick Ratio use some of the same data for their calculations. Which of the following statements is frue? Multcle Choice Quick ratios include inventory in the calculation The lower the current reso, the more liquid the company appears to be Quick ratos tend to be a larger percentage raso then current rasos Quick ratios are expected to be a smaller rabo than current rasos Suppose you want to deposit a certain amount of money into a savings account with a fixed annual interest rate. We are interested in calculating the amount needed to deposit in order to have, for instance, $5000 in the account after three years. The initial deposit amount can be obtained using the following formula:pomo = cco(1 + mohy)moh In the presence of free riders, the equilibrium allocation of any good will be:Select one:a. zerob. less than optimal.c. optimald. more than optimal. Prepare the issuer's journal entry for each of the following separate transactions, a. On March 1, Atlantic Company issues 47,000 shares of $3 par value common stock for $311,000 cash. b. On April 1, OP Company issues no-par value common stock for $79,000cosh. c. On April 6, MPG issues 2,900 shares of $20 par value common stock for $48,000 of inventory, $180,000 of machinery, and acceptance of a $98,000 note payable. Journal entry worksheet Record the issuance of 47,000 shares of $3 par value common stock for $311,000 cash. Note: Enter debits before credits. Journal entry worksheet Record the issuance of no-par value common stock for $79,000 cash. Note: Enter debits before credits. Journal entry worksheet Record the issuance of 2,900 shares of $20 par value common stock for $48,000 of inventory, $180,000 of machinery, and acceptance of a $98,000 note payable. Note: Enter debits before credits. On January 2, Neumann Corp. changes from the LIFO to the FIFO method. Its financial statement notes indicate that beginning inventory would have been $10,000 higher if it had utilized FIFO during prior years. Neumann's journal entry should include a A regular pentagon with a perimeter of 28 inches is dilated by a scale factor of 8/7 to create a new pentagon. What is the perimeter of the new pentagon? Apparently, all three advisors have studied economics, but their views on positive economics are different.a. with rent control, the government guarantees landlords a minimum level of profit.b. they become resigned to the fact that many of their apartments are going to be vacant at any given timec. with shortages and waiting lists, they have no incentive to maintain and improve their property.d. with rent control, it becomes the government's responsibility to maintain rental housing. On January 1, 2020, Metlock Company issued 10-year, $2,160,000 face value, 6% bonds, at par. Each $1,000 bond is convertible into 14 shares of Metlock common stock. Metlock's net income in 2020 was $470,800, and its tax rate was 20%. The company had 107,000 shares of common stock outstanding throughout 2020. None of the bonds were converted in 2020. (a) Compute diluted earnings per share for 2020. (Round answer to 2 decimal places, e.g. $2.55.) Diluted earnings per share $ (b) Compute diluted earnings per share for 2020, assuming the same facts as above, except that $1,070,000 of 6% convertible preferred stock was issued instead of the bonds. Each $100 preferred share is convertible into 5 shares of Metlock common stock. (Round answer to 2 decimal places, e.g. $2.55.) Diluted earnings per share $ If II2 and I3 represent the principal moments of inertia of a rigid body and w= (wi,w2,w3 is the angular velocity with components along the three principal axes (a) the z-component of the torque acting on the body in general is T3=I3w3 b) the z-component of the torque acting on the body in general is T3=I33+I2 I1)w1W2. c for torque free motion of the rigid body,always we have I3w3 = constant d for torque free motion of the rigid bodyin general we have I3w3=I-Iww2 Relaxing one muscle group after another until one achieves a completely relaxed state of comfort is called progressive relaxation. True or false? John is trying to decide on how many copies of a book to order at the start of the upcoming selling season for a bookstore. The book retails at $28.00, and the unsold copies will be disposed at 75% off the retail price at the end of the season. John estimates that demand for this book during the season is normal with a mean of 100 and a standard deviation of 42.(a) Suppose the unit production-plus-shipping cost of the book is $8.00. If the bookstore is owned by the publisher (i.e., the bookstore and the publisher are centralized) and John is the manager of the bookstore, then how many books should John order to maximize the expected profit of the publisher? [10 pts](b) If the bookstore is owned by John and he purchases the book from the publisher at $20.00, then how many books should John order to maximize his own expected profit? [10 pts]Suppose John owns the bookstore. The publisher is thinking of offering the following deal to John. At the end of the season, the publisher will buy back unsold copies at a predetermined price of $15.00. John would have to bear, however, the cost of shipping unsold copies back to the publisher at $1.00 per copy.(c) How many books should John order to maximize his expected profits given the buyback offer? [10 pts](d) Suppose the publisher continues to charge $20 per book and John still incurs a $1 cost to ship each book back to the publisher. What price should the publisher pay John for returned books to maximize the supply chains profit? [10 pts]