Question 5 Which of the following pairs of variables X and Y will likely have a negative correlation? . (1) X = outdoor temperature, Y: = amount of ice cream sold . (II) X = height of a mountain, Y =

Answers

Answer 1

Based on the given pairs of variables: (1) X = outdoor temperature, Y = amount of ice cream sold,(II) X = height of a mountain, Y = number of climbers  The pair of variables that is likely to have a negative correlation is (I) X = outdoor temperature, Y = amount of ice cream sold.

In general, as the outdoor temperature increases, people tend to consume more ice cream. Therefore, there is a positive correlation between the outdoor temperature and the amount of ice cream sold. However, it is important to note that correlation does not imply causation, and there may be other factors influencing the relationship between these variables. On the other hand, the height of a mountain and the number of climbers are not necessarily expected to have a negative correlation. The relationship between these variables depends on various factors, such as accessibility, popularity, and difficulty level of the mountain.

Learn more about ice cream here:

https://brainly.com/question/16683845

#SPJ11


Related Questions

a) A fair dice is tossed 5 times. i) Use counting methods to find the probability of getting 5 consecutive sixes 66666. II) Use counting methods to find the probability of getting the exact sequence 6

Answers

The probability of getting the exact sequence 65634 when tossing a fair die 5 times is also 1/7776.

i) To find the probability of getting 5 consecutive sixes (66666) when a fair die is tossed 5 times, we can use counting methods.

Since each die toss is independent and has 6 possible outcomes (numbers 1 to 6), the probability of getting a six on any single toss is 1/6.

To calculate the probability of getting 5 consecutive sixes, we multiply the probability of getting a six on each toss:

P(66666) = (1/6) * (1/6) * (1/6) * (1/6) * (1/6) = (1/6)^5 = 1/7776

Therefore, the probability of getting 5 consecutive sixes (66666) when tossing a fair die 5 times is 1/7776.

ii) To find the probability of getting the exact sequence 65634 when a fair die is tossed 5 times, we again use counting methods.

The sequence 65634 consists of specific outcomes for each toss of the die. Since there are 6 possible outcomes for each toss, the probability of obtaining the sequence 65634 is the product of the probabilities of each specific outcome:

P(65634) = (1/6) * (1/6) * (1/6) * (1/6) * (1/6) = (1/6)^5 = 1/7776

Learn more about The probability here:

https://brainly.com/question/2444753

#SPJ11

test the series for convergence or divergence. [infinity] (−1)n71/n n = 1

Answers

Given series is  ∑n=1∞(−1)n(71/n)To check whether the given series is convergent or divergent we will use the alternating series test for the convergence of an infinite series which states that:If {an} is a decreasing sequence of positive terms and if limn→∞an=0 .

then the alternating series ∑n=1∞(−1)n−1an is convergent.Let's check whether the above-given series is fulfilling the above-given conditions or not.We can see that 71/n is a decreasing function.let an=71/nlimn→∞(71/n) = 0Hence we can say that the alternating series ∑n=1∞(−1)n−1an =  ∑n=1∞(−1)n(71/n) is convergent.So, the given series is convergent.

To know more about divergent visit :-

https://brainly.com/question/31778047

#SPJ11

find the work done by the force field f(x, y) = xi (y 1)j in moving an object along an arch of the cycloid r(t) = (t − sin(t))i (1 − cos(t))j, 0 ≤ t ≤ 2.

Answers

The work done by the force field f(x, y) = xi (y 1)j in moving an object along an arch of the cycloid

r(t) = (t − sin(t))i (1 − cos(t))j, 0 ≤ t ≤ 2 is -4

To find the work done by the force field in moving an object along the arch of the cycloid r(t), we need to compute the line integral of the dot product of the force field with the unit tangent vector of the arch. The cycloid is given by:r(t) = (t - sin(t))i + (1 - cos(t))j, 0 ≤ t ≤ 2.To find the unit tangent vector T(t), we differentiate the cycloid:

r'(t) = (1 - cos(t))i + sin(t)j.

T(t) = r'(t)/|r'(t)|

= (1 - cos(t))/√(2 - 2cos(t)) i + sin(t)/√(2 - 2cos(t)) j. The work done by the force field in moving the object along the arch is given by the line integral:W = ∫C f(r) · T(t) ds,where C is the arch of the cycloid, r is the position vector, T is the unit tangent vector, and ds is the arc length element. We have: f(x, y) = xi(y - 1)j, so f(r(t))

= (t - sin(t))i(1 - cos(t) - 1)j

= (t - sin(t))i(-cos(t))j

= -t cos(t) i + (t sin(t) - t) j.Writing this in terms of the unit tangent vector, we have:f(r) ·

T = (-t cos(t) i + (t sin(t) - t) j) · ((1 - cos(t))/√(2 - 2cos(t)) i + sin(t)/√(2 - 2cos(t)) j)

= -t cos(t) (1 - cos(t))/(2 - 2cos(t)) + (t sin(t) - t) sin(t)/(2 - 2cos(t))

= -t (cos(t) - cos²(t) + sin²(t))/(2 - 2cos(t))

= -t (cos(t) - 1)/(1 - cos(t))

= t (1 - cos(t))/(cos(t) - 1). Therefore, the work done by the force field in moving the object along the arch is:

W = ∫C f(r) · T(t) ds

= ∫0² t(1 - cos(t))/(cos(t) - 1) |r'(t)| dt

= ∫0² t(1 - cos(t))/√(2 - 2cos(t)) dt

= -∫0² t d(cos(t))

= t(cos(t) - 1) |0²

= -4. The work done by the force field in moving the object along the arch of the cycloid is -4.

To know more about work done visit:-

https://brainly.com/question/31655489

#SPJ11

(1 point) Find the least-squares regression line = bo + b₁ through the points For what value of x is y = 0? C= (-2, 0), (2, 7), (6, 13), (8, 18), (11, 27).

Answers

The regression equation for the given data is y = 2x + 3

What is the least-squares regression line?

To solve this problem, we need to calculate the least-square regression line;

Sum of X = 25

Sum of Y = 65

Mean X = 5

Mean Y = 13

Sum of squares (SSX) = 104

Sum of products (SP) = 208

Regression Equation = y = bX + a

b = SP/SSX = 208/104 = 2

a = MY - bMX = 13 - (2*5) = 3

y = 2x + 3

Learn more on regression equation here;

https://brainly.com/question/9302810

#SPJ4

in δtuv, t = 820 inches, m∠u=132° and m∠v=25°. find the length of u, to the nearest inch.

Answers

To find the length of side u in triangle TUV, we can use the Law of Sines. The Law of Sines states that in any triangle, the ratio of the length of a side to the sine of its opposite angle is constant.

Using the Law of Sines, we have:

u / sin(U) = t / sin(T)

Where u is the length of side u, t is the length of side t, U is the measure of angle U, and T is the measure of angle T.

Given:

t = 820 inches (length of side t)

m∠u = 132° (measure of angle U)

m∠v = 25° (measure of angle T)

We can substitute these values into the Law of Sines equation:

u / sin(132°) = 820 inches / sin(25°)

To find the length of side u, we can solve for u by multiplying both sides of the equation by sin(132°):

u = (820 inches / sin(25°)) * sin(132°)

Using a calculator, we can evaluate this expression:

u ≈ 1923.91 inches

Therefore, the length of side u, to the nearest inch, is approximately 1924 inches.

To know more about expression visit-

brainly.com/question/29964245

#SPJ11

A logging retail company claims that the amount of usable lumber in each of its harvested
trees averages 172 cubic feet and has a standard deviation of 12.4 cubic feet. Assume that
these amounts have an approximately normal distribution and find the z-score for a harvested
tree with 151 cubic feet of usable lumber. Would you consider it unusual for a tree to have
151 cubic feet of usable lumber based on the z-score?

Answers

The given parameters are: Mean (μ) = 172, Standard Deviation (σ) = 12.4.

The formula to calculate z-score is given by:

z = (x - μ) / σ

Where x is the amount of usable lumber in a harvested tree. Therefore, to find the z-score for a harvested tree with 151 cubic feet of usable lumber, we can substitute the values into the formula as shown below:

z = (x - μ) / σz = (151 - 172) / 12.4z = -21/12.4z = -1.69.

Therefore, the z-score for a harvested tree with 151 cubic feet of usable lumber is -1.69. To determine whether a tree having 151 cubic feet of usable lumber is unusual or not based on the z-score, we can use the rule of thumb which states that any z-score that is greater than 2 or less than -2 is considered unusual since it lies more than 2 standard deviations away from the mean. Since the calculated z-score of -1.69 is not greater than 2 or less than -2, it is not unusual for a tree to have 151 cubic feet of usable lumber.

To know more about Mean refer to:

https://brainly.com/question/1136789

#SPJ11

Which of the following formulas is CORRECT for finding the present value of an investment
A) FV = PV/(1 + r)^n
B) PV = FV x (1 + r)n
C) PV = FVn x (1 + r)
D) PV = FV x 1/(1 + r)^n

Answers

The correct formula for finding the present value of an investment is given by option D) PV = FV x 1/(1 + r)^n.

The present value (PV) of an investment is the current value of future cash flows discounted at a specified rate. The formula for calculating the present value takes into account the future value (FV) of the investment, the interest rate (r), and the number of periods (n).

Option D) PV = FV x 1/(1 + r)^n represents the correct formula for finding the present value. It incorporates the concept of discounting future cash flows by dividing the future value by (1 + r)^n. This adjustment accounts for the time value of money, where the value of money decreases over time.

In contrast, options A), B), and C) do not accurately represent the present value formula and may lead to incorrect calculations.

Learn more about present value here: brainly.com/question/28304447

#SPJ11

Write the equation of the line in fully simplified slope-intercept form.
-12-11-10-9-8-7
6
5
+
co
12
55555
11
10
9
-2-1-
TO
-9
-10
-11
"12
(4
4 5 6 7 8 9 10 11 12

Answers

To find the equation of a line, we need to determine its slope and its y-intercept.

Let's use the given graph to find the slope of the line.The slope of the line can be found as shown

:Slope = Change in y-coordinate / Change in x-coordinate

Let's select two points on the line and find the change in the y-coordinate and the change in the x-coordinate.

Using points (-12, 5) and (12, -7),

we get:Change in y-coordinate = -7 - 5

= -12

Change in x-coordinate = 12 - (-12)

= 24

Thus, the slope of the line is:Slope = -12/24

Slope = -1/2

The slope-intercept form of the equation of a line is given as:y = mx + b

where m is the slope of the line and b is the y-intercept.

We have found the slope of the line. To find the y-intercept, we can use any point on the line.Using point (0, -2),

we get:-2 = (-1/2)(0) + b-2

= b

Thus, the y-intercept of the line is b = -2.Substituting the values of m and b in the slope-intercept form of the equation of a line, we get:y = -1/2x - 2

This is the required equation of the line in fully simplified slope-intercept form.

To know more about equation visit :-

https://brainly.com/question/29174899

#SPJ11

X₁ ~ X / ₁ (c) " k₁ k₁ 2² 2 where Y = X₁ + X₂ (a) Let using the first principle, show 2 X₁ (b) Show the moment generating function of Y ~ X ₁₁+k₂ jf Y = X₁ + X₂ 2 show m m Y=�

Answers

(a) Using the first principle, we can show that 2X₁ = X₁ + X₁.

(b) To find the moment generating function (MGF) of Y = X₁ + X₂², we need to calculate the MGF of each individual random variable and then use the properties of MGFs. However, the equation provided, Y = X₁ + X₂², seems to have a formatting issue, as the superscript "2" appears after the plus sign. Please clarify the equation or provide the correct equation, so that I can help you calculate the MGF of Y.

(a) Using the first principle, we can show that 2X₁ = X₁ + X₁. This is a simple application of the distributive property. We can rewrite 2X₁ as X₁ + X₁, which is the sum of two identical random variables, X₁.

(b) To calculate the MGF of Y = X₁ + X₂², we need to determine the MGFs of X₁ and X₂ and then use the properties of MGFs. However, the equation provided seems to have a formatting issue or missing information. Please clarify the equation or provide the correct equation for Y, including the appropriate definitions and distributions of X₁ and X₂.

The provided explanations and calculations demonstrate the steps to show the sum of two identical random variables (2X₁ = X₁ + X₁) and the need for clarification or correction in the equation (Y = X₁ + X₂²) to calculate the moment generating function. Further clarification or correction is required to proceed with the calculations.

To know more about moment generating function (MGF) visit:

https://brainly.com/question/30763700

#SPJ11

A Statistics professor assigned 10 quizzes over the course of the semester. He wanted to see if there was a relationship between the total mark of all 10 quizzes and the final exam mark. There were 294 students who completed all the quizzes and wrote the final exam. The standard deviation of the total quiz marks was 11, and that of the final exam was 20. The correlation between the total quiz mark and the final exam was 0.69. Based on the least squares regression line fitted to the data of the 294 students, if a student scored 15 points above the mean of total quiz marks, then how many points above the mean on the final would you predict her final exam grade to be? The predicted final exam grade is above the mean on the final. Round your answer to one decimal place, but do not round in intermediate steps. preview answers

Answers

if a student scored 15 points above the mean of total quiz marks, then their predicted final exam grade would be about 18.8 points above the mean of the final exam marks.

Given the following information:

Number of quizzes: 10

Sample size: 294 students

Standard deviation of total quiz marks: 11

Standard deviation of final exam marks: 20

Correlation between total quiz mark and final exam: 0.69

A student scored 15 points above the mean of total quiz marks

Therefore, if a student scored 15 points above the mean of total quiz marks, then their predicted final exam grade would be about 18.8 points above the mean of the final exam marks. we cannot give an exact prediction for the final exam grade.

Learn more about mean here

https://brainly.com/question/1136789

#SPJ11

Write an equivalent expression so that each factor has a single power. Let m,n, and p be numbers. (m^(3)n^(2)p^(5))^(3)

Answers

An equivalent expression so that each factor has a single power when (m³n²p⁵)³ is simplified is m⁹n⁶p¹⁵.

To obtain the equivalent expression so that each factor has a single power when (m³n²p⁵)³ is simplified, we can use the product rule of exponents which states that when we multiply exponential expressions with the same base, we can simply add the exponents.

The expression (m³n²p⁵)³ can be simplified as follows:(m³n²p⁵)³= m³·³n²·³p⁵·³= m⁹n⁶p¹⁵

Thus, an equivalent expression so that each factor has a single power when (m³n²p⁵)³ is simplified is m⁹n⁶p¹⁵.

Know more about expression here:

https://brainly.com/question/1859113

#SPJ11

What is the equation of the quadratic function represented by this table? Select the correct answer from each drop-down menu: What is the equation of the quadratic function represented by this table? x y
3 3.75 -2 4 -1 3.75 0 3 1 1.75

Answers

The equation of the quadratic function represented by this table is y = -1.25x2 + 3.75x + 3.

The quadratic function that is represented by the given table is:y = -1.25x2 + 3.75x + 3.The given table contains five values of x and y. We can use these values to form a system of linear equations to find the quadratic function. The general form of a quadratic equation is y =[tex]ax2[/tex] + bx + c, where a, b, and c are constants.x y3 3.75-2 41 1.753 .

We can start by substituting the value of x in the quadratic equation and solving for the values of a, b, and c. Using (0, 3) to solve for c:3 = [tex]a(0)2 + b(0) + c = > c[/tex] = 3Using (-2, 4) and (2, 4) to solve for a:4 = a(-2)2 + [tex]b(-2) + 3 = > 4 = 4a - 2b + 3 = > a = 1[/tex]Using (3, 3.75) to solve for b:3.75 = [tex]a(3)2 + b(3) + 3 = > 3.75 = 9a + 3b + 3 = > b =[/tex] -5.25Substituting the values of a, b, and c into the general form of a quadratic equation gives: y = [tex]ax2 + bx + c = 1x2 - 5.25x + 3 = -1.25x2 + 3.75x + 3.[/tex]

To know more about quadratic function visit :-

https://brainly.com/question/18958913

#SPJ11

(8 points) For each problem, select the best response. (a) Let A, B and C be mutually exclusive events such that S is equal to A union B union C. Which of the following statements is true A. One of A, B, or C must be a subset of the other two events B. A, B, and C must be independent events © c. P(S) = P(A) + P(B) + P(C) D. Probability of A given B must equal the probability of C E. S contains elements that are not in A or B or C F. None of the above.

Answers

The probability of the union of these events, represented by S is defined as "P(S) = P(A) + P(B) + P(C)" is true. Therefore, the best response for the given problem is option C.

Since A, B, and C are mutually exclusive events, it means that they cannot occur simultaneously. Therefore, the probability of the union of these events, represented by S, is equal to the sum of their individual probabilities. In other words, the probability of S occurring is equal to the sum of the probabilities of A, B, and C occurring separately.

Hence, option C, which states that "P(S) = P(A) + P(B) + P(C)", is the correct response.

To know more about probability refer here:

https://brainly.com/question/31828911

#SPJ11

16. The stem-and-leaf plot represents the amount of money a worker 10 0 0 36 earned (in dollars) the past 44 weeks. Use this plot to calculate the IQR 11 5 6 8 for the worker's weekly earnings. 12 1 2

Answers

The interquartile range (IQR) for the worker's weekly earnings is 15 dollars.

To calculate the interquartile range (IQR) from the given stem-and-leaf plot, we need to obtain the 25th and 75th percentiles.

From the stem-and-leaf plot, we can observe the following data points for the worker's weekly earnings:

10, 10, 10, 10, 11, 12, 15, 16, 20, 20, 21, 25, 26, 28, 36, 38

Step 1: Arrange the data in ascending order:

10, 10, 10, 10, 11, 12, 15, 16, 20, 20, 21, 25, 26, 28, 36, 38

Step 2: Find the position of the 25th percentile:

n = 16 (number of data points)

Position = (25/100) * n = (25/100) * 16 = 4

The 25th percentile falls between the 4th and 5th data points, which are both 10.

Step 3: Obtain the position of the 75th percentile:

Position = (75/100) * n = (75/100) * 16 = 12

The 75th percentile falls between the 12th and 13th data points, which are both 25.

Step 4: Calculate the IQR:

IQR = 75th percentile - 25th percentile = 25 - 10 = 15

To know more about interquartile range refer here:

https://brainly.com/question/16311086#

#SPJ11

This table shows how many sophomores and juniors attended two school events.
Jazz band concert Volleyball game Total
Sophomore 35 42 77
Junior 36 24 60
Total 71 66 137
What is the probability that a randomly chosen person from this group is a junior and attended the volleyball game?
Round your answer to two decimal places.
A) 0.44
B) 0.26
C) 0.18
D) 0.48

Answers

The probability that a randomly chosen person from this group is a junior and attended the volleyball game is: 0.18. Option C is correct.

We have,

Probability can be defined as the ratio of favorable outcomes to the total number of events.

Here,

There are a total of 77 + 60 = 137 students in the group.

Out of these students, 24 Junior attended the volleyball game.

So the probability of a randomly chosen person from this group being a Junior and attending the volleyball game is:

P(Junior and volleyball) = 24/137

Therefore, the probability is approximately 0.18. Option C is correct.

Learn more about probability here:

brainly.com/question/14290572

#SPJ12

D Question 9 6 pts BE SURE TO SHOW YOUR CALCULATOR WORK Uh oh! you forgot to study for a 10-question multiple choice test. At least you can guess on the questions. Assume each question has 4 choices to choose from and only 1 correct answer for each. a. Find the probability of guessing and getting exactly 3 correct answers. b. Find the probability of guessing and getting at most 5 questions correct. Edit View Insert Format Tools Table 12pt Paragraph | B IU A 2 T² : ESSE Р 0 words > ****

Answers

a. The probability of guessing and getting exactly 3 correct answers can be calculated using the binomial probability formula:[tex]P(X = k) = C(n, k) \times p^k \times (1 - p)^{(n - k),[/tex] where n is the number of trials (10), k is the number of successes (3), and p is the probability of success (1/4).

b. The probability of guessing and getting at most 5 questions correct can be calculated by summing the probabilities of getting 0, 1, 2, 3, 4, and 5 correct answers using the same binomial probability formula.

To solve this problem, we can use the concept of binomial probability. The probability of guessing a correct answer is 1/4, and the probability of guessing an incorrect answer is 3/4.

a) Finding the probability of guessing and getting exactly 3 correct answers:

In this case, we want to find the probability of getting 3 correct answers out of 10 questions.

We can use the binomial probability formula:

[tex]P(X = k) = C(n, k) \times p^k \times (1 - p)^{(n - k)[/tex]  

Where:

P(X = k) is the probability of getting exactly k successes

C(n, k) is the combination of n items taken k at a time

p is the probability of success (1/4)

n is the number of trials (10)

k is the number of successes (3)

Using the formula, we can calculate:

[tex]P(X = 3) = C(10, 3) \times (1/4)^3 \times (3/4)^{(10 - 3)[/tex]

b) Finding the probability of guessing and getting at most 5 questions correct:

In this case, we want to find the probability of getting 5 or fewer correct answers out of 10 questions.

We can calculate this by summing the probabilities of getting 0, 1, 2, 3, 4, and 5 correct answers:

P(X ≤ 5) = P(X = 0) + P(X = 1) + P(X = 2) + P(X = 3) + P(X = 4) + P(X = 5)

We can use the same formula as in part a to calculate each individual probability and then sum them up.

Remember to substitute the values in the formula and perform the necessary calculations to find the probabilities.

For similar question on probability.

https://brainly.com/question/24756209

#SPJ8

The Central Limit Theorem relates to which of the following conditions?
Nearly Normal Condition
Randomization
10% Condition

Answers

The Central Limit Theorem relates to the Nearly Normal Condition.The Central Limit Theorem is a statistical concept that states that the means of samples taken from any population with a mean μ and variance σ2 will be approximately normal in distribution.

This will hold true for a wide variety of sample sizes, making the theorem an essential tool for statistical analysis.The nearly normal condition, also known as the sampling distribution condition, is one of the requirements for applying the Central Limit Theorem.

This condition specifies that the sample size n must be large enough for the distribution of sample means to be nearly normal with a mean of μ and a standard deviation of σ/√n.In conclusion, the Central Limit Theorem is related to the nearly normal condition, which is one of the conditions that must be satisfied to apply this theorem to statistical analysis.

To know more about population visit :

brainly.com/question/15889243

#SPJ11

suppose relation r(a,b,c) currently has only the tuple (0,0,0), and it must always satisfy the functional dependencies a → b and b → c. which of the following tuples may be inserted into r legally?

Answers

Based on the analysis, the tuples that may be inserted into relation r(a, b, c) legally while satisfying the given functional dependencies are (0, 1, 1) and (1, 1, 1).

To determine which tuples may be inserted into relation r(a, b, c) legally while satisfying the given functional dependencies a → b and b → c, we can check if the tuples preserve the dependencies.

The functional dependencies a → b means that for any value of a, there is a unique value of b associated with it. Similarly, the functional dependency b → c means that for any value of b, there is a unique value of c associated with it.

Given that the relation currently has only the tuple (0, 0, 0), we need to check which tuples can be inserted while maintaining the dependencies.

Let's analyze the options:

(1, 0, 0): This tuple violates the functional dependency a → b, as for a = 1, the associated value of b is 0, not 1. Therefore, this tuple cannot be inserted legally.

(0, 1, 1): This tuple satisfies both functional dependencies. For a = 0, we have b = 1, and for b = 1, we have c = 1. Therefore, this tuple can be inserted legally.

(1, 1, 0): This tuple violates the functional dependency b → c, as for b = 1, the associated value of c is 1, not 0. Therefore, this tuple cannot be inserted legally.

(1, 1, 1): This tuple satisfies both functional dependencies. For a = 1, we have b = 1, and for b = 1, we have c = 1. Therefore, this tuple can be inserted legally.

To know more about functional dependencies,

https://brainly.com/question/31449637

#SPJ11

The tuples that may be legally inserted into relation r is (1, 2, 3). The correct answer is A.

To determine which tuples may be legally inserted into relation r(a, b, c), we need to ensure that the functional dependencies a → b and b → c are satisfied.

The functional dependency a → b means that for each value of a, there can be at most one corresponding value of b. Similarly, the functional dependency b → c means that for each value of b, there can be at most one corresponding value of c.

Let's examine the given tuples to see which ones can be inserted legally:

(1, 2, 3)

Here, a = 1, b = 2, and c = 3. This tuple satisfies both functional dependencies, as there is only one value of b (2) for a = 1, and only one value of c (3) for b = 2. Therefore, this tuple can be inserted legally into relation r.

(1, 2, 4)

Again, a = 1, b = 2, and c = 4. This tuple satisfies both functional dependencies, as there is only one value of b (2) for a = 1, and only one value of c (4) for b = 2. Therefore, this tuple can be inserted legally into relation r.

(1, 3, 5)

In this case, a = 1, b = 3, and c = 5. This tuple satisfies the functional dependency a → b, as there is only one value of b (3) for a = 1. However, it does not satisfy the functional dependency b → c, as there is no value of c associated with b = 3 in the relation. Therefore, this tuple cannot be inserted legally into relation r.

(2, 2, 3)

Here, a = 2, b = 2, and c = 3. This tuple does not satisfy the functional dependency a → b, as there are multiple values of b (2) for a = 2. Therefore, this tuple cannot be inserted legally into relation r.

Based on the analysis, the tuples that may be legally inserted into relation r  is (1, 2, 3). The correct answer is A.

Your question is incomplete but most probably your full question is

Suppose relation R(A,B,C) currently has only the tuple (0,0,0), and it must always satisfy the functional dependencies A → B and B → C. Which of the following tuples may be inserted into R legally?

(1,2,3)

(1,2,0)

(1,0,0)

(1,1,0)

Learn more about tuple at https://brainly.com/question/16944584

#SPJ11

the company manufactures a certain product. 15 pieces are treated to see if they are defects. The probability of failure is 0.21. Calculate the probability that:
a) All defective parts
b) population

Answers

Therefore, the probability that all 15 pieces are defective is approximately [tex]1.89 * 10^{(-9)[/tex].

To calculate the probability in this scenario, we can use the binomial probability formula.

a) Probability of all defective parts:

Since we want to calculate the probability that all 15 pieces are defective, we use the binomial probability formula:

[tex]P(X = k) = ^nC_k * p^k * (1 - p)^{(n - k)[/tex]

In this case, n = 15 (total number of pieces), k = 15 (number of defective pieces), and p = 0.21 (probability of failure).

Plugging in the values, we get:

[tex]P(X = 15) = ^15C_15 * 0.21^15 * (1 - 0.21)^{(15 - 15)[/tex]

Simplifying the equation:

[tex]P(X = 15) = 1 * 0.21^{15} * 0.79^0[/tex]

= [tex]0.21^{15[/tex]

≈ [tex]1.89 x 10^{(-9)[/tex]

To know more about probability,

https://brainly.com/question/15172393

#SPJ11

What statement about measures of central tendency is correct? A The mean is always equal to the median in business data. B. A data set with two values that are tied for the highest number of occurrences has no mode C. If there are 19 data values, the median will have 10 values above it and 9 below it since n is odd. D. If there are 20 data values, the median will be halfway between two data values.

Answers

if the dataset contains ten observations, the median will be the average of the fifth and sixth observations. Hence, the correct option is (C) If there are 19 data values, the median will have 10 values above it and 9 below it since n is odd.

The correct statement about measures of central tendency is: If there are 19 data values, the median will have 10 values above it and 9 below it since n is odd. When we are discussing measures of central tendency, there are three main measures of central tendency: Mean, Median, and Mode.Mean is the sum of values in the data set divided by the number of values in the data set. Median is the middle value in a data set. Mode is the value that appears most frequently in a data set.What is median?The median is the value that is in the center of a dataset when it has been arranged in numerical order. If a dataset has an odd number of data points, the median will be the exact middle value. When there is an even number of data points, the median will be the average of the two values that are in the center of the dataset. That is, if there are 20 data points, the median will be halfway between two data points. For example, if we have {1, 2, 3, 4, 5, 6, 7, 8, 9}, the median is 5. On the other hand, if we have {1, 2, 3, 4, 5, 6, 7, 8, 9, 10}, the median will be halfway between 5 and 6, which is 5.5.How to calculate median?To determine the median, the data must be ordered in numerical sequence. If there is an odd number of observations, the number that is exactly in the middle is the median. For instance, if the dataset contains 9 observations, the median is the fifth value, with four values above and four values below it.If there is an even number of observations, there is no precise middle value, and instead, the median is calculated as the average of the two central values. For example, if the dataset contains ten observations, the median will be the average of the fifth and sixth observations. Hence, the correct option is (C) If there are 19 data values, the median will have 10 values above it and 9 below it since n is odd.

To know more about median visit:

https://brainly.com/question/11237736

#SPJ11

using the factor theorem, which polynomial function has the zeros 4 and 4 – 5i? x3 – 4x2 – 23x 36 x3 – 12x2 73x – 164 x2 – 8x – 5ix 20i 16 x2 – 5ix – 20i – 16

Answers

The polynomial function that has the zeros 4 and 4 - 5i is (x - 4)(x - (4 - 5i))(x - (4 + 5i)).

To find the polynomial function using the factor theorem, we start with the zeros given, which are 4 and 4 - 5i.

The factor theorem states that if a polynomial function has a zero x = a, then (x - a) is a factor of the polynomial.

Since the zeros given are 4 and 4 - 5i, we know that (x - 4) and (x - (4 - 5i)) are factors of the polynomial.

Complex zeros occur in conjugate pairs, so if 4 - 5i is a zero, then its conjugate 4 + 5i is also a zero. Therefore, (x - (4 + 5i)) is also a factor of the polynomial.

Multiplying these factors together, we get the polynomial function: (x - 4)(x - (4 - 5i))(x - (4 + 5i)).

Simplifying the expression, we have: (x - 4)(x - 4 + 5i)(x - 4 - 5i).

Further simplifying, we expand the factors: (x - 4)(x - 4 + 5i)(x - 4 - 5i) = (x - 4)(x^2 - 8x + 16 + 25).

Continuing to simplify, we multiply (x - 4)(x^2 - 8x + 41).

Finally, we expand the remaining factors: x^3 - 8x^2 + 41x - 4x^2 + 32x - 164.

Combining like terms, the polynomial function is x^3 - 12x^2 + 73x - 164.

So, the polynomial function that has the zeros 4 and 4 - 5i is x^3 - 12x^2 + 73x - 164.

For more questions like Polynomial function click the link below:

https://brainly.com/question/11298461

#SPJ11

Grapphing
Give the equation for the function which would have graph shown below. Use f(x) for the output. 8 7 6 5 4 3 -12 -11 -10 -9 -8 -7 -6 -4 6 10 XX 12 -3 -2 2 7 12 3 5 6 7 -8 -9+

Answers

The equation for the function which would have the given graph is:

f(x) = { 2x - 8, for -12 ≤ x ≤ -2}, { 0.5x + 6, for -2 < x ≤ 6}, {-2x + 10, for 6 < x ≤ 12}.

The given graph is shown below:

The graph shows that the function has three separate line segments which means the function may have different equations for different intervals.

Therefore, we can determine the function equation using each line segment.

First interval: The interval is from -12 to -2 with a slope of 2 and y-intercept -8. f(x) = 2x - 8.

Second interval: The interval is from -2 to 6 with a slope of 0.5 and y-intercept 6. f(x) = 0.5x + 6.

Third interval: The interval is from 6 to 12 with a slope of -2 and y-intercept 10. f(x) = -2x + 10.

Thus, the equation for the function which would have the given graph is:

f(x) = { 2x - 8, for -12 ≤ x ≤ -2}, { 0.5x + 6, for -2 < x ≤ 6}, {-2x + 10, for 6 < x ≤ 12}.

To know more about equation visit:

https://brainly.com/question/29538993

#SPJ11

which sequence is modeled by the graph below? (1 point) coordinate plane showing the points 1, 2; 2, 2; 3, 2; 4, 2 an = 2(n − 1)1 an = 2(1)n − 1 an = 2 (1)n − 1 an = (2)(n − 1)

Answers

The sequence modeled by the graph is represented by the formula an = 2.

Looking at the graph and the given points (1, 2), (2, 2), (3, 2), (4, 2), we can observe that the y-coordinate remains constant at 2 for all the corresponding x-coordinates. This indicates that the sequence is a constant sequence where every term has the same value.
Based on the given options, the formula an = 2 is the only one that represents a constant sequence. The other options involve variables or expressions that would result in different values for each term, which is not consistent with the graph.
Therefore, the sequence modeled by the graph is represented by the formula an = 2, indicating that every term in the sequence is equal to 2.
The sequence modeled by the graph is a constant sequence with all terms equal to 2. In the coordinate plane, the points (1, 2), (2, 2), (3, 2), (4, 2) form a horizontal line at y = 2. This indicates that the value of y remains constant at 2 for all values of x. Therefore, the sequence can be described by the formula an = 2, where "an" represents the nth term of the sequence. Regardless of the value of n, the term will always be 2, indicating a constant sequence.

Learn more about sequence here
https://brainly.com/question/30262438



#SPJ11

What is the mean absolute deviation of the following set of data? Do not round your answer

78, 92, 98, 87, 86, 72, 92, 81, 86, 92

Answers

Answer:

mean absolute deviation  = 0

Step-by-step explanation:

First, the mean is:
(78+92+98+87+86+72+92+81+86+92) /10 =864/10 = 86.4

The number of samples is 10

The Mean absolute deviation with samples =

(sum (| each value - the mean |) / (sample size - 1)
the Mean Absolute deviation = (|78-86.4 + 92-86.4 + 98-86.4 + 87-86.4 + 86-86.4 +72- 86.4 + 92-86.4 + 81-86.4 + 86-86.4 + 92-86.4|) / (10-1)

MAD = 0/ 9 = 0

the circle contains (-2, 16) and x intercepts -2 and -32, write the equation of the circle described

Answers

The equation of the circle described by the given information is [tex](x + 2)^2 + (y - 16)^2 = 225.[/tex]

To write the equation of a circle, we need the coordinates of the center and the radius. In this case, we are given the coordinates of a point on the circle and the x-intercepts.

Given:

Point on the circle: (-2, 16)

X-intercepts: -2 and -32

The x-intercepts represent the points where the circle intersects the x-axis. The distance between these points is equal to the diameter of the circle, which is twice the radius.

Radius = (Distance between x-intercepts) /[tex]2 = (-32 - (-2)) / 2 = -30 / 2 = -15[/tex]

Now, we can use the coordinates of the center and the radius to write the equation of the circle in the standard form: [tex](x - h)^2 + (y - k)^2 = r^2[/tex]

Center: (-2, 16)

Radius: -15

Substituting the values into the equation, we get:

[tex](x - (-2))^2 + (y - 16)^2 = (-15)^2[/tex]

Simplifying further:

[tex](x + 2)^2 + (y - 16)^2 = 225[/tex]

for more such questions on equation

https://brainly.com/question/22688504

#SPJ8

Solve the equation for solutions over the interval [0°, 360°). 2 sin 0+1= csc 0

Answers

The second solution sin θ = -1 is not possible within the given interval since the range of sin θ is [-1, 1].Therefore, the solutions over the interval [0°, 360°) are θ = 30° and θ = 150°.

To solve the equation for solutions over the interval [0°, 360°), we can use the trigonometric identity csc θ = 1/sin θ. Now, we can substitute this in the equation and simplify it

.2 sin θ + 1 = csc θ2 sin θ + 1 = 1/sin θ

Multiplying both sides by sin θ, we get

2 sin² θ + sin θ = 12 sin² θ + sin θ - 1 = 0

Now, we can factorize this quadratic equation by finding two numbers that multiply to give -2 and add up to give 1. The numbers are

-2 and +1.2 sin² θ - 2sin θ + 2sin θ - 1 = 0(2sin θ - 1)(sin θ + 1) = 0

Now, we can use the zero-product property and solve for sin

θ.2sin θ - 1 = 0 or sin θ + 1 = 0sin θ = 1/2 or sin θ = -1

However, we need to find the solutions within the given interval [0°, 360°). The first solution sin θ = 1/2 occurs at θ = 30° and θ = 150°.The second solution sin θ = -1 is not possible within the given interval since the range of sin θ is [-1, 1].Therefore, the solutions over the interval [0°, 360°) are θ = 30° and θ = 150°.

To know more about interval visit:

https://brainly.com/question/11051767

#SPJ11

A collection of coins consists of nickels dimes and quarters. There are 4 fewer coins quarters than nickels and 3 fewer dimes than quarters. How many of each kind of coin are in the collection if the total value of the collection is $6. 5

Answers

There are 18 nickels, 11 dimes, and 14 quarters in the collection, and the total value is $6.50.

From the first statement, we know that the number of quarters is 4 less than the number of nickels. So, we can express the number of quarters as: z = x - 4

From the second statement, we know that the number of dimes is 3 less than the number of quarters. So, we can express the number of dimes as: y = z - 3

Now, we can use the information about the total value of the collection to form an equation:

0.05x + 0.10y + 0.25z = 6.5

Substituting the expressions we found for z and y earlier, we get:

0.05x + 0.10(z - 3) + 0.25(x - 4) = 6.5

Simplifying this equation, we get:

0.35x - 0.05z = 7

Substituting z = x - 4, we get:

0.4x - 0.2 = 7

0.4x = 7.2

x = 18

Using z = x - 4, we get:

z = 14

Using y = z - 3, we get:

y = 11

For such more questions on value

https://brainly.com/question/843074

#SPJ8

Juan needs to rewrite this difference as one expression.
(3x/x^-7x+10) – (2x / 3x – 15 )
First he factored the denominators.
(3x / (x-2) (x-5)) – (2x / 3(x-5))
What step should Juan take next when subtracting these expressions?
A. Cancel the factor x from the numerator and the denominator of both fractions.
B. Subtract the numerators.
C. Multiply the second fraction by x – 2 / x – 2
D. Multiply the first fraction by x – 5 / x-5

Answers

The correct answer is B. Subtract the numerators.When subtracting fractions, the general rule is to have a common denominator. In this case, Juan has factored the denominators of both fractions to (x - 2)(x - 5) and 3(x - 5), respectively.

To subtract the fractions, he can now simply subtract the numerators while keeping the common denominator:

(3x / (x - 2)(x - 5)) - (2x / 3(x - 5))

Next, he can subtract the numerators:

(3x - 2x) / (x - 2)(x - 5)

Simplifying the numerator gives:

x / (x - 2)(x - 5)

Therefore, Juan can rewrite the difference as the expression x / (x - 2)(x - 5) by subtracting the numerators and keeping the common denominator.

To know more about expression visit-

brainly.com/question/11545282

#SPJ11

Consider the function f(x) = over the interval [0, 1]. Does the extreme value theorem guarantee the existence of sin(플) an absolute maximum and minimum for f on this interval? Select the correct answer below: Yes O No

Answers

The correct answer for the given question is Yes.

Consider the function f(x) = over the interval [0, 1]. Does the extreme value theorem guarantee the existence of sin(플) an absolute maximum and minimum for f on this interval? Select the correct answer below: Yes O No

The Extreme Value Theorem (EVT) guarantees the existence of an absolute minimum and maximum for a continuous function f(x) on a closed interval [a, b].

Here f(x) = sin(πx) on the interval [0, 1].

Thus, the EVT guarantees the existence of an absolute maximum and an absolute minimum for the given function f(x) over the interval [0, 1].

Therefore, the correct answer for the given question is Yes.

To know more on interval visit:

https://brainly.com/question/30460486

 #SPJ11

Parametrization of curves: 1. Eliminate the parameter to find a Cartesian equation of the curves: (a) x = et, y = e-2t-3 C) Find an equation of the tangent to the curve at the point corresponding to the given --< t < 플 1 + sec (t), (b) x = tan"(t), y 2 value of the parameter. x_tcos(t),y.= tsin(t); t=π. 2 when x - t+t and y - e + 1. For which values of t is the curve d) Findand concave upwards? what point(s) on the curve x 3t +1, y t 1 does the tangent line has slope e At /2?

Answers

(a) To eliminate the parameter t, we can solve the first equation for t and substitute it into the second equation:

From the equation [tex]x = et[/tex], we can take the natural logarithm of both sides to get:

[tex]\ln(x) = \ln(et) = t[/tex]

Substituting this value of t into the equation [tex]y = e^{-2t} - 3[/tex], we have:

[tex]y = e^{-2\ln(x)} - 3 = x^{-2} - 3[/tex]

Therefore, the Cartesian equation of the curve is [tex]y = x^{-2} - 3[/tex].

(b) To find the equation of the tangent to the curve at the point corresponding to the given value of the parameter t, we need to find the derivative of the curve and evaluate it at t.

Given the parametric equations:

[tex]x = tan(t)\\y = 2t[/tex]

Differentiating both equations with respect to t:

[tex]\frac{dx}{dt} = \sec^2(t)\\\\\frac{dy}{dt} = 2[/tex]

The derivative of y with respect to x is given by [tex]\frac{dy}{dx}[/tex], which can be calculated by dividing [tex]\frac{dy}{dt}[/tex] by [tex]\frac{dx}{dt}[/tex]:

[tex]\frac{dy}{dx} = \frac{\frac{dy}{dt}}{\frac{dx}{dt}} = \frac{2}{\sec^2(t)} = 2\cos^2(t)[/tex]

Evaluating this expression at [tex]t = \frac{\pi }{2}[/tex]:

[tex]\frac{dy}{dx} = 2\cos^2\left(\frac{\pi}{2}\right) = 2(0) = 0[/tex]

Therefore, the equation of the tangent to the curve at [tex]t = \frac{\pi }{2}[/tex] is y = 0.

(c) To determine if the curve is concave upwards, we need to find the second derivative of y with respect to x. If the second derivative is positive, the curve is concave upwards.

Taking the derivative of [tex]\frac{dy}{dx} = 2\cos^2(t)[/tex] with respect to t:

[tex]\frac{d^2y}{dx^2} = \frac{d}{dt}(2\cos^2(t)) = -4\sin(t)\cos(t)[/tex]

Evaluating this expression at t = π:

[tex]\frac{d^2y}{dx^2} = -4\sin(\pi)\cos(\pi) = -4(0)(-1) = 0[/tex]

Since the second derivative is zero, we cannot determine the concavity of the curve at t = π.

(d) To find the point(s) on the curve where the tangent line has slope [tex]e^{\frac{1}{2}}[/tex], we need to find the values of t that satisfy the equation [tex]\frac{dy}{dx} = e^{\frac{1}{2}}[/tex].

Using the expression we found for [tex]\frac{dy}{dx}[/tex]:

[tex]2\cos^2(t) = e^{\frac{1}{2}}[/tex]

Taking the square root of both sides:

[tex]\cos(t) = \pm\sqrt{e^{\frac{1}{2}}} = \pm e^{\frac{1}{4}}[/tex]

Taking the inverse cosine of both sides:

[tex]t = \pm\arccos\left(e^{\frac{1}{4}}\right)[/tex]

(e) Without the specific equation or values for x and y, it is not possible to determine the temperature or compare it to the actual value. Please provide additional information for a more accurate analysis.

To know more about Expression visit-

brainly.com/question/14083225

#SPJ11

Other Questions
robin likes working with numbers and is interested in joining a large organization with a clearly defined career path. Please help me answer to the bestof your abilities.Part 1 OverallCompetenciesPlease describe how you have demonstrated the competencies listedbelow in ONE paragraph including ONE example for eac you would like to invest in the following project.yearcash Flow0-$550001$300002$37000Victoria, your boss, insists that only project that can return at least $ 1.10 in today's dollars for every $1 invested can be accepted. She also insists on applying a 10% discount rate to all cash flows. based on these criteria, you should: e court is best characterized as a federal court. an appellate court. a judicial court. a inferior court. A competitive environment is conducive to industry members earning attractive profits when Copyright by Glo-Bus Software, thc Copying, distributing, or 3rd party website posting isepressly prohibited and constitutes copyright violation O the products/services of industry members are weakly differentiated and a surge in buyer demand creates a "buyers' market." Othere is weak to moderate rivalry among sellers, entry barriers are high, competition from substitute products is weak, and both suppliers and customers have little bargaining leverage. industry driving forces are weak, there are fewer than five key success factors, and buyer demand is growing at a moderate to rapid pace. Othere strong rivalry among sellers, low entry barriers, strong competition from substitute products, and considerable bargaining leverage on the part of both suppliers and customers. O industry members are not under strong pressure to drive down costs, advertising expenditures are relatively small, and the numbers of buyers is quite large. this is for cultural diversity! I could not find that tab onhereDo you think that talking about race and racial injustice,(either past and/or present) is necessary in order to promotechange and aw determine the mean and variance of the random variable with the following probability mass function. f(x)=(8/7)(1/2)x, x=1,2,3 round your answers to three decimal places (e.g. 98.765). When the interest rate falls, the A) total amount of money demanded/increases. B) transactions demand for money increases. C) asset demand for money decreases. Dtotal amount of money demanded decreases. Why would good quality second-hand cars withdraw from the market? Use economic theory to discuss this. A fair coin is flipped 5 times. Determine the following probabilities:(a) The probability 4 heads are flipped followed by a tail.(b) The probability of flipping 4 heads and 1 tail in ANY order.(c) The probability of flipping 3 heads and 2 tails in ANY order.8. Repeat the previous problem using an unfair coin : the probabilities of heads and tails are 0.52 and 0.48, respectively. Based on past experience, a bank believes that 12% of the people who receive loans will not make payments on time. The bank has recently approved 500 loans. Answer the following questions. a) What are the mean and standard deviation of the proportion of clients in this group who may not make timely payments? + (O) = 0.12 SD (P) = 0.015 (Round to three decimal places as needed.) b) What assumptions underlie your model? Are the conditions met? A. With reasonable assumptions about the sample, all the conditions are met. OB. The 10% condition is not met. O C. The randomization and success/failure conditions are not met. OD. The success/failure condition is not met. O E. The randomization condition is not met. Based on past experience, a bank believes that 12% of the people who receive loans will not make payments on time. The bank has recently approved 500 loans. Answer the following questions. Tuo Turuvimicurvu unu vuvvvvurunur vonUILIVIT un Tum OD. The success/failure condition is not met. O E. The randomization condition is not met. OF. The randomization and 10% conditions are not met. O G. The 10% and success/failure conditions are not met. O H. Without unreasonable assumptions, none of the conditions are met. c) What is the probability that over 13% of these clients will not make timely payments? pl>0.13) =((Round to three decimal places as needed.) The following Book class is used to represent books and print information about each book. Each Book object has attributes for the book title and for the name of the book's author. public class Book private String title; private String author; public Book (String t, String a) title = t; author = a; public void printBookInfo() System.out.print(title + ", written by " + author); (a) The PictureBook class is a subclass of the Book class that has one additional attribute: a String variable named illustrator that is used to represent the name of the illustrator of a picture book. The PictureBook class also contains a printBookInfo method to print the title, writer, and illustrator of a picture book. Consider the following code segment. PictureBook myBook = new PictureBook ("Peter and Wendy", "J.M. Barrie", "F.D. Bedford"); myBook.printBookInfo(); The code segment is intended to print the following output. Peter and Wendy, written by J.M. Barrie and illustrated by F.D. Bedford Complete the PictureBook class below. Your implementation should conform to the example above. public class PictureBook extends Book (write your class using pencil in a separate page) Unit 9 Inheritance and Polymorphism FRQ (a) (b) (c) Consider the following books. A book titled Frankenstein, written by Mary Shelley A picture book titled The Wonderful Wizard of Oz, written by L. Frank Baum and illustrated by W.W. Denslow The following code segment is intended to represent the two books described above as objects bookl and book2, respectively, and add them to the ArrayList myLibrary. ArrayList myLibrary = new ArrayList(); /* missing code */ myLibrary.add(bookl); my Library.add(book2); (b) Write a code segment that can be used to replace /* missing code */ so that bookl and book 2 will be correctly created and added to my Library. Assume that class PictureBook works as intended, regardless of what you wrote in part (a). (write your code segment using pencil in a separate page) The BookListing class is used to generate a descriptive listing for a book. The BookListing constructor takes a Book object and a double value as parameters and uses them to print information about the book, along with its price. Assume that book1 and book2 were created as specified in part (b). The following table demonstrates the intended behavior of the BookListing class using objects book1 and book2. Code Segment Result Printed BookListing listing1 = new BookListing (book1, 10.99); Frankenstein, written by Mary Shelley, $10.99 listingl.printDescription(); BookListing listing2 = new BookListing (book2, 12.99); The Wonderful Wizard of Oz, written by L. Frank Baum and illustrated by W.W. Denslow, $12.99 listing2.print Description(); (c) Complete the BookListing class below. Your implementation should conform to the examples. Assume that class PictureBook works as intended, regardless of what you wrote in part (a). public class BookListing (write your class using pencil in a separate page) the stockholders equity section of the balance sheet includes which of the following accounts?' Consider an array of integers. Write the pseudocode for either the selection sort, insertion sort, or bubble sort algorithm. Include loop invariants in your pseudocode. Create a Loom video in which you present your algorithm. A price control policy will benefit some players in the economy while hurting others, but the gain to the winners will be larger than the cost to the losers. Select one: O True O False What is the present value of $7,000 paid at the end of each of the next 91 years if the interest rate is 9% per year? The present value is $ (Round to the nearest cent.) A mixture of hydrogen and iodine, each at 55 KPa and hydrogen iodide at 78 KPa was introduced into a container heated at 783 K. At this temperature K= 46 for the following reaction: H2 (g)+l2 (g) = HI (g) a.Q< K; HI will decompose into H and l2 b.Q>K; HI will be formed c.Q K; HI will decompose into H2 and l2 At a recent presentation, your companys CEO stated the companys intent to expand into the service sector. Currently, your company is devoted exclusively to manufacturing. Of particular interest to your supervisor, were the following statement: "In all likelihood, we will use some of our own product designers for service design. After all, they known our products and besides, product design and service design are pretty much the same". In less than 150 words, how would you respond to your supervisor indicating the circumstances under which this proposal might work and those under which it might not work. Explain "Perfectly Incomplete Design" as a perspective fordesigning Smart City more effectively in the perspective of Policyand Management? what is the maximum acceptable receiving temperature for fresh beef?