Drop (grade control) structure is used to stop head cutting. The main objective of a drop structure is to reduce erosion by maintaining a constant flow velocity in the channel, this is achieved by creating a hydraulic jump, which in turn dissipates energy that prevents head cutting.
A hydraulic jump is a type of drop structure that slows down fast-moving water, it is designed to dissipate energy, so that when the water flows to a lower gradient or elevation, it will not cut into the stream bed. This, in turn, helps to prevent soil erosion, which would negatively affect nearby habitats.
Drop structures are also used to impound water, they can be used to create a raised pond, small lake, or other water features that help with water conservation and management.
The impoundment of water can help to create a consistent water supply for irrigation, and it can also help with the control of flooding. They can also protect bridges, however, that is not the main objective of drop structures.
To know more about velocity visit:-
https://brainly.com/question/30559316
#SPJ11
Ordering is the first step of materials management
True
False
Ordering is the first step of materials management. This statement is not accurate. Ordering is not the first step of materials management. It is a fundamental component of the procurement process, which involves obtaining the goods and services needed for business purposes.
:1. Planning and controlling: This is the first stage of materials management. It includes determining the quantity of materials needed, forecasting future demand, and creating a plan for material acquisition and distribution.2. Purchasing: This stage entails placing orders for goods and services from suppliers or vendors. It includes selecting the right supplier, agreeing on terms and conditions, and managing the procurement process.3. Inventory management: This stage entails tracking and managing inventory levels to ensure that materials are available when needed. This includes setting inventory targets, monitoring inventory levels, and ordering materials when they fall below the minimum threshold.4. Receiving and inspection: This stage involves receiving the goods and services, inspecting them to ensure that they meet quality standards, and accepting or rejecting them as necessary.5. Warehousing and storage: This stage includes storing and maintaining inventory in a safe, secure, and organized manner.
It involves managing the layout of the warehouse, labeling and tracking inventory, and maintaining safety standards.6. Material handling and transportation: This stage entails moving materials from one location to another within the warehouse or between different locations. It involves managing the flow of materials, selecting appropriate transportation methods, and ensuring that materials are transported safely and efficiently.In conclusion, the statement "Ordering is the first step of materials management" is False. The first step is the planning and controlling stage.
To know more about business purposes visit:
brainly.com/question/23125708
#SPJ11
In a triaxial test a soil specimen was consolidated under a cell pressure of 100 kPa and a back pressure of 63 kPa. Then, under undrained conditions, the cell pressure was raised to 200 kPa resulting in a pore water pressure reading of 160 kPa; then (with the cell pressure remaining at 200 kPa) axial load was applied to give a deviator stress of 428 kPa and a pore water pressure reading of 367 kPa. Calculate the values of the pore pressure coefficients B, A and B. (B=0.97, A = 0.48 and B = 0.58
The triaxial test is a geotechnical engineering laboratory test that helps in determining the shear strength parameters of soil. It can also be used to determine the stress-strain relationship for different types of soils.
the soil specimen was consolidated under a cell pressure of 100 kPa and a back pressure of 63 kPa, then under undrained conditions, the cell pressure was raised to 200 kPa resulting in a pore water pressure reading of 160 kPa, and then axial load was applied to give a deviator stress of 428 kPa and a pore water pressure reading of 367 kPa. T
A is known as the pore pressure parameter. It is the ratio of the change in pore pressure to the change in total stress and ranges from 0 to 1.
[tex]A = ∆u / ∆σ[/tex]where ∆u is the change in pore water pressure and ∆σ is the change in total stress.
Calculating the values of the pore pressure coefficients:
[tex]∆σ = 200 kPa - 100 kPa = 100 kPa∆σ' = 200 kPa - 160 kPa = 40 kPa[/tex]
[tex]∆u = 367 kPa - 160 kPa = 207 kPaB = ∆σ' / ∆σ = 40 / 100 = 0.4A = ∆u / ∆σ = 207 / 100 = 2.07B = σ'h / σ'vσ'v = (100 + 63) / 2 = 81.5 kPaσ[/tex]
'[tex]h = 428 / 2 = 214 kPaB = σ'h / σ'v = 214 / 81.5 = 2.63[/tex]
the values of the pore pressure coefficients are: [tex]B = 0.4A = 2.07B = 2.63[/tex]
The values of the pore pressure coefficients are given as [tex]B = 0.97, A = 0.48, and B = 0.58.[/tex]
To know more about triaxial test visit:-
https://brainly.com/question/29745270
#SPJ11
For a given data, calculate the net present value: Initial Investment: $100,000; Project Life: $ 25,000; Annual Receipts: 16 years; Salvage Value: $ 45,000; Annual
Disbursements: $ 25,000; Annual Discount Rate: 12%
Net parent value (NPV) is a financial measure that calculates the difference between the present value of cash inflows and outflows produced by a project or investment over a certain time period using a discounted cash analysis.
The following data given below:Initial Investment: $100,000Annual Receipts: $25,000Project Life: 16 yearsSalvage Value: $45,000Annual Disbursements [tex]$25,000Ann:ual Discount $25,000Year 9 = $25,000Year 10 = $25,000Year 11 $25,000Year 16 = $25,000 + $45,000 = $70,000To calculate the present value of the annual cash flows.[/tex]
We use the following formula:Present Value = Annual Cash Flow / (1 + Discount Rate) ^ YearFor example, in Year 1, the Present Value of the Annual Cash Flow is:Present Value of $25,000 in Year 1 = $25,000 / (1 + 0.12) ^ 1 = $22,321.43Similarly, we can calculate the Present Value of Annual Cash Flows for Years 2-16 using the same formula.
To know more about parent visit:
https://brainly.com/question/12602933?
#SPJ11
At an approach of a signalized intersection, vehicles can be discharged at a saturation
headway of 2 seconds per vehicle. When green signal comes to this approach, start-uplost time is about 4 seconds. How many vehicles can be discharged in 20 seconds
after the onset of green?
Given that vehicles can be discharged at a saturation headway of 2 seconds per vehicle and the start-up lost time is about 4 seconds. We need to determine the number of vehicles that can be discharged in 20 seconds after the onset of green. Let the number of vehicles discharged in 20 seconds be n.
Therefore, the time taken for each vehicle to pass through the intersection (including the start-up lost time) = 2 + 4 = 6 seconds. The number of vehicles that can pass through the intersection in 20 seconds after the onset of green = 20 / 6 = 3.33 vehicles As we know that the number of vehicles must be a whole number, we can take the floor value of 3.33 vehicles.
3: Signalized intersections are junctions or crossings where vehicles have to stop or slow down when the signal is red. Green signals allow for the smooth flow of vehicles. In heavily populated areas, it is essential to manage traffic to reduce the risk of accidents and ensure the proper flow of vehicles through the intersection.
The start-up lost time is the time lost in starting a vehicle from rest to movement. When the green signal turns on, the vehicle needs a minimum of four seconds to start moving. Therefore, in this scenario, the time taken for each vehicle to pass through the intersection is 6 seconds (2 + 4).Therefore, the number of vehicles that can pass through the intersection in 20 seconds after the onset of green is 3. This implies that the intersection is efficient and can handle 3 vehicles per green light.
To know more about discharged visit:
brainly.com/question/32286813
#SPJ11
With the aid of a diagram, discuss the development of the boundary layer on a flat plate with zero pressure gradient. Comment, in particular, on the concept of 'Critical Reynolds number' and the change in character of the boundary layer velocity profile after transition.
The boundary layer is defined as the thin layer of fluid, close to the boundary surface, where the fluid velocity changes from zero at the surface to the free stream velocity outside the boundary layer.
The thickness of the boundary layer increases with increasing distance along the plate, and the velocity within the boundary layer reduces compared to the free stream velocity. The boundary layer formation on a flat plate is highly influenced by the Reynolds number which is defined as the ratio of inertial forces to viscous forces. As the Reynolds number increases, the boundary layer becomes thinner and vice versa.
The flow is characterized by a laminar flow velocity profile until the Reynolds number reaches the critical value. As the Reynolds number increases beyond this value, the velocity profile becomes distorted with the formation of eddies and turbulence. This leads to an increase in the boundary layer thickness, which results in an increase in the skin friction drag.
As the Reynolds number increases, the boundary layer thickness decreases until the critical value is reached, where the boundary layer changes from laminar to turbulent. After the transition, the velocity profile changes from a laminar flow velocity profile to a turbulent flow velocity profile. The turbulent boundary layer has a higher shear stress and higher skin friction drag than the laminar boundary layer.
To know more about viscous forces visit:-
https://brainly.com/question/25832132
#SPJ11
There are 10 solar panels, and the following information is about them. The solar panels are expected to produce 2250 full load hours per year, the investment cost is 172 million dollars, and it is expected that the maintenance cost is 80 $/MWh. The production from the solar panels is expected to be 0.38 $/kWh. The lifetime of the solar panels is 20 years, with a discount rate of 4%.
Calculate NPV for the investment
Calculate the IRR
The IRR for the investment is 15.56%.
To calculate the Net Present Value (NPV) for the investment, we need to determine the cash flows associated with the investment over its lifetime and discount them to present value. Here's the step-by-step calculation:
Calculate the annual revenue from the solar panels:
Annual revenue = Production per year (2250 full load hours/year) * Price per kWh (0.38 $/kWh) * Number of solar panels (10)
Annual revenue = 2250 * 0.38 * 10 = $8550
Calculate the annual maintenance cost:
Annual maintenance cost = Maintenance cost per MWh (80 $/MWh) * Production per year (2250 full load hours/year) / 1000
Annual maintenance cost = 80 * 2250 / 1000 = $180
Calculate the annual cash flow:
Annual cash flow = Annual revenue - Annual maintenance cost
Annual cash flow = $8550 - $180 = $8370
Determine the discount factor for each year:
Discount factor = 1 / (1 + Discount rate)^Year
Discount factor = 1 / (1 + 0.04)^Year
Calculate the discounted cash flow for each year:
Discounted cash flow = Annual cash flow * Discount factor
Sum up the discounted cash flows over the 20-year lifetime to calculate the NPV:
NPV = Sum of discounted cash flows - Initial investment cost
Learn more about investment here :-
https://brainly.com/question/15105766
#SPJ11
What would be the steady-state analog output of the system, ya(t)?
Give an analytical expression (some kind of cos( ) ) for the output signal ya(t); not a Matlab plot. Use your analytical expressions for H(F) to find the system response to this cos( ) signal and from that determine the analog output. Assume a sample rate S = 16 KHz and ideal A/D and D/A conversions.
The analytical expression for the output signal ya(t) would be:
ya(t) = (A/2) [cos((F + t)θ) + cos((F - t)θ)]
Let's assume that the transfer function of the system is represented as H(F), where F represents the frequency.
We can express the input cosine signal as cos(2πFt), where t represents time.
The output signal ya(t) can be obtained by multiplying the input signal with the system's transfer function H(F) in the frequency domain. Mathematically, this can be represented as:
Ya(F) = H(F) x Cos(Ft)
Let's assume that at the frequency F, the transfer function H(F) can be represented as H(F) = A x cos(θ),
where A represents the magnitude and θ represents the phase shift.
Substituting this into the equation, we get:
Ya(F) = A x cos(θ) x cos(Ft)
Using the trigonometric identity
cos(A) cos(B) = (1/2) [cos(A + B) + cos(A - B)]
Ya(F) = (A/2) [cos((F + t)θ) + cos((F - t)θ)]
Therefore, the analytical expression for the output signal ya(t) would be:
ya(t) = (A/2) [cos((F + t)θ) + cos((F - t)θ)]
Learn more about trigonometric identity here:
https://brainly.com/question/12537661
#SPJ4
(b) In your opinion, if you found that a project is not viable due to the unfavourable cost analysis outcome, what recommendations will you write in your report to your superior?
If a project is found not to be viable due to an unfavorable cost analysis outcome, certain recommendations could be made. The recommendations could include, but are not limited to, the following:
1. Reconsidering the project's scope: If a project is deemed too expensive, it is possible that its scope is too broad or ambitious. As a result, revising the project's scope to a more reasonable level could help to reduce the overall costs while still achieving the project's primary goals.
2. Finding additional sources of funding: If the project's cost is the only barrier to its viability, it may be possible to seek additional sources of funding from outside sources. This might involve approaching investors or applying for grants from public or private organizations.
3. Exploring alternative options: If the project is not viable due to its high cost, it may be necessary to explore other options. This might involve looking for alternative approaches that are less costly while still achieving the desired outcomes.
4. Taking a phased approach: Instead of attempting to complete the entire project at once, it may be more feasible to break it down into smaller, more manageable phases. This will allow you to test the project's feasibility on a smaller scale before committing more resources to it.
The above four recommendations can be included in a report to a superior explaining why a project is not viable due to an unfavorable cost analysis outcome.
To know more about barrier visit:-
https://brainly.com/question/13712242
#SPJ11
Due to its extremely high settlement and low bearing capacity, the construction of embankment on soft soil is extremely difficult. Several issues and failures have occurred during and after the construction of a soft-soil embankment in Malaysia. Propose the optimal strategy for soil improvement and embankment construction in Malaysia to reduce embankment failures.
Embankment construction on soft soil is a daunting task because of the soil's low bearing capacity and high settlement. Several problems and failures have arisen during and after the construction of a soft-soil embankment in Malaysia.
A method known as jet grouting is another option for improving soft soil. It is a soil stabilization method that uses high-pressure water and grout to create a column of grouted soil. The soil is liquefied by high-pressure water, and grout is injected into the soil, which is then mixed and allowed to solidify.
The technique can be used to create a foundation in weak soils. It is also a cost-effective method that can be used for embankment construction in Malaysia. Limiting the height and slope of the embankment is another strategy to consider. Reducing the height and slope of an embankment reduces the load that it has to bear, which minimizes the settlement.
The optimal strategy for soil improvement and embankment construction in Malaysia to reduce embankment failures is to use reinforcement techniques like soil nailing and jet grouting, limiting the height and slope of the embankment, and carrying out thorough site investigations to assess the soil characteristics and potential risks.
To know more about embankment visit:-
https://brainly.com/question/11927678
#SPJ11
Design a reinforced concrete column with squared shape cross
section assuming Pu=300 kip and
Mu=150 . yy= 60,000 psi and cc′= 4000psi, normal weight
concrete.
In the reinforced concrete column with squared shape cross-section, the column is subjected to both axial load and bending moment.
The values of axial load and bending moment in the column are given as Pu = 300 kip and Mu = 150 kip-ft .The material properties of concrete and steel are given as cc′= 4000 psi and yy = 60,000 psi respectively
[tex]P = Pu / ΦP[/tex] Where, ΦP = 0.65 for Axial Loads. Therefore, P = 300 kip / 0.65 = 461.54 kip2.
Calculation of Moment Capacity: Moment capacity is calculated using the equation given below;
[tex]M_n = f_y * A_s * d * (1 – (0.5 * β_1 * β_2)) + f_c′ * A_c * (d – a/2)[/tex]
[tex]A_c = a^2 = (Assuming a = b) = (150 / 12)^2 = 156.25 in^2[/tex]
The effective depth of the section is calculated by;
[tex]d = sqrt((M_u * 12) / (0.9 * f_c′ * A_c)) = sqrt((150 * 12 * 12) / (0.9 * 4000 * 156.25)) = 16.76 in.[/tex]
[tex]A_s / 2 = 0.008 in^2[/tex]
The size of the column is[tex]12" x 12"[/tex], and the length of the column is not provided.
The provided column design is satisfactory for a specified load. It is also important to note that the capacity of the column is sufficient to resist the imposed load.
To know more about satisfactory visit:-
https://brainly.com/question/30308117
#SPJ11
What is the minimum width of a square footing needed to support a total service load (i.e.
The minimum width of a square footing needed to support a total service load (i.e. the load of the structure plus the weight of any attached fixtures) depends on several factors, including the soil's bearing capacity, the building's weight, and the type of foundation.
For Clay Soil: [tex]Bmin = [(q / Pbearing) / 1.25] ^ 0.5[/tex]For Sandy Soil:[tex]Bmin = [(q / Pbearing) / 1.5] ^ 0.5[/tex]Where, q is the total service load per unit area, Pbearing is the allowable soil bearing capacity, and Bmin is the minimum footing width required.
The minimum footing width for a particular soil type can also be calculated using Table 1 of the International Residential Code (IRC). According to the IRC, the minimum footing width for a concrete or masonry foundation must be at least 12 inches (305 mm) wider than the foundation wall it supports. For example, if the foundation wall is 8 inches (203 mm) wide, the minimum footing width would be 20 inches (508 mm).
This rule of thumb ensures that the footing is wide enough to distribute the load over a sufficient area of soil to prevent settling or foundation failure. A wider footing can be used if the load is higher or the soil is weaker than the minimum requirements.
To know more about International Residential Code visit:-
https://brainly.com/question/32894738
#SPJ11
A light cream butter product containing 8% fat is to be produced by mixing homogenized milk which contains 3% fat with cream containing 22% fat
Determine the percentage of milk at the end cream in butter product
The percentage of milk in the butter product is approximately 42.1%.
Let the percentage of milk be x:
Amount of fat in the milk = 3%
Amount of fat in the cream = 22%
Let the volume of milk used be V_m, the volume of cream used be V_c, and the volume of the butter product be V_b:
It is given that the light cream butter product contains 8% fat, which means:
8% = (V_m x 3% + V_c x 22%) / V_b
8% = (x/100) × 3% + (100-x)/100 × 22%
Multiplying through by 100, we get:
8 = 3x + 2200 - 22x + 8x = 19x
x = 42.1
The percentage of milk at the end cream in the butter product is approximately 42.1%.
Therefore, the required percentage of milk in the butter product is approximately 42.1%.
Answer: The percentage of milk in the butter product is approximately 42.1%.
Learn more about butter product
https://brainly.com/question/15573980
#SPJ11
The minimum amount of steel for one-way slab C with thickness h= 150 mm, f' = 28 MPa and f = 420 MPa (Grade 60) is: Select one: a. 220 2 mm/m 2 O b. 270 mm/m c. 240 2 mm/m 2 d. 290 mm/m
The correct answer is 240 2 mm/m2. The minimum amount of steel for one-way slab C with thickness h= 150 mm, f' = 28 MPa and f = 420 MPa (Grade 60) is 240 2 mm/m2.
The minimum amount of steel required for one-way slab is greater than 100. So, option (c) is correct.How to determine minimum amount of steel for a one-way slab?A minimum amount of steel is required for one-way slabs to ensure adequate structural strength.
The following is the process for calculating the minimum amount of steel required for a one-way slab:C = Cmin + Cfwhere,Cmin = 0.26(100A/Ast) (fy/f'c)^0.5Cf = 0.15(Ast/f'c)Here,Ast = area of tension reinforcement,fy = yield strength of tension reinforcement,f'c = compressive strength of concrete.
To know more about correct visit:
https://brainly.com/question/24532377
#SPJ11
I want to know about engines
Engines are mechanical devices that convert various forms of energy, such as chemical, thermal, or electrical energy, into mechanical work. They are commonly used in vehicles, machinery, and power generation systems.
Engines come in different types, including internal combustion engines (such as gasoline and diesel engines), steam engines, and electric motors. They play a crucial role in powering transportation and providing mechanical power for a wide range of applications.
Engines work based on the principle of converting energy from one form to another. In internal combustion engines, fuel is burned within the engine, creating high-pressure gases that push against pistons, generating mechanical work. This work is then used to power the vehicle or machinery. Steam engines, on the other hand, use the energy from steam to drive pistons or turbines. Electric motors convert electrical energy into mechanical energy using electromagnetic principles.Engines vary in size, complexity, and efficiency depending on their intended application. They require fuel or energy input and typically involve various components such as cylinders, pistons, valves, crankshafts, and cooling systems. Engine efficiency is an important consideration, as it determines how effectively the engine converts input energy into useful work while minimizing energy losses and waste heat.Advancements in engine technology continue to improve efficiency, reduce emissions, and explore alternative fuel sources to address environmental concerns and promote sustainability. Overall, engines are vital devices that power various industries and contribute to modern society's transportation and power needs.
For more questions on Engines
https://brainly.com/question/1232655
#SPJ8
A piple is carrying water under steady flow condition. At end point 1, the pipe diameter is 1.2 m and velocity is (48+ 30) mm/h. At other end called point 2, the pipe diameter is 1.1 m, calculate velocity in m/s at this end.
A pipe is carrying water under steady flow conditions. At end point 1, the pipe diameter is 1.2 m, and the velocity is (48+30) mm/h. called point 2, the pipe diameter is 1.1 m.
We need to calculate the velocity in m/s at this end
[tex]Q = A1V1 = A2V2[/tex],where Q is the flow rate, A1 and A2 are the cross-sectional areas of the pipe at point 1 and point 2, respectively, and V1 and V2 are the velocities at point 1 and point 2,
Firstly, we will calculate the cross-sectional area of the pipe at point 1: Area at point 1 = [tex]π(1.2/2)²= 1.131 m²[/tex]
Now, we can calculate the flow rate at point 1:[tex]Q = A1V1(48+30) × 10⁻³ = 1.131 × V1V1 = (78/1.131) m/s = 68.89 m/s[/tex](approx)Next, we can calculate the cross-sectional area of the pipe at point 2:Area at point 2 = [tex]π(1.1/2)²= 0.95 m²[/tex]
Finally, we can use the continuity equation to find the velocity at point 2:[tex]Q = A1V1 = A2V2V2 = Q/A2= (48+30) × 10⁻³ / 0.95= 0.089 m/s[/tex]
Therefore, the velocity in m/s at point 2 is 0.089 m/s.
To know more about diameter visit:-
https://brainly.com/question/32968193
#SPJ11
A round column is to be designed with DL = 600 KN, LL = 800 KN, fc' = 20.7 MPa, fy = 345 MPa. Use Pg = 0.02,25 mm main bars, Øand 10 mm Ø ties.
The given loads are as follows: DL = 600 KN,LL = 800 KN The formula for computing the axial load capacity of the round column is given as: Pu = π²E I / L²Here, Pu is the ultimate load capacity.
The column E is the modulus of elasticity of the concreteI is the moment of inertia of the column L is the effective length of the column For round columns, I is given as:I = (π D⁴) / 64, where D is the diameter of the column We have, D = 400 mm.∴[tex]I = (π × (400)⁴) / 64 = 8.40 × 10¹⁰ mm⁴[/tex] The effective length of the column (Le) is found.
The effective length factor Ls is the unsupported length of the column Since the column is fixed at both ends, K = 0.7Ls is the distance between the two points of zero moments. For an end condition of fixed, Ls = 2 D = 800 mm.∴ Le = 0.7 × 800 = 560 mm The axial load carrying capacity of the column.
To know more about loads visit:
https://brainly.com/question/16826688
#SPJ11
The Superfund program draws from a trust fund by a former tax on feedstock, chemicals, crude oil, and corporate income. The levy expired in 1995. The trust fund reached its peak of $4.7 billion in 1997 and fell to $225 million in 2020.
Who should pay for the Superfund?
What are the long term ramifications of under funding the program?
a debate on who should fund the Superfund program. On one hand, polluters are responsible for the pollution and contamination that require remediation, thus should fund the program.
On the other hand, the Superfund was established as a public good, which means that taxpayers should bear the cost. When the Superfund was first established in 1980, it was funded by a tax on feedstock, chemicals, crude oil, and corporate income, but that levy expired in 1995. Since then, the program has relied on appropriations from Congress to supplement the trust fund.What are the long term ramifications of under funding the program?Underfunding the Superfund program can have serious long-term ramifications. For instance, it can result in a slower pace of cleanup or abandonment of cleanup altogether, which can lead to public health risks, environmental degradation, and economic losses. Contaminated sites may remain unaddressed for years,
which could create legal challenges, lower property values, and have a negative impact on local economies. Furthermore, underfunding the program could increase the liability of responsible parties, which could lead to lengthy and costly litigation.
To know more about responsible visit:
brainly.com/question/28903029
#SPJ11
Explain, in detail, how you would plan to obtain your LEED credentials within the next three years: 2021, 2022, and 2023. This plan will be in a horizontal bar chart format that will outline what you will do in each year towards completing your LEED credentials.
I will provide a general plan to earn a LEED Green Associate credential over the next three years. 2021: First yearThe first year will be focused on gaining knowledge of LEED concepts and understanding the exam structure and content.
Purchase the LEED Green Associate study guide from a reputable source. Register for a LEED Green Associate exam prep course at a nearby university, community college, or through an online provider. The prep course will consist of both lecture and practice exams. Schedule the LEED Green Associate exam before the end of the year. 2022: Second year
The third year will be focused on gaining practical experience and obtaining LEED project experience. Work on a LEED project as a project manager or team leader. Participate in a USGBC-sponsored LEED study group or LEED v4 webinar series to stay up to date on the latest trends and developments in green building. Schedule the LEED Green Associate exam before the end of the year. Create a horizontal bar chart format to outline the steps taken in each year.
The chart provides a clear and concise overview of what steps need to be taken in order to achieve LEED credentials within three years.
To know more about community college visit:-
https://brainly.com/question/30637393
#SPJ11
A wooden log is to be used as a foot bridge to span a gap. The log is required to support a concentrated load 0f 30 kN at midspan. Allowable shear stress is 70 MPa. What is the diameter of the log that would be needed?
The given details are: Force acting on the wooden log = 30kNThe allowable shear stress = 70 MPa Formula to be used: Shear stress (τ) = F/(π/4)d² where F is the force acting on the wooden log, d is the diameter of the wooden log.
Let us calculate the diameter of the wooden log: Diameter of the wooden log = √(4F/(πτ))Substituting the values in the above formula: Diameter of the wooden log = √(4 × 30000 N/(3.14 × 70 × 10⁶ N/m²)).
Diameter of the wooden log = √(120000/21980000)Diameter of the wooden log = √0.00547Diameter of the wooden log = 0.074m or 74mmTherefore, the diameter of the log that would be needed is 74mm.
To know more about acting visit:
https://brainly.com/question/1410250
#SPJ11
Transportation Engineering A traffic is moving at 60 kph speed & density of 15 vpk along a one lane road. A truck enters Q2 (25 pts) that road moving at a speed of 16.55 kph in front of that traffic. The traffic slows down behind the truck to its speed moving at a high density of 120 vpk. The truck stays on this road for 5 min. then turns off. The traffic accelerates to maximum conditions after the truck leaves the road. Find the platoon length accumulated behind the slow truck when it leaves the road and how long does it take for that platoon to dissipate?
Transportation Engineering deals with the movement of people, goods, and materials across the world. It incorporates the practical aspects of transportation planning and design, infrastructure management, and operations, including highways, railways, airports, urban transit, and seaports.
Moreover, transportation engineering is a branch of civil engineering that focuses on designing and maintaining transportation systems to provide safe, reliable, efficient, and sustainable transportation. The following is the solution for the question: A truck enters Q2 moving at a speed of 16.55 kph in front of that traffic. The traffic slows down behind the truck to its speed moving at a high density of 120 vp k. The truck stays on this road for 5 min.
Now, the platoon would take a total time to pass the road which is equal to the time it would take to cover the length of the platoon while moving at the maximum speed (60 km/hr) minus the time it would take to cover the length of the platoon while moving at 16.55 km/hr. Time taken at a maximum speed = Length/Speed = 0.0331/60 km/hr = 0.00055167 hours Time taken at 16.55 km/hr = Length/Speed = 0.0331/16.55 km/hr = 0.0019977 hours Total time taken to pass the platoon = 0.00055167 - 0.0019977 = -0.00144603 hours The total time taken for the platoon to dissipate = 6 to 8 minutes which is equal to 0.1 to 0.133 hours. Therefore, the platoon length accumulated behind the slow truck when it leaves the road is 0.0331 km and the time taken for that platoon to dissipate is between 0.1 to 0.133 hours.
To know more about management visit:
brainly.com/question/32216947
#SPJ11
rue or false. The Domain Naming System (DNS) is basically the phone book of the Internet as it stores all the IP addresses (phone numbers) and domain names (people, places, and businesses). O True False QUESTION 4 Virtual law concerns digital lawyers arguing real world cases before virtual judges in a simulated world. True False
The statement "The Domain Naming System (DNS) is basically the phone book of the Internet as it stores all the IP addresses (phone numbers) and domain names (people, places, and businesses)" is true.
On the other hand, the statement "Virtual law concerns digital lawyers arguing real-world cases before virtual judges in a simulated world" is false.
The Domain Naming System (DNS) serves as the phone book of the Internet. It is responsible for translating domain names, such as www.example.com, into IP addresses, which are unique identifiers for devices connected to the internet. DNS stores the mapping between domain names and IP addresses, allowing users to access websites by typing domain names instead of remembering complex IP addresses. Thus, the statement about DNS is true.
On the other hand, the statement about virtual law is false. Virtual law typically refers to legal issues arising from virtual environments, such as virtual reality or online platforms. It involves legal considerations related to digital transactions, online privacy, intellectual property, and cybercrime. However, the concept of digital lawyers arguing real-world cases before virtual judges in a simulated world is not a commonly practiced scenario in the legal field. While technology can play a role in facilitating legal processes, the traditional legal system primarily operates in the physical world with real judges presiding over cases.
Learn more about Domain Naming System here:
https://brainly.com/question/32768737
#SPJ11
Choose the correct statement.
a. Alpha method is used for short-term analysis while beta method is used for long-term analysis.
b. Both alpha method and beta method can be used for long-term analysis.
c. Gamma method is used for short-term analysis while alpha or beta method is used for long-term analysis.
d. Alpha method is used for long-term analysis while beta method is used for short-term analysis.
e. Gamma method is used for long-term analysis while alpha or beta method is used for short-term analysis.
f. Both alpha method and beta method can be used for short-term analysis. End-bearing piles are to be constructed ina site with soil stratigraphy as follows (starting from the ground surface):
3 m layer of new fill, followed by 9 m layer of soft clay, followed by a deep layer of dense sand. The GWT is 2m below the ground surface. When we calculate the ultimate capacity of the pile, we should
a. Use the frictional capacity from all the layers in downword direction.
b. Use the frictional capacity from all the layers in upward direction.
c. Use the frictional capacity from the fill layer and the soft clay layer in downward direction but that from the dense sand layer in upward direction.
d. Use the frictional capacity from the fill layer in downward direction but that from the soft clay layer and dense sand layer in upward direction.
e. Use the frictional capacity from the the soft clay layer in downward direction but that from the fill layer and dense sand layer in upward direction.
The correct statement is that Alpha method is used for short-term analysis while beta method is used for long-term analysis. There are different soil tests used in the calculation of soil bearing capacity. Alpha and Beta are two of these methods. These two methods are used for soil bearing capacity calculation for both short-term and long-term analysis, respectively.
So, option (a) Alpha method is used for short-term analysis while beta method is used for long-term analysis is incorrect. Gamma method is used for the dynamic analysis of soil while alpha and beta methods are used for static analysis. Hence, option (c) Gamma method is used for short-term analysis while alpha or beta method is used for long-term analysis is incorrect.
Alpha method: In this method, the unit weight and angle of internal friction of the soil are calculated to determine the soil’s bearing capacity. This method is mainly used for calculating the short-term bearing capacity of the soil. In addition, the soil is assumed to be isotropic.
Beta method: In this method, the soil’s angle of internal friction and cohesion are calculated to determine the soil’s bearing capacity. It is used to calculate the soil’s long-term bearing capacity, and the soil is considered to be anisotropic. Gamma method: This method is used for the dynamic analysis of soil.
To know more about bearing visit:
https://brainly.com/question/30446290
#SPJ11
1. a) For the initial value theorem (IVT) and the final value theorem (FVT) properties for Laplace transforms i) Explain both properties in your own words and comment on why they are advantageous for engineers. ii) Explaining all steps, show the proof for the final value theorem. b) Determine the following for the first order differential equation and initial condition shown using the Laplace transform properties. 3+ 2y = 5, where y(0) = 2 dy dt i) The following transfer function, Y(s), using the derivative property 6s + 5 Y(S) = s(3s +2) The value of the time domain function as the time approaches zero, lim y(t) using the initial value theorem property.
ii) The value of the time domšin function as the time approaches infinity, lim y(t) using the final value theorem property.
Initial value theorem (IVT):According to the initial value theorem, the value of the time-domain function at time 0 is equal to the limit of the Laplace transform of the function as s approaches infinity.
Final value theorem (FVT):According to the final value theorem, the value of the time-domain function at time infinity is equal to the limit of the Laplace transform of the function as s approaches zero. These properties are advantageous for engineers as they provide a convenient way to determine the behavior of a system at initial and final states, respectively.
This information can be used to design and optimize the system accordingly.ii) Proof for Final Value Theorem:Given a Laplace transform of a function f(t), F(s), the final value theorem states that if the function is stable and all poles of F(s) are on the left side of the s-plane, then the limit of the function as t approaches infinity is equal to the limit. the Laplace transform as s approaches zero.
To know more about Initial visit:
https://brainly.com/question/32209767
#SPJ11
A steam turbine, operating reversibly and adiabatically, takes in superheated steam at 2000kPa and discharges at 50kPa. (a) What is the minimum superheat required so that the exhaust contains no moisture? (b) What is the power output of the turbine if it operates under these conditions and the steam rate is 5 kg⋅s −1 ?
A) The turbine cannot prevent moisture in the exhaust through superheating.
B) The power output of the turbine is 4802.9 kW.
A) Calculation of minimum superheat required to avoid moisture in exhaust:
For the condition of no moisture in the exhaust, the quality of the steam at state 2 (x2) is 0. To determine the superheat required to prevent moisture, the process from state 1 to 2 is divided into two parts.
1. Isentropic expansion (2a) to the saturation state (2s):
During the isentropic expansion (2a), the entropy remains constant, s2a = s1. The discharge pressure is 50 kPa, and the enthalpy at this pressure is given by the steam tables as hf = 2776.3 kJ/kg and hg = 2835.8 kJ/kg. The quality at state 2a (x2a) can be calculated using the formula: X2a = (h2a - hf) / (hg - hf).
2. From state 2a to 2s:
At state 2s, the steam is dry saturated, x2s = 1. This means hf = hfg, where hfg is the latent heat of vaporization at the saturation temperature T2s. From the steam tables, hf = 2837.1 kJ/kg at T2s = 45.8°C. The heat that must be extracted during this constant-pressure heat-rejection process is given by: Q2a-2s = h2a - hf = h2a - hfg.
Since the turbine operates adiabatically, there is no heat transfer. Therefore, ΔS = S2s - S2a = S1 - S2a. And since the turbine operates reversibly, ΔS = Q / T1. By combining these equations, we get: Q = T1 (S1 - S2a). Also, Q = h1 - h2a. Substituting these equations, we can solve for h2a: h2a = h1 - T1 (S1 - S2a).
The superheat required to avoid moisture at the exhaust is given by: T2s - T2a = T2s - T1 (S1 - S2a) / Cp, where Cp is the specific heat capacity of steam at constant pressure.
B) Calculation of Power Output of Turbine:
Given the steam rate of 5 kg/s, we can calculate the power output of the turbine using the formula: Power Output = Mass Flow Rate x Specific Work done by Turbine. The specific work done by the turbine is the difference in enthalpy between the inlet and exit states, which can be expressed as: Specific work done = h1 - h2. Substituting the given values, we find: Power Output = 5 x (3390.9 - 2435.1) = 4802.9 kW.
Therefore, the power output of the turbine is 4802.9 kW.
Learn more about turbine
https://brainly.com/question/33554061
#SPJ11
Why should bid alternates be estimated
straight?
Why include extensive backup with change
orders?
What is the difference between a change order and a
claim?
Why prepare an as-built estimate?
Bid alternates, extensive backup with change orders, the difference between a change order and a claim, and as-built estimates are essential aspects of construction estimating. The primary reason for estimating bid alternates straight is to provide the contractor with an alternative method of completing a construction project.
The bid alternates in construction estimating are the extra work items that are only needed if certain specific events occur.It can also be used to change the work's extent, quality, or completion time. In construction estimating, preparing extensive backup with change orders is essential to help the project manager confirm that the changes are within the budget and scope. It also helps to reduce misunderstandings and disputes with the project owner.The difference between a claim and a change order is that a change order is a written instruction to alter the contract sum. A claim, on the other hand, is a written document that seeks compensation for losses incurred as a result of the project's owner's or another contractor's actions.
In construction estimating, the importance of knowing the difference between the two lies in the fact that claim preparation is more complicated and involves legal counsel. Preparing an as-built estimate is critical in construction estimating. It is a comprehensive record of all changes that occurred during the project's construction. This estimate includes the actual design, project changes, and issues that emerged during construction. The as-built estimate helps the project manager during future maintenance and repairs of the structure. Additionally, it can be used to show compliance with building codes, safety, and zoning regulations.In conclusion, bid alternates should be estimated straight to provide the contractor with an alternative way of completing a construction project. Preparing extensive backup with change orders is important to help the project manager confirm that the changes are within the budget and scope.
To know more about construction project visit:
brainly.com/question/30698930
#SPJ11
A certain confined aquifer in the Inanda area in South Africa has a thickness of 18.5 m, a hydraulic conductivity of 12.5 m/day and a storativity of 0.0045. A pumping well drawing from this aquifer has a pumping rate of 0.035 L/s.
1.1 Calculate the transmissivity of the aquifer.
1.2 What is the drawdown at a distance of 15 m from the well after 24 hours of pumping?
1.3 What will be the drawdown after 12 months of pumping?
1.4 What are the basic assumptions that govern groundwater flow? All geologic formations are horizontal and of infinite horizontal extent.
1.1 Transmissivity is given by the product of the hydraulic conductivity (K) and aquifer thickness (b), or T = Kb. So, the transmissivity of the aquifer is T = 12.5 m/day x 18.5 m = 231.25 m2/day. 1.2 Drawdown (s) is given by s = Q / (4 π T) * ln(r / rw) where Q is the pumping rate.
T is transmissivity, r is the radial distance from the well and rw is the well radius. Since well radius is not given, we can assume it to be 0.1 m, and the distance r is 15 m. Thus,
1.3 The drawdown after 12 months of pumping can be estimated using the Theis equation which is given by s = Q / (4 π T) * W(u) where W(u) is the well function that describes the rate of water flow from the aquifer to the well at any time during pumping.
Therefore, s = 0.035 / (4 π x 231.25) * 0.42 = 0.002 m or 2 mm.
So, the drawdown after 12 months of pumping is 2 mm.
1.4The basic assumptions that govern groundwater flow are:
(i) The geologic formations are horizontal and of infinite horizontal extent.
(ii) The aquifer is homogeneous and isotropic.
(iii) The aquifer is confined or unconfined.
(iv) Darcy's law is applicable for calculating groundwater flow.
(v) The rate of water flow from the aquifer to the well is proportional to the hydraulic gradient and is described by the Theis equation.
(vi) The water level in the well is the same as the water level in the surrounding aquifer.
To know more about pumping visit:
https://brainly.com/question/31064126
#SPJ11
A sample of dry sand is tested in direct shear. The shear box holding the sample has a circular cross section with a diameter of 2 inches. The normal (compressive) load imposed is 45 lb. The shear force at failure is 30 lb.
a) Determine the test normal stress and shear stress at failure.
b) Determine the angle of internal friction for this soil
Given that a sample of dry sand is tested in direct shear. The shear box holding the sample has a circular cross section with a diameter of 2 inches. The normal (compressive) load imposed is 45 lb. The shear force at failure is 30 lb.
Normal stress is given by:σ = F/AWhere σ is normal stress, F is the normal load and A is the area of the shear box holding the sample.So,[tex]σ = 45 lb / (π x (2 in. / 2)²)= 45 / (π)= 14.323 psi[/tex]
The shear stress is given by:[tex]τ = F/A[/tex]Where τ is shear stress, F is the shear force and A is the area of the shear box holding the sample.
So,
[tex]τ = 30 lb / (π x (2 in. / 2)²)= 30 / (π)= 9.55 psi[/tex] Angle of Internal Friction
Angle of internal friction (φ) can be calculated as:
[tex]φ = tan⁻¹(τ/σ)[/tex]Where τ is shear stress and σ is normal stress.
So,
[tex]φ = tan⁻¹(9.55/14.323)= tan⁻¹(0.666)= 33.982°[/tex]
The angle of internal friction for this soil is approximately 34°.
To know more about Normal stress visit:-
https://brainly.com/question/31938748
#SPJ11
A 572 Grade 65 steel with F, 448 MPa is used as a simple beam with a span = of 6 meters.
Properties of W 12 x 14
Weight of beam = 204.76 N/m
Area = 2658 mm²
Depth (d) = 302.514 mm
Flange width (b) = 100.787 mm
Flange thickness (t) = 5.690 mm
Web thickness (tw) = 5.029 mm
Section modulus (Sx) = 242529 mm³
> Compute the allowable bending stress of the beam if the compression flange of the beam is fully supported against lateral movement.
3 Compute the allowable bending stress if the compression flange has lateral support only at its ends and at the mid-span.
The allowable bending stress of the beam when the compression flange of the beam is fully supported against lateral movement is 105.32 N/mm² and the allowable bending stress if the compression flange has lateral support only at its ends and at the mid-span is 129.20 N/mm².
[tex]σ= [(Fy × Mp) / (S × b)] × (1 / β)[/tex]
Therefore, Mp = 153.57 N-m
[tex]σ = [(448 MPa × 153.57 N-m) / (242529 mm³ × 100.787 mm)] × (1 / β)[/tex]
[tex]σ = (1.0 × 105.32 N/mm²) × (1 / β)[/tex]
The value of β can be taken from the AISC specifications manual Table 3-10.β = 1.0 .
σ = 105.32 N/mm²
The allowable bending stress if the compression flange has lateral support only at its ends and at mid-span is given by;
[tex]σ= [(Fy × Mp) / (S × b)] × [(4Cw) / (4Cw + βL²)][/tex]
[tex]Cw = [(h × t² × ((d/2) + t)) / 3] + [(b × tw³) / 12] + [(h - (2 × t)) × (tw / 2)²][/tex]Where h = Depth of the section = 302.514 mmt = Thickness of the flange = 5.690 mm
[tex]Cw = [(302.514 × 5.690² × ((302.514/2) + 5.690)) / 3] + [(100.787 × 5.029³) / 12] + [(302.514 - (2 × 5.690)) × (5.029 / 2)²][/tex]
Cw = 155775.37 mm⁶
σ = [[tex](448 MPa × 230.66 N-m)[/tex] / ([tex]242529 mm³ × 100.787 mm)][/tex]×[tex][(4 × 155775.37 mm⁶)[/tex] / [tex](4 × 155775.37 mm⁶ + 1.0 × 6²)][/tex]
[tex]σ = (1.71 × 105.32 N/mm²) × (0.778 / 1.028)[/tex]
Therefore,σ = 129.20 N/mm².
To know more about compression visit:-
https://brainly.com/question/22170796
#SPJ11
A catchment area having D index value of (15) mm/hr experienced the storm of the following intension: 1) 50 mm/hr for 2 hrs 2) 30 mm/hr for 1/2 hr The resulting surface runoff was (10x106) m³. Find the catchment area.
The D index value is a method of estimating the time of concentration in an area and has units of mm/hr. In this case, a catchment area has a D index value of 15 mm/ hr and has experienced a storm of two different intensities:
50 mm/hr for 2 hours and 30 mm/hr for 0.5 hours. The resulting surface runoff was 10x10^6 m³. The catchment area can be determined using the following steps:
1. Determine the rainfall depth: To calculate the rainfall depth for each of the storm intensities, multiply the intensity by the duration.
2. Determine the total rainfall depth: The total rainfall depth is the sum of the rainfall depths for each storm.
Total rainfall depth = 100 mm + 15 mm = 115 mm
3. Calculate the runoff volume: The runoff volume can be calculated using the following equation:
Runoff volume = Catchment area * Rainfall depth * (1 + 0.007 * Rainfall depth)
where the rainfall depth is in mm and the runoff volume is in m³.
To know more about concentration visit:
https://brainly.com/question/13872928
#SPJ11
during which season you will recommend to carryout
excavation for construction. also give reason
Excavation for construction is best carried out in a dry season, particularly in the summer months, depending on the location. This is because the dry season usually has less rainfall and drier soil, making it easier to excavate and construct without any complications.
The excavation process involves removing dirt, rocks, and other materials from the ground to create a foundation for construction. If the soil is too wet or the ground is soaked with water due to excessive rainfall, it can cause problems such as mudslides or erosion.
The dry season is also beneficial because it allows for better visibility and access to the site. It can be challenging to navigate through a construction site in the rainy season, as the mud and slippery surfaces make it challenging to move equipment and materials around.
The dry season can also help to reduce costs and increase efficiency as excavation can be carried out more quickly and efficiently without any weather-related disruptions. carrying out excavation for construction during the dry season is the best option due to less rainfall, drier soil, better visibility, and accessibility.
To know more about Excavation visit:-
https://brainly.com/question/27447995
#SPJ11
