Read the following scenario and determine if the situation requires a direct or indirect message.

You have just been offered a promotion that your friend and coworker, Juanita, has been hoping for. Juanita knows that you had a scheduled meeting with your boss today and sends you an e-mail asking how your meeting went. You know Juanita will be upset when she hears the news of your promotion; however, she is a good friend, and you need to be honest and tell her in your response e-mail.

Explanation:

In that case, the indirect message would be ideal to be sent in response to Juanita's email.

The indirect approach can be described as one that is carried out in order to reduce the negative impact that a message can cause on the recipient, as in the case of Juanita, who is likely to be upset with the context of the message, so it would be ideal in this situation.

Writing an indirect message means using argumentative elements before arriving at the main idea that may be the source of conflicts. This approach helps to resist messages, as it gives the sender the opportunity to discuss the facts in a thoughtful and explanatory way, to minimize the effects caused by the misinterpretation of the message.

Step 2.
List 5 types of white-collar crimes that could be committed by employees anytime during the process that gets products in front of customers. Additionally, advise your client on how to prevent each crime.​

Assuming that data mining techniques are to be used in the following cases, identify whether the task required is supervised or unsupervised learning.

a. Deciding whether to issue a loan to an applicant based on demographic and financial data (with reference to a database of similar data on prior customers).
b. In an online bookstore, making recommendations to customers concerning additional items to buy based on the buying patterns in prior transactions.
c. Identifying a network data packet as dangerous (virus, hacker attack) based on comparison to other packets whose threat status is known.
d .Identifying segments of similar customer

When room temperature is kept at 66°F, a 3000 ft2 House without insulation in Morgantown loses in average 4000 BTU/min thermal energy to ambient air during winter time (from November 1st to March 31). The cost of a low efficiency (90) furnace fueled by natural gas is $2000. The cost of a high efficiency (99.5%) furnace fueled by natural gas is $3000. Both furnaces have a life expectation of 20 years. The installation of an insulation layer is estimated to reduce the heat loss by 80% at a cost of $30,000. You can assume the house and insulation layer can be used for 80 years.

(1) Please find the best design for this house for the estimated natural gas price of $3.0/MBTU (current price) and $12.0/MBTU (natural gas price a few years ago), respectively.

(2) Please comments if the application of the heat transfer knowledge helps to reduce the emissions of greenhouse gases.

(3) Check if the methane in natural gas should be considered as greenhouse gas, comments its greenhouse gas potential, and explain the benefit of high efficiency furnace in heating a house.

Currently, our system is characterized by a lack of fit between what the customer wants and what the SCM system is best able to provide. As a result, which of the following would apply? The only way to restore fit is for the firm to change the market segment it is going after. Unless something is done, our firm will not be the most effective and efficient long-term supplier. Any firm can successfully counter such inconsistencies through the use of patents and aggressive advertising.

Windsor, started the year with $51600 in its Common Stock account and a credit balance in Retained Earnings of $37800. During the year, the company earned net income of \$41300 and declared and paid $17200 of dividends. In addition, the company sold additional common stock amounting to \$24100 . As a result, the amount of its retained earnings at the end of the year would be

You have decided that it is time to sell your company and spend time on the beaches of Hawaii. A potential buyer is interested in your company, but he does not have the necessary capital to pay you a lump sum. Instead, he has offered $800,000 today and annuity payments for the balance. The first payment will be for $250,000 in three months. The payments will increase at 1.9 percent per quarter and a total of 25 quarterly payments will be made.

Required:
If you require an EAR of 12 percent, how much are you being offered for your company?

1.A bank branch must keep stock of cash on hand for customer withdrawals. The net daily withdrawal rate at the branch is $10,000. The borrowing rate for the cash was 8% per year. Replenishment of the cash stock form the central bank requires careful accounting and contracting to an armored delivery service. This costs $400 per replenishment and requires two days of notice to the carrier. Determine the optimal policy for obtaining cash from the central bank. Find the order quantity and the reorder level.

Wellington Recycling recycles newsprint, cardboard, and so forth, into received packaging materials. For the coming year, Wellington estimates total manufacturing overhead to be $359,640. The managers are not sure if direct labor hours (estimated to be 9,990) or machine hours (estimated to be 7,982 hours) is the best allocation base to use for allocating manufacturing overhead. Wellington bids for jobs a 31 % markup over total manufacturing cost.

After the new fiscal year began, Hollings Paper Supply asked Wellington Recycling to bid for a job that will take 1 ,975 machine hours and t ,700 direct labor hours to produce. The direct labor cost this will be $10 per hour, and the direct materials will total S25,500.

Required:
Compute the total job cost and price if Wellington decided to use direct labor hours as the manufacturing overhead allocation base for the year.

8. Golden Enterprises started the year with the following: Assets $50,000; Liabilities $15,000; Common Stock $30,000; Retained Earnings $5,000. During the year, the company earned revenue of $2,500, all of which was received in cash, and incurred expenses of $1,500, all of which were unpaid as of the end of the year. In addition, the company paid dividends of $500 to owners. Assume no other activities occurred during the year. The amount of Golden's assets at the end of the year is: A) $52,500. B) $54,000. C) $52,000. D) $53,500.

Following information is given of ABC Ltd.
Cash Outflow $150,000
Annual Cash inflow
First 4 years $25,000
Next 6 years $10,000
Estimated life 10 years
Required: Calculate Payback period

Women speakers who are nervous tend to wobble on their high heels.

What is buying and selling?​

Goodwill:
is an intangible asset that is tested annually for impairment.
is an intangible asset that is always amortized.
appears as an expense on the income statement when a company buys an entire business unit.
ООО
can appear on the balance sheet either as an asset or a liability.
is the difference between the purchase price of a business and the book value of the net assets.

A team is trying to determine the best process type for producing a new product family. The product consists of a base model with a number of different options that customers may specify. Because of the differences between the number and types of options that can be specified, the time required for different operations can vary quite a bit. One of the operations that must be performed on the base model requires a complex machine tool. Setup times for this tool are long, necessitating large batch sizes. It would not be economical to purchase more machines of this type. Which of the following process types would be best for producing a new product family?
a. cell
b. continuous flow process
c. machine-paced line
d. worker-paced line

Recently, a Domino's pizza franchise in southwest Ohio made th strategic decision to stay open for 24 hours a day. The manager, Steve Martin, made this decision about a month ago in response to increased demand in Domino's pizza. Other Domino's franchise owners are now
considering adopting a similar strategy. In this activity, you will categorize a set of statements regarding activities in the internal and external environments as they relate to Domino's pizza, and a potential initiative of staying open 24 hours a day. These statements will identify either a
Strength, Weakness, Opportunity, or Threat.


Developing a marketing plan consists of five steps. The second step in the process, after developing a mission, is to conduct a situation analysis, using a SWOT analysis. This tool allows firms to assess both the internal environment in regards to its Strengths and Weaknesses
and the external environment in regards to its Opportunities and Threats.

Match is the following.

a. Staffing
b. Health
c. Strong Brand Name
d. Demand
e. Inventory Management
f. Competitors
g. Excellent Location
h. Late Night Eating

1. Streaght
2. Weakness
3. Opportunity
4. Threat

During April, the first production department of a process manufacturing system completed its work on 300,000 units of a product and transferred them to the next department. Of these transferred units, 60,000 were in process in the production department at the beginning of April and 240,000 were started and completed in April. April's beginning inventory units were 60% complete with respect to materials and 40% complete with respect to conversion. At the end of April, 82,000 additional units were in process in the production department and were 80% complete with respect to materials and 30% complete with respect to conversion.
The production department had $850,368 of direct materials and $649,296 of conversion costs charged to it during April. Also, its beginning inventory of $167,066 consists of $118,472 of direct materials cost and $48,594 of conversion costs. Using the FIFO method, prepare the direct materials cost and the conversion cost per equivalent unit and assign April's costs to the department's output. (Round "Cost per EUP" to 2 decimal places.) Equivalent Units of Production (EUP)- FIFO Method Units EUP- % EUP- Materials Materials Conversion Conversion 0 Materials Conversion Equivalent units of production Cost per Equivalent Unit of Production Cost of beginning goods in process Total costs - Equivalent units of production Cost per equivalent unit of production (rounded to 2 decimals) Total Costs to Account for: Costs EUP Costs EUP 0 0 $ 0.00 $ 0.00 Total costs to account for: Total costs accounted for * Difference due to rounding cost/unit Assignment of Costs to Output of Department Cost of 60,000 units from beginning inventory Beginning inventory EUP Cost per EUP Total cost Materials to complete Conversion to complete Total costs to complete Total cost of 60,000 units in beginning inventory $ 0.00 EUP Cost of units started and completed this period Direct materials Conversion costs Total cost of 240,000 units started and completed Total cost of 300,000 units transferred out Cost per EUP Total cost $ 0.00 $ 0.00 $ 0.00 0.00 FUP Costs of units in ending inventory Direct materials Conversion costs Total cost of 82,000 units in ending inventory Total costs assigned Cost per Total cost EUP Total cost $ 0.00 $ 0.00 $ 0.00 0.00

The following events apply to Lewis and Harper, a public accounting firm, for the Year 1 accounting period: Performed $64,500 of services for clients on account. Performed $41,000 of services for cash. Incurred $30,000 of other operating expenses on account. Paid $15,500 cash to an employee for salary. Collected $50,000 cash from accounts receivable. Paid $16,000 cash on accounts payable. Paid an $5,000 cash dividend to the stockholders. Accrued salaries were $2,200 at the end of Year 1.
Required
a. Show the effects of the events on the financial statements using a horizontal statements model like the following one. In the Cash Flow column, use OA to designate operating activity, IA for investment activity, FA for financing activity, NC for net change in cash and NA to indicate the element is not affected by the event. The first event is recorded as an example. (Enter any decreases to account balances and cash outflows with a minus sign.)
b. What is the amount of total assets at the end of 2014?
c. What is the balance of accounts receivable at the end of 2014?
d. What is the balance of accounts payable at the end of 2014?
f. What is net income for 2014?
g. What is the amount of net cash flow from operating activities for 2014?

A fitness center’s drink machine has been empty for two weeks.When the delivery person arrives to refill the machine the fitness centers manager complains that the fitness center has lost money what should the delivery person do

Shelly Eckert has prepared the following list of statements about internal control. Identify each statement as true or false. If false, indicate how to correct the statement. a. One of the objectives of internal control is to safeguard assets from employee theft, robbery, and unauthorized use. Select an option b. One of the objectives of internal control is to enhance the accuracy and reliability of the accounting records. Select an option c. No laws require U.S. corporations to maintain an adequate system of internal control. Select an option

Pelder Products company manufactures two types of engineering diagnostic equipment used in The construction. in two products are based on different technologies, and ultrasound, but are the manufacturing cost x-ray ultrasound products by adding together direct materials, direct labor, a overhead cost applied based on the number of direct labor hours. The factory has three overhead departments that support the single production line that makes both products. Budgeted overhead spending for the departments is as follows: Department Engineering Material design handling Setup Tota $5,000 $3,000 $14.000 $6,000 Pelder's budgeted manufacturing activities and costs for the period are as follows:
Product
Activity X-Ray Ultrasound
Units produced and sold 50 100
Direct materials used $5,000 $8,000
Direct labor hours used 100 300
Direct labor cost 4000 12000
Number of parts used 400 600
Number of engineering changes 2 1
Number of product setups 8 7
The budgeted cost to manufacture one ultrasound machine using the activity-based costing method is:_______.
a. $ 225
b. $ 264
c. $ 293
d. $ 305

Bramble Company uses a job order cost system and applies overhead to production on the basis of direct labor costs. On January 1, 2020, Job 50 was the only job in process. The costs incurred prior to January 1 on this job were as follows: direct materials $24,400, direct labor $14,640, and manufacturing overhead $19,520. As of January 1, Job 49 had been completed at a cost of $109,800 and was part of finished goods inventory. There was a $18,300 balance in the Raw Materials Inventory account.

During the month of January, Bramble Company began production on Jobs 51 and 52, and completed Jobs 50 and 51. Jobs 49 and 50 were also sold on account during the month for $148,840 and $192,760, respectively. The following additional events occurred during the month.

1. Purchased additional raw materials of $109,800 on account.
2. Incurred factory labor costs of $85,400. Of this amount $19,520 related to employer payroll taxes.
3. Incurred manufacturing overhead costs as follows:

Idirect materials $20,740
Indirect labor $24,400
Depreciation expense on equipment $14,640
Other manufacturing overhead costs on account $19,520.

4. Assigned direct materials and direct labor to jobs as follows.

Job No. Direct Materials Direct Labor
50 $12,200 $6,100
51 47,580 30,500
52 36,600 24,400

Required:
Calculate the predetermined overhead rate for 2020, assuming Lott Company estimates total manufacturing overhead costs of $ 882,000, direct labor costs of $735,000, and direct labor hours of 21,000 for the year.

makes handheld calculators in two​ models: basic and professional. estimated of manufacturing overhead and machine hours for the year. The basic model actually consumed machine​ hours, and the professional model consumed machine hours. Requirements 1. Compute the predetermined overhead allocation rate using machine hours​ (MHr) as the allocation base. 2. How much overhead is allocated to the basic​ model? To the professional​ model? Requirement 1. Compute the predetermined overhead allocation rate using machine hours as the allocation base. Select the​ formula, and then enter the amounts to compute the predetermined overhead​ (OH) allocation rate. ​(Enter your answer to the nearest​ cent.) ÷ = Predetermined OH allocation rate ÷ =

The following transactions occurred during the month of June 2021 for the Stridewell Corporation. The company owns and operates a retail shoe store.

a. Issued 110,000 shares of common stock in exchange for $550,000 cash.
b. Purchased office equipment at a cost of $91,250. $36,500 was paid in cash and a note payable was signed for the balance owed.
c. Purchased inventory on account at a cost of $220,000. The company uses the perpetual inventory system.
d. Credit sales for the month totaled $374,000. The cost of the goods sold was $187,000. Paid $4,750 in rent on the store building for the month of June.
e. Paid $2,520 to an insurance company for fire and liability insurance for a one-year period beginning June 1, 2021.
f. Paid $158,950 on account for the merchandise purchased in c.
g. Collected $74,800 from customers on account.
h. Paid shareholders a cash dividend of $5,500.
i. Recorded depreciation expense of $1,825 for the month on the office equipment.
j. Recorded the amount of prepaid insurance that expired for the month.

Required:
Prepare journal entries to record each of the transactions and events listed above.

As a professional in any field, it is important to have a comprehensive understanding of what a marketing plan is and why it is there. A marketing plan is an action-oriented document or playbook that guides the analysis, implementation, and control of all marketing activities. Throughout this book, you will develop a professional marketing plan. The twist is that your marketing plan will focus on how to market yourself to achieve your career goals.

Many businesses fail to execute on their marketing plans because they did not spend adequate time clearly identifying what they wanted or expected to do. As a first step in developing your personal marketing plan, you will need to identify the specific objectives that you want to achieve. In developing these objectives, you should ask yourself several questions, such as:

Do I want to attend graduate school? If so, where and what program?
Where do I want to work?
Where do I want to live?
What kind of life do I want to have?
How much will I need to earn to have that life?
Such questions will help you focus on what specific things you need to do to achieve your goals. The more clearly you define your objectives, the more likely you are to realize them.

Your Task: Clearly state three to five specific objectives for your future, and include a brief one- to two-sentence description of each objective.

1. When Heidi Ganahl talks with franchisees about performance expectations and measurements, what part of the management process is she describing? Why is this so important in a franchising business?

Given the demand and cost function shown below, calculate the profit maximizing quantity
Q(P) =2314-89P
c(Q)=12Q

Sagon Corporation has provided data concerning the Corporation's Manufacturing Overhead account for the month of September. Prior to the closing of the overapplied or underapplied balance to Cost of Goods Sold, the total of the debits to the Manufacturing Overhead account was $75,000 and the total of the credits to the account was $56,000. Which of the following statements is true?
a. Manufacturing overhead transferred from Finished Goods to Cost of Goods Sold during the month was $75,000.
b. Actual manufacturing overhead incurred during the month was $56,000.
c. Manufacturing overhead applied to Work in Process for the month was $75,000.
d. Manufacturing overhead for the month was underapplied by $19,000.

A company issued a 20-year, $1,000 par value bond that pays semiannual interest of $40. If the semiannual market rate of interest is 5%, at what amount did the bond sell? (FV of $1, PV of $1, FVA of $1, PVA of $1, FVAD of $1 and PVAD of $1) (Use appropriate factor(s) from the tables provided.) (Do not round intermediate calculations. Round your final answer to nearest whole dollar amount.)
Multiple choices: $828, $1,686, $1,000, $893

As the number of multinational corporations continues to grow, we are experiencing a greater number of international ethical dilemmas. One very real concern has been the human rights abuses in sweatshops in exchange for cheap labor. Several retailers have now banded together to set ethical standards in foreign factories. Which of the following statements summarizes the challenges of companies doing business in developing countries and the concerns of their customers??A) Multinationals must subjectively determine the local living wage, which is usually more than the local legal wage in developing countries. Customers surveyed say they are willing to pay a few dollars more to improve working conditions in sweatshops.
B) Economically sensitive customers want companies to pass along cost savings to them, at all costs, even if the products are made through offshore outsourcing. Companies want to please customers, first!
C) Most multinational corporations have made no attempt to improve working standards at sweatshop factories. They will turn a blind eye to the problem unless U.S. law is passed to force the issue. Customers understand that legal limits come before ethical standards.
D) Multinationals cannot be expected to demand socially responsible behavior from their supplier, including foreign sweatshops. When doing business abroad, the U.S. company need not comply with U.S. law when its supplier(s) is not in the U.S. or on U.S. territory.

Which form of business is the easiest to start?
a. sole proprietorship
b. partnership
c. corporation
d. S-corporation
​