(S)-Pentan-2-ol was treated sequentially with methanesulfonyl chloride (CH3SO2Cl) and then potassium iodide. What is the final product that forms

Answer:

MoClBr₂

Explanation:

First we calculate the mass of bromine in the compound:

Then we calculate the number of moles of each element, using their respective molar masses:

Now we divide those numbers of moles by the lowest number among them:

Meaning the empirical formula is MoClBr₂.

Answer:

Explanation:

The density of pure water is 1 gram per 1 milliliter or one cubic cm. By knowing the density of water we can use it in dilution equations or to calculate the specific gravity of other solutions.

It can also help us determine what other substances are made of using the water displacement experiment. This is done by observing how much water is displaced when an object is submerged in the water. As long as you know the density of the water, the mass of the object being submerged and the volume of increase you can calculate the density of the object.

This was done by the great Archimedes in discovering what composed the kings crown.

Answer:

The mass of bromine liquid that participates in  a chemical reaction=12.8 g

Explanation:

We are given that

Total number of moles of bromine liquid participate in chemical reaction=0.0800 moles

We have to find the mass of bromine liquid that participates.

Atomic mass of Br=79.9 g

1  mole of bromine liquid=2 atomic mass of bromine (Br)

1 mole of bromine liquid ([tex]Br_2[/tex]) =[tex]2\times 79.9=159.8 g[/tex]

0.0800 moles of  bromine liquid=[tex]159.8\times 0.0800[/tex] g

0.0800 moles of  bromine liquid=12.784 g

0.0800 moles of  bromine liquid[tex]\approx 12.8[/tex] g

Hence, the mass of bromine liquid that participates in  a chemical reaction=12.8 g

Answer:

0.53atm = P2

Explanation:

Gas at 1.00atm and 20°C. Temperature increased to 40°C...

We can solve this question using combined gas law:

P1*V1 / T1 = P2*V2 / T2

Where P is pressure, V volume and T absolute temperature of 1, initial state and 2, final state.

Compunting the values of the problem:

P1 = 1.00atm

V1 = 250mL

T1 = 20°C + 273.15 = 293.15K

P2 = ?

V2 = 500mL

T2 = 40°C + 273.15 = 313.15K

1.00atm*250mL / 293.15K = P2*500mL / 313.15K

Answer:

25.08 grams of O₂ are needed to react with 8.15 g of C₂H₂.

Explanation:

The balanced reaction is:

2 C₂H₂ + 5 O₂ → 4 CO₂ + 2 H₂O

By reaction stoichiometry, the following amounts of moles of each compound participate in the reaction:

The molar mass of each compound is:

Then, by reaction stoichiometry, the following mass quantities of each compound participate in the reaction:

Then you can apply the following rule of three: if by stoichiometry 52 grams of C₂H₂ react with 160 grams of O₂, 8.15 grams of C₂H₂ react with how much mass of O₂?

[tex]mass of O_{2} =\frac{8.15 grams of C_{2} H_{2}*160 grams of O_{2} }{52 grams of C_{2} H_{2}}[/tex]

mass of O₂= 25.08 grams

25.08 grams of O₂ are needed to react with 8.15 g of C₂H₂.

Answer:

I expect to observe a change in colour from reddish brown to a colourless solution

Explanation:

Bromine (Br2) attacks the electron rich carbon-carbon triple bond in but-2-yne, an alkyne to form an initial product 2, 3 dibromobut-2-ene; which reacts with excess bromine to form a final product 2,2,3,3 -tetrabromobutane.

The reaction occurs in two steps. On approaching but-2-yne, bromine molecule becomes polarised forming an induced dipole containing a bromonium ion.

Br - Br → Br+ - Br-

The bromonium ion (Br+) formed then attacks the carbon - carbon triple bond to form the initial product

2,3- dibromobut-2-ene

CH2-C≡C-CH2 + Br+ →

CH2 - CBr =CBr-CH2

(2,3- dibromobut-2-ene)

Which in the presence of excess bromine gives the final product

2,2,3,3 - tetrabromobutane.

CH2 - CBr =CBr-CH2 + Br2 →

CH3 -CBr2-CBr2 - CH3

2,2,3,3 - tetrabromobutane.

A visible change in colour from the reddish-brown colour of Bromine to a colourless solution is observed during the reaction.

Answer:

iron

Explanation:

Answer:

) Making a sandwich To prepare a liquid sample to IR analysis, firstly place a drop of the liquid on the face of a highly polished salt plate (such as NaCl, AgCl or KBr), then place a second plate on top of the first plate so as to spread the liquid in a thin layer between the plates, and clamps the plates together.

Answer:

The rate of change of T with respect to time is 0.40 K/min

Explanation:

The gas law equation is:

[tex] PV = nRT [/tex]

We can find the rate of change of T with respect to time by solving the above equation for T and derivating with respect to time:

[tex] \frac{dT}{dt} = \frac{d}{dt}(\frac{PV}{nR}) [/tex]

[tex] \frac{dT}{dt} = \frac{1}{nR}(V\frac{dP}{dt} + P\frac{dV}{dt}) [/tex]

Where:

n: is the number of moles = 10 mol

R: is the gas constant = 0.0821

V: is the volume = 13 L

P: is the pressure = 8.0 atm

dP/dt: is the variation of the pressure with respect to time = 0.13 atm/min

dV/dt: is the variation of the volume with respect to time = -0.17 L/min

Hence, the rate of change of T is:

[tex] \frac{dT}{dt} = \frac{1}{10*0.0821}(13*0.13 - 8.0*0.17) = 0.40 K/min [/tex]    

Therefore, the rate of change of T with respect to time is 0.40 K/min

I hope it helps you!    

Answer:

E = hv

Explanation:

Energy = planck constant × frequency

Answer:

The statement is false

Explanation:

Number of moles of alkene = 2.31 × 85/1000 = 0.196 moles

Number of moles of Br2 = 3.55 × 7.5/1000 = 0.0266 moles

Given that the reaction is 1:1

1 mole of alkene reacts with 1 mole of bromine

0.196 moles of alkene should react with 0.196 moles of bromine

Hence, to achieve 100%yield, 0.196 moles of bromine and not 25mmols of elemental bromine

Answer:

Option A is correct, there will be no N2 left in the flask

Explanation:

Step 1 : Data given

Number of moles of N2 = 135 mmol = 0.135 mol

Number of moles of H2 = 405 mmol = 0.405 mol

Step 2: The reaction

N2(g)+3H2(g)→2NH3(g)

Step 3:

For 1 mol N2 we need 3 moles H2 to produce 2 moles NH3

Both will completely react. There is no limiting reactant.

There will be produce 0.270 moles NH3.

Option A is correct, there will be no N2 left in the flask

Answer:

See explanation and image attached

Explanation:

The reaction is an E2 reaction. It is a synchronous reaction.

The base KOC(CH3)3 abstracts a proton as the bromide ion leaves in a single step.

This yields the product as shown in the image attached.

Answer:

The number of moles of H₃PO₄ that reacted is 0.000343 moles

Note: Some data is missing. Data from the attachment is used for the calculationsinnthe explanation below.

Explanation:

The reaction is a neutralization reaction between NaOH and H₃PO₄. The equation of the reaction is given as follows:

3 NaOH + H₃PO₄ ---> Na₃PO₄ + 3 H₂O

The molarity of the NaOH solution is 0.238 mol/L.

Average volume of NaOH used during the titration to arrive to endpoint = (4.6 + 3.9 + 4.5) mL / 3 = 4.33 mL

Molarity is defined ratio of the number of moles of solute to the volume of solution. Mathematically, molarity = number of moles/volume in Litres

Number of moles of NaOH reacted = 0.238 mol/L × (4.33mL × 1 L/1000 mL)

Number of moles of NaOH = 0.00103 moles

From the equation of the reaction, 3 moles of NaOH reacts with 1 mole of H₃PO₄

0.00103 moles of NaOH will react with 0.00103 x 1/3 moles of H₃PO₄ = 0.000343 moles of H₃PO₄.

Therefore, number of moles of H₃PO₄ that reacted is 0.000343 moles

Answer:

zero

Explanation:

I I think one should be so accurate with measurements and experiments

Answer:

For a: Lead iodide is a yellow precipitate.

For b: Barium sulfate is a white precipitate.

For c: Ferric hydroxide is a brown precipitate.

For d: Copper (II) hydroxide is a blue precipitate.

Explanation:

Precipitation reaction is defined as the reaction where a solid precipitate (solid substance) is formed at the end of the reaction. It is insoluble in water.

For the given options:

The chemical reaction between KI and lead (II) nitrate follows:

[tex]2KI(aq)+Pb(NO_3)_2(aq)\rightarrow PbI_2(s)+2KNO_3(aq)[/tex]

The iodide of lead is generally insoluble in water. Thus, lead iodide is a yellow precipitate.

The chemical reaction between barium chloride and sulfuric acid follows:

[tex]BaCl_2(aq)+H_2SO_4(aq)\rightarrow BaSO_4(s)+2HCl(aq)[/tex]

The sulfate of barium is insoluble in water. Thus, barium sulfate is a white precipitate.

The chemical reaction between NaOH and ferric chloride follows:

[tex]3NaOH(aq)+FeCl_3(aq)\rightarrow Fe(OH)_3(s)+3NaCl(aq)[/tex]

The hydroxide of iron is insoluble in water. Thus, ferric hydroxide is a brown precipitate.

The chemical reaction between NaOH and copper sulfate follows:

[tex]CuSO_4+2NaOH\rightarrow Cu(OH)_2+Na_2SO_4[/tex]

The hydroxide of copper is insoluble in water. Thus, copper (II) hydroxide is a blue precipitate.

(a) The yellow precipitate formed in the reaction between KI and Pb(NO3)2 would be PbI2 according to the equation:

[tex]Pb(NO_3)_2(aq) + 2KI(aq) ---> PbI2(s) + 2KNO_3(aq)[/tex]

(b) The white precipitate formed in the reaction between BaCl2 and H2SO4 would be  BaSO4 according to the equation:

   [tex]BaCl_2 (aq) + H_2SO_4 (aq) ---> BaSO_4 (s) + 2 HCl (aq)[/tex]

(c) The brown precipitate formed in the reaction between NaOH and FeCl3 would be Fe(OH)3 according to the equation:

[tex]FeCl_3 (aq) + NaOH (aq) ---> Fe(OH)_3 (s) + NaCl (aq)[/tex]

(d) The blue precipitate formed in the reaction between CuSO4 and NaOH would be Cu(OH)2 according to the equation:

[tex]CuSO_4(aq) + 2 NaOH (aq) ---> Cu(OH)_2 (s) + Na_2SO_4 (aq)[/tex]

More on precipitation reaction can be found here: https://brainly.com/question/24846690

Answer:

mineral oil; close to; slowly turn

Explanation:

Temperature can be defined as a measure of the degree of coldness or hotness of a physical object. It is measured with a thermometer and its units are Celsius (°C), Kelvin (K) and Fahrenheit (°F).

Generally, temperature measures the average kinetic energy of particles in a particular substance.

A thermometer can be defined as a device used for measuring the temperature (degree of hotness or coldness) of a body or substance is. It is a thin glass having a bulb on one of its end and typically contains either colored alcohol or mercury.

A thermometer adapter is used with a temperature probe in the distillation process, in order to determine readings.

To insert a thermometer into an adapter, use mineral oil to prepare or make suitable the thermometer. Then, hold the thermometer close to the adapter and slowly turn the thermometer into the adapter.

Answer:

When this equation is solved, the two values of the unknown are 0.0643 and -0.082

Explanation:

Given

[tex]1.77 * 10^{-2} = \frac{x^2}{0.298 - x}[/tex] --- the actual equation

Required

The values of x

We have:

[tex]1.77 * 10^{-2} = \frac{x^2}{0.298 - x}[/tex]

Cross Multiply

[tex]1.77 * 10^{-2} * (0.298 - x)= x^2[/tex]

Multiply both sides by 100

[tex]1.77 * (0.298 - x)= 100x^2[/tex]

Open bracket

[tex]0.52746 - 1.77x= 100x^2[/tex]

Rewrite as:

[tex]100x^2 + 1.77x - 0.52746 =0[/tex]

Using quadratic formula:

[tex]x = \frac{-b \± \sqrt{b^2 - 4ac}}{2a}[/tex]

Where:

[tex]a = 100; b = 1.77; c = -0.52746[/tex]

So, we have:

[tex]x = \frac{-1.77 \± \sqrt{1.77^2 - 4*100*- 0.52746 }}{2*100}[/tex]

[tex]x = \frac{-1.77 \± \sqrt{214.1169}}{2*100}[/tex]

[tex]x = \frac{-1.77 \± 14.63}{200}[/tex]

Split

[tex]x = \frac{-1.77 + 14.63}{200}\ or\ x = \frac{-1.77 - 14.63}{200}[/tex]

[tex]x = \frac{12.86}{200}\ or\ x = \frac{-16.40}{200}[/tex]

[tex]x = 0.0643\ or\ x = -0.082[/tex]

Explanation:

is responsible for interrupting the interaction between pectins and solvent molecules

Answer:

The wavelength of a microwave is LONGER than the wavelength if visible light.

Answer:

Indicate how the concentration of each species in the chemical equation will change to reestablish equilibrium after reactant or product is added.

[tex]2CO(g) + O2(g) <=> 2CO2[/tex]

Explanation:

When the reactants concentration increases, then the equilibrium will shift towards products and when the concentration of products increases, then equilibrium will shift towards reactants.

So, increases in concentration of carbon monoxide (CO) shifts the equilibrium to favor the formation of carbondioxide.

Similarly increase in concentration of oxygen also favor the formation of product carbon dioxide.

Increase in concentration of CO2 favors the formation of CO and O2.

Decrease in product concentration also favors the formation of product.

Decrease in reactant concentration favors the formation of reactants only.

Answer:

55.44L of the 0.17M NaOH are required

Explanation:

Phosphoric acid, H3PO4, reacts with NaOH as follows:

H3PO4 + 3NaOH → Na3PO4 + 3H2O

Where 1 mole of H3PO4 reacts with 3 moles of NaOH

To solve this question we need to find the moles of H3PO4 in the aliquot. Using the balanced equation we can find the moles of NaOH and its volume with the concentration (0.17M) as follows:

Moles H3PO4:

15.4mL = 0.0154L * (0.204mol/L) = 0.00314 moles H3PO4

Moles NaOH:

0.00314 moles H3PO4 * (3mol NaOH / 1mol H3PO4) = 0.009425moles NaOH

Volume NaOH:

0.009425moles NaOH * (1L/0.17moles NaOH) = 0.05544L 0.17M NaOH =

Answer:

0.111 g

Explanation:

1 g = 1000 mg

Doctor ordered the following concentration of Claforan:

C = 1 g/100 mL x 1000 mg/1 g = 10 mg/mL

If we add 2 g iof Claforan, we obtain:

2 g Claforn ---- 180 mg/mL Claforan

To reach a concentration equal to C (10 mg/mL), we need:

10 mg/mL Claforan x 2 g Claforn/(180 mg/mL Claforan) = 0.111 g Claforn

Therefore, we have to add 0,111 g (111 mg) of Claforn to the bag of 100 ml D5W to obtain the ordered concentration of 10 mg/mL Claforan.  

Answer:

The concentrations of hydronium and hydroxide ions in a solution with pH 2.6 are 2.51*10⁻³ and 3.98*10⁻¹² respectively.

Explanation:

pH is a measure of the acidity or alkalinity of an aqueous solution. The pH indicates the concentration of hydrogen ions present in certain solutions. Mathematically it is defined as the opposite of the base 10 logarithm or the negative logarithm of the activity of hydrogen ions, whose equation is

pH= -log [H⁺]

So, being pH= 2.6 and replacing in the definition of pH:

2.6= -log [H⁺]

[tex][H^{+} ]=10^{-2.6}[/tex]

[H⁺]=2.51*10⁻³

pOH is a measure of the concentration of hydroxide ions (OH⁻). The sum between the pOH and the pH results in 14:

pOH + pH= 14

So, being pH= 2.6:

pOH + 2.6= 14

pOH= 14 - 2.6

pOH= 11.4

The pOH is defined as the negative logarithm of the activity of the hydroxide ions. That is, the concentration of OH⁻ ions:

pOH= - log [OH⁻]

Being pOH= 11.4 and replacing

11.4= -log [OH⁻]

[tex][OH^{-} ]=10^{-11.4}[/tex]

[OH⁻]= 3.98*10⁻¹²

The concentrations of hydronium and hydroxide ions in a solution with pH 2.6 are 2.51*10⁻³ and 3.98*10⁻¹² respectively.

Answer:

1900grams of boiling water

Explanation:

0,c=19

100,c=19×100

1900grams

Answer:

Explanation:

The structural formula of 2-methyl-3-hexene is drawn in the attached image below. After then, the three possible structures were drawn and the mechanism reaction.

From the mechanism shown, methanol deprotonates methoxide proton and neutralizes the positive charge to form methoxide. This is followed by the movement of electrons that takes place from the region of higher electron density to lower electron density.

Answer:

less than 5 centimeters because it is a nonvascular plant

Explanation:

Mosses are a group of plants under the division Bryophyta. They are said to be the most primitive plant life in existence as they lack true roots, stems and leaves. They also lack vascular system, hence, they are regarded as non-vascular plants. They usually grow in very small sizes (about 0.2 - 10cm).

According to this question, Penny bought a club moss plant for her water garden and needs to know how tall the plant will grow so she know how much space it will need. Since it is a miss plant that lacks vascular tissues i.e. nonvascular, it will likely grow less than 5 centimeters in height.

Answer:

d

Explanation:

Answer:

True

Explanation:

A hypothesis can be proven true through experimentation. For example, if you hypothesize that a balloon with helium will float in the air, and then you test this and the balloon floats, you have just proven that your original hypothesis is true.

Answer:

Determining the Slope on a p-t Graph. It was learned earlier in Lesson 3 that the slope of the line on a position versus time graph is equal to the velocity of the object. ... If the object has a velocity of 0 m/s, then the slope of the line will be 0 m/s. The slope of the line on a position versus time graph tells it all.

Explanation:

#carryonlearning