See question in the picture below , will give brainliest for correct answer

20 is the correct answer .

What is Absorbance ?

In physics and chemistry, "absorbance" (also known as "optical density") is a measure of how much light is absorbed by a material as it passes through it.  It is expressed as a logarithmic ratio of the intensity of the incident light (I0) to the intensity of the transmitted light (I), typically using the formula A = -log(I/I0). The absorbance of a material depends on its composition and the wavelength of the incident light. Absorbance is commonly used to quantify the concentration of a substance in a solution, using a spectrophotometer or other optical instrument that can measure the amount of light absorbed by the solution at a specific wavelength. The Beer-Lambert law states that there is a linear relationship between absorbance and concentration, making it a useful tool in analytical chemistry and biochemistry.

E = A/cb

To learn more about the Absorbance , click the given below ;

https://brainly.com/question/14919298

#SPJ1

Chymotrypsin is an enzyme and, as such, it possesses the following characteristics:

A. Is a catalyst: Enzymes are biological catalysts that speed up chemical reactions without being consumed or altered in the process.

C. Speeds up a chemical reaction: Enzymes work by lowering the activation energy required for a reaction to occur. This means that the reaction can occur more quickly and efficiently in the presence of an enzyme.

D. Is found in cells of some living organisms: Enzymes are found in the cells of living organisms, where they play a crucial role in many biological processes, such as digestion, metabolism, and DNA replication.

These characteristics are common to all enzymes, including chymotrypsin, which is a type of protease enzyme that is involved in breaking down proteins in the digestive system.

B. Inhibits the binding of a substrate to an active site: This statement is incorrect. Enzymes actually increase the rate of reaction by facilitating the binding of the substrate to the active site, where the reaction takes place. Inhibitors, on the other hand, can interfere with this binding and slow down the reaction.

The independent variable is the the widths of the wires.

In an experimental setup, the independent variable is the variable that is manipulated or changed by the researcher. It is also referred to as the "predictor variable" or the "explanatory variable."

The idea behind manipulating the independent variable is to observe its effect on another variable, which is called the dependent variable. The dependent variable is the variable that is thought to be affected by the independent variable.

Learn more about independent variable:https://brainly.com/question/29430246

#SPJ1

Answer:

8

Explanation:

because you only have 8 hamburger patties

The length in inches would be 4.921 x [tex]10^{-3[/tex] inches.

We want to convert the with of human hair from 125 μm to inches.

Recall that:

1 μm = [tex]10^{-6[/tex] m

Thus:

125 μm = 125 x [tex]10^{-6[/tex] m

Also:

1 m = 39.37 inches

Thus:

125 x [tex]10^{-6[/tex] m = 39.37 x 125 x [tex]10^{-6[/tex] m

                     = 4921.25 x  [tex]10^{-6[/tex] inches

                     = 4.921 x [tex]10^{-3[/tex] inches

In other words, 125 μm is equivalent to 4.921 x [tex]10^{-3[/tex] inches.

More on dimensional analysis can be found here: https://brainly.com/question/13078117

#SPJ1

The relationship between temperature and gas motion is a direct relationship.

The kinetic energy of gas particles is proportional to the square of their velocity, so as the temperature of a gas increases, the velocity of its particles also increases. This means that the motion of the gases becomes more energetic, causing the particles to collide more frequently and with greater force. These collisions result in an increase in pressure and volume, which are two other characteristics that are related to the temperature and motion of gases.

In summary, the relationship between temperature and the motion of gases can be explained by the kinetic theory of gases, which states that the temperature of a gas is directly proportional to the average kinetic energy of its particles. As the temperature of a gas increases, its particles move faster, resulting in more energetic collisions and changes in pressure and volume.

Learn more about temperature:https://brainly.com/question/11464844

#SPJ1

the empirical formula of a compound containing 47. 37 grams of carbon, 10. 59 grams of hydrogen, and 42. 04 grams of oxygen is C3H8O2.

To determine the empirical formula of the compound, we need to find the ratios of the different elements present in the compound.

The first step is to convert the masses of each element to moles using their respective molar masses:

Carbon: 47.37 g / 12.01 g/mol = 3.94 mol

Hydrogen: 10.59 g / 1.01 g/mol = 10.48 mol

Oxygen: 42.04 g / 16.00 g/mol = 2.63 mol

Next, we divide each of the mole values by the smallest of the three, which is 2.63 mol:

Carbon: 3.94 mol / 2.63 mol = 1.50

Hydrogen: 10.48 mol / 2.63 mol = 3.98

Oxygen: 2.63 mol / 2.63 mol = 1.00

Now we need to convert these ratios to whole numbers by multiplying each by a common factor. The smallest ratio is 1.00, so we will multiply all the ratios by 2 to get:

Carbon: 1.50 x 2 = 3

Hydrogen: 3.98 x 2 = 8

Oxygen: 1.00 x 2 = 2

Therefore, the empirical formula of the compound is C3H8O2.

To know more about oxygen :-

brainly.com/question/13370320

#SPJ4

Answer:

B. Determine the amount of phosphorus in each sample.

D. Determine the number of different types of monomers in each sample.

Answer:

A and B

Explanation:

A and B are useful in correctly identifying the samples as the nitrogen content can be used to determine if the sample is a protein, and the phosphorus content can be used to determine if the sample is a nucleic acid. These two tests would allow the scientist to differentiate between the two types of biomolecules.

The new temperature of the gas can be calculated using the ideal gas law: PV = nRT. Rearranging the equation to solve for temperature, we get: T = (PV)/(nR). With a volume of 400 ml, a pressure of 1 atm, and a constant R of 0.08206 L·atm/K·mol, the new temperature of the gas is 59.95°C.

Answer:

88.42°C

Explanation:

The temperature change of a gas can be calculated using Gay-Lussac's law, which states that the pressure-volume ratio of a gas is directly proportional to its temperature. The equation is:

P1/V1 = P2/V2 = (nRT)/V = constant

where P1 and V1 are the initial pressure and volume, P2 and V2 are the final pressure and volume, n is the number of moles, R is the gas constant, and T is the temperature in Kelvin.

Given the initial volume and temperature, we can rearrange the equation to solve for the final temperature:

T2 = (P1V1)/(nR) * (V2/P1)

Since the pressure is constant, we can simplify the equation to:

T2 = T1 * (V2/V1)

We can convert the temperature to Kelvin:

T1(K) = 45 + 273.15 = 318.15 K

T2(K) = T1 * (400/350) = 318.15 * (400/350) = 361.57 K

Finally, we can convert back to Celsius:

T2(°C) = 361.57 - 273.15 = 88.42 °C

The new temperature is 88.42°C.


ALLEN

Answer:

792 moles.

Explanation:

When 66 moles of HNO3 are consumed, 6 x 66 = 396 moles of NO2 are produced.

Since the equation shows a 1:2 mole ratio between HNO3 and H2O, the number of moles of H2O produced is 2 x 396 = 792 moles.

The spinning top has a total of 3.032 x 10^23 atoms of copper, which was calculated using its mass and the molar mass of copper.

To determine the number of atoms of copper in the spinning top, we first need to calculate the number of moles of copper present in the top using the given mass and molar mass of copper.

mass of copper = 32.0 g

molar mass of copper = 63.55 g/mol

Number of moles of copper = mass/molar mass

= 32.0 g/63.55 g/mol

= 0.5038 mol

Next, we can use Avogadro's number to convert the number of moles of copper to the number of atoms of copper:

1 mol of Cu = 6.022 x 10^23 atoms of Cu

0.5038 mol of Cu = 0.5038 mol x 6.022 x 10^23 atoms/mol

= 3.032 x 10^23 atoms

Therefore, there are 3.032 x 10^23 atoms of copper in the spinning top

To learn more about Avogadro's number Click here:

brainly.com/question/11580870

#SPJ4

Answer:

Fatty acids methyl esters (FAMEs) are a class of biofuels derived from vegetable oils or animal fats and are commonly used as a diesel fuel substitute. FAMEs are suitable for analysis using gas chromatography (GC) because of their relatively high boiling points, which allow for efficient separation and detection of individual components.

Answer:

Fatty acids methyl esters (FAME) are suitable for analysis using gas chromatography (GC) due to their high volatility and thermal stability. These characteristics make FAMEs ideal for GC analysis because they can be vaporized and separated easily into their individual components. This is because the esterification of fatty acids to form FAMEs results in the introduction of a methyl group, which reduces the molecular weight and increases the volatility of the fatty acids. Additionally, the methyl ester functional group has a high smoking point, meaning that it can withstand high temperatures without breaking down, making it suitable for GC analysis where high temperature conditions are used to vaporize and separate the components. The use of GC in the analysis of FAMEs provides accurate and precise information on the composition of fatty acids in various samples, which is useful in applications such as the analysis of edible oils, biodiesel, and other lipid-containing materials.

Explanation:

The difference in temperature causes the transfer of heat from one point to another. Energy is transferred when one molecule collides with another. The correct option is B.

The process of transmission of energy from the particles of one medium to another as a result of the collision between the particles is defined as the conduction. An area with higher kinetic energy transfers thermal energy towards the area of lower kinetic energy.

When a substance is heated particles will gain more energy and vibrate more. These molecules then bump into nearby particles and transfer some of their energy to them. This then continues and passes the energy from hot end to the cold end.

Thus the correct option is B.

To know more about conduction, visit;

https://brainly.com/question/12136944

#SPJ9

Answer:

The mass of 2 moles of water is greater than the mass of 2 moles of carbon dioxide, which is greater than the mass of 2 moles of ozone.

2 moles of water has a mass of approximately 36 grams, whereas 2 moles of carbon dioxide has a mass of approximately 44 grams, and 2 moles of ozone has a mass of approximately 48 grams.

ALLEN

We're given that the enthalpy of formation of 1 mol of NH3 (aq) is -80.29 kJ/mol. This is the amount of energy it takes to form 1 mol of NH3 (aq).

To determine the enthalpy required to form 3 mol of NH3 (aq), multiply -80.29 by 3:

[tex]-80.29*3\\= -240.97[/tex]

b) -240.97 kJ

According to the stoichiometry of the given chemical equation, 5.6 moles  of magnesium are produced when 11.2 moles of lithium react.

Stoichiometry is the determination of proportions of elements or compounds in a chemical reaction. The related relations are based on law of conservation of mass and law of combining weights and volumes.

Stoichiometry is used in quantitative analysis for measuring concentrations of substances present in the sample.

In the given chemical equation, 2 moles of lithium gives 1 mole of magnesium , thus, 11.2 moles of lithium will yield 11.2×1/2=5.6 moles.

Thus, 5.6 moles  of magnesium will be  produced when 11.2 moles of lithium react.

Learn more about stoichiometry,here:

https://brainly.com/question/9743981

#SPJ9

An aqueous solution containing 35.5 g of an unknown molecular (non-electrolyte) compound in 158.6 g of water was found to have a freezing point of -1.4 ∘C. Therefore, 3.3 × 10² g/mol is the molecular mass.

The quantity of fill with a molecule is referred to as its molecular mass. It is also known as molecular weight.

It is computed by multiplying the mass for every atom by the amount of atoms belonging to the element that the molecule contains. Water, for example, is composed of two hydrogen atoms and one oxygen atom.

ΔT = i × Kf × m

m = ΔT / i × Kf

m = (1.4°C) / 1 × (1.86 °C/m) = 0.70 m

moles of solute = m × kg of solvent = 0.70 mol/kg × 0.1500 kg = 0.11 mol

M = 35.9 g/0.11 mol = 3.3 × 10² g/mol

Therefore,  3.3 × 10² g/mol is the molecular mass.

To know more about molecular mass, here:

https://brainly.com/question/2426621

#SPJ9

In order for 30mL of sodium hydroxide solution to completely react, 0.061 grams of potassium hydrogen phthalate are required.

A measurement of the amount of matter in an item, mass is a fundamental attribute of matter. It is a scalar quantity, usually expressed in grams (g) or kilograms (kg) (kg).

We must first develop and balance the chemical equation for the interaction between the two chemicals in order to determine the mass of potassium hydrogen phthalate needed to react with 30mL of sodium hydroxide at 0.01M. The correct answer is:

NaKC8H4O4 + H2O = KHC8H4O4 + NaOH

One mole of KHC8H4O4 combines with one mole of NaOH to create one mole of NaKC8H4O4 and one mole of water, as shown by the equation.

The number of moles of NaOH used in the reaction may then be calculated using the supplied NaOH concentration (0.01M) and the volume of NaOH used (30mL), using the formula:

volume x concentration equals moles of NaOH.

NaOH moles= 0.01 mol/L x 0.03 L x 0.0003 mol

We know that 0.0003 moles of KHC8H4O4 are required to thoroughly react with the NaOH utilized in the process because there is a 1:1 ratio in play.

Finally, using the formula: we can utilize the molar mass of KHC8H4O4 (204.22 g/mol) to determine the mass of KHC8H4O4 required.

mass = moles X molar mass

mass = 0.0003 mol X 204.22 mol = 0.061 g

Therefore, 30mL of 0.01M sodium hydroxide requires 0.061 grams of potassium hydrogen phthalate to completely react.

To know more about mass, visit:

https://brainly.com/question/15959704

#SPJ1

Answer: 30.3 g

I had this question..If i hadn't done this I'd be confused.

Answer:

A) 6.50 moles 0₂

Explanation:

In the reaction, 2 moles of Calcium oxide decomposes to produce 2 moles of Calcium and 1 mole of Oxygen gas.

So, when 6.50 moles of Calcium oxide decomposes, 6.50 x (1 mole O₂ / 2 moles Calcium oxide) = 6.50 x 0.5 = 3.25 moles of Oxygen gas will be produced.

And as 3.25 x 2 =  moles O₂,

Answer: Synthesis

Explanation:

This is Synthesis because the reactants combine to form the products.

Answer:

Grams to moles: 1 g/16 g/mol = 1/16 mol/g

Moles to grams: 1 mol/16 g/mol = 16 g/mol.

Explanation:

The two possible conversion factors that can be obtained from the molar mass for oxygen (which is approximately 16 g/mol) are:

Grams to moles: 1 g/16 g/mol = 1/16 mol/g

Moles to grams: 1 mol/16 g/mol = 16 g/mol.

The two possible conversion factors that can be obtained from the molar mass for oxygen are 1 mole of O and 1 gram of O.

When using molar mass for oxygen, there are two possible conversion factors:

These conversion factors can be used to convert between moles and grams of oxygen. For example, if you have the molar mass of oxygen (16 grams/mole), you can use the first conversion factor to convert grams to moles by dividing the given mass by the molar mass, or use the second conversion factor to convert moles to grams by multiplying the given number of moles by the molar mass.

https://brainly.com/question/33620664

#SPJ2

Answer: Decomposition

Explanation:

The compound, (Aluminum Oxide), decomposes to form Aluminum and Oxygen.

Answer:

172 ml

Explanation:

To determine the volume to which you should dilute 133 ml of a 7.95 M CuCl2 solution so that 52.0 mL of the diluted solution contains 4.20 g of CuCl2, you need to use the equation for molarity:

M = moles of solute / liters of solution

We know the moles of solute, which can be calculated from the mass of CuCl2 using the molar mass:

4.20 g CuCl2 / (1 mole CuCl2 / 134.45 g CuCl2) = 0.0311 moles CuCl2

And we know the volume of the diluted solution, which is 52.0 mL or 0.052 L. Plugging in these values, we can solve for the molarity of the diluted solution:

M = 0.0311 moles CuCl2 / 0.052 L = 0.596 M

Now that we know the molarity of the diluted solution, we can use the equation for dilution to determine the volume to which we should dilute the original solution:

C1V1 = C2V2

Where C1 and V1 are the concentration and volume of the original solution and C2 and V2 are the concentration and volume of the diluted solution. Plugging in the values, we have:

7.95 M * V1 = 0.596 M * 0.133 L

Solving for V1, we get:

V1 = 0.133 L * 0.596 M / 7.95 M = 0.0172 L = 172 mL

So, to achieve the desired concentration in 52.0 mL of the diluted solution, you should dilute 133 mL of the 7.95 M CuCl2 solution to a volume of 172 mL

Density and mass concentration have the same numerical value for a pure substance. Density can be important to packaging, purity, and buoyancy because different materials typically have varied densities.

What is density?

At normal temperatures and pressures, osmium and iridium are the densest elements that are currently known.

The dimensionless number "relative density" or "specific gravity," which is the ratio of the material's density to that of a standard material, typically water, is occasionally used to substitute density in order to make density comparisons across different systems of units simpler.

As a result, if a substance has a relative density lower than one in comparison to water, it floats.

We know that

Density = mass / volume  

And volume = L*W*H (thickness)

First calculate the volume of foil as follows:

Density = mass / volume

Volume = mass / density  

= 2.722 g/ 7.26 g/ cm^3

= 0.375 cm^3

And volume = = L*W*H (thickness)

0.375 cm^3 = 5cm*5 cm * thickness

Thickness = 0.015 cm

To know more about density, click the link given below:

brainly.com/question/29775886

#SPJ1

1 ppm of F- means 1 mg of F- in 1 L of water. The cylindrical water has a volume of 12.3 × 10⁸ L. Then, 12.38 × 10⁵ g of F- have to be added to the reservoir.

PPM or parts per million is a term used to express the concentration of a substance. One  ppm of a substance is its 1 mg in 1 L. Hence, 1 mg of F- is present in 1 L of water.

Volume of cylinder = π r² d

given that, diameter = 353 m

radius = 176.5 m

d= 12.65 m

v = 3.14 × (176.5)²×12.65 = 12.37× 10⁵ m³ = 12.37 × 10⁸ L.

1 L have 1 mg F-. Then, 12.37 × 10⁸ mg or 12.37 × 10⁵ g of F-.

Molar mass of NaF  = 46 g/mol

46 g of NaF contains 19 g of F-. Then, mass of NaF that contains 12.37 × 10⁵ g of F- is:

12.37 × 10⁵ g × 46/19 = 2.97×10⁷ g.

Therefore, 2.97×10⁷ g of NaF  contains 12.37 × 10⁵ g of F-.

Find more on ppm :

https://brainly.com/question/14598158

#SPJ9

The correct number of protons, neutrons, and electrons in a neutral atom of Sn is 50 protons, 68 neutrons, 50 electrons.

Neutral atom of Sn

Atomic number of Sn is 50 .

As we know

Atomic number = no. of protons = no. of electrons

then ,

Number of protons = 50

Number of electrons = 50

Now , atomic mass = no. of protons + no. of neutrons

Atomic mass of Sn is 118 u

Therefore , 118 = 50 + number of neutrons

Number of neutrons = 118 -50

Number of neutrons = 68

Hence, in a neutral atom of Sn , there are 50 protons , 68 neutrons , 50 electrons. option (c) is correct .

Learn more about protons, neutrons and electrons from the link given below.

https://brainly.com/question/29762503

#SPJ4

The chemical equation given above is an example of double replacement reaction (option D).

Chemical reaction is a process, typically involving the breaking or making of interatomic bonds, in which one or more substances are changed into others.

A chemical reaction can be of various types as follows:

A double replacement reaction involves the substitution of two substances in the reaction. In the above equation, silver and sodium is replaced.

Learn more about double replacement reaction at: https://brainly.com/question/19267538

#SPJ1