Select all that apply.

Two possible reasons for Akhenaten changing to a monotheistic belief system are _____.

We can see here that the statement that is correct will be: B. The rock display with larger holes shows petroleum drilling, which is deep underground.

A geologist is a scientist who focuses on the solid components of the Earth, such as minerals and rocks, as well as the processes that shape the planet's surface.

Geologists study the make-up, structure, and past of the Earth's crust in order to comprehend geological processes including mountain creation, earthquake and volcanic activity, and the exploitation of natural resources. They frequently perform fieldwork, gathering samples, running surveys, and researching geological formations.

Learn more about geology on https://brainly.com/question/830768

#SPJ1

The complete question is that:

Your class goes on a field trip to observe drilling machinery. The geologists at the drill site show you displays of drilled rocks to compare different types of drills and methods. The drilled holes in one rock display are significantly larger than the holes drilled in the display next to it. Given this information, which statement is correct? (1 point)

A. The rock display with smaller holes shows copper drilling, which is deep underground.

B. The rock display with larger holes shows petroleum drilling, which is deep underground.

C. The rock display with smaller holes shows petroleum drilling, which is closer to the surface.

D. The rock display with larger holes shows copper drilling, which is closer to the surface.

"Bessie Smith, St. Louis Blues" is a classic example of the Blues genre. Here are some Blues elements you can hear in the song:

12-bar blues chord progression: The song follows a standard 12-bar blues chord progression, which is a common feature of Blues music.

Call and response: The lyrics and melody are structured in a call-and-response format between the lead vocalist and the band, which is another common element of Blues music.

Soulful vocal delivery: Bessie Smith's powerful, emotional vocal delivery is characteristic of the Blues genre. She uses a lot of vibrato, melisma, and other vocal techniques to convey the feeling of the song.

Blues scale: The melody and solos in the song are based on the Blues scale, which consists of the root, flat third, fourth, flat fifth, fifth, and flat seventh notes of the major scale.

Use of blue notes: The use of blue notes, which are microtonal notes that fall in between the pitches of the standard major scale, is another hallmark of the Blues genre.

The fact that each component is connected between the same set of electrically common locations characterizes a parallel circuit.

The battery and each resistor are connected between these two groups of points. This indicates that all components in a parallel circuit have the same voltage (V) drop.

All of the components in a parallel circuit are linked across one another to create precisely two sets of electrically coupled points.

A "branch" is a channel for electric current created by one of the load components, like a resistor, in a parallel circuit. More than two circuit components can be connected in two basic ways: series and parallel. In order to build more sophisticated series-parallel circuits, these two fundamental connection techniques can be combined.

Thus, The fact that each component is connected between the same set of electrically common locations characterizes a parallel circuit.

Learn more about Parallel circuit, refer to the link:

https://brainly.com/question/32539613

#SPJ1

The equation KE = 0.5*m*v2 may be used to determine the kinetic energy of a 0.5 kilogramme basketball travelling through the air at 10 m/s.

Given that the ball's mass is 0.5 kg and its speed is 10 m/s, its kinetic energy equals 25 J (0.5 * 0.5 * 10 * 10). The energy an item has as a result of motion is known as kinetic energy.

It is the energy an object has as a result of motion, and it is equivalent to the effort necessary to propel the item from rest to its present velocity. Since kinetic energy is inversely related to velocity, it will increase by a factor of four if the ball's velocity is twice.

Learn more about  kinetic energy at:

https://brainly.com/question/26472013

#SPJ1

Answer:

The atomic and molecular interactions unveil the bulk properties of matter in our environment by ways of the fact that everything in the whole universe is made of either atoms, molecules or even ions

How matter is made up of atoms and molecules?

It has been proven practically everything in the whole universe is matter and everything which interact with matter is also matter. This explains to us the reasons why matter could be atoms, molecules or ions.

That being said, some substances (matter) is made up of atoms of elements, some made up of molecules or atoms and molecules and others ions or both. However, matter is anything which has mass and occupies space.

In conclusion, we can now conclude from the explanation above that the properties of matter are as a result of the interaction which exists between matter at the atomic and molecular level.

The weight of the 100 kg object on the surface of the planet is approximately 8.9 × 10¹² Newtons.

To calculate the weight of a 100 kg object on the surface of a planet, we need to use the formula for gravitational force:

F = (G * M * m) / r²

Where:

F is the gravitational force (weight)

G is the gravitational constant (approximately 6.67430 × 10⁻¹¹ N m²/kg²)

M is the mass of the planet (4.8 × 10²⁴ kg)

m is the mass of the object (100 kg)

r is the radius of the planet (diameter / 2)

Given that the diameter of the planet is 12,000 km, we can find the radius by dividing it by 2:

r = 12,000 km / 2 = 6,000 km = 6,000,000 m

Now, we can substitute the values into the formula:

F = (6.67430 × 10⁻¹¹ N m²/kg² * 4.8 × 10²⁴ kg * 100 kg) / (6,000,000 m)²

Simplifying the expression:

F = (6.67430 × 10⁻¹¹ N m²/kg² * 4.8 × 10²⁶ kg) / 36,000,000,000 m²

F ≈ 8.9 × 10¹² N

Therefore, the weight of the 100 kg object on the surface of the planet is approximately 8.9 × 10¹² Newtons.

For more such questions on weight visit:

https://brainly.com/question/86444

#SPJ11

Answer:

Hokkaido, Japan

Explanation:

earth quakes are natural there

A mechanical wave propagates through a medium by physical motion. Example: sound wave or seismic wave.

A mechanical wave is a kind of wave that multiplies through a medium, similar to a solid, liquid, or gas, through real development of the particles of the medium. The development of the particles makes a disturbance in the medium, which then, makes some separation from the wellspring of the exacerbation as a wave. A delineation of a mechanical wave is a sound wave, which is made by the vibration of air particles. Right when a sound is conveyed, it causes a disrupting impact in the enveloping air, making areas of stuffed and slim air that development away from the wellspring of the sound as a wave. Another representation of a mechanical wave is a seismic wave, which is made by a tremor and goes through the ground.

To learn more about mechanical wave, refer:

https://brainly.com/question/13829531

#SPJ1

The torque on the loop increases by a factor of 16.

option D.

The torque on a wire loop in a magnetic field is given by the equation:

τ = NIABsinθ

Where;

If the radius of the wire is doubled, then the area of the loop becomes four times larger.

Also, if the current flowing through the wire is quadrupled, then the torque becomes four times larger.

The torque on the loop increases by a factor of 4 x 4 = 16.

Learn more about torque here: https://brainly.com/question/14839816

#SPJ1

The pattern of planetary speeds and distance does not support the amateur astronomer's estimated distance of the asteroid being 13.5 AU from the Sun.

According to Kepler's laws of planetary motion, the speed of a planet or asteroid in its orbit is inversely proportional to its distance from the Sun. This means that as the distance from the Sun increases, the speed of the object should decrease.

Looking at the known planets in our solar system, we observe that the outer planets, such as Neptune and Uranus, have slower speeds compared to the inner planets, such as Mercury and Venus. This is consistent with the inverse relationship between speed and distance. However, the estimated speed of the discovered asteroid, 8 km/sec, is relatively high.

Given that the asteroid is moving at such a high speed, it suggests that its distance from the Sun should be closer, rather than at 13.5 AU. At that distance, the asteroid would be expected to have a slower speed.

Therefore, based on the established pattern of planetary speeds and distance, the estimated distance of 13.5 AU for the asteroid does not align with the expected speed. It is more likely that the asteroid is closer to the Sun than the estimated distance, possibly within the inner regions of the solar system. Further observations and calculations would be necessary to accurately determine its true distance from the Sun.

For more such questions on planetary ,

https://brainly.com/question/28610721

#SPJ11

The coil will align itself vertically, with one end (end b) pointing towards the Earth's surface and the other end (end a) pointing upwards, due to the interaction between the counterclockwise current flow and Earth's downward-pointing magnetic field lines in the northern hemisphere.

When a solenoid with a current-carrying coil is suspended by a thread in the horizontal plane, and the electrons move clockwise when viewed from end a toward end b, the coil will align itself in Earth's magnetic field based on the interaction between the current and the magnetic field.

Earth has a magnetic field that extends from its magnetic north pole to its magnetic south pole. The magnetic field lines form loops around the Earth. In the northern hemisphere, the magnetic field lines point downward into the Earth, while in the southern hemisphere, they point upward.

Based on the right-hand rule, which states that if you point your thumb in the direction of the current, the fingers will curl in the direction of the magnetic field, we can determine how the coil will align itself.

Given that the electrons in the coil move clockwise from end a to end b, the current flows in the opposite direction, counterclockwise, from end b to end a.

Using the right-hand rule, if we align our right hand with our thumb pointing in the counterclockwise direction (opposite to the current flow), the magnetic field lines from Earth would be represented by the direction in which our fingers curl.

Since the magnetic field lines in the northern hemisphere point downward into the Earth, the coil will align itself such that the bottom of the coil (end b) will be attracted towards the Earth's surface, while the top of the coil (end a) will point upwards.

For more such questions on counterclockwise visit:

https://brainly.com/question/9238896

#SPJ11

The angular speed of the fan is 11.31 radians per second, and the net torque on the fan is 0.0655 Nm.

Rotational motion refers to the movement of an object around an axis or a fixed point, where the object rotates or spins about the axis or point. This motion can be described in terms of angular displacement, velocity, acceleration, and momentum.

To solve this problem, we can use the principles of rotational motion and apply them to the fan blades.

First, let's convert the given angular speed of the fan from revolutions per minute (RPM) to radians per second:

108 RPM = 108/60 = 1.8 revolutions per second

1 revolution = 2π radians, so 1.8 revolutions = 1.8 x 2π radians = 11.31 radians

Therefore, the angular speed of the fan is 11.31 radians per second.

Next, we can use the formula for the rotational kinetic energy of a rigid body:

K = (1/2) I ω^2

where K is the rotational kinetic energy, I is the moment of inertia, and ω is the angular speed.

For a system of four rods connected at their ends, the moment of inertia can be calculated as:

I = (1/3) m L^2

where m is the mass of each blade, L is the length of each blade, and we assume that the blades are thin rods rotating about their centers.

Substituting the given values, we get:

I = (1/3) (0.35 kg) (0.6 m)^2 = 0.0252 kg m^2

Now we can use the given time of 4.35 seconds to find the angular acceleration of the fan:

α = ω/t = 11.31 radians/4.35 seconds = 2.6 radians/second^2

Finally, we can use the formula for torque and the moment of inertia to find the net torque on the fan:

τ = I α

τ = (0.0252 kg m^2) (2.6 radians/second^2) = 0.0655 Nm

Therefore, the net torque on the fan is 0.0655 Nm.

To learn more about the moment of inertia click:

brainly.com/question/15246709

#SPJ1

The required length of L which is the distance from the grating to screen is: 8.696 cm

The event of deviating the wave from the original path of propagating due to obstruction of any obstacle. Diffraction happens near the slit, edges, or corners of the object. Interference differs from the diffraction in such a way that in interference, only some waves are considered.

We are given that:

Grating: n = 3300 lines/cm

The shortest wavelength is: λs = 400 nm

The longest wavelength is: λl = 700nm

The distance limited is: y = 2.15 cm

The expression for separation of slit is given for the second order as,

d sin θ = mλ

Here,

d is spacing,

m is the order.

Calculate the value of spacing.

d = 1/n

d = 1/3300

d = 0.0003030 cm

d = 3030.30 nm

Substituting the value in the above expression for shorter wavelength,

3030.30 sinθ = 2 * 400

sinθ_s = 800/3030.30

sinθ_s = 0.264

θ_s = 15.31°

Substituting the value in the above expression for longer wavelength,

3030.30 sinθ = 2 * 700

sinθ_l = 1400/3030.30

sinθ_l = 0.462

θ_l = 27.52°

Now, for expression for the distance from the grating to screen is calculated as:

L = y/(tan θ_l - tan θ_s)

L = 2.15/(tan 27.52° - tan 15.31)

L = 8.696 cm

Read more about diffraction Grating at: https://brainly.com/question/13104464

#SPJ1

The correct answer is C. The capacitance remains unchanged. Capacitance is a measure of the ability of a capacitor to store charge and is determined by the physical characteristics of the capacitor, such as the surface area of the plates and the distance between them. Doubling the charge on the plates does not change these physical characteristics, so the capacitance remains unchanged.

The differential in air pressure on the ball's various sides allows a spinning ball to provide more lift than a non-spinning ball, in accordance with Bernoulli's principle.

According to Bernoulli's principle, the pressure of a fluid decreases as the fluid's velocity increases. A ball is pushed in the opposite direction by a force produced by lower pressure, possibly producing more lift.

The lift is given to the ball by the air because the right side air moves in the same direction of the motion of the ball while the lift side goes into the opposite direction that creates a difference in the air pressure and more lift is the result.

To know more about Bernoulli's principle, visit,

https://brainly.com/question/13344039

#SPJ1

The net force on particle q3 is approximately -0.337 N.

To determine the net force on particle q3, we need to calculate the forces exerted on it by particles q₁ and q2.

The force between two point charges can be found using Coulomb's law, which states that the force (F) between two point charges is directly proportional to the product of their charges (q₁ and q₂) and inversely proportional to the square of the distance (r) between them.

Mathematically, Coulomb's law can be expressed as:

F = k * (q₁ * q₂) / r²

Where k is Coulomb's constant, which is equal to 9 × 10^9 N⋅m²/C².

Using this formula, we can calculate the forces between the particles:

Force between q₁ and q3:

F₁₃ = k * (q₁ * q₃) / r₁₃²

F₁₃ = 9 × 10^9 * (-75.8 × 10^-6) * (-84.2 × 10^-6) / (0.432)^2

F₁₃ ≈ 0.465 N (pointing to the left)

Force between q₂ and q3:

F₂₃ = k * (q₂ * q₃) / r₂₃²

F₂₃ = 9 × 10^9 * (90.6 × 10^-6) * (-84.2 × 10^-6) / (0.876 + 0.432)^2

F₂₃ ≈ 0.128 N (pointing to the left)

The net force on particle q3 is the vector sum of these two forces, which are pointing in opposite directions:

F_net = F₂₃ - F₁₃

F_net ≈ 0.128 N - 0.465 N

F_net ≈ -0.337 N (pointing to the left)

Therefore, the net force on particle q3 is approximately -0.337 N, which means it is being pulled to the left by the other two particles.

For more such questions on force, click on:

https://brainly.com/question/12785175

#SPJ11

If you are riding in a firetruck with the siren blaring, you will experience the Doppler effect as the pitch of the siren will change depending on whether the firetruck is approaching or moving away from you.

If you are riding in a firetruck with the siren blaring, you will indeed experience the Doppler effect. The Doppler effect is the perceived change in frequency of a sound wave due to the relative motion between the source of the sound and the observer.

In the case of a firetruck siren, as the firetruck moves towards you, the sound waves emitted by the siren are compressed, resulting in an increased frequency. This increase in frequency leads to a higher pitch or a higher perceived sound. As a result, you will hear the siren with a higher pitch than its actual frequency.

Conversely, as the firetruck moves away from you, the sound waves emitted by the siren are stretched, resulting in a decreased frequency. This decrease in frequency leads to a lower pitch or a lower perceived sound. Therefore, when the firetruck is moving away from you, you will hear the siren with a lower pitch than its actual frequency.

The change in pitch is caused by the relative motion between the firetruck (the source of the sound) and the observer (you). This phenomenon is a characteristic feature of the Doppler effect.

It's worth noting that the perceived change in pitch may be more noticeable when the firetruck is moving at high speeds, as the relative motion between the firetruck and the observer is greater. Additionally, other factors like the surrounding environment, background noise, and the direction of the sound waves can also affect the perception of the Doppler effect.

For more such questions on Doppler effect visit:

https://brainly.com/question/28106478

#SPJ11

To obtain the type, orientation, location and magnification of the image, we shall first obtain the location (i.e distance) of the image from the mirror. Details below:

The location i.e distance of the image can be obtained as follow:

1/f = 1/v + 1/u

Rearrange

1/v = 1/f - 1/u

v = (f × u) / (u - f)

v = (12 × 24) / (24 - 12)

v = 288 / 12

v = 24 cm

Thus, the the location of the image is 24 cm

Since the location of the image is positive (i.e 24 cm). Thus,

Now, we shall obtain the magnification of the image. Details below:

Magnification = image distance (v) / object distance (u)

Magnification = 24 / 24

Magnification = 1

Learn more about distance:

https://brainly.com/question/13152512

#SPJ1

The value of  force b if the magnitude the force is 26N is determined as 24 N.

The value of force is calculated by applying the formula for determining the magnitude of a force as shown below;

The magnitude of a force is calculated as;

F = √ x² + y²

where;

The given magnitude of the force = 26 N

The x component of the force = 10

The y component of the force = b

26 = √ ( 10²  + b² )

26² = 10² + b²

676 = 100 + b²

b² = 676 - 100

b² = 576

b = √ 576

b = 24 N

Learn more about force component here: https://brainly.com/question/30491683

#SPJ1

The final temperature of the mixture formed by adding the water is most likely 30°.

The rule of conservation of energy is demonstrated by the calorimetric principle, which states that the total amount of heat lost by a hot body is equal to the total amount of heat acquired by a cool body.

Heat lost = Heat gain

50 x 4.18 x (T - 10) = 50 x 4.18 x (80 - T)

T - 10 = (80 - T)

T - 10 = 80 - 2T

3T = 90

Therefore, the final temperature of the mixture,

T = 90/3

T = 30°

To learn more about calorimetric principle, click:

https://brainly.com/question/30884598

#SPJ1

The dynamic viscosity of oxygen at 40°C and 160 kPa is 64.17 × 10⁻⁶ Pa.s.

The dynamic viscosity of a fluid is equal to its kinematic viscosity multiplied by its density.

Given:

Kinematic viscosity of oxygen at 40°C and 160 kPa = 0.104 stokes

Density of oxygen at 40°C and 160 kPa = (160000 Pa / 0.2598 kPa.m³) = 616.55 kg/m³ (using ideal gas law)

Using the formula:

Dynamic viscosity = Kinematic viscosity * Density

We get:

Dynamic viscosity of oxygen = 0.104 stokes * 616.55 kg/m³ = 64.17 × 10⁻⁶ Pa.s

Therefore, the dynamic viscosity of the oxygen at 40°C and 160 kPa is 64.17 × 10⁻⁶ Pa.s.

Learn more about kinematics here:

https://brainly.com/question/26407594

#SPJ1

Tamir's argument is more convincing than Shoshauna's argument. This is because Tamir's argument provides a more thorough explanation for why the material appears green instead of blue.

Tamir explains that the material appears green because it is reflecting green light into someone's eyes, not blue light.

This shows a clear understanding of the physics of light and how it interacts with materials. In contrast, Shoshauna's argument only states that the material appears green, without providing any explanation or reasoning for why this is the case.

Therefore, Tamir's argument is more convincing as it provides a logical explanation for why the material appears green instead of blue.

Read more on light reflection here:https://brainly.com/question/26655381

#SPJ1

Answer:

Alternating current

Explanation:

We know that electric current is defined as the electric charge divided by time.

There are two types of current i.e. direct current (D.C) and alternating current (A.C)

Direct current: The flow of electric charge in one direction is called as direct current. It was produced firstly by Alessandro Volta in 1800. One of the examples of direct current is the battery.

Alternating current: The flow of electric charges that reverses the direction periodically is known as alternating current.

The magnitude of the force exerted by the floor on the beetle is approximately 1.33 Newtons.

To determine the magnitude of the force exerted by the floor on the beetle, we need to consider the conservation of energy. As the beetle pushes against the floor and raises its center of mass, the work done by the force exerted by the floor is equal to the change in potential energy of the beetle.

First, let's calculate the change in potential energy. The height change from the initial position on the floor to the final height above the floor is 290 mm - 0.75 mm = 289.25 mm, which we need to convert to meters: 289.25 mm = 0.28925 m.

The change in potential energy can be calculated using the formula: ΔPE = mgh, where m is the mass of the beetle and g is the acceleration due to gravity. Since the mass of the beetle is given as 3.4 × 10^(-6) kg, and g is approximately 9.8 m/s², we have:

ΔPE = (3.4 × 10^(-6) kg) × (9.8 m/s²) × (0.28925 m) = 1.0 × 10^(-6) J.

According to the work-energy principle, the work done by the force exerted by the floor is equal to ΔPE. Therefore, the magnitude of the force exerted by the floor on the beetle is:

Force = ΔPE / distance = (1.0 × 10^(-6) J) / (0.75 mm) = 1.33 N.

For such more questions on force

https://brainly.com/question/26553026

#SPJ8

The melody in 12-bar blues often includes the feature "call and response," which is also found in some work songs.

Call and response is a musical pattern where a lead vocalist or instrumentalist (the "call") performs a musical phrase, and another vocalist or group of musicians (the "response") answers with their own phrase. This interaction creates a dynamic conversation within the music, engaging both the performers and the audience. The 12-bar blues is a popular chord progression in blues music, consisting of three chords over a repeating 12-bar structure.

This form is prevalent in African American musical traditions, including work songs, spirituals, and blues. Call and response, as a key feature of these genres, can be observed in the vocal and instrumental exchanges in 12-bar blues compositions. While bebop and ragtime are also significant musical styles, they are not directly associated with the melodic feature in question.

Bebop is a fast-paced and complex form of jazz, characterized by intricate melodies and improvisation. Ragtime, on the other hand, is an early 20th-century piano-based music style that emphasizes syncopation and a lively rhythm. In summary, the 12-bar blues often features call and response, a musical pattern that promotes interaction and engagement and is also present in work songs. This characteristic helps create a dynamic and captivating musical experience for both performers and listeners.

know more about chords here:

https://brainly.com/question/17023621

#SPJ11

The velocity of the car at the end of the initial ten-second interval is 25.5 m/s.

Let's assume that the velocity of the car at the end of the initial ten-second interval is v. We know that the initial velocity of the car is 30 m/s, and it experiences an average acceleration of a1 during the first ten seconds.

Using the equation of motion: v = u + at, where v is the final velocity, u is the initial velocity, a is the average acceleration, and t is the time, we can write:

v = 30 + a1 * 10

During the next five seconds, the car slows down further to a velocity of 24 m/s and experiences an average acceleration of a2. So, we can write:

24 = v + a2 * 5

Now, we are given that the ratio of the average acceleration values is a1/a2 = 1.5. Therefore, we can substitute a1 = 1.5a2 in the first equation:

v = 30 + (1.5a2) * 10

v = 30 + 15a2

Substituting this value of v in the second equation, we get:

24 = 30 + 15a2 + a2 * 5

-6 = 20a2

a2 = -6/20

a2 = -0.3 m/s²

Substituting this value of a2 in the first equation, we can solve for v:

v = 30 + (1.5 * -0.3) * 10

v = 30 - 4.5

v = 25.5 m/s

Therefore, the velocity of the car at the end of the initial ten-second interval is 25.5 m/s.

For more such questions on velocity

https://brainly.com/question/80295

#SPJ11

The acceleration of the body is 4.5 m/s^2.

First, let's convert the initial velocity and final velocity from m/s to km/h:

Initial velocity = 30 m/s = (30/1000) * 3600 = 108 km/h

Final velocity = 80 m/s = (80/1000) * 3600 = 288 km/h

Let the time taken to accelerate to 288 km/h be t1, and the time taken to decelerate from 288 km/h to rest be t2. Since the time spent at constant velocity is twice the time spent accelerating, it is 2t1.

The distance covered during acceleration and deceleration can be calculated using the formula:

distance = (initial velocity * time) + (0.5 * acceleration * time^2)

For acceleration:

distance1 = (108 * t1) + (0.5 * a * t1^2)

For deceleration:

distance2 = (288 * t2) + (0.5 * (-a) * t2^2)

Since the total time taken for the journey is 40, we have:

t1 + 2t1 + t2 = 40

3t1 + t2 = 40

Also, the total distance traveled is given as 2550 km:

distance1 + distance2 = 2550

Substituting the expressions for distance1 and distance2, we get:

(108 * t1) + (0.5 * a * t1^2) + (288 * t2) - (0.5 * a * t2^2) = 2550

Simplifying the above equation:

108t1 + 144t1^2/a + 288t2 - 0.5t2^2a = 2550

Now, we have three equations with three variables (a, t1, t2). We can solve these equations to obtain the value of acceleration (a).

From the first equation, we have:

t2 = 40 - 3t1

Substituting this value of t2 in the equation for distance2, we get:

distance2 = 288(40 - 3t1) - 0.5*a(40 - 3t1)^2

Substituting the values of distance1 and distance2 in the equation for total distance, we get:

(108 * t1) + (0.5 * a * t1^2) + 288(40 - 3t1) - 0.5*a(40 - 3t1)^2 = 2550

Simplifying the above equation and solving for a, we get:

a = 4.5 m/s^2
For more such questions on acceleration ,click on:

https://brainly.com/question/460763

#SPJ11