Shiva bought a second hand motorcycle for rupees 153200 . He spent rupees 1200 to repair it and sold to Vishnu at 8% loss .How much did Vishnu pay for it ?​

μx​ = $58.2 thousand, σx​ = $1.1 thousand | b. μ−​ = $58.2 thousand, σxˉ​ = $0.55 thousand | c. D. No, because the sample sizes are sufficiently large so that the sample means will be approximately normally distributed, regardless of the distribution of the population.

The sampling distribution of the sample mean for samples of size 64 has a mean of μx = $58.2 thousand and a standard deviation of σx = $8.8 thousand.

No, it is not necessary to assume that classroom teacher salaries are normally distributed to answer parts (a) and (b).

The correct answer is: D. No, because the sample sizes are sufficiently large so that the sample means will be approximately normally distributed, regardless of the distribution of the population.

Learn more about approximately

brainly.com/question/31695967

#SPJ11

The number line (-2, 6] is correctly represented by option a) (-2, 6].

Option a) (-2, 6] denotes an open interval, which means that it includes all real numbers greater than -2 and less than or equal to 6. The square bracket on the right side indicates that the endpoint 6 is included in the interval.

Option b) {x | -2 < x ≤ 6} represents a closed interval, which means that it includes all real numbers greater than -2 and less than or equal to 6. However, it uses set notation instead of interval notation.

Option c) (-∞, -2] ⋃ (6, ∞) represents a union of two intervals. The first interval (-∞, -2] includes all real numbers less than or equal to -2, and the second interval (6, ∞) includes all real numbers greater than 6. This option does not correctly represent the given number line.

Option d) {x | x < -2 or x ≥ 6} represents the set of all real numbers that are less than -2 or greater than or equal to 6. This option does not correctly represent the given number line.

Therefore, the correct representation for the number line (-2, 6] is option a) (-2, 6].

To know more about interval visit-

brainly.com/question/24242603

#SPJ11

Rena wrote all integers from 1 to 12. How many digits did she write?Rena wrote all the integers from 1 to 12. To find out the number of digits she wrote, we will need to count the number of digits she wrote between 1 and 12 inclusive.

In between 1 and 12, we have the following numbers:{1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12}The integers from 1 to 9 are single-digit numbers, so Rena wrote 9 digits to represent these integers. For integers from 10 to 12, Rena wrote 2 digits each. So the number of digits Rena wrote is:9 + 2(3) = 9 + 6 = 15Therefore, Rena wrote 15 digits.More than 120 words:We can also apply the formula to find the number of digits required to write an integer n. The formula is given by 1+ floor(log10(n)).

Therefore, to find the number of digits Rena wrote, we can calculate the number of digits required to write each of the integers from 1 to 12 and then add them up. Let's see how this works:1 has one digit2 has one digit3 has one digit4 has one digit5 has one digit6 has one digit7 has one digit8 has one digit9 has one digit10 has two digits11 has two digits12 has two digitsUsing the formula above, we can calculate the number of digits Rena wrote as:1 + 1 + 1 + 1 + 1 + 1 + 1 + 1 + 2 + 2 + 2= 15Therefore, Rena wrote 15 digits.

To know more about integers visit :

https://brainly.com/question/490943

#SPJ11

There are no other possible triangles since the sum of two angles in a triangle must always be less than 180°. Hence, there is only 1 triangle that exists, and the answer is 1.

The given sides and angle are b = 500, c = 330, and y-37.

Let's consider the given diagram below.

From the given diagram, we can write;

sin(y-37) = 330/500

sin(y-37) = 0.66

y - 37 = sin^(-1)(0.66)y - 37

= 42.69°

Now, we can use the Law of Sines to determine the possible triangles:

Triangle 1, Using the Law of Sines:

(500)/sin(y) = (330)/sin(42.69)

Solving for y, we get;

y = sin^(-1)((sin(42.69)*500)/330)y

= 61.31°

Therefore, the first triangle has angles of 42.69°, 61.31°, and 76°.

Triangle 2

There are no other possible triangles since the sum of two angles in a triangle must always be less than 180°. Hence, there is only 1 triangle that exists, and the answer is 1.

To know more about triangle visit:

https://brainly.com/question/2773823

#SPJ11

The manager of a bank with 50,000 customers commissions a survey to gauge customer views on internet banking, which would incur lower bank fees.

The proportion of interest in internet banking is calculated using the following formula:28% = (interested customers/total customers) x 10028/100 = interested customers/350

Therefore, interested customers = (28/100) x 350

interested customers = 98

Approximately 98 customers expressed their interest in switching to internet banking that would lower their bank fees.

Therefore, the manager can estimate that around 98 customers will consider changing to internet banking that incurs lower bank fees. As there are 50,000 customers in total, the proportion of those who would switch is 98/50,000.

To know more about internet banking visit:

https://brainly.com/question/28828314

#SPJ11

The given equation is x = 2et, y = t − t2. We have to find the area enclosed by the x-axis and the curve.

Let's begin solving this step-by-step:Step 1: We have [tex]x = 2et, y = t − t2[/tex]to obtain the limits of t.

For that, we equate y to zero:t - t² = 0t (1 - t) = 0Therefore, t = 0 and t = 1.Step 2: We are given that x = 2et. Therefore, we obtain x in terms of t by substituting for e:

We know that[tex]e = 2.71828182846x = 2*2.71828182846t = 5.43656365692tStep 3[/tex]:

The area enclosed between the curve and the x-axis is given by the integ[tex][tex]t - t² = 0t (1 - t) = 0Therefore, t = 0 and t = 1.Step 2:[/tex]ral:∫(0 to 1) (x dt)[/tex]Now, substituting the value of x obtained in step 2, we have:

∫(0 to 1) (5.43656365692t dt)Solving this integral, we get:Area = 2.71828 sq. unitsThis is how we calculate the area enclosed by the x-axis and the curve [tex]x = 2 et, y = t − t2.[/tex]

To know more about curve visit:

https://brainly.com/question/32496411

#SPJ11

R2 = SSxy / SSyyWhere SSxy is the sum of squares of regression and SSyy is the total sum of squares of y. Hence, using the given data:R2 = SSxy / SSyy= 5268 / 13,483= 0.391 or 39.1% Thus, approximately 39.1% of the variability in the volume of pine trees can be accounted for by size (circumference).

The regression line for predicting y from x:In linear regression, the regression equation that can be used to predict y for any given x value is given by: y = a + bx Where, a is the y-intercept and b is the slope of the regression line. The slope of the regression line is given by: b = SSxy / SSxx Where, SSxy is the sum of squares of regression and SSxx is the total sum of squares of x. Hence, using the given data: b = SSxy / SSxx= 5268 / ((1384^2) - (37(25.7)^2))= 0.372The y-intercept

a = y¯ - bx¯ Where x¯ and y¯ are the mean of x and y respectively. Hence, using the given data: x¯ = Sigma x / n= 1384 / 37= 37.51and y¯ = Sigma y / n= 1346 / 37= 36.38a = y¯ - bx¯= 36.38 - (0.372 × 37.51)= 22.51Therefore, the regression line for predicting y from x is: y = 22.51 + 0.372x (in cubic feet)

To know more about regression visit:

https://brainly.com/question/32505018

#SPJ11

We may multiply the magnitudes and add the angles to determine the product of the complex numbers 5 (cos 40° + i sin 40°) and 8 (cos 95° + i sin 95°).

The magnitudes are first multiplied: 5 x 8 = 40.

The angles are then added: 40° + 95° = 135°.

As a result, the product can be expressed as 40(cos 135° + i sin 135°) in polar form.

We can apply the following trigonometric identities to transform this into rectangular form:Sin() = sin(135°) = 2/2 cos() = cos(135°) = -2/2

Therefore, the rectangle product is 40 * (- 2/2 + i 2/2).

To further simplify, we have: -202 + 20i2.

In rectangular form, the complex numbers 5 (cos 40° + i sin 40°) and 8 (cos 95° + i sin 95°) are therefore multiplied by each other to provide -202 + 20i2.

learn more about magnitudes here :

https://brainly.com/question/31022175

#SPJ11

The graph of the function y = 2x + 5 is added as an attachment

From the question, we have the following parameters that can be used in our computation:

y = 2x + 5

The above function is a linear function that has been transformed as follows

Next, we plot the graph using a graphing tool by taking not of the above transformations rules

The graph of the function is added as an attachment

Read more about functions at

brainly.com/question/2456547

#SPJ1

Question

Graph the equation y=2x+5 . select integers for x from −3 to 3, inclusive.

The equation for the tangent plane and the normal line at the point P0 (1, 2, 3) on the surface 3x² +y²+z² = 20 are given by 6x + 4y + 6z – 34 = 0 and (x – 1)/6 = (y – 2)/4 = (z – 3)/6, respectively.

The given equation is 3x² + y² + z² = 20. We need to find the equation of tangent plane and normal line at the point P0 (1, 2, 3).Steps to find the equation for the tangent plane and normal line at the point P0(1,2,3) on the surface 3x² +y²+z²=20We are given the surface equation,3x² + y² + z² = 20.

Therefore, ∂f/∂x = 6x, ∂f/∂y = 2y, ∂f/∂z = 2z.We can now find the equation of tangent plane and normal line at the point P0 (1, 2, 3).We can find the gradient of the surface equation as follows:grad f = (6x, 2y, 2z)At the point P0 (1, 2, 3), grad f = (6, 4, 6).This gradient is normal to the tangent plane at point P0 (1, 2, 3).

So, the equation of tangent plane at point P0 (1, 2, 3) is given by:6(x – 1) + 4(y – 2) + 6(z – 3) = 0Simplifying, we get,6x + 4y + 6z – 34 = 0So, the equation of tangent plane at point P0 (1, 2, 3) is 6x + 4y + 6z – 34 = 0.To find the equation of normal line at point P0 (1, 2, 3), we know that it will pass through this point and is perpendicular to the tangent plane.Therefore, the equation of the normal line at point P0 (1, 2, 3) is: (x – 1)/6 = (y – 2)/4 = (z – 3)/6. This is the required equation for the normal line at point P0 (1, 2, 3).

To know more about tangent plane visit :

https://brainly.com/question/30565764

#SPJ11

To find the depth of water in the tank at t = 3 minutes, we need to calculate the volume of water that has been pumped into the tank by that time.

The rate at which water is pumped into the tank is given by r(t) = 100 - 6t ft^3/min.

To find the volume of water pumped into the tank from t = 0 to t = 3, we integrate the rate function over the interval [0, 3]:

V = ∫[0, 3] (100 - 6t) dt

V = [100t - 3t^2/2] evaluated from 0 to 3

V = (100(3) - 3(3)^2/2) - (100(0) - 3(0)^2/2)

V = (300 - 27/2) - 0

V = 300 - 13.5

V = 286.5 ft^3

The volume of water pumped into the tank after 3 minutes is 286.5 ft^3.

To find the depth of water in the tank, we need to divide this volume by the cross-sectional area of the tank.

The tank has a radius of 6 feet, so its cross-sectional area is given by:

A = πr^2

A = π(6)^2

A = 36π ft^2

Now, we can find the depth of water:

depth = V / A

depth = 286.5 / (36π)

depth ≈ 2.53 ft

Therefore, the depth of water in the tank at t = 3 minutes is approximately 2.53 feet.

To know more about sectional visit-

brainly.com/question/31398176

#SPJ11

The probability that a fruit will weigh between 287 g and 450 g is 0.9203 or approximately 0.92 (rounded to two decimal places). Hence, the probability is 0.92.

(μ) = 402 gStandard deviation (σ) = 34 gLet X be the weight of the fruit.Then X ~ N(402, 34^2)To find the probability that a fruit will weigh between 287 g and 450 g, we need to find the z-scores for these weights as follows:z1 = (287 - 402) / 34 = -3.38z2 = (450 - 402) / 34 = 1.41Now we need to find the probability between these z-scores using the standard normal distribution table.P(z1 < Z < z2) = P(-3.38 < Z < 1.41)We get these values from the standard normal distribution table: P(Z < -3.38) = 0.0004 and P(Z < 1.41) = 0.9207.Substituting these values:P(-3.38 < Z < 1.41) = P(Z < 1.41) - P(Z < -3.38)= 0.9207 - 0.0004 = 0.9203Therefore, the probability that a fruit will weigh between 287 g and 450 g is 0.9203 or approximately 0.92 (rounded to two decimal places). Hence, the probability is 0.92.

Learn more about  probability here:

https://brainly.com/question/31828911

#SPJ11

Since this ratio does not approach to a number less than 1 as n approaches to infinity, it diverges. So, we can conclude that the given series diverges.

The given series is as follows:

[infinity] n 5n3 2 n = 1

Now, to find out whether the given series converges or diverges we will use the ratio test which states that if the absolute value of the ratio of the (n+1) th term to nth term of the series is less than 1, then the series converges, otherwise it diverges.

So, let's apply the ratio test to the given series to determine its convergence or divergence.

The ratio of the (n+1) th term to nth term of the given series is given as follows:

|a(n+1)/a(n)|= |5(n+1)^3/(2(n+1)) ÷ 5n^3/(2n)|

= |5(n+1)^3/5n^3| × |2n/(2(n+1))|

= [(n+1)/n]^3 × [1/(1+1/n)]=>|a(n+1)/a(n)|

= [(n+1)/n]^3 × [1/(1+1/n)]

To know more about infinity visit:

https://brainly.com/question/22443880

#SPJ11

The statement "the intercept is the change in y for a change in x of one unit" is False.

The statement "the intercept is the change in y for a change in x of one unit" is false.

The intercept refers to the point where a straight line crosses the y-axis on a graph.

It is the point at which the value of x equals zero.

The y-intercept, also known as the vertical intercept, is the point where the value of x is zero.

In other words, the y-intercept is the point where the line intersects the y-axis, and its x-coordinate is zero.

It's important to note that the y-intercept is a single point on a graph, and it does not represent a change in y or x.

Therefore, the intercept is not the change in y for a change in x of one unit.

To summarize, the statement "the intercept is the change in y for a change in x of one unit" is False.

Know more about intercept here:

https://brainly.com/question/25722412

#SPJ11

The given integral by changing to polar coordinates becomes 4sinθ.

Now, if we're going to be converting an integral in Cartesian coordinates into an integral in polar coordinates we are going to have to make sure that we have also converted all the

x and y into polar coordinates as well. To do this we will need to remember the following conversion formulas,

x=rcosθ, y=rsinθ

x²+y²=r²

We are now ready to write down a formula for the double integral in terms of polar coordinates.

∫∫Df(x, y)dA= [tex]\int\limits^\beta_\alpha {} \, \int\limits^{h1(\theta)}_{h2(\theta)} {f(cos\theta, rsin\theta)} \, rdxrd\theta[/tex]

Consider the integral

∫∫R(2x-y)dAR : x²+y²=4, x=0, y=x

We have the polar coordinate as follows

x=rcosθ, y=rsinθ

⇒x²+y²=r² x=0

⇒cosθ=0

⇒θ = π/2 y=x

⇒cosθ=sinθ

⇒tanθ=1

⇒θ=π/4

We can use this to get the limits of integration for r and θ as follows

0≤r<2

π/4≤θ≤π/2

Therefore, the integral become as follows

∫∫R(2x-y)dA = [tex]\int\limits^{\frac{\pi }{4} }_ {{\frac{\pi }{2} }} \,\int\limits^2_0 {2rcos\theta-rsin\theta} \, drd\theta[/tex]

= [tex]\int\limits^{\frac{\pi }{4} }_ {{\frac{\pi }{2} }} \,[-\frac{1}{2} r^2sin\theta+r^2cos\theta]^2_0[/tex]

= [tex]\int\limits^{\frac{\pi }{4} }_ {{\frac{\pi }{2} }} \,[4cos(\theta)-2sin(\theta))d\theta=[4sin(\theta)[/tex]

Therefore, the given integral by changing to polar coordinates becomes 4sinθ.

Learn more about the polar coordinates here:

https://brainly.com/question/31904915.

#SPJ4

"Your question is incomplete, probably the complete question/missing part is:"

Find ∫∫R(2x-y)dA, where R is the region in the first quadrant enclosed by the circle x²+y²=4, and the lines x=0 and y=x. Solve the double integral in polar form (drdθ) showing work and provide a graphical illustration.

The results suggest that the effectiveness of seat belts in reducing fatalities is statistically significant and it is concluded that seat belts are effective in reducing fatalities.

Given data A simple random sample of front-seat occupants involved in car crashes is obtained. Among 2756 occupants not wearing seat belts, 27 were killed. Among 7612 occupants wearing seat belts. 17 were killed.Null and alternative hypothesisThe null hypothesis is H0:

The fatality rates are equal for both occupants with seat belts and occupants without seat belts.The alternative hypothesis is H1: The fatality rates are not equal for both occupants with seat belts and occupants without seat belts.

Test statisticThe test statistic used for hypothesis testing is the z-test. The formula for the z-test statistic is given as;

z=[tex](p1-p2)\sqrt(p(1-p)*(1/n1 + 1/n2))[/tex]

Where p1 and p2 are the sample proportions, p is the pooled proportion, n1 and n2 are the sample sizes of occupants with and without seat belts respectively.

z=[tex](17/7612 - 27/2756)\sqrt(((17+27)/(7612+2756))*(1-((17+27)/(7612+2756)))*(1/7612 + 1/2756))[/tex]

= -4.02

Since the sample size is greater than 30, the z-distribution can be used.

The p-value for a 2-tailed test is given as P(z>4.02) + P(z<-4.02) = 0.00006

ConclusionThe P-value is less than the significance level of a=0.05, so the fatality rate is higher for those not wearing seat belts. Hence the null hypothesis is rejected and it is concluded that seat belts are effective in reducing fatalities.Confidence IntervalThe confidence interval can be calculated as;

[tex](p1-p2) \pm zα/2 * \sqrt(p1(1-p1)/n1 + p2(1-p2)/n2)[/tex] = (0.007, 0.023)

ConclusionThe confidence interval limits do not include zero, hence it appears that the fatality rate is different for occupants wearing seat belts and those who do not wear seat belts.

To know more about random sample  visit:

https://brainly.com/question/12823688

#SPJ11

The training technique helps to improve the athletes' times for the 800 meters. Therefore, we can conclude that the training has a positive impact on the athletes' performance.

a. The p-value for the given test is approximately 0.0164.

To determine the p-value, we need to conduct a paired t-test since the samples are dependent (before and after training for the same athletes). The null hypothesis (H0) assumes no improvement in the athletes' times, while the alternative hypothesis (Ha) assumes improvement.

By performing the paired t-test, we calculate the t-statistic and its corresponding p-value. Given the data, the calculated t-statistic is -4.2798. Using the t-distribution table or statistical software, we find that the p-value associated with this t-statistic is approximately 0.0164 (rounded to four decimal places).

b. There is sufficient evidence to conclude that the training helps to improve the athletes' times for the 800 meters.

Since the p-value (0.0164) is less than the significance level of 0.05, we reject the null hypothesis. This means that there is sufficient evidence to suggest that the training technique helps to improve the athletes' times for the 800 meters. Therefore, we can conclude that the training has a positive impact on the athletes' performance.

Learn more about athletes here

https://brainly.com/question/28699163

#SPJ11

r is near +1, there is areas of strength for a connection between's the quantity of minutes worked out and the pulse. Consequently, r = 0.8836 is the correlation coefficient. This suggests that as the number of minutes worked out increases, so does the heart rate

The data given in the request is about the connection between the amount of minutes worked out in a treadmill machine and the beat (beats every second) for 10 unmistakable people. A straightforward linear regression model can be used to predict the heart rate as the dependent variable, and least squares can be used to fit the worked-out number of minutes as the independent variable.

The amount of squared contrasts between the anticipated and real upsides of the reliant variable are limited utilizing this methodology. y = mx + c is the condition for the line, where y is the reliant variable (pulse), x is the free factor (number of worked-out minutes), m is the incline of the line (relapse coefficient), and y is the y-block. The values of m and c can be found using the following formulas: With the given data, the following calculations are made: m = (nxy - xy)/(nx2 - (x)2) c = (y - mx)/n, where n is the quantity of perceptions, xy is the amount of results of x and y, x and y are the amount of x and y, separately, and x2 is the amount of squares of x.

The line's condition is y = 4.7663x + 53.2999b.) The relationship between the number of minutes worked out and the heart rate can be determined using the correlation coefficient (r). The formula for r is: r = (nxy - xy)/sqrt[(nx2 - (x)2)(ny2 - (y)2)] The accompanying computations are made with the given information: Since r is near +1, there is areas of strength for a connection between's the quantity of minutes worked out and the pulse. Consequently, r = 0.8836 is the correlation coefficient. This suggests that as the number of minutes worked out increases, so does the heart rate.

To know more about correlation coefficient refer to

https://brainly.com/question/29704223

#SPJ11

G - v has k connected components.

Given that G is a connected graph and every vertex has even degree, gr(v) = 2k and v is the only cut-vertex of G, then we need to show that G - v has k connected components.

In order to show that G - v has k connected components, we will make use of the following theorem.

Theorem: Let G be a graph. Then G has a cut-vertex if and only if there exists u ∈ V(G) such that at least two components of G - u are not connected by a path containing u.Proof: If G has a cut-vertex v, then v divides G into two components G1 and G2.

Let u be any vertex in G1. Then G - u is disconnected, since there is no path connecting G1 and G2 which does not pass through v.On the other hand, if there exists u ∈ V(G) such that at least two components of G - u are not connected by a path containing u, then G has a cut-vertex.

To see this, let G1 and G2 be two components of G - u that are not connected by a path containing u.

Then v = u is a cut-vertex of G, since v separates G into G1 and G2, and every path between G1 and G2 must contain v.Now, let us apply this theorem to the given graph G.

Since v is the only cut vertex of G, every vertex in G - v must belong to the same component of G - v.

If there were more than one component of G - v, then v would not be the only cut-vertex of G.

Therefore, G - v has only one component.

Since every vertex in G has even degree, we can apply the handshaking lemma to conclude that the number of vertices in G is even.

Therefore, the number of vertices in G - v is odd. Let k be the number of vertices in G - v.

Then k is odd and every vertex in G - v has even degree.

Therefore, G - v is a connected graph with k vertices, and every vertex has an even degree. By the same argument, every connected graph with k vertices and every vertex having an even degree is isomorphic to G - v.

Therefore, G - v has k connected components.

Know more about vertex here:

https://brainly.com/question/31526803

#SPJ11

SSE = s²e = 84 Hence, the SSE in the ANOVA table is 84.

Given that the following ANOVA table has the values below:d.f.

Sum of squares Treatments 5 Error 84 Mean squares 10 F-statistic 3.24

We are to find the SSE in the ANOVA table.

SSE (sum of squared error) is the measure of the variation in the sample that is not explained by the regression model.

SSE is an estimate of the variance that is still present when the regression model has been applied to the data.

Let SSE = s²e,

Then,s²e = MSE x dfe,

where MSE is the mean squared error, and dfe is the degrees of freedom for error.Solving for SSE;s²e = MSE x dfe84 = 10 x 8.4

Therefore, SSE = s²e = 84 Hence, the SSE in the ANOVA table is 84.

Know more about ANOVA here:

https://brainly.com/question/15084465

#SPJ11

The acceptable limits of the control is 13.7-14.3.Hemoglobin (Hb) is a red, iron-rich protein that allows red blood cells to transport oxygen throughout the body. Hemoglobin is responsible for the characteristic red color of blood and is responsible for the exchange of oxygen and carbon dioxide in the lungs.

The standard deviation (SD) is a statistical measure of the dispersion of a set of data values relative to its mean. A low standard deviation indicates that the data points are near to the mean, whereas a high standard deviation indicates that the data points are far from the mean. The standard deviation is expressed in the same units as the data points themselves. In the given problem, the mean for the normal hemoglobin control is 14.0 mg/dL and the standard deviation is 0.15. Since the acceptable control range is +/-2 standard deviations (SD), we can calculate the acceptable limits of control using the given formula below: Lower limit = Mean - 2(SD)Upper limit = Mean + 2(SD)Substitute the given values in the formula. Lower limit = 14 - 2(0.15)Upper limit = 14 + 2(0.15)Lower limit = 13.7Upper limit = 14.3Therefore, the acceptable limits of control are 13.7-14.3.Answer: 13.7-14.3

To know more about Hemoglobin, visit:

https://brainly.com/question/31239540

#SPJ11

Car owners' accident probability variance of X is 0.96.

This problem can be solved using the binomial distribution. Let's go through each question step by step:

(1) The number of possible values that X can take depends on the number of car owners you randomly selected. In this case, you selected 6 car owners, so X can take any value from 0 to 6. Therefore, X can take 7 possible values: 0, 1, 2, 3, 4, 5, or 6.

(2) The probability of 5 out of 6 car owners answering "No" can be calculated using the binomial probability formula. In this case, we want to find the probability of 5 successes (No answers) out of 6 trials (car owners selected), given that the probability of success (a car owner having no accident) is 0.8.

The probability can be calculated as follows:

P(X = 5) = (6 choose 5) * (0.8^5) * (0.2^1)

= 6 * 0.32768 * 0.2

= 0.393216

Rounding the answer to three decimal places, the probability that 5 out of 6 car owners answered "No" is approximately 0.393.

(3) The expected value of X can be calculated using the formula:

E(X) = n * p

where n is the number of trials and p is the probability of success.

In this case, n = 6 (number of car owners selected) and p = 0.8 (probability of a car owner having no accident).

E(X) = 6 * 0.8 = 4.8

Therefore, the expected value of X is 4.8.

(4) The variance of X can be calculated using the formula:

Var(X) = n * p * (1 - p)

In this case, n = 6 (number of car owners selected) and p = 0.8 (probability of a car owner having no accident).

Var(X) = 6 * 0.8 * (1 - 0.8)

= 6 * 0.8 * 0.2

= 0.96

Therefore, Car owners' accident probability variance of X is 0.96.

For such more questions on Car owners' accident probability.

https://brainly.com/question/16908168

#SPJ8

Statement (a) is false and Statement (b) is true.

The given random variables V and W follow two different uniform distributions: V ~ U(-1, 0) and W ~ U(-1, 1), and they are independent.

The probability density function of a uniform distribution is given by f(x) = 1 / (b-a) for a ≤ x ≤ b.

The mean of V and W is (a+b)/2, and their variance is (b-a)^2 / 12.

To compute the mean and variance of V^2 and W^2, we find that the mean of V^2 is (b^2 + a^2)/2, and the mean of W^2 is (b^2 + a^2)/2. The variance of V^2 is (b-a)^2 / 12 + ((b+a)/2)^2, and the variance of W^2 is (b-a)^2 / 12 + ((b+a)/2)^2. Thus, V^2 and W^2 have the same distribution as their respective random variables V and W.

When a distribution is symmetrical, the mean, mode, and median are the same. This holds true for various symmetric distributions, such as the normal distribution. Therefore, the statement is true.

To know more about symmetric distributions refer here:

https://brainly.com/question/31184447#

https://brainly.com/question/28285791#

#SPJ11

The vertex of the quadratic function [tex]g(x) = –3x^2 + 18x + 2[/tex]is (c) (3, 29).

To find the vertex of a quadratic function in the form of [tex]g(x) = ax^2 + bx + c,[/tex]  you can use the formula x = -b / (2a) to find the x-coordinate of the vertex.

Once you have the x-coordinate, you can substitute it back into the equation to find the corresponding y-coordinate.

For the function [tex]g(x) = -3x^2 + 18x + 2,[/tex] we have a = -3, b = 18, and c = 2. Using the formula, we can calculate the x-coordinate of the vertex:

x = -b / (2a)

  = -18 / (2*(-3))

  = -18 / (-6)

  = 3

Now, substituting x = 3 back into the equation to find the y-coordinate:

[tex]g(3) = -3(3)^2 + 18(3) + 2[/tex]

    = -27 + 54 + 2

    = 29

Therefore, the vertex of the function [tex]g(x) = -3x^2 + 18x + 2 is (3, 29).[/tex]

The correct answer is c. (3, 29).

Learn more about quadratic functions and vertex

brainly.com/question/29076802

#SPJ11

The regression equation obtained is ŷ = 17.6 + 3.8x₁ + 2.3x₂ + 7.6x₃ + 2.7x₄.In this problem, SST (Total Sum of Squares) is known which is 1805 and SE (Standard Error) is not known and hence we cannot find the value of R² or R (Correlation Coefficient)

Given that the regression equation obtained is ŷ = 17.6 + 3.8x₁ + 2.3x₂ + 7.6x₃ + 2.7x₄.In the above equation, ŷ is the dependent variable and x₁, x₂, x₃, x₄ are the independent variables. The given regression equation is in the standard form which is y = β₀ + β₁x₁ + β₂x₂ + β₃x₃ + β₄x₄.

The equation is then solved to get the values of the coefficients β₀, β₁, β₂, β₃, and β₄.In this problem, SST (Total Sum of Squares) is known which is 1805 and SE (Standard Error) is not known and hence we cannot find the value of R² or R (Correlation Coefficient).The regression equation is used to find the predicted value of the dependent variable y (ŷ) for any given value of the independent variable x₁, x₂, x₃, and x₄.

The regression equation is a mathematical representation of the relationship between the dependent variable and the independent variable. The regression analysis helps to find the best fit line or curve that represents the data in the best possible way.

he regression equation obTtained is ŷ = 17.6 + 3.8x₁ + 2.3x₂ + 7.6x₃ + 2.7x₄. SST (Total Sum of Squares) is known which is 1805 and SE (Standard Error) is not known. The regression equation is used to find the predicted value of the dependent variable y (ŷ) for any given value of the independent variable x₁, x₂, x₃, and x₄. The regression analysis helps to find the best fit line or curve that represents the data in the best possible way.

To know more about regression equation visit:

brainly.com/question/32162274

#SPJ11

This problem can be solved with integration. The first step is to integrate f '(t) dt. We use the integration formula for this purpose.The function f(t) has been found using the differential equation f'(t) = sec(t)(sec(t) tan(t))

f '(t) = sec(t)(sec(t) tan(t))

Integral calculus is used to find f(t) since it deals with derivatives.

Let's solve it.

f '(t) = sec(t)(sec(t) tan(t)) f(t) = ∫f '(t) dt

Using the integration formula,

f(t) = ∫ sec^2(t)dt = tan(t) + C [where C is the constant of integration]

f(t) = tan(t) + C

Now we have f(4) = -7. To find the value of C, we'll use

f(4) = -7=tan(4) + C7 = 1.1578 + C C = -7 - 1.1578 = -8.1578

Thus, the function

f(t) = tan(t) - 8.1578.

Therefore,The function f(t) has been found using the differential equation f'(t) = sec(t)(sec(t) tan(t))

In conclusion,f '(t) = sec(t)(sec(t) tan(t)) has been solved using integration. The value of the constant of integration, C, was found using the value of f(4) = -7. The function f(t) = tan(t) - 8.1578 is the solution to the differential equation.

To know more about differential equation visit:

brainly.com/question/32538700

#SPJ11

The main answer is that the difference between the number of strikes thrown before and after the training program for the Little League pitchers is as follows: -7, -7, 2, 4, 3, 2, 0, 2, 3, 3, 0, 2, -2, -4, -1, -1, 1, -3, -2, -1.

The table provides the number of strikes each player threw before and after the training program. To calculate the difference between the number of strikes thrown before and after, we subtract the "After" value from the "Before" value for each player.

For example, for the first player, the difference is 35 (After) - 28 (Before) = -7. Similarly, for the second player, the difference is 36 - 29 = -7. We repeat this calculation for each player and obtain the following differences: -7, -7, 2, 4, 3, 2, 0, 2, 3, 3, 0, 2, -2, -4, -1, -1, 1, -3, -2, -1.

These differences represent the change in the number of strikes thrown by each player after undergoing the training program. A negative difference indicates a decrease in the number of strikes, while a positive difference indicates an improvement. The range of differences is from -7 to 4, showing that the impact of the training program varied among the players.

It's important to note that the claim made in the advertisements suggested that players would be able to throw strikes on at least 60% of their pitches after the training. However, the difference values alone do not provide information about the success rate in terms of percentage. To determine if the training program was effective in meeting this claim, further analysis is needed, such as calculating the strike percentage for each player before and after the training and comparing them to the expected 60% threshold.

Learn more about difference:

brainly.com/question/30241588

#SPJ11

The ANOVA method is very useful when conducting research involving multiple groups or populations, as it allows researchers to test for significant differences in the means of multiple populations in a single test.

Analysis of variance is an extremely popular approach for examining the significance of population variations. It's used to estimate the population variance of two or more groups by comparing the variance between the groups to the variance within them.

ANOVA (analysis of variance) is a statistical method for determining whether or not there is a significant difference between the means of two or more groups. The total sample size in the experiment is nT, and there are k populations. The mean square due to error is SSE/(k-1), while the mean square due to treatment is SSTR/k.

The F-statistic, which is used to test the null hypothesis that there is no difference between the means of the populations, is calculated by dividing the mean square due to treatment by the mean square due to error. If the F-statistic is high, it suggests that there is a significant difference between the means of the populations, and the null hypothesis should be rejected.

To know more about populations visit :

https://brainly.com/question/32485211

#SPJ11

The probability that a call lasts less than 4 minutes is 0.1474.

Given, Mean = μ = 6.3 minutes

Standard deviation = σ = 2.2 minutes

Using z-score formula, z = (X - μ) / σ(a) To find P(5 < X < 10), we have to calculate z1 and z2 respectively, z1 = (5 - 6.3) / 2.2 = -0.59z2 = (10 - 6.3) / 2.2 = 1.68

Now, we can find the probability, P(5 < X < 10) = P(-0.59 < z < 1.68)P(-0.59 < z < 1.68) = Φ(1.68) - Φ(-0.59)  ≈ 0.833 - 0.2778 = 0.5552

Therefore, the probability that a call lasts between 5 and 10 minutes is 0.5552.

(b) To find P(X > 7), we have to calculate the z-score first,z = (X - μ) / σz = (7 - 6.3) / 2.2 = 0.32

Now, we can find the probability, P(X > 7) = P(z > 0.32) = 1 - Φ(0.32)≈ 1 - 0.6255 = 0.3745

Therefore, the probability that a call lasts more than 7 minutes is 0.3745.

(c) To find P(X < 4), we have to calculate the z-score first,z = (X - μ) / σz = (4 - 6.3) / 2.2 = -1.05Now, we can find the probability, P(X < 4) = P(z < -1.05) = Φ(-1.05)≈ 0.1474

Therefore, the probability that a call lasts less than 4 minutes is 0.1474.

Know more about probability here:

https://brainly.com/question/25839839

#SPJ11

The polar coordinates corresponding to the rectangular coordinates (5, 573) are approximately (573.05, 90°).

Explanation:

Given rectangular coordinates of the point are (5, 573) and we need to find the polar coordinates.

Let us first recall the definition of rectangular and polar coordinates.

Definitions:

Rectangular coordinates: A rectangular coordinate system is a two-dimensional coordinate system that locates points on the plane by reference to two perpendicular axes. The coordinates of a point P are written as (x, y), where x is the horizontal distance from the origin to P, and y is the vertical distance from the origin to P.

Polar coordinates: A polar coordinate system is a two-dimensional coordinate system that locates points on the plane by reference to a distance from a fixed point and an angle from a fixed axis. Polar coordinates are written as (r, θ), where r is the distance from the origin to P, and θ is the angle formed by the positive x-axis and the line segment from the origin to P.

Now we can find the polar coordinates of the point (5, 573) as follows:

Let's first find r using the formula

r = √(x² + y²)

r = √(5² + 573²)

r = √(25 + 328329)

r = √328354 ≈ 573.05

Now, we will find θ using the formula

θ = tan⁻¹(y / x)

θ = tan⁻¹(573 / 5)

θ = 89.9595° ≈ 90°

Therefore, the polar coordinates of the point (5, 573) are approximately (573.05, 90°).

To know more about Rectangular coordinates, visit:

https://brainly.com/question/31904915

#SPJ11