Answer:
24.984466667
Explanation:
add all mass values and divide by amount (3)
Will three different liquids lose heat at the same rate?
Yes, because of the liquid's specific heat capacity or heat capacity, different liquids heat up at varying speeds.
What does the same quantity of heat gain or lose at the same temperature?Which amount of heat is needed to raise the liquid's temperature by one degree Celsius? When analyzing a mass of 1 kg, the term "heat capacity" or "specific heat capacity" refers to the amount of heat needed to raise the temperature of 1 kilogram of liquid or fluid by 1°C.
What aspects of a liquid's rate of heat loss are there?area of the body's surface. nature of the body's surface. the body's surface's composition (material effects conductivity through walls of the body).
To know more about specific heat capacity visit:-
https://brainly.com/question/28302909
#SPJ1
how did the scientist explain the relationship beetween the colors observed and the structure of the atom
Answer:
The colors observed is a sign that definite energy transformations occurs inside the atom gives off light. It follows that electrons must occupy orbits of fixed energy.
Hope that helps!
At a crime scene, Lorenzo finds a gun in shallow pond water. How should he transport the gun to BEST preserve the evidence?
A.
He should drain the water and then put the gun in a plastic bag.
B.
He should rinse the gun, dry it, and then put it in a paper bag.
C.
He should clean the gun and collect a separate water sample.
D.
He should keep the gun submerged in water as he transports it.
Answer:d
Explanation:
I really need help!
I promise I've been paying attention, it just goes in one ear and out the other ;-;
(question is in picture!)
Answer: the balanced equation is the same.
Explanation:
Every element must have the same number of atoms on each side of the equation (law of conservation of mass).
2. Balancing the equation can be done only by adjusting the coefficients.
C
is a balanced element because there is the same number of atoms of
C
in each side of the equation.
C
is a balanced element
H
is a balanced element because there is the same number of atoms of
H
in each side of the equation.
H
is a balanced element
O
is a balanced element because there is the same number of atoms of
O
in each side of the equation. O is a balanced element. Na is a balanced element because there is the same number of atoms of Na on each side of the equation. Na is a balanced element H is a balanced element because there is the same number of atoms of H on each side of the equation. H is a balanced element C is a balanced element because there is the same number of atoms on each side of the equation. C is a balanced element. O
is a balanced element because there is the same number of atoms of
O in each side of the equation. O is a balanced element. All elements have the same number of atoms on each side of the equation, which means that the law of conservation of mass is satisfied and thus the chemical equation is balanced.
This is the name of the variable in a scientific experiment that is controlled by the scientist
O Negative control
O Independent Variable
O Dependent Variable
O Positive control
Answer:
b.Independent variable
Explanation:
The independent variable is the one that is changed by the scientist. To insure a fair test, a good experiment has only one independent variable. As the scientist changes the independent variable, he or she records the data that they collect.
.
10. In which of the following situations is a biotechnologist most likely to decide to use directed evolution as an enzyme engineering technique as opposed to rational design?
A) When a structure of the
enzyme is available to aid engineering
B) When the enzyme can only be
screened in a low throughput manner
C) When the enzyme mechanism
is understood and provides insight to engineering
D) When current data allows
molecular modelling techniques to be used predictively
E)When none of the above are true
A Biotechnologist decides to use directed evolution as an enzyme engineering technique when the enzyme mechanisms is understood and provides insight to engineering Why is directed evolution important?
A potent method for enhancing the functionality of proteins is directed evolution. When the biological function is unclear or there is little chemical understanding of the substrate and protein structure, directed evolution generates hundreds of variants in order to find the optimal solution.
What is enzyme engineering technique?
In order to increase the usefulness and activity of existing enzymes, enzyme engineering approaches use recombinant DNA technology to develop new proteins and enzymes with designer functions.
What is rational design?
In synthetic science and biomolecular designing, sane plan (RD) is an umbrella term which welcomes the system of making new particles with a specific usefulness, in light of the capacity to foresee how the atom's construction (explicitly got from themes) will influence its conduct through actual models.
Hence, Biotechnologist most likely to decide to use directed evolution as an enzyme engineering technique as opposed to rational design when the enzyme mechanism is understood and provides insight to engineering .
To learn more about direct evolution from the given link:
https://brainly.com/question/12271572
#SPJ1
A known reaction has Change in U= 38 kJ/mol. The reaction is done at constant pressure and you measure the amount
of work done to be w=+2 kJ/mol. What is q in kJ/mol?
q = 36kJ/ mol amount of heat is produced according to 1st law of Thermodynamics
What is 1st law of Thermodynamics ?
The first law of thermodynamics states that energy is neither created nor destroyed, only its form can be changed. In any system, energy transfer involves exceeding control limits by mass, external work, or heat transfer beyond limits. These cause changes in the stored energy within the control volume.
The first law of thermodynamics states that heat is a form of energy and therefore thermodynamic processes obey the law of conservation of energy. This means that it cannot generate or destroy thermal energy.
ΔU = q + w
38kJ/ mol = q + 2kJ/mol = 36kJ/mol
q = 36kJ/ mol amount of heat is produced according to 1st law of Thermodynamics
To know about 1st law of Thermodynamics from the link
https://brainly.com/question/26035962
#SPJ13
The diagram shows an exchange
surface in the human body. Name the
parts labelled 2.
Enter your answer
Answer: villi/villus
Explanation: The parts labeled 2 are villi, many of which are found in the small intestine.
villi/villus exchange surface in the human body which are found in the small intestine.
what are the function of villi ?They are small finger-like folding in the small intestine, A network of capillaries and a big lymph vessel called the lacteal supply the villi.
These are found in the small intestine's inner walls, Villi are specialized for absorption in the small intestine as they have a thin wall, one cell thick, which enables a shorter diffusion path.
They have a large surface area so there will be more efficient absorption of fatty acids and glycerol into the blood stream. They have a rich blood supply to keep a concentration gradient.
For more details villi, visit
https://brainly.com/question/11375300
#SPJ2
15. A 100 g sample of each of the following metals is heated from 35°C to 45°C. Which metal absorbs
the greatest amount of heat energy?
Metal
4
magnesium
e. copper
copper
magnesium
mercury
silver
lead
b. lead
c. silver
Specific Heat Capacity
0.385 J/(g-°C)
1.02 J/(g-°C)
0.138 J/g °C)
0.237 J/(g-°C)
0.129 J/(g-°C)
d. mercury
The metal that absorbs the greatest amount of heat energy is lead.
Heat energy is the result of the movement of tiny particles called atoms, molecules liquids and gases. Heat energy can be transferred from one object to another. The transfer or flow due to the difference in temperature between the two objects is called heat.
The equation that relates the specific heat capacity to the heat absorbed by the metal is given by:
q= m[tex]C_{p}[/tex]ΔT where q = heat absorbed by the the metal, m = mass of the metal, [tex]C_{p}[/tex] = heat capacity of the metal and ΔT is the change in temperature
In the above given question, the mass of the metal and change in the temperature is the same for all the metals. Therefore, we can determine the metal that will absorb the lowest amount of energy by using the specific heat capacity.
From the equation the heat absorbed by the metal (q) is directly proportional to the specific heat ([tex]C_{p}[/tex]). Hence we can see that lead has the highest specific heat capacity and therefor Lead absorbs the maximum amount of heat.
To know more about heat energy
https://brainly.com/question/25384702
#SPJ1
the number of electron dense areas of SeCl6
Using the Valence shell electron pair repulsion theory, there are six electron dense areas in the compound.
What is the valence shell electron pair repulsion theory?According to the valence shell electron pair repulsion theory, the number of electron pairs that surround the valence shell of the central atom of the molecule is the determinant factor of the shape of the molecule.
Thus, the repulsion between the electron pairs would make the compound to assume a certain shape as the electrons would be able to maximize the repulsion that does exists between them.
In this case, we have a compound that have a central tom that is surround be six electron pairs that surround the central atom and they are all bond pairs of electron thus we would have six areas of electron density.
Learn more about electron density:https://brainly.com/question/15120499
#SPJ1
There are 0.05216 mol ZnSO4 and 0.3609 mol H2O in the sample. Step 3: Divide each by the smallest number of moles to get the ratio. What is the ratio of ZnSO4:H2O? [?] mol ZnSO4: [?] mol H2O
If there are 0.05216 mol of [tex]ZnSO_4[/tex] and 0.3609 mol of [tex]H_2O[/tex] in a hydrated salt sample. the ratio of [tex]ZnSO_4[/tex] and [tex]H_2O[/tex] would be 1:7.
Empirical formulaThe problem here can be solved using the empirical formula method. There are 0.05216 mol of [tex]ZnSO_4[/tex] and 0.3609 mol of [tex]H_2O[/tex]. In order to find the mole ratio of the 2 constituents, let's divide by the smallest mol:
The smallest mol here is the mol of [tex]ZnSO_4[/tex] which is 0.05216.
[tex]ZnSO_4[/tex] = 0.05216/0.05216
= 1
[tex]H_2O[/tex] = 0.3609/0.05216
= 7
Thus, the mole ratio of the two constituents is 7 and 1. The formula for the hydrated compound would be [tex]ZnSO_4[/tex].7[tex]H_2O[/tex].
In other words, 1 mol [tex]ZnSO_4[/tex]: 7 mol [tex]H_2O[/tex].
More on empirical formulas can be found here: https://brainly.com/question/14044066
#SPJ1
Chlorine gas is bubbled through acalcium bromide solution. The solution turns brown, the color of bromine.
What type of reaction is this?
Chlorine gas is bubbled through a calcium bromide solution is a single displacement reaction.
Chlorine (in the form of a gas or dissolved in water) replaces bromine when added to calcium bromide solution. Chlorine replaces bromine in calcium bromide because it is more reactive than bromine. The solution darkens. The displaced bromine is responsible for this brown color. calcium chloride is the product of the chlorine.
A single replacement reaction, also known as a single displacement reaction, occurs when one element in a molecule is swapped out for another. Starting ingredients are always pure elements combined with an aqueous compound, such as pure hydrogen gas or zinc metal. A new aqueous compound and a different pure element will be produced as products when a replacement reaction takes place.
For more information on displacement reaction kindly visit to
https://brainly.com/question/3172917
how without making any quantitative measurements could you determine if a piece of plastic has a density greater or less than 1 g/cm
To determine if the piece of plastic has a density greater or less than 1 g/cm³, the piece of plastic is placed in water, if it sinks, it has a greater density, but if it floats, it has a lesser density.
What is an appropriate method to determine if a piece of plastic has a density greater or less than 1 g/cm³?The density of a substance measure how compact the substance is.
For fluids such as water, objects that are denser than water will sink in water. However, if the density is less than that of water, it will float in water.
The density of water is 1 g/cm³.
Hence, objects that have densities greater than 1 g/cm³ will sink in water, whereas objects that have densities less than 1 g/cm³ will float in water.
Learn more about density at: https://brainly.com/question/6838128
#SPJ1
How much water will be needed to make a solution of 5.0 M MgO with 200.0 g MgO?
Volume of water will be needed to make a solution of 5.0 M MgO with 200 g MgO is 25 L.
given that :
molarity of MgO = 5 M
mass of MgO = 200 g
molar mass of MgO = 40 g/mol
number of moles = mass / molar mass
number of moles of MgO = 200 g / 40 g/mol
= 5 mol
molarity of solution is given as :
molarity = moles of solute / volumes in L
volume = moles / molarity
volume = 5 × 5
= 25 L
Thus, Volume of water will be needed to make a solution of 5.0 M MgO with 200 g MgO is 25 L.
To learn more about molarity here
https://brainly.com/question/8732513
#SPJ1
Each element is composed of a unique kind of atom.
True or False
Answer:
True.
Explanation:
Read the chemical equation shown.
3SO2 + 2HNO3 + 2H₂O → 3H₂SO4 + 2NO
Which statement is true about this chemical equation?
OH (hydrogen) was oxidized and S (sulfur) was reduced.
OH (hydrogen) was reduced and N (nitrogen) was oxidized.
OS (sulfur) was oxidized and N (nitrogen) was reduced.
OS (sulfur) was reduced and N (nitrogen) was oxidized.
The statement "OH (hydrogen) was oxidized and S (sulfur) was reduced" is true about this chemical equation.
This chemical reaction is between Sulfur dioxide and nitric acid along with water. When nitric acid reacts with Sulfur dioxide, it gives sulfuric acid and nitrogen monoxide.
In the reaction, the hydrogen atoms in H₂O are oxidized to form H₂SO₄, and the sulfur atoms in SO₂ are reduced to form H₂SO₄.
Therefore, the OH from the water molecule gets oxidized to give out Sulfuric acid. Likewise, the Sulfur from Sulfur dioxide reduces to form the product that is sulfuric acid.
Therefore, the best option that suits the reaction is OH (hydrogen) was oxidized and S (sulfur) was reduced.
To know more about oxidation reactions, click below:
https://brainly.com/question/25886015
#SPJ9
Answer:
I believe the above answer is correct after my test i will let everyone know.
Explanation:
A buffer system is set up with [A] = 1.5[HA ]. If pKa = 5.4, what is the pH of the buffer?
5.57 is the pH of the buffer .
What is buffer ?
Buffer, in chemistry, usually a solution containing acids and bases or salts that tends to maintain a constant concentration of hydrogen ions. An ion is an atom or molecule that has lost or gained one or more electrons. A common buffer is a solution of acetic acid (CH3COOH) and sodium acetate. In aqueous solution, sodium acetate completely dissociates into sodium (Na+) and acetate (CH3COO-) ions. Buffer solutions with different hydrogen ion concentrations can be prepared by varying the buffer ratio and choosing acids of appropriate intrinsic strength. Commonly used buffers include phosphate, citrate, or borate and their salts
To learn more about Buffer , click the link below ;
https://brainly.com/question/26416276
#SPJ9
What is the physical state of caesium at 25 degrees?
Answer:
298k
Explanation:
because 298k is lower than 302k
What is the condensed structural formula for 2,2-dimethylbutane?
CH3(CH2)2CH3
(CH3)3CCH2CH3
C6H4(CH3)2
CH3CH2CH2CH2CH3
The structural formula for 2,2-dimethylbutane in the above task is (CH3)3CCH2CH3.
The correct answer choice is option b.
The structural formula for 2,2-dimethylbutane.It follows that the structural formula for the above compound in the above task has 4 carbon atoms as the parent chain and has 2 different methyl substituents on the same carbon 2.
The image to the paper work is attached for more clearity.
The compound; 2,2-dimethylbutane ( (CH3)3CCH2CH3 ) belong to an alkane family. They have a general formula CnH2n+2.
So therefore, we can now confirm from the explanation given above that the only correct answer for the structural formula of the compound above is (CH3)3CCH2CH3
Read more on structural formula:
https://brainly.com/question/16693647
#SPJ1
What is the equilibrium constant K at 25 °C for an electrochemical cell when E° = +0.0165 V and n = 2?(F = 96,500 J/(V･mol), R = 8.314 J/(mol･K))
The equilibrium constant K of the electrochemical cell is 2.976.
What is equilibrium constant ?The equilibrium constant of a chemical reaction is described as the value of its reaction quotient at chemical equilibrium, a state approached by a dynamic chemical system after sufficient time has elapsed at which its composition has no measurable tendency towards further change.
We have that:
ΔG = -nFE°cell
n = 2
Force value = 96,500 J/(V･mol)
E°cell = +0.0140 V
ΔG = -(2 * 96,500 * 0.0140)
ΔG = -2702 J
Then,
But;
ΔG = -R TlnK
lnK = -(ΔG/RT)
The value of K = e^[-(ΔG/RT))
The value of K = e^[-(( -2702)/8.314 * 298]
The value of K = 2.976
Learn more about equilibrium constant at:
https://brainly.com/question/3159758
#SPJ1
Are there any concerns if you wait an hour or two after you calibrate the spectrophotometer to obtain the absorbance of your solutions and unknown? Explain your answer.
No, there are no concerns if you wait an hour or two after you calibrate the spectrophotometer to obtain the absorbance of your solutions and unknown as it will not change because the light source is not aging faster but if your light source age faster, then there are concerns.
Why should it be a problem when the light source is aging faster?In the case above, light source is the issue because it is deteriorating quickly. If you're lucky, the lamp's usable life will be at least four digits of hours. On the other hand, allowing the lamp to stabilize itself speeds up aging. Given the limited lifespan, it is advisable to calibrate frequently such as daily.
The calibration rate is determined by the goal of the measurement. For most photometric tests, parameter variations in the interval between calibration and measurement will be negligibly large enough to significantly increase the overall measurement error. (Take note that the amount of error in typical analytical measurements, including sample preparation, is often at or above 10%.)
The routine calibration then appears to be unnecessary because the effort you put out will be pointless. In any instance, the experimental analysis of the impact of daily or biweekly calibration (often conducted inside validation studies) will offer the response.
It may even make sense to calibrate the instrument every 5 or 10 operational hours if you are using it continuously for a long length of time. If the manufacturer changes the cuvette materials (they will also change the Lot No.), you should recalibrate depending on the light source's lifespan and the materials you used to place your samples there. however, you should be cautious of dust because it might significantly alter the outcomes if the lenses have dirt.
Learn more about spectrophotometer from
https://brainly.com/question/24864511
#SPJ1
How many grams of propane can combust at 25°C and 1.04 atm if reacting with 14.7 L of oxygen gas?
The volume of oxygen is 14.7 litres.
What is volume?
volume is a measure of occupied three dimensional space.
Sol-Balanced chemical reaction: C₃H₈ + 5O₂ → 3CO₂ + 4H₂O.
m(C₃H₈-propane) = 5.53 g.
n(C₃H₈) = m(C₃H₈) ÷ M(C₃H₈).
n(C₃H₈) = 5.53 g ÷ 44.1 g/mol.
n(C₃H₈) = 0.125 mol.
From chemical reaction: n(C₃H₈) : n(O₂) = 1 : 5.
n(O₂) = 0.625 mol.
T = 25° = 298.15K.
p = 1.04 atm.
R = 0.08206 L·atm/mol·K.
Ideal gas law: p·V = n·R·T .
V(O₂) = n·R·T / p.
V(O₂) = 0.625 mol · 0.08206 L·atm/mol·K · 298.15 K / 1.04 atm.
V(O₂) = 14.7 L.
To know more about volume click-
https://brainly.com/question/23963432
#SPJ1
A 98.3 g piece of copper (specific heat 0.380 J/g･°C) is heated and then placed into 400.0 g of water initially at 20.7°C. The water increases in temperature to 22.2°C. What is the initial temperature (in °C) of the copper? (The specific heat of water is 4.184 J/g･°C)
The initial temperature of copper is 89.41°C.
How to calculate temperature?Calorimetry is the science of measuring the heat absorbed or evolved during the course of a chemical reaction or change of state.
According to this question, a 98.3 g piece of copper with specific heat of 0.380 J/g･°C is heated and then placed into 400.0 g of water initially at 20.7°C. The water increases in temperature to 22.2°C. The initial temperature can be calculated as follows;
Q = mc∆T
Where;
Q = quantity of energym = mass of substancec = specific heat capacity∆T = change in temperatureQ(water) = -Q(metal)
400 × 4.184 × 1.5 = -(98.3 × 0.38 × {22.2 - x})
2510.4 = - (829.26 - 37.354x)
2510.4 = -829.26 + 37.354x
3339.659 = 37.354x
X = 89.41°C
Therefore, 89.41°C is the initial temperature of the copper metal.
Learn more about calorimetry at: https://brainly.com/question/2566525
#SPJ1
The initial temperature of the copper piece is approximately 0.72°C.
Explanation:
To find the initial temperature of the copper piece, we can use the equation Q = mcΔT, where Q is the heat energy, m is the mass of the substance, c is the specific heat capacity, and ΔT is the change in temperature.
First, let's calculate the heat energy gained by the water. The mass of the water is 400.0 g, and the change in temperature is 22.2°C - 20.7°C = 1.5°C.
Using the equation Q = mcΔT, we have:
Q_water = (400.0 g)(4.18 J/g • °C)(1.5°C) = 2490 J
Next, let's calculate the heat energy lost by the copper piece. The mass of the copper is 90.7 g, and the change in temperature is the same as the water, 1.5°C.
Using the equation Q = mcΔT, we have:
Q_copper = (90.7 g)(0.380 J/g • °C)(1.5°C) = 51.8 J
Since energy is conserved, the heat energy gained by the water is equal to the heat energy lost by the copper piece:
Q_water = Q_copper
2490 J = 51.8 J
Now, let's solve for the initial temperature of the copper piece. Rearranging the equation Q = mcΔT to solve for the initial temperature, we have:
T_initial = (Q_copper) / (m_copper * c_copper)
Substituting the values, we get:
T_initial = (51.8 J) / (90.7 g * 0.380 J/g • °C) ≈ 0.72°C
Therefore, the initial temperature of the copper piece is approximately 0.72°C.
Learn more about calculating the initial temperature of a copper piece here:
https://brainly.com/question/34159934
#SPJ14
Consider the reaction: A+B---->2C. If 0.80 moles of C are formed, how many moles of A have been consumed by the reaction?
Answer:
0.40 mole of A
Explanation:
1 mole of A to produce 2 moles of C
so the number of mole of A to produce 0.80 mole of C is:
(0.80 x 1)/(2) = 0.40 mole
Why do all elements have their own unique color? Please explain.
All the element have their own unique color because the every element have their own set of energy levels.
According to the bohr model of atoms : electrons exist at certain energy levels. when we give heat to electron , it gets excited and moves from lower energy level to higher energy level. the electron is less stable in higher energy level. when an electron returns from higher energy level to lower energy level it emits some energy in form of radiation. The wavelength of light depends upon energy level . and every elements have their own unique energy levels. The color for different element is different.
Thus, All the element have their own unique color because the every element have their own set of energy levels.
To learn more about element colors here
https://brainly.com/question/5809727
#SPJ1
2. If a solid dissolves in the liquid, sedimentation and decantation method cannot be used.Why?
Answer:
The answer is if a solid gets dissolved in a liquid then sedimentation and decantation cannot be used because these methods are used to separate an insoluble solid substance but if we add a little sugar or salt it will dissolve in the liquids it is soluble solid making it hard to separate.
Explanation:
I hope this helps
Convert the boiling temperature of liquid ammonia, −28.1 °F, into degrees Celsius and Kelvin. Show the calculations.
-28.1 °F is a temperature in Fahrenheit and is converted to degrees Celsius and Kelvin as follows:
-33.39°C239.76KHow to convert Fahrenheit to Kelvins?Temperature is the measure of cold or heat, often measurable with a thermometer.
Temperature can be measured in the following units;
Kelvins (absolute temperature)
Degrees Celsius (°C)Degrees Fahrenheit (°F)Kelvins (K) is the international system of units (S.I unit), the base unit of thermodynamic temperature; 1⁄273 of the thermodynamic temperature of the triple point of water.
Degrees Celsius is the metric unit of temperature, a derived unit of the International System of Units.
°F is converted to °C as follows:
(32°F − 32) × 5/9 = 0°C
-28.1°F = -33.39°C
°F is converted to K as follows:
(-28.1°F − 32) × 5/9 + 273.15 = 239.761K
= 239.76K
Learn more about temperature at: https://brainly.com/question/13421795
#SPJ1
What is the pH of a solution prepared by adding 25.0 mL of 0.199 M ammonia to 25 mL of 0.199 M hydrochloric acid solution?
The pH of a solution prepared by adding 25.0 mL of 0.199 M ammonia to 25 mL of 0.199 M hydrochloric acid solution is less than 7.
What is the pH of a solution?The pH of a solution is calculated as follows;
pH = - log ([H⁺])
Also, pH = 14 - pOH
The pH of the solution is determined as follows;
Moles of HCl = 0.199 M * 25 mL * 1L/1000 mL
moles of acid = 0.004975 moles
Moles of NH₃ = 0.199 M * 25 mL * 1L/1000 mL
moles of NH₃ = 0.004975 moles
0.004975 moles of HCl reacts with 0.004975 moles of NH₃
Since NH₃ is a weak acid, the pH of the solution is slightly lower than 7.
Learn more about pH at: https://brainly.com/question/22390063
#SPJ1
Write the net ionic equation for this reaction Fe₂(SO4)3²(aq)+3K₂S(aq) → Fе₂S3(s)+3 K₂SO4(aq)
For the reaction N2(g) + 3H2(g) ↔ 2NH3(g), the equilibrium constant, K, = 9.83 x 10-2 at a certain temperature and pressure.
While the reaction was proceeding at this temperature and pressure the concentrations of the reactants and products were measured and found to be
[N2] = 0.910 mol/L
[H2] = 0.300 mol/L
[NH3] = 0.0081 mol/L
a. Was the reaction at equilibrium? Explain. (4 marks)
b. If the reaction was not at equilibrium, in which direction was it proceeding? Explain
The reaction is not at equilibrium and it is in the forward direction.
a.
Given,
[N₂] = 0.910 mol / L
[H₂] = 0.3 mol / L
[NH₃] = 0.0081 mol / L
K = 9.83 x 10⁻²
The balanced chemical equation for the given reaction is,
N₂(g) + 3H₂(g) ⇄ 2NH₃(g)
The formula of equilibrium constant is given by,
K = [NH₃]² / [N₂] [H₂]²
9.83 x 10⁻² = [(0.0081)² ]/ [0.910 × (0.3)²]
⇒9.83 x 10⁻² = (0.00006561) / (0.0819)
⇒9.83 x 10⁻² = 0.0008010989
⇒0.00983 = 0.0008010989
LHS ≠ RHS
Hence, the reaction is not at equilibrium.
b.
The reaction is in forward direction.
Learn more about direction of the reaction from the link given below.
https://brainly.com/question/10278602
#SPJ1
