To find the distance from the central
axis
to the first diffraction minimum, we can use the formula for the position of the first minimum in a single slit diffraction pattern.
The problem asks to determine the distance from the central axis to the first
diffraction
minimum, where a listener will have difficulty hearing the sound waves diffracted through the rectangular opening of a speaker cabinet into a large auditorium.
Distance to the first minimum (y) can be calculated using the formula:y = (λ * D) / a
Where:
λ = wavelength of the sound wave
D = distance from the opening to the wall
a = width of the rectangular opening
Given:
Frequency
of sound waves = 3200 Hz (or cycles per second)
Speed of sound waves = 343 m/s
Length of auditorium = 100 m
Width of rectangular opening = 31.0 cm = 0.31 m
First, we need to find the
wavelength
of the sound wave using the formula: λ = v / f
Where:
v = speed of sound
waves
f = frequency of sound waves λ = 343 m/s / 3200 Hz ≈ 0.107 m
Now, we can calculate the distance to the first minimum using the formula:y = (0.107 m * 100 m) / 0.31 my ≈ 34.52 m
Therefore, a listener will be approximately 34.52 meters away from the central axis at the first diffraction minimum, where they will have difficulty hearing the sound.
To learn more about
diffraction
click here.
brainly.com/question/32864703
#SPJ11
Determine the number of moles of oxygen gas in the following
container.
The container holds 2.90 m3 at 17.84oF and
an a gauge pressure of 16.63kPa.
The number of moles of oxygen gas in the container is determined by the ideal gas law, using the given volume, temperature, and pressure 0.993 moles.
To determine the number of moles of oxygen gas in the container, we can use the ideal gas law, which states that PV = nRT, where P is the pressure, V is the volume, n is the number of moles, R is the ideal gas constant, and T is the temperature in Kelvin.
First, let's convert the given temperature from Fahrenheit to Kelvin:
T(K) = (T(°F) + 459.67) × (5/9)
T(K) = (17.84 + 459.67) × (5/9)
T(K) ≈ 259.46 K
Next, we convert the given pressure from kilopascals (kPa) to pascals (Pa):
P(Pa) = P(kPa) × 1000
P(Pa) = 16.63 kPa × 1000
P(Pa) = 16630 Pa
Now, we can rearrange the ideal gas law equation to solve for n (number of moles):
n = PV / RT
Substituting the known values:
n = (16630 Pa) × (2.90 m³) / ((8.314 J/(mol·K)) × (259.46 K))
Simplifying the equation:
n ≈ 0.993 moles
Therefore, the number of moles of oxygen gas in the container is approximately 0.993 moles.
To learn more about moles click here:
brainly.com/question/15209553
#SPJ11
The distance between two slits is 1.30 × 10-5 m. A beam of coherent light of wavelength 550 nm illuminates these slits, and the distance between the slit and the screen is 2.00 m. a) What is the angular separation between the fourth-order bright fringe and the center of the central bright fringe? () b) What is the distance on the screen between the central bright fringe and the fourth-order bright fringe?
Calculation of the angular separation between the fourth-order bright fringe and the center of the central bright fringeHere, the distance between the two slits = d = 1.30 × 10⁻⁵ m Wavelength of light = λ = 550 nm = 550 × 10⁻⁹ m.
Distance between the slit and the screen = D = 2.00 mThe distance between the central maxima and the fourth-order maxima is given by;y = (nλD) / d = (4 x 550 x 10⁻⁹ x 2) / (1.30 x 10⁻⁵) = 0.000036 = 3.6 x 10⁻⁵ mThe fringe width, w = λD / d = (550 x 10⁻⁹ x 2) / (1.30 x 10⁻⁵) = 0.000090 = 9 x 10⁻⁵ m.
Let the distance between the central maximum and the fourth-order maximum be x radians. Then, for small values of x, tan(x) = xThe angle subtended by the fringe is given by;θ = y / D = (3.6 x 10⁻⁵) / 2.00 = 1.8 x 10⁻⁵ radiansx = θ = 1.8 x 10⁻⁵ radiansTherefore, the angular separation between the fourth-order bright fringe and the center of the central bright fringe is 1.8 x 10⁻⁵ radians.
To know more about angular visit:
https://brainly.com/question/19670994
#SPJ11
The uncertainty principle sets a lower bound on how precisely we can measure conju- gate quantities. For position and linear momentum, it can be expressed as Ox0p ≥ h/2 (a) Consider a small pebble with mass 10-4 kg. We put it at the origin of a ruler and measure its position to within 1 mm, in other words r = 0 + 0.5 mm. According x to the uncertainty principle, this should introduce an uncertainty in its momentum, and thus also its velocity. Compute the minimum uncertainty in the velocity and comment on whether we expect the uncertainty principle to be of relevance in this (macroscopic) system. (b) Now repeat the same computation for an electron of mass 9.11x10-31 kg, whose position we measure to within 1 Angstrom, i.e. 2 = 0 + 5 x 10-11m. Comment on 5 whether the uncertainty principle tells us something of relevance regarding the velocity of the electron.
(a) The minimum uncertainty in the velocity of the pebble is computed using the uncertainty principle and depends on the mass of the pebble, the uncertainty in position, and Planck's constant. In this macroscopic system, the uncertainty principle is not expected to be of relevance.
(b) The minimum uncertainty in the velocity of the electron is also computed using the uncertainty principle, and in this microscopic system, the uncertainty principle provides relevant information about the velocity of the electron.
(a) The uncertainty principle states that there is a fundamental limit to the precision with which certain pairs of physical properties, such as position and momentum, can be simultaneously measured. According to the uncertainty principle equation Ox0p ≥ h/2, where Ox0 is the uncertainty in position, p is the uncertainty in momentum, and h is Planck's constant.
For the pebble with a mass of 10^(-4) kg and an uncertainty in position of 0.5 mm, we can calculate the minimum uncertainty in momentum using the uncertainty principle equation. However, in macroscopic systems like this, the effects of the uncertainty principle are negligible compared to the macroscopic scale of the object. Therefore, the uncertainty principle is not expected to be of relevance in this case.
(b) Now let's consider an electron with a mass of 9.11 x 10^(-31) kg and an uncertainty in position of 5 x 10^(-11) m. Applying the uncertainty principle equation, we can calculate the minimum uncertainty in momentum and subsequently determine the minimum uncertainty in velocity for the electron.
In the case of the electron, the effects of the uncertainty principle are significant due to its extremely small mass and the quantum nature of particles at the microscopic level. The uncertainty principle tells us that even with precise measurements of position, there will always be an inherent uncertainty in momentum and velocity.
Therefore, the uncertainty principle provides relevant information about the velocity of the electron, indicating that it cannot be precisely determined simultaneously with position.
To know more about velocity refer here:
https://brainly.com/question/18084516#
#SPJ11
The circuit shown has been connected for a long time. If C= 3 uF and = 18 V, then calculate the charge Q (in µC) in the capacitor. ww www 122 13.2 14.4 9.6 07.2 10.8 E 4Ω
The charge Q in the capacitor can be calculated using the formula Q = C * V, where C is the capacitance and V is the voltage across the capacitor. In this case, with a capacitance of 3 uF and a voltage of 18 V, the charge Q in the capacitor is 54 µC.
The charge Q in a capacitor is directly proportional to the capacitance C and the voltage V across the capacitor. The formula to calculate the charge in a capacitor is Q = C * V.
Here, the capacitance C is given as 3 uF (microfarads) and the voltage V is 18 V. To find the charge Q, we simply multiply the capacitance and voltage values: Q = 3 uF * 18 V.
To perform the calculation, we need to ensure that the units are consistent. First, we convert the capacitance from microfarads (uF) to farads (F). Since 1 F is equal to 1,000,000 uF, 3 uF is equal to 3 *[tex]10^{-6}[/tex] F. Plugging this value into the formula, we get: Q = 3 * [tex]10^{-6}[/tex] F * 18 V.
Simplifying the expression, we have Q = 54 * [tex]10^{-6}[/tex] C. To convert the charge from coulombs (C) to microcoulombs (µC), we multiply by 10^6. Thus, Q = 54 * [tex]10^{-6}[/tex] C * 10^6 = 54 µC.
Therefore, the charge Q in the capacitor is 54 µC.
Learn more about capacitor here ;
https://brainly.com/question/31627158
#SPJ11
"All ""Edges"" are ""Boundaries"" within the visual field. True False
The statement "All ""Edges"" are ""Boundaries"" within the visual field" is indeed true.
Edges and boundaries can be distinguished from one another, but they are not mutually exclusive. Edges are areas where there is a sudden change in brightness or hue between neighboring areas. The boundaries are the areas that enclose objects or surfaces.
Edges are a sort of boundary since they separate one region of the image from another. Edges are often utilized to identify objects and extract object-related information from images. Edges provide vital information for characterizing the contours of objects in an image and are required for tasks such as image segmentation and object recognition.
In the visual field, all edges serve as boundaries since they separate the area of the image that has a specific color or brightness from that which has another color or brightness. Therefore, the given statement is true, i.e. All ""Edges"" are ""Boundaries"" within the visual field.
Learn more about brightness at: https://brainly.com/question/32499027
#SPJ11
according to the Bohr model of the atom, an electron in a hydrogen atom experiences a centripetal force 0.0000000825 N (8.25 x 10^-8 N) as it orbits the nucleus. What is the electron's frequency. Your 991MS calculator should know all the constants you need! However the radius of the atom is 5.29 x 10^-11 m, and the mass of an electron is 9.11 x 10^-31 kg. Answer in 'hz' in 2 or 3 sig dig and if you use scientific notation COPY THIS format: 8.25 x 10^8 (literally cut n paste then change the values)
According to the Bohr model of the atom, an electron in a hydrogen atom experiences a centripetal force 0.0000000825 N (8.25 x 10^-8 N) as it orbits the nucleus. The electron's frequency is 3.28 x 10^15 Hz.
The radius of the atom is 5.29 x 10^-11 m, and the mass of an electron is 9.11 x 10^-31 kg.
We need to find the frequency of the electron orbiting around the hydrogen nucleus.
We can use the formula for centripetal force : F = mω²r, where
F is the centripetal force
m is the mass of the electron
ω is the angular velocity of the electron
r is the radius of the electron orbiting the hydrogen nucleus.
The angular velocity can be obtained using the formula : v = ωr
where v is the velocity of the electron and r is the radius of the electron orbiting the hydrogen nucleus.
Rearranging the formula, ω = v/rr is given as
5.29 x 10^-11 m.v = (h/2π) x (1/mvr),
where h is Planck's constant.
mvr = nh/2π, where n is an integer.
So, ω = [(h/2π) x (1/mvr)]/rω = (h/2πm)(1/r²)
The frequency of the electron can be calculated using the formula :
f = ω/2πf = [(h/2πm)(1/r²)]/2πf = h/4π²mr²f
= (6.626 x 10^-34 Js)/(4 x 3.14² x 9.11 x 10^-31 kg x (5.29 x 10^-11 m)²)
f = 3.28 x 10^15 Hz
Therefore, the electron's frequency is 3.28 x 10^15 Hz.
To learn more about centripetal force :
https://brainly.com/question/898360
#SPJ11
An object moves in along the x-axis with an acceleration given by: a = 4+2 + 6t (m/s2). The velocity at t-0.0 s is 70 m/s, and the position at t=0.0 s is 33 m. Calculate the position at t=2
S.
The position at t = 2 s is approximately 181 1/3 meters.
To find the position at t = 2 s, we need to integrate the given acceleration function twice with respect to time to obtain the position function.
Acceleration (a) = 4 + 2t + 6t^2 (m/s^2)
Initial velocity (v) at t = 0.0 s = 70 m/s
Initial position (x) at t = 0.0 s = 33 m
First, we integrate the acceleration function to find the velocity function:
v(t) = ∫(4 + 2t + 6t^2) dt
v(t) = 4t + t^2 + 2t^3/3 + C1
Next, we use the initial velocity to find the value of the constant C1:
v(0.0) = 70
4(0.0) + (0.0)^2 + 2(0.0)^3/3 + C1 = 70
C1 = 70
Now we have the velocity function:
v(t) = 4t + t^2 + 2t^3/3 + 70
Next, we integrate the velocity function to find the position function:
x(t) = ∫(4t + t^2 + 2t^3/3 + 70) dt
x(t) = 2t^2 + t^3/3 + t^4/12 + 70t + C2
Using the initial position, we can find the value of the constant C2:
x(0.0) = 33
2(0.0)^2 + (0.0)^3/3 + (0.0)^4/12 + 70(0.0) + C2 = 33
C2 = 33
Now we have the position function:
x(t) = 2t^2 + t^3/3 + t^4/12 + 70t + 33
To find the position at t = 2 s, we substitute t = 2 into the position function:
x(2) = 2(2)^2 + (2)^3/3 + (2)^4/12 + 70(2) + 33
x(2) = 8 + 8/3 + 16/12 + 140 + 33
x(2) = 8 + 8/3 + 4/3 + 140 + 33
x(2) = 33 + 8 + 4/3 + 140
x(2) = 181 1/3
Therefore, the position at t = 2 s is approximately 181 1/3 meters.
learn more about "Acceleration ":- https://brainly.com/question/460763
#SPJ11
What is the separation between two slits for which 635 nm light has its first minimum at an angle of 30.3°?
To find the separation between two slits that causes the first minimum of 635 nm light to occur at a specific angle, we can use the formula for double-slit interference. By rearranging the formula and substituting the known values, we can calculate the separation between the slits.
The formula for double-slit interference is given by:
sin(θ) = m * λ / d
Where:
θ is the angle at which the first minimum occurs
m is the order of the minimum (in this case, m = 1)
λ is the wavelength of light
d is the separation between the slits
By rearranging the formula and substituting the known values (θ = 30.3°, λ = 635 nm, m = 1), we can solve for the separation between the slits (d). This will give us the required distance between the slits to achieve the first minimum at the given angle for 635 nm light.
Learn more about the light here: brainly.com/question/29788343
#SPJ11
The magnitude of a force vector F is 83.6 newtons (N), The x component of this vector is directed along the +x axis and has a magnitude of 71.3 N. The y component points along the +y axis.
The y component of the force vector F is square root of [(83.6 N)^2 - (71.3 N)^2].
Given that the magnitude of the force vector F is 83.6 N and the x component of the force vector is 71.3 N, we can use the Pythagorean theorem to find the y component.
The Pythagorean theorem states that the square of the magnitude of a vector is equal to the sum of the squares of its components. In this case, we have:
|F|^2 = |Fx|^2 + |Fy|^2
Substituting the given values, we have:
(83.6 N)^2 = (71.3 N)^2 + |Fy|^2
Simplifying the equation, we get:
(83.6 N)^2 - (71.3 N)^2 = |Fy|^2
Calculating the values, we have:
|Fy|^2 = (83.6 N)^2 - (71.3 N)^2
Taking the square root of both sides to find the magnitude of Fy, we have:
|Fy| = √[(83.6 N)^2 - (71.3 N)^2]
Therefore, the magnitude of the y component of the force vector F is the square root of [(83.6 N)^2 - (71.3 N)^2].
To learn more about force , click here : https://brainly.com/question/26115859
#SPJ11
The maximum speed a car can drive in a circle without sliding is limited by the friction force between tire and road surface. The coefficient of static friction between car tire and a circular track is 0.97. How long does it take a 2000-kg car to complete one circle if the car is driving at 85% of the maximum speed around this 100 m radius track? (Hint: find the maximum speed
first.) Is the answer different if the car mass is 3000 kg? Why?
It takes approximately 225.6 s for the 2000-kg car to complete one circle around this 100 m radius track and if the car mass is 3000 kg , then the maximum speed is different because the maximum speed a car can drive in a circle without sliding is independent of the car's mass. This is because the gravitational force on the car is balanced by the normal force from the road surface, which is proportional to the car's mass.
(a) The maximum speed for a car to drive in a circle without sliding is given as follows : Vmax=√(μRg)
where μ is the coefficient of static friction, R is the radius of the circle, and g is the acceleration due to gravity.
So, we can substitute the given values to find
Vmax =√(0.97×100×9.8) = 31.05m/s
Now we can use the following equation to find the time it takes for the 2000-kg car to complete one circle :
T = 2πr/v = 2πr/(0.85×Vmax) where r is the radius of the circle.
We can substitute the given values and solve for T :
T=2π(100)/(0.85×31.05) = 225.6 s
Thus, it takes approximately 225.6 s for the 2000-kg car to complete one circle around this 100 m radius track.
(b) The answer is different if the car mass is 3000 kg because the maximum speed a car can drive in a circle without sliding is independent of the car's mass. This is because the gravitational force on the car is balanced by the normal force from the road surface, which is proportional to the car's mass.
Therefore, the answer to the previous part of the question remains the same regardless of the car's mass.
Thus, the correct answers are (a) 225.6 s (b) if the car mass is 3000 kg , then the maximum speed is different .
To learn more about speed :
https://brainly.com/question/13943409
#SPJ11
Solve the following word problems showing all the steps
math and analysis, identify variables, equations, solve and answer
in sentences the answers.
Calculate the height of a building from which a person drops from the roof
a rock and it takes 5s to fall to the ground.
We are given the time that a rock falls from the roof of a building to the ground. We can use kinematic equations to determine the height of the building.
Let us assume that the rock is dropped from rest and air resistance is negligible. Identifying the variables: Let h be the height of the building (in meters). Let t be the time it takes for the rock to hit the ground (in seconds). Let g be the acceleration due to gravity (-9.81 m/s²). Let vi be the initial velocity of the rock (0 m/s). Let vf be the final velocity of the rock just before it hits the ground.
Let's write the kinematic equations: vf = vi + gt. Since the rock is dropped from rest, vi = 0, so the equation becomes:v f = gt. We can use this equation to find the final velocity of the rock:vf = gt = (-9.81 m/s²)(5 s) = -49.05 m/s. Since the final velocity is negative, this means that the rock is moving downwards with a speed of 49.05 m/s just before it hits the ground. Now we can use another kinematic equation to find the height of the building:h = vi t + 1/2 gt²Since the rock is dropped from rest, vi = 0, so the equation becomes:h = 1/2 gt²Plugging in the values:g = -9.81 m/s²t = 5 sh = 1/2 (-9.81 m/s²)(5 s)² = 122.625 m. The height of the building is 122.625 meters.Answer: The height of the building is 122.625 meters.
Learn more about velocity:
brainly.com/question/80295
#SPJ11
Ohanian H.C. Classical el... X 1. M. VISLIO anu w. L. mains, Am. J. rnys. 47, (1919). • Problems 1. Calculate the ratio of the strengths of the electric and gravitational forces between an electron and proton placed some distance apart.
The ratio of the strengths of the electric and gravitational forces between an electron and proton placed some distance apart is approximately 2.3 × 10³⁹. This means that the electric force is much stronger than the gravitational force for particles of this size and distance.
The ratio of the strengths of the electric and gravitational forces between an electron and proton placed some distance apart can be calculated using the formula for electric force and the formula for gravitational force, as shown below:
The electric force (Fe) between two charged objects can be calculated using the formula:
Fe = kq₁q₂/r²
where k is Coulomb's constant (k = 9 × 10⁹ Nm²/C²), q₁ and q₂ are the magnitudes of the charges on the two objects, and r is the distance between them.
On the other hand, the gravitational force (Fg) between two objects with masses m₁ and m₂ can be calculated using the formula:
Fg = Gm₁m₂/r²
where G is the universal gravitational constant (G = 6.67 × 10⁻¹¹ Nm₂/kg²).
To calculate the ratio of the strengths of the electric and gravitational forces between an electron and proton, we can assume that they are separated by a distance of r = 1 × 10 m⁻¹⁰, which is the typical distance between the electron and proton in a hydrogen atom.
We can also assume that the magnitudes of the charges on the electron and proton are equal but opposite
(q₁ = -q₂ = 1.6 × 10⁻¹⁹ C). Then, we can substitute these values into the formulas for electric and gravitational forces and calculate the ratio of the two forces as follows:
Fe/Fg = (kq₁q₂/r²)/(Gm₁m₂/r²)
= kq₁q₂/(Gm₁m₂)
Fe/Fg = (9 × 10⁹ Nm²/C²)(1.6 × 10⁻¹⁹ C)²/(6.67 × 10-11 Nm²/kg²)(9.1 × 10⁻³¹ kg)(1.67 × 10⁻²⁷ kg)
Fe/Fg = 2.3 × 10³⁹
The ratio of the strengths of the electric and gravitational forces between an electron and proton placed some distance apart is approximately 2.3 × 10³⁹. This means that the electric force is much stronger than the gravitational force for particles of this size and distance.
To know more about gravitational forces, visit:
https://brainly.com/question/32609171
#SPJ11
A satellite in Earth orbit has a mass of 100 kg and is at an altitude of 2.00 × 10⁶m.(b) What is the magnitude of the gravitational force exerted by the Earth on the satellite?
The magnitude of the gravitational force exerted by the Earth on the satellite is approximately 1.32 × 10⁴ N.
The gravitational force between two objects can be calculated using the formula:
F = G * (m1 * m2) / r²
where F is the gravitational force, G is the gravitational constant (approximately 6.674 × 10⁻¹¹ N m²/kg²), m1 and m2 are the masses of the two objects, and r is the distance between their centers of mass.
In this case, the mass of the satellite (m1) is 100 kg, and the distance between the satellite and the center of the Earth (r) is the sum of the Earth's radius (6.37 × 10⁶ m) and the altitude of the satellite (2.00 × 10⁶ m), which equals 8.37 × 10⁶ m.
Plugging these values into the formula, we get:
F = (6.674 × 10⁻¹¹ N m²/kg²) * (100 kg * 5.97 × 10²⁴ kg) / (8.37 × 10⁶ m)²
≈ 1.32 × 10⁴ N
The magnitude of the gravitational force exerted by the Earth on the satellite is approximately 1.32 × 10⁴ N. This force keeps the satellite in orbit around the Earth.
To learn more about gravitational force, visit
https://brainly.com/question/14874038
#SPJ11
Unpolarised light passes through two polaroid sheets. The axis
of the first is horizontal, and that of the second is 50◦ above the
horizontal. What percentage of the initial light is
transmitted?
Unpolarised light passes through two polaroid sheets. The axisof the first is horizontal, and that of the second is 50◦ above the horizontal. Approximately 75.6% of the initial light is transmitted through the two polaroid sheets.
When unpolarized light passes through two polaroid sheets with different orientations, the percentage of light transmitted can be determined using Malus' law.
Malus' law states that the intensity of transmitted light (I) through a polarizing filter is proportional to the square of the cosine of the angle (θ) between the polarization direction of the filter and the direction of the incident light.
Given:
Axis of the first polaroid sheet: Horizontal
Axis of the second polaroid sheet: 50° above the horizontal
To calculate the percentage of the initial light transmitted, we need to find the angle between the polarization directions of the two sheets.
The angle between the two polarizing axes is 50°. Let's denote this angle as θ.
According to Malus' law, the intensity of transmitted light through the two polaroid sheets is given by:
I_transmitted = I_initial × cos²(θ)
Since the initial light is unpolarized, its intensity is evenly distributed in all directions. Therefore, the initial intensity (I_initial) is the same in all directions.
The percentage of the initial light transmitted is then given by:
Percentage transmitted = (I_transmitted / I_initial) × 100
Substituting the values into the equations, we have:
Percentage transmitted = cos²(50°) ×100
Calculating the value:
Percentage transmitted ≈ 75.6%
Therefore, approximately 75.6% of the initial light is transmitted through the two polaroid sheets.
To learn more about polarization visit: https://brainly.com/question/14457764
#SPJ11
A block with unknown mass (m) is placed on a frictionless surface. It is attached to a spring with an unknown constant (k). Suppose position x = 0 is the equilibrium position (Feq). The spring can also be found at positions x = -5 (F1), x = 5 (F2), and x = 10 (F3).
A) Select the correct description of the magnitude of the spring force on the block.
a. F1 < Feq < F2 < F3
b. F3 < F1 < Feq < F2
c. F2 < F3 < F1 < Feq
d. Feq < F2 < F3 < F1
e. None of the above
B) Select the correct description of the elastic potential energy of the mass-spring system.
a. U1 < Ueq < U2 < U3
b. Ueq < U1 = U2 < U3
c. U3 < U2 < Ueq < U1
d. Ueq = U3 < U1 < U2
e. None of the above
The correct answer is e) None of the above. the elastic potential energy stored in the spring when the block is displaced by the same amount of distance from the equilibrium position will be equal in magnitude. Therefore, the correct answer is b) Ueq < U1 = U2 < U3.
A) Description of the magnitude of the spring force on the block:
The magnitude of the spring force on the block can be calculated using Hooke’s Law. According to Hooke’s Law, the magnitude of the spring force is directly proportional to the displacement from the equilibrium position of the block and spring system. As the spring is ideal or perfect, it will be able to exert the same force on the block when the block is displaced by the same amount of distance from its equilibrium position in both directions. Therefore, the magnitudes of the spring force on the block will be equal in magnitude. Thus the correct answer is e) None of the above.
B) Description of the elastic potential energy of the mass-spring system:
The elastic potential energy (U) of the spring is given by U = ½kx², where k is the spring constant, and x is the displacement of the spring from the equilibrium position. Since the spring is symmetric about the equilibrium position, it is clear that the magnitude of the displacement of the block from the equilibrium position will be the same for both positive and negative directions. Therefore, the elastic potential energy stored in the spring when the block is displaced by the same amount of distance from the equilibrium position will be equal in magnitude. Therefore, the correct answer is b) Ueq < U1 = U2 < U3.
To know more about elastic potential energy visit:
https://brainly.com/question/29311518
#SPJ11
(10%) Problem 2: The image shows a rocket sled, In the top image all four forward thrusters are engaged, creating a total forward thrust of magnitude 47, where T =519 N. In the bottom image, in addition to the four forward thrusters, one reverse thruster is engaged, creating a reverse thrust of magnitude 7. In both cases a backward force (friction and air drag) of magnitude f = 20 Nacts on the sled. 7 What is the ratio of the greater acceleration to the lesser acceleration?
The ratio of the greater acceleration to the lesser acceleration is approximately 0.985.
In the top image where all four forward thrusters are engaged, the total forward thrust exerted on the sled is 519 N. The backward force due to friction and air drag is 20 N. Using Newton's second law, we can calculate the acceleration in this case:
Forward thrust - Backward force = Mass * Acceleration
519 N - 20 N = Mass * Acceleration₁
In the bottom image, in addition to the four forward thrusters, one reverse thruster is engaged, creating a reverse thrust of magnitude 7 N. The backward force of friction and air drag remains the same at 20 N. The total forward thrust can be calculated as:
Total forward thrust = Forward thrust - Reverse thrust
Total forward thrust = 519 N - 7 N = 512 N
Again, using Newton's second law, we can calculate the acceleration this case:
Total forward thrust - Backward force = Mass * Acceleration
512 N - 20 N = Mass * Acceleration₂
To find the ratio of the greater acceleration (Acceleration₂) to the lesser acceleration (Acceleration₁), we can divide the equations:
(Acceleration₂) / (Acceleration₁) = (512 N - 20 N) / (519 N - 20 N)
Simplifying the expression, we get:
(Acceleration₂) / (Acceleration₁) = 492 N / 499 N
(Acceleration₂) / (Acceleration₁) ≈ 0.985
To learn more about magnitude -
brainly.com/question/32755502
#SPJ11
A proton is placed between two parallel conducting plates in a vacuum prod Electric Field that is moving towards the right. The proton gains a velocity of 3.25 x 10^5 after moving from its initial position. What is the electric potential between the two plate
In the given scenario, a proton is placed between two parallel conducting plates in a vacuum, experiencing an electric field that is moving towards the right. The proton gains a velocity, and we need to determine the electric potential between the two plates.
To calculate the electric potential between the two plates, we can use the equation for the change in electric potential energy, ΔPE = qΔV, where ΔPE is the change in electric potential energy, q is the charge, and ΔV is the change in electric potential.
The work done on the proton is equal to the change in its kinetic energy, which can be calculated using the equation ΔKE = (1/2)mv^2, where ΔKE is the change in kinetic energy, m is the mass of the proton, and v is its final velocity.
By equating the work done on the proton to the change in its kinetic energy, we can solve for the change in electric potential. Since the proton gains energy, the change in electric potential will be negative.
The electric potential between the two plates is then determined by considering the initial and final positions of the proton and calculating the change in electric potential using the given equations.
Learn more about electric here;
https://brainly.com/question/1100341
#SPJ11
Oscillations in the elevator Gravity stretches an elastic thin wire of 1 m length by 15.5 mm as 500 g mass is attached. Determine the oscillation period, if the wire is initially stretched a little more. Which length does a pendulum thread need to have, if the pendulum should have the same period? Now put the pendulum into an elevator. The elevator accelerates and is going up: The velocity increases linearly in time during the first 3 s until reaching 24 m/s. Sketch the deflections of the pendulum versus time t in the elevator frame of reference 0.5 s before the elevator starts until 0.5 s after the start. The initial deflection is 1°. How will the deflection amplitude change qualitatively? What sort of motions of the pendulum can be observed if the elevator is going down with 9.81 m/s²?
If the elevator is going down with an acceleration of 9.81 m/s² (equal to the acceleration due to gravity), the pendulum will not experience any additional pseudo-force.
To determine the oscillation period of the elastic wire, we can use Hooke's law:
F = k * x
where F is the force, k is the spring constant, and x is the displacement.
Given that the wire is stretched by 15.5 mm (or 0.0155 m) with a 500 g (or 0.5 kg) mass attached, we can calculate the force:
F = m * g = 0.5 kg * 9.81 m/s^2 = 4.905 N
We can now solve for the spring constant:
k = F / x = 4.905 N / 0.0155 m = 316.45 N/m
The oscillation period can be calculated using the formula:
T = 2π * √(m / k)
T = 2π * √(0.5 kg / 316.45 N/m) ≈ 0.999 s
If the wire is initially stretched a little more, the oscillation period will remain the same since it depends only on the mass and the spring constant.
To find the length of the pendulum thread that would have the same period, we can use the formula for the period of a simple pendulum:
T = 2π * √(L / g)
Where L is the length of the pendulum thread and g is the acceleration due to gravity (approximately 9.81 m/s²).
Rearranging the formula, we can solve for L:
L = (T / (2π))^2 * g = (0.999 s / (2π))^2 * 9.81 m/s² ≈ 0.248 m
Therefore, the pendulum thread needs to have a length of approximately 0.248 m to have the same period as the elastic wire.
If the pendulum is put into an elevator that is accelerating upwards, the deflection of the pendulum versus time will change. Initially, before the elevator starts, the deflection will be 1°. As the elevator accelerates upwards, the deflection will increase due to the pseudo-force acting on the pendulum. The deflection will follow a sinusoidal pattern, with the amplitude gradually increasing until the elevator reaches its maximum velocity. The deflection will then start decreasing as the elevator decelerates or comes to a stop.
If the elevator is going down with an acceleration of 9.81 m/s² (equal to the acceleration due to gravity), the pendulum will not experience any additional pseudo-force. In this case, the pendulum will behave as if it is in a stationary frame of reference, and the deflection will follow a simple harmonic motion with a constant amplitude, similar to the case without any acceleration.
Learn more about oscillation here:
https://brainly.com/question/12622728
#SPJ11
Consider two thin wires, wire A and wire B, that are made of pure copper. The length of wire A is the same as wire B. The wire A has a circular cross section with diameter d whereas wire B has a square cross section with side length d. Both wires are attached to the ceiling and each has mass m is hung on it. What the ratio of the stretch in wire A to
the stretch in wire B, ALA/ALs?
The ratio of the stretch in wire A to the stretch in wire B is approximately 4/π or approximately 1.273.
To determine the ratio of the stretch in wire A to the stretch in wire B (ALA/ALB), we can use Hooke's law, which states that the stretch or strain in a wire is directly proportional to the applied force or load.
The formula for the stretch or elongation of a wire under tension is given by:
ΔL = (F × L) / (A × Y)
where:
ΔL is the change in length (stretch) of the wire,
F is the applied force or load,
L is the original length of the wire,
A is the cross-sectional area of the wire,
Y is the Young's modulus of the material.
In this case, both wires are made of pure copper, so they have the same Young's modulus (Y).
For wire A, with a circular cross section and diameter d, the cross-sectional area can be calculated as:
A_A = π × (d/2)² = π × (d² / 4)
For wire B, with a square cross section and side length d, the cross-sectional area can be calculated as:
A_B = d²
Therefore, the ratio of the stretch in wire A to the stretch in wire B is given by:
ALA/ALB = (ΔLA / ΔLB) = (AB / AA)
Substituting the expressions for AA and AB, we have:
ALA/ALB = (d²) / (π × (d² / 4))
Simplifying, we get:
ALA/ALB = 4 / π
Learn more about Hooke's law -
brainly.com/question/2648431
#SPJ11
Electrons from the main beam at the Stanford Linear Accelerator Center can reach speeds as large as 0.9999999997 c. Let these electrons enter a detector 1 m long. Calculate the length of the detector in the rest frame of one of the particles.
The length of the detector in the rest frame of one of the particles is 0.010129 m.
Stanford Linear Accelerator Center is a research institute that has developed an accelerator to generate high-energy electron and positron beams. These beams are then collided with each other or a fixed target to investigate subatomic particles and their properties. The electrons at this facility can reach a velocity of 0.9999999997 c.
The length of the detector in the rest frame of one of the particles is calculated as follows:Let’s start by calculating the velocity of the electrons. V= 0.9999999997 c.
Velocity can be defined as distance traveled per unit time. Hence, it is necessary to use the Lorentz factor to calculate the length of the detector in the rest frame of one of the particles.
Lorentz factor γ is given byγ = 1 / √(1 – v²/c²)where v is the velocity of the particle and c is the speed of light.γ = 1 / √(1 – (0.9999999997c)²/c²)γ = 98.7887
Now that we have the value of γ, we can calculate the length of the detector in the rest frame of one of the particles.The length of the detector as seen by an observer at rest is L = 1 m.
So, the length of the detector in the rest frame of one of the particles is given byL' = L / γL' = 1 m / 98.7887L' = 0.010129 m
Therefore, the length of the detector in the rest frame of one of the particles is 0.010129 m.
Learn more about electron at: https://brainly.com/question/860094
#SPJ11
True or False
Coulomb's Law refers exclusively to point charges.
The given statement Coulomb's Law applies to point charges, as well as to charged objects that can be treated as point charges is false.
In its original form, Coulomb's Law describes the electrostatic force between two point charges. However, the law can also be used to approximate the electrostatic interaction between charged objects when their sizes are much smaller compared to the distance between them. In such cases, the charged objects can be effectively treated as point charges, and Coulomb's Law can be applied to calculate the electrostatic force between them.
To learn more about Coulomb's Law
https://brainly.com/question/506926
#SPJ11
QUESTION 7 At an orange juice plant, orange juice pulp with a density of 1.25 g/mi passes through a pumping station where it is raised vertically by 575m at the rate 11,040.000 as per day. The liquid enters and leaves the pumping station at the same speed and through pass of opaal diameter. Determine the outpu mechanical power (in W) of the sit station fgnore any energy loss due to friction QUESTION An estimated force-time curve for a baseball struck by a bot is shown in the figure (file in Course Content) Let max 16,000 N. 15 ms, and th-2 ms. From this curve, determine the average force (in kN) exerted on the bal QUESTION 9 A billiard ball moving at 5.20 m/s strikes a stationary ball of the same mass. After the collision, the first ball moves at 4.41 m/s at an angle of respect to the original line of motion. Assuming an elastic collision (and ignoring friction and rotational motion), find the struck ball's speed after the collision QUESTION 10 3 points 5 points S points
As the liquid enters and leaves the pumping station at the same speed, it means that there is no net work done, and the output mechanical power of the sit station is zero (0).
The maximum force (Fmax) is 16,000 N, time is 15 ms, and t1/2 is 2 ms.From the graph, we can calculate the average force exerted on the baseball using the formula;Favg
= [tex]∆p/∆t[/tex]where ∆p
= mv - mu is the change in momentum, which can be calculated using the formula; ∆p
= m(v-u)
= F∆t, where F is the force and ∆t is the time.Favg
= [tex]F∆t/∆t[/tex]
= FThe average force exerted on the baseball is equal to the maximum force, Favg
= Fmax
= 16,000 N.Question 9:
The billiard ball moving at 5.20 m/s strikes a stationary ball of the same mass. After the collision, the first ball moves at 4.41 m/s at an angle of θ
= 37° to the original line of motion. Conservation of momentum and kinetic energy can be applied to solve this problem.Before the collision, the momentum of the system is given as;p
= mu + 0
= muAfter the collision, the momentum of the system is given as;p'
= m1v1' + m2v2'where v1' and v2' are the final velocities of the two balls, and m1 and m2 are the masses of the two balls.Using the conservation of momentum, we can equate these two expressions;p
= p'mu
= [tex]m1v1' + m2v2'... (1)[/tex]
Kinetic energy is also conserved in elastic collisions.
To know more about momentum visit:
https://brainly.com/question/30677308
#SPJ11
A lead bullet with is fired at 66.0 m/s into a wood block and comes to rest inside the block. Suppose one quarter of the kinetic energy goes to the wood and the rest goes to the bullet, what do you expect the bullet's temperature to change by? The specific heat of lead is 128 J/kg ∙ K.
Group of answer choices
1.10 K
0.940 K
2.78 K
12.8 K
1.26 K
To calculate the change in temperature of the lead bullet, we need to determine the amount of energy transferred to the bullet and then use the specific heat capacity of lead. Calculating the expression, the change in temperature (ΔT) of the lead bullet is approximately 0.940 K.
We are given the initial velocity of the bullet, v = 66.0 m/s.
One quarter (1/4) of the kinetic energy goes to the wood, while the rest goes to the bullet.
Specific heat capacity of lead, c = 128 J/kg ∙ K.
First, let's find the kinetic energy of the bullet. The kinetic energy (KE) can be calculated using the formula: KE = (1/2) * m * v^2.
Since the mass of the bullet is not provided, we'll assume a mass of 1 kg for simplicity.
KE_bullet = (1/2) * 1 kg * (66.0 m/s)^2.
Next, let's calculate the energy transferred to the bullet: Energy_transferred_to_bullet = (3/4) * KE_bullet.
Now we can calculate the change in temperature of the bullet using the formula: ΔT = Energy_transferred_to_bullet / (m * c).
Since the mass of the bullet is 1 kg, we have: ΔT = Energy_transferred_to_bullet / (1 kg * 128 J/kg ∙ K).
Substituting the values: ΔT = [(3/4) * KE_bullet] / (1 kg * 128 J/kg ∙ K).
Evaluate the expression to find the change in temperature (ΔT) of the lead bullet.
Calculating the expression, the change in temperature (ΔT) of the lead bullet is approximately 0.940 K.
Therefore, the expected change in temperature of the bullet is 0.940 K.
Read more about Thermal energy.
https://brainly.com/question/3022807
#SPJ11
1. If two resistors are in parallel, the potential difference is always shared equally between them (True/False)?
2. Electrical potential is a measure of how much electrical potential energy is associated with each charge. (True/False)?
If two resistors are in parallel, the potential difference is always shared equally between them. 1) The given statement is true. 2) True.
When two resistors are in parallel, the potential difference between them is the same. This means that any component in parallel has the same potential difference between them.
The electrical potential is the difference between the electrical potential of two half-cells of the same voltaic cell. The voltage produced by the voltaic cell can be measured in volts.
Electric potential refers to the amount of work required to transfer a unit charge from one point to another against an electric field.
To learn more about the potential difference, refer to the link:
https://brainly.com/question/23899758
#SPJ4
Comet C has a gravitational acceleration of 31 m/s?. If its mass is 498 kg, what is the radius of Comet C?
The radius of Comet C is approximately 5.87 x 10^-6 meters, given its mass of 498 kg and gravitational acceleration of 31 m/s².
To calculate the radius of Comet C, we can use the formula for gravitational acceleration:
a = G * (m / r²),
where:
a is the gravitational acceleration,G is the gravitational constant (approximately 6.67430 x 10^-11 m³/(kg·s²)),m is the mass of the comet, andr is the radius of the comet.We can rearrange the formula to solve for r:
r² = G * (m / a).
Substituting the given values:
G = 6.67430 x 10^-11 m³/(kg·s²),
m = 498 kg, and
a = 31 m/s²,
we can calculate the radius:
r² = (6.67430 x 10^-11 m³/(kg·s²)) * (498 kg / 31 m/s²).
r² = 1.0684 x 10^-9 m⁴/(kg·s²) * kg/m².
r² = 3.4448 x 10^-11 m².
Taking the square root of both sides:
r ≈ √(3.4448 x 10^-11 m²).
r ≈ 5.87 x 10^-6 m.
Therefore, the radius of Comet C is approximately 5.87 x 10^-6 meters.
To learn more about gravitational acceleration, Visit:
https://brainly.com/question/14374981
#SPJ11
Question 10 Bi-214 has a half-life of 19.7 minutes. A sample of 100g of Bi-124 is present initially. What mass of Bi-124 remains 98.5 minutes later? a A. 6.25 g B. 19,7 g C. 3.125g D. 20 g
10 Bi-214 has a half-life of 19.7 minutes. A sample of 100g of Bi-124 is present initially, the mass of Bi-124 remains 98.5 minutes later is C. 3.125g.
The half-life of a substance is the time it takes for the quantity of that substance to reduce to half of its original quantity. In this case, we are looking at the half-life of Bi-214, which is 19.7 minutes. This means that if we start with 100g of Bi-214, after 19.7 minutes, we will have 50g left. After another 19.7 minutes, we will have 25g left, and so on. Now, we are asked to find out what mass of Bi-214 remains after 98.5 minutes.
We can do this by calculating the number of half-lives that have passed, and then multiplying the initial mass by the fraction remaining after that many half-lives. In this case, we have: 98.5 / 19.7 = 5 half-lives.
So, after 5 half-lives, the fraction remaining is (1/2)^5 = 1/32.
Therefore, the mass remaining is: 100g x 1/32 = 3.125g. Hence, the correct option is C. 3.125g.
Learn more about fraction at:
https://brainly.com/question/29766013
#SPJ11
A 43 kg crate full of very cute baby chicks is placed on an incline that is 31° below the horizontal. The crate is connected to a spring that is anchored to a vertical wall, such that the spring is
parallel to the surface of the incline. (a) ( ) If the crate was connected to the spring at equilibrium length, and then allowed to stretch the spring until the crate comes to rest, determine the spring constant. Assume
that the incline is frictionless and that the change in length of the spring is 1.13 m. (b) If there is friction between the incline and the crate, would the spring stretch more, or less than if the incline is frictionless? You must use concepts pertaining to work
and energy to receive full credit
(a) The spring constant is calculated to be (2 * 43 kg * 9.8 m/s^2 * 1.13 m * sin(31°)) / (1.13 m)^2, using the given values.
(b) If there is friction between the incline and the crate, the spring would stretch less compared to a frictionless incline due to the additional work required to overcome friction.
(a) To determine the spring constant, we can use the concept of potential energy stored in the spring. When the crate is at rest, the gravitational potential energy is converted into potential energy stored in the spring.
The gravitational potential energy can be calculated as:
PE_gravity = m * g * h
where m is the mass of the crate (43 kg), g is the acceleration due to gravity (9.8 m/s^2), and h is the vertical height of the incline.
h = L * sin(theta)
where L is the change in length of the spring (1.13 m) and theta is the angle of the incline (31°). Therefore, h = 1.13 m * sin(31°).
The potential energy stored in the spring can be calculated as:
PE_spring = (1/2) * k * x^2
where k is the spring constant and x is the change in length of the spring (1.13 m).
Since the crate comes to rest, the potential energy stored in the spring is equal to the gravitational potential energy:
PE_gravity = PE_spring
m * g * h = (1/2) * k * x^2
Solving for k, we have:
k = (2 * m * g * h) / x^2
Substituting the given values, we can calculate the spring constant.
(b) If there is friction between the incline and the crate, the spring would stretch less than if the incline were frictionless. The presence of friction would result in additional work being done to overcome the frictional force, which reduces the amount of work done in stretching the spring. As a result, the spring would stretch less in the presence of friction compared to a frictionless incline.
To learn more about friction visit : https://brainly.com/question/24338873
#SPJ11
Five points per problem. 1. A spring is used to launch a 200 g dart horizontally off of a 5 m tall building. The spring has constant k=120 N/m and was compressed 0.04 m. How far in the horizontal direction from where it was shot does the dart land, if it falls a total of 5 m ? Recall the spring potential energy is given by SPE =0.5 ∗k∗ x∧ 2. 2. A bicycle wheel with moment of inertia 1=0.2kgm ∧
2 is accelerated from rest to 30 rad/s in 0.4 s. If the force of the chain is exerted 0.1 m from the pivot, what is the magnitude of the force? 3. A 30 kg dog jumps from rest and reaches a maximum height of 2 m. What is the net force acting on the dog in the upward direction if it acts for 0.8s while he is jumping? 4. A hanging 3 kg. im long fluorescent light is supported on each end by a wire. If the weight of the lamp is evenly distributed, what is the tension in each wire? 5. Two kids are sitting on either side of the pivot of a 15 kg.2 m long seesaw. The pivot is displaced by 0.3 m away from the center of mass of the seesaw. Each child is sitting at the end of the board. If one child is 30 kg. and the seesaw is perfectly balanced, what is the mass of the other child? 6. A cube of ice (literally a cube, with side length 0.02 m and density 0.92 kg/m ∧
3 ) is floating in vodka (density 0.95 kg/m ∧
3 ). What is the fraction of the ice submerged in the vodka if it is in equilibrium?
The answer is 1.
1. Given data: Mass of dart, m = 200 g = 0.2 kg,
Height of building, h = 5 m, Spring constant,
k = 120 N/m, Distance of compression, x = 0.04 m,
Total distance fallen, y = 5 m.
The spring potential energy is given by the relation, SPE = 0.5 * k * x²
The spring potential energy is equal to the kinetic energy of the dart when the spring is released.
Let v be the velocity with which the dart is launched.
The kinetic energy of the dart is given by, KE = (1/2) * m * v²
Applying conservation of energy between potential energy and kinetic energy,
SPE = KE0.5 * k * x²
= (1/2) * m * v²
= sqrt( k * x² / m )Given that the total distance fallen by the dart is y = 5 m and that it was launched horizontally, the time taken for it to reach the ground is given by,
t = sqrt( 2 * y / g )
where g is the acceleration due to gravity.
Using the time taken and the horizontal velocity v, we can determine the horizontal distance traveled by the dart as follows,
Distance = v * t = sqrt( 2 * k * x² * y / (g * m) )
The required distance is Distance = sqrt( 2 * 120 * 0.04² * 5 / (9.81 * 0.2) ) = 1.13 m.
2. Given data: Moment of inertia, I = 0.2 kg m²,
Angular velocity, ω = 30 rad/s,
Time taken, t = 0.4 s,
Distance from pivot, r = 0.1 m.
The torque exerted on the wheel is given by,
T = Iαwhere α is the angular acceleration.
The angular acceleration is given by,α = ω / t The force F applied by the chain causes a torque about the pivot given by,τ = Fr
The magnitude of the force F is then given by,F = τ / r
Substituting the values, I = 0.2 kg m², ω = 30 rad/s,
t = 0.4 s, r = 0.1 m,
we getα = ω / t = 75 rad/s²τ
= Fr = IαF
= τ / r = Iα / r
= (Iω / t) / r
= (0.2 * 30 / 0.4) / 0.1
= 15 N
3. Given data: Mass of dog, m = 30 kg, Maximum height reached, h = 2 m, Time taken, t = 0.8 s.
The net force acting on the dog in the upward direction while it is jumping is given by the relation,
F = mgh / t
where g is the acceleration due to gravity.
Substituting the values, m = 30 kg,
h = 2 m,
t = 0.8 s,
g = 9.81 m/s²,
we get F = mg h / t = (30 * 9.81 * 2) / 0.8
= 735.75 N
4. Given data: Mass of lamp, m = 3 kg, Length of lamp, L = 1 m.
The weight of the lamp acts vertically downwards. The two wires exert equal and opposite tensions T on the lamp, at angles of θ with the vertical.
Resolving the tensions into horizontal and vertical components, Tsin(θ) = mg / 2and,
Tcos(θ) = T cos (θ)We have two equations and two unknowns (T and θ).
Dividing the two equations above, Tsin (θ) / T cos(θ) = (mg / 2) / T cos(θ)tan(θ)
= mg / 2Tcos(θ)²
= T² - Tsin²(θ)
= T² - (mg / 2)²
Substituting the values, m = 3 kg,
L = 1 m, g = 9.81 m/s², we get tan(θ) = 3 * 9.81 / 2 = 14.715
T cos(θ)² = T² - (3 * 9.81 / 2)²
Solving for T cos (θ) and T sin(θ),T cos(θ) = 11.401 N
T sin(θ) = 7.357 N
The tension in each wire is T = √(Tcos (θ)² + Tsin (θ)²) = 13.601 N
5. Given data: Mass of seesaw, m = 15 kg, Length of seesaw, L = 2 m,
Distance of pivot from center of mass, d = 0.3 m, Mass of one child, m1 = 30 kg, Mass of other child, m2 = ?
The seesaw is in equilibrium and hence the net torque about the pivot is zero. The net torque about the pivot is given by,
τ = (m1g)(L/2 - d) - (m2g)(L/2 + d)
where g is the acceleration due to gravity. Since the seesaw is in equilibrium, the net force acting on it is zero and hence we have,
F = m1g + m2g = 0
Substituting m1 = 30 kg,
L = 2 m, d = 0.3 m,
we get,τ = (30 * 9.81)(1.7) - (m2 * 9.81)(2.3) = 0
Solving for m2, we get m2 = (30 * 9.81 * 1.7) / (9.81 * 2.3) = 19.23 kg.
6. Given data: Density of ice, ρi = 0.92 kg/m³, Side length of cube, s = 0.02 m, Density of vodka, ρv = 0.95 kg/m³.
Let V be the volume of the ice cube that is submerged in the vodka. The volume of the ice cube is s³ and the volume of the displaced vodka is also s³.
Since the ice cube is floating, the weight of the displaced vodka is equal to the weight of the ice cube. The weight of the ice cube is given by, Wi = mgi
where gi is the acceleration due to gravity and is equal to 9.81 m/s².
The weight of the displaced vodka is given by, Wv = mvdg where dg is the acceleration due to gravity in vodka.
We have, dg = g (ρi / ρv)The fraction of the ice cube submerged in the vodka is given by,V / s³ = Wv / Wi
Substituting the values, gi = 9.81 m/s², dg = 9.81 * (0.92 / 0.95),
we get V / s³ = Wv / Wi
= (ρv / ρi) * (dg / gi)
= (0.95 / 0.92) * (0.92 / 0.95)
= 1.
To know more about Mass visit:
https://brainly.com/question/11954533
#SPJ11
Recently a spaceXs lunch vehicle was consting at a constant velocity of 15 m/s in the y direction relative to a space station. The pilot of the vehicle tres a special RCS reaction control system) thruster, which causes it to accelerate at 7 m/s in the direction. After as the pilot shuts off the RCS thruster. After the RCS thruster is turned off, find the magnitude of the vehicle's velocity in ex direction
The magnitude of the vehicle's velocity in the x-direction remains unchanged and is 0 m/s.
The magnitude of the vehicle's velocity in the x-direction can be determined by analyzing the given information. Since the vehicle was initially moving at a constant velocity of 15 m/s in the y-direction relative to the space station, we can conclude that there is no change in the x-direction velocity. The RCS thruster's acceleration in the y-direction does not affect the vehicle's velocity in the x-direction. The thruster's action solely contributes to the vehicle's change in velocity along the y-axis. Thus, even after the RCS thruster is turned off, the vehicle maintains its original velocity in the x-direction, resulting in a magnitude of 0 m/s.
To learn more about velocity:
https://brainly.com/question/30559316
#SPJ11
17) The SI units for impulse may be written as: A) kgm²/s² B) kgm/s C) kgm²/s D) kgm/s² 18) The physical quantity that can have the same unit as impulse is: A) force B) work C) power D) momentum 1
The answers are:
17) A) kgm²/s²
18) D) momentum
17) The SI unit for impulse is written as kgm²/s². Impulse is defined as the product of force and time, and its unit is derived from the units of force (kgm/s²) and time (s). Therefore, the SI unit for impulse is kgm²/s².
18) The physical quantity that can have the same unit as impulse is momentum. Momentum is the product of mass and velocity, and its unit is derived from the units of mass (kg) and velocity (m/s). The unit for momentum is kgm/s, which is the same as the unit for impulse (kgm/s).
Impulse and momentum are closely related concepts in physics. Impulse is the change in momentum of an object and is equal to the product of force and time. Momentum is the quantity of motion possessed by an object and is equal to the product of mass and velocity. Both impulse and momentum involve the multiplication of mass and velocity, resulting in the same unit.
Learn more about Impulse and momentum.
brainly.com/question/30766202
#SPJ11
