suppose that 18 j of work is needed to stretch a spring from its natural length of 6 m to a length of 9 m. (a) how much work is needed to stretch the spring from 12 m to 14 m?

The work done by the electric field in moving the proton from a point with a potential of 195 V to a point where it is -35 V is approximately 6.24 x 10^-17 J.

The work done by the electric field in moving a charge q from a point with a potential V1 to a point with a potential V2 is given by:

W = q(V2 - V1)

In this case, the charge q is a proton, which has a charge of +1.60 x 10^-19 C. The potential difference between the two points is:

V2 - V1 = (-35 V) - (195 V) = -230 V

Substituting these values into the equation above, we get:

W = (1.60 x 10^-19 C)(-230 V - 195 V) = -6.24 x 10^-17 J

The negative sign indicates that the electric field does work on the proton, which loses energy as it moves from the point with higher potential to the point with lower potential.

Read more about Electrostatics:

https://brainly.com/question/28814118

#SPJ4

Answer:

44.7 meter per second

Explanation:

The formula to find velocity is

V = (2 · KE / m)^1/2

V = velocity

KE = Kinetic energy

m = mass

Let's calculate

(2 · 10000 / 10) ^1/2 = 44.7 meter per second

Hydrogen (H2) has the highest average kinetic energy per mole at 298 K. So, the correct option is (c) hydrogen.

The average energy of gas particles as a result of their mobility is measured by the gas's average kinetic energy. It is closely related to the gas's temperature, which is a gauge of the system's average particle kinetic energy. The following equation provides a gas's typical kinetic energy:

KEavg = kT (3/2)

where T is the absolute temperature of the gas in Kelvin, k is Boltzmann's constant, and KEavg is the average kinetic energy of a gas.

According to question:

Since a gas's average kinetic energy is directly correlated with its temperature, the gas with the lowest molar mass will have the highest average kinetic energy per mole at any given temperature.

Our calculations based on the molar masses of the given gases at standard conditions (298 K, 1 atm) show that hydrogen (H2) has the lowest molar mass at 2.016 g/mol, followed by carbon dioxide (CO2), water (H2O), and oxygen (O2), which have molar masses of 44.01 g/mol, 18.02 g/mol, and 32.00 g/mol, respectively.

In light of this, at 298 K, hydrogen (H2) has the highest average kinetic energy per mole. Hydrogen is the proper response, which is (c).

To know more about average kinetic energy visit:

https://brainly.com/question/28702344

#SPJ4

The electric field strength is positive, which means that the direction of the electric field is radially outward from the charge.

The electric field strength at a distance r from a point charge q is given by:

[tex]E = k*q/r^2[/tex]

where k is Coulomb's constant, which has a value of approximately[tex]9.0 x 10^9 N m^2/C^2.[/tex]

In this case, we have a point charge [tex]q = 1 nC = 1 x 10^-9 C[/tex]  located at a distance r = 2.5 m.

Substituting these values into the equation above, we get:

[tex]E = (9.0 x 10^9 N m^2/C^2) * (1 x 10^-9 C) / (2.5 m)^2[/tex]

[tex]E = 1.44 x 10^-6 N/C[/tex]

The electric field strength is positive, which means that the direction of the electric field is radially outward from the charge.

Learn more about electric field, here:

https://brainly.com/question/8971780

#SPJ1

Answer:

102.846 Newtons

Explanation:

The equation relating mass, acceleration and force is

F = ma

where

F = force

m = mass

a = acceleration

Given

m = 11.24 kg

a = 9.15 m/s²

F = 11.24 kg x 9.15 m/s²

= 102.846 Newtons

The conclusion that can be drawn from the timeline is that Americans realized their first national government was not strong enough.

Therefore, option A is the correct conclusion that can be drawn from the timeline.

To know more about timeline visit:

https://brainly.com/question/29720829

#SPJ1

Answer:

60mV

Explanation:

But I'm not so sure, i tried

The heat transfer in this situation would be transient, as the temperature of the room, the can, and the drink inside the can are all changing over time.

The heat transfer can be modeled as a two-dimensional problem, since the can is cylindrical in shape and the temperature of the can and the drink inside the can will only depend on the vertical and horizontal components of heat transfer. The coordinate system used to analyze the heat transfer problem would be cylindrical, since it is the most appropriate for modeling a cylindrical object. In this system, the radial direction is along the circular circumference of the can, and the axial direction is along the length of the can. The temperature of the can and the drink inside the can can then be calculated using the two-dimensional equations of heat transfer, which consider both the radial and axial components of heat transfer.

To learn more about heat click here https://brainly.com/question/30603212

#SPJ4

Answer:

Members of a team work together to create a plan, and then members choose different tasks to carry out the plan.

An object whose center of gravity is above its base of support will be unstable if a vertical line projected downward from the center of gravity falls outside of the base of support. This statement is true.

The center of gravity of an object is the point at which its weight can be considered to act. If the center of gravity is above the base of support, the object will tend to tip over or fall if the vertical line projected downward from the center of gravity falls outside of the base of support.

If the base of support is not wide enough to counteract this torque, the object will become unstable and tip over.

To know more about the center of gravity, here

brainly.com/question/21511900

#SPJ4

If the cross-sectional area of the venturi tube is 2 times larger at point a than it is at point b then according to the continuity equation, the airspeed at point B is 0 m/s.

we know that the cross-sectional area of the Venturi tube is 2 times larger at point A than it is at point B.

Therefore, we can infer that the airspeed at point B is higher than the airspeed at point A. To determine the airspeed at point B, we can use the continuity equation.

It states that the mass flow rate of a fluid through a tube is constant at all points along the tube. Mathematically, this can be expressed as:

A1V1 = A2V2

where A1 and V1 are the cross-sectional areas and airspeed, respectively, at point A, and A2 and V2 are the cross-sectional areas and airspeed, respectively, at point B.

We are given that the airspeed at point A is 0 m/s, and the cross-sectional area at point A is 2 times larger than at point B.

Let's denote the cross-sectional area at point B as A, so the cross-sectional area at point A is 2A. We are also given that the airspeed at point B is V2.

By using the continuity equation, we can write:

(2A)(0 m/s) = AV2

Simplifying this equation, we get:

V2 = 0 m/s / 2

V2 = 0 m/s

Therefore, according to the continuity equation, the airspeed at point B is 0 m/s.

To learn more about continuity equation:

https://brainly.com/question/19566865

#SPJ4

(a) magnitude of the final velocity is 11.94 m/s, and the (b) angle of the final velocity with respect to the positive x-axis is 37.1°.

We can tackle this issue utilizing kinematic conditions. Since the speed increase is consistent, we can utilize the accompanying conditions:

v = u + at

s = ut + 1/2 [tex]at^2[/tex]

[tex]v^2 = u^2[/tex] + 2as

where u is the underlying speed, v is the last speed, t is the time, s is the dislodging, and an is the speed increase.

Given: u = 4.00 m/s I, a = 5.00[tex]m/s^2[/tex] I + 7.00 [tex]m/s^2[/tex] j, s = 12.0 m lined up with the x-pivot.

Utilizing the second kinematic condition, we can address for the time taken to venture to every part of the distance:

s = ut + 1/2 [tex]at^2[/tex]

12.0 = 4.00t + 1/2 (5.00)[tex]t^2[/tex]

5.00[tex]t^2[/tex] + 4.00t - 12.0 = 0

Settling for t utilizing the quadratic recipe, we get:

t = 1.09 s (taking the positive root)

Utilizing the first kinematic condition, we can tackle for the last speed in the x-course:

v_x = u_x + a_x t

v_x = 4.00 + 5.00(1.09)

v_x = 9.45 m/s

Utilizing the Pythagorean hypothesis, we can track down the greatness of the last speed:

|v| = sqrt([tex]v_x^2 + v_y^2[/tex])

|v| = sqrt(([tex]9.45)^2[/tex] + ([tex]7.00)^2[/tex])

|v| = 11.94 m/s

Utilizing the reverse digression capability, we can track down the point of the last speed regarding the positive x-hub:

θ = [tex]tan^(- 1)[/tex](v_y/v_x)

θ = [tex]tan^(- 1)[/tex](7.00/9.45)

θ = 37.1°

Thusly, the (a) magnitude of the last speed is 11.94 m/s, and the (b) angle of its velocity as for the positive x-pivot is 37.1°.

To learn more about magnitude and angle of velocity, refer:

https://brainly.com/question/24180566

#SPJ4

The complete question is:

A moderate wind accelerates a pebble over a horizontal xy plane with a constant acceleration  

a=(5.00m/s 2) i^+(7.00m/s 2) j^ .

At time t=0, the velocity is (4.00m/s) i ^.What are the (a) magnitude and (b) angle of its velocity when it has been displaced by 12.0m parallel to the x axis?

Pluto's orbit is much more eccentric and inclined compared to the orbits of the eight major planets in the solar system. This means that Pluto's orbit is more elliptical and tilted relative to the plane of the solar system, while the orbits of the major planets are generally more circular and on the same plane.


First, Pluto's orbit is much more eccentric (elongated) than the orbits of the other planets. This means that its distance from the Sun varies more dramatically over the course of its orbit. While the other planets have nearly circular orbits, Pluto's orbit is more oval-shaped.

Second, Pluto's orbit is also more inclined (tilted) relative to the plane of the Solar System. The eight major planets all orbit in roughly the same plane, but Pluto's orbit is tilted at an angle of about 17 degrees. This means that it sometimes travels above and below the plane of the Solar System during its orbit.

Learn more about Pluto at https://brainly.com/question/13037755

#SPJ11

The resistance of the wire will increase by a factor of 8.

When the length of a wire is doubled, its resistance also doubles because resistance is directly proportional to the length. On the other hand, when the diameter of the wire is halved, the cross-sectional area of the wire reduces by a factor of 4 (πr^2 -> π(r/2)^2). As a result, the resistance decreases by a factor of 1/4.

So, when both changes are made, the resistance of the wire increases by a factor of 8 (2 x 4). This is because the effect of doubling the length is greater than the effect of halving the diameter. Thus, the net effect is an increase in resistance. This relationship between resistance, length, and cross-sectional area is described by the formula for resistance, which is R = ρL/A, where R is the resistance, ρ is the resistivity of the material, L is the length of the wire, and A is its cross-sectional area.

Learn more about resistance here:

https://brainly.com/question/29427458

#SPJ4

The presidential elections in America take place every four years and Americans decide who will be the President for the next four years.

Every four years on Election Day, American citizens vote for a new president.

During the primary election, people in each political party (e.g. Democrat and Republican) vote for a candidate to represent their party. The candidates who win the primary election for their political party go on to the general election.

During the general election, there is a popular vote and an Electoral College vote. First, the citizens vote for who they want to be president in the popular vote. Then, during the Electoral College vote, the electors vote for the president based on who won the popular vote.

The popular vote is "one person, one vote" whereas the Electoral College vote is "winner takes all." That means, if a candidate wins the majority of votes in the popular vote, that candidate wins the Electoral College votes.

If no candidate wins the majority of the electoral votes, the House of Representatives chooses the president.

Learn more about elections at:https://brainly.com/question/25815264

#SPJ1

The angular acceleration of the potter's wheel that moves uniformly is [tex]0.0352 radians/s^2[/tex]

Angular acceleration is a measure of how quickly an object's angular velocity changes with respect to time. In this case, the potter's wheel undergoes a uniform acceleration, which means that its angular acceleration remains constant over time.

We can use the following equation to find the angular acceleration of the potter's wheel:

angular acceleration = (final angular speed - initial angular speed) / time

Here, the initial angular speed is zero because the wheel starts from rest. The final angular speed is 0.19 rev/s. The time taken to reach this speed is 34.0 s. We can convert the final angular speed to radians per second using the conversion factor 1 rev/s = 2π radians/s:

final angular speed = 0.19 rev/s * 2π radians/rev = 1.196 radians/s

Put values:

angular acceleration = (1.196 radians/s - 0 radians/s) / 34.0 s = [tex]0.0352 radians/s^2[/tex]

Therefore, the angular acceleration of the potter's wheel is [tex]0.0352 radians/s^2[/tex]

Learn more about angular acceleration here:

https://brainly.com/question/29428475

#SPJ4

Potential energy is a form of stored energy that is dependent on the relationship between different system components.

The bungee cord has 14400 joules of elastic potential energy.

The elastic potential energy of a spring (or in this case, a bungee cord) is given by the formula:

Elastic potential energy = [tex]1/2 * k * x^2[/tex]

Where:

k = spring constant

x = displacement from the equilibrium position

In this case, we know that the spring constant (k) is 800 and the maximum displacement (x) is 6 meters. Plugging these values into the formula, we get:

Elastic potential energy = [tex]1/2 * 800 * 6^2[/tex]

Elastic potential energy = [tex]1/2 * 800 * 36[/tex]

Elastic potential energy = 14400 joules

for such more question on potential energy

brainly.com/question/1242059

#SPJ4

The two kinds of balance that keep the Sun shining are thermal equilibrium and hydrostatic equilibrium.

Thermal Equilibrium: The Sun shines by nuclear fusion, a process in which hydrogen atoms combine to form helium and release energy in the form of light and heat.

Hydrostatic Equilibrium: The Sun is also in hydrostatic equilibrium, which is the balance between the inward gravitational force and the outward pressure force.

These two balances are delicately intertwined and any disturbance to them could result in a catastrophic event such as a supernova or a collapse.

To know more about the sun, here

brainly.com/question/1116384

#SPJ4

The resultant force on the 8.00 nC charge is -0.010 N.

Using Coulomb's law, the electric force between two point charges is given by,

F = k * (q1 * q2) / r^2

where F is the force, k is Coulomb's constant, q1 and q2 are the charges, and r is the distance between the charges.

The force on the 8.00 nC charge due to the -2.50 nC charge:

F1 = k * ((8.00 nC) * (-2.50 nC)) / (0.020 m)^2

= -0.090 N

Note that the negative sign indicates an attractive force, as the charges have opposite signs.

The force on the 8.00 nC charge due to the -4.00 nC charge,

F2 = k * ((8.00 nC) * (-4.00 nC)) / (0.030 m)^2

= -0.080 N

Add these forces vectorially. Since the forces are acting in opposite directions,

Fnet = F1 - F2

= -0.090 N - (-0.080 N)

= -0.010 N

To know more about the electric forces, here

brainly.com/question/2526815

#SPJ4

Bulb C goes out, Bulb A shines brighter (due to higher current), and Bulb B goes out (because to insufficient current) ( due to no current )

The term "electric current" is frequently used to describe how much electricity flows through a circuit and how it flows in an electronic circuit. Amperes are used to measure it (A). As more electricity passes across the circuit, the ampere value increases.

Starting a car, turning on a light, using an electric stove, watching TV, shaving with an electric razor, playing video games, using a phone, and charging a mobile phone are examples of current electricity.

To know more about current visit:

https://brainly.com/question/23323183

#SPJ4

By the help of Kinetic energy ,the ratio of the brick's mass to the pebble's mass is [tex]\frac{9}{25}M = m[/tex]

A moving item or particle might have power of a certain sort called kinetic energy. An object gains kinetic energy when work, which involves the transfer of energy, is done on it by exerting a net force. Kinetic energy is a characteristic of motion that depends on the mass and speed of an object or particle. Motion includes all combinations of vibration, axis rotation, translation, and movement (along a path from one location to another).

M should represent the brick mass.

Let m represent the pebble's mass.

.[tex]\frac{1}{2} M(v)^2[/tex] =KE

[tex]\frac{1}{2} M(3)^2[/tex]=KE

[tex]\frac{1}{2} m(5)^2[/tex]= KE

[tex]\frac{1}{2} M(3)^2= \frac{1}{2} m(5)^2[/tex]

9M = 25m

[tex]\frac{9}{25}M = m[/tex]

Learn more about Kinetic energy

brainly.com/question/26472013

#SPJ4

A nearsighted person has a near point of 12 cm and a far point of 40 cm With the corrective lens in place, the person's new near point will be 0.23 m or 23 cm.

1) Power of corrective lens for clear distant vision:

Near point = 12 cm

Far point = 40 cm

Lens Power = (1 ÷ 0.40) - (1 ÷ 0.12)

Lens Power = 2.5 - 8.33

Lens Power = -5.83 D

2) New near point with the corrective lens in place:

Lens Power = -5.83 Diopters

Far point = 40 cm

New near point = 1 ÷ (-5.83) + 0.40

New near point = -0.171 + 0.40

New near point = 0.23 m

So, with the corrective lens in place, the person's new near point will be 0.23 m or 23 cm.

To know more about the corrective lens:

https://brainly.com/question/32985197

#SPJ12

Scientists can ascertain the isotope ratio and, consequently, the temperature at the time that layer was formed by examining the water molecules in each layer of ice.

With the aid of satellite, instrument, historical, and environmental records, scientists examine the Earth's climate and how it changes. Given that satellite and sensor lifespans have been relatively brief compared to Earth's life, using these data can be difficult.

Ice cores can help researchers reconstruct past greenhouse gas concentrations in the atmosphere, in addition to revealing past temperatures.

Therefore, The study of climatic evolution is known as climatology. This branch of science aids with people's comprehension of the atmospheric factors that influence weather patterns and temperature variations throughout time.

Learn more about air temperature here:

https://brainly.com/question/27754428

#SPJ1

2. The field representation of a positive charge would not be a good representation of the gravitational field around one mass because the electric force between charged particles is an electromagnetic force that behaves differently from the gravitational force between masses.

3. The field around two positive charges would not be a good representation of the gravitational field around two masses because the direction of the electric force between two charges is dependent on their relative positions and charges, whereas the direction of the gravitational force between two masses is always attractive and points toward the center of mass.

4, A good analogy for the process of work being done and electric potential energy being stored when positive and negative charges are moved farther apart would be the process of lifting a heavy object because work must be done to lift a heavy object and store gravitational potential energy, work must be done to separate positive and negative charges and store electric potential energy.

5. The gravitational force is the dominant force we notice in our everyday interactions and at planetary or larger scales because it depends only on the mass of the objects, which is typically much larger than their charge.

The gravitational force between two masses is proportional to the product of their masses and inversely proportional to the square of the distance between them, while the electric force between two charges is proportional to the product of their charges and inversely proportional to the square of the distance between them.

Gravitational force is a long-range force that acts between all masses, while the electric force is a short-range force that acts only between charged particles.

Learn more about gravitational force and electric force at: https://brainly.com/question/29765278

#SPJ1

To torque the nut to the required 41 N*m, the mechanic needs apply a force of 50.62 N to the end of the wrench.

The amount of torque needed to remove a nut from a car's wheel is 40.0 Nm. In order to remove the nut, the technician must use a minimum force of 40.0 Nm at the end of a 50.0 cm wrench.

We can apply the following formula to resolve this issue:

Torque = Force x Distance

where Torque is given as 41 N*m, Distance is the length of the wrench (81 cm = 0.81 m), and we want to find the Force.

So, we can rearrange the formula to solve for Force:

Force = Torque / Distance

Substituting the given values, we get:

Force = 41 N*m / 0.81 m

Force = 50.62 N

To know more about torque visit:-

https://brainly.com/question/6855614

#SPJ1

Mass in motion is quantified by momentum, which is the measure of how much weight is moving. It typically has the sign math

What does motion mean in mathematics?

In mathematics, movement, distance, velocity, impulse, and speed are used to explain motion. By securing a reference point to the environment or the observer, a body's motion can be seen. A body's motion is quantified by tracking how its location changes in relation to the perspective it occupies.

What types of motion may an object make?

The force acting on a body determines how it moves. These are some examples of various motion types. Translational: When an item goes along a route across all 3 components, it is of this type. Rotational: This sort of movement involves an object moving in a circular motion around a fixed axis.

To know more about motion visit:

https://brainly.com/question/22810476

#SPJ1

The electric field is given by the formula e for the sphere + e for the cylinder, which is equal to negative row r over 3 б+ ρr over 2 б +  ρr / s.

We prefer to find the strength of our electric field at r because distances are less than a. If an is less than a, we can think of our length cylinder as being coaxial with a galcene cylinder of radius r. Now, let's say that our cylinders resemble this. The charge contained within the cylinder is then equal to either row times v or row pi r, squared times l. Gauss law can then be used to calculate our electric field.

Since e da da is equal to q, enclosed divided by epsilon naught, e times integral of da is equal to q, enclosed divided by epsilon naught, so e times 2 π r l = rho π r, squared l divided by Epsilon naught, so e is equal to row r divided by 2 б. Since the average cylinder is positively charged, this Let's now think about a galcene sphere with radius r. This calcium sphere has a charge that is negative row times 4/3πr³.

Let's now determine the electric field at a place that is e times away from the centre. Negative row 4/3πr³/б (epsilon) = 4πr². As a result, some of these components of our electric field—which is negative, pi negative row, and r divided by 3 epsilon—are also present inside the hole. So, we do. The electric field is given by the formula e for the sphere + e for the cylinder, which is equal to negative row r over 3 epsilon plus row r over 2 epsilon plus row r divided by s.

Learn more about electric field here :

brainly.com/question/14884133

#SPJ4

Answer:

The light bulb would flash on and then immediately shut off.

Explanation:

As per the question the radius of the turn is approximately 33.25 meters.

An object travelling in a circular path will experience centripetal acceleration. It is always pointed in the direction of the circle's center, hence the formula:

a = v^2 / r

where a denotes the centripetal acceleration, v the object's speed, and r the circle's radius. According to this formula, the centripetal acceleration rises with the object's speed and falls with the circle's radius.

According to question:

We can start by using the centripetal acceleration formula:

a = v^2/r

where a is the centripetal acceleration, v is the velocity, and r is the radius of the turn.

In this case, we know that the centripetal acceleration is 1.5 times the free-fall acceleration, which is approximately 9.8 m/s^2. Therefore:

a = 1.5 * 9.8 m/s^2 = 14.7 m/s^2

We also know that the velocity of the falcon is 22 m/s. Plugging these values into the formula above, we get:

14.7 m/s^2 = (22 m/s)^2 / r

Solving for r, we get:

r = (22 m/s)^2 / 14.7 m/s^2 ≈ 33.25 m

Therefore, the radius of the turn is approximately 33.25 meters.

To know more about centripetal acceleration visit:

https://brainly.com/question/14465119

#SPJ4

Vega will be about 6.5 times brighter than Sirius after the cloud passes in front of it.

The flux received from a star is,

Flux = Luminosity / (4π × distance²)

According to the HYG Database, Sirius has a distance of about 8.6 light years from us, while Vega has a distance of about 25 light years.

Original flux received from Sirius as F(S), then the flux received after the cloud passes in front of it will be 1/3 F(S). To calculate the relative brightness of Vega compared to Sirius,

(d(Sirius) / d(Vega))² = F(Vega) / F(Sirius)

where d(Sirius) and d(Vega) are the distances between Sirius and Vega, respectively.

F(Vega) = F(Sirius) × (d(Vega) / d(Sirius))²

= (1/3 F(S)) × (25 / 8.6)²

≈ 6.5 × F(Sirius)

To know more about the flux, here

brainly.com/question/30609863

#SPJ4