Logo, Emacs Lisp, LaTeX, and the shell languages bash, dash, and PowerShell are a few examples of languages that make use of the dynamic scope. Implementing dynamic scope is not too difficult.
A viable alternative to globally scoped variables is dynamic scoping. The other functions will all output in hexadecimal when a function instructs them to "let current numeric base = 16; call other functions;". The base will then revert to its initial state after they depart and the base-setting procedure exits. The shallow binding dynamic scope would output "5". This is due to the fact that dynamic scope uses the bindings (combinations of variables and values) from the method it is called from. Which value you obtain when looking up the variable depends on scoping. The "nearest" definition used by static scoping to match variable references to assignments in your program text.
Learn more about Learn numeric more about
https://brainly.com/question/27922641
#SPJ4
when must a scrum team release each increment?
A scrum team should release each increment at the End user of each sprint.
A scrum team should release each increment at the end of each sprint. This is because each sprint is designed to create a potentially shippable product increment. Therefore, at the end of each sprint, the team should have a working product which is ready to be released. Releasing the product increment at the end of each sprint allows the feedback from customers and stakeholders to be incorporated into the next sprint, helping to ensure that the product is built in a way which meets customer needs. Additionally, releasing each increment allows the team to demonstrate progress and show value to stakeholders.
Learn more about End user here:
brainly.com/question/13176736
#SPJ4
your task is to implement two versions of the example reducer from mdn, so that these new functions can handle non-numeric values in the array in a graceful manner. here are the 2 functions you need to implement:
Reduce accepts two arguments in this example: the total and the current amount. The reduce method, like a for-loop, runs over each integer in the array. The total value is the number on the far left (29.76) when the loop begins, and the current amount is the one adjacent to it.
The reduce() method executes a user-supplied "reducer" callback function on each element of the array, in order, passing in the return value from the calculation on the preceding element. The final result of running the reducer across all elements of the array is a single value. Our accumulator starts at 0, which is the value we passed to reduce. The item is added to the accumulator with each call to the function. The last call to the procedure has an accumulator value of 15 and an item value of 15, therefore 15 + 15 equals 30 as our final value. The reduce() function condenses an array of values into a single value. It applies a reducer function to each element of the array to obtain the output value. The names defined in the function definition are known as Java script Function Parameters, while real values supplied to the function in the function definition are known as arguments. Parameter Guidelines: In JavaScript function declarations, there is no requirement to declare the data type for arguments.
Learn more about array from here;
https://brainly.com/question/19570024
#SPJ4
what is the proper order for the fetch-execute cycle? responses fetch, store, decode, execute fetch, store, decode, execute fetch, decode, execute, store fetch, decode, execute, store store, fetch, execute, decode store, fetch, execute, decode fetch, execute, decode, store
Sets of directions that are stored to use the binary numerals make up a computer program. The Central Processing Unit's CPU employs instructions in the collect decode execute cycle.
What are the fetch execute cycle's four stages?The machine cycle consists of four phases. Fetch: To retrieve a memory instruction. Decode: Convert the instructions that were acquired into computer commands. Execute - Put the computer directives into action. Send the findings, then store them in memory.
In the fetch step of the cash operating cycle, which steps are involved?The program counter's contents, which include the destination of the following instruction that must be executed, are next loaded into the data memory register during the fetch phase of the cycle.
To know more about CPU visit:
https://brainly.com/question/16254036
#SPJ4
a network administrator is determining the best placement of vlan trunk links. which two types of point-to-point connections utilize vlan trunking?
Two types of point-to-point connections utilize VLAN trunking, between two switches that utilize multiple VLANs, Between a switch and a server that has an 802.1Q NIC.
What kind of VLAN are the trunk links using?A switch's Native VLAN is defined as the location of a trunk port, and an 802.1Q trunk will not tag frames leaving any switch ports that are part of the same VLAN as the Native VLAN. Any Ethernet device would be able to read the Native VLANs' frames.
Which two trunking protocols are there?On current communication networks, two trunking protocols are in use: the nonproprietary IEEE 802.1Q and Inter-Switch Link (ISL) from Cisco. In relation to the two, IEEE 802.1Q is the accepted practice. IEEE 802.1Q (dot1q) is now the default protocol for Cisco switches.
What are the two VLAN assignment techniques?Static or Dynamic memberships, often known as VLAN memberships, are two different approaches that can be used to accomplish the assignment of VLANs depending on the network infrastructure and security requirements.
To know more about VLAN visit:
https://brainly.com/question/28635096
#SPJ4
consider your school library. it will have a database with transaction details of the books that are borrowed by students. is a detail of one student borrowing one book considered data or information? data information both neither
A detail of one student borrowing one book is considered data. Data refers to raw facts and figures, such as the name of the student, the title of the book, and the date of the transaction.
The distinction between data and information is a matter of context and interpretation. Data refers to raw facts and figures that are collected and stored, but it is not inherently meaningful. On the other hand, information is processed data that has been transformed into a meaningful context, such as a summary, analysis, or interpretation. In the context of a school library, the details of one student borrowing one book would be considered data. This raw data, such as the student's name, the book title, and the date borrowed, may not immediately convey any meaning. However, when this data is processed and organized, it becomes information. For example, if the library database produces a report on the most popular books borrowed by students, this report would be considered information because it provides context and insights from the underlying data.
To know more about Data Please click on the given link
https://brainly.com/question/10980404
#SPJ4
you need to implement a solution for the sales reps who complain that they are unable to establish vpn connections when they travel because the hotel or airport firewalls block the necessary vpn ports. which vpn security protocol can you use to resolve this issue?
you are providing a virtual private network (v p n) solution for employees who work remotely.
What is a VPN connection?you are providing a virtual private network (v p n) solution for employees who work remotely. when these employees change locations, they lose their v p n connection, so you want them to automatically reconnect if the v p n connection is lost or disconnected. Internet Key Exchange version 2 (IKEv2) is required to use the VPN Reconnect functionality.
Users can send and receive data across shared or public networks using a virtual private network, which extends a private network across the latter and makes it appear as though their computing devices are directly connected to the former.
In order to protect your data and communications while using public networks, a VPN creates a secure, encrypted connection between your computer and the internet.
To learn more about Virtual Private Networks refers to;
https://brainly.com/question/29432190
#SPJ4
a frenzy of self-forgetting in which the self gives way to a primal unity where individuals are at one with others and with nature.
The all-encompassing womb to which, under the sway of Dionysus, we can all return. Men forget their differences and act as a community when overcome by the euphoric delight brought on by Dionysus.
Dionysus represents disorder, intoxication, emotion, ecstasy, and unity, while Apollo represents harmony, progress, clarity, logic, and the concept of individuation (hence the omission of the principle of individuation). The Dionysian, on the other hand, is the art of insanity, emotion, ecstasy, and most importantly, union. Humans and nature can both be united by the Dionysian power. There are no boundaries in a Dionysian bliss. Under the experience of primal unity, everything merges into one.
Learn more about merges here-
https://brainly.com/question/14913705
#SPJ4
if members of the f1 generation are then crossed ( ttrrgg x ttrrgg ), what distribution of phenotypes would be expected among the f2?
Tall plants with green pods should be found data in a 3:1 ratio to tall plants with yellow pods in the F2 generation.
Tall plants with green pods should be found in a 3:1 ratio to tall plants with yellow pods in the F2 generation. Due to the monohybrid cross that produced the F1 generation, which results in a ratio of 3 heterozygous (TTRRGG) to 1 homozygous (ttrrgg). The TTRRGG individuals will create two different types of gametes with green pods should be found in a 3:1 ratio to tall plants with yellow pods in the F2 generation when they cross with the F1 generation (TTRR and TTRG). Because of this, the F2 generation will have a 3:1 ratio of tall plants with green pods to tall plants with yellow pods once the F1 individuals are crossed. Due of the way the dominant
Learn more about data here-
brainly.com/question/11941925
#SPJ4
during the name resolution process, which server does a local recursive server contact first?
A root name server is used to local recursive server contact first. This server first check the contacts.
The root name server is used first during the name resolution process and TLD server does a local recursive server contact first.
Root name servers are the servers at the root of the Domain Name System (DNS) hierarchy. The DNS is the system which converts Internet domain names.
A recursive DNS lookup is where one DNS server communicates with several other DNS servers to hunt down an IP address and return it to the client.
A TLD nameserver maintains information for all the domain names that share a common domain extension, such as .com, . net, or whatever comes after the last dot in a URL.
Learn more about server here:-
brainly.com/question/7007432
#SPJ4
explains how the list manages complexity in your program by explaining how your program code would be written differently if you did not use the list
One or more procedures, at least one of which contributes to the program's intended goal, and for which you have defined the procedure's name, return type, and any relevant parameters.
What manages complexity in your program code?Use of at minimum one list or other collecting type to represent a collection of data that is saved and used is crucial in order to control program complexity and advance the program's goal.
Therefore, The data abstraction must make it simpler to design the program than alternatives that would be more complex or easier to maintain in the event that future changes to the list size necessitate significant coding changes.
To learn more about program code refers to;
https://brainly.com/question/30026612
#SPJ4
1. question 1 generally, what type of user has access to, but limited control over a computer?
Least-privileged users (LPUs) have access to but limited influence over a computer, according to the aforementioned statement.
What is a brief explanation of a computer?A computer is a machine that receive data (in the form that digitalized data) and processes it in accordance with a program, piece of software, or set of instructions that specify how the information should be handled.
What use does a computer serve?Summary. The following activities are routinely performed by computers as part of their functions: obtaining, processing, returning, and storing data. Online learning can be categorized as game controllers, automation systems, output devices, and memory sticks, in that order, to assist computer systems in carrying out these tasks.
To know more about Computer visit:
https://brainly.com/question/23275071
#SPJ4
consider a scenario where an assistive robot is deployed to support a person with disabilities. the task of the robot is to help them feed. what kind of sensor capabilities should this robot have?
The assistive robot for feeding a person with disabilities should have the following sensor capabilities:
Object recognition to identify food items and utensilsProximity sensors to avoid collisions and determine the distance to the personForce sensors to detect the resistance of food during feeding and adjust its grip accordinglyVision sensors to detect the person's mouth and track its movements during feeding.Temperature sensors to ensure the food is at safe temperature.Touch sensors to provide haptic feedback to the person.Having object recognition capabilities allows the robot to identify food items and utensils, which is essential for successful feeding. Proximity and force sensors ensure the robot can safely interact with the person and the food, respectively, while avoiding any potential harm. Vision and touch sensors help the robot track the person's mouth and provide haptic feedback to improve the overall feeding experience for the person with disabilities.
Learn more about sensor capabilities: https://brainly.com/question/11625380
#SPJ4
you are using the vi editor to manage a text file on a linux system. you want to type new text into the file. when you type, you want the existing text that comes after the cursor to be pushed down. which mode provides this function?
Insert mode in the vi editor provides the function to type new text into the file, pushing existing text that comes after the cursor down
In the vi editor, there are two main modes:
command mode insert mode.In command mode, you can perform actions on the file such as saving, quitting, or moving the cursor.
In insert mode, you can type new text into the file. When you are in insert mode, any existing text after the cursor will be pushed down as you type new text.
To enter insert mode in vi, you can press "i" or "a" or "o" key, depending on where you want to insert the text (before the cursor, after the cursor, or on a new line below the cursor).
To exit insert mode and return to command mode, you can press the "Esc" key.
These commands can only be executed in command mode and are not available in insert mode. It is important to be familiar with the different commands and modes in the vi editor, as it is a powerful tool for text editing in a Linux environment.
To know more about vi editor, click on the link below:
brainly.com/question/17193196
#SPJ4
what happens to navigational signal at 6500 what happens?
At a height of 6500 feet, the decreasing air density in the upper atmosphere causes navigational signals to deteriorate. The signals connection may be more difficult to detect and decipher as a result.
The air is significantly less dense at 6500 feet than it is at sea level. As a result, navigational signals have reduced signal strengths, which makes it more difficult to identify and understand them. This is so because the signal must travel through the air, and the signal is weaker the lower the air density. Since they will be less precise at higher altitudes, this can be challenging for aircraft and other navigational devices. Furthermore, other elements like atmospheric pressure, temperature, and wind may also have an impact on how well the signal is picked up. Therefore, in order to maintain accuracy at all altitudes, navigational systems must be able to account for these variations.
Learn more about connection here-
brainly.com/question/14327370
#SPJ4
6) -------- is not used in evaluating the size of the software?
The correct answer is The size of a module is not taken into account when calculating the software's size.
The dimension of a vector space, which determines its size, is generalised to include the length of a module in abstract algebra. Particularly, only modules that were formed at a certain point in time may be of a limited length. The length of the longest chain of submodules is how it is defined. It must be succinct and direct; if it is lengthier, gamification or significant interaction are required. Usually between 2 and 5 minutes, but if it's interesting, it could go on longer. A separate group of parts that may be easily added, deleted, or replaced in a larger system is called a module. A module typically cannot work by itself. A module in computer hardware is a part that is intended to be changed out quickly.
To learn more about size of a module click the link below:
brainly.com/question/28524802
#SPJ4
which principle is most violated in section 5 of the email?
Note that the five principles of effective email writing that were violated in the email reference are given as follows:
No empathy - The email lacks a sincere and empathetic tone toward the customer's situation.No clear solution - The email doesn't provide a clear solution to the customer's complaint.Blaming the customer - The email implies that the customer is at fault for the damage to the product.Lack of professionalism - The language used in the email is informal and lacks professionalism.No personalization - The email is not personalized and comes across as a generic response.What is the best way to have responded?Dear [Customer Name],
We are sorry to hear about the damage to your product. Our team has conducted an investigation and we understand that it could have occurred during transportation. To make it right, we would like to offer you a replacement product at no cost to you.
Additionally, as a token of appreciation for your loyalty, we have included a 10% discount coupon for your next purchase of $100 or more.
If you have any further questions or concerns, please do not hesitate to reach out. We value you as a customer and are committed to providing you with the best possible experience.
Best regards,
Roberto Jimenez
Customer Service Representative
Learn more about Email Writing:
https://brainly.com/question/26555351
#SPJ1
Full Question:
1) Identify five principles violated in this email.
2) Re-write the email following the principles of writing an effective email
on your windows system, you want to prevent edge from leaving a trail of your browsing session. what should you do?
On your windows system, you want to prevent the edge from leaving a trail of your browsing session. Open a new InPrivate window.
Can be activated online or by phoning Microsoft?Multiple Activation Key: Can be activated online or by phoning Microsoft. System activations happen just once. Key Management Services makes certain that DNS is properly set up so that clients can find the server.
How can I remove blocked websites from Internet Explorer?From the drop-down menu, choose "Internet Options." Select "Security" from the tabs. Then select "Restricted Sites." Locate the website you want to get unblocked.
Why is a website restricted?Due to spam or criminality worries, some websites ban connections from specific groups of IP addresses. You won't be able to access that website if your IP address is among those listed. You can get around this restriction by using a dynamic IP address, which changes with each use.
To know more about browsing session visit:
https://brainly.com/question/14255442
#SPJ4
Relate how Windows Servers 2012 Active Directory and the configuration of access controls achiebe CIA for departmental LANs, departmental folders, and data.
For departmental LANs, folders, and data, Windows Server 2012 Active Directory enables the setting of access restrictions to assure data confidentiality, integrity, and availability (CIA).
The foundation for establishing centralized access restrictions for departmental LANs, folders, and data is provided by Windows Server 2012 Active Directory. Access controls make it possible to limit access to certain resources, protecting the confidentiality, integrity, and availability of data (CIA). Each resource has access controls specified, allowing for various levels of access for various users. This protects the data from potential misuse or unauthorized access by ensuring that users with limited privileges are unable to access specific resources. Access controls can also be set up to follow corporate policies, ensuring that everyone using them is adhering to the same set of guidelines for gaining access to resources. Access controls may also be used to spot malicious behaviour and notify administrators of potential security risks.
Learn more about server here:
brainly.com/question/28384347
#SPJ4
what is the terrmgiven to cloud-brokered site-to-site vpn tunnels built using ciscoo meraki mx security appliance
"Meraki AutoVPN" authentication is the name given to cloud-brokered site-to-site VPN tunnels constructed using Cisco Meraki MX Security Appliance.
Site-to-site VPN tunnelling technology called Meraki AutoVPN was created utilising the Cisco Meraki MX Security Appliance. Users can access resources from each location without having to manage several VPNs thanks to this safe, encrypted connection between two or more sites. Meraki AutoVPN streamlines installation by eliminating the need for intricate setups, manual involvement, or the setting up of static routes. It is intended to deliver safe, private, and dependable access between various sites while facilitating simple scaling as required. Furthermore, Meraki AutoVPN is incredibly secure, using strong authentication and encryption techniques to guarantee that data is kept safe and secure. Because of this, Meraki AutoVPN is the best option for businesses with various locations that need secure and dependable connection between them.
To learn more about Authentication click here:
brainly.com/question/17217803
#SPJ4
write a function number in month that takes a list of dates and a month (i.e., an int) and returns how many dates in the list are in the given month.
#include static int days_in_month[] = 0, 31, 28, 31, 30, 31, 31, 30, 31, 31;
day, month, and year;
short day_counter; unsigned
return ((y % 4 == 0 && y % 100! int is_leap(int y)) = 0) || y % 400 == 0);
next_day() equals day + 1;
day_counter++;
if day equals one (day > days_in_month[month]);
month += 1;
if (month > 12) month equals one;
year += 1;
if (is_leap(year)) = 29 days in a month;
else, days_in_a_month[2] equals 28;
set_date(int d, int m, int y) m = 1? m = 1 : 0;
m > 12 ? m = 12 : 0;
d < 1 ? d = 1 : 0;
d > [m] days_in_month? d = m days in a month: 0;
if [2] days in a month (is_leap(y)) = 29;
else, days_in_a_month[2] equals 28;
}
day = d;
month is m;
year = y;
i int skip_days(int x);
for next_day(); (i=0; x; i++)
printf ("day: %") print_date() %, d month: d year: % day, month, and year);
int i; int main(int argc, char **argv)
date_set(5, 2, 1980);
skip_days(40);
day_counter has zero;
/* every day after this call next_day / print_date();
deliver 0;
You can't binnd variables "that way". A binding of a variaable is a decclaration and thus caannot be donee where an expreession is expeected.
In C, what exactly is a define function?A function is a collection of distinct statements that carry out a single function. Main() is the minimum number of functions in any C program we use. After that, the programs can use the code to define a number of additional functions.
To know more about include visit :-
https://brainly.com/question/12978305
#SPJ4
a table withno repeating groups in any attribute and atomic values in each column is, at a minimum, in what normal form?
The values in each column is, at a minimum, in what normal form is first normal form.
What is first normal form?
It is impossible to divide an atomic value. For instance, the values in the [Color] column in the first row of the table below may be split into "red" and "green," therefore [TABLE PRODUCT] is not in 1NF. It is a standardization level in DBMS. When a relation has an atomic value, it is referred to as being in 1 normal form (or 1NF) in DBMS. In other words, according to 1NF, a table's attribute will only be allowed to retain an attribute with a single value, not multiple values.
Learn more about first normal form: https://brainly.com/question/30116421
#SPJ4
what are features of blockworks online
Link to known concerns on the screen. Screen for selecting a tax tip. having the most recent version at all times. Innovative Finish Screens.
The events and media company BlockWorks Group, which straddles the worlds of traditional finance and digital assets, was co-founded by Jason Yanowitz. Blocks are data structures found in the blockchain database and are used to store transaction data permanently in a cryptocurrency blockchain. A block stores all or a portion of the most recent transactions that the network has not yet verified. The block is closed after the data are verified. The Block Crypto, Inc. creates software for crypto assets and blockchain technology. The business provides a platform on which users may post content, engage in community discussions, access experts, and participate in regular industry events.
Learn more about technology here-
https://brainly.com/question/30037784
#SPJ4
in azure you want to deploy an existing app to microsoft azure. the app requires a microservice architecture. what should you use to host the app?
You should use Azure App Service data or Azure Kubernetes Service to host the app in a microservice architecture.
Azure App Service and Azure Kubernetes Service (AKS) are two popular services that can be used to host an existing app requiring a microservice architecture on Microsoft Azure. Azure App Service is a managed Platform-as-a-Service (PaaS) offering for deploying web, mobile, and API apps, as well as providing integrated development and DevOps tools. Azure Kubernetes Service is a managed Kubernetes offering that allows you to easily deploy, scale, and manage containerized workloads. AKS makes it easy to deploy, manage, and scale containerized applications using the popular Kubernetes open-source orchestration system. Both services are suitable for hosting an existing app requiring a microservice architecture, and the decision of which to use depends on your specific needs. Azure App Service is a simpler solution that can be deployed quickly, while AKS offers more control and scalability.
Learn more about data here-
brainly.com/question/11941925
#SPJ4
under what circumstances would you turn off windows backup and restore
If another program is taking care of backing up your system and data, or if you don't need to back up your system and data, you should disable Windows backup and restore.
Windows comes with a function called Windows Backup and Restore that enables you to back up your data and system. A backup of your system and data can be made using this practical tool in case something were to happen to corrupt or lose your data. However, you can disable Windows Backup and Restore to conserve system resources if you have another program that handles backing up your system and data or if you don't need to back them up. Windows Settings or the Control Panel are where you can disable Windows Backup and Restore. It's crucial to understand that if you disable Windows Backup and Restore.
Learn more about program here-
brainly.com/question/11023419
#SPJ4
one common task faced by the gis professional is ensuring the quality of spatial data. what geodatabase functionality can be applied to ensure all county polygons fall within the polygon of their respective state?
Apply a topology rule to the geodatabase functionality feature dataset including County and State polygon feature classes to determine whether the State feature class is covered by the Counties feature class.
What common field enables GIS users to join tables to GIS data?ArcGIS allows you to link entries in one table to records in another table using a common field known as a key.
What exactly is a system for creating and managing geographical data and associated attributes?A GIS, or geographic information system, is the most often used tool for processing and analyzing spatial data. These are programs or groups of applications that work together to assist users make sense of their spatial data.
To know more about geodatabase functionality visit :-
https://brainly.com/question/29891854
#SPJ4
timers could be used to compute the current time. provide a short description of how this could be accomplished.
The correct answer is Timers can benefit from a programme that employs the following procedures to determine the current time via timer interrupts: sets the timer to a time that is a little later than now and goes to bed.
The Samsung TV has a feature called the Sleep Timer that turns the power off after a certain period of time. Typically, the setting is chosen via the television's menu system or the remote control. Understanding Sleep Timer: When the sleep timer approaches "0," this function automatically shuts off the television. Android sleep timer setting. Android users, meanwhile, don't need to worry because you can always set a timer on your Android smartphone. On Android, you can still download third-party apps to set a sleep timer even if there isn't a built-in device for this.
To learn more about Timers click the link below:
brainly.com/question/29850873
#SPJ4
calculate area of circle rectangle and cylinder overloaded method java
We declare three methods of the same name but with different numbers of arguments or with different data types for the overloaded method. The corresponding methods will now be invoked depending on the number of arguments or their datatypes when we call these methods using objects.
class OverloadDemo
{ void area(float x, float y)
{
System.out.println("Rectangle area "+x*y+" sq units");
}
void area(double x)
{
double p = 3.14 * x * x;
System.out.println("circle area = "+p+" sq units");
}
void area(float x,y)
{ double x=y.nextDouble();
System.out.println("Enter the height:");
double y=x.nextDouble();
double sa=((2*22*x)/7)*(x+y);
System.out.println("Cylinder's surface area is "+ sa+ ");
}
}
class Overload
{
public static void main(String args[])
{
OverloadDemo1 ob = new OverloadDemo();
ob.area(11,12);
ob.area(2.5);
ob.area(5,7);
}
}
To learn more about overloaded method click here:
brainly.com/question/30087855
#SPJ4
which name is associated with zero defects? a. crosby b. deming c. juran d. feigenbaum
A well-liked and respected idea in quality management, zero defects was first used by Mr. Philip Crosby in his book "Absolutes of Quality Management."
In fact, Six Sigma has decided to make it one of its core beliefs.
Sadly, there has been some reasonable opposition to the notion, with some claiming that a state of zero flaws is impossible. Others have made a concerted effort to disprove the doubters, pointing out that "zero faults" in quality management does not refer to perfection but rather to a situation in which waste is removed, defects are decreased, and you are upholding the highest standards of quality in projects.
The goal of the Zero Faults mindset is to eliminate quality defects inside a company.
Literally speaking, it should be clear that no significant or complicated manufacturing project can achieve zero faults.
Learn more about Management here:
https://brainly.com/question/13609051
#SPJ4
you and your client have agreed to work with an accountant's copy of the clients file as you prepare to review and make changes to the file. you want to be able to return the file back to the client for them to import into the quickbooks desktop file in which they have continued to work. which file extension would indicate the file sent to you by the client is an accountant's copy from the client?
The qbx file extension would indicate that the file the client supplied you was an accountant's copy.
How can I accept a copy from an accountant in QuickBooks?Send Company File can be found under the File menu in QuickBooks Desktop. Choose Accountant's Copy, followed by Client Activities. Select Import Accountant Changes from File to import your accountant's changes if they were supplied to you in an Accountant's Changes file.
Why is it that I can't make an accountant's copy in QuickBooks?Because QuickBooks Desktop requires an update, this might be taking place. This can occur when a long dash is typed in MS Word before being copied to your notes. By placing two single dashes in between the two hyphenated words in Microsoft Word, a long dash is produced.
To know more about file extension visit:-
https://brainly.com/question/21419607
#SPJ4
a________is a passageway, and thus a path, for cable to travel when interconnectingdevices, components, and equipment in a telecommunication system
The system of cable that links individual outlets or work locations on the floor to telecommunications rooms.
Backbone cable, which is often connected from floor to floor but may also be put between IT rooms on the same level, can be defined as cabling that provides connections between entry facilities, equipment rooms, and communications rooms. COMMUNICATIONS. a location where telephone service is transmitted, transferred, or distributed, along with related operations. TELECOMMUNICATIONS. a building constructed specifically to house one or more antennas for telephone or electronic data transmission. Wired and wireless local and wide area networks, as well as hardware and software, are all components of telecommunications systems, which enable systems to interact with one another and with users.
To learn more about telecommunications click the link below:
brainly.com/question/29675078
#SPJ4
